Merge

src/share/vm/gc_implementation/g1/concurrentMark.cpp

@@ -297,6 +297,11 @@ void CMRegionStack::push(MemRegion mr) {
   }
 }
 
+// Currently we do not call this at all. Normally we would call it
+// during the concurrent marking / remark phases but we now call
+// the lock-based version instead. But we might want to resurrect this
+// code in the future. So, we'll leave it here commented out.
+#if 0
 MemRegion CMRegionStack::pop() {
   while (true) {
     // Otherwise...
@@ -321,6 +326,41 @@ MemRegion CMRegionStack::pop() {
     // Otherwise, we need to try again.
   }
 }
+#endif // 0
+
+void CMRegionStack::push_with_lock(MemRegion mr) {
+  assert(mr.word_size() > 0, "Precondition");
+  MutexLockerEx x(CMRegionStack_lock, Mutex::_no_safepoint_check_flag);
+
+  if (isFull()) {
+    _overflow = true;
+    return;
+  }
+
+  _base[_index] = mr;
+  _index += 1;
+}
+
+MemRegion CMRegionStack::pop_with_lock() {
+  MutexLockerEx x(CMRegionStack_lock, Mutex::_no_safepoint_check_flag);
+
+  while (true) {
+    if (_index == 0) {
+      return MemRegion();
+    }
+    _index -= 1;
+
+    MemRegion mr = _base[_index];
+    if (mr.start() != NULL) {
+      assert(mr.end() != NULL, "invariant");
+      assert(mr.word_size() > 0, "invariant");
+      return mr;
+    } else {
+      // that entry was invalidated... let's skip it
+      assert(mr.end() == NULL, "invariant");
+    }
+  }
+}
 
 bool CMRegionStack::invalidate_entries_into_cset() {
   bool result = false;
@@ -668,7 +708,18 @@ ConcurrentMark::~ConcurrentMark() {
 //
 
 void ConcurrentMark::clearNextBitmap() {
-   guarantee(!G1CollectedHeap::heap()->mark_in_progress(), "Precondition.");
+  G1CollectedHeap* g1h = G1CollectedHeap::heap();
+  G1CollectorPolicy* g1p = g1h->g1_policy();
+
+  // Make sure that the concurrent mark thread looks to still be in
+  // the current cycle.
+  guarantee(cmThread()->during_cycle(), "invariant");
+
+  // We are finishing up the current cycle by clearing the next
+  // marking bitmap and getting it ready for the next cycle. During
+  // this time no other cycle can start. So, let's make sure that this
+  // is the case.
+  guarantee(!g1h->mark_in_progress(), "invariant");
 
   // clear the mark bitmap (no grey objects to start with).
   // We need to do this in chunks and offer to yield in between
@@ -685,7 +736,18 @@ void ConcurrentMark::clearNextBitmap() {
     _nextMarkBitMap->clearRange(mr);
     cur = next;
     do_yield_check();
+
+    // Repeat the asserts from above. We'll do them as asserts here to
+    // minimize their overhead on the product. However, we'll have
+    // them as guarantees at the beginning / end of the bitmap
+    // clearing to get some checking in the product.
+    assert(cmThread()->during_cycle(), "invariant");
+    assert(!g1h->mark_in_progress(), "invariant");
   }
+
+  // Repeat the asserts from above.
+  guarantee(cmThread()->during_cycle(), "invariant");
+  guarantee(!g1h->mark_in_progress(), "invariant");
 }
 
 class NoteStartOfMarkHRClosure: public HeapRegionClosure {
@@ -3363,7 +3425,7 @@ void CMTask::drain_region_stack(BitMapClosure* bc) {
       gclog_or_tty->print_cr("[%d] draining region stack, size = %d",
                              _task_id, _cm->region_stack_size());
 
-    MemRegion mr = _cm->region_stack_pop();
+    MemRegion mr = _cm->region_stack_pop_with_lock();
     // it returns MemRegion() if the pop fails
     statsOnly(if (mr.start() != NULL) ++_region_stack_pops );
 
