/* * Copyright (c) 2000-2004 by David Brownell * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License * for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software Foundation, * Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "../core/hcd.h" #include #include #include #include #include /*-------------------------------------------------------------------------*/ /* * EHCI hc_driver implementation ... experimental, incomplete. * Based on the final 1.0 register interface specification. * * USB 2.0 shows up in upcoming www.pcmcia.org technology. * First was PCMCIA, like ISA; then CardBus, which is PCI. * Next comes "CardBay", using USB 2.0 signals. * * Contains additional contributions by Brad Hards, Rory Bolt, and others. * Special thanks to Intel and VIA for providing host controllers to * test this driver on, and Cypress (including In-System Design) for * providing early devices for those host controllers to talk to! * * HISTORY: * * 2004-05-10 Root hub and PCI suspend/resume support; remote wakeup. (db) * 2004-02-24 Replace pci_* with generic dma_* API calls (dsaxena@plexity.net) * 2003-12-29 Rewritten high speed iso transfer support (by Michal Sojka, * , updates by DB). * * 2002-11-29 Correct handling for hw async_next register. * 2002-08-06 Handling for bulk and interrupt transfers is mostly shared; * only scheduling is different, no arbitrary limitations. * 2002-07-25 Sanity check PCI reads, mostly for better cardbus support, * clean up HC run state handshaking. * 2002-05-24 Preliminary FS/LS interrupts, using scheduling shortcuts * 2002-05-11 Clear TT errors for FS/LS ctrl/bulk. Fill in some other * missing pieces: enabling 64bit dma, handoff from BIOS/SMM. * 2002-05-07 Some error path cleanups to report better errors; wmb(); * use non-CVS version id; better iso bandwidth claim. * 2002-04-19 Control/bulk/interrupt submit no longer uses giveback() on * errors in submit path. Bugfixes to interrupt scheduling/processing. * 2002-03-05 Initial high-speed ISO support; reduce ITD memory; shift * more checking to generic hcd framework (db). Make it work with * Philips EHCI; reduce PCI traffic; shorten IRQ path (Rory Bolt). * 2002-01-14 Minor cleanup; version synch. * 2002-01-08 Fix roothub handoff of FS/LS to companion controllers. * 2002-01-04 Control/Bulk queuing behaves. * * 2001-12-12 Initial patch version for Linux 2.5.1 kernel. * 2001-June Works with usb-storage and NEC EHCI on 2.4 */ #define DRIVER_VERSION "10 Dec 2004" #define DRIVER_AUTHOR "David Brownell" #define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver" static const char hcd_name [] = "ehci_hcd"; #undef EHCI_VERBOSE_DEBUG #undef EHCI_URB_TRACE #ifdef DEBUG #define EHCI_STATS #endif /* magic numbers that can affect system performance */ #define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */ #define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */ #define EHCI_TUNE_RL_TT 0 #define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */ #define EHCI_TUNE_MULT_TT 1 #define EHCI_TUNE_FLS 2 /* (small) 256 frame schedule */ #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ #define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 module_param (log2_irq_thresh, int, S_IRUGO); MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes"); /* initial park setting: slower than hw default */ static unsigned park = 0; module_param (park, uint, S_IRUGO); MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets"); /* for flakey hardware, ignore overcurrent indicators */ static int ignore_oc = 0; module_param (ignore_oc, bool, S_IRUGO); MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); #define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT) /*-------------------------------------------------------------------------*/ #include "ehci.h" #include "ehci-dbg.c" /*-------------------------------------------------------------------------*/ /* * handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read * @mask: bits to look at in result of read * @done: value of those bits when handshake succeeds * @usec: timeout in microseconds * * Returns negative errno, or zero on success * * Success happens when the "mask" bits have the specified value (hardware * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). * * That last failure should_only happen in cases like physical cardbus eject * before driver shutdown. But it also seems to be caused by bugs in cardbus * bridge shutdown: shutting down the bridge before the devices using it. */ static int handshake (struct ehci_hcd *ehci, void __iomem *ptr, u32 mask, u32 done, int usec) { u32 result; do { result = ehci_readl(ehci, ptr); if (result == ~(u32)0) /* card removed */ return -ENODEV; result &= mask; if (result == done) return 0; udelay (1); usec--; } while (usec > 0); return -ETIMEDOUT; } /* force HC to halt state from unknown (EHCI spec section 2.3) */ static int ehci_halt (struct ehci_hcd *ehci) { u32 temp = ehci_readl(ehci, &ehci->regs->status); /* disable any irqs left enabled by previous code */ ehci_writel(ehci, 0, &ehci->regs->intr_enable); if ((temp & STS_HALT) != 0) return 0; temp = ehci_readl(ehci, &ehci->regs->command); temp &= ~CMD_RUN; ehci_writel(ehci, temp, &ehci->regs->command); return handshake (ehci, &ehci->regs->status, STS_HALT, STS_HALT, 16 * 125); } /* put TDI/ARC silicon into EHCI mode */ static void tdi_reset (struct ehci_hcd *ehci) { u32 __iomem *reg_ptr; u32 tmp; reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + USBMODE); tmp = ehci_readl(ehci, reg_ptr); tmp |= USBMODE_CM_HC; /* The default byte access to MMR space is LE after * controller reset. Set the required endian mode * for transfer buffers to match the host microprocessor */ if (ehci_big_endian_mmio(ehci)) tmp |= USBMODE_BE; ehci_writel(ehci, tmp, reg_ptr); } /* reset a non-running (STS_HALT == 1) controller */ static int ehci_reset (struct ehci_hcd *ehci) { int retval; u32 command = ehci_readl(ehci, &ehci->regs->command); command |= CMD_RESET; dbg_cmd (ehci, "reset", command); ehci_writel(ehci, command, &ehci->regs->command); ehci_to_hcd(ehci)->state = HC_STATE_HALT; ehci->next_statechange = jiffies; retval = handshake (ehci, &ehci->regs->command, CMD_RESET, 0, 250 * 1000); if (retval) return retval; if (ehci_is_TDI(ehci)) tdi_reset (ehci); return retval; } /* idle the controller (from running) */ static void ehci_quiesce (struct ehci_hcd *ehci) { u32 temp; #ifdef DEBUG if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) BUG (); #endif /* wait for any schedule enables/disables to take effect */ temp = ehci_readl(ehci, &ehci->regs->command) << 10; temp &= STS_ASS | STS_PSS; if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp, 16 * 125) != 0) { ehci_to_hcd(ehci)->state = HC_STATE_HALT; return; } /* then disable anything that's still active */ temp = ehci_readl(ehci, &ehci->regs->command); temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE); ehci_writel(ehci, temp, &ehci->regs->command); /* hardware can take 16 microframes to turn off ... */ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0, 16 * 125) != 0) { ehci_to_hcd(ehci)->state = HC_STATE_HALT; return; } } /*-------------------------------------------------------------------------*/ static void end_unlink_async(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); #include "ehci-hub.c" #include "ehci-mem.c" #include "ehci-q.c" #include "ehci-sched.c" /*-------------------------------------------------------------------------*/ static void ehci_iaa_watchdog(unsigned long param) { struct ehci_hcd *ehci = (struct ehci_hcd *) param; unsigned long flags; u32 status, cmd; spin_lock_irqsave (&ehci->lock, flags); WARN_ON(!ehci->reclaim); status = ehci_readl(ehci, &ehci->regs->status); cmd = ehci_readl(ehci, &ehci->regs->command); ehci_dbg(ehci, "IAA watchdog: status %x cmd %x\n", status, cmd); /* lost