/* * Copyright (c) 2012, 2013, Oracle and/or its affiliates. All rights reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. Oracle designates this * particular file as subject to the "Classpath" exception as provided * by Oracle in the LICENSE file that accompanied this code. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA * or visit www.oracle.com if you need additional information or have any * questions. */ /* * This file is available under and governed by the GNU General Public * License version 2 only, as published by the Free Software Foundation. * However, the following notice accompanied the original version of this * file: * * Copyright (c) 2007-2012, Stephen Colebourne & Michael Nascimento Santos * * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * * Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * * Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * * Neither the name of JSR-310 nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ package java.time; import static java.time.temporal.ChronoField.HOUR_OF_DAY; import static java.time.temporal.ChronoField.MICRO_OF_DAY; import static java.time.temporal.ChronoField.MINUTE_OF_HOUR; import static java.time.temporal.ChronoField.NANO_OF_DAY; import static java.time.temporal.ChronoField.NANO_OF_SECOND; import static java.time.temporal.ChronoField.SECOND_OF_DAY; import static java.time.temporal.ChronoField.SECOND_OF_MINUTE; import static java.time.temporal.ChronoUnit.NANOS; import java.io.DataInput; import java.io.DataOutput; import java.io.IOException; import java.io.InvalidObjectException; import java.io.InvalidObjectException; import java.io.Serializable; import java.time.format.DateTimeFormatter; import java.time.format.DateTimeParseException; import java.time.temporal.ChronoField; import java.time.temporal.ChronoUnit; import java.time.temporal.Temporal; import java.time.temporal.TemporalAccessor; import java.time.temporal.TemporalAdjuster; import java.time.temporal.TemporalAmount; import java.time.temporal.TemporalField; import java.time.temporal.TemporalQuery; import java.time.temporal.TemporalUnit; import java.time.temporal.UnsupportedTemporalTypeException; import java.time.temporal.ValueRange; import java.util.Objects; /** * A time without time-zone in the ISO-8601 calendar system, * such as {@code 10:15:30}. *

* {@code LocalTime} is an immutable date-time object that represents a time, * often viewed as hour-minute-second. * Time is represented to nanosecond precision. * For example, the value "13:45.30.123456789" can be stored in a {@code LocalTime}. *

* It does not store or represent a date or time-zone. * Instead, it is a description of the local time as seen on a wall clock. * It cannot represent an instant on the time-line without additional information * such as an offset or time-zone. *

* The ISO-8601 calendar system is the modern civil calendar system used today * in most of the world. This API assumes that all calendar systems use the same * representation, this class, for time-of-day. * * @implSpec * This class is immutable and thread-safe. * * @since 1.8 */ public final class LocalTime implements Temporal, TemporalAdjuster, Comparable, Serializable { /** * The minimum supported {@code LocalTime}, '00:00'. * This is the time of midnight at the start of the day. */ public static final LocalTime MIN; /** * The maximum supported {@code LocalTime}, '23:59:59.999999999'. * This is the time just before midnight at the end of the day. */ public static final LocalTime MAX; /** * The time of midnight at the start of the day, '00:00'. */ public static final LocalTime MIDNIGHT; /** * The time of noon in the middle of the day, '12:00'. */ public static final LocalTime NOON; /** * Constants for the local time of each hour. */ private static final LocalTime[] HOURS = new LocalTime[24]; static { for (int i = 0; i < HOURS.length; i++) { HOURS[i] = new LocalTime(i, 0, 0, 0); } MIDNIGHT = HOURS[0]; NOON = HOURS[12]; MIN = HOURS[0]; MAX = new LocalTime(23, 59, 59, 999_999_999); } /** * Hours per day. */ static final int HOURS_PER_DAY = 24; /** * Minutes per hour. */ static final int MINUTES_PER_HOUR = 60; /** * Minutes per day. */ static final int MINUTES_PER_DAY = MINUTES_PER_HOUR * HOURS_PER_DAY; /** * Seconds per minute. */ static final int SECONDS_PER_MINUTE = 60; /** * Seconds per hour. */ static final int SECONDS_PER_HOUR = SECONDS_PER_MINUTE * MINUTES_PER_HOUR; /** * Seconds per day. */ static final int SECONDS_PER_DAY = SECONDS_PER_HOUR * HOURS_PER_DAY; /** * Milliseconds per day. */ static final long MILLIS_PER_DAY = SECONDS_PER_DAY * 1000L; /** * Microseconds per day. */ static final long MICROS_PER_DAY = SECONDS_PER_DAY * 1000_000L; /** * Nanos per second. */ static final long NANOS_PER_SECOND = 1000_000_000L; /** * Nanos per minute. */ static final long NANOS_PER_MINUTE = NANOS_PER_SECOND * SECONDS_PER_MINUTE; /** * Nanos per hour. */ static final long NANOS_PER_HOUR = NANOS_PER_MINUTE * MINUTES_PER_HOUR; /** * Nanos per day. */ static final long NANOS_PER_DAY = NANOS_PER_HOUR * HOURS_PER_DAY; /** * Serialization version. */ private static final long serialVersionUID = 6414437269572265201L; /** * The hour. */ private final byte hour; /** * The minute. */ private final byte minute; /** * The second. */ private final byte second; /** * The nanosecond. */ private final int nano; //----------------------------------------------------------------------- /** * Obtains the current time from the system clock in the default time-zone. *

* This will query the {@link Clock#systemDefaultZone() system clock} in the default * time-zone to obtain the current time. *

* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @return the current time using the system clock and default time-zone, not null */ public static LocalTime now() { return now(Clock.systemDefaultZone()); } /** * Obtains the current time from the system clock in the specified time-zone. *

* This will query the {@link Clock#system(ZoneId) system clock} to obtain the current time. * Specifying the time-zone avoids dependence on the default time-zone. *