@@ -3384,7 +3446,7 @@ void CMTask::drain_region_stack(BitMapClosure* bc) {
         if (has_aborted())
           mr = MemRegion();
         else {
-          mr = _cm->region_stack_pop();
+          mr = _cm->region_stack_pop_with_lock();
           // it returns MemRegion() if the pop fails
           statsOnly(if (mr.start() != NULL) ++_region_stack_pops );
         }
@@ -3417,7 +3479,7 @@ void CMTask::drain_region_stack(BitMapClosure* bc) {
           }
           // Now push the part of the region we didn't scan on the
           // region stack to make sure a task scans it later.
-          _cm->region_stack_push(newRegion);
+          _cm->region_stack_push_with_lock(newRegion);
         }
         // break from while
         mr = MemRegion();

src/share/vm/gc_implementation/g1/concurrentMark.hpp

@@ -252,9 +252,19 @@ public:
   // with other "push" operations (no pops).
   void push(MemRegion mr);
 
+#if 0
+  // This is currently not used. See the comment in the .cpp file.
+
   // Lock-free; assumes that it will only be called in parallel
   // with other "pop" operations (no pushes).
   MemRegion pop();
+#endif // 0
+
+  // These two are the implementations that use a lock. They can be
+  // called concurrently with each other but they should not be called
+  // concurrently with the lock-free versions (push() / pop()).
+  void push_with_lock(MemRegion mr);
+  MemRegion pop_with_lock();
 
   bool isEmpty()    { return _index == 0; }
   bool isFull()     { return _index == _capacity; }
@@ -540,6 +550,10 @@ public:
 
   // Manipulation of the region stack
   bool region_stack_push(MemRegion mr) {
+    // Currently we only call the lock-free version during evacuation
+    // pauses.
+    assert(SafepointSynchronize::is_at_safepoint(), "world should be stopped");
+
     _regionStack.push(mr);
     if (_regionStack.overflow()) {
       set_has_overflown();
@@ -547,7 +561,33 @@ public:
     }
     return true;
   }
+#if 0
+  // Currently this is not used. See the comment in the .cpp file.
   MemRegion region_stack_pop() { return _regionStack.pop(); }
+#endif // 0
+
+  bool region_stack_push_with_lock(MemRegion mr) {
+    // Currently we only call the lock-based version during either
+    // concurrent marking or remark.
+    assert(!SafepointSynchronize::is_at_safepoint() || !concurrent(),
+           "if we are at a safepoint it should be the remark safepoint");
+
+    _regionStack.push_with_lock(mr);
+    if (_regionStack.overflow()) {
+      set_has_overflown();
+      return false;
+    }
+    return true;
+  }
+  MemRegion region_stack_pop_with_lock() {
+    // Currently we only call the lock-based version during either
+    // concurrent marking or remark.
+    assert(!SafepointSynchronize::is_at_safepoint() || !concurrent(),
+           "if we are at a safepoint it should be the remark safepoint");
+
+    return _regionStack.pop_with_lock();
+  }
+
   int region_stack_size()               { return _regionStack.size(); }
   bool region_stack_overflow()          { return _regionStack.overflow(); }
   bool region_stack_empty()             { return _regionStack.isEmpty(); }

src/share/vm/gc_implementation/g1/concurrentMarkThread.hpp

@@ -42,8 +42,8 @@ class ConcurrentMarkThread: public ConcurrentGCThread {
 
  private:
   ConcurrentMark*                  _cm;
-  bool                             _started;
-  bool                             _in_progress;
+  volatile bool                    _started;
+  volatile bool                    _in_progress;
 
   void sleepBeforeNextCycle();
 
@@ -77,6 +77,16 @@ class ConcurrentMarkThread: public ConcurrentGCThread {
   void clear_in_progress() { _in_progress = false; }
   bool in_progress()       { return _in_progress;  }
 
+  // This flag returns true from the moment a marking cycle is
+  // initiated (during the initial-mark pause when started() is set)
+  // to the moment when the cycle completes (just after the next
+  // marking bitmap has been cleared and in_progress() is
+  // cleared). While this flag is true we will not start another cycle
+  // so that cycles do not overlap. We cannot use just in_progress()
+  // as the CM thread might take some time to wake up before noticing
+  // that started() is set and set in_progress().
+  bool during_cycle()      { return started() || in_progress(); }
+
   // Yield for GC
   void            yield();
 

src/share/vm/gc_implementation/g1/g1CollectedHeap.cpp

@@ -902,6 +902,10 @@ public:
 
 void G1CollectedHeap::do_collection(bool full, bool clear_all_soft_refs,
                                     size_t word_size) {
+  if (GC_locker::check_active_before_gc()) {
+    return; // GC is disabled (e.g. JNI GetXXXCritical operation)
+  }
+
   ResourceMark rm;
 
   if (PrintHeapAtGC) {
@@ -916,10 +920,6 @@ void G1CollectedHeap::do_collection(bool full, bool clear_all_soft_refs,
   assert(SafepointSynchronize::is_at_safepoint(), "should be at safepoint");
   assert(Thread::current() == VMThread::vm_thread(), "should be in vm thread");
 