IAA irqs wedge things badly; seen first with a vt8235 */ if (ehci->reclaim) { if (status & STS_IAA) { ehci_vdbg (ehci, "lost IAA\n"); COUNT (ehci->stats.lost_iaa); ehci_writel(ehci, STS_IAA, &ehci->regs->status); } ehci_writel(ehci, cmd & ~CMD_IAAD, &ehci->regs->command); end_unlink_async(ehci); } spin_unlock_irqrestore(&ehci->lock, flags); } static void ehci_watchdog(unsigned long param) { struct ehci_hcd *ehci = (struct ehci_hcd *) param; unsigned long flags; spin_lock_irqsave(&ehci->lock, flags); /* stop async processing after it's idled a bit */ if (test_bit (TIMER_ASYNC_OFF, &ehci->actions)) start_unlink_async (ehci, ehci->async); /* ehci could run by timer, without IRQs ... */ ehci_work (ehci); spin_unlock_irqrestore (&ehci->lock, flags); } /* On some systems, leaving remote wakeup enabled prevents system shutdown. * The firmware seems to think that powering off is a wakeup event! * This routine turns off remote wakeup and everything else, on all ports. */ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) { int port = HCS_N_PORTS(ehci->hcs_params); while (port--) ehci_writel(ehci, PORT_RWC_BITS, &ehci->regs->port_status[port]); } /* ehci_shutdown kick in for silicon on any bus (not just pci, etc). * This forcibly disables dma and IRQs, helping kexec and other cases * where the next system software may expect clean state. */ static void ehci_shutdown (struct usb_hcd *hcd) { struct ehci_hcd *ehci; ehci = hcd_to_ehci (hcd); (void) ehci_halt (ehci); ehci_turn_off_all_ports(ehci); /* make BIOS/etc use companion controller during reboot */ ehci_writel(ehci, 0, &ehci->regs->configured_flag); /* unblock posted writes */ ehci_readl(ehci, &ehci->regs->configured_flag); } static void ehci_port_power (struct ehci_hcd *ehci, int is_on) { unsigned port; if (!HCS_PPC (ehci->hcs_params)) return; ehci_dbg (ehci, "...power%s ports...\n", is_on ? "up" : "down"); for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) (void) ehci_hub_control(ehci_to_hcd(ehci), is_on ? SetPortFeature : ClearPortFeature, USB_PORT_FEAT_POWER, port--, NULL, 0); /* Flush those writes */ ehci_readl(ehci, &ehci->regs->command); msleep(20); } /*-------------------------------------------------------------------------*/ /* * ehci_work is called from some interrupts, timers, and so on. * it calls driver completion functions, after dropping ehci->lock. */ static void ehci_work (struct ehci_hcd *ehci) { timer_action_done (ehci, TIMER_IO_WATCHDOG); /* another CPU may drop ehci->lock during a schedule scan while * it reports urb completions. this flag guards against bogus * attempts at re-entrant schedule scanning. */ if (ehci->scanning) return; ehci->scanning = 1; scan_async (ehci); if (ehci->next_uframe != -1) scan_periodic (ehci); ehci->scanning = 0; /* the IO watchdog guards against hardware or driver bugs that * misplace IRQs, and should let us run completely without IRQs. * such lossage has been observed on both VT6202 and VT8235. */ if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state) && (ehci->async->qh_next.ptr != NULL || ehci->periodic_sched != 0)) timer_action (ehci, TIMER_IO_WATCHDOG); } static void ehci_stop (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); ehci_dbg (ehci, "stop\n"); /* Turn off port power on all root hub ports. */ ehci_port_power (ehci, 0); /* no more interrupts ... */ del_timer_sync (&ehci->watchdog); del_timer_sync(&ehci->iaa_watchdog); spin_lock_irq(&ehci->lock); if (HC_IS_RUNNING (hcd->state)) ehci_quiesce (ehci); ehci_reset (ehci); ehci_writel(ehci, 0, &ehci->regs->intr_enable); spin_unlock_irq(&ehci->lock); /* let companion controllers work when we aren't */ ehci_writel(ehci, 0, &ehci->regs->configured_flag); remove_companion_file(ehci); remove_debug_files (ehci); /* root hub is shut down separately (first, when possible) */ spin_lock_irq (&ehci->lock); if (ehci->async) ehci_work (ehci); spin_unlock_irq (&ehci->lock); ehci_mem_cleanup (ehci); #ifdef EHCI_STATS ehci_dbg (ehci, "irq normal %ld err %ld reclaim %ld (lost %ld)\n", ehci->stats.normal, ehci->stats.error, ehci->stats.reclaim, ehci->stats.lost_iaa); ehci_dbg (ehci, "complete %ld unlink %ld\n", ehci->stats.complete, ehci->stats.unlink); #endif dbg_status (ehci, "ehci_stop completed", ehci_readl(ehci, &ehci->regs->status)); } /* one-time init, only for memory state */ static int ehci_init(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); u32 temp; int retval; u32 hcc_params; spin_lock_init(&ehci->lock); init_timer(&ehci->watchdog); ehci->watchdog.function = ehci_watchdog; ehci->watchdog.data = (unsigned long) ehci; init_timer(&ehci->iaa_watchdog); ehci->iaa_watchdog.function = ehci_iaa_watchdog; ehci->iaa_watchdog.data = (unsigned long) ehci; /* * hw default: 1K periodic list heads, one per frame. * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; /* controllers may cache some of the periodic schedule ... */ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); if (HCC_ISOC_CACHE(hcc_params)) // full frame cache ehci->i_thresh = 8; else // N microframes cached ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params); ehci->reclaim = NULL; ehci->next_uframe = -1; /* * dedicate a qh for the async ring head, since we couldn't unlink * a 'real' qh without stopping the async schedule [4.8]. use it * as the 'reclamation list head' too. * its dummy is used in hw_alt_next of many tds, to prevent the qh * from automatically advancing to the next td after short reads. */ ehci->async->qh_next.qh = NULL; ehci->async->hw_next = QH_NEXT(ehci, ehci->async->qh_dma); ehci->async->hw_info1 = cpu_to_hc32(ehci, QH_HEAD); ehci->async->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT); ehci->async->hw_qtd_next = EHCI_LIST_END(ehci); ehci->async->qh_state = QH_STATE_LINKED; ehci->async->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma); /* clear interrupt enables, set irq latency */ if (log2_irq_thresh < 0 || log2_irq_thresh > 6) log2_irq_thresh = 0; temp = 1 << (16 + log2_irq_thresh); if (HCC_CANPARK(hcc_params)) { /* HW default park == 3, on hardware that supports it (like * NVidia and ALI silicon), maximizes throughput on the async * schedule by avoiding QH fetches between transfers. * * With fast usb storage devices and NForce2, "park" seems to * make problems: throughput reduction (!), data errors... */ if (park) { park = min(park, (unsigned) 3); temp |= CMD_PARK; temp |= park << 8; } ehci_dbg(ehci, "park %d\n", park); } if (HCC_PGM_FRAMELISTLEN(hcc_params)) { /* periodic schedule size can be smaller than default */ temp &= ~(3 << 2); temp |= (EHCI_TUNE_FLS << 2); switch (EHCI_TUNE_FLS) { case 0: ehci->periodic_size = 1024; break; case 1: ehci->periodic_size = 512; break; case 2: ehci->periodic_size = 256; break; default: BUG(); } } ehci->command = temp; return 0; } /* start HC running; it's halted, ehci_init() has been run (once) */ static int ehci_run (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); int retval; u32 temp; u32 hcc_params; hcd->uses_new_polling = 1; hcd->poll_rh = 0; /* EHCI spec section 4.1 */ if ((retval = ehci_reset(ehci)) != 0) { ehci_mem_cleanup(ehci); return retval; } ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list); ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next); /* * hcc_params controls whether ehci->regs->segment must (!!!) * be used; it constrains QH/ITD/SITD and QTD locations. * pci_pool consistent memory always uses segment zero. * streaming mappings for I/O buffers, like pci_map_single(), * can return segments above 4GB, if the device allows. * * NOTE: the dma mask is visible through dma_supported(), so * drivers can pass this info along ... like NETIF_F_HIGHDMA, * Scsi_Host.highmem_io, and so forth. It's readonly to all * host side drivers though. */ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params); if (HCC_64BIT_ADDR(hcc_params)) { ehci_writel(ehci, 