au1xxx-ide.c 19.7 KB
Newer Older
P
Pete Popov 已提交
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35
/*
 * linux/drivers/ide/mips/au1xxx-ide.c  version 01.30.00        Aug. 02 2005
 *
 * BRIEF MODULE DESCRIPTION
 * AMD Alchemy Au1xxx IDE interface routines over the Static Bus
 *
 * Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
 *
 * This program is free software; you can redistribute it and/or modify it under
 * the terms of the GNU General Public License as published by the Free Software
 * Foundation; either version 2 of the License, or (at your option) any later
 * version.
 *
 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
 * FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 * You should have received a copy of the GNU General Public License along with
 * this program; if not, write to the Free Software Foundation, Inc.,
 * 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
 *       Interface and Linux Device Driver" Application Note.
 */
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/delay.h>
J
Jordan Crouse 已提交
36 37
#include <linux/platform_device.h>

P
Pete Popov 已提交
38 39 40 41 42 43
#include <linux/init.h>
#include <linux/ide.h>
#include <linux/sysdev.h>

#include <linux/dma-mapping.h>

J
Jordan Crouse 已提交
44 45
#include "ide-timing.h"

P
Pete Popov 已提交
46 47 48 49 50 51 52 53
#include <asm/io.h>
#include <asm/mach-au1x00/au1xxx.h>
#include <asm/mach-au1x00/au1xxx_dbdma.h>

#include <asm/mach-au1x00/au1xxx_ide.h>

#define DRV_NAME	"au1200-ide"
#define DRV_VERSION	"1.0"
J
Jordan Crouse 已提交
54
#define DRV_AUTHOR	"Enrico Walther <enrico.walther@amd.com> / Pete Popov <ppopov@embeddedalley.com>"
P
Pete Popov 已提交
55

J
Jordan Crouse 已提交
56 57
/* enable the burstmode in the dbdma */
#define IDE_AU1XXX_BURSTMODE	1
P
Pete Popov 已提交
58

J
Jordan Crouse 已提交
59 60
static _auide_hwif auide_hwif;
static int dbdma_init_done;
P
Pete Popov 已提交
61 62 63

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)

J
Jordan Crouse 已提交
64
void auide_insw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
65
{
J
Jordan Crouse 已提交
66 67 68
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
69

J
Jordan Crouse 已提交
70 71 72 73 74 75 76 77 78 79
	if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, 
			   DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->rx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
80 81
}

J
Jordan Crouse 已提交
82
void auide_outsw(unsigned long port, void *addr, u32 count)
P
Pete Popov 已提交
83
{
J
Jordan Crouse 已提交
84 85 86
	_auide_hwif *ahwif = &auide_hwif;
	chan_tab_t *ctp;
	au1x_ddma_desc_t *dp;
P
Pete Popov 已提交
87

J
Jordan Crouse 已提交
88 89 90 91 92 93 94 95 96 97
	if(!put_source_flags(ahwif->tx_chan, (void*)addr,
			     count << 1, DDMA_FLAGS_NOIE)) {
		printk(KERN_ERR "%s failed %d\n", __FUNCTION__, __LINE__);
		return;
	}
	ctp = *((chan_tab_t **)ahwif->tx_chan);
	dp = ctp->cur_ptr;
	while (dp->dscr_cmd0 & DSCR_CMD0_V)
		;
	ctp->cur_ptr = au1xxx_ddma_get_nextptr_virt(dp);
P
Pete Popov 已提交
98 99 100 101 102 103
}

#endif

static void auide_tune_drive(ide_drive_t *drive, byte pio)
{
J
Jordan Crouse 已提交
104 105 106 107 108
	int mem_sttime;
	int mem_stcfg;
	u8 speed;

	/* get the best pio mode for the drive */
109
	pio = ide_get_best_pio_mode(drive, pio, 4);
J
Jordan Crouse 已提交
110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175

	printk(KERN_INFO "%s: setting Au1XXX IDE to PIO mode%d\n",
	       drive->name, pio);

	mem_sttime = 0;
	mem_stcfg  = au_readl(MEM_STCFG2);

