/* * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * * BSD LICENSE * * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name of Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include #include #include #include #include #include #include #include "host.h" #include "isci.h" #include "task.h" #include "probe_roms.h" #define MAJ 1 #define MIN 1 #define BUILD 0 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ __stringify(BUILD) MODULE_VERSION(DRV_VERSION); static struct scsi_transport_template *isci_transport_template; static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { { PCI_VDEVICE(INTEL, 0x1D61),}, { PCI_VDEVICE(INTEL, 0x1D63),}, { PCI_VDEVICE(INTEL, 0x1D65),}, { PCI_VDEVICE(INTEL, 0x1D67),}, { PCI_VDEVICE(INTEL, 0x1D69),}, { PCI_VDEVICE(INTEL, 0x1D6B),}, { PCI_VDEVICE(INTEL, 0x1D60),}, { PCI_VDEVICE(INTEL, 0x1D62),}, { PCI_VDEVICE(INTEL, 0x1D64),}, { PCI_VDEVICE(INTEL, 0x1D66),}, { PCI_VDEVICE(INTEL, 0x1D68),}, { PCI_VDEVICE(INTEL, 0x1D6A),}, {} }; MODULE_DEVICE_TABLE(pci, isci_id_table); /* linux isci specific settings */ unsigned char no_outbound_task_to = 2; module_param(no_outbound_task_to, byte, 0); MODULE_PARM_DESC(no_outbound_task_to, "No Outbound Task Timeout (1us incr)"); u16 ssp_max_occ_to = 20; module_param(ssp_max_occ_to, ushort, 0); MODULE_PARM_DESC(ssp_max_occ_to, "SSP Max occupancy timeout (100us incr)"); u16 stp_max_occ_to = 5; module_param(stp_max_occ_to, ushort, 0); MODULE_PARM_DESC(stp_max_occ_to, "STP Max occupancy timeout (100us incr)"); u16 ssp_inactive_to = 5; module_param(ssp_inactive_to, ushort, 0); MODULE_PARM_DESC(ssp_inactive_to, "SSP inactivity timeout (100us incr)"); u16 stp_inactive_to = 5; module_param(stp_inactive_to, ushort, 0); MODULE_PARM_DESC(stp_inactive_to, "STP inactivity timeout (100us incr)"); unsigned char phy_gen = SCIC_SDS_PARM_GEN2_SPEED; module_param(phy_gen, byte, 0); MODULE_PARM_DESC(phy_gen, "PHY generation (1: 1.5Gbps 2: 3.0Gbps 3: 6.0Gbps)"); unsigned char max_concurr_spinup; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); uint cable_selection_override = CABLE_OVERRIDE_DISABLED; module_param(cable_selection_override, uint, 0); MODULE_PARM_DESC(cable_selection_override, "This field indicates length of the SAS/SATA cable between " "host and device. If any bits > 15 are set (default) " "indicates \"use platform defaults\""); static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) { struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); } static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); struct device_attribute *isci_host_attrs[] = { &dev_attr_isci_id, NULL }; static struct scsi_host_template isci_sht = { .module = THIS_MODULE, .name = DRV_NAME, .proc_name = DRV_NAME, .queuecommand = sas_queuecommand, .target_alloc = sas_target_alloc, .slave_configure = sas_slave_configure, .scan_finished = isci_host_scan_finished, .scan_start = isci_host_scan_start, .change_queue_depth = sas_change_queue_depth, .change_queue_type = sas_change_queue_type, .bios_param = sas_bios_param, .can_queue = ISCI_CAN_QUEUE_VAL, .cmd_per_lun = 1, .this_id = -1, .sg_tablesize = SG_ALL, .max_sectors = SCSI_DEFAULT_MAX_SECTORS, .use_clustering = ENABLE_CLUSTERING, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, .shost_attrs = isci_host_attrs, }; static struct sas_domain_function_template isci_transport_ops = { /* The class calls these to notify the LLDD of an event. */ .lldd_port_formed = isci_port_formed, .lldd_port_deformed = isci_port_deformed, /* The class calls these when a device is found or gone. */ .lldd_dev_found = isci_remote_device_found, .lldd_dev_gone = isci_remote_device_gone, .lldd_execute_task = isci_task_execute_task, /* Task Management Functions. Must be called from process context. */ .lldd_abort_task = isci_task_abort_task, .lldd_abort_task_set = isci_task_abort_task_set, .lldd_clear_aca = isci_task_clear_aca, .lldd_clear_task_set = isci_task_clear_task_set, .lldd_I_T_nexus_reset = isci_task_I_T_nexus_reset, .lldd_lu_reset = isci_task_lu_reset, .lldd_query_task = isci_task_query_task, /* ata recovery called from ata-eh */ .lldd_ata_check_ready = isci_ata_check_ready, /* Port and Adapter management */ .lldd_clear_nexus_port = isci_task_clear_nexus_port, .lldd_clear_nexus_ha = isci_task_clear_nexus_ha, /* Phy management */ .lldd_control_phy = isci_phy_control, /* GPIO support */ .lldd_write_gpio = isci_gpio_write, }; /****************************************************************************** * P R O T E C T E D M E T H O D S ******************************************************************************/ /** * isci_register_sas_ha() - This method initializes various lldd * specific members of the sas_ha struct and calls the libsas * sas_register_ha() function. * @isci_host: This parameter specifies the lldd specific wrapper for the * libsas sas_ha struct. * * This method returns an error code indicating sucess or failure. The user * should check for possible memory allocation error return otherwise, a zero * indicates success. */ static int isci_register_sas_ha(struct isci_host *isci_host) { int i; struct sas_ha_struct *sas_ha = &(isci_host->sas_ha); struct asd_sas_phy **sas_phys; struct asd_sas_port **sas_ports; sas_phys = devm_kzalloc(&isci_host->pdev->dev, SCI_MAX_PHYS * sizeof(void *), GFP_KERNEL); if (!sas_phys) return -ENOMEM; sas_ports = devm_kzalloc(&isci_host->pdev->dev, SCI_MAX_PORTS * sizeof(void *), GFP_KERNEL); if (!sas_ports) return -ENOMEM; sas_ha->sas_ha_name = DRV_NAME; sas_ha->lldd_module = THIS_MODULE; sas_ha->sas_addr = &isci_host->phys[0].sas_addr[0]; for (i = 0; i < SCI_MAX_PHYS; i++) { sas_phys[i] = &isci_host->phys[i].sas_phy; sas_ports[i] = &isci_host->sas_ports[i]; } sas_ha->sas_phy = sas_phys; sas_ha->sas_port = sas_ports; sas_ha->num_phys = SCI_MAX_PHYS; sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL; sas_ha->lldd_max_execute_num = 1; sas_ha->strict_wide_ports = 1; sas_register_ha(sas_ha); return 0; } static void isci_unregister(struct isci_host *isci_host) { struct Scsi_Host *shost; if (!isci_host) return; sas_unregister_ha(&isci_host->sas_ha); shost = to_shost(isci_host); sas_remove_host(shost); scsi_remove_host(shost); scsi_host_put(shost); } static int __devinit isci_pci_init(struct pci_dev *pdev) { int err, bar_num, bar_mask = 0; void __iomem * const *iomap; err = pcim_enable_device(pdev); if (err) { dev_err(&pdev->dev, "failed enable PCI device %s!\n", pci_name(pdev)); return err; } for (bar_num = 0; bar_num < SCI_PCI_BAR_COUNT; bar_num++) bar_mask |= 1 << (bar_num * 2); err = pcim_iomap_regions(pdev, bar_mask, DRV_NAME); if (err) return err; iomap = pcim_iomap_table(pdev); if (!iomap) return -ENOMEM; pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(64)); if (err) { err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) return err; } err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64)); if (err) { err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32)); if (err) return err; } return 0; } static int num_controllers(struct pci_dev *pdev) { /* bar size alone can tell us if we are running with a dual controller * part, no need to trust revision ids that might be under broken firmware * control */ resource_size_t scu_bar_size = pci_resource_len(pdev, SCI_SCU_BAR*2); resource_size_t smu_bar_size = pci_resource_len(pdev, SCI_SMU_BAR*2); if (scu_bar_size >= SCI_SCU_BAR_SIZE*SCI_MAX_CONTROLLERS && smu_bar_size >= SCI_SMU_BAR_SIZE*SCI_MAX_CONTROLLERS) return SCI_MAX_CONTROLLERS; else return 1; } static int isci_setup_interrupts(struct pci_dev *pdev) { int err, i, num_msix; struct isci_host *ihost; struct isci_pci_info *pci_info = to_pci_info(pdev); /* * Determine the number of vectors associated with this * PCI function. */ num_msix = num_controllers(pdev) * SCI_NUM_MSI_X_INT; for (i = 0; i < num_msix; i++) pci_info->msix_entries[i].entry = i; err = pci_enable_msix(pdev, pci_info->msix_entries, num_msix); if (err) goto intx; for (i = 0; i < num_msix; i++) { int id = i / SCI_NUM_MSI_X_INT; struct msix_entry *msix = &pci_info->msix_entries[i]; irq_handler_t isr; ihost = pci_info->hosts[id]; /* odd numbered vectors are error interrupts */ if (i & 1) isr = isci_error_isr; else isr = isci_msix_isr; err = devm_request_irq(&pdev->dev, msix->vector, isr, 0, DRV_NAME"-msix", ihost); if (!err) continue; dev_info(&pdev->dev, "msix setup failed falling back to intx\n"); while (i--) { id = i / SCI_NUM_MSI_X_INT; ihost = pci_info->hosts[id]; msix = &pci_info->msix_entries[i]; devm_free_irq(&pdev->dev, msix->vector, ihost); } pci_disable_msix(pdev); goto intx; } return 0; intx: for_each_isci_host(i, ihost, pdev) { err = devm_request_irq(&pdev->dev, pdev->irq, isci_intx_isr, IRQF_SHARED, DRV_NAME"-intx", ihost); if (err) break; } return err; } static void isci_user_parameters_get(struct sci_user_parameters *u) { int i; for (i = 0; i < SCI_MAX_PHYS; i++) { struct sci_phy_user_params *u_phy = &u->phys[i]; u_phy->max_speed_generation = phy_gen; /* we are not exporting these for now */ u_phy->align_insertion_frequency = 0x7f; u_phy->in_connection_align_insertion_frequency = 0xff; u_phy->notify_enable_spin_up_insertion_frequency = 0x33; } u->stp_inactivity_timeout = stp_inactive_to; u->ssp_inactivity_timeout = ssp_inactive_to; u->stp_max_occupancy_timeout = stp_max_occ_to; u->ssp_max_occupancy_timeout = ssp_max_occ_to; u->no_outbound_task_timeout = no_outbound_task_to; u->max_concurr_spinup = max_concurr_spinup; } static enum sci_status sci_user_parameters_set(struct isci_host *ihost, struct sci_user_parameters *sci_parms) { u16 index; /* * Validate the user parameters. If they are not legal, then * return a failure. */ for (index = 0; index < SCI_MAX_PHYS; index++) { struct sci_phy_user_params *u; u = &sci_parms->phys[index]; if (!((u->max_speed_generation <= SCIC_SDS_PARM_MAX_SPEED) && (u->max_speed_generation > SCIC_SDS_PARM_NO_SPEED))) return SCI_FAILURE_INVALID_PARAMETER_VALUE; if (u->in_connection_align_insertion_frequency < 3) return SCI_FAILURE_INVALID_PARAMETER_VALUE; if ((u->in_connection_align_insertion_frequency < 3) || (u->align_insertion_frequency == 0) || (u->notify_enable_spin_up_insertion_frequency == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; } if ((sci_parms->stp_inactivity_timeout == 0) || (sci_parms->ssp_inactivity_timeout == 0) || (sci_parms->stp_max_occupancy_timeout == 0) || (sci_parms->ssp_max_occupancy_timeout == 0) || (sci_parms->no_outbound_task_timeout == 0)) return SCI_FAILURE_INVALID_PARAMETER_VALUE; memcpy(&ihost->user_parameters, sci_parms, sizeof(*sci_parms)); return SCI_SUCCESS; } static void sci_oem_defaults(struct isci_host *ihost) { /* these defaults are overridden by the platform / firmware */ struct sci_user_parameters *user = &ihost->user_parameters; struct sci_oem_params *oem = &ihost->oem_parameters; int