* Using this method will prevent the ability to use an alternate clock for testing * because the clock is hard-coded. * * @param zone the zone ID to use, not null * @return the current time using the system clock, not null */ public static LocalTime now(ZoneId zone) { return now(Clock.system(zone)); } /** * Obtains the current time from the specified clock. *

* This will query the specified clock to obtain the current time. * Using this method allows the use of an alternate clock for testing. * The alternate clock may be introduced using {@link Clock dependency injection}. * * @param clock the clock to use, not null * @return the current time, not null */ public static LocalTime now(Clock clock) { Objects.requireNonNull(clock, "clock"); // inline OffsetTime factory to avoid creating object and InstantProvider checks final Instant now = clock.instant(); // called once ZoneOffset offset = clock.getZone().getRules().getOffset(now); long localSecond = now.getEpochSecond() + offset.getTotalSeconds(); // overflow caught later int secsOfDay = (int) Math.floorMod(localSecond, SECONDS_PER_DAY); return ofNanoOfDay(secsOfDay * NANOS_PER_SECOND + now.getNano()); } //------------------------get----------------------------------------------- /** * Obtains an instance of {@code LocalTime} from an hour and minute. *

* This returns a {@code LocalTime} with the specified hour and minute. * The second and nanosecond fields will be set to zero. * * @param hour the hour-of-day to represent, from 0 to 23 * @param minute the minute-of-hour to represent, from 0 to 59 * @return the local time, not null * @throws DateTimeException if the value of any field is out of range */ public static LocalTime of(int hour, int minute) { HOUR_OF_DAY.checkValidValue(hour); if (minute == 0) { return HOURS[hour]; // for performance } MINUTE_OF_HOUR.checkValidValue(minute); return new LocalTime(hour, minute, 0, 0); } /** * Obtains an instance of {@code LocalTime} from an hour, minute and second. *

* This returns a {@code LocalTime} with the specified hour, minute and second. * The nanosecond field will be set to zero. * * @param hour the hour-of-day to represent, from 0 to 23 * @param minute the minute-of-hour to represent, from 0 to 59 * @param second the second-of-minute to represent, from 0 to 59 * @return the local time, not null * @throws DateTimeException if the value of any field is out of range */ public static LocalTime of(int hour, int minute, int second) { HOUR_OF_DAY.checkValidValue(hour); if ((minute | second) == 0) { return HOURS[hour]; // for performance } MINUTE_OF_HOUR.checkValidValue(minute); SECOND_OF_MINUTE.checkValidValue(second); return new LocalTime(hour, minute, second, 0); } /** * Obtains an instance of {@code LocalTime} from an hour, minute, second and nanosecond. *

* This returns a {@code LocalTime} with the specified hour, minute, second and nanosecond. * * @param hour the hour-of-day to represent, from 0 to 23 * @param minute the minute-of-hour to represent, from 0 to 59 * @param second the second-of-minute to represent, from 0 to 59 * @param nanoOfSecond the nano-of-second to represent, from 0 to 999,999,999 * @return the local time, not null * @throws DateTimeException if the value of any field is out of range */ public static LocalTime of(int hour, int minute, int second, int nanoOfSecond) { HOUR_OF_DAY.checkValidValue(hour); MINUTE_OF_HOUR.checkValidValue(minute); SECOND_OF_MINUTE.checkValidValue(second); NANO_OF_SECOND.checkValidValue(nanoOfSecond); return create(hour, minute, second, nanoOfSecond); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalTime} from a second-of-day value. *

* This returns a {@code LocalTime} with the specified second-of-day. * The nanosecond field will be set to zero. * * @param secondOfDay the second-of-day, from {@code 0} to {@code 24 * 60 * 60 - 1} * @return the local time, not null * @throws DateTimeException if the second-of-day value is invalid */ public static LocalTime ofSecondOfDay(long secondOfDay) { SECOND_OF_DAY.checkValidValue(secondOfDay); int hours = (int) (secondOfDay / SECONDS_PER_HOUR); secondOfDay -= hours * SECONDS_PER_HOUR; int minutes = (int) (secondOfDay / SECONDS_PER_MINUTE); secondOfDay -= minutes * SECONDS_PER_MINUTE; return create(hours, minutes, (int) secondOfDay, 0); } /** * Obtains an instance of {@code LocalTime} from a nanos-of-day value. *

* This returns a {@code LocalTime} with the specified nanosecond-of-day. * * @param nanoOfDay the nano of day, from {@code 0} to {@code 24 * 60 * 60 * 1,000,000,000 - 1} * @return the local time, not null * @throws DateTimeException if the nanos of day value is invalid */ public static LocalTime ofNanoOfDay(long nanoOfDay) { NANO_OF_DAY.checkValidValue(nanoOfDay); int hours = (int) (nanoOfDay / NANOS_PER_HOUR); nanoOfDay -= hours * NANOS_PER_HOUR; int minutes = (int) (nanoOfDay / NANOS_PER_MINUTE); nanoOfDay -= minutes * NANOS_PER_MINUTE; int seconds = (int) (nanoOfDay / NANOS_PER_SECOND); nanoOfDay -= seconds * NANOS_PER_SECOND; return create(hours, minutes, seconds, (int) nanoOfDay); } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalTime} from a temporal object. *

* This obtains a local time based on the specified temporal. * A {@code TemporalAccessor} represents an arbitrary set of date and time information, * which this factory converts to an instance of {@code LocalTime}. *

* The conversion uses the {@link TemporalQuery#localTime()} query, which relies * on extracting the {@link ChronoField#NANO_OF_DAY NANO_OF_DAY} field. *

* This method matches the signature of the functional interface {@link TemporalQuery} * allowing it to be used in queries via method reference, {@code LocalTime::from}. * * @param temporal the temporal object to convert, not null * @return the local time, not null * @throws DateTimeException if unable to convert to a {@code LocalTime} */ public static LocalTime from(TemporalAccessor temporal) { Objects.requireNonNull(temporal, "temporal"); LocalTime time = temporal.query(TemporalQuery.localTime()); if (time == null) { throw new DateTimeException("Unable to obtain LocalTime from TemporalAccessor: " + temporal.getClass()); } return time; } //----------------------------------------------------------------------- /** * Obtains an instance of {@code LocalTime} from a text string such as {@code 10:15}. *

