/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2007 - 2014 Intel Corporation. All rights reserved. * Copyright (C) 2016 - 2017 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2005 - 2014 Intel Corporation. All rights reserved. * Copyright (C) 2016 - 2017 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __IWL_CONFIG_H__ #define __IWL_CONFIG_H__ #include #include #include #include enum iwl_device_family { IWL_DEVICE_FAMILY_UNDEFINED, IWL_DEVICE_FAMILY_1000, IWL_DEVICE_FAMILY_100, IWL_DEVICE_FAMILY_2000, IWL_DEVICE_FAMILY_2030, IWL_DEVICE_FAMILY_105, IWL_DEVICE_FAMILY_135, IWL_DEVICE_FAMILY_5000, IWL_DEVICE_FAMILY_5150, IWL_DEVICE_FAMILY_6000, IWL_DEVICE_FAMILY_6000i, IWL_DEVICE_FAMILY_6005, IWL_DEVICE_FAMILY_6030, IWL_DEVICE_FAMILY_6050, IWL_DEVICE_FAMILY_6150, IWL_DEVICE_FAMILY_7000, IWL_DEVICE_FAMILY_8000, }; /* * LED mode * IWL_LED_DEFAULT: use device default * IWL_LED_RF_STATE: turn LED on/off based on RF state * LED ON = RF ON * LED OFF = RF OFF * IWL_LED_BLINK: adjust led blink rate based on blink table * IWL_LED_DISABLE: led disabled */ enum iwl_led_mode { IWL_LED_DEFAULT, IWL_LED_RF_STATE, IWL_LED_BLINK, IWL_LED_DISABLE, }; /* * This is the threshold value of plcp error rate per 100mSecs. It is * used to set and check for the validity of plcp_delta. */ #define IWL_MAX_PLCP_ERR_THRESHOLD_MIN 1 #define IWL_MAX_PLCP_ERR_THRESHOLD_DEF 50 #define IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF 100 #define IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF 200 #define IWL_MAX_PLCP_ERR_THRESHOLD_MAX 255 #define IWL_MAX_PLCP_ERR_THRESHOLD_DISABLE 0 /* TX queue watchdog timeouts in mSecs */ #define IWL_WATCHDOG_DISABLED 0 #define IWL_DEF_WD_TIMEOUT 2500 #define IWL_LONG_WD_TIMEOUT 10000 #define IWL_MAX_WD_TIMEOUT 120000 #define IWL_DEFAULT_MAX_TX_POWER 22 #define IWL_TX_CSUM_NETIF_FLAGS (NETIF_F_IPV6_CSUM | NETIF_F_IP_CSUM |\ NETIF_F_TSO | NETIF_F_TSO6) /* Antenna presence definitions */ #define ANT_NONE 0x0 #define ANT_A BIT(0) #define ANT_B BIT(1) #define ANT_C BIT(2) #define ANT_AB (ANT_A | ANT_B) #define ANT_AC (ANT_A | ANT_C) #define ANT_BC (ANT_B | ANT_C) #define ANT_ABC (ANT_A | ANT_B | ANT_C) static inline u8 num_of_ant(u8 mask) { return !!((mask) & ANT_A) + !!((mask) & ANT_B) + !!((mask) & ANT_C); } /* * @max_ll_items: max number of OTP blocks * @shadow_ram_support: shadow support for OTP memory * @led_compensation: compensate on the led on/off time per HW according * to the deviation to achieve the desired led frequency. * The detail algorithm is described in iwl-led.c * @wd_timeout: TX queues watchdog timeout * @max_event_log_size: size of event log buffer size for ucode event logging * @shadow_reg_enable: HW shadow register support * @apmg_wake_up_wa: should the MAC access REQ be asserted when a command * is in flight. This is due to a HW bug in 7260, 3160 and 7265. * @scd_chain_ext_wa: should the chain extension feature in SCD be disabled. */ struct iwl_base_params { unsigned int wd_timeout; u16 eeprom_size; u16 max_event_log_size; u8 pll_cfg:1, /* for iwl_pcie_apm_init() */ shadow_ram_support:1, shadow_reg_enable:1, pcie_l1_allowed:1, apmg_wake_up_wa:1, scd_chain_ext_wa:1; u8 num_of_queues; /* def: HW dependent */ u8 max_ll_items; u8 led_compensation; }; /* * @stbc: support Tx STBC and 1*SS Rx STBC * @ldpc: support Tx/Rx with LDPC * @use_rts_for_aggregation: use rts/cts protection for HT traffic * @ht40_bands: bitmap of bands (using %NL80211_BAND_*) that support HT40 */ struct iwl_ht_params { u8 ht_greenfield_support:1, stbc:1, ldpc:1, use_rts_for_aggregation:1; u8 ht40_bands; }; /* * Tx-backoff threshold * @temperature: The threshold in Celsius * @backoff: The tx-backoff in uSec */ struct iwl_tt_tx_backoff { s32 temperature; u32 backoff; }; #define TT_TX_BACKOFF_SIZE 6 /** * struct iwl_tt_params - thermal throttling parameters * @ct_kill_entry: CT Kill entry threshold * @ct_kill_exit: CT Kill exit threshold * @ct_kill_duration: The time intervals (in uSec) in which the driver needs * to checks whether to exit CT Kill. * @dynamic_smps_entry: Dynamic SMPS entry threshold * @dynamic_smps_exit: Dynamic SMPS exit threshold * @tx_protection_entry: TX protection entry threshold * @tx_protection_exit: TX protection exit threshold * @tx_backoff: Array of thresholds for tx-backoff , in ascending order. * @support_ct_kill: Support CT Kill? * @support_dynamic_smps: Support dynamic SMPS? * @support_tx_protection: Support tx protection? * @support_tx_backoff: Support tx-backoff? */ struct iwl_tt_params { u32 ct_kill_entry; u32 ct_kill_exit; u32 ct_kill_duration; u32 dynamic_smps_entry; u32 dynamic_smps_exit; u32 tx_protection_entry; u32 tx_protection_exit; struct iwl_tt_tx_backoff tx_backoff[TT_TX_BACKOFF_SIZE]; u8 support_ct_kill:1, support_dynamic_smps:1, support_tx_protection:1, support_tx_backoff:1; }; /* * information on how to parse the EEPROM */ #define EEPROM_REG_BAND_1_CHANNELS 0x08 #define EEPROM_REG_BAND_2_CHANNELS 0x26 #define EEPROM_REG_BAND_3_CHANNELS 0x42 #define EEPROM_REG_BAND_4_CHANNELS 0x5C #define EEPROM_REG_BAND_5_CHANNELS 0x74 #define EEPROM_REG_BAND_24_HT40_CHANNELS 0x82 #define EEPROM_REG_BAND_52_HT40_CHANNELS 0x92 #define EEPROM_6000_REG_BAND_24_HT40_CHANNELS 0x80 #define EEPROM_REGULATORY_BAND_NO_HT40 0 /* lower blocks contain EEPROM image and calibration data */ #define OTP_LOW_IMAGE_SIZE (2 * 512 * sizeof(u16)) /* 2 KB */ #define OTP_LOW_IMAGE_SIZE_FAMILY_7000 (16 * 512 * sizeof(u16)) /* 16 KB */ #define OTP_LOW_IMAGE_SIZE_FAMILY_8000 (32 * 512 * sizeof(u16)) /* 32 KB */ #define OTP_LOW_IMAGE_SIZE_FAMILY_9000 OTP_LOW_IMAGE_SIZE_FAMILY_8000 #define OTP_LOW_IMAGE_SIZE_FAMILY_A000 OTP_LOW_IMAGE_SIZE_FAMILY_9000 struct iwl_eeprom_params { const u8 regulatory_bands[7]; bool enhanced_txpower; }; /* Tx-backoff power threshold * @pwr: The power limit in mw * @backoff: The tx-backoff in uSec */ struct iwl_pwr_tx_backoff { u32 pwr; u32 backoff; }; /** * struct iwl_cfg * @name: Official name of the device * @fw_name_pre: Firmware filename prefix. The api version and extension * (.ucode) will be added to filename before loading from disk. The * filename is constructed as fw_name_pre.ucode. * @fw_name_pre_next_step: same as @fw_name_pre, only for next step * (if supported) * @ucode_api_max: Highest version of uCode API supported by driver. * @ucode_api_min: Lowest version of uCode API supported by driver. * @max_inst_size: The maximal length of the fw inst section * @max_data_size: The maximal length of the fw data section * @valid_tx_ant: valid transmit antenna * @valid_rx_ant: valid receive antenna * @non_shared_ant: the antenna that is for WiFi only * @nvm_ver: NVM version * @nvm_calib_ver: NVM calibration version * @lib: pointer to the lib ops * @base_params: pointer to basic parameters * @ht_params: point to ht parameters * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) * @rx_with_siso_diversity: 1x1 device with rx antenna diversity * @internal_wimax_coex: internal wifi/wimax combo device * @high_temp: Is this NIC is designated to be in high temperature. * @host_interrupt_operation_mode: device needs host interrupt operation * mode set * @nvm_hw_section_num: the ID of the HW NVM section * @mac_addr_from_csr: read HW address from CSR registers * @features: hw features, any combination of feature_whitelist * @pwr_tx_backoffs: translation table between power limits and backoffs * @max_rx_agg_size: max RX aggregation size of the ADDBA request/response * @max_tx_agg_size: max TX aggregation size of the ADDBA request/response * @max_ht_ampdu_factor: the exponent of the max length of A-MPDU that the * station can receive in HT * @max_vht_ampdu_exponent: the exponent of the max length of A-MPDU that the * station can receive in VHT * @dccm_offset: offset from which DCCM begins * @dccm_len: length of DCCM (including runtime stack CCM) * @dccm2_offset: offset from which the second DCCM begins * @dccm2_len: length of the second DCCM * @smem_offset: offset from which the SMEM begins * @smem_len: the length of SMEM * @mq_rx_supported: multi-queue rx support * @vht_mu_mimo_supported: VHT MU-MIMO support * @rf_id: need to read rf_id to determine the firmware image * @integrated: discrete or integrated * @gen2: a000 and on transport operation * * We enable the driver to be backward compatible wrt. hardware features. * API differences in uCode shouldn't be handled here but through TLVs * and/or the uCode API version instead. */ struct iwl_cfg { /* params specific to an individual device within a device family */ const char *name; const char *fw_name_pre; const char *fw_name_pre_next_step; /* params not likely to change within a device family */ const struct iwl_base_params *base_params; /* params likely to change within a device family */ const struct iwl_ht_params *ht_params; const struct iwl_eeprom_params *eeprom_params; const struct iwl_pwr_tx_backoff *pwr_tx_backoffs; const char *default_nvm_file_B_step; const char *default_nvm_file_C_step; const struct iwl_tt_params *thermal_params; enum iwl_device_family device_family; enum iwl_led_mode led_mode; u32 max_data_size; u32 max_inst_size; netdev_features_t features; u32 dccm_offset; u32 dccm_len; u32 dccm2_offset; u32 dccm2_len; u32 smem_offset; u32 smem_len; u16 nvm_ver; u16 nvm_calib_ver; u16 rx_with_siso_diversity:1, bt_shared_single_ant:1, internal_wimax_coex:1, host_interrupt_operation_mode:1, high_temp:1, mac_addr_from_csr:1, lp_xtal_workaround:1, disable_dummy_notification:1, apmg_not_supported:1, mq_rx_supported:1, vht_mu_mimo_supported:1, rf_id:1, integrated:1, use_tfh:1, gen2:1; u8 valid_tx_ant; u8 valid_rx_ant; u8 non_shared_ant; u8 nvm_hw_section_num; u8 max_rx_agg_size; u8 max_tx_agg_size; u8 max_ht_ampdu_exponent; u8 max_vht_ampdu_exponent; u8 ucode_api_max; u8 ucode_api_min; }; /* * This list declares the config structures for all devices. */ #if IS_ENABLED(CONFIG_IWLDVM) extern const struct iwl_cfg iwl5300_agn_cfg; extern const struct iwl_cfg iwl5100_agn_cfg; extern const struct iwl_cfg iwl5350_agn_cfg; extern const struct iwl_cfg iwl5100_bgn_cfg; extern const struct iwl_cfg iwl5100_abg_cfg; extern const struct iwl_cfg iwl5150_agn_cfg; extern const struct iwl_cfg iwl5150_abg_cfg; extern const struct iwl_cfg iwl6005_2agn_cfg; extern const struct iwl_cfg iwl6005_2abg_cfg; extern const struct iwl_cfg iwl6005_2bg_cfg; extern const struct iwl_cfg iwl6005_2agn_sff_cfg; extern const struct iwl_cfg iwl6005_2agn_d_cfg; extern const struct iwl_cfg iwl6005_2agn_mow1_cfg; extern const struct iwl_cfg iwl6005_2agn_mow2_cfg; extern const struct iwl_cfg iwl1030_bgn_cfg; extern const struct iwl_cfg iwl1030_bg_cfg; extern const struct iwl_cfg iwl6030_2agn_cfg; extern const struct iwl_cfg iwl6030_2abg_cfg; extern const struct iwl_cfg iwl6030_2bgn_cfg; extern const struct iwl_cfg iwl6030_2bg_cfg; extern const struct iwl_cfg iwl6000i_2agn_cfg; extern const struct iwl_cfg iwl6000i_2abg_cfg; extern const struct iwl_cfg iwl6000i_2bg_cfg; extern const struct iwl_cfg iwl6000_3agn_cfg; extern const struct iwl_cfg iwl6050_2agn_cfg; extern const struct iwl_cfg iwl6050_2abg_cfg; extern const struct iwl_cfg iwl6150_bgn_cfg; extern const struct iwl_cfg iwl6150_bg_cfg; extern const struct iwl_cfg iwl1000_bgn_cfg; extern const struct iwl_cfg iwl1000_bg_cfg; extern const struct iwl_cfg iwl100_bgn_cfg; extern const struct iwl_cfg iwl100_bg_cfg; extern const struct iwl_cfg iwl130_bgn_cfg; extern const struct iwl_cfg iwl130_bg_cfg; extern const struct iwl_cfg iwl2000_2bgn_cfg; extern const struct iwl_cfg iwl2000_2bgn_d_cfg; extern const struct iwl_cfg iwl2030_2bgn_cfg; extern const struct iwl_cfg iwl6035_2agn_cfg; extern const struct iwl_cfg iwl6035_2agn_sff_cfg; extern const struct iwl_cfg iwl105_bgn_cfg; extern const struct iwl_cfg iwl105_bgn_d_cfg; extern const struct iