/* * Copyright 1997-2010 Sun Microsystems, Inc. All Rights Reserved. * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. * * This code is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 only, as * published by the Free Software Foundation. * * This code is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * version 2 for more details (a copy is included in the LICENSE file that * accompanied this code). * * You should have received a copy of the GNU General Public License version * 2 along with this work; if not, write to the Free Software Foundation, * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. * * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, * CA 95054 USA or visit www.sun.com if you need additional information or * have any questions. * */ #include "incls/_precompiled.incl" #include "incls/_stubGenerator_sparc.cpp.incl" // Declaration and definition of StubGenerator (no .hpp file). // For a more detailed description of the stub routine structure // see the comment in stubRoutines.hpp. #define __ _masm-> #ifdef PRODUCT #define BLOCK_COMMENT(str) /* nothing */ #else #define BLOCK_COMMENT(str) __ block_comment(str) #endif #define BIND(label) bind(label); BLOCK_COMMENT(#label ":") // Note: The register L7 is used as L7_thread_cache, and may not be used // any other way within this module. static const Register& Lstub_temp = L2; // ------------------------------------------------------------------------------------------------------------------------- // Stub Code definitions static address handle_unsafe_access() { JavaThread* thread = JavaThread::current(); address pc = thread->saved_exception_pc(); address npc = thread->saved_exception_npc(); // pc is the instruction which we must emulate // doing a no-op is fine: return garbage from the load // request an async exception thread->set_pending_unsafe_access_error(); // return address of next instruction to execute return npc; } class StubGenerator: public StubCodeGenerator { private: #ifdef PRODUCT #define inc_counter_np(a,b,c) (0) #else #define inc_counter_np(counter, t1, t2) \ BLOCK_COMMENT("inc_counter " #counter); \ __ inc_counter(&counter, t1, t2); #endif //---------------------------------------------------------------------------------------------------- // Call stubs are used to call Java from C address generate_call_stub(address& return_pc) { StubCodeMark mark(this, "StubRoutines", "call_stub"); address start = __ pc(); // Incoming arguments: // // o0 : call wrapper address // o1 : result (address) // o2 : result type // o3 : method // o4 : (interpreter) entry point // o5 : parameters (address) // [sp + 0x5c]: parameter size (in words) // [sp + 0x60]: thread // // +---------------+ <--- sp + 0 // | | // . reg save area . // | | // +---------------+ <--- sp + 0x40 // | | // . extra 7 slots . // | | // +---------------+ <--- sp + 0x5c // | param. size | // +---------------+ <--- sp + 0x60 // | thread | // +---------------+ // | | // note: if the link argument position changes, adjust // the code in frame::entry_frame_call_wrapper() const Argument link = Argument(0, false); // used only for GC const Argument result = Argument(1, false); const Argument result_type = Argument(2, false); const Argument method = Argument(3, false); const Argument entry_point = Argument(4, false); const Argument parameters = Argument(5, false); const Argument parameter_size = Argument(6, false); const Argument thread = Argument(7, false); // setup thread register __ ld_ptr(thread.as_address(), G2_thread); __ reinit_heapbase(); #ifdef ASSERT // make sure we have no pending exceptions { const Register t = G3_scratch; Label L; __ ld_ptr(G2_thread, in_bytes(Thread::pending_exception_offset()), t); __ br_null(t, false, Assembler::pt, L); __ delayed()->nop(); __ stop("StubRoutines::call_stub: entered with pending exception"); __ bind(L); } #endif // create activation frame & allocate space for parameters { const Register t = G3_scratch; __ ld_ptr(parameter_size.as_address(), t); // get parameter size (in words) __ add(t, frame::memory_parameter_word_sp_offset, t); // add space for save area (in words) __ round_to(t, WordsPerLong); // make sure it is multiple of 2 (in words) __ sll(t, Interpreter::logStackElementSize(), t); // compute number of bytes __ neg(t); // negate so it can be used with save __ save(SP, t, SP); // setup new frame } // +---------------+ <--- sp + 0 // | | // . reg save area . // | | // +---------------+ <--- sp + 0x40 // | | // . extra 7 slots . // | | // +---------------+ <--- sp + 0x5c // | empty slot | (only if parameter size is even) // +---------------+ // | | // . parameters . // | | // +---------------+ <--- fp + 0 // | | // . reg save area . // | | // +---------------+ <--- fp + 0x40 // | | // . extra 7 slots . // | | // +---------------+ <--- fp + 0x5c // | param. size | // +---------------+ <--- fp + 0x60 // | thread | // +---------------+ // | | // pass parameters if any BLOCK_COMMENT("pass parameters if any"); { const Register src = parameters.as_in().as_register(); const Register dst = Lentry_args; const Register tmp = G3_scratch; const Register cnt = G4_scratch; // test if any parameters & setup of Lentry_args Label exit; __ ld_ptr(parameter_size.as_in().as_address(), cnt); // parameter counter __ add( FP, STACK_BIAS, dst ); __ tst(cnt); __ br(Assembler::zero, false, Assembler::pn, exit); __ delayed()->sub(dst, BytesPerWord, dst); // setup Lentry_args // copy parameters if any Label loop; __ BIND(loop); // Store tag first. if (TaggedStackInterpreter) { __ ld_ptr(src, 0, tmp); __ add(src, BytesPerWord, src); // get next __ st_ptr(tmp, dst, Interpreter::tag_offset_in_bytes()); } // Store parameter value __ ld_ptr(src, 0, tmp); __ add(src, BytesPerWord, src); __ st_ptr(tmp, dst, Interpreter::value_offset_in_bytes()); __ deccc(cnt); __ br(Assembler::greater, false, Assembler::pt, loop); __ delayed()->sub(dst, Interpreter::stackElementSize(), dst); // done __ BIND(exit); } // setup parameters, method & call Java function #ifdef ASSERT // layout_activation_impl checks it's notion of saved SP against // this register, so if this changes update it as well. const Register saved_SP = Lscratch; __ mov(SP, saved_SP); // keep track of SP before call #endif // setup parameters const Register t = G3_scratch; __ ld_ptr(parameter_size.as_in().as_address(), t); // get parameter size (in words) __ sll(t, Interpreter::logStackElementSize(), t); // compute number of bytes __ sub(FP, t, Gargs); // setup parameter pointer #ifdef _LP64 __ add( Gargs, STACK_BIAS, Gargs ); // Account for LP64 stack bias #endif __ mov(SP, O5_savedSP); // do the call // // the following register must be setup: // // G2_thread // G5_method // Gargs BLOCK_COMMENT("call Java function"); __ jmpl(entry_point.as_in().as_register(), G0, O7); __ delayed()->mov(method.as_in().as_register(), G5_method); // setup method BLOCK_COMMENT("call_stub_return_address:"); return_pc = __ pc(); // The callee, if it wasn't interpreted, can return with SP changed so // we can no longer assert of change of SP. // store result depending on type // (everything that is not T_OBJECT, T_LONG, T_FLOAT, or T_DOUBLE // is treated as T_INT) { const Register addr = result .as_in().as_register(); const Register type = result_type.as_in().as_register(); Label is_long, is_float, is_double, is_object, exit; __ cmp(type, T_OBJECT); __ br(Assembler::equal, false, Assembler::pn, is_object); __ delayed()->cmp(type, T_FLOAT); __ br(Assembler::equal, false, Assembler::pn, is_float); __ delayed()->cmp(type, T_DOUBLE); __ br(Assembler::equal, false, Assembler::pn, is_double); __ delayed()->cmp(type, T_LONG); __ br(Assembler::equal, false, Assembler::pn, is_long); __ delayed()->nop(); // store int result __ st(O0, addr, G0); __ BIND(exit); __ ret(); __ delayed()->restore(); __ BIND(is_object); __ ba(false, exit); __ delayed()->st_ptr(O0, addr, G0); __ BIND(is_float); __ ba(false, exit); __ delayed()->stf(FloatRegisterImpl::S, F0, addr, G0); __ BIND(is_double); __ ba(false, exit); __ delayed()->stf(FloatRegisterImpl::D, F0, addr, G0); __ BIND(is_long); #ifdef _LP64 __ ba(false, exit); __ delayed()->st_long(O0, addr, G0); // store entire long #else #if defined(COMPILER2) // All return values are where we want them, except for Longs. C2 returns // longs in G1 in the 32-bit build whereas the interpreter wants them in O0/O1. // Since the interpreter will return longs in G1 and O0/O1 in the 32bit // build we simply always use G1. // Note: I tried to make c2 return longs in O0/O1 and G1 so we wouldn't have to // do this here. Unfortunately if we did a rethrow we'd see an machepilog node // first which would move g1 -> O0/O1 and destroy the exception we were throwing. __ ba(false, exit); __ delayed()->stx(G1, addr, G0); // store entire long #else __ st(O1, addr, BytesPerInt); __ ba(false, exit); __ delayed()->st(O0, addr, G0); #endif /* COMPILER2 */ #endif /* _LP64 */ } return start; } //---------------------------------------------------------------------------------------------------- // Return point for a Java call if there's an exception thrown in Java code. // The exception is caught and transformed into a pending exception stored in // JavaThread that can be tested from within the VM. // // Oexception: exception oop address generate_catch_exception() { StubCodeMark mark(this, "StubRoutines", "catch_exception"); address start = __ pc(); // verify that thread corresponds __ verify_thread(); const Register& temp_reg = Gtemp; Address pending_exception_addr (G2_thread, Thread::pending_exception_offset()); Address exception_file_offset_addr(G2_thread, Thread::exception_file_offset ()); Address exception_line_offset_addr(G2_thread, Thread::exception_line_offset ()); // set pending exception __ verify_oop(Oexception); __ st_ptr(Oexception, pending_exception_addr); __ set((intptr_t)__FILE__, temp_reg); __ st_ptr(temp_reg, exception_file_offset_addr); __ set((intptr_t)__LINE__, temp_reg); __ st(temp_reg, exception_line_offset_addr); // complete return to VM assert(StubRoutines::_call_stub_return_address != NULL, "must have been generated before"); AddressLiteral stub_ret(StubRoutines::_call_stub_return_address); __ jump_to(stub_ret, temp_reg); __ delayed()->nop(); return start; } //---------------------------------------------------------------------------------------------------- // Continuation point for runtime calls returning with a pending exception // The pending exception check happened in the runtime or native call stub // The pending exception in Thread is converted into a Java-level exception // // Contract with Java-level exception handler: O0 = exception // O1 = throwing pc address generate_forward_exception() { StubCodeMark mark(this, "StubRoutines", "forward_exception"); address start = __ pc(); // Upon entry, O7 has the return