-  if (GC_locker::is_active()) {
-    return; // GC is disabled (e.g. JNI GetXXXCritical operation)
-  }
-
   {
     IsGCActiveMark x;
 
@@ -2658,6 +2658,10 @@ struct PrepareForRSScanningClosure : public HeapRegionClosure {
 
 void
 G1CollectedHeap::do_collection_pause_at_safepoint() {
+  if (GC_locker::check_active_before_gc()) {
+    return; // GC is disabled (e.g. JNI GetXXXCritical operation)
+  }
+
   if (PrintHeapAtGC) {
     Universe::print_heap_before_gc();
   }
@@ -2665,6 +2669,11 @@ G1CollectedHeap::do_collection_pause_at_safepoint() {
   {
     ResourceMark rm;
 
+    // This call will decide whether this pause is an initial-mark
+    // pause. If it is, during_initial_mark_pause() will return true
+    // for the duration of this pause.
+    g1_policy()->decide_on_conc_mark_initiation();
+
     char verbose_str[128];
     sprintf(verbose_str, "GC pause ");
     if (g1_policy()->in_young_gc_mode()) {
@@ -2673,7 +2682,7 @@ G1CollectedHeap::do_collection_pause_at_safepoint() {
       else
         strcat(verbose_str, "(partial)");
     }
-    if (g1_policy()->should_initiate_conc_mark())
+    if (g1_policy()->during_initial_mark_pause())
       strcat(verbose_str, " (initial-mark)");
 
     // if PrintGCDetails is on, we'll print long statistics information
@@ -2697,10 +2706,6 @@ G1CollectedHeap::do_collection_pause_at_safepoint() {
              "young list should be well formed");
     }
 
-    if (GC_locker::is_active()) {
-      return; // GC is disabled (e.g. JNI GetXXXCritical operation)
-    }
-
     bool abandoned = false;
     { // Call to jvmpi::post_class_unload_events must occur outside of active GC
       IsGCActiveMark x;
@@ -2756,7 +2761,7 @@ G1CollectedHeap::do_collection_pause_at_safepoint() {
       _young_list->print();
 #endif // SCAN_ONLY_VERBOSE
 
-      if (g1_policy()->should_initiate_conc_mark()) {
+      if (g1_policy()->during_initial_mark_pause()) {
         concurrent_mark()->checkpointRootsInitialPre();
       }
       save_marks();
@@ -2858,7 +2863,7 @@ G1CollectedHeap::do_collection_pause_at_safepoint() {
       }
 
       if (g1_policy()->in_young_gc_mode() &&
-          g1_policy()->should_initiate_conc_mark()) {
+          g1_policy()->during_initial_mark_pause()) {
         concurrent_mark()->checkpointRootsInitialPost();
         set_marking_started();
         // CAUTION: after the doConcurrentMark() call below,
@@ -2937,6 +2942,9 @@ void G1CollectedHeap::set_gc_alloc_region(int purpose, HeapRegion* r) {
   // the same region
   assert(r == NULL || !r->is_gc_alloc_region(),
          "shouldn't already be a GC alloc region");
+  assert(r == NULL || !r->isHumongous(),
+         "humongous regions shouldn't be used as GC alloc regions");
+
   HeapWord* original_top = NULL;
   if (r != NULL)
     original_top = r->top();
@@ -3079,12 +3087,17 @@ void G1CollectedHeap::get_gc_alloc_regions() {
 
       if (alloc_region->in_collection_set() ||
           alloc_region->top() == alloc_region->end() ||
-          alloc_region->top() == alloc_region->bottom()) {
-        // we will discard the current GC alloc region if it's in the
-        // collection set (it can happen!), if it's already full (no
-        // point in using it), or if it's empty (this means that it
-        // was emptied during a cleanup and it should be on the free
-        // list now).
+          alloc_region->top() == alloc_region->bottom() ||
+          alloc_region->isHumongous()) {
+        // we will discard the current GC alloc region if
+        // * it's in the collection set (it can happen!),
+        // * it's already full (no point in using it),
+        // * it's empty (this means that it was emptied during
+        // a cleanup and it should be on the free list now), or
+        // * it's humongous (this means that it was emptied
+        // during a cleanup and was added to the free list, but
+        // has been subseqently used to allocate a humongous
+        // object that may be less than the region size).
 
