Merge

src/cpu/x86/vm/stubGenerator_x86_64.cpp

@@ -279,7 +279,7 @@ class StubGenerator: public StubCodeGenerator {
       __ stmxcsr(mxcsr_save);
       __ movl(rax, mxcsr_save);
       __ andl(rax, MXCSR_MASK);    // Only check control and mask bits
-      ExternalAddress mxcsr_std(StubRoutines::x86::mxcsr_std());
+      ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
       __ cmp32(rax, mxcsr_std);
       __ jcc(Assembler::equal, skip_ldmx);
       __ ldmxcsr(mxcsr_std);
@@ -729,17 +729,18 @@ class StubGenerator: public StubCodeGenerator {
 
     if (CheckJNICalls) {
       Label ok_ret;
+      ExternalAddress mxcsr_std(StubRoutines::addr_mxcsr_std());
       __ push(rax);
       __ subptr(rsp, wordSize);      // allocate a temp location
       __ stmxcsr(mxcsr_save);
       __ movl(rax, mxcsr_save);
       __ andl(rax, MXCSR_MASK);    // Only check control and mask bits
-      __ cmpl(rax, *(int *)(StubRoutines::x86::mxcsr_std()));
+      __ cmp32(rax, mxcsr_std);
       __ jcc(Assembler::equal, ok_ret);
 
       __ warn("MXCSR changed by native JNI code, use -XX:+RestoreMXCSROnJNICall");
 
-      __ ldmxcsr(ExternalAddress(StubRoutines::x86::mxcsr_std()));
+      __ ldmxcsr(mxcsr_std);
 
       __ bind(ok_ret);
       __ addptr(rsp, wordSize);
@@ -3767,12 +3768,35 @@ class StubGenerator: public StubCodeGenerator {
     return stub->entry_point();
   }
 
+  void create_control_words() {
+    // Round to nearest, 53-bit mode, exceptions masked
+    StubRoutines::_fpu_cntrl_wrd_std   = 0x027F;
+    // Round to zero, 53-bit mode, exception mased
+    StubRoutines::_fpu_cntrl_wrd_trunc = 0x0D7F;
+    // Round to nearest, 24-bit mode, exceptions masked
+    StubRoutines::_fpu_cntrl_wrd_24    = 0x007F;
+    // Round to nearest, 64-bit mode, exceptions masked
+    StubRoutines::_fpu_cntrl_wrd_64    = 0x037F;
+    // Round to nearest, 64-bit mode, exceptions masked
+    StubRoutines::_mxcsr_std           = 0x1F80;
+    // Note: the following two constants are 80-bit values
+    //       layout is critical for correct loading by FPU.
+    // Bias for strict fp multiply/divide
+    StubRoutines::_fpu_subnormal_bias1[0]= 0x00000000; // 2^(-15360) == 0x03ff 8000 0000 0000 0000
+    StubRoutines::_fpu_subnormal_bias1[1]= 0x80000000;
+    StubRoutines::_fpu_subnormal_bias1[2]= 0x03ff;
+    // Un-Bias for strict fp multiply/divide
+    StubRoutines::_fpu_subnormal_bias2[0]= 0x00000000; // 2^(+15360) == 0x7bff 8000 0000 0000 0000
+    StubRoutines::_fpu_subnormal_bias2[1]= 0x80000000;
+    StubRoutines::_fpu_subnormal_bias2[2]= 0x7bff;
+  }
+
   // Initialization
   void generate_initial() {
     // Generates all stubs and initializes the entry points
 
-    // This platform-specific stub is needed by generate_call_stub()
-    StubRoutines::x86::_mxcsr_std        = generate_fp_mask("mxcsr_std",        0x0000000000001F80);
+    // This platform-specific settings are needed by generate_call_stub()
+    create_control_words();
 