address returning into Java // (interpreted or compiled) code; i.e. the return address // becomes the throwing pc. const Register& handler_reg = Gtemp; Address exception_addr(G2_thread, Thread::pending_exception_offset()); #ifdef ASSERT // make sure that this code is only executed if there is a pending exception { Label L; __ ld_ptr(exception_addr, Gtemp); __ br_notnull(Gtemp, false, Assembler::pt, L); __ delayed()->nop(); __ stop("StubRoutines::forward exception: no pending exception (1)"); __ bind(L); } #endif // compute exception handler into handler_reg __ get_thread(); __ ld_ptr(exception_addr, Oexception); __ verify_oop(Oexception); __ save_frame(0); // compensates for compiler weakness __ add(O7->after_save(), frame::pc_return_offset, Lscratch); // save the issuing PC BLOCK_COMMENT("call exception_handler_for_return_address"); __ call_VM_leaf(L7_thread_cache, CAST_FROM_FN_PTR(address, SharedRuntime::exception_handler_for_return_address), Lscratch); __ mov(O0, handler_reg); __ restore(); // compensates for compiler weakness __ ld_ptr(exception_addr, Oexception); __ add(O7, frame::pc_return_offset, Oissuing_pc); // save the issuing PC #ifdef ASSERT // make sure exception is set { Label L; __ br_notnull(Oexception, false, Assembler::pt, L); __ delayed()->nop(); __ stop("StubRoutines::forward exception: no pending exception (2)"); __ bind(L); } #endif // jump to exception handler __ jmp(handler_reg, 0); // clear pending exception __ delayed()->st_ptr(G0, exception_addr); return start; } //------------------------------------------------------------------------------------------------------------------------ // Continuation point for throwing of implicit exceptions that are not handled in // the current activation. Fabricates an exception oop and initiates normal // exception dispatching in this frame. Only callee-saved registers are preserved // (through the normal register window / RegisterMap handling). // If the compiler needs all registers to be preserved between the fault // point and the exception handler then it must assume responsibility for that in // AbstractCompiler::continuation_for_implicit_null_exception or // continuation_for_implicit_division_by_zero_exception. All other implicit // exceptions (e.g., NullPointerException or AbstractMethodError on entry) are // either at call sites or otherwise assume that stack unwinding will be initiated, // so caller saved registers were assumed volatile in the compiler. // Note that we generate only this stub into a RuntimeStub, because it needs to be // properly traversed and ignored during GC, so we change the meaning of the "__" // macro within this method. #undef __ #define __ masm-> address generate_throw_exception(const char* name, address runtime_entry, bool restore_saved_exception_pc) { #ifdef ASSERT int insts_size = VerifyThread ? 1 * K : 600; #else int insts_size = VerifyThread ? 1 * K : 256; #endif /* ASSERT */ int locs_size = 32; CodeBuffer code(name, insts_size, locs_size); MacroAssembler* masm = new MacroAssembler(&code); __ verify_thread(); // This is an inlined and slightly modified version of call_VM // which has the ability to fetch the return PC out of thread-local storage __ assert_not_delayed(); // Note that we always push a frame because on the SPARC // architecture, for all of our implicit exception kinds at call // sites, the implicit exception is taken before the callee frame // is pushed. __ save_frame(0); int frame_complete = __ offset(); if (restore_saved_exception_pc) { __ ld_ptr(G2_thread, JavaThread::saved_exception_pc_offset(), I7); __ sub(I7, frame::pc_return_offset, I7); } // Note that we always have a runtime stub frame on the top of stack by this point Register last_java_sp = SP; // 64-bit last_java_sp is biased! __ set_last_Java_frame(last_java_sp, G0); if (VerifyThread) __ mov(G2_thread, O0); // about to be smashed; pass early __ save_thread(noreg); // do the call BLOCK_COMMENT("call runtime_entry"); __ call(runtime_entry, relocInfo::runtime_call_type); if (!VerifyThread) __ delayed()->mov(G2_thread, O0); // pass thread as first argument else __ delayed()->nop(); // (thread already passed) __ restore_thread(noreg); __ reset_last_Java_frame(); // check for pending exceptions. use Gtemp as scratch register. #ifdef ASSERT Label L; Address exception_addr(G2_thread, Thread::pending_exception_offset()); Register scratch_reg = Gtemp; __ ld_ptr(exception_addr, scratch_reg); __ br_notnull(scratch_reg, false, Assembler::pt, L); __ delayed()->nop(); __ should_not_reach_here(); __ bind(L); #endif // ASSERT BLOCK_COMMENT("call forward_exception_entry"); __ call(StubRoutines::forward_exception_entry(), relocInfo::runtime_call_type); // we use O7 linkage so that forward_exception_entry has the issuing PC __ delayed()->restore(); RuntimeStub* stub = RuntimeStub::new_runtime_stub(name, &code, frame_complete, masm->total_frame_size_in_bytes(0), NULL, false); return stub->entry_point(); } #undef __ #define __ _masm-> // Generate a routine that sets all the registers so we // can tell if the stop routine prints them correctly. address generate_test_stop() { StubCodeMark mark(this, "StubRoutines", "test_stop"); address start = __ pc(); int i; __ save_frame(0); static jfloat zero = 0.0, one = 1.0; // put addr in L0, then load through L0 to F0 __ set((intptr_t)&zero, L0); __ ldf( FloatRegisterImpl::S, L0, 0, F0); __ set((intptr_t)&one, L0); __ ldf( FloatRegisterImpl::S, L0, 0, F1); // 1.0 to F1 // use add to put 2..18 in F2..F18 for ( i = 2; i <= 18; ++i ) { __ fadd( FloatRegisterImpl::S, F1, as_FloatRegister(i-1), as_FloatRegister(i)); } // Now put double 2 in F16, double 18 in F18 __ ftof( FloatRegisterImpl::S, FloatRegisterImpl::D, F2, F16 ); __ ftof( FloatRegisterImpl::S, FloatRegisterImpl::D, F18, F18 ); // use add to put 20..32 in F20..F32 for (i = 20; i < 32; i += 2) { __ fadd( FloatRegisterImpl::D, F16, as_FloatRegister(i-2), as_FloatRegister(i)); } // put 0..7 in i's, 8..15 in l's, 16..23 in o's, 24..31 in g's for ( i = 0; i < 8; ++i ) { if (i < 6) { __ set( i, as_iRegister(i)); __ set(16 + i, as_oRegister(i)); __ set(24 + i, as_gRegister(i)); } __ set( 8 + i, as_lRegister(i)); } __ stop("testing stop"); __ ret(); __ delayed()->restore(); return start; } address generate_stop_subroutine() { StubCodeMark mark(this, "StubRoutines", "stop_subroutine"); address start = __ pc(); __ stop_subroutine(); return start; } address generate_flush_callers_register_windows() { StubCodeMark mark(this, "StubRoutines", "flush_callers_register_windows"); address start = __ pc(); __ flush_windows(); __ retl(false); __ delayed()->add( FP, STACK_BIAS, O0 ); // The returned value must be a stack pointer whose register save area // is flushed, and will stay flushed while the caller executes. return start; } // Helper functions for v8 atomic operations. // void get_v8_oop_lock_ptr(Register lock_ptr_reg, Register mark_oop_reg, Register scratch_reg) { if (mark_oop_reg == noreg) { address lock_ptr = (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(); __ set((intptr_t)lock_ptr, lock_ptr_reg); } else { assert(scratch_reg != noreg, "just checking"); address lock_ptr = (address)StubRoutines::Sparc::_v8_oop_lock_cache; __ set((intptr_t)lock_ptr, lock_ptr_reg); __ and3(mark_oop_reg, StubRoutines::Sparc::v8_oop_lock_mask_in_place, scratch_reg); __ add(lock_ptr_reg, scratch_reg, lock_ptr_reg); } } void generate_v8_lock_prologue(Register lock_reg, Register lock_ptr_reg, Register yield_reg, Label& retry, Label& dontyield, Register mark_oop_reg = noreg, Register scratch_reg = noreg) { get_v8_oop_lock_ptr(lock_ptr_reg, mark_oop_reg, scratch_reg); __ set(StubRoutines::Sparc::locked, lock_reg); // Initialize yield counter __ mov(G0,yield_reg); __ BIND(retry); __ cmp(yield_reg, V8AtomicOperationUnderLockSpinCount); __ br(Assembler::less, false, Assembler::pt, dontyield); __ delayed()->nop(); // This code can only be called from inside the VM, this // stub is only invoked from Atomic::add(). We do not // want to use call_VM, because _last_java_sp and such // must already be set. // // Save the regs and make space for a C call __ save(SP, -96, SP); __ save_all_globals_into_locals(); BLOCK_COMMENT("call os::naked_sleep"); __ call(CAST_FROM_FN_PTR(address, os::naked_sleep)); __ delayed()->nop(); __ restore_globals_from_locals(); __ restore(); // reset the counter __ mov(G0,yield_reg); __ BIND(dontyield); // try to get lock __ swap(lock_ptr_reg, 0, lock_reg); // did we get the lock? __ cmp(lock_reg, StubRoutines::Sparc::unlocked); __ br(Assembler::notEqual, true, Assembler::pn, retry); __ delayed()->add(yield_reg,1,yield_reg); // yes, got lock. do the operation here. } void generate_v8_lock_epilogue(Register lock_reg, Register lock_ptr_reg, Register yield_reg, Label& retry, Label& dontyield, Register mark_oop_reg = noreg, Register scratch_reg = noreg) { __ st(lock_reg, lock_ptr_reg, 0); // unlock } // Support for jint Atomic::xchg(jint exchange_value, volatile jint* dest). // // Arguments : // // exchange_value: O0 // dest: O1 // // Results: // // O0: the value previously stored in dest // address generate_atomic_xchg() { StubCodeMark mark(this, "StubRoutines", "atomic_xchg"); address start = __ pc(); if (UseCASForSwap) { // Use CAS instead of swap, just in case the MP hardware // prefers to work with just one kind of synch. instruction. Label retry; __ BIND(retry); __ mov(O0, O3); // scratch copy of exchange value __ ld(O1, 0, O2); // observe the previous value // try to replace O2 with O3 __ cas_under_lock(O1, O2, O3, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(),false); __ cmp(O2, O3); __ br(Assembler::notEqual, false, Assembler::pn, retry); __ delayed()->nop(); __ retl(false); __ delayed()->mov(O2, O0); // report previous value to caller } else { if (VM_Version::v9_instructions_work()) { __ retl(false); __ delayed()->swap(O1, 0, O0); } else { const Register& lock_reg = O2; const Register& lock_ptr_reg = O3; const Register& yield_reg = O4; Label retry; Label dontyield; generate_v8_lock_prologue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); // got the lock, do the swap __ swap(O1, 0, O0); generate_v8_lock_epilogue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); __ retl(false); __ delayed()->nop(); } } return start; } // Support for jint Atomic::cmpxchg(jint exchange_value, volatile jint* dest, jint compare_value) // // Arguments : // // exchange_value: O0 // dest: O1 // compare_value: O2 // // Results: // // O0: the value previously stored in dest // // Overwrites (v8): O3,O4,O5 // address generate_atomic_cmpxchg() { StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg"); address start = __ pc(); // cmpxchg(dest, compare_value, exchange_value) __ cas_under_lock(O1, O2, O0, (address)StubRoutines::Sparc::atomic_memory_operation_lock_addr(),false); __ retl(false); __ delayed()->nop(); return start; } // Support for jlong Atomic::cmpxchg(jlong exchange_value, volatile jlong *dest, jlong compare_value) // // Arguments : // // exchange_value: O1:O0 // dest: O2 // compare_value: O4:O3 // // Results: // // O1:O0: the value previously stored in dest // // This only works on V9, on V8 we don't generate any // code and just return NULL. // // Overwrites: G1,G2,G3 // address generate_atomic_cmpxchg_long() { StubCodeMark mark(this, "StubRoutines", "atomic_cmpxchg_long"); address start = __ pc(); if (!VM_Version::supports_cx8()) return NULL;; __ sllx(O0, 32, O0); __ srl(O1, 0, O1); __ or3(O0,O1,O0); // O0 holds 64-bit value from compare_value __ sllx(O3, 32, O3); __ srl(O4, 0, O4); __ or3(O3,O4,O3); // O3 holds 64-bit value from exchange_value __ casx(O2, O3, O0); __ srl(O0, 0, O1); // unpacked return value in O1:O0 __ retl(false); __ delayed()->srlx(O0, 32, O0); return start; } // Support for jint Atomic::add(jint add_value, volatile jint* dest). // // Arguments : // // add_value: O0 (e.g., +1 or -1) // dest: O1 // // Results: // // O0: the new value stored in dest // // Overwrites (v9): O3 // Overwrites (v8): O3,O4,O5 // address generate_atomic_add() { StubCodeMark mark(this, "StubRoutines", "atomic_add"); address start = __ pc(); __ BIND(_atomic_add_stub); if (VM_Version::v9_instructions_work()) { Label(retry); __ BIND(retry); __ lduw(O1, 0, O2); __ add(O0, O2, O3); __ cas(O1, O2, O3); __ cmp( O2, O3); __ br(Assembler::notEqual, false, Assembler::pn, retry); __ delayed()->nop(); __ retl(false); __ delayed()->add(O0, O2, O0); // note that cas made O2==O3 } else { const Register& lock_reg = O2; const Register& lock_ptr_reg = O3; const Register& value_reg = O4; const Register& yield_reg = O5; Label(retry); Label(dontyield); generate_v8_lock_prologue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); // got lock, do the increment __ ld(O1, 0, value_reg); __ add(O0, value_reg, value_reg); __ st(value_reg, O1, 0); // %%% only for RMO and PSO __ membar(Assembler::StoreStore); generate_v8_lock_epilogue(lock_reg, lock_ptr_reg, yield_reg, retry, dontyield); __ retl(false); __ delayed()->mov(value_reg, O0); } return start; } Label _atomic_add_stub; // called from other stubs //------------------------------------------------------------------------------------------------------------------------ // The following routine generates a subroutine to throw an asynchronous // UnknownError when an unsafe access gets a fault that could not be // reasonably prevented by the programmer. (Example: SIGBUS/OBJERR.) // // Arguments : // // trapping PC: O7 // // Results: // posts an asynchronous exception, skips the trapping instruction // address generate_handler_for_unsafe_access() { StubCodeMark mark(this, "StubRoutines", "handler_for_unsafe_access"); address start = __ pc(); const int preserve_register_words = (64 * 2); Address preserve_addr(FP, (-preserve_register_words * wordSize) + STACK_BIAS); Register Lthread = L7_thread_cache; int i; __ save_frame(0); __ mov(G1, L1); __ mov(G2, L2); __ mov(G3, L3); __ mov(G4, L4); __ mov(G5, L5); for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { __ stf(FloatRegisterImpl::D, as_FloatRegister(i), preserve_addr, i * wordSize); } address entry_point = CAST_FROM_FN_PTR(address, handle_unsafe_access); BLOCK_COMMENT("call handle_unsafe_access"); __ call(entry_point, relocInfo::runtime_call_type); __ delayed()->nop(); __ mov(L1, G1); __ mov(L2, G2); __ mov(L3, G3); __ mov(L4, G4); __ mov(L5, G5); for (i = 0; i < (VM_Version::v9_instructions_work() ? 64 : 32); i += 2) { __ ldf(FloatRegisterImpl::D, preserve_addr, as_FloatRegister(i), i * wordSize); } __ verify_thread(); __ jmp(O0, 0); __ delayed()->restore(); return start; } // Support for uint StubRoutine::Sparc::partial_subtype_check( Klass sub, Klass super ); // Arguments : // // ret : O0, returned // icc/xcc: set as O0 (depending on wordSize) // sub : O1, argument, not changed // super: O2, argument, not changed // raddr: O7, blown by call address generate_partial_subtype_check() { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", "partial_subtype_check"); address start = __ pc(); Label miss; #if defined(COMPILER2) && !defined(_LP64) // Do not use a 'save' because it blows the 64-bit O registers. __ add(SP,-4*wordSize,SP); // Make space for 4 temps (stack must be 2 words aligned) __ st_ptr(L0,SP,(frame::register_save_words+0)*wordSize); __ st_ptr(L1,SP,(frame::register_save_words+1)*wordSize); __ st_ptr(L2,SP,(frame::register_save_words+2)*wordSize); __ st_ptr(L3,SP,(frame::register_save_words+3)*wordSize); Register Rret = O0; Register Rsub = O1; Register Rsuper = O2; #else __ save_frame(0); Register Rret = I0; Register Rsub = I1; Register Rsuper = I2; #endif Register L0_ary_len = L0; Register L1_ary_ptr = L1; Register L2_super = L2; Register L3_index = L3; __ check_klass_subtype_slow_path(Rsub, Rsuper, L0, L1, L2, L3, NULL, &miss); // Match falls through here. __ addcc(G0,0,Rret); // set Z flags, Z result #if defined(COMPILER2) && !defined(_LP64) __ ld_ptr(SP,(frame::register_save_words+0)*wordSize,L0); __ ld_ptr(SP,(frame::register_save_words+1)*wordSize,L1); __ ld_ptr(SP,(frame::register_save_words+2)*wordSize,L2); __ ld_ptr(SP,(frame::register_save_words+3)*wordSize,L3); __ retl(); // Result in Rret is zero; flags set to Z __ delayed()->add(SP,4*wordSize,SP); #else __ ret(); // Result in Rret is zero; flags set to Z __ delayed()->restore(); #endif __ BIND(miss); __ addcc(G0,1,Rret); // set NZ flags, NZ result #if defined(COMPILER2) && !defined(_LP64) __ ld_ptr(SP,(frame::register_save_words+0)*wordSize,L0); __ ld_ptr(SP,(frame::register_save_words+1)*wordSize,L1); __ ld_ptr(SP,(frame::register_save_words+2)*wordSize,L2); __ ld_ptr(SP,(frame::register_save_words+3)*wordSize,L3); __ retl(); // Result in Rret is != 0; flags set to NZ __ delayed()->add(SP,4*wordSize,SP); #else __ ret(); // Result in Rret is != 0; flags set to NZ __ delayed()->restore(); #endif return start; } // Called from MacroAssembler::verify_oop // address generate_verify_oop_subroutine() { StubCodeMark mark(this, "StubRoutines", "verify_oop_stub"); address start = __ pc(); __ verify_oop_subroutine(); return start; } static address disjoint_byte_copy_entry; static address disjoint_short_copy_entry; static address disjoint_int_copy_entry; static address disjoint_long_copy_entry; static address disjoint_oop_copy_entry; static address byte_copy_entry; static address short_copy_entry; static address int_copy_entry; static address long_copy_entry; static address oop_copy_entry; static address checkcast_copy_entry; // // Verify that a register contains clean 32-bits positive value // (high 32-bits are 0) so it could be used in 64-bits shifts (sllx, srax). // // Input: // Rint - 32-bits value // Rtmp - scratch // void assert_clean_int(Register Rint, Register Rtmp) { #if defined(ASSERT) && defined(_LP64) __ signx(Rint, Rtmp); __ cmp(Rint, Rtmp); __ breakpoint_trap(Assembler::notEqual, Assembler::xcc); #endif } // // Generate overlap test for array copy stubs // // Input: // O0 - array1 // O1 - array2 // O2 - element count // // Kills temps: O3, O4 // void array_overlap_test(address no_overlap_target, int log2_elem_size) { assert(no_overlap_target != NULL, "must be generated"); array_overlap_test(no_overlap_target, NULL, log2_elem_size); } void array_overlap_test(Label& L_no_overlap, int log2_elem_size) { array_overlap_test(NULL, &L_no_overlap, log2_elem_size); } void array_overlap_test(address no_overlap_target, Label* NOLp, int log2_elem_size) { const Register from = O0; const Register to = O1; const Register count = O2; const Register to_from = O3; // to - from const Register byte_count = O4; // count << log2_elem_size __ subcc(to, from, to_from); __ sll_ptr(count, log2_elem_size, byte_count); if (NOLp == NULL) __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, no_overlap_target); else __ brx(Assembler::lessEqualUnsigned, false, Assembler::pt, (*NOLp)); __ delayed()->cmp(to_from, byte_count); if (NOLp == NULL) __ brx(Assembler::greaterEqual, false, Assembler::pt, no_overlap_target); else __ brx(Assembler::greaterEqual, false, Assembler::pt, (*NOLp)); __ delayed()->nop(); } // // Generate pre-write barrier for array. // // Input: // addr - register containing starting address // count - register containing element count // tmp - scratch register // // The input registers are overwritten. // void gen_write_ref_array_pre_barrier(Register addr, Register count) { BarrierSet* bs = Universe::heap()->barrier_set(); if (bs->has_write_ref_pre_barrier()) { assert(bs->has_write_ref_array_pre_opt(), "Else unsupported barrier set."); __ save_frame(0); // Save the necessary global regs... will be used after. if (addr->is_global()) { __ mov(addr, L0); } if (count->is_global()) { __ mov(count, L1); } __ mov(addr->after_save(), O0); // Get the count into O1 __ call(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_pre)); __ delayed()->mov(count->after_save(), O1); if (addr->is_global()) { __ mov(L0, addr); } if (count->is_global()) { __ mov(L1, count); } __ restore(); } } // // Generate post-write barrier for array. // // Input: // addr - register containing starting address // count - register containing element count // tmp - scratch register // // The input registers are overwritten. // void gen_write_ref_array_post_barrier(Register addr, Register count, Register tmp) { BarrierSet* bs = Universe::heap()->barrier_set(); switch (bs->kind()) { case BarrierSet::G1SATBCT: case BarrierSet::G1SATBCTLogging: { // Get some new fresh output registers. __ save_frame(0); __ mov(addr->after_save(), O0); __ call(CAST_FROM_FN_PTR(address, BarrierSet::static_write_ref_array_post)); __ delayed()->mov(count->after_save(), O1); __ restore(); } break; case BarrierSet::CardTableModRef: case BarrierSet::CardTableExtension: { CardTableModRefBS* ct = (CardTableModRefBS*)bs; assert(sizeof(*ct->byte_map_base) == sizeof(jbyte), "adjust this code"); assert_different_registers(addr, count, tmp); Label L_loop; __ sll_ptr(count, LogBytesPerHeapOop, count); __ sub(count, BytesPerHeapOop, count); __ add(count, addr, count); // Use two shifts to clear out those low order two bits! (Cannot opt. into 1.) __ srl_ptr(addr, CardTableModRefBS::card_shift, addr); __ srl_ptr(count, CardTableModRefBS::card_shift, count); __ sub(count, addr, count); AddressLiteral rs(ct->byte_map_base); __ set(rs, tmp); __ BIND(L_loop); __ stb(G0, tmp, addr); __ subcc(count, 1, count); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); __ delayed()->add(addr, 1, addr); } break; case BarrierSet::ModRef: break; default: ShouldNotReachHere(); } } // Copy big chunks forward with shift // // Inputs: // from - source arrays // to - destination array aligned to 8-bytes // count - elements count to copy >= the count equivalent to 16 