0, &ehci->regs->segment); #if 0 // this is deeply broken on almost all architectures if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK)) ehci_info(ehci, "enabled 64bit DMA\n"); #endif } // Philips, Intel, and maybe others need CMD_RUN before the // root hub will detect new devices (why?); NEC doesn't ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET); ehci->command |= CMD_RUN; ehci_writel(ehci, ehci->command, &ehci->regs->command); dbg_cmd (ehci, "init", ehci->command); /* * Start, enabling full USB 2.0 functionality ... usb 1.1 devices * are explicitly handed to companion controller(s), so no TT is * involved with the root hub. (Except where one is integrated, * and there's no companion controller unless maybe for USB OTG.) * * Turning on the CF flag will transfer ownership of all ports * from the companions to the EHCI controller. If any of the * companions are in the middle of a port reset at the time, it * could cause trouble. Write-locking ehci_cf_port_reset_rwsem * guarantees that no resets are in progress. After we set CF, * a short delay lets the hardware catch up; new resets shouldn't * be started before the port switching actions could complete. */ down_write(&ehci_cf_port_reset_rwsem); hcd->state = HC_STATE_RUNNING; ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag); ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); up_write(&ehci_cf_port_reset_rwsem); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci_info (ehci, "USB %x.%x started, EHCI %x.%02x, driver %s%s\n", ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), temp >> 8, temp & 0xff, DRIVER_VERSION, ignore_oc ? ", overcurrent ignored" : ""); ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */ /* GRR this is run-once init(), being done every time the HC starts. * So long as they're part of class devices, we can't do it init() * since the class device isn't created that early. */ create_debug_files(ehci); create_companion_file(ehci); return 0; } /*-------------------------------------------------------------------------*/ static irqreturn_t ehci_irq (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); u32 status, pcd_status = 0; int bh; spin_lock (&ehci->lock); status = ehci_readl(ehci, &ehci->regs->status); /* e.g. cardbus physical eject */ if (status == ~(u32) 0) { ehci_dbg (ehci, "device removed\n"); goto dead; } status &= INTR_MASK; if (!status) { /* irq sharing? */ spin_unlock(&ehci->lock); return IRQ_NONE; } /* clear (just) interrupts */ ehci_writel(ehci, status, &ehci->regs->status); ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */ bh = 0; #ifdef EHCI_VERBOSE_DEBUG /* unrequested/ignored: Frame List Rollover */ dbg_status (ehci, "irq", status); #endif /* INT, ERR, and IAA interrupt rates can be throttled */ /* normal [4.15.1.2] or error [4.15.1.1] completion */ if (likely ((status & (STS_INT|STS_ERR)) != 0)) { if (likely ((status & STS_ERR) == 0)) COUNT (ehci->stats.normal); else COUNT (ehci->stats.error); bh = 1; } /* complete the unlinking of some qh [4.15.2.3] */ if (status & STS_IAA) { COUNT (ehci->stats.reclaim); end_unlink_async(ehci); } /* remote wakeup [4.3.1] */ if (status & STS_PCD) { unsigned i = HCS_N_PORTS (ehci->hcs_params); pcd_status = status; /* resume root hub? */ if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN)) usb_hcd_resume_root_hub(hcd); while (i--) { int pstatus = ehci_readl(ehci, &ehci->regs->port_status [i]); if (pstatus & PORT_OWNER) continue; if (!