     // entry points that exist in all platforms Note: This is code
     // that could be shared among different platforms - however the

src/cpu/x86/vm/stubRoutines_x86_64.cpp

@@ -42,4 +42,3 @@ address StubRoutines::x86::_float_sign_mask = NULL;
 address StubRoutines::x86::_float_sign_flip = NULL;
 address StubRoutines::x86::_double_sign_mask = NULL;
 address StubRoutines::x86::_double_sign_flip = NULL;
-address StubRoutines::x86::_mxcsr_std = NULL;

src/cpu/x86/vm/stubRoutines_x86_64.hpp

@@ -52,7 +52,6 @@ class x86 {
   static address _float_sign_flip;
   static address _double_sign_mask;
   static address _double_sign_flip;
-  static address _mxcsr_std;
 
  public:
 
@@ -106,11 +105,6 @@ class x86 {
     return _double_sign_flip;
   }
 
-  static address mxcsr_std()
-  {
-    return _mxcsr_std;
-  }
-
 # include "stubRoutines_x86.hpp"
 
 };

src/share/vm/ci/bcEscapeAnalyzer.cpp

@@ -138,6 +138,16 @@ bool BCEscapeAnalyzer::is_arg_stack(ArgumentMap vars){
   return false;
 }
 
+// return true if all argument elements of vars are returned
+bool BCEscapeAnalyzer::returns_all(ArgumentMap vars) {
+  for (int i = 0; i < _arg_size; i++) {
+    if (vars.contains(i) && !_arg_returned.test(i)) {
+      return false;
+    }
+  }
+  return true;
+}
+
 void BCEscapeAnalyzer::clear_bits(ArgumentMap vars, VectorSet &bm) {
   for (int i = 0; i < _arg_size; i++) {
     if (vars.contains(i)) {
@@ -166,6 +176,11 @@ void BCEscapeAnalyzer::set_global_escape(ArgumentMap vars, bool merge) {
     if (vars.contains_unknown() || vars.contains_vars()) {
       _return_allocated = false;
     }
+    if (_return_local && vars.contains_vars() && !returns_all(vars)) {
+      // Return result should be invalidated if args in new
+      // state are not recorded in return state.
+      _return_local = false;
+    }
   }
 }
 

src/share/vm/ci/bcEscapeAnalyzer.hpp

@@ -80,6 +80,7 @@ class BCEscapeAnalyzer : public ResourceObj {
   void set_returned(ArgumentMap vars);
   bool is_argument(ArgumentMap vars);
   bool is_arg_stack(ArgumentMap vars);
+  bool returns_all(ArgumentMap vars);
   void clear_bits(ArgumentMap vars, VectorSet &bs);
   void set_method_escape(ArgumentMap vars);
   void set_global_escape(ArgumentMap vars, bool merge = false);

src/share/vm/opto/matcher.cpp

@@ -2305,26 +2305,26 @@ void Matcher::validate_null_checks( ) {
 // atomic instruction acting as a store_load barrier without any
 // intervening volatile load, and thus we don't need a barrier here.
 // We retain the Node to act as a compiler ordering barrier.
-bool Matcher::post_store_load_barrier(const Node *vmb) {
-  Compile *C = Compile::current();
-  assert( vmb->is_MemBar(), "" );
-  assert( vmb->Opcode() != Op_MemBarAcquire, "" );
-  const MemBarNode *mem = (const MemBarNode*)vmb;
-
-  // Get the Proj node, ctrl, that can be used to iterate forward
-  Node *ctrl = NULL;
-  DUIterator_Fast imax, i = mem->fast_outs(imax);
-  while( true ) {
-    ctrl = mem->fast_out(i);            // Throw out-of-bounds if proj not found
-    assert( ctrl->is_Proj(), "only projections here" );
-    ProjNode *proj = (ProjNode*)ctrl;
-    if( proj->_con == TypeFunc::Control &&
-        !C->node_arena()->contains(ctrl) ) // Unmatched old-space only
+bool Matcher::post_store_load_barrier(const Node* vmb) {
+  Compile* C = Compile::current();
+  assert(vmb->is_MemBar(), "");
+  assert(vmb->Opcode() != Op_MemBarAcquire, "");
+  const MemBarNode* membar = vmb->as_MemBar();
+
+  // Get the Ideal Proj node, ctrl, that can be used to iterate forward
+  Node* ctrl = NULL;
+  for (DUIterator_Fast imax, i = membar->fast_outs(imax); i < imax; i++) {
+    Node* p = membar->fast_out(i);
+    assert(p->is_Proj(), "only projections here");
+    if ((p->as_Proj()->_con == TypeFunc::Control) &&
+        !C->node_arena()->contains(p)) { // Unmatched old-space only
+      ctrl = p;
       break;
-    i++;
     }
+  }
+  assert((ctrl != NULL), "missing control projection");
 