bytes // count_dec - elements count's decrement equivalent to 16 bytes // L_copy_bytes - copy exit label // void copy_16_bytes_forward_with_shift(Register from, Register to, Register count, int count_dec, Label& L_copy_bytes) { Label L_loop, L_aligned_copy, L_copy_last_bytes; // if both arrays have the same alignment mod 8, do 8 bytes aligned copy __ andcc(from, 7, G1); // misaligned bytes __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); __ delayed()->nop(); const Register left_shift = G1; // left shift bit counter const Register right_shift = G5; // right shift bit counter __ sll(G1, LogBitsPerByte, left_shift); __ mov(64, right_shift); __ sub(right_shift, left_shift, right_shift); // // Load 2 aligned 8-bytes chunks and use one from previous iteration // to form 2 aligned 8-bytes chunks to store. // __ deccc(count, count_dec); // Pre-decrement 'count' __ andn(from, 7, from); // Align address __ ldx(from, 0, O3); __ inc(from, 8); __ align(16); __ BIND(L_loop); __ ldx(from, 0, O4); __ deccc(count, count_dec); // Can we do next iteration after this one? __ ldx(from, 8, G4); __ inc(to, 16); __ inc(from, 16); __ sllx(O3, left_shift, O3); __ srlx(O4, right_shift, G3); __ bset(G3, O3); __ stx(O3, to, -16); __ sllx(O4, left_shift, O4); __ srlx(G4, right_shift, G3); __ bset(G3, O4); __ stx(O4, to, -8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); __ delayed()->mov(G4, O3); __ inccc(count, count_dec>>1 ); // + 8 bytes __ brx(Assembler::negative, true, Assembler::pn, L_copy_last_bytes); __ delayed()->inc(count, count_dec>>1); // restore 'count' // copy 8 bytes, part of them already loaded in O3 __ ldx(from, 0, O4); __ inc(to, 8); __ inc(from, 8); __ sllx(O3, left_shift, O3); __ srlx(O4, right_shift, G3); __ bset(O3, G3); __ stx(G3, to, -8); __ BIND(L_copy_last_bytes); __ srl(right_shift, LogBitsPerByte, right_shift); // misaligned bytes __ br(Assembler::always, false, Assembler::pt, L_copy_bytes); __ delayed()->sub(from, right_shift, from); // restore address __ BIND(L_aligned_copy); } // Copy big chunks backward with shift // // Inputs: // end_from - source arrays end address // end_to - destination array end address aligned to 8-bytes // count - elements count to copy >= the count equivalent to 16 bytes // count_dec - elements count's decrement equivalent to 16 bytes // L_aligned_copy - aligned copy exit label // L_copy_bytes - copy exit label // void copy_16_bytes_backward_with_shift(Register end_from, Register end_to, Register count, int count_dec, Label& L_aligned_copy, Label& L_copy_bytes) { Label L_loop, L_copy_last_bytes; // if both arrays have the same alignment mod 8, do 8 bytes aligned copy __ andcc(end_from, 7, G1); // misaligned bytes __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); __ delayed()->deccc(count, count_dec); // Pre-decrement 'count' const Register left_shift = G1; // left shift bit counter const Register right_shift = G5; // right shift bit counter __ sll(G1, LogBitsPerByte, left_shift); __ mov(64, right_shift); __ sub(right_shift, left_shift, right_shift); // // Load 2 aligned 8-bytes chunks and use one from previous iteration // to form 2 aligned 8-bytes chunks to store. // __ andn(end_from, 7, end_from); // Align address __ ldx(end_from, 0, O3); __ align(16); __ BIND(L_loop); __ ldx(end_from, -8, O4); __ deccc(count, count_dec); // Can we do next iteration after this one? __ ldx(end_from, -16, G4); __ dec(end_to, 16); __ dec(end_from, 16); __ srlx(O3, right_shift, O3); __ sllx(O4, left_shift, G3); __ bset(G3, O3); __ stx(O3, end_to, 8); __ srlx(O4, right_shift, O4); __ sllx(G4, left_shift, G3); __ bset(G3, O4); __ stx(O4, end_to, 0); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_loop); __ delayed()->mov(G4, O3); __ inccc(count, count_dec>>1 ); // + 8 bytes __ brx(Assembler::negative, true, Assembler::pn, L_copy_last_bytes); __ delayed()->inc(count, count_dec>>1); // restore 'count' // copy 8 bytes, part of them already loaded in O3 __ ldx(end_from, -8, O4); __ dec(end_to, 8); __ dec(end_from, 8); __ srlx(O3, right_shift, O3); __ sllx(O4, left_shift, G3); __ bset(O3, G3); __ stx(G3, end_to, 0); __ BIND(L_copy_last_bytes); __ srl(left_shift, LogBitsPerByte, left_shift); // misaligned bytes __ br(Assembler::always, false, Assembler::pt, L_copy_bytes); __ delayed()->add(end_from, left_shift, end_from); // restore address } // // Generate stub for disjoint byte copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_disjoint_byte_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); Label L_skip_alignment, L_align; Label L_copy_byte, L_copy_byte_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register offset = O5; // offset from start of arrays // O3, O4, G3, G4 are used as temp registers assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) disjoint_byte_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); // for short arrays, just do single element copy __ cmp(count, 23); // 16 + 7 __ brx(Assembler::less, false, Assembler::pn, L_copy_byte); __ delayed()->mov(G0, offset); if (aligned) { // 'aligned' == true when it is known statically during compilation // of this arraycopy call site that both 'from' and 'to' addresses // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). // // Aligned arrays have 4 bytes alignment in 32-bits VM // and 8 bytes - in 64-bits VM. So we do it only for 32-bits VM // #ifndef _LP64 // copy a 4-bytes word if necessary to align 'to' to 8 bytes __ andcc(to, 7, G0); __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment); __ delayed()->ld(from, 0, O3); __ inc(from, 4); __ inc(to, 4); __ dec(count, 4); __ st(O3, to, -4); __ BIND(L_skip_alignment); #endif } else { // copy bytes to align 'to' on 8 byte boundary __ andcc(to, 7, G1); // misaligned bytes __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->neg(G1); __ inc(G1, 8); // bytes need to copy to next 8-bytes alignment __ sub(count, G1, count); __ BIND(L_align); __ ldub(from, 0, O3); __ deccc(G1); __ inc(from); __ stb(O3, to, 0); __ br(Assembler::notZero, false, Assembler::pt, L_align); __ delayed()->inc(to); __ BIND(L_skip_alignment); } #ifdef _LP64 if (!aligned) #endif { // Copy with shift 16 bytes per iteration if arrays do not have // the same alignment mod 8, otherwise fall through to the next // code for aligned copy. // The compare above (count >= 23) guarantes 'count' >= 16 bytes. // Also jump over aligned copy after the copy with shift completed. copy_16_bytes_forward_with_shift(from, to, count, 16, L_copy_byte); } // Both array are 8 bytes aligned, copy 16 bytes at a time __ and3(count, 7, G4); // Save count __ srl(count, 3, count); generate_disjoint_long_copy_core(aligned); __ mov(G4, count); // Restore count // copy tailing bytes __ BIND(L_copy_byte); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ align(16); __ BIND(L_copy_byte_loop); __ ldub(from, offset, O3); __ deccc(count); __ stb(O3, to, offset); __ brx(Assembler::notZero, false, Assembler::pt, L_copy_byte_loop); __ delayed()->inc(offset); __ BIND(L_exit); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate stub for conjoint byte copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_conjoint_byte_copy(bool aligned, const char * name) { // Do reverse copy. __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); address nooverlap_target = aligned ? StubRoutines::arrayof_jbyte_disjoint_arraycopy() : disjoint_byte_copy_entry; Label L_skip_alignment, L_align, L_aligned_copy; Label L_copy_byte, L_copy_byte_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register end_from = from; // source array end address const Register end_to = to; // destination array end address assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) byte_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); array_overlap_test(nooverlap_target, 0); __ add(to, count, end_to); // offset after last copied element // for short arrays, just do single element copy __ cmp(count, 23); // 16 + 7 __ brx(Assembler::less, false, Assembler::pn, L_copy_byte); __ delayed()->add(from, count, end_from); { // Align end of arrays since they could be not aligned even // when arrays itself are aligned. // copy bytes to align 'end_to' on 8 byte boundary __ andcc(end_to, 7, G1); // misaligned bytes __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->nop(); __ sub(count, G1, count); __ BIND(L_align); __ dec(end_from); __ dec(end_to); __ ldub(end_from, 0, O3); __ deccc(G1); __ brx(Assembler::notZero, false, Assembler::pt, L_align); __ delayed()->stb(O3, end_to, 0); __ BIND(L_skip_alignment); } #ifdef _LP64 if (aligned) { // Both arrays are aligned to 8-bytes in 64-bits VM. // The 'count' is decremented in copy_16_bytes_backward_with_shift() // in unaligned case. __ dec(count, 16); } else #endif { // Copy with shift 16 bytes per iteration if arrays do not have // the same alignment mod 8, otherwise jump to the next // code for aligned copy (and substracting 16 from 'count' before jump). // The compare above (count >= 11) guarantes 'count' >= 16 bytes. // Also jump over aligned copy after the copy with shift completed. copy_16_bytes_backward_with_shift(end_from, end_to, count, 16, L_aligned_copy, L_copy_byte); } // copy 4 elements (16 bytes) at a time __ align(16); __ BIND(L_aligned_copy); __ dec(end_from, 16); __ ldx(end_from, 8, O3); __ ldx(end_from, 0, O4); __ dec(end_to, 16); __ deccc(count, 16); __ stx(O3, end_to, 8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); __ delayed()->stx(O4, end_to, 0); __ inc(count, 16); // copy 1 element (2 bytes) at a time __ BIND(L_copy_byte); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ align(16); __ BIND(L_copy_byte_loop); __ dec(end_from); __ dec(end_to); __ ldub(end_from, 0, O4); __ deccc(count); __ brx(Assembler::greater, false, Assembler::pt, L_copy_byte_loop); __ delayed()->stb(O4, end_to, 0); __ BIND(L_exit); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jbyte_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate stub for disjoint short copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_disjoint_short_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); Label L_skip_alignment, L_skip_alignment2; Label L_copy_2_bytes, L_copy_2_bytes_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register offset = O5; // offset from start of arrays // O3, O4, G3, G4 are used as temp registers assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) disjoint_short_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); // for short arrays, just do single element copy __ cmp(count, 11); // 8 + 3 (22 bytes) __ brx(Assembler::less, false, Assembler::pn, L_copy_2_bytes); __ delayed()->mov(G0, offset); if (aligned) { // 'aligned' == true when it is known statically during compilation // of this arraycopy call site that both 'from' and 'to' addresses // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). // // Aligned