	/* set pio mode! */
	switch(pio) {
	case 0:
		mem_sttime = SBC_IDE_TIMING(PIO0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO0_TCSOE | SBC_IDE_PIO0_TOECS;
		break;

	case 1:
		mem_sttime = SBC_IDE_TIMING(PIO1);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO1_TCSOE | SBC_IDE_PIO1_TOECS;
		break;

	case 2:
		mem_sttime = SBC_IDE_TIMING(PIO2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO2_TCSOE | SBC_IDE_PIO2_TOECS;
		break;

	case 3:
		mem_sttime = SBC_IDE_TIMING(PIO3);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO3_TCSOE | SBC_IDE_PIO3_TOECS;

		break;

	case 4:
		mem_sttime = SBC_IDE_TIMING(PIO4);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_PIO4_TCSOE | SBC_IDE_PIO4_TOECS;
		break;
	}

	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);

	speed = pio + XFER_PIO_0;
	ide_config_drive_speed(drive, speed);
P
Pete Popov 已提交
176 177 178 179
}

static int auide_tune_chipset (ide_drive_t *drive, u8 speed)
{
J
Jordan Crouse 已提交
180 181
	int mem_sttime;
	int mem_stcfg;
P
Pete Popov 已提交
182

J
Jordan Crouse 已提交
183 184
	mem_sttime = 0;
	mem_stcfg  = au_readl(MEM_STCFG2);
P
Pete Popov 已提交
185

J
Jordan Crouse 已提交
186 187 188 189
	if (speed >= XFER_PIO_0 && speed <= XFER_PIO_4) {
		auide_tune_drive(drive, speed - XFER_PIO_0);
		return 0;
	}
190

J
Jordan Crouse 已提交
191
	switch(speed) {
P
Pete Popov 已提交
192
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222
	case XFER_MW_DMA_2:
		mem_sttime = SBC_IDE_TIMING(MDMA2);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA2_TCSOE | SBC_IDE_MDMA2_TOECS;

		break;
	case XFER_MW_DMA_1:
		mem_sttime = SBC_IDE_TIMING(MDMA1);

		/* set configuration for RCS2# */
		mem_stcfg &= ~TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA1_TCSOE | SBC_IDE_MDMA1_TOECS;

		break;
	case XFER_MW_DMA_0:
		mem_sttime = SBC_IDE_TIMING(MDMA0);

		/* set configuration for RCS2# */
		mem_stcfg |= TS_MASK;
		mem_stcfg &= ~TCSOE_MASK;
		mem_stcfg &= ~TOECS_MASK;
		mem_stcfg |= SBC_IDE_MDMA0_TCSOE | SBC_IDE_MDMA0_TOECS;

		break;
P
Pete Popov 已提交
223
#endif
J
Jordan Crouse 已提交
224 225 226
	default:
		return 1;
	}
227 228

	if (ide_config_drive_speed(drive, speed))
J
Jordan Crouse 已提交
229
		return 1;
P
Pete Popov 已提交
230

J
Jordan Crouse 已提交
231 232
	au_writel(mem_sttime,MEM_STTIME2);
	au_writel(mem_stcfg,MEM_STCFG2);
P
Pete Popov 已提交
233

J
Jordan Crouse 已提交
234
	return 0;
P
Pete Popov 已提交
235 236 237 238 239 240
}

/*
 * Multi-Word DMA + DbDMA functions
 */

J
Jordan Crouse 已提交
241
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
P
Pete Popov 已提交
242 243 244

static int auide_build_sglist(ide_drive_t *drive,  struct request *rq)
{
J
Jordan Crouse 已提交
245 246 247
	ide_hwif_t *hwif = drive->hwif;
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg = hwif->sg_table;
P
Pete Popov 已提交
248

J
Jordan Crouse 已提交
249
	ide_map_sg(drive, rq);
P
Pete Popov 已提交
250

J
Jordan Crouse 已提交
251 252 253 254
	if (rq_data_dir(rq) == READ)
		hwif->sg_dma_direction = DMA_FROM_DEVICE;
	else
		hwif->sg_dma_direction = DMA_TO_DEVICE;
P
Pete Popov 已提交
255

J
Jordan Crouse 已提交
256 257
	return dma_map_sg(ahwif->dev, sg, hwif->sg_nents,
			  hwif->sg_dma_direction);
P
Pete Popov 已提交
258 259 260 261
}

static int auide_build_dmatable(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311
	int i, iswrite, count = 0;
	ide_hwif_t *hwif = HWIF(drive);

	struct request *rq = HWGROUP(drive)->rq;