* The string must represent a valid time and is parsed using * {@link java.time.format.DateTimeFormatter#ISO_LOCAL_TIME}. * * @param text the text to parse such as "10:15:30", not null * @return the parsed local time, not null * @throws DateTimeParseException if the text cannot be parsed */ public static LocalTime parse(CharSequence text) { return parse(text, DateTimeFormatter.ISO_LOCAL_TIME); } /** * Obtains an instance of {@code LocalTime} from a text string using a specific formatter. *

* The text is parsed using the formatter, returning a time. * * @param text the text to parse, not null * @param formatter the formatter to use, not null * @return the parsed local time, not null * @throws DateTimeParseException if the text cannot be parsed */ public static LocalTime parse(CharSequence text, DateTimeFormatter formatter) { Objects.requireNonNull(formatter, "formatter"); return formatter.parse(text, LocalTime::from); } //----------------------------------------------------------------------- /** * Creates a local time from the hour, minute, second and nanosecond fields. *

* This factory may return a cached value, but applications must not rely on this. * * @param hour the hour-of-day to represent, validated from 0 to 23 * @param minute the minute-of-hour to represent, validated from 0 to 59 * @param second the second-of-minute to represent, validated from 0 to 59 * @param nanoOfSecond the nano-of-second to represent, validated from 0 to 999,999,999 * @return the local time, not null */ private static LocalTime create(int hour, int minute, int second, int nanoOfSecond) { if ((minute | second | nanoOfSecond) == 0) { return HOURS[hour]; } return new LocalTime(hour, minute, second, nanoOfSecond); } /** * Constructor, previously validated. * * @param hour the hour-of-day to represent, validated from 0 to 23 * @param minute the minute-of-hour to represent, validated from 0 to 59 * @param second the second-of-minute to represent, validated from 0 to 59 * @param nanoOfSecond the nano-of-second to represent, validated from 0 to 999,999,999 */ private LocalTime(int hour, int minute, int second, int nanoOfSecond) { this.hour = (byte) hour; this.minute = (byte) minute; this.second = (byte) second; this.nano = nanoOfSecond; } //----------------------------------------------------------------------- /** * Checks if the specified field is supported. *

* This checks if this time can be queried for the specified field. * If false, then calling the {@link #range(TemporalField) range}, * {@link #get(TemporalField) get} and {@link #with(TemporalField, long)} * methods will throw an exception. *

* If the field is a {@link ChronoField} then the query is implemented here. * The supported fields are: *

* All other {@code ChronoField} instances will return false. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.isSupportedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the field is supported is determined by the field. * * @param field the field to check, null returns false * @return true if the field is supported on this time, false if not */ @Override public boolean isSupported(TemporalField field) { if (field instanceof ChronoField) { return field.isTimeBased(); } return field != null && field.isSupportedBy(this); } /** * Checks if the specified unit is supported. *

* This checks if the specified unit can be added to, or subtracted from, this date-time. * If false, then calling the {@link #plus(long, TemporalUnit)} and * {@link #minus(long, TemporalUnit) minus} methods will throw an exception. *

* If the unit is a {@link ChronoUnit} then the query is implemented here. * The supported units are: *

* All other {@code ChronoUnit} instances will return false. *

* If the unit is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.isSupportedBy(Temporal)} * passing {@code this} as the argument. * Whether the unit is supported is determined by the unit. * * @param unit the unit to check, null returns false * @return true if the unit can be added/subtracted, false if not */ @Override // override for Javadoc public boolean isSupported(TemporalUnit unit) { if (unit instanceof ChronoUnit) { return unit.isTimeBased(); } return unit != null && unit.isSupportedBy(this); } //----------------------------------------------------------------------- /** * Gets the range of valid values for the specified field. *

* The range object expresses the minimum and maximum valid values for a field. * This time is used to enhance the accuracy of the returned range. * If it is not possible to return the range, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return * appropriate range instances. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.rangeRefinedBy(TemporalAccessor)} * passing {@code this} as the argument. * Whether the range can be obtained is determined by the field. * * @param field the field to query the range for, not null * @return the range of valid values for the field, not null * @throws DateTimeException if the range for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported */ @Override // override for Javadoc public ValueRange range(TemporalField field) { return Temporal.super.range(field); } /** * Gets the value of the specified field from this time as an {@code int}. *

* This queries this time for the value for the specified field. * The returned value will always be within the valid range of values for the field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this time, except {@code NANO_OF_DAY} and {@code MICRO_OF_DAY} * which are too large to fit in an {@code int} and throw a {@code DateTimeException}. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained or * the value is outside the range of valid values for the field * @throws UnsupportedTemporalTypeException if the field is not supported or * the range of values exceeds an {@code int} * @throws ArithmeticException if numeric overflow occurs */ @Override // override for Javadoc and performance public int get(TemporalField field) { if (field instanceof ChronoField) { return get0(field); } return Temporal.super.get(field); } /** * Gets the value of the specified field from this time as a {@code long}. *

* This queries this time for the value for the specified field. * If it is not possible to return the value, because the field is not supported * or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the query is implemented here. * The {@link #isSupported(TemporalField) supported fields} will return valid * values based on this time. * All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.getFrom(TemporalAccessor)} * passing {@code this} as the argument. Whether the value can be obtained, * and what the value represents, is determined by the field. * * @param field the field to get, not null * @return the value for the field * @throws DateTimeException if a value for the field cannot be obtained * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public long getLong(TemporalField field) { if (field instanceof ChronoField) { if (field == NANO_OF_DAY) { return toNanoOfDay(); } if (field == MICRO_OF_DAY) { return toNanoOfDay() / 1000; } return get0(field); } return field.getFrom(this); } private int get0(TemporalField field) { switch ((ChronoField) field) { case NANO_OF_SECOND: return nano; case NANO_OF_DAY: throw new UnsupportedTemporalTypeException("Invalid field 'NanoOfDay' for get() method, use getLong() instead"); case MICRO_OF_SECOND: return nano / 1000; case MICRO_OF_DAY: throw new UnsupportedTemporalTypeException("Invalid field 'MicroOfDay' for get() method, use getLong() instead"); case MILLI_OF_SECOND: return nano / 1000_000; case MILLI_OF_DAY: return (int) (toNanoOfDay() / 1000_000); case SECOND_OF_MINUTE: return second; case SECOND_OF_DAY: return toSecondOfDay(); case MINUTE_OF_HOUR: return minute; case MINUTE_OF_DAY: return hour * 60 + minute; case HOUR_OF_AMPM: return hour % 12; case CLOCK_HOUR_OF_AMPM: int ham = hour % 12; return (ham % 12 == 0 ? 12 : ham); case HOUR_OF_DAY: return hour; case CLOCK_HOUR_OF_DAY: return (hour == 0 ? 24 : hour); case AMPM_OF_DAY: return hour / 12; } throw new UnsupportedTemporalTypeException("Unsupported field: " + field); } //----------------------------------------------------------------------- /** * Gets the hour-of-day field. * * @return the hour-of-day, from 0 to 23 */ public int getHour() { return hour; } /** * Gets the minute-of-hour field. * * @return the minute-of-hour, from 0 to 59 */ public int getMinute() { return minute; } /** * Gets the second-of-minute field. * * @return the second-of-minute, from 0 to 59 */ public int getSecond() { return second; } /** * Gets the nano-of-second field. * * @return the nano-of-second, from 0 to 999,999,999 */ public int getNano() { return nano; } //----------------------------------------------------------------------- /** * Returns an adjusted copy of this time. *

* This returns a {@code LocalTime}, based on this one, with the time adjusted. * The adjustment takes place using the specified adjuster strategy object. * Read the documentation of the adjuster to understand what adjustment will be made. *

* A simple adjuster might simply set the one of the fields, such as the hour field. * A more complex adjuster might set the time to the last hour of the day. *

* The result of this method is obtained by invoking the * {@link TemporalAdjuster#adjustInto(Temporal)} method on the * specified adjuster passing {@code this} as the argument. *

* This instance is immutable and unaffected by this method call. * * @param adjuster the adjuster to use, not null * @return a {@code LocalTime} based on {@code this} with the adjustment made, not null * @throws DateTimeException if the adjustment cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime with(TemporalAdjuster adjuster) { // optimizations if (adjuster instanceof LocalTime) { return (LocalTime) adjuster; } return (LocalTime) adjuster.adjustInto(this); } /** * Returns a copy of this time with the specified field set to a new value. *

* This returns a {@code LocalTime}, based on this one, with the value * for the specified field changed. * This can be used to change any supported field, such as the hour, minute or second. * If it is not possible to set the value, because the field is not supported or for * some other reason, an exception is thrown. *

* If the field is a {@link ChronoField} then the adjustment is implemented here. * The supported fields behave as follows: *

*

* In all cases, if the new value is outside the valid range of values for the field * then a {@code DateTimeException} will be thrown. *

* All other {@code ChronoField} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoField}, then the result of this method * is obtained by invoking {@code TemporalField.adjustInto(Temporal, long)} * passing {@code this} as the argument. In this case, the field determines * whether and how to adjust the instant. *

* This instance is immutable and unaffected by this method call. * * @param field the field to set in the result, not null * @param newValue the new value of the field in the result * @return a {@code LocalTime} based on {@code this} with the specified field set, not null * @throws DateTimeException if the field cannot be set * @throws UnsupportedTemporalTypeException if the field is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime with(TemporalField field, long newValue) { if (field instanceof ChronoField) { ChronoField f = (ChronoField) field; f.checkValidValue(newValue); switch (f) { case NANO_OF_SECOND: return withNano((int) newValue); case NANO_OF_DAY: return LocalTime.ofNanoOfDay(newValue); case MICRO_OF_SECOND: return withNano((int) newValue * 1000); case MICRO_OF_DAY: return plusNanos((newValue - toNanoOfDay() / 1000) * 1000); case MILLI_OF_SECOND: return withNano((int) newValue * 1000_000); case MILLI_OF_DAY: return plusNanos((newValue - toNanoOfDay() / 1000_000) * 1000_000); case SECOND_OF_MINUTE: return withSecond((int) newValue); case SECOND_OF_DAY: return plusSeconds(newValue - toSecondOfDay()); case MINUTE_OF_HOUR: return withMinute((int) newValue); case MINUTE_OF_DAY: return plusMinutes(newValue - (hour * 60 + minute)); case HOUR_OF_AMPM: return plusHours(newValue - (hour % 12)); case CLOCK_HOUR_OF_AMPM: return plusHours((newValue == 12 ? 0 : newValue) - (hour % 12)); case HOUR_OF_DAY: return withHour((int) newValue); case CLOCK_HOUR_OF_DAY: return withHour((int) (newValue == 24 ? 0 : newValue)); case AMPM_OF_DAY: return plusHours((newValue - (hour / 12)) * 12); } throw new UnsupportedTemporalTypeException("Unsupported field: " + field); } return field.adjustInto(this, newValue); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalTime} with the hour-of-day value altered. *

* This instance is immutable and unaffected by this method call. * * @param hour the hour-of-day to set in the result, from 0 to 23 * @return a {@code LocalTime} based on this time with the requested hour, not null * @throws DateTimeException if the hour value is invalid */ public LocalTime withHour(int hour) { if (this.hour == hour) { return this; } HOUR_OF_DAY.checkValidValue(hour); return create(hour, minute, second, nano); } /** * Returns a copy of this {@code LocalTime} with the minute-of-hour value altered. *