arrays have 4 bytes alignment in 32-bits VM // and 8 bytes - in 64-bits VM. // #ifndef _LP64 // copy a 2-elements word if necessary to align 'to' to 8 bytes __ andcc(to, 7, G0); __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->ld(from, 0, O3); __ inc(from, 4); __ inc(to, 4); __ dec(count, 2); __ st(O3, to, -4); __ BIND(L_skip_alignment); #endif } else { // copy 1 element if necessary to align 'to' on an 4 bytes __ andcc(to, 3, G0); __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->lduh(from, 0, O3); __ inc(from, 2); __ inc(to, 2); __ dec(count); __ sth(O3, to, -2); __ BIND(L_skip_alignment); // copy 2 elements to align 'to' on an 8 byte boundary __ andcc(to, 7, G0); __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment2); __ delayed()->lduh(from, 0, O3); __ dec(count, 2); __ lduh(from, 2, O4); __ inc(from, 4); __ inc(to, 4); __ sth(O3, to, -4); __ sth(O4, to, -2); __ BIND(L_skip_alignment2); } #ifdef _LP64 if (!aligned) #endif { // Copy with shift 16 bytes per iteration if arrays do not have // the same alignment mod 8, otherwise fall through to the next // code for aligned copy. // The compare above (count >= 11) guarantes 'count' >= 16 bytes. // Also jump over aligned copy after the copy with shift completed. copy_16_bytes_forward_with_shift(from, to, count, 8, L_copy_2_bytes); } // Both array are 8 bytes aligned, copy 16 bytes at a time __ and3(count, 3, G4); // Save __ srl(count, 2, count); generate_disjoint_long_copy_core(aligned); __ mov(G4, count); // restore // copy 1 element at a time __ BIND(L_copy_2_bytes); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ align(16); __ BIND(L_copy_2_bytes_loop); __ lduh(from, offset, O3); __ deccc(count); __ sth(O3, to, offset); __ brx(Assembler::notZero, false, Assembler::pt, L_copy_2_bytes_loop); __ delayed()->inc(offset, 2); __ BIND(L_exit); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jshort_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate stub for conjoint short copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_conjoint_short_copy(bool aligned, const char * name) { // Do reverse copy. __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); address nooverlap_target = aligned ? StubRoutines::arrayof_jshort_disjoint_arraycopy() : disjoint_short_copy_entry; Label L_skip_alignment, L_skip_alignment2, L_aligned_copy; Label L_copy_2_bytes, L_copy_2_bytes_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register end_from = from; // source array end address const Register end_to = to; // destination array end address const Register byte_count = O3; // bytes count to copy assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) short_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); array_overlap_test(nooverlap_target, 1); __ sllx(count, LogBytesPerShort, byte_count); __ add(to, byte_count, end_to); // offset after last copied element // for short arrays, just do single element copy __ cmp(count, 11); // 8 + 3 (22 bytes) __ brx(Assembler::less, false, Assembler::pn, L_copy_2_bytes); __ delayed()->add(from, byte_count, end_from); { // Align end of arrays since they could be not aligned even // when arrays itself are aligned. // copy 1 element if necessary to align 'end_to' on an 4 bytes __ andcc(end_to, 3, G0); __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->lduh(end_from, -2, O3); __ dec(end_from, 2); __ dec(end_to, 2); __ dec(count); __ sth(O3, end_to, 0); __ BIND(L_skip_alignment); // copy 2 elements to align 'end_to' on an 8 byte boundary __ andcc(end_to, 7, G0); __ br(Assembler::zero, false, Assembler::pn, L_skip_alignment2); __ delayed()->lduh(end_from, -2, O3); __ dec(count, 2); __ lduh(end_from, -4, O4); __ dec(end_from, 4); __ dec(end_to, 4); __ sth(O3, end_to, 2); __ sth(O4, end_to, 0); __ BIND(L_skip_alignment2); } #ifdef _LP64 if (aligned) { // Both arrays are aligned to 8-bytes in 64-bits VM. // The 'count' is decremented in copy_16_bytes_backward_with_shift() // in unaligned case. __ dec(count, 8); } else #endif { // Copy with shift 16 bytes per iteration if arrays do not have // the same alignment mod 8, otherwise jump to the next // code for aligned copy (and substracting 8 from 'count' before jump). // The compare above (count >= 11) guarantes 'count' >= 16 bytes. // Also jump over aligned copy after the copy with shift completed. copy_16_bytes_backward_with_shift(end_from, end_to, count, 8, L_aligned_copy, L_copy_2_bytes); } // copy 4 elements (16 bytes) at a time __ align(16); __ BIND(L_aligned_copy); __ dec(end_from, 16); __ ldx(end_from, 8, O3); __ ldx(end_from, 0, O4); __ dec(end_to, 16); __ deccc(count, 8); __ stx(O3, end_to, 8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); __ delayed()->stx(O4, end_to, 0); __ inc(count, 8); // copy 1 element (2 bytes) at a time __ BIND(L_copy_2_bytes); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ BIND(L_copy_2_bytes_loop); __ dec(end_from, 2); __ dec(end_to, 2); __ lduh(end_from, 0, O4); __ deccc(count); __ brx(Assembler::greater, false, Assembler::pt, L_copy_2_bytes_loop); __ delayed()->sth(O4, end_to, 0); __ BIND(L_exit); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jshort_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate core code for disjoint int copy (and oop copy on 32-bit). // If "aligned" is true, the "from" and "to" addresses are assumed // to be heapword aligned. // // Arguments: // from: O0 // to: O1 // count: O2 treated as signed // void generate_disjoint_int_copy_core(bool aligned) { Label L_skip_alignment, L_aligned_copy; Label L_copy_16_bytes, L_copy_4_bytes, L_copy_4_bytes_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register offset = O5; // offset from start of arrays // O3, O4, G3, G4 are used as temp registers // 'aligned' == true when it is known statically during compilation // of this arraycopy call site that both 'from' and 'to' addresses // are HeapWordSize aligned (see LibraryCallKit::basictype2arraycopy()). // // Aligned arrays have 4 bytes alignment in 32-bits VM // and 8 bytes - in 64-bits VM. // #ifdef _LP64 if (!aligned) #endif { // The next check could be put under 'ifndef' since the code in // generate_disjoint_long_copy_core() has own checks and set 'offset'. // for short arrays, just do single element copy __ cmp(count, 5); // 4 + 1 (20 bytes) __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_4_bytes); __ delayed()->mov(G0, offset); // copy 1 element to align 'to' on an 8 byte boundary __ andcc(to, 7, G0); __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->ld(from, 0, O3); __ inc(from, 4); __ inc(to, 4); __ dec(count); __ st(O3, to, -4); __ BIND(L_skip_alignment); // if arrays have same alignment mod 8, do 4 elements copy __ andcc(from, 7, G0); __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); __ delayed()->ld(from, 0, O3); // // Load 2 aligned 8-bytes chunks and use one from previous iteration // to form 2 aligned 8-bytes chunks to store. // // copy_16_bytes_forward_with_shift() is not used here since this // code is more optimal. // copy with shift 4 elements (16 bytes) at a time __ dec(count, 4); // The cmp at the beginning guaranty count >= 4 __ align(16); __ BIND(L_copy_16_bytes); __ ldx(from, 4, O4); __ deccc(count, 4); // Can we do next iteration after this one? __ ldx(from, 12, G4); __ inc(to, 16); __ inc(from, 16); __ sllx(O3, 32, O3); __ srlx(O4, 32, G3); __ bset(G3, O3); __ stx(O3, to, -16); __ sllx(O4, 32, O4); __ srlx(G4, 32, G3); __ bset(G3, O4); __ stx(O4, to, -8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); __ delayed()->mov(G4, O3); __ br(Assembler::always, false, Assembler::pt, L_copy_4_bytes); __ delayed()->inc(count, 4); // restore 'count' __ BIND(L_aligned_copy); } // copy 4 elements (16 bytes) at a time __ and3(count, 1, G4); // Save __ srl(count, 1, count); generate_disjoint_long_copy_core(aligned); __ mov(G4, count); // Restore // copy 1 element at a time __ BIND(L_copy_4_bytes); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ BIND(L_copy_4_bytes_loop); __ ld(from, offset, O3); __ deccc(count); __ st(O3, to, offset); __ brx(Assembler::notZero, false, Assembler::pt, L_copy_4_bytes_loop); __ delayed()->inc(offset, 4); __ BIND(L_exit); } // // Generate stub for disjoint int copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_disjoint_int_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); const Register count = O2; assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) disjoint_int_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); generate_disjoint_int_copy_core(aligned); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jint_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate core code for conjoint int copy (and oop copy on 32-bit). // If "aligned" is true, the "from" and "to" addresses are assumed // to be heapword aligned. // // Arguments: // from: O0 // to: O1 // count: O2 treated as signed // void generate_conjoint_int_copy_core(bool aligned) { // Do reverse copy. Label L_skip_alignment, L_aligned_copy; Label L_copy_16_bytes, L_copy_4_bytes, L_copy_4_bytes_loop, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register end_from = from; // source array end address const Register end_to = to; // destination array end address // O3, O4, O5, G3 are used as temp registers const Register byte_count = O3; // bytes count to copy __ sllx(count, LogBytesPerInt, byte_count); __ add(to, byte_count, end_to); // offset after last copied element __ cmp(count, 5); // for short arrays, just do single element copy __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_4_bytes); __ delayed()->add(from, byte_count, end_from); // copy 1 element to align 'to' on an 8 byte boundary __ andcc(end_to, 7, G0); __ br(Assembler::zero, false, Assembler::pt, L_skip_alignment); __ delayed()->nop(); __ dec(count); __ dec(end_from, 4); __ dec(end_to, 4); __ ld(end_from, 0, O4); __ st(O4, end_to, 0); __ BIND(L_skip_alignment); // Check if 'end_from' and 'end_to' has the same alignment. __ andcc(end_from, 7, G0); __ br(Assembler::zero, false, Assembler::pt, L_aligned_copy); __ delayed()->dec(count, 4); // The cmp at the start guaranty cnt >= 4 // copy with shift 4 elements (16 bytes) at a time // // Load 2 aligned 8-bytes chunks and use one from previous iteration // to form 2 aligned 8-bytes chunks to store. // __ ldx(end_from, -4, O3); __ align(16); __ BIND(L_copy_16_bytes); __ ldx(end_from, -12, O4); __ deccc(count, 4); __ ldx(end_from, -20, O5); __ dec(end_to, 16); __ dec(end_from, 16); __ srlx(O3, 32, O3); __ sllx(O4, 32, G3); __ bset(G3, O3); __ stx(O3, end_to, 8); __ srlx(O4, 32, O4); __ sllx(O5, 32, G3); __ bset(O4, G3); __ stx(G3, end_to, 0); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); __ delayed()->mov(O5, O3); __ br(Assembler::always, false, Assembler::pt, L_copy_4_bytes); __ delayed()->inc(count, 