	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
	struct scatterlist *sg;

	iswrite = (rq_data_dir(rq) == WRITE);
	/* Save for interrupt context */
	ahwif->drive = drive;

	/* Build sglist */
	hwif->sg_nents = i = auide_build_sglist(drive, rq);

	if (!i)
		return 0;

	/* fill the descriptors */
	sg = hwif->sg_table;
	while (i && sg_dma_len(sg)) {
		u32 cur_addr;
		u32 cur_len;

		cur_addr = sg_dma_address(sg);
		cur_len = sg_dma_len(sg);

		while (cur_len) {
			u32 flags = DDMA_FLAGS_NOIE;
			unsigned int tc = (cur_len < 0xfe00)? cur_len: 0xfe00;

			if (++count >= PRD_ENTRIES) {
				printk(KERN_WARNING "%s: DMA table too small\n",
				       drive->name);
				goto use_pio_instead;
			}

			/* Lets enable intr for the last descriptor only */
			if (1==i)
				flags = DDMA_FLAGS_IE;
			else
				flags = DDMA_FLAGS_NOIE;

			if (iswrite) {
				if(!put_source_flags(ahwif->tx_chan, 
						     (void*)(page_address(sg->page) 
							     + sg->offset), 
						     tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
312
				}
J
Jordan Crouse 已提交
313
			} else 
P
Pete Popov 已提交
314
			{
J
Jordan Crouse 已提交
315 316 317 318 319 320
				if(!put_dest_flags(ahwif->rx_chan, 
						   (void*)(page_address(sg->page) 
							   + sg->offset), 
						   tc, flags)) { 
					printk(KERN_ERR "%s failed %d\n", 
					       __FUNCTION__, __LINE__);
P
Pete Popov 已提交
321
				}
J
Jordan Crouse 已提交
322
			}
P
Pete Popov 已提交
323

J
Jordan Crouse 已提交
324 325 326 327 328 329
			cur_addr += tc;
			cur_len -= tc;
		}
		sg++;
		i--;
	}
P
Pete Popov 已提交
330

J
Jordan Crouse 已提交
331 332
	if (count)
		return 1;
P
Pete Popov 已提交
333

J
Jordan Crouse 已提交
334 335 336 337 338
 use_pio_instead:
	dma_unmap_sg(ahwif->dev,
		     hwif->sg_table,
		     hwif->sg_nents,
		     hwif->sg_dma_direction);
P
Pete Popov 已提交
339

J
Jordan Crouse 已提交
340
	return 0; /* revert to PIO for this request */
P
Pete Popov 已提交
341 342 343 344
}

static int auide_dma_end(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
345 346
	ide_hwif_t *hwif = HWIF(drive);
	_auide_hwif *ahwif = (_auide_hwif*)hwif->hwif_data;
P
Pete Popov 已提交
347

J
Jordan Crouse 已提交
348 349 350 351 352
	if (hwif->sg_nents) {
		dma_unmap_sg(ahwif->dev, hwif->sg_table, hwif->sg_nents,
			     hwif->sg_dma_direction);
		hwif->sg_nents = 0;
	}
P
Pete Popov 已提交
353

J
Jordan Crouse 已提交
354
	return 0;
P
Pete Popov 已提交
355 356 357 358 359 360 361 362 363
}

static void auide_dma_start(ide_drive_t *drive )
{
}


static void auide_dma_exec_cmd(ide_drive_t *drive, u8 command)
{
J
Jordan Crouse 已提交
364 365 366
	/* issue cmd to drive */
	ide_execute_command(drive, command, &ide_dma_intr,
			    (2*WAIT_CMD), NULL);
P
Pete Popov 已提交
367 368 369
}

static int auide_dma_setup(ide_drive_t *drive)
J
Jordan Crouse 已提交
370 371
{       	
	struct request *rq = HWGROUP(drive)->rq;
P
Pete Popov 已提交
372

J
Jordan Crouse 已提交
373 374 375 376
	if (!auide_build_dmatable(drive)) {
		ide_map_sg(drive, rq);
		return 1;
	}
P
Pete Popov 已提交
377