(pstatus & PORT_RESUME) || ehci->reset_done [i] != 0) continue; /* start 20 msec resume signaling from this port, * and make khubd collect PORT_STAT_C_SUSPEND to * stop that signaling. */ ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } } /* PCI errors [4.15.2.4] */ if (unlikely ((status & STS_FATAL) != 0)) { /* bogus "fatal" IRQs appear on some chips... why? */ status = ehci_readl(ehci, &ehci->regs->status); dbg_cmd (ehci, "fatal", ehci_readl(ehci, &ehci->regs->command)); dbg_status (ehci, "fatal", status); if (status & STS_HALT) { ehci_err (ehci, "fatal error\n"); dead: ehci_reset (ehci); ehci_writel(ehci, 0, &ehci->regs->configured_flag); /* generic layer kills/unlinks all urbs, then * uses ehci_stop to clean up the rest */ bh = 1; } } if (bh) ehci_work (ehci); spin_unlock (&ehci->lock); if (pcd_status & STS_PCD) usb_hcd_poll_rh_status(hcd); return IRQ_HANDLED; } /*-------------------------------------------------------------------------*/ /* * non-error returns are a promise to giveback() the urb later * we drop ownership so next owner (or urb unlink) can get it * * urb + dev is in hcd.self.controller.urb_list * we're queueing TDs onto software and hardware lists * * hcd-specific init for hcpriv hasn't been done yet * * NOTE: control, bulk, and interrupt share the same code to append TDs * to a (possibly active) QH, and the same QH scanning code. */ static int ehci_urb_enqueue ( struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags ) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); struct list_head qtd_list; INIT_LIST_HEAD (&qtd_list); switch (usb_pipetype (urb->pipe)) { // case PIPE_CONTROL: // case PIPE_BULK: default: if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) return -ENOMEM; return submit_async(ehci, urb, &qtd_list, mem_flags); case PIPE_INTERRUPT: if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags)) return -ENOMEM; return intr_submit(ehci, urb, &qtd_list, mem_flags); case PIPE_ISOCHRONOUS: if (urb->dev->speed == USB_SPEED_HIGH) return itd_submit (ehci, urb, mem_flags); else return sitd_submit (ehci, urb, mem_flags); } } static void unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) { /* failfast */ if (!HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) end_unlink_async(ehci); /* if it's not linked then there's nothing to do */ if (qh->qh_state != QH_STATE_LINKED) ; /* defer till later if busy */ else if (ehci->reclaim) { struct ehci_qh *last; for (last = ehci->reclaim; last->reclaim; last = last->reclaim) continue; qh->qh_state = QH_STATE_UNLINK_WAIT; last->reclaim = qh; /* start IAA cycle */ } else start_unlink_async (ehci, qh); } /* remove from hardware lists * completions normally happen asynchronously */ static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); struct ehci_qh *qh; unsigned long flags; int rc; spin_lock_irqsave (&ehci->lock, flags); rc = usb_hcd_check_unlink_urb(hcd, urb, status); if (rc) goto done; switch (usb_pipetype (urb->pipe)) { // case PIPE_CONTROL: // case PIPE_BULK: default: qh = (struct ehci_qh *) urb->hcpriv; if (!qh) break; switch (qh->qh_state) { case QH_STATE_LINKED: case QH_STATE_COMPLETING: unlink_async(ehci, qh); break; case QH_STATE_UNLINK: case QH_STATE_UNLINK_WAIT: /* already started */ break; case QH_STATE_IDLE: WARN_ON(1); break; } break; case PIPE_INTERRUPT: qh = (struct ehci_qh *) urb->hcpriv; if (!qh) break; switch (qh->qh_state) { case QH_STATE_LINKED: intr_deschedule (ehci, qh); /* FALL THROUGH */ case QH_STATE_IDLE: qh_completions (ehci, qh); break; default: ehci_dbg (ehci, "bogus qh %p state %d\n", qh, qh->qh_state); goto done; } /* reschedule QH iff another request is queued */ if (!list_empty (&qh->qtd_list) && HC_IS_RUNNING (hcd->state)) { int schedule_status; schedule_status = qh_schedule (ehci, qh); spin_unlock_irqrestore (&ehci->lock, flags); if (schedule_status != 0) { // shouldn't happen often, but ... // FIXME kill those tds' urbs err ("can't reschedule qh %p, err %d", qh, schedule_status); } return status; } break; case PIPE_ISOCHRONOUS: // itd or sitd ... // wait till next completion, do it then. // completion irqs can wait up to 1024 msec, break; } done: spin_unlock_irqrestore (&ehci->lock, flags); return rc; } /*-------------------------------------------------------------------------*/ // bulk qh holds the data toggle static void ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); unsigned