4); // copy 4 elements (16 bytes) at a time __ align(16); __ BIND(L_aligned_copy); __ dec(end_from, 16); __ ldx(end_from, 8, O3); __ ldx(end_from, 0, O4); __ dec(end_to, 16); __ deccc(count, 4); __ stx(O3, end_to, 8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_aligned_copy); __ delayed()->stx(O4, end_to, 0); __ inc(count, 4); // copy 1 element (4 bytes) at a time __ BIND(L_copy_4_bytes); __ br_zero(Assembler::zero, false, Assembler::pt, count, L_exit); __ delayed()->nop(); __ BIND(L_copy_4_bytes_loop); __ dec(end_from, 4); __ dec(end_to, 4); __ ld(end_from, 0, O4); __ deccc(count); __ brx(Assembler::greater, false, Assembler::pt, L_copy_4_bytes_loop); __ delayed()->st(O4, end_to, 0); __ BIND(L_exit); } // // Generate stub for conjoint int copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_conjoint_int_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); address nooverlap_target = aligned ? StubRoutines::arrayof_jint_disjoint_arraycopy() : disjoint_int_copy_entry; assert_clean_int(O2, O3); // Make sure 'count' is clean int. if (!aligned) int_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); array_overlap_test(nooverlap_target, 2); generate_conjoint_int_copy_core(aligned); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jint_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate core code for disjoint long copy (and oop copy on 64-bit). // "aligned" is ignored, because we must make the stronger // assumption that both addresses are always 64-bit aligned. // // Arguments: // from: O0 // to: O1 // count: O2 treated as signed // void generate_disjoint_long_copy_core(bool aligned) { Label L_copy_8_bytes, L_copy_16_bytes, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register offset0 = O4; // element offset const Register offset8 = O5; // next element offset __ deccc(count, 2); __ mov(G0, offset0); // offset from start of arrays (0) __ brx(Assembler::negative, false, Assembler::pn, L_copy_8_bytes ); __ delayed()->add(offset0, 8, offset8); __ align(16); __ BIND(L_copy_16_bytes); __ ldx(from, offset0, O3); __ ldx(from, offset8, G3); __ deccc(count, 2); __ stx(O3, to, offset0); __ inc(offset0, 16); __ stx(G3, to, offset8); __ brx(Assembler::greaterEqual, false, Assembler::pt, L_copy_16_bytes); __ delayed()->inc(offset8, 16); __ BIND(L_copy_8_bytes); __ inccc(count, 2); __ brx(Assembler::zero, true, Assembler::pn, L_exit ); __ delayed()->mov(offset0, offset8); // Set O5 used by other stubs __ ldx(from, offset0, O3); __ stx(O3, to, offset0); __ BIND(L_exit); } // // Generate stub for disjoint long copy. // "aligned" is ignored, because we must make the stronger // assumption that both addresses are always 64-bit aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_disjoint_long_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); assert_clean_int(O2, O3); // Make sure 'count' is clean int. if (!aligned) disjoint_long_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); generate_disjoint_long_copy_core(aligned); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jlong_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // // Generate core code for conjoint long copy (and oop copy on 64-bit). // "aligned" is ignored, because we must make the stronger // assumption that both addresses are always 64-bit aligned. // // Arguments: // from: O0 // to: O1 // count: O2 treated as signed // void generate_conjoint_long_copy_core(bool aligned) { // Do reverse copy. Label L_copy_8_bytes, L_copy_16_bytes, L_exit; const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count const Register offset8 = O4; // element offset const Register offset0 = O5; // previous element offset __ subcc(count, 1, count); __ brx(Assembler::lessEqual, false, Assembler::pn, L_copy_8_bytes ); __ delayed()->sllx(count, LogBytesPerLong, offset8); __ sub(offset8, 8, offset0); __ align(16); __ BIND(L_copy_16_bytes); __ ldx(from, offset8, O2); __ ldx(from, offset0, O3); __ stx(O2, to, offset8); __ deccc(offset8, 16); // use offset8 as counter __ stx(O3, to, offset0); __ brx(Assembler::greater, false, Assembler::pt, L_copy_16_bytes); __ delayed()->dec(offset0, 16); __ BIND(L_copy_8_bytes); __ brx(Assembler::negative, false, Assembler::pn, L_exit ); __ delayed()->nop(); __ ldx(from, 0, O3); __ stx(O3, to, 0); __ BIND(L_exit); } // Generate stub for conjoint long copy. // "aligned" is ignored, because we must make the stronger // assumption that both addresses are always 64-bit aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_conjoint_long_copy(bool aligned, const char * name) { __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); assert(!aligned, "usage"); address nooverlap_target = disjoint_long_copy_entry; assert_clean_int(O2, O3); // Make sure 'count' is clean int. if (!aligned) long_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from Unsafe.copyMemory) if (!aligned) BLOCK_COMMENT("Entry:"); array_overlap_test(nooverlap_target, 3); generate_conjoint_long_copy_core(aligned); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_jlong_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // Generate stub for disjoint oop copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_disjoint_oop_copy(bool aligned, const char * name) { const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) disjoint_oop_copy_entry = __ pc(); // caller can pass a 64-bit byte count here if (!aligned) BLOCK_COMMENT("Entry:"); // save arguments for barrier generation __ mov(to, G1); __ mov(count, G5); gen_write_ref_array_pre_barrier(G1, G5); #ifdef _LP64 assert_clean_int(count, O3); // Make sure 'count' is clean int. if (UseCompressedOops) { generate_disjoint_int_copy_core(aligned); } else { generate_disjoint_long_copy_core(aligned); } #else generate_disjoint_int_copy_core(aligned); #endif // O0 is used as temp register gen_write_ref_array_post_barrier(G1, G5, O0); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_oop_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // Generate stub for conjoint oop copy. If "aligned" is true, the // "from" and "to" addresses are assumed to be heapword aligned. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // address generate_conjoint_oop_copy(bool aligned, const char * name) { const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); assert_clean_int(count, O3); // Make sure 'count' is clean int. if (!aligned) oop_copy_entry = __ pc(); // caller can pass a 64-bit byte count here if (!aligned) BLOCK_COMMENT("Entry:"); // save arguments for barrier generation __ mov(to, G1); __ mov(count, G5); gen_write_ref_array_pre_barrier(G1, G5); address nooverlap_target = aligned ? StubRoutines::arrayof_oop_disjoint_arraycopy() : disjoint_oop_copy_entry; array_overlap_test(nooverlap_target, LogBytesPerHeapOop); #ifdef _LP64 if (UseCompressedOops) { generate_conjoint_int_copy_core(aligned); } else { generate_conjoint_long_copy_core(aligned); } #else generate_conjoint_int_copy_core(aligned); #endif // O0 is used as temp register gen_write_ref_array_post_barrier(G1, G5, O0); // O3, O4 are used as temp registers inc_counter_np(SharedRuntime::_oop_array_copy_ctr, O3, O4); __ retl(); __ delayed()->mov(G0, O0); // return 0 return start; } // Helper for generating a dynamic type check. // Smashes only the given temp registers. void generate_type_check(Register sub_klass, Register super_check_offset, Register super_klass, Register temp, Label& L_success) { assert_different_registers(sub_klass, super_check_offset, super_klass, temp); BLOCK_COMMENT("type_check:"); Label L_miss, L_pop_to_miss; assert_clean_int(super_check_offset, temp); __ check_klass_subtype_fast_path(sub_klass, super_klass, temp, noreg, &L_success, &L_miss, NULL, super_check_offset); BLOCK_COMMENT("type_check_slow_path:"); __ save_frame(0); __ check_klass_subtype_slow_path(sub_klass->after_save(), super_klass->after_save(), L0, L1, L2, L4, NULL, &L_pop_to_miss); __ ba(false, L_success); __ delayed()->restore(); __ bind(L_pop_to_miss); __ restore(); // Fall through on failure! __ BIND(L_miss); } // Generate stub for checked oop copy. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 treated as signed // ckoff: O3 (super_check_offset) // ckval: O4 (super_klass) // ret: O0 zero for success; (-1^K) where K is partial transfer count // address generate_checkcast_copy(const char* name) { const Register O0_from = O0; // source array address const Register O1_to = O1; // destination array address const Register O2_count = O2; // elements count const Register O3_ckoff = O3; // super_check_offset const Register O4_ckval = O4; // super_klass const Register O5_offset = O5; // loop var, with stride wordSize const Register G1_remain = G1; // loop var, with stride -1 const Register G3_oop = G3; // actual oop copied const Register G4_klass = G4; // oop._klass const Register G5_super = G5; // oop._klass._primary_supers[ckval] __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); gen_write_ref_array_pre_barrier(O1, O2); #ifdef ASSERT // We sometimes save a frame (see generate_type_check below). // If this will cause trouble, let's fail now instead of later. __ save_frame(0); __ restore(); #endif #ifdef ASSERT // caller guarantees that the arrays really are different // otherwise, we would have to make conjoint checks { Label L; __ mov(O3, G1); // spill: overlap test smashes O3 __ mov(O4, G4); // spill: overlap test smashes O4 array_overlap_test(L, LogBytesPerHeapOop); __ stop("checkcast_copy within a single array"); __ bind(L); __ mov(G1, O3); __ mov(G4, O4); } #endif //ASSERT assert_clean_int(O2_count, G1); // Make sure 'count' is clean int. checkcast_copy_entry = __ pc(); // caller can pass a 64-bit byte count here (from generic stub) BLOCK_COMMENT("Entry:"); Label load_element, store_element, do_card_marks, fail, done; __ addcc(O2_count, 0, G1_remain); // initialize loop index, and test it __ brx(Assembler::notZero, false, Assembler::pt, load_element); __ delayed()->mov(G0, O5_offset); // offset from start of arrays // Empty array: Nothing to do. inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr, O3, O4); __ retl(); __ delayed()->set(0, O0); // return 0 on (trivial) success // ======== begin loop ======== // (Loop is rotated; its entry is load_element.) // Loop variables: // (O5 = 0; ; O5 += wordSize) --- offset from src, dest arrays // (O2 = len; O2 != 0; O2--) --- number of oops *remaining* // G3, G4, G5 --- current oop, oop.klass, oop.klass.super __ align(16); __ BIND(store_element); __ deccc(G1_remain); // decrement the count __ store_heap_oop(G3_oop, O1_to, O5_offset); // store the oop __ inc(O5_offset, heapOopSize); // step to next offset __ brx(Assembler::zero, true, Assembler::pt, do_card_marks); __ delayed()->set(0, O0); // return -1 on success // ======== loop entry is here ======== __ BIND(load_element); __ load_heap_oop(O0_from, O5_offset, G3_oop); // load