         alloc_region = NULL;
       }
@@ -3977,7 +3990,7 @@ public:
     OopsInHeapRegionClosure        *scan_perm_cl;
     OopsInHeapRegionClosure        *scan_so_cl;
 
-    if (_g1h->g1_policy()->should_initiate_conc_mark()) {
+    if (_g1h->g1_policy()->during_initial_mark_pause()) {
       scan_root_cl = &scan_mark_root_cl;
       scan_perm_cl = &scan_mark_perm_cl;
       scan_so_cl   = &scan_mark_heap_rs_cl;
@@ -4140,7 +4153,7 @@ G1CollectedHeap::scan_scan_only_set(OopsInHeapRegionClosure* oc,
   FilterAndMarkInHeapRegionAndIntoCSClosure scan_and_mark(this, &boc, concurrent_mark());
 
   OopsInHeapRegionClosure *foc;
-  if (g1_policy()->should_initiate_conc_mark())
+  if (g1_policy()->during_initial_mark_pause())
     foc = &scan_and_mark;
   else
     foc = &scan_only;

src/share/vm/gc_implementation/g1/g1CollectorPolicy.cpp

@@ -178,8 +178,8 @@ G1CollectorPolicy::G1CollectorPolicy() :
   // so the hack is to do the cast  QQQ FIXME
   _pauses_btwn_concurrent_mark((size_t)G1PausesBtwnConcMark),
   _n_marks_since_last_pause(0),
-  _conc_mark_initiated(false),
-  _should_initiate_conc_mark(false),
+  _initiate_conc_mark_if_possible(false),
+  _during_initial_mark_pause(false),
   _should_revert_to_full_young_gcs(false),
   _last_full_young_gc(false),
 
@@ -198,7 +198,9 @@ G1CollectorPolicy::G1CollectorPolicy() :
   _recorded_survivor_regions(0),
   _recorded_survivor_head(NULL),
   _recorded_survivor_tail(NULL),
-  _survivors_age_table(true)
+  _survivors_age_table(true),
+
+  _gc_overhead_perc(0.0)
 
 {
   // Set up the region size and associated fields. Given that the
@@ -275,6 +277,11 @@ G1CollectorPolicy::G1CollectorPolicy() :
   // calculate_young_list_target_config during initialization
   _max_survivor_regions = G1FixedSurvivorSpaceSize / HeapRegion::GrainBytes;
 
+  assert(GCTimeRatio > 0,
+         "we should have set it to a default value set_g1_gc_flags() "
+         "if a user set it to 0");
+  _gc_overhead_perc = 100.0 * (1.0 / (1.0 + GCTimeRatio));
+
   initialize_all();
 }
 
@@ -786,7 +793,7 @@ void G1CollectorPolicy::calculate_young_list_target_config(size_t rs_lengths) {
                            elapsed_time_ms,
                            calculations,
                            full_young_gcs() ? "full" : "partial",
-                           should_initiate_conc_mark() ? " i-m" : "",
+                           during_initial_mark_pause() ? " i-m" : "",
                            _in_marking_window,
                            _in_marking_window_im);
 #endif // TRACE_CALC_YOUNG_CONFIG
@@ -1033,7 +1040,8 @@ void G1CollectorPolicy::record_full_collection_end() {
   set_full_young_gcs(true);
   _last_full_young_gc = false;
   _should_revert_to_full_young_gcs = false;
-  _should_initiate_conc_mark = false;
+  clear_initiate_conc_mark_if_possible();
+  clear_during_initial_mark_pause();
   _known_garbage_bytes = 0;
   _known_garbage_ratio = 0.0;
   _in_marking_window = false;
@@ -1179,7 +1187,8 @@ void G1CollectorPolicy::record_concurrent_mark_init_start() {
 void G1CollectorPolicy::record_concurrent_mark_init_end_pre(double
                                                    mark_init_elapsed_time_ms) {
   _during_marking = true;
-  _should_initiate_conc_mark = false;
+  assert(!initiate_conc_mark_if_possible(), "we should have cleared it by now");
+  clear_during_initial_mark_pause();
   _cur_mark_stop_world_time_ms = mark_init_elapsed_time_ms;
 }
 