J
Jordan Crouse 已提交
378 379
	drive->waiting_for_dma = 1;
	return 0;
P
Pete Popov 已提交
380 381 382 383
}

static int auide_dma_check(ide_drive_t *drive)
{
384
	u8 speed = ide_max_dma_mode(drive);
J
Jordan Crouse 已提交
385 386 387 388 389 390 391 392 393 394

	if( dbdma_init_done == 0 ){
		auide_hwif.white_list = ide_in_drive_list(drive->id,
							  dma_white_list);
		auide_hwif.black_list = ide_in_drive_list(drive->id,
							  dma_black_list);
		auide_hwif.drive = drive;
		auide_ddma_init(&auide_hwif);
		dbdma_init_done = 1;
	}
P
Pete Popov 已提交
395

J
Jordan Crouse 已提交
396 397 398 399 400 401
	/* Is the drive in our DMA black list? */

	if ( auide_hwif.black_list ) {
		drive->using_dma = 0;

		/* Borrowed the warning message from ide-dma.c */
P
Pete Popov 已提交
402

J
Jordan Crouse 已提交
403 404 405 406 407 408 409
		printk(KERN_WARNING "%s: Disabling DMA for %s (blacklisted)\n",
		       drive->name, drive->id->model);	       
	}
	else
		drive->using_dma = 1;

	if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
410
		return 0;
J
Jordan Crouse 已提交
411

412
	return -1;
P
Pete Popov 已提交
413 414 415
}

static int auide_dma_test_irq(ide_drive_t *drive)
J
Jordan Crouse 已提交
416 417 418
{	
	if (drive->waiting_for_dma == 0)
		printk(KERN_WARNING "%s: ide_dma_test_irq \
P
Pete Popov 已提交
419 420
                                     called while not waiting\n", drive->name);

J
Jordan Crouse 已提交
421 422
	/* If dbdma didn't execute the STOP command yet, the
	 * active bit is still set
P
Pete Popov 已提交
423
	 */
J
Jordan Crouse 已提交
424 425 426
	drive->waiting_for_dma++;
	if (drive->waiting_for_dma >= DMA_WAIT_TIMEOUT) {
		printk(KERN_WARNING "%s: timeout waiting for ddma to \
P
Pete Popov 已提交
427
                                     complete\n", drive->name);
J
Jordan Crouse 已提交
428 429 430 431
		return 1;
	}
	udelay(10);
	return 0;
P
Pete Popov 已提交
432 433
}

434
static void auide_dma_host_on(ide_drive_t *drive)
P
Pete Popov 已提交
435 436 437 438 439
{
}

static int auide_dma_on(ide_drive_t *drive)
{
J
Jordan Crouse 已提交
440
	drive->using_dma = 1;
441 442

	return 0;
P
Pete Popov 已提交
443 444
}

445
static void auide_dma_host_off(ide_drive_t *drive)
P
Pete Popov 已提交
446 447 448
{
}

449
static void auide_dma_off_quietly(ide_drive_t *drive)
P
Pete Popov 已提交
450
{
J
Jordan Crouse 已提交
451
	drive->using_dma = 0;
P
Pete Popov 已提交
452 453
}

454
static void auide_dma_lost_irq(ide_drive_t *drive)
P
Pete Popov 已提交
455
{
J
Jordan Crouse 已提交
456
	printk(KERN_ERR "%s: IRQ lost\n", drive->name);
P
Pete Popov 已提交
457 458
}

459
static void auide_ddma_tx_callback(int irq, void *param)
P
Pete Popov 已提交
460
{
J
Jordan Crouse 已提交
461 462
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
P
Pete Popov 已提交
463 464
}

465
static void auide_ddma_rx_callback(int irq, void *param)
P
Pete Popov 已提交
466
{
J
Jordan Crouse 已提交
467 468 469 470 471
	_auide_hwif *ahwif = (_auide_hwif*)param;
	ahwif->drive->waiting_for_dma = 0;
}

#endif /* end CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
P
Pete Popov 已提交
472

J
Jordan Crouse 已提交
473 474 475 476 477 478 479 480 481
static void auide_init_dbdma_dev(dbdev_tab_t *dev, u32 dev_id, u32 tsize, u32 devwidth, u32 flags)
{
	dev->dev_id          = dev_id;
	dev->dev_physaddr    = (u32)AU1XXX_ATA_PHYS_ADDR;
	dev->dev_intlevel    = 0;
	dev->dev_intpolarity = 0;
	dev->dev_tsize       = tsize;
	dev->dev_devwidth    = devwidth;
	dev->dev_flags       = flags;
P
Pete Popov 已提交
482
}
J
Jordan Crouse 已提交
483 484
  
#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
P
Pete Popov 已提交
485

486
static void auide_dma_timeout(ide_drive_t *drive)
P
Pete Popov 已提交
487
{
488
	ide_hwif_t *hwif = HWIF(drive);
P
Pete Popov 已提交
489

J
Jordan Crouse 已提交
490
	printk(KERN_ERR "%s: DMA timeout occurred: ", drive->name);
P
Pete Popov 已提交
491

492 493
	if (hwif->ide_dma_test_irq(drive))
		return;
P
Pete Popov 已提交
494

495
	hwif->ide_dma_end(drive);
P
Pete Popov 已提交
496
}
J
Jordan Crouse 已提交
497
					
P
Pete Popov 已提交
498

J
Jordan Crouse 已提交
499 500 501 502 503
static int auide_ddma_init(_auide_hwif *auide) {
	
	dbdev_tab_t source_dev_tab, target_dev_tab;
	u32 dev_id, tsize, devwidth, flags;
	ide_hwif_t *hwif = auide->hwif;
P
Pete Popov 已提交
504

J
Jordan Crouse 已提交
505
	dev_id   = AU1XXX_ATA_DDMA_REQ;
P
Pete Popov 已提交
506

J
Jordan Crouse 已提交
507 508 509 510 511 512 513 514 515 516 517
	if (auide->white_list || auide->black_list) {
		tsize    = 8;
		devwidth = 32;
	}
	else { 
		tsize    = 1;
		devwidth = 16;
		
		printk(KERN_ERR "au1xxx-ide: %s is not on ide driver whitelist.\n",auide_hwif.drive->id->model);
		printk(KERN_ERR "            please read 'Documentation/mips/AU1xxx_IDE.README'");
	}
P
Pete Popov 已提交
518

J
Jordan Crouse 已提交
519 520
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
P
Pete Popov 已提交
521
#else
J
Jordan Crouse 已提交
522
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
523 524
#endif

J
Jordan Crouse 已提交
525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      dev_id,
			      tsize, devwidth, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* We also need to add a target device for the DMA */
	auide_init_dbdma_dev( &target_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      tsize, devwidth, DEV_FLAGS_ANYUSE);
	auide->target_dev_id = au1xxx_ddma_add_device(&target_dev_tab);	
 
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(auide->target_dev_id,
						 auide->tx_dev_id,
						 auide_ddma_tx_callback,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 auide->target_dev_id,
						 auide_ddma_rx_callback,
						 (void*)auide);

	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	hwif->dmatable_cpu = dma_alloc_coherent(auide->dev,
						PRD_ENTRIES * PRD_BYTES,        /* 1 Page */
						&hwif->dmatable_dma, GFP_KERNEL);
	
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 
	return 0;
} 
P
Pete Popov 已提交
568
#else
J
Jordan Crouse 已提交
569 570 571 572 573
 
static int auide_ddma_init( _auide_hwif *auide )
{
	dbdev_tab_t source_dev_tab;
	int flags;
P
Pete Popov 已提交
574

J
Jordan Crouse 已提交
575 576 577 578
#ifdef IDE_AU1XXX_BURSTMODE 
	flags = DEV_FLAGS_SYNC | DEV_FLAGS_BURSTABLE;
#else
	flags = DEV_FLAGS_SYNC;
P
Pete Popov 已提交
579 580
#endif

J
Jordan Crouse 已提交
581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612
	/* setup dev_tab for tx channel */
	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_OUT | flags);
 	auide->tx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );

	auide_init_dbdma_dev( &source_dev_tab,
			      (u32)DSCR_CMD0_ALWAYS,
			      8, 32, DEV_FLAGS_IN | flags);
 	auide->rx_dev_id = au1xxx_ddma_add_device( &source_dev_tab );
	
	/* Get a channel for TX */
	auide->tx_chan = au1xxx_dbdma_chan_alloc(DSCR_CMD0_ALWAYS,
						 auide->tx_dev_id,
						 NULL,
						 (void*)auide);
 