the oop __ br_null(G3_oop, true, Assembler::pt, store_element); __ delayed()->nop(); __ load_klass(G3_oop, G4_klass); // query the object klass generate_type_check(G4_klass, O3_ckoff, O4_ckval, G5_super, // branch to this on success: store_element); // ======== end loop ======== // It was a real error; we must depend on the caller to finish the job. // Register G1 has number of *remaining* oops, O2 number of *total* oops. // Emit GC store barriers for the oops we have copied (O2 minus G1), // and report their number to the caller. __ BIND(fail); __ subcc(O2_count, G1_remain, O2_count); __ brx(Assembler::zero, false, Assembler::pt, done); __ delayed()->not1(O2_count, O0); // report (-1^K) to caller __ BIND(do_card_marks); gen_write_ref_array_post_barrier(O1_to, O2_count, O3); // store check on O1[0..O2] __ BIND(done); inc_counter_np(SharedRuntime::_checkcast_array_copy_ctr, O3, O4); __ retl(); __ delayed()->nop(); // return value in 00 return start; } // Generate 'unsafe' array copy stub // Though just as safe as the other stubs, it takes an unscaled // size_t argument instead of an element count. // // Arguments for generated stub: // from: O0 // to: O1 // count: O2 byte count, treated as ssize_t, can be zero // // Examines the alignment of the operands and dispatches // to a long, int, short, or byte copy loop. // address generate_unsafe_copy(const char* name) { const Register O0_from = O0; // source array address const Register O1_to = O1; // destination array address const Register O2_count = O2; // elements count const Register G1_bits = G1; // test copy of low bits __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); // bump this on entry, not on exit: inc_counter_np(SharedRuntime::_unsafe_array_copy_ctr, G1, G3); __ or3(O0_from, O1_to, G1_bits); __ or3(O2_count, G1_bits, G1_bits); __ btst(BytesPerLong-1, G1_bits); __ br(Assembler::zero, true, Assembler::pt, long_copy_entry, relocInfo::runtime_call_type); // scale the count on the way out: __ delayed()->srax(O2_count, LogBytesPerLong, O2_count); __ btst(BytesPerInt-1, G1_bits); __ br(Assembler::zero, true, Assembler::pt, int_copy_entry, relocInfo::runtime_call_type); // scale the count on the way out: __ delayed()->srax(O2_count, LogBytesPerInt, O2_count); __ btst(BytesPerShort-1, G1_bits); __ br(Assembler::zero, true, Assembler::pt, short_copy_entry, relocInfo::runtime_call_type); // scale the count on the way out: __ delayed()->srax(O2_count, LogBytesPerShort, O2_count); __ br(Assembler::always, false, Assembler::pt, byte_copy_entry, relocInfo::runtime_call_type); __ delayed()->nop(); return start; } // Perform range checks on the proposed arraycopy. // Kills the two temps, but nothing else. // Also, clean the sign bits of src_pos and dst_pos. void arraycopy_range_checks(Register src, // source array oop (O0) Register src_pos, // source position (O1) Register dst, // destination array oo (O2) Register dst_pos, // destination position (O3) Register length, // length of copy (O4) Register temp1, Register temp2, Label& L_failed) { BLOCK_COMMENT("arraycopy_range_checks:"); // if (src_pos + length > arrayOop(src)->length() ) FAIL; const Register array_length = temp1; // scratch const Register end_pos = temp2; // scratch // Note: This next instruction may be in the delay slot of a branch: __ add(length, src_pos, end_pos); // src_pos + length __ lduw(src, arrayOopDesc::length_offset_in_bytes(), array_length); __ cmp(end_pos, array_length); __ br(Assembler::greater, false, Assembler::pn, L_failed); // if (dst_pos + length > arrayOop(dst)->length() ) FAIL; __ delayed()->add(length, dst_pos, end_pos); // dst_pos + length __ lduw(dst, arrayOopDesc::length_offset_in_bytes(), array_length); __ cmp(end_pos, array_length); __ br(Assembler::greater, false, Assembler::pn, L_failed); // Have to clean up high 32-bits of 'src_pos' and 'dst_pos'. // Move with sign extension can be used since they are positive. __ delayed()->signx(src_pos, src_pos); __ signx(dst_pos, dst_pos); BLOCK_COMMENT("arraycopy_range_checks done"); } // // Generate generic array copy stubs // // Input: // O0 - src oop // O1 - src_pos // O2 - dst oop // O3 - dst_pos // O4 - element count // // Output: // O0 == 0 - success // O0 == -1 - need to call System.arraycopy // address generate_generic_copy(const char *name) { Label L_failed, L_objArray; // Input registers const Register src = O0; // source array oop const Register src_pos = O1; // source position const Register dst = O2; // destination array oop const Register dst_pos = O3; // destination position const Register length = O4; // elements count // registers used as temp const Register G3_src_klass = G3; // source array klass const Register G4_dst_klass = G4; // destination array klass const Register G5_lh = G5; // layout handler const Register O5_temp = O5; __ align(CodeEntryAlignment); StubCodeMark mark(this, "StubRoutines", name); address start = __ pc(); // bump this on entry, not on exit: inc_counter_np(SharedRuntime::_generic_array_copy_ctr, G1, G3); // In principle, the int arguments could be dirty. //assert_clean_int(src_pos, G1); //assert_clean_int(dst_pos, G1); //assert_clean_int(length, G1); //----------------------------------------------------------------------- // Assembler stubs will be used for this call to arraycopy // if the following conditions are met: // // (1) src and dst must not be null. // (2) src_pos must not be negative. // (3) dst_pos must not be negative. // (4) length must not be negative. // (5) src klass and dst klass should be the same and not NULL. // (6) src and dst should be arrays. // (7) src_pos + length must not exceed length of src. // (8) dst_pos + length must not exceed length of dst. BLOCK_COMMENT("arraycopy initial argument checks"); // if (src == NULL) return -1; __ br_null(src, false, Assembler::pn, L_failed); // if (src_pos < 0) return -1; __ delayed()->tst(src_pos); __ br(Assembler::negative, false, Assembler::pn, L_failed); __ delayed()->nop(); // if (dst == NULL) return -1; __ br_null(dst, false, Assembler::pn, L_failed); // if (dst_pos < 0) return -1; __ delayed()->tst(dst_pos); __ br(Assembler::negative, false, Assembler::pn, L_failed); // if (length < 0) return -1; __ delayed()->tst(length); __ br(Assembler::negative, false, Assembler::pn, L_failed); BLOCK_COMMENT("arraycopy argument klass checks"); // get src->klass() if (UseCompressedOops) { __ delayed()->nop(); // ??? not good __ load_klass(src, G3_src_klass); } else { __ delayed()->ld_ptr(src, oopDesc::klass_offset_in_bytes(), G3_src_klass); } #ifdef ASSERT // assert(src->klass() != NULL); BLOCK_COMMENT("assert klasses not null"); { Label L_a, L_b; __ br_notnull(G3_src_klass, false, Assembler::pt, L_b); // it is broken if klass is NULL __ delayed()->nop(); __ bind(L_a); __ stop("broken null klass"); __ bind(L_b); __ load_klass(dst, G4_dst_klass); __ br_null(G4_dst_klass, false, Assembler::pn, L_a); // this would be broken also __ delayed()->mov(G0, G4_dst_klass); // scribble the temp BLOCK_COMMENT("assert done"); } #endif // Load layout helper // // |array_tag| | header_size | element_type | |log2_element_size| // 32 30 24 16 8 2 0 // // array_tag: typeArray = 0x3, objArray = 0x2, non-array = 0x0 // int lh_offset = klassOopDesc::header_size() * HeapWordSize + Klass::layout_helper_offset_in_bytes(); // Load 32-bits signed value. Use br() instruction with it to check icc. __ lduw(G3_src_klass, lh_offset, G5_lh); if (UseCompressedOops) { __ load_klass(dst, G4_dst_klass); } // Handle objArrays completely differently... juint objArray_lh = Klass::array_layout_helper(T_OBJECT); __ set(objArray_lh, O5_temp); __ cmp(G5_lh, O5_temp); __ br(Assembler::equal, false, Assembler::pt, L_objArray); if (UseCompressedOops) { __ delayed()->nop(); } else { __ delayed()->ld_ptr(dst, oopDesc::klass_offset_in_bytes(), G4_dst_klass); } // if (src->klass() != dst->klass()) return -1; __ cmp(G3_src_klass, G4_dst_klass); __ brx(Assembler::notEqual, false, Assembler::pn, L_failed); __ delayed()->nop(); // if (!src->is_Array()) return -1; __ cmp(G5_lh, Klass::_lh_neutral_value); // < 0 __ br(Assembler::greaterEqual, false, Assembler::pn, L_failed); // At this point, it is known to be a typeArray (array_tag 0x3). #ifdef ASSERT __ delayed()->nop(); { Label L; jint lh_prim_tag_in_place = (Klass::_lh_array_tag_type_value << Klass::_lh_array_tag_shift); __ set(lh_prim_tag_in_place, O5_temp); __ cmp(G5_lh, O5_temp); __ br(Assembler::greaterEqual, false, Assembler::pt, L); __ delayed()->nop(); __ stop("must be a primitive array"); __ bind(L); } #else __ delayed(); // match next insn to prev branch #endif arraycopy_range_checks(src, src_pos, dst, dst_pos, length, O5_temp, G4_dst_klass, L_failed); // typeArrayKlass // // src_addr = (src + array_header_in_bytes()) + (src_pos << log2elemsize); // dst_addr = (dst + array_header_in_bytes()) + (dst_pos << log2elemsize); // const Register G4_offset = G4_dst_klass; // array offset const Register G3_elsize = G3_src_klass; // log2 element size __ srl(G5_lh, Klass::_lh_header_size_shift, G4_offset); __ and3(G4_offset, Klass::_lh_header_size_mask, G4_offset); // array_offset __ add(src, G4_offset, src); // src array offset __ add(dst, G4_offset, dst); // dst array offset __ and3(G5_lh, Klass::_lh_log2_element_size_mask, G3_elsize); // log2 element size // next registers should be set before the jump to corresponding stub const Register from = O0; // source array address const Register to = O1; // destination array address const Register count = O2; // elements count // 'from', 'to', 'count' registers should be set in this order // since they are the same as 'src', 'src_pos', 'dst'. BLOCK_COMMENT("scale indexes to element size"); __ sll_ptr(src_pos, G3_elsize, src_pos); __ sll_ptr(dst_pos, G3_elsize, dst_pos); __ add(src, src_pos, from); // src_addr __ add(dst, dst_pos, to); // dst_addr BLOCK_COMMENT("choose copy loop based on element size"); __ cmp(G3_elsize, 0); __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jbyte_arraycopy); __ delayed()->signx(length, count); // length __ cmp(G3_elsize, LogBytesPerShort); __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jshort_arraycopy); __ delayed()->signx(length, count); // length __ cmp(G3_elsize, LogBytesPerInt); __ br(Assembler::equal,true,Assembler::pt,StubRoutines::_jint_arraycopy); __ delayed()->signx(length, count); // length #ifdef ASSERT { Label L; __ cmp(G3_elsize, LogBytesPerLong); __ br(Assembler::equal, false, Assembler::pt, L); __ delayed()->nop(); __ stop("must be long copy, but elsize is wrong"); __ bind(L); } #endif __ br(Assembler::always,false,Assembler::pt,StubRoutines::_jlong_arraycopy); __ delayed()->signx(length, count); // length // objArrayKlass __ BIND(L_objArray); // live at this point: G3_src_klass, G4_dst_klass, src[_pos], dst[_pos], length Label L_plain_copy, L_checkcast_copy; // test