* This instance is immutable and unaffected by this method call. * * @param minute the minute-of-hour to set in the result, from 0 to 59 * @return a {@code LocalTime} based on this time with the requested minute, not null * @throws DateTimeException if the minute value is invalid */ public LocalTime withMinute(int minute) { if (this.minute == minute) { return this; } MINUTE_OF_HOUR.checkValidValue(minute); return create(hour, minute, second, nano); } /** * Returns a copy of this {@code LocalTime} with the second-of-minute value altered. *

* This instance is immutable and unaffected by this method call. * * @param second the second-of-minute to set in the result, from 0 to 59 * @return a {@code LocalTime} based on this time with the requested second, not null * @throws DateTimeException if the second value is invalid */ public LocalTime withSecond(int second) { if (this.second == second) { return this; } SECOND_OF_MINUTE.checkValidValue(second); return create(hour, minute, second, nano); } /** * Returns a copy of this {@code LocalTime} with the nano-of-second value altered. *

* This instance is immutable and unaffected by this method call. * * @param nanoOfSecond the nano-of-second to set in the result, from 0 to 999,999,999 * @return a {@code LocalTime} based on this time with the requested nanosecond, not null * @throws DateTimeException if the nanos value is invalid */ public LocalTime withNano(int nanoOfSecond) { if (this.nano == nanoOfSecond) { return this; } NANO_OF_SECOND.checkValidValue(nanoOfSecond); return create(hour, minute, second, nanoOfSecond); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalTime} with the time truncated. *

* Truncating the time returns a copy of the original time with fields * smaller than the specified unit set to zero. * For example, truncating with the {@link ChronoUnit#MINUTES minutes} unit * will set the second-of-minute and nano-of-second field to zero. *

* The unit must have a {@linkplain TemporalUnit#getDuration() duration} * that divides into the length of a standard day without remainder. * This includes all supplied time units on {@link ChronoUnit} and * {@link ChronoUnit#DAYS DAYS}. Other units throw an exception. *

* This instance is immutable and unaffected by this method call. * * @param unit the unit to truncate to, not null * @return a {@code LocalTime} based on this time with the time truncated, not null * @throws DateTimeException if unable to truncate * @throws UnsupportedTemporalTypeException if the unit is not supported */ public LocalTime truncatedTo(TemporalUnit unit) { if (unit == ChronoUnit.NANOS) { return this; } Duration unitDur = unit.getDuration(); if (unitDur.getSeconds() > SECONDS_PER_DAY) { throw new UnsupportedTemporalTypeException("Unit is too large to be used for truncation"); } long dur = unitDur.toNanos(); if ((NANOS_PER_DAY % dur) != 0) { throw new UnsupportedTemporalTypeException("Unit must divide into a standard day without remainder"); } long nod = toNanoOfDay(); return ofNanoOfDay((nod / dur) * dur); } //----------------------------------------------------------------------- /** * Returns a copy of this time with the specified amount added. *

* This returns a {@code LocalTime}, based on this one, with the specified amount added. * The amount is typically {@link Duration} but may be any other type implementing * the {@link TemporalAmount} interface. *

* The calculation is delegated to the amount object by calling * {@link TemporalAmount#addTo(Temporal)}. The amount implementation is free * to implement the addition in any way it wishes, however it typically * calls back to {@link #plus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully added. *

* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount to add, not null * @return a {@code LocalTime} based on this time with the addition made, not null * @throws DateTimeException if the addition cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime plus(TemporalAmount amountToAdd) { return (LocalTime) amountToAdd.addTo(this); } /** * Returns a copy of this time with the specified amount added. *

* This returns a {@code LocalTime}, based on this one, with the amount * in terms of the unit added. If it is not possible to add the amount, because the * unit is not supported or for some other reason, an exception is thrown. *

* If the field is a {@link ChronoUnit} then the addition is implemented here. * The supported fields behave as follows: *

*

* All other {@code ChronoUnit} instances will throw an {@code UnsupportedTemporalTypeException}. *

* If the field is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.addTo(Temporal, long)} * passing {@code this} as the argument. In this case, the unit determines * whether and how to perform the addition. *

* This instance is immutable and unaffected by this method call. * * @param amountToAdd the amount of the unit to add to the result, may be negative * @param unit the unit of the amount to add, not null * @return a {@code LocalTime} based on this time with the specified amount added, not null * @throws DateTimeException if the addition cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime plus(long amountToAdd, TemporalUnit unit) { if (unit instanceof ChronoUnit) { switch ((ChronoUnit) unit) { case NANOS: return plusNanos(amountToAdd); case MICROS: return plusNanos((amountToAdd % MICROS_PER_DAY) * 1000); case MILLIS: return plusNanos((amountToAdd % MILLIS_PER_DAY) * 1000_000); case SECONDS: return plusSeconds(amountToAdd); case MINUTES: return plusMinutes(amountToAdd); case HOURS: return plusHours(amountToAdd); case HALF_DAYS: return plusHours((amountToAdd % 2) * 12); } throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); } return unit.addTo(this, amountToAdd); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalTime} with the specified period in hours added. *

* This adds the specified number of hours to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param hoursToAdd the hours to add, may be negative * @return a {@code LocalTime} based on this time with the hours added, not null */ public LocalTime plusHours(long hoursToAdd) { if (hoursToAdd == 0) { return this; } int newHour = ((int) (hoursToAdd % HOURS_PER_DAY) + hour + HOURS_PER_DAY) % HOURS_PER_DAY; return create(newHour, minute, second, nano); } /** * Returns a copy of this {@code LocalTime} with the specified period in minutes added. *

* This adds the specified number of minutes to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param minutesToAdd the minutes to add, may be negative * @return a {@code LocalTime} based on this time with the minutes added, not null */ public LocalTime plusMinutes(long minutesToAdd) { if (minutesToAdd == 0) { return this; } int mofd = hour * MINUTES_PER_HOUR + minute; int newMofd = ((int) (minutesToAdd % MINUTES_PER_DAY) + mofd + MINUTES_PER_DAY) % MINUTES_PER_DAY; if (mofd == newMofd) { return this; } int newHour = newMofd / MINUTES_PER_HOUR; int newMinute = newMofd % MINUTES_PER_HOUR; return create(newHour, newMinute, second, nano); } /** * Returns a copy of this {@code LocalTime} with the specified period in seconds added. *