	/* Get a channel for RX */
	auide->rx_chan = au1xxx_dbdma_chan_alloc(auide->rx_dev_id,
						 DSCR_CMD0_ALWAYS,
						 NULL,
						 (void*)auide);
 
	auide->tx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->tx_chan,
							     NUM_DESCRIPTORS);
	auide->rx_desc_head = (void*)au1xxx_dbdma_ring_alloc(auide->rx_chan,
							     NUM_DESCRIPTORS);
 
	au1xxx_dbdma_start( auide->tx_chan );
	au1xxx_dbdma_start( auide->rx_chan );
 	
	return 0;
P
Pete Popov 已提交
613
}
J
Jordan Crouse 已提交
614
#endif
P
Pete Popov 已提交
615 616 617

static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
{
J
Jordan Crouse 已提交
618 619 620 621 622 623 624 625 626 627
	int i;
	unsigned long *ata_regs = hw->io_ports;

	/* FIXME? */
	for (i = 0; i < IDE_CONTROL_OFFSET; i++) {
		*ata_regs++ = ahwif->regbase + (i << AU1XXX_ATA_REG_OFFSET);
	}

	/* set the Alternative Status register */
	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
P
Pete Popov 已提交
628 629 630 631 632
}

static int au_ide_probe(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
J
Jordan Crouse 已提交
633 634
	_auide_hwif *ahwif = &auide_hwif;
	ide_hwif_t *hwif;
P
Pete Popov 已提交
635
	struct resource *res;
636
	hw_regs_t *hw;
P
Pete Popov 已提交
637 638 639
	int ret = 0;

#if defined(CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA)
J
Jordan Crouse 已提交
640
	char *mode = "MWDMA2";
P
Pete Popov 已提交
641
#elif defined(CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA)
J
Jordan Crouse 已提交
642
	char *mode = "PIO+DDMA(offload)";
P
Pete Popov 已提交
643 644
#endif

J
Jordan Crouse 已提交
645 646
	memset(&auide_hwif, 0, sizeof(_auide_hwif));
	auide_hwif.dev                  = 0;
P
Pete Popov 已提交
647 648 649 650 651 652 653 654 655

	ahwif->dev = dev;
	ahwif->irq = platform_get_irq(pdev, 0);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);

	if (res == NULL) {
		pr_debug("%s %d: no base address\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
656 657 658 659 660
		goto out;
	}
	if (ahwif->irq < 0) {
		pr_debug("%s %d: no IRQ\n", DRV_NAME, pdev->id);
		ret = -ENODEV;
P
Pete Popov 已提交
661 662 663
		goto out;
	}

J
Jordan Crouse 已提交
664
	if (!request_mem_region (res->start, res->end-res->start, pdev->name)) {
P
Pete Popov 已提交
665
		pr_debug("%s: request_mem_region failed\n", DRV_NAME);
J
Jordan Crouse 已提交
666
		ret =  -EBUSY;
P
Pete Popov 已提交
667
		goto out;
J
Jordan Crouse 已提交
668
	}
P
Pete Popov 已提交
669 670 671 672 673 674 675

	ahwif->regbase = (u32)ioremap(res->start, res->end-res->start);
	if (ahwif->regbase == 0) {
		ret = -ENOMEM;
		goto out;
	}

J
Jordan Crouse 已提交
676 677 678
	/* FIXME:  This might possibly break PCMCIA IDE devices */

	hwif                            = &ide_hwifs[pdev->id];
679
	hw 				= &hwif->hw;
J
Jordan Crouse 已提交
680 681
	hwif->irq = hw->irq             = ahwif->irq;
	hwif->chipset                   = ide_au1xxx;
P
Pete Popov 已提交
682

J
Jordan Crouse 已提交
683
	auide_setup_ports(hw, ahwif);
P
Pete Popov 已提交
684 685
	memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports));

J
Jordan Crouse 已提交
686
	hwif->ultra_mask                = 0x0;  /* Disable Ultra DMA */
P
Pete Popov 已提交
687
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
J
Jordan Crouse 已提交
688 689
	hwif->mwdma_mask                = 0x07; /* Multimode-2 DMA  */
	hwif->swdma_mask                = 0x00;
P
Pete Popov 已提交
690
#else
J
Jordan Crouse 已提交
691 692 693 694
	hwif->mwdma_mask                = 0x0;
	hwif->swdma_mask                = 0x0;
#endif

B
Bartlomiej Zolnierkiewicz 已提交
695 696
	hwif->pio_mask = ATA_PIO4;

J
Jordan Crouse 已提交
697 698 699 700 701 702
	hwif->noprobe = 0;
	hwif->drives[0].unmask          = 1;
	hwif->drives[1].unmask          = 1;