-  for( DUIterator_Fast jmax, j = ctrl->fast_outs(jmax); j < jmax; j++ ) {
+  for (DUIterator_Fast jmax, j = ctrl->fast_outs(jmax); j < jmax; j++) {
     Node *x = ctrl->fast_out(j);
     int xop = x->Opcode();
 
@@ -2336,38 +2336,37 @@ bool Matcher::post_store_load_barrier(const Node *vmb) {
     // that a monitor exit operation contains a serializing instruction.
 
     if (xop == Op_MemBarVolatile ||
-        xop == Op_FastLock ||
         xop == Op_CompareAndSwapL ||
         xop == Op_CompareAndSwapP ||
         xop == Op_CompareAndSwapN ||
-        xop == Op_CompareAndSwapI)
+        xop == Op_CompareAndSwapI) {
       return true;
+    }
+
+    // Op_FastLock previously appeared in the Op_* list above.
+    // With biased locking we're no longer guaranteed that a monitor
+    // enter operation contains a serializing instruction.
+    if ((xop == Op_FastLock) && !UseBiasedLocking) {
+      return true;
+    }
 
     if (x->is_MemBar()) {
       // We must retain this membar if there is an upcoming volatile
-      // load, which will be preceded by acquire membar.
-      if (xop == Op_MemBarAcquire)
+      // load, which will be followed by acquire membar.
+      if (xop == Op_MemBarAcquire) {
         return false;
+      } else {
         // For other kinds of barriers, check by pretending we
         // are them, and seeing if we can be removed.
-      else
-        return post_store_load_barrier((const MemBarNode*)x);
+        return post_store_load_barrier(x->as_MemBar());
       }
-
-    // Delicate code to detect case of an upcoming fastlock block
-    if( x->is_If() && x->req() > 1 &&
-        !C->node_arena()->contains(x) ) { // Unmatched old-space only
-      Node *iff = x;
-      Node *bol = iff->in(1);
-      // The iff might be some random subclass of If or bol might be Con-Top
-      if (!bol->is_Bool())  return false;
-      assert( bol->req() > 1, "" );
-      return (bol->in(1)->Opcode() == Op_FastUnlock);
     }
+
     // probably not necessary to check for these
-    if (x->is_Call() || x->is_SafePoint() || x->is_block_proj())
+    if (x->is_Call() || x->is_SafePoint() || x->is_block_proj()) {
       return false;
     }
+  }
   return false;
 }
 

src/share/vm/opto/parse3.cpp

@@ -294,25 +294,7 @@ void Parse::do_put_xxx(Node* obj, ciField* field, bool is_field) {
   // If reference is volatile, prevent following volatiles ops from
   // floating up before the volatile write.
   if (is_vol) {
-    // First place the specific membar for THIS volatile index. This first
-    // membar is dependent on the store, keeping any other membars generated
-    // below from floating up past the store.
-    int adr_idx = C->get_alias_index(adr_type);
-    insert_mem_bar_volatile(Op_MemBarVolatile, adr_idx, store);
-
-    // Now place a membar for AliasIdxBot for the unknown yet-to-be-parsed
-    // volatile alias indices. Skip this if the membar is redundant.
-    if (adr_idx != Compile::AliasIdxBot) {
-      insert_mem_bar_volatile(Op_MemBarVolatile, Compile::AliasIdxBot, store);
-    }
-
-    // Finally, place alias-index-specific membars for each volatile index
-    // that isn't the adr_idx membar. Typically there's only 1 or 2.
-    for( int i = Compile::AliasIdxRaw; i < C->num_alias_types(); i++ ) {
-      if (i != adr_idx && C->alias_type(i)->is_volatile()) {
-        insert_mem_bar_volatile(Op_MemBarVolatile, i, store);
-      }
-    }
+    insert_mem_bar(Op_MemBarVolatile); // Use fat membar
   }
 
