# # This is the "master security properties file". # # An alternate java.security properties file may be specified # from the command line via the system property # # -Djava.security.properties= # # This properties file appends to the master security properties file. # If both properties files specify values for the same key, the value # from the command-line properties file is selected, as it is the last # one loaded. # # Also, if you specify # # -Djava.security.properties== (2 equals), # # then that properties file completely overrides the master security # properties file. # # To disable the ability to specify an additional properties file from # the command line, set the key security.overridePropertiesFile # to false in the master security properties file. It is set to true # by default. # In this file, various security properties are set for use by # java.security classes. This is where users can statically register # Cryptography Package Providers ("providers" for short). The term # "provider" refers to a package or set of packages that supply a # concrete implementation of a subset of the cryptography aspects of # the Java Security API. A provider may, for example, implement one or # more digital signature algorithms or message digest algorithms. # # Each provider must implement a subclass of the Provider class. # To register a provider in this master security properties file, # specify the Provider subclass name and priority in the format # # security.provider.= # # This declares a provider, and specifies its preference # order n. The preference order is the order in which providers are # searched for requested algorithms (when no specific provider is # requested). The order is 1-based; 1 is the most preferred, followed # by 2, and so on. # # must specify the subclass of the Provider class whose # constructor sets the values of various properties that are required # for the Java Security API to look up the algorithms or other # facilities implemented by the provider. # # There must be at least one provider specification in java.security. # There is a default provider that comes standard with the JDK. It # is called the "SUN" provider, and its Provider subclass # named Sun appears in the sun.security.provider package. Thus, the # "SUN" provider is registered via the following: # # security.provider.1=sun.security.provider.Sun # # (The number 1 is used for the default provider.) # # Note: Providers can be dynamically registered instead by calls to # either the addProvider or insertProviderAt method in the Security # class. # # List of providers and their preference orders (see above): # security.provider.1=sun.security.provider.Sun security.provider.2=sun.security.rsa.SunRsaSign security.provider.3=sun.security.ec.SunEC security.provider.4=com.sun.net.ssl.internal.ssl.Provider security.provider.5=com.sun.crypto.provider.SunJCE security.provider.6=sun.security.jgss.SunProvider security.provider.7=com.sun.security.sasl.Provider security.provider.8=org.jcp.xml.dsig.internal.dom.XMLDSigRI security.provider.9=sun.security.smartcardio.SunPCSC # # Sun Provider SecureRandom seed source. # # Select the primary source of seed data for the "SHA1PRNG" and # "NativePRNG" SecureRandom implementations in the "Sun" provider. # (Other SecureRandom implementations might also use this property.) # # On Unix-like systems (for example, Solaris/Linux/MacOS), the # "NativePRNG" and "SHA1PRNG" implementations obtains seed data from # special device files such as file:/dev/random. # # On Windows systems, specifying the URLs "file:/dev/random" or # "file:/dev/urandom" will enable the native Microsoft CryptoAPI seeding # mechanism for SHA1PRNG. # # By default, an attempt is made to use the entropy gathering device # specified by the "securerandom.source" Security property. If an # exception occurs while accessing the specified URL: # # SHA1PRNG: # the traditional system/thread activity algorithm will be used. # # NativePRNG: # a default value of /dev/random will be used. If neither # are available, the implementation will be disabled. # "file" is the only currently supported protocol type. # # The entropy gathering device can also be specified with the System # property "java.security.egd". For example: # # % java -Djava.security.egd=file:/dev/random MainClass # # Specifying this System property will override the # "securerandom.source" Security property. # # In addition, if "file:/dev/random" or "file:/dev/urandom" is # specified, the "NativePRNG" implementation will be more preferred than # SHA1PRNG in the Sun provider. # securerandom.source=file:/dev/random # # A list of known strong SecureRandom implementations. # # To help guide applications in selecting a