@@ -1250,7 +1259,6 @@ void G1CollectorPolicy::record_concurrent_mark_cleanup_end_work2() {
   }
   _n_pauses_at_mark_end = _n_pauses;
   _n_marks_since_last_pause++;
-  _conc_mark_initiated = false;
 }
 
 void
@@ -1446,17 +1454,24 @@ void G1CollectorPolicy::record_collection_pause_end(bool abandoned) {
 #endif // PRODUCT
 
   if (in_young_gc_mode()) {
-    last_pause_included_initial_mark = _should_initiate_conc_mark;
+    last_pause_included_initial_mark = during_initial_mark_pause();
     if (last_pause_included_initial_mark)
       record_concurrent_mark_init_end_pre(0.0);
 
     size_t min_used_targ =
       (_g1->capacity() / 100) * InitiatingHeapOccupancyPercent;
 
-    if (cur_used_bytes > min_used_targ) {
-      if (cur_used_bytes <= _prev_collection_pause_used_at_end_bytes) {
-      } else if (!_g1->mark_in_progress() && !_last_full_young_gc) {
-        _should_initiate_conc_mark = true;
+
+    if (!_g1->mark_in_progress() && !_last_full_young_gc) {
+      assert(!last_pause_included_initial_mark, "invariant");
+      if (cur_used_bytes > min_used_targ &&
+          cur_used_bytes > _prev_collection_pause_used_at_end_bytes) {
+        assert(!during_initial_mark_pause(), "we should not see this here");
+
+        // Note: this might have already been set, if during the last
+        // pause we decided to start a cycle but at the beginning of
+        // this pause we decided to postpone it. That's OK.
+        set_initiate_conc_mark_if_possible();
       }
     }
 
@@ -1747,7 +1762,7 @@ void G1CollectorPolicy::record_collection_pause_end(bool abandoned) {
 
   bool new_in_marking_window = _in_marking_window;
   bool new_in_marking_window_im = false;
-  if (_should_initiate_conc_mark) {
+  if (during_initial_mark_pause()) {
     new_in_marking_window = true;
     new_in_marking_window_im = true;
   }
@@ -2166,7 +2181,13 @@ void G1CollectorPolicy::check_if_region_is_too_expensive(double
   if (predicted_time_ms > _expensive_region_limit_ms) {
     if (!in_young_gc_mode()) {
         set_full_young_gcs(true);
-      _should_initiate_conc_mark = true;
+        // We might want to do something different here. However,
+        // right now we don't support the non-generational G1 mode
+        // (and in fact we are planning to remove the associated code,
+        // see CR 6814390). So, let's leave it as is and this will be
+        // removed some time in the future
+        ShouldNotReachHere();
+        set_during_initial_mark_pause();
     } else
       // no point in doing another partial one
       _should_revert_to_full_young_gcs = true;
@@ -2288,7 +2309,7 @@ G1CollectorPolicy::conservative_avg_survival_fraction_work(double avg,
 }
 
 size_t G1CollectorPolicy::expansion_amount() {
-  if ((int)(recent_avg_pause_time_ratio() * 100.0) > G1GCPercent) {
+  if ((recent_avg_pause_time_ratio() * 100.0) > _gc_overhead_perc) {
     // We will double the existing space, or take
     // G1ExpandByPercentOfAvailable % of the available expansion
     // space, whichever is smaller, bounded below by a minimum
@@ -2689,6 +2710,50 @@ bool G1CollectorPolicy_BestRegionsFirst::assertMarkedBytesDataOK() {
 }
 #endif
 