	/* hold should be on in all cases */
	hwif->hold                      = 1;
703 704

	hwif->mmio  = 1;
J
Jordan Crouse 已提交
705 706 707 708 709 710 711 712

	/* If the user has selected DDMA assisted copies,
	   then set up a few local I/O function entry points 
	*/

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA	
	hwif->INSW                      = auide_insw;
	hwif->OUTSW                     = auide_outsw;
P
Pete Popov 已提交
713
#endif
J
Jordan Crouse 已提交
714 715 716

	hwif->tuneproc                  = &auide_tune_drive;
	hwif->speedproc                 = &auide_tune_chipset;
P
Pete Popov 已提交
717 718

#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
719
	hwif->dma_off_quietly		= &auide_dma_off_quietly;
720
	hwif->dma_timeout		= &auide_dma_timeout;
J
Jordan Crouse 已提交
721 722 723 724 725 726 727

	hwif->ide_dma_check             = &auide_dma_check;
	hwif->dma_exec_cmd              = &auide_dma_exec_cmd;
	hwif->dma_start                 = &auide_dma_start;
	hwif->ide_dma_end               = &auide_dma_end;
	hwif->dma_setup                 = &auide_dma_setup;
	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
728
	hwif->dma_host_off		= &auide_dma_host_off;
729
	hwif->dma_host_on		= &auide_dma_host_on;
730
	hwif->dma_lost_irq		= &auide_dma_lost_irq;
J
Jordan Crouse 已提交
731 732 733 734 735 736 737
	hwif->ide_dma_on                = &auide_dma_on;

	hwif->autodma                   = 1;
	hwif->drives[0].autodma         = hwif->autodma;
	hwif->drives[1].autodma         = hwif->autodma;
	hwif->atapi_dma                 = 1;

P
Pete Popov 已提交
738
#else /* !CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA */
J
Jordan Crouse 已提交
739 740 741 742 743 744 745 746
	hwif->autodma                   = 0;
	hwif->channel                   = 0;
	hwif->hold                      = 1;
	hwif->select_data               = 0;    /* no chipset-specific code */
	hwif->config_data               = 0;    /* no chipset-specific code */

	hwif->drives[0].autodma         = 0;
	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
P
Pete Popov 已提交
747
#endif
J
Jordan Crouse 已提交
748
	hwif->drives[0].no_io_32bit     = 1;   
P
Pete Popov 已提交
749

J
Jordan Crouse 已提交
750 751
	auide_hwif.hwif                 = hwif;
	hwif->hwif_data                 = &auide_hwif;
P
Pete Popov 已提交
752

J
Jordan Crouse 已提交
753 754 755
#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA           
	auide_ddma_init(&auide_hwif);
	dbdma_init_done = 1;
P
Pete Popov 已提交
756 757 758
#endif

	probe_hwif_init(hwif);
759 760 761

	ide_proc_register_port(hwif);

P
Pete Popov 已提交
762 763
	dev_set_drvdata(dev, hwif);

J
Jordan Crouse 已提交
764
	printk(KERN_INFO "Au1xxx IDE(builtin) configured for %s\n", mode );
P
Pete Popov 已提交
765

J
Jordan Crouse 已提交
766 767
 out:
	return ret;
P
Pete Popov 已提交
768 769 770 771 772 773 774
}

static int au_ide_remove(struct device *dev)
{
	struct platform_device *pdev = to_platform_device(dev);
	struct resource *res;
	ide_hwif_t *hwif = dev_get_drvdata(dev);
J
Jordan Crouse 已提交
775
	_auide_hwif *ahwif = &auide_hwif;
P
Pete Popov 已提交
776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798

	ide_unregister(hwif - ide_hwifs);

	iounmap((void *)ahwif->regbase);

	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	release_mem_region(res->start, res->end - res->start);

	return 0;
}

static struct device_driver au1200_ide_driver = {
	.name		= "au1200-ide",
	.bus		= &platform_bus_type,
	.probe 		= au_ide_probe,
	.remove		= au_ide_remove,
};

static int __init au_ide_init(void)
{
	return driver_register(&au1200_ide_driver);
}

J
Jordan Crouse 已提交
799
static void __exit au_ide_exit(void)
P
Pete Popov 已提交
800 801 802 803 804 805 806 807 808
{
	driver_unregister(&au1200_ide_driver);
}

MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AU1200 IDE driver");

module_init(au_ide_init);
module_exit(au_ide_exit);