   // If the field is final, the rules of Java say we are in <init> or <clinit>.

test/compiler/EscapeAnalysis/Test8020215.java

+/*
+ * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/*
+ * @test
+ * @bug 8020215
+ * @summary Different execution plan when using JIT vs interpreter
+ * @run main Test8020215
+ */
+
+import java.util.ArrayList;
+import java.util.List;
+
+public class Test8020215 {
+    public static class NamedObject {
+        public int id;
+        public String name;
+        public NamedObject(int id, String name) {
+            this.id = id;
+            this.name = name;
+        }
+    }
+
+    public static class NamedObjectList {
+        public List<NamedObject> namedObjectList = new ArrayList<NamedObject>();
+
+        public NamedObject getBest(int id) {
+            NamedObject bestObject = null;
+            for (NamedObject o : namedObjectList) {
+                bestObject = id==o.id ? getBetter(bestObject, o) : bestObject;
+            }
+            return (bestObject != null) ? bestObject : null;
+        }
+
+        private static NamedObject getBetter(NamedObject p1, NamedObject p2) {
+            return (p1 == null) ? p2 : (p2 == null) ? p1 : (p2.name.compareTo(p1.name) >= 0) ? p2 : p1;
+        }
+    }
+
+    static void test(NamedObjectList b, int i) {
+        NamedObject x = b.getBest(2);
+        // test
+        if (x == null) {
+            throw new RuntimeException("x should never be null here! (i=" + i + ")");
+        }
+    }
+
+    public static void main(String[] args) {
+        // setup
+        NamedObjectList b = new NamedObjectList();
+        for (int i = 0; i < 10000; i++) {
+            b.namedObjectList.add(new NamedObject(1, "2012-12-31"));
+        }
+        b.namedObjectList.add(new NamedObject(2, "2013-12-31"));
+
+        // execution
+        for (int i = 0; i < 12000; i++) {
+            test(b, i);
+        }
+        System.out.println("PASSED");
+    }
+}

test/compiler/cpuflags/RestoreMXCSR.java

+/*
+ * Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/*
+ * @test
+ * @bug 8020433
+ * @summary Crash when using -XX:+RestoreMXCSROnJNICalls
+ * @library /testlibrary
+ *
+ */
+import com.oracle.java.testlibrary.*;
+
+public class RestoreMXCSR {
+  public static void main(String[] args) throws Exception {
+    ProcessBuilder pb;
+    OutputAnalyzer out;
+
+    pb = ProcessTools.createJavaProcessBuilder("-XX:+RestoreMXCSROnJNICalls", "-version");
+    out = new OutputAnalyzer(pb.start());
+    out.shouldHaveExitValue(0);
+  }
+}