array classes for subtyping __ cmp(G3_src_klass, G4_dst_klass); // usual case is exact equality __ brx(Assembler::notEqual, true, Assembler::pn, L_checkcast_copy); __ delayed()->lduw(G4_dst_klass, lh_offset, O5_temp); // hoisted from below // Identically typed arrays can be copied without element-wise checks. arraycopy_range_checks(src, src_pos, dst, dst_pos, length, O5_temp, G5_lh, L_failed); __ add(src, arrayOopDesc::base_offset_in_bytes(T_OBJECT), src); //src offset __ add(dst, arrayOopDesc::base_offset_in_bytes(T_OBJECT), dst); //dst offset __ sll_ptr(src_pos, LogBytesPerHeapOop, src_pos); __ sll_ptr(dst_pos, LogBytesPerHeapOop, dst_pos); __ add(src, src_pos, from); // src_addr __ add(dst, dst_pos, to); // dst_addr __ BIND(L_plain_copy); __ br(Assembler::always, false, Assembler::pt,StubRoutines::_oop_arraycopy); __ delayed()->signx(length, count); // length __ BIND(L_checkcast_copy); // live at this point: G3_src_klass, G4_dst_klass { // Before looking at dst.length, make sure dst is also an objArray. // lduw(G4_dst_klass, lh_offset, O5_temp); // hoisted to delay slot __ cmp(G5_lh, O5_temp); __ br(Assembler::notEqual, false, Assembler::pn, L_failed); // It is safe to examine both src.length and dst.length. __ delayed(); // match next insn to prev branch arraycopy_range_checks(src, src_pos, dst, dst_pos, length, O5_temp, G5_lh, L_failed); // Marshal the base address arguments now, freeing registers. __ add(src, arrayOopDesc::base_offset_in_bytes(T_OBJECT), src); //src offset __ add(dst, arrayOopDesc::base_offset_in_bytes(T_OBJECT), dst); //dst offset __ sll_ptr(src_pos, LogBytesPerHeapOop, src_pos); __ sll_ptr(dst_pos, LogBytesPerHeapOop, dst_pos); __ add(src, src_pos, from); // src_addr __ add(dst, dst_pos, to); // dst_addr __ signx(length, count); // length (reloaded) Register sco_temp = O3; // this register is free now assert_different_registers(from, to, count, sco_temp, G4_dst_klass, G3_src_klass); // Generate the type check. int sco_offset = (klassOopDesc::header_size() * HeapWordSize + Klass::super_check_offset_offset_in_bytes()); __ lduw(G4_dst_klass, sco_offset, sco_temp); generate_type_check(G3_src_klass, sco_temp, G4_dst_klass, O5_temp, L_plain_copy); // Fetch destination element klass from the objArrayKlass header. int ek_offset = (klassOopDesc::header_size() * HeapWordSize + objArrayKlass::element_klass_offset_in_bytes()); // the checkcast_copy loop needs two extra arguments: __ ld_ptr(G4_dst_klass, ek_offset, O4); // dest elem klass // lduw(O4, sco_offset, O3); // sco of elem klass __ br(Assembler::always, false, Assembler::pt, checkcast_copy_entry); __ delayed()->lduw(O4, sco_offset, O3); } __ BIND(L_failed); __ retl(); __ delayed()->sub(G0, 1, O0); // return -1 return start; } void generate_arraycopy_stubs() { // Note: the disjoint stubs must be generated first, some of // the conjoint stubs use them. StubRoutines::_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(false, "jbyte_disjoint_arraycopy"); StubRoutines::_jshort_disjoint_arraycopy = generate_disjoint_short_copy(false, "jshort_disjoint_arraycopy"); StubRoutines::_jint_disjoint_arraycopy = generate_disjoint_int_copy(false, "jint_disjoint_arraycopy"); StubRoutines::_jlong_disjoint_arraycopy = generate_disjoint_long_copy(false, "jlong_disjoint_arraycopy"); StubRoutines::_oop_disjoint_arraycopy = generate_disjoint_oop_copy(false, "oop_disjoint_arraycopy"); StubRoutines::_arrayof_jbyte_disjoint_arraycopy = generate_disjoint_byte_copy(true, "arrayof_jbyte_disjoint_arraycopy"); StubRoutines::_arrayof_jshort_disjoint_arraycopy = generate_disjoint_short_copy(true, "arrayof_jshort_disjoint_arraycopy"); StubRoutines::_arrayof_jint_disjoint_arraycopy = generate_disjoint_int_copy(true, "arrayof_jint_disjoint_arraycopy"); StubRoutines::_arrayof_jlong_disjoint_arraycopy = generate_disjoint_long_copy(true, "arrayof_jlong_disjoint_arraycopy"); StubRoutines::_arrayof_oop_disjoint_arraycopy = generate_disjoint_oop_copy(true, "arrayof_oop_disjoint_arraycopy"); StubRoutines::_jbyte_arraycopy = generate_conjoint_byte_copy(false, "jbyte_arraycopy"); StubRoutines::_jshort_arraycopy = generate_conjoint_short_copy(false, "jshort_arraycopy"); StubRoutines::_jint_arraycopy = generate_conjoint_int_copy(false, "jint_arraycopy"); StubRoutines::_jlong_arraycopy = generate_conjoint_long_copy(false, "jlong_arraycopy"); StubRoutines::_oop_arraycopy = generate_conjoint_oop_copy(false, "oop_arraycopy"); StubRoutines::_arrayof_jbyte_arraycopy = generate_conjoint_byte_copy(true, "arrayof_jbyte_arraycopy"); StubRoutines::_arrayof_jshort_arraycopy = generate_conjoint_short_copy(true, "arrayof_jshort_arraycopy"); #ifdef _LP64 // since sizeof(jint) < sizeof(HeapWord), there's a different flavor: StubRoutines::_arrayof_jint_arraycopy = generate_conjoint_int_copy(true, "arrayof_jint_arraycopy"); #else StubRoutines::_arrayof_jint_arraycopy = StubRoutines::_jint_arraycopy; #endif StubRoutines::_arrayof_jlong_arraycopy = StubRoutines::_jlong_arraycopy; StubRoutines::_arrayof_oop_arraycopy = StubRoutines::_oop_arraycopy; StubRoutines::_checkcast_arraycopy = generate_checkcast_copy("checkcast_arraycopy"); StubRoutines::_unsafe_arraycopy = generate_unsafe_copy("unsafe_arraycopy"); StubRoutines::_generic_arraycopy = generate_generic_copy("generic_arraycopy"); } void generate_initial() { // Generates all stubs and initializes the entry points //------------------------------------------------------------------------------------------------------------------------ // entry points that exist in all platforms // Note: This is code that could be shared among different platforms - however the benefit seems to be smaller than // the disadvantage of having a much more complicated generator structure. See also comment in stubRoutines.hpp. StubRoutines::_forward_exception_entry = generate_forward_exception(); StubRoutines::_call_stub_entry = generate_call_stub(StubRoutines::_call_stub_return_address); StubRoutines::_catch_exception_entry = generate_catch_exception(); //------------------------------------------------------------------------------------------------------------------------ // entry points that are platform specific StubRoutines::Sparc::_test_stop_entry = generate_test_stop(); StubRoutines::Sparc::_stop_subroutine_entry = generate_stop_subroutine(); StubRoutines::Sparc::_flush_callers_register_windows_entry = generate_flush_callers_register_windows(); #if !defined(COMPILER2) && !defined(_LP64) StubRoutines::_atomic_xchg_entry = generate_atomic_xchg(); StubRoutines::_atomic_cmpxchg_entry = generate_atomic_cmpxchg(); StubRoutines::_atomic_add_entry = generate_atomic_add(); StubRoutines::_atomic_xchg_ptr_entry = StubRoutines::_atomic_xchg_entry; StubRoutines::_atomic_cmpxchg_ptr_entry = StubRoutines::_atomic_cmpxchg_entry; StubRoutines::_atomic_cmpxchg_long_entry = generate_atomic_cmpxchg_long(); StubRoutines::_atomic_add_ptr_entry = StubRoutines::_atomic_add_entry; #endif // COMPILER2 !=> _LP64 } void generate_all() { // Generates all stubs and initializes the entry points // Generate partial_subtype_check first here since its code depends on // UseZeroBaseCompressedOops which is defined after heap initialization. StubRoutines::Sparc::_partial_subtype_check = generate_partial_subtype_check(); // These entry points require SharedInfo::stack0 to be set up in non-core builds StubRoutines::_throw_AbstractMethodError_entry = generate_throw_exception("AbstractMethodError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_AbstractMethodError), false); StubRoutines::_throw_IncompatibleClassChangeError_entry= generate_throw_exception("IncompatibleClassChangeError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_IncompatibleClassChangeError), false); StubRoutines::_throw_ArithmeticException_entry = generate_throw_exception("ArithmeticException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_ArithmeticException), true); StubRoutines::_throw_NullPointerException_entry = generate_throw_exception("NullPointerException throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException), true); StubRoutines::_throw_NullPointerException_at_call_entry= generate_throw_exception("NullPointerException at call throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_NullPointerException_at_call), false); StubRoutines::_throw_StackOverflowError_entry = generate_throw_exception("StackOverflowError throw_exception", CAST_FROM_FN_PTR(address, SharedRuntime::throw_StackOverflowError), false); StubRoutines::_handler_for_unsafe_access_entry = generate_handler_for_unsafe_access(); // support for verify_oop (must happen after universe_init) StubRoutines::_verify_oop_subroutine_entry = generate_verify_oop_subroutine(); // arraycopy stubs used by compilers generate_arraycopy_stubs(); // Don't initialize the platform math functions since sparc // doesn't have intrinsics for these operations. } public: StubGenerator(CodeBuffer* code, bool all) : StubCodeGenerator(code) { // replace the standard masm with a special one: _masm = new MacroAssembler(code); _stub_count = !all ? 0x100 : 0x200; if (all) { generate_all(); } else { generate_initial(); } // make sure this stub is available for all local calls if (_atomic_add_stub.is_unbound()) { // generate a second time, if necessary (void) generate_atomic_add(); } } private: int _stub_count; void stub_prolog(StubCodeDesc* cdesc) { # ifdef ASSERT // put extra information in the stub code, to make it more readable #ifdef _LP64 // Write the high part of the address // [RGV] Check if there is a dependency on the size of this prolog __ emit_data((intptr_t)cdesc >> 32, relocInfo::none); #endif __ emit_data((intptr_t)cdesc, relocInfo::none); __ emit_data(++_stub_count, relocInfo::none); # endif align(true); } void align(bool at_header = false) { // %%%%% move this constant somewhere else // UltraSPARC cache line size is 8 instructions: const unsigned int icache_line_size = 32; const unsigned int icache_half_line_size = 16; if (at_header) { while ((intptr_t)(__ pc()) % icache_line_size != 0) { __ emit_data(0, relocInfo::none); } } else { while ((intptr_t)(__ pc()) % icache_half_line_size != 0) { __ nop(); } } } }; // end class declaration address StubGenerator::disjoint_byte_copy_entry = NULL; address StubGenerator::disjoint_short_copy_entry = NULL; address StubGenerator::disjoint_int_copy_entry = NULL; address StubGenerator::disjoint_long_copy_entry = NULL; address StubGenerator::disjoint_oop_copy_entry = NULL; address StubGenerator::byte_copy_entry = NULL; address StubGenerator::short_copy_entry = NULL; address StubGenerator::int_copy_entry = NULL; address StubGenerator::long_copy_entry = NULL; address StubGenerator::oop_copy_entry = NULL; address StubGenerator::checkcast_copy_entry = NULL; void StubGenerator_generate(CodeBuffer* code, bool all) { StubGenerator g(code, all); }