* This adds the specified number of seconds to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param secondstoAdd the seconds to add, may be negative * @return a {@code LocalTime} based on this time with the seconds added, not null */ public LocalTime plusSeconds(long secondstoAdd) { if (secondstoAdd == 0) { return this; } int sofd = hour * SECONDS_PER_HOUR + minute * SECONDS_PER_MINUTE + second; int newSofd = ((int) (secondstoAdd % SECONDS_PER_DAY) + sofd + SECONDS_PER_DAY) % SECONDS_PER_DAY; if (sofd == newSofd) { return this; } int newHour = newSofd / SECONDS_PER_HOUR; int newMinute = (newSofd / SECONDS_PER_MINUTE) % MINUTES_PER_HOUR; int newSecond = newSofd % SECONDS_PER_MINUTE; return create(newHour, newMinute, newSecond, nano); } /** * Returns a copy of this {@code LocalTime} with the specified period in nanoseconds added. *

* This adds the specified number of nanoseconds to this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param nanosToAdd the nanos to add, may be negative * @return a {@code LocalTime} based on this time with the nanoseconds added, not null */ public LocalTime plusNanos(long nanosToAdd) { if (nanosToAdd == 0) { return this; } long nofd = toNanoOfDay(); long newNofd = ((nanosToAdd % NANOS_PER_DAY) + nofd + NANOS_PER_DAY) % NANOS_PER_DAY; if (nofd == newNofd) { return this; } int newHour = (int) (newNofd / NANOS_PER_HOUR); int newMinute = (int) ((newNofd / NANOS_PER_MINUTE) % MINUTES_PER_HOUR); int newSecond = (int) ((newNofd / NANOS_PER_SECOND) % SECONDS_PER_MINUTE); int newNano = (int) (newNofd % NANOS_PER_SECOND); return create(newHour, newMinute, newSecond, newNano); } //----------------------------------------------------------------------- /** * Returns a copy of this time with the specified amount subtracted. *

* This returns a {@code LocalTime}, based on this one, with the specified amount subtracted. * The amount is typically {@link Duration} but may be any other type implementing * the {@link TemporalAmount} interface. *

* The calculation is delegated to the amount object by calling * {@link TemporalAmount#subtractFrom(Temporal)}. The amount implementation is free * to implement the subtraction in any way it wishes, however it typically * calls back to {@link #minus(long, TemporalUnit)}. Consult the documentation * of the amount implementation to determine if it can be successfully subtracted. *

* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount to subtract, not null * @return a {@code LocalTime} based on this time with the subtraction made, not null * @throws DateTimeException if the subtraction cannot be made * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime minus(TemporalAmount amountToSubtract) { return (LocalTime) amountToSubtract.subtractFrom(this); } /** * Returns a copy of this time with the specified amount subtracted. *

* This returns a {@code LocalTime}, based on this one, with the amount * in terms of the unit subtracted. If it is not possible to subtract the amount, * because the unit is not supported or for some other reason, an exception is thrown. *

* This method is equivalent to {@link #plus(long, TemporalUnit)} with the amount negated. * See that method for a full description of how addition, and thus subtraction, works. *

* This instance is immutable and unaffected by this method call. * * @param amountToSubtract the amount of the unit to subtract from the result, may be negative * @param unit the unit of the amount to subtract, not null * @return a {@code LocalTime} based on this time with the specified amount subtracted, not null * @throws DateTimeException if the subtraction cannot be made * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public LocalTime minus(long amountToSubtract, TemporalUnit unit) { return (amountToSubtract == Long.MIN_VALUE ? plus(Long.MAX_VALUE, unit).plus(1, unit) : plus(-amountToSubtract, unit)); } //----------------------------------------------------------------------- /** * Returns a copy of this {@code LocalTime} with the specified period in hours subtracted. *

* This subtracts the specified number of hours from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param hoursToSubtract the hours to subtract, may be negative * @return a {@code LocalTime} based on this time with the hours subtracted, not null */ public LocalTime minusHours(long hoursToSubtract) { return plusHours(-(hoursToSubtract % HOURS_PER_DAY)); } /** * Returns a copy of this {@code LocalTime} with the specified period in minutes subtracted. *

* This subtracts the specified number of minutes from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param minutesToSubtract the minutes to subtract, may be negative * @return a {@code LocalTime} based on this time with the minutes subtracted, not null */ public LocalTime minusMinutes(long minutesToSubtract) { return plusMinutes(-(minutesToSubtract % MINUTES_PER_DAY)); } /** * Returns a copy of this {@code LocalTime} with the specified period in seconds subtracted. *

* This subtracts the specified number of seconds from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param secondsToSubtract the seconds to subtract, may be negative * @return a {@code LocalTime} based on this time with the seconds subtracted, not null */ public LocalTime minusSeconds(long secondsToSubtract) { return plusSeconds(-(secondsToSubtract % SECONDS_PER_DAY)); } /** * Returns a copy of this {@code LocalTime} with the specified period in nanoseconds subtracted. *

* This subtracts the specified number of nanoseconds from this time, returning a new time. * The calculation wraps around midnight. *

* This instance is immutable and unaffected by this method call. * * @param nanosToSubtract the nanos to subtract, may be negative * @return a {@code LocalTime} based on this time with the nanoseconds subtracted, not null */ public LocalTime minusNanos(long nanosToSubtract) { return plusNanos(-(nanosToSubtract % NANOS_PER_DAY)); } //----------------------------------------------------------------------- /** * Queries this time using the specified query. *