test/compiler/membars/DekkerTest.java

+/*
+ * Copyright 2013 SAP AG.  All Rights Reserved.
+ * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 only, as
+ * published by the Free Software Foundation.
+ *
+ * This code is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * version 2 for more details (a copy is included in the LICENSE file that
+ * accompanied this code).
+ *
+ * You should have received a copy of the GNU General Public License version
+ * 2 along with this work; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Please contact Oracle, 500 Oracle Parkway, Redwood Shores, CA 94065 USA
+ * or visit www.oracle.com if you need additional information or have any
+ * questions.
+ */
+
+/**
+ * @test
+ * @bug 8007898
+ * @summary Incorrect optimization of Memory Barriers in Matcher::post_store_load_barrier().
+ * @run main/othervm -Xbatch -XX:+IgnoreUnrecognizedVMOptions -XX:CICompilerCount=1 -XX:+StressGCM -XX:+StressLCM DekkerTest
+ * @run main/othervm -Xbatch -XX:+IgnoreUnrecognizedVMOptions -XX:CICompilerCount=1 -XX:+StressGCM -XX:+StressLCM DekkerTest
+ * @run main/othervm -Xbatch -XX:+IgnoreUnrecognizedVMOptions -XX:CICompilerCount=1 -XX:+StressGCM -XX:+StressLCM DekkerTest
+ * @author Martin Doerr martin DOT doerr AT sap DOT com
+ *
+ * Run 3 times since the failure is intermittent.
+ */
+
+public class DekkerTest {
+
+    /*
+      Read After Write Test (basically a simple Dekker test with volatile variables)
+      Derived from the original jcstress test, available at:
+        http://hg.openjdk.java.net/code-tools/jcstress/file/6c339a5aa00d/
+        tests-custom/src/main/java/org/openjdk/jcstress/tests/volatiles/DekkerTest.java
+     */
+
+    static final int ITERATIONS = 1000000;
+
+    static class TestData {
+        public volatile int a;
+        public volatile int b;
+    }
+
+    static class ResultData {
+        public int a;
+        public int b;
+    }
+
+    TestData[]   testDataArray;
+    ResultData[] results;
+
+    volatile boolean start;
+
+    public DekkerTest() {
+        testDataArray = new TestData[ITERATIONS];
+        results = new ResultData[ITERATIONS];
+        for (int i = 0; i < ITERATIONS; ++i) {
+            testDataArray[i] = new TestData();
+            results[i] = new ResultData();
+        }
+        start = false;
+    }
+
+    public void reset() {
+        for (int i = 0; i < ITERATIONS; ++i) {
+            testDataArray[i].a = 0;
+            testDataArray[i].b = 0;
+            results[i].a = 0;
+            results[i].b = 0;
+        }
+        start = false;
+    }
+
+    int actor1(TestData t) {
+        t.a = 1;
+        return t.b;
+    }
+
+    int actor2(TestData t) {
+        t.b = 1;
+        return t.a;
+    }
+
+    class Runner1 extends Thread {
+        public void run() {
+            do {} while (!start);
+            for (int i = 0; i < ITERATIONS; ++i) {
+                results[i].a = actor1(testDataArray[i]);
+            }
+        }
+    }
+
+    class Runner2 extends Thread {
+        public void run() {
+            do {} while (!start);
+            for (int i = 0; i < ITERATIONS; ++i) {
+                results[i].b = actor2(testDataArray[i]);
+            }
+        }
+    }
+
+    void testRunner() {
+        Thread thread1 = new Runner1();
+        Thread thread2 = new Runner2();
+        thread1.start();
+        thread2.start();
+        do {} while (!thread1.isAlive());
+        do {} while (!thread2.isAlive());
+        start = true;
+        Thread.yield();
+        try {
+            thread1.join();
+            thread2.join();
+        } catch (InterruptedException e) {
+            System.out.println("interrupted!");
+            System.exit(1);
+        }
+    }
+
+    boolean printResult() {
+        int[] count = new int[4];
+        for (int i = 0; i < ITERATIONS; ++i) {
+            int event_kind = (results[i].a << 1) + results[i].b;
+            ++count[event_kind];
+        }
+        if (count[0] == 0 && count[3] == 0) {
+            System.out.println("[not interesting]");
+            return false; // not interesting
+        }
+        String error = (count[0] == 0) ? " ok" : " disallowed!";
+        System.out.println("[0,0] " + count[0] + error);
+        System.out.println("[0,1] " + count[1]);
+        System.out.println("[1,0] " + count[2]);
+        System.out.println("[1,1] " + count[3]);
+        return (count[0] != 0);
+    }
+
+    public static void main(String args[]) {
+        DekkerTest test = new DekkerTest();
+        final int runs = 30;
+        int failed = 0;
+        for (int c = 0; c < runs; ++c) {
+            test.testRunner();
+            if (test.printResult()) {
+                failed++;
+            }
+            test.reset();
+        }
+        if (failed > 0) {
+            throw new InternalError("FAILED. Got " + failed + " failed ITERATIONS");
+        }
+        System.out.println("PASSED.");
+    }
+
+}