i; /* Default to APC mode. */ oem->controller.mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE; /* Default to APC mode. */ oem->controller.max_concurr_spin_up = 1; /* Default to no SSC operation. */ oem->controller.do_enable_ssc = false; /* Default to short cables on all phys. */ oem->controller.cable_selection_mask = 0; /* Initialize all of the port parameter information to narrow ports. */ for (i = 0; i < SCI_MAX_PORTS; i++) oem->ports[i].phy_mask = 0; /* Initialize all of the phy parameter information. */ for (i = 0; i < SCI_MAX_PHYS; i++) { /* Default to 3G (i.e. Gen 2). */ user->phys[i].max_speed_generation = SCIC_SDS_PARM_GEN2_SPEED; /* the frequencies cannot be 0 */ user->phys[i].align_insertion_frequency = 0x7f; user->phys[i].in_connection_align_insertion_frequency = 0xff; user->phys[i].notify_enable_spin_up_insertion_frequency = 0x33; /* Previous Vitesse based expanders had a arbitration issue that * is worked around by having the upper 32-bits of SAS address * with a value greater then the Vitesse company identifier. * Hence, usage of 0x5FCFFFFF. */ oem->phys[i].sas_address.low = 0x1 + ihost->id; oem->phys[i].sas_address.high = 0x5FCFFFFF; } user->stp_inactivity_timeout = 5; user->ssp_inactivity_timeout = 5; user->stp_max_occupancy_timeout = 5; user->ssp_max_occupancy_timeout = 20; user->no_outbound_task_timeout = 2; } static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) { struct isci_orom *orom = to_pci_info(pdev)->orom; struct sci_user_parameters sci_user_params; u8 oem_version = ISCI_ROM_VER_1_0; struct isci_host *ihost; struct Scsi_Host *shost; int err, i; ihost = devm_kzalloc(&pdev->dev, sizeof(*ihost), GFP_KERNEL); if (!ihost) return NULL; ihost->pdev = pdev; ihost->id = id; spin_lock_init(&ihost->scic_lock); init_waitqueue_head(&ihost->eventq); ihost->sas_ha.dev = &ihost->pdev->dev; ihost->sas_ha.lldd_ha = ihost; tasklet_init(&ihost->completion_tasklet, isci_host_completion_routine, (unsigned long)ihost); /* validate module parameters */ /* TODO: kill struct sci_user_parameters and reference directly */ sci_oem_defaults(ihost); isci_user_parameters_get(&sci_user_params); if (sci_user_parameters_set(ihost, &sci_user_params)) { dev_warn(&pdev->dev, "%s: sci_user_parameters_set failed\n", __func__); return NULL; } /* sanity check platform (or 'firmware') oem parameters */ if (orom) { if (id < 0 || id >= SCI_MAX_CONTROLLERS || id > orom->hdr.num_elements) { dev_warn(&pdev->dev, "parsing firmware oem parameters failed\n"); return NULL; } ihost->oem_parameters = orom->ctrl[id]; oem_version = orom->hdr.version; } /* validate oem parameters (platform, firmware, or built-in defaults) */ if (sci_oem_parameters_validate(&ihost->oem_parameters, oem_version)) { dev_warn(&pdev->dev, "oem parameter validation failed\n"); return NULL; } INIT_LIST_HEAD(&ihost->requests_to_complete); INIT_LIST_HEAD(&ihost->requests_to_errorback); for (i = 0; i < SCI_MAX_PORTS; i++) { struct isci_port *iport = &ihost->ports[i]; INIT_LIST_HEAD(&iport->remote_dev_list); iport->isci_host = ihost; } for (i = 0; i < SCI_MAX_PHYS; i++) isci_phy_init(&ihost->phys[i], ihost, i); for (i = 0; i < SCI_MAX_REMOTE_DEVICES; i++) { struct isci_remote_device *idev = &ihost->devices[i]; INIT_LIST_HEAD(&idev->reqs_in_process); INIT_LIST_HEAD(&idev->node); } shost = scsi_host_alloc(&isci_sht, sizeof(void *)); if (!shost) return NULL; dev_info(&pdev->dev, "%sSCU controller %d: phy 3-0 cables: " "{%s, %s, %s, %s}\n", (is_cable_select_overridden() ? "* " : ""), ihost->id, lookup_cable_names(decode_cable_selection(ihost, 3)), lookup_cable_names(decode_cable_selection(ihost, 