long flags; struct ehci_qh *qh, *tmp; /* ASSERT: any requests/urbs are being unlinked */ /* ASSERT: nobody can be submitting urbs for this any more */ rescan: spin_lock_irqsave (&ehci->lock, flags); qh = ep->hcpriv; if (!qh) goto done; /* endpoints can be iso streams. for now, we don't * accelerate iso completions ... so spin a while. */ if (qh->hw_info1 == 0) { ehci_vdbg (ehci, "iso delay\n"); goto idle_timeout; } if (!HC_IS_RUNNING (hcd->state)) qh->qh_state = QH_STATE_IDLE; switch (qh->qh_state) { case QH_STATE_LINKED: for (tmp = ehci->async->qh_next.qh; tmp && tmp != qh; tmp = tmp->qh_next.qh) continue; /* periodic qh self-unlinks on empty */ if (!tmp) goto nogood; unlink_async (ehci, qh); /* FALL THROUGH */ case QH_STATE_UNLINK: /* wait for hw to finish? */ case QH_STATE_UNLINK_WAIT: idle_timeout: spin_unlock_irqrestore (&ehci->lock, flags); schedule_timeout_uninterruptible(1); goto rescan; case QH_STATE_IDLE: /* fully unlinked */ if (list_empty (&qh->qtd_list)) { qh_put (qh); break; } /* else FALL THROUGH */ default: nogood: /* caller was supposed to have unlinked any requests; * that's not our job. just leak this memory. */ ehci_err (ehci, "qh %p (#%02x) state %d%s\n", qh, ep->desc.bEndpointAddress, qh->qh_state, list_empty (&qh->qtd_list) ? "" : "(has tds)"); break; } ep->hcpriv = NULL; done: spin_unlock_irqrestore (&ehci->lock, flags); return; } static int ehci_get_frame (struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci (hcd); return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) % ehci->periodic_size; } /*-------------------------------------------------------------------------*/ #define DRIVER_INFO DRIVER_VERSION " " DRIVER_DESC MODULE_DESCRIPTION (DRIVER_INFO); MODULE_AUTHOR (DRIVER_AUTHOR); MODULE_LICENSE ("GPL"); #ifdef CONFIG_PCI #include "ehci-pci.c" #define PCI_DRIVER ehci_pci_driver #endif #ifdef CONFIG_USB_EHCI_FSL #include "ehci-fsl.c" #define PLATFORM_DRIVER ehci_fsl_driver #endif #ifdef CONFIG_SOC_AU1200 #include "ehci-au1xxx.c" #define PLATFORM_DRIVER ehci_hcd_au1xxx_driver #endif #ifdef CONFIG_PPC_PS3 #include "ehci-ps3.c" #define PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver #endif #ifdef CONFIG_440EPX #include "ehci-ppc-soc.c" #define PLATFORM_DRIVER ehci_ppc_soc_driver #endif #ifdef CONFIG_ARCH_ORION #include "ehci-orion.c" #define PLATFORM_DRIVER ehci_orion_driver #endif #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) #error "missing bus glue for ehci-hcd" #endif static int __init ehci_hcd_init(void) { int retval = 0; pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n", hcd_name, sizeof(struct ehci_qh), sizeof(struct ehci_qtd), sizeof(struct ehci_itd), sizeof(struct ehci_sitd)); #ifdef DEBUG ehci_debug_root = debugfs_create_dir("ehci", NULL); if (!ehci_debug_root) return -ENOENT; #endif #ifdef PLATFORM_DRIVER retval = platform_driver_register(&PLATFORM_DRIVER); if (retval < 0) { #ifdef DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; #endif return retval; } #endif #ifdef PCI_DRIVER retval = pci_register_driver(&PCI_DRIVER); if (retval < 0) { #ifdef DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; #endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif return retval; } #endif #ifdef PS3_SYSTEM_BUS_DRIVER retval = ps3_ehci_driver_register(&PS3_SYSTEM_BUS_DRIVER); if (retval < 0) { #ifdef DEBUG debugfs_remove(ehci_debug_root); ehci_debug_root = NULL; #endif #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); #endif return retval; } #endif return retval; } module_init(ehci_hcd_init); static void __exit ehci_hcd_cleanup(void) { #ifdef PLATFORM_DRIVER platform_driver_unregister(&PLATFORM_DRIVER); #endif #ifdef PCI_DRIVER pci_unregister_driver(&PCI_DRIVER); #endif #ifdef PS3_SYSTEM_BUS_DRIVER ps3_ehci_driver_unregister(&PS3_SYSTEM_BUS_DRIVER); #endif #ifdef DEBUG debugfs_remove(ehci_debug_root); #endif } module_exit(ehci_hcd_cleanup);