suitable strong # java.security.SecureRandom implementation, Java distributions should # indicate a list of known strong implementations using the property. # # This is a comma-separated list of algorithm and/or algorithm:provider # entries. # securerandom.strongAlgorithms=NativePRNGBlocking:SUN # # Class to instantiate as the javax.security.auth.login.Configuration # provider. # login.configuration.provider=sun.security.provider.ConfigFile # # Default login configuration file # #login.config.url.1=file:${user.home}/.java.login.config # # Class to instantiate as the system Policy. This is the name of the class # that will be used as the Policy object. # policy.provider=sun.security.provider.PolicyFile # The default is to have a single system-wide policy file, # and a policy file in the user's home directory. policy.url.1=file:${java.home}/lib/security/java.policy policy.url.2=file:${user.home}/.java.policy # whether or not we expand properties in the policy file # if this is set to false, properties (${...}) will not be expanded in policy # files. policy.expandProperties=true # whether or not we allow an extra policy to be passed on the command line # with -Djava.security.policy=somefile. Comment out this line to disable # this feature. policy.allowSystemProperty=true # whether or not we look into the IdentityScope for trusted Identities # when encountering a 1.1 signed JAR file. If the identity is found # and is trusted, we grant it AllPermission. policy.ignoreIdentityScope=false # # Default keystore type. # keystore.type=jks # # List of comma-separated packages that start with or equal this string # will cause a security exception to be thrown when # passed to checkPackageAccess unless the # corresponding RuntimePermission ("accessClassInPackage."+package) has # been granted. package.access=sun.,\ com.sun.xml.internal.,\ com.sun.imageio.,\ com.sun.istack.internal.,\ com.sun.jmx.,\ com.sun.media.sound.,\ com.sun.naming.internal.,\ com.sun.proxy.,\ com.sun.corba.se.,\ com.sun.org.apache.bcel.internal.,\ com.sun.org.apache.regexp.internal.,\ com.sun.org.apache.xerces.internal.,\ com.sun.org.apache.xpath.internal.,\ com.sun.org.apache.xalan.internal.extensions.,\ com.sun.org.apache.xalan.internal.lib.,\ com.sun.org.apache.xalan.internal.res.,\ com.sun.org.apache.xalan.internal.templates.,\ com.sun.org.apache.xalan.internal.utils.,\ com.sun.org.apache.xalan.internal.xslt.,\ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\ com.sun.org.apache.xalan.internal.xsltc.compiler.,\ com.sun.org.apache.xalan.internal.xsltc.trax.,\ com.sun.org.apache.xalan.internal.xsltc.util.,\ com.sun.org.apache.xml.internal.res.,\ com.sun.org.apache.xml.internal.security.,\ com.sun.org.apache.xml.internal.serializer.utils.,\ com.sun.org.apache.xml.internal.utils.,\ com.sun.org.glassfish.,\ com.oracle.xmlns.internal.,\ com.oracle.webservices.internal.,\ oracle.jrockit.jfr.,\ org.jcp.xml.dsig.internal.,\ jdk.internal.,\ jdk.nashorn.internal.,\ jdk.nashorn.tools.,\ com.sun.activation.registries. # # List of comma-separated packages that start with or equal this string # will cause a security exception to be thrown when # passed to checkPackageDefinition unless the # corresponding RuntimePermission ("defineClassInPackage."+package) has # been granted. # # by default, none of the class loaders supplied with the JDK call # checkPackageDefinition. # package.definition=sun.,\ com.sun.xml.internal.,\ com.sun.imageio.,\ com.sun.istack.internal.,\ com.sun.jmx.,\ com.sun.media.sound.,\ com.sun.naming.internal.,\ com.sun.proxy.,\ com.sun.corba.se.,\ com.sun.org.apache.bcel.internal.,\ com.sun.org.apache.regexp.internal.,\ com.sun.org.apache.xerces.internal.,\ com.sun.org.apache.xpath.internal.,\ com.sun.org.apache.xalan.internal.extensions.,\ com.sun.org.apache.xalan.internal.lib.,\ com.sun.org.apache.xalan.internal.res.,\ com.sun.org.apache.xalan.internal.templates.,\ com.sun.org.apache.xalan.internal.utils.,\ com.sun.org.apache.xalan.internal.xslt.,\ com.sun.org.apache.xalan.internal.xsltc.cmdline.,\ com.sun.org.apache.xalan.internal.xsltc.compiler.,\ com.sun.org.apache.xalan.internal.xsltc.trax.,\ com.sun.org.apache.xalan.internal.xsltc.util.,\ com.sun.org.apache.xml.internal.res.,\ com.sun.org.apache.xml.internal.security.,\ com.sun.org.apache.xml.internal.serializer.utils.,\ com.sun.org.apache.xml.internal.utils.,\ com.sun.org.glassfish.,\ com.oracle.xmlns.internal.,\ com.oracle.webservices.internal.,\ oracle.jrockit.jfr.,\ org.jcp.xml.dsig.internal.,\ jdk.internal.,\ jdk.nashorn.internal.,\ jdk.nashorn.tools.,\ com.sun.activation.registries. # # Determines whether this properties file can be appended to # or overridden on the command line via -Djava.security.properties # security.overridePropertiesFile=true # # Determines the default key and trust manager factory algorithms for # the javax.net.ssl package. # ssl.KeyManagerFactory.algorithm=SunX509 ssl.TrustManagerFactory.algorithm=PKIX # # The Java-level namelookup cache policy for successful lookups: # # any negative value: caching forever # any positive value: the number of seconds to cache an address for # zero: do not cache # # default value is forever (FOREVER). For security reasons, this # caching is made forever when a security manager is set. When a security # manager is not set, the default behavior in this implementation # is to cache for 30 seconds. # # NOTE: setting this to anything other than the default value can have # serious security implications. Do not set it unless # you are sure you are not exposed to DNS spoofing attack. # #networkaddress.cache.ttl=-1 # The Java-level namelookup cache policy for failed lookups: # # any negative value: cache forever # any positive value: the number of seconds to cache negative lookup results # zero: do not cache # # In some Microsoft Windows networking environments that employ # the WINS name service in addition to DNS, name service lookups # that fail may take a noticeably long time to return (approx. 5 seconds). # For this reason the default caching policy is to maintain these # results for 10 seconds. # # networkaddress.cache.negative.ttl=10 # # Properties to configure OCSP for certificate revocation checking # # Enable OCSP # # By default, OCSP is not used for certificate revocation checking. # This property enables the use of OCSP when set to the value "true". # # NOTE: SocketPermission is required to connect to an OCSP responder. # # Example, # ocsp.enable=true # # Location of the OCSP responder # # By default, the location of the OCSP responder is determined implicitly # from the certificate being validated. This property explicitly specifies # the location of the OCSP responder. The property is used when the # Authority Information Access extension (defined in RFC 3280) is absent # from the certificate or when it requires overriding. # # Example, # ocsp.responderURL=http://ocsp.example.net:80 # # Subject name of the OCSP responder's certificate # # By default, the certificate of the OCSP responder is that of the issuer # of the certificate being validated. This property identifies the certificate # of the OCSP responder when the default does not apply. Its value is a string # distinguished name (defined in RFC 2253) which identifies a certificate in # the set of certificates supplied during cert path validation. In cases where # the subject name alone is not sufficient to uniquely identify the certificate # then both the "ocsp.responderCertIssuerName" and # "ocsp.responderCertSerialNumber" properties must be used instead. When this # property is set then those two properties are ignored. # # Example, # ocsp.responderCertSubjectName="CN=OCSP Responder, O=XYZ Corp" # # Issuer name of the OCSP responder's certificate # # By default, the certificate of the OCSP responder is that of the issuer # of the certificate being validated. This property identifies the certificate # of the OCSP responder when the default does not apply. Its value is a string # distinguished name (defined in RFC 2253) which identifies a certificate in # the set of certificates supplied during cert path validation. When this # property is set then the "ocsp.responderCertSerialNumber" property must also # be set. When the "ocsp.responderCertSubjectName" property is set then this # property is ignored. # # Example, # ocsp.responderCertIssuerName="CN=Enterprise CA, O=XYZ Corp" # # Serial number of the OCSP responder's certificate # # By default, the certificate of the OCSP responder is that of the issuer # of the certificate being validated. This property identifies the certificate # of the OCSP responder when the default does not apply. Its value is a string # of hexadecimal digits (colon or space separators may be present) which # identifies a certificate in the set of certificates supplied during cert path # validation. When this property is set then the "ocsp.responderCertIssuerName" # property must also be set. When the "ocsp.responderCertSubjectName" property # is set then this property is ignored. # # Example, # ocsp.responderCertSerialNumber=2A:FF:00 # # Policy for failed Kerberos KDC lookups: # # When a KDC is unavailable (network error, service failure, etc), it is # put inside a blacklist and accessed less often for future requests. The # value (case-insensitive) for this policy can be: # # tryLast # KDCs in the blacklist are always tried after those not on the list. # # tryLess[:max_retries,timeout] # KDCs in the blacklist