* This queries this time using the specified query strategy object. * The {@code TemporalQuery} object defines the logic to be used to * obtain the result. Read the documentation of the query to understand * what the result of this method will be. *

* The result of this method is obtained by invoking the * {@link TemporalQuery#queryFrom(TemporalAccessor)} method on the * specified query passing {@code this} as the argument. * * @param the type of the result * @param query the query to invoke, not null * @return the query result, null may be returned (defined by the query) * @throws DateTimeException if unable to query (defined by the query) * @throws ArithmeticException if numeric overflow occurs (defined by the query) */ @SuppressWarnings("unchecked") @Override public R query(TemporalQuery query) { if (query == TemporalQuery.chronology() || query == TemporalQuery.zoneId() || query == TemporalQuery.zone() || query == TemporalQuery.offset()) { return null; } else if (query == TemporalQuery.localTime()) { return (R) this; } else if (query == TemporalQuery.localDate()) { return null; } else if (query == TemporalQuery.precision()) { return (R) NANOS; } // inline TemporalAccessor.super.query(query) as an optimization // non-JDK classes are not permitted to make this optimization return query.queryFrom(this); } /** * Adjusts the specified temporal object to have the same time as this object. *

* This returns a temporal object of the same observable type as the input * with the time changed to be the same as this. *

* The adjustment is equivalent to using {@link Temporal#with(TemporalField, long)} * passing {@link ChronoField#NANO_OF_DAY} as the field. *

* In most cases, it is clearer to reverse the calling pattern by using * {@link Temporal#with(TemporalAdjuster)}: *

     *   // these two lines are equivalent, but the second approach is recommended
     *   temporal = thisLocalTime.adjustInto(temporal);
     *   temporal = temporal.with(thisLocalTime);
     * 
*

* This instance is immutable and unaffected by this method call. * * @param temporal the target object to be adjusted, not null * @return the adjusted object, not null * @throws DateTimeException if unable to make the adjustment * @throws ArithmeticException if numeric overflow occurs */ @Override public Temporal adjustInto(Temporal temporal) { return temporal.with(NANO_OF_DAY, toNanoOfDay()); } /** * Calculates the amount of time until another time in terms of the specified unit. *

* This calculates the amount of time between two {@code LocalTime} * objects in terms of a single {@code TemporalUnit}. * The start and end points are {@code this} and the specified time. * The result will be negative if the end is before the start. * The {@code Temporal} passed to this method is converted to a * {@code LocalTime} using {@link #from(TemporalAccessor)}. * For example, the amount in hours between two times can be calculated * using {@code startTime.until(endTime, HOURS)}. *

* The calculation returns a whole number, representing the number of * complete units between the two times. * For example, the amount in hours between 11:30 and 13:29 will only * be one hour as it is one minute short of two hours. *

* There are two equivalent ways of using this method. * The first is to invoke this method. * The second is to use {@link TemporalUnit#between(Temporal, Temporal)}: *

     *   // these two lines are equivalent
     *   amount = start.until(end, MINUTES);
     *   amount = MINUTES.between(start, end);
     * 
* The choice should be made based on which makes the code more readable. *

* The calculation is implemented in this method for {@link ChronoUnit}. * The units {@code NANOS}, {@code MICROS}, {@code MILLIS}, {@code SECONDS}, * {@code MINUTES}, {@code HOURS} and {@code HALF_DAYS} are supported. * Other {@code ChronoUnit} values will throw an exception. *

* If the unit is not a {@code ChronoUnit}, then the result of this method * is obtained by invoking {@code TemporalUnit.between(Temporal, Temporal)} * passing {@code this} as the first argument and the converted input temporal * as the second argument. *

* This instance is immutable and unaffected by this method call. * * @param endExclusive the end time, exclusive, which is converted to a {@code LocalTime}, not null * @param unit the unit to measure the amount in, not null * @return the amount of time between this time and the end time * @throws DateTimeException if the amount cannot be calculated, or the end * temporal cannot be converted to a {@code LocalTime} * @throws UnsupportedTemporalTypeException if the unit is not supported * @throws ArithmeticException if numeric overflow occurs */ @Override public long until(Temporal endExclusive, TemporalUnit unit) { LocalTime end = LocalTime.from(endExclusive); if (unit instanceof ChronoUnit) { long nanosUntil = end.toNanoOfDay() - toNanoOfDay(); // no overflow switch ((ChronoUnit) unit) { case NANOS: return nanosUntil; case MICROS: return nanosUntil / 1000; case MILLIS: return nanosUntil / 1000_000; case SECONDS: return nanosUntil / NANOS_PER_SECOND; case MINUTES: return nanosUntil / NANOS_PER_MINUTE; case HOURS: return nanosUntil / NANOS_PER_HOUR; case HALF_DAYS: return nanosUntil / (12 * NANOS_PER_HOUR); } throw new UnsupportedTemporalTypeException("Unsupported unit: " + unit); } return unit.between(this, end); } /** * Formats this time using the specified formatter. *

* This time will be passed to the formatter to produce a string. * * @param formatter the formatter to use, not null * @return the formatted time string, not null * @throws DateTimeException if an error occurs during printing */ public String format(DateTimeFormatter formatter) { Objects.requireNonNull(formatter, "formatter"); return formatter.format(this); } //----------------------------------------------------------------------- /** * Combines this time with a date to create a {@code LocalDateTime}. *

* This returns a {@code LocalDateTime} formed from this time at the specified date. * All possible combinations of date and time are valid. * * @param date the date to combine with, not null * @return the local date-time formed from this time and the specified date, not null */ public LocalDateTime atDate(LocalDate date) { return LocalDateTime.of(date, this); } /** * Combines this time with an offset to create an {@code OffsetTime}. *

* This returns an {@code OffsetTime} formed from this time at the specified offset. * All possible combinations of time and offset are valid. * * @param offset the offset to combine with, not null * @return the offset time formed from this time and the specified offset, not null */ public OffsetTime atOffset(ZoneOffset offset) { return OffsetTime.of(this, offset); } //----------------------------------------------------------------------- /** * Extracts the time as seconds of day, * from {@code 0} to {@code 24 * 60 * 60 - 1}. * * @return the second-of-day equivalent to this time */ public int toSecondOfDay() { int total = hour * SECONDS_PER_HOUR; total += minute * SECONDS_PER_MINUTE; total += second; return total; } /** * Extracts the time as nanos of day, * from {@code 0} to {@code 24 * 60 * 60 * 1,000,000,000 - 1}. * * @return the nano of day equivalent to this time */ public long toNanoOfDay() { long total = hour * NANOS_PER_HOUR; total += minute * NANOS_PER_MINUTE; total += second * NANOS_PER_SECOND; total += nano; return total; } //----------------------------------------------------------------------- /** * Compares this {@code LocalTime} to another time. *

* The comparison is based on the time-line position of the local times within a day. * It is "consistent with equals", as defined by {@link Comparable}. * * @param other the other time to compare to, not null * @return the comparator value, negative if less, positive if greater * @throws NullPointerException if {@code other} is null */ @Override public int compareTo(LocalTime other) { int cmp = Integer.compare(hour, other.hour); if (cmp == 0) { cmp = Integer.compare(minute, other.minute); if (cmp == 0) { cmp = Integer.compare(second, other.second); if (cmp == 0) { cmp = Integer.compare(nano, other.nano); } } } return cmp; } /** * Checks if this {@code LocalTime} is after the specified time. *

* The comparison is based on the time-line position of the time within a day. * * @param other the other time to compare to, not null * @return true if this is after the specified time * @throws NullPointerException if {@code other} is null */ public boolean isAfter(LocalTime other) { return compareTo(other) > 0; } /** * Checks if this {@code LocalTime} is before the specified time. *

* The comparison is based on the time-line position of the time within a day. * * @param other the other time to compare to, not null * @return true if this point is before the specified time * @throws NullPointerException if {@code other} is null */ public boolean isBefore(LocalTime other) { return compareTo(other) < 0; } //----------------------------------------------------------------------- /** * Checks if this time is equal to another time. *

* The comparison is based on the time-line position of the time within a day. *

* Only objects of type {@code LocalTime} are compared, other types return false. * To compare the date of two {@code TemporalAccessor} instances, use * {@link ChronoField#NANO_OF_DAY} as a comparator. * * @param obj the object to check, null returns false * @return true if this is equal to the other time */ @Override public boolean equals(Object obj) { if (this == obj) { return true; } if (obj instanceof LocalTime) { LocalTime other = (LocalTime) obj; return hour == other.hour && minute == other.minute && second == other.second && nano == other.nano; } return false; } /** * A hash code for this time. * * @return a suitable hash code */ @Override public int hashCode() { long nod = toNanoOfDay(); return (int) (nod ^ (nod >>> 32)); } //----------------------------------------------------------------------- /** * Outputs this time as a {@code String}, such as {@code 10:15}. *

* The output will be one of the following ISO-8601 formats: *

* The format used will be the shortest that outputs the full value of * the time where the omitted parts are implied to be zero. * * @return a string representation of this time, not null */ @Override public String toString() { StringBuilder buf = new StringBuilder(18); int hourValue = hour; int minuteValue = minute; int secondValue = second; int nanoValue = nano; buf.append(hourValue < 10 ? "0" : "").append(hourValue) .append(minuteValue < 10 ? ":0" : ":").append(minuteValue); if (secondValue > 0 || nanoValue > 0) { buf.append(secondValue < 10 ? ":0" : ":").append(secondValue); if (nanoValue > 0) { buf.append('.'); if (nanoValue % 1000_000 == 0) { buf.append(Integer.toString((nanoValue / 1000_000) + 1000).substring(1)); } else if (nanoValue % 1000 == 0) { buf.append(Integer.toString((nanoValue / 1000) + 1000_000).substring(1)); } else { buf.append(Integer.toString((nanoValue) + 1000_000_000).substring(1)); } } } return buf.toString(); } //----------------------------------------------------------------------- /** * Writes the object using a * dedicated serialized form. * @serialData * A twos-complement value indicates the remaining values are not in the stream * and should be set to zero. *

     *  out.writeByte(4);  // identifies a LocalTime
     *  if (nano == 0) {
     *    if (second == 0) {
     *      if (minute == 0) {
     *        out.writeByte(~hour);
     *      } else {
     *        out.writeByte(hour);
     *        out.writeByte(~minute);
     *      }
     *    } else {
     *      out.writeByte(hour);
     *      out.writeByte(minute);
     *      out.writeByte(~second);
     *    }
     *  } else {
     *    out.writeByte(hour);
     *    out.writeByte(minute);
     *    out.writeByte(second);
     *    out.writeInt(nano);
     *  }
     * 
* * @return the instance of {@code Ser}, not null */ private Object writeReplace() { return new Ser(Ser.LOCAL_TIME_TYPE, this); } /** * Defend against malicious streams. * @return never * @throws InvalidObjectException always */ private Object readResolve() throws InvalidObjectException { throw new InvalidObjectException("Deserialization via serialization delegate"); } void writeExternal(DataOutput out) throws IOException { if (nano == 0) { if (second == 0) { if (minute == 0) { out.writeByte(~hour); } else { out.writeByte(hour); out.writeByte(~minute); } } else { out.writeByte(hour); out.writeByte(minute); out.writeByte(~second); } } else { out.writeByte(hour); out.writeByte(minute); out.writeByte(second); out.writeInt(nano); } } static LocalTime readExternal(DataInput in) throws IOException { int hour = in.readByte(); int minute = 0; int second = 0; int nano = 0; if (hour < 0) { hour = ~hour; } else { minute = in.readByte(); if (minute < 0) { minute = ~minute; } else { second = in.readByte(); if (second < 0) { second = ~second; } else { nano = in.readInt(); } } } return LocalTime.of(hour, minute, second, nano); } }