+void
+G1CollectorPolicy::decide_on_conc_mark_initiation() {
+  // We are about to decide on whether this pause will be an
+  // initial-mark pause.
+
+  // First, during_initial_mark_pause() should not be already set. We
+  // will set it here if we have to. However, it should be cleared by
+  // the end of the pause (it's only set for the duration of an
+  // initial-mark pause).
+  assert(!during_initial_mark_pause(), "pre-condition");
+
+  if (initiate_conc_mark_if_possible()) {
+    // We had noticed on a previous pause that the heap occupancy has
+    // gone over the initiating threshold and we should start a
+    // concurrent marking cycle. So we might initiate one.
+
+    bool during_cycle = _g1->concurrent_mark()->cmThread()->during_cycle();
+    if (!during_cycle) {
+      // The concurrent marking thread is not "during a cycle", i.e.,
+      // it has completed the last one. So we can go ahead and
+      // initiate a new cycle.
+
+      set_during_initial_mark_pause();
+
+      // And we can now clear initiate_conc_mark_if_possible() as
+      // we've already acted on it.
+      clear_initiate_conc_mark_if_possible();
+    } else {
+      // The concurrent marking thread is still finishing up the
+      // previous cycle. If we start one right now the two cycles
+      // overlap. In particular, the concurrent marking thread might
+      // be in the process of clearing the next marking bitmap (which
+      // we will use for the next cycle if we start one). Starting a
+      // cycle now will be bad given that parts of the marking
+      // information might get cleared by the marking thread. And we
+      // cannot wait for the marking thread to finish the cycle as it
+      // periodically yields while clearing the next marking bitmap
+      // and, if it's in a yield point, it's waiting for us to
+      // finish. So, at this point we will not start a cycle and we'll
+      // let the concurrent marking thread complete the last one.
+    }
+  }
+}
+
 void
 G1CollectorPolicy_BestRegionsFirst::
 record_collection_pause_start(double start_time_sec, size_t start_used) {

src/share/vm/gc_implementation/g1/g1CollectorPolicy.hpp

@@ -215,6 +215,8 @@ protected:
   SurvRateGroup*        _survivor_surv_rate_group;
   // add here any more surv rate groups
 
+  double                _gc_overhead_perc;
+
   bool during_marking() {
     return _during_marking;
   }
@@ -722,11 +724,31 @@ protected:
 
   size_t _n_marks_since_last_pause;
 
-  // True iff CM has been initiated.
-  bool _conc_mark_initiated;
+  // At the end of a pause we check the heap occupancy and we decide
+  // whether we will start a marking cycle during the next pause. If
+  // we decide that we want to do that, we will set this parameter to
+  // true. So, this parameter will stay true between the end of a
+  // pause and the beginning of a subsequent pause (not necessarily
+  // the next one, see the comments on the next field) when we decide
+  // that we will indeed start a marking cycle and do the initial-mark
+  // work.
+  volatile bool _initiate_conc_mark_if_possible;
+
+  // If initiate_conc_mark_if_possible() is set at the beginning of a
+  // pause, it is a suggestion that the pause should start a marking
+  // cycle by doing the initial-mark work. However, it is possible
+  // that the concurrent marking thread is still finishing up the
+  // previous marking cycle (e.g., clearing the next marking
+  // bitmap). If that is the case we cannot start a new cycle and
+  // we'll have to wait for the concurrent marking thread to finish
+  // what it is doing. In this case we will postpone the marking cycle
+  // initiation decision for the next pause. When we eventually decide
+  // to start a cycle, we will set _during_initial_mark_pause which
+  // will stay true until the end of the initial-mark pause and it's
+  // the condition that indicates that a pause is doing the
+  // initial-mark work.
+  volatile bool _during_initial_mark_pause;
 
-  // True iff CM should be initiated
-  bool _should_initiate_conc_mark;
   bool _should_revert_to_full_young_gcs;
   bool _last_full_young_gc;
 
@@ -979,9 +1001,21 @@ public:
   // Add "hr" to the CS.
   void add_to_collection_set(HeapRegion* hr);
 
-  bool should_initiate_conc_mark()      { return _should_initiate_conc_mark; }
-  void set_should_initiate_conc_mark()  { _should_initiate_conc_mark = true; }
-  void unset_should_initiate_conc_mark(){ _should_initiate_conc_mark = false; }
+  bool initiate_conc_mark_if_possible()       { return _initiate_conc_mark_if_possible;  }
+  void set_initiate_conc_mark_if_possible()   { _initiate_conc_mark_if_possible = true;  }
+  void clear_initiate_conc_mark_if_possible() { _initiate_conc_mark_if_possible = false; }
+
+  bool during_initial_mark_pause()      { return _during_initial_mark_pause;  }
+  void set_during_initial_mark_pause()  { _during_initial_mark_pause = true;  }
+  void clear_during_initial_mark_pause(){ _during_initial_mark_pause = false; }
+
+  // This is called at the very beginning of an evacuation pause (it
+  // has to be the first thing that the pause does). If
+  // initiate_conc_mark_if_possible() is true, and the concurrent
+  // marking thread has completed its work during the previous cycle,
+  // it will set during_initial_mark_pause() to so that the pause does
+  // the initial-mark work and start a marking cycle.
+  void decide_on_conc_mark_initiation();
 