are still tried by their order in the configuration, # but with smaller max_retries and timeout values. max_retries and timeout # are optional numerical parameters (default 1 and 5000, which means once # and 5 seconds). Please notes that if any of the values defined here is # more than what is defined in krb5.conf, it will be ignored. # # Whenever a KDC is detected as available, it is removed from the blacklist. # The blacklist is reset when krb5.conf is reloaded. You can add # refreshKrb5Config=true to a JAAS configuration file so that krb5.conf is # reloaded whenever a JAAS authentication is attempted. # # Example, # krb5.kdc.bad.policy = tryLast # krb5.kdc.bad.policy = tryLess:2,2000 krb5.kdc.bad.policy = tryLast # Algorithm restrictions for certification path (CertPath) processing # # In some environments, certain algorithms or key lengths may be undesirable # for certification path building and validation. For example, "MD2" is # generally no longer considered to be a secure hash algorithm. This section # describes the mechanism for disabling algorithms based on algorithm name # and/or key length. This includes algorithms used in certificates, as well # as revocation information such as CRLs and signed OCSP Responses. # # The syntax of the disabled algorithm string is described as this Java # BNF-style: # DisabledAlgorithms: # " DisabledAlgorithm { , DisabledAlgorithm } " # # DisabledAlgorithm: # AlgorithmName [Constraint] # # AlgorithmName: # (see below) # # Constraint: # KeySizeConstraint # # KeySizeConstraint: # keySize Operator DecimalInteger # # Operator: # <= | < | == | != | >= | > # # DecimalInteger: # DecimalDigits # # DecimalDigits: # DecimalDigit {DecimalDigit} # # DecimalDigit: one of # 1 2 3 4 5 6 7 8 9 0 # # The "AlgorithmName" is the standard algorithm name of the disabled # algorithm. See "Java Cryptography Architecture Standard Algorithm Name # Documentation" for information about Standard Algorithm Names. Matching # is performed using a case-insensitive sub-element matching rule. (For # example, in "SHA1withECDSA" the sub-elements are "SHA1" for hashing and # "ECDSA" for signatures.) If the assertion "AlgorithmName" is a # sub-element of the certificate algorithm name, the algorithm will be # rejected during certification path building and validation. For example, # the assertion algorithm name "DSA" will disable all certificate algorithms # that rely on DSA, such as NONEwithDSA, SHA1withDSA. However, the assertion # will not disable algorithms related to "ECDSA". # # A "Constraint" provides further guidance for the algorithm being specified. # The "KeySizeConstraint" requires a key of a valid size range if the # "AlgorithmName" is of a key algorithm. The "DecimalInteger" indicates the # key size specified in number of bits. For example, "RSA keySize <= 1024" # indicates that any RSA key with key size less than or equal to 1024 bits # should be disabled, and "RSA keySize < 1024, RSA keySize > 2048" indicates # that any RSA key with key size less than 1024 or greater than 2048 should # be disabled. Note that the "KeySizeConstraint" only makes sense to key # algorithms. # # Note: This property is currently used by Oracle's PKIX implementation. It # is not guaranteed to be examined and used by other implementations. # # Example: # jdk.certpath.disabledAlgorithms=MD2, DSA, RSA keySize < 2048 # # jdk.certpath.disabledAlgorithms=MD2, RSA keySize < 1024 # Algorithm restrictions for Secure Socket Layer/Transport Layer Security # (SSL/TLS) processing # # In some environments, certain algorithms or key lengths may be undesirable # when using SSL/TLS. This section describes the mechanism for disabling # algorithms during SSL/TLS security parameters negotiation, including # protocol version negotiation, cipher suites selection, peer authentication # and key exchange mechanisms. # # Disabled algorithms will not be negotiated for SSL/TLS connections, even # if they are enabled explicitly in an application. # # For PKI-based peer authentication and key exchange mechanisms, this list # of disabled algorithms will also be checked during certification path # building and validation, including algorithms used in certificates, as # well as revocation information such as CRLs and signed OCSP Responses. # This is in addition to the jdk.certpath.disabledAlgorithms property above. # # See the specification of "jdk.certpath.disabledAlgorithms" for the # syntax of the disabled algorithm string. # # Note: This property is currently used by Oracle's JSSE implementation. # It is not guaranteed to be examined and used by other implementations. # # Example: # jdk.tls.disabledAlgorithms=MD5, SSLv3, DSA, RSA keySize < 2048 jdk.tls.disabledAlgorithms=SSLv3