2)), lookup_cable_names(decode_cable_selection(ihost, 1)), lookup_cable_names(decode_cable_selection(ihost, 0))); err = isci_host_init(ihost); if (err) goto err_shost; SHOST_TO_SAS_HA(shost) = &ihost->sas_ha; ihost->sas_ha.core.shost = shost; shost->transportt = isci_transport_template; shost->max_id = ~0; shost->max_lun = ~0; shost->max_cmd_len = MAX_COMMAND_SIZE; err = scsi_add_host(shost, &pdev->dev); if (err) goto err_shost; err = isci_register_sas_ha(ihost); if (err) goto err_shost_remove; return ihost; err_shost_remove: scsi_remove_host(shost); err_shost: scsi_host_put(shost); return NULL; } static int __devinit isci_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct isci_pci_info *pci_info; int err, i; struct isci_host *isci_host; const struct firmware *fw = NULL; struct isci_orom *orom = NULL; char *source = "(platform)"; dev_info(&pdev->dev, "driver configured for rev: %d silicon\n", pdev->revision); pci_info = devm_kzalloc(&pdev->dev, sizeof(*pci_info), GFP_KERNEL); if (!pci_info) return -ENOMEM; pci_set_drvdata(pdev, pci_info); if (efi_enabled) orom = isci_get_efi_var(pdev); if (!orom) orom = isci_request_oprom(pdev); for (i = 0; orom && i < num_controllers(pdev); i++) { if (sci_oem_parameters_validate(&orom->ctrl[i], orom->hdr.version)) { dev_warn(&pdev->dev, "[%d]: invalid oem parameters detected, falling back to firmware\n", i); devm_kfree(&pdev->dev, orom); orom = NULL; break; } } if (!orom) { source = "(firmware)"; orom = isci_request_firmware(pdev, fw); if (!orom) { /* TODO convert this to WARN_TAINT_ONCE once the * orom/efi parameter support is widely available */ dev_warn(&pdev->dev, "Loading user firmware failed, using default " "values\n"); dev_warn(&pdev->dev, "Default OEM configuration being used: 4 " "narrow ports, and default SAS Addresses\n"); } } if (orom) dev_info(&pdev->dev, "OEM SAS parameters (version: %u.%u) loaded %s\n", (orom->hdr.version & 0xf0) >> 4, (orom->hdr.version & 0xf), source); pci_info->orom = orom; err = isci_pci_init(pdev); if (err) return err; for (i = 0; i < num_controllers(pdev); i++) { struct isci_host *h = isci_host_alloc(pdev, i); if (!h) { err = -ENOMEM; goto err_host_alloc; } pci_info->hosts[i] = h; /* turn on DIF support */ scsi_host_set_prot(to_shost(h), SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION); scsi_host_set_guard(to_shost(h), SHOST_DIX_GUARD_CRC); } err = isci_setup_interrupts(pdev); if (err) goto err_host_alloc; for_each_isci_host(i, isci_host, pdev) scsi_scan_host(to_shost(isci_host)); return 0; err_host_alloc: for_each_isci_host(i, isci_host, pdev) isci_unregister(isci_host); return err; } static void __devexit isci_pci_remove(struct pci_dev *pdev) { struct isci_host *ihost; int i; for_each_isci_host(i, ihost, pdev) { wait_for_start(ihost); isci_unregister(ihost); isci_host_deinit(ihost); } } static struct pci_driver isci_pci_driver = { .name = DRV_NAME, .id_table = isci_id_table, .probe = isci_pci_probe, .remove = __devexit_p(isci_pci_remove), }; static __init int isci_init(void) { int err; pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n", DRV_NAME, DRV_VERSION); isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); if (!isci_transport_template) return -ENOMEM; err = pci_register_driver(&isci_pci_driver); if (err) sas_release_transport(isci_transport_template); return err; } static __exit void isci_exit(void) { pci_unregister_driver(&isci_pci_driver); sas_release_transport(isci_transport_template); } MODULE_LICENSE("Dual BSD/GPL"); MODULE_FIRMWARE(ISCI_FW_NAME); module_init(isci_init); module_exit(isci_exit);