   // If an expansion would be appropriate, because recent GC overhead had
   // exceeded the desired limit, return an amount to expand by.

src/share/vm/gc_implementation/g1/g1_globals.hpp

@@ -40,9 +40,6 @@
   develop(bool, G1Gen, true,                                                \
           "If true, it will enable the generational G1")                    \
                                                                             \
-  develop(intx, G1GCPercent, 10,                                            \
-          "The desired percent time spent on GC")                           \
-                                                                            \
   develop(intx, G1PolicyVerbose, 0,                                         \
           "The verbosity level on G1 policy decisions")                     \
                                                                             \
@@ -270,11 +267,11 @@
   product(uintx, G1HeapRegionSize, 0,                                       \
           "Size of the G1 regions.")                                        \
                                                                             \
-  experimental(bool, G1UseParallelRSetUpdating, false,                      \
+  experimental(bool, G1UseParallelRSetUpdating, true,                       \
           "Enables the parallelization of remembered set updating "         \
           "during evacuation pauses")                                       \
                                                                             \
-  experimental(bool, G1UseParallelRSetScanning, false,                      \
+  experimental(bool, G1UseParallelRSetScanning, true,                       \
           "Enables the parallelization of remembered set scanning "         \
           "during evacuation pauses")                                       \
                                                                             \

src/share/vm/runtime/arguments.cpp

@@ -1353,6 +1353,16 @@ void Arguments::set_g1_gc_flags() {
       MarkStackSize / K, MarkStackSizeMax / K);
     tty->print_cr("ConcGCThreads: %u", ConcGCThreads);
   }
+
+  if (FLAG_IS_DEFAULT(GCTimeRatio) || GCTimeRatio == 0) {
+    // In G1, we want the default GC overhead goal to be higher than
+    // say in PS. So we set it here to 10%. Otherwise the heap might
+    // be expanded more aggressively than we would like it to. In
+    // fact, even 10% seems to not be high enough in some cases
+    // (especially small GC stress tests that the main thing they do
+    // is allocation). We might consider increase it further.
+    FLAG_SET_DEFAULT(GCTimeRatio, 9);
+  }
 }
 
 void Arguments::set_heap_size() {

src/share/vm/runtime/mutexLocker.cpp

@@ -70,6 +70,7 @@ Monitor* FullGCCount_lock             = NULL;
 Monitor* CMark_lock                   = NULL;
 Monitor* ZF_mon                       = NULL;
 Monitor* Cleanup_mon                  = NULL;
+Mutex*   CMRegionStack_lock           = NULL;
 Mutex*   SATB_Q_FL_lock               = NULL;
 Monitor* SATB_Q_CBL_mon               = NULL;
 Mutex*   Shared_SATB_Q_lock           = NULL;
@@ -167,6 +168,7 @@ void mutex_init() {
     def(CMark_lock                 , Monitor, nonleaf,     true ); // coordinate concurrent mark thread
     def(ZF_mon                     , Monitor, leaf,        true );
     def(Cleanup_mon                , Monitor, nonleaf,     true );
+    def(CMRegionStack_lock         , Mutex,   leaf,        true );
     def(SATB_Q_FL_lock             , Mutex  , special,     true );
     def(SATB_Q_CBL_mon             , Monitor, nonleaf,     true );
     def(Shared_SATB_Q_lock         , Mutex,   nonleaf,     true );

src/share/vm/runtime/mutexLocker.hpp

@@ -63,6 +63,7 @@ extern Monitor* FullGCCount_lock;                // in support of "concurrent" f
 extern Monitor* CMark_lock;                      // used for concurrent mark thread coordination
 extern Monitor* ZF_mon;                          // used for G1 conc zero-fill.
 extern Monitor* Cleanup_mon;                     // used for G1 conc cleanup.
+extern Mutex*   CMRegionStack_lock;              // used for protecting accesses to the CM region stack
 extern Mutex*   SATB_Q_FL_lock;                  // Protects SATB Q
                                                  // buffer free list.
 extern Monitor* SATB_Q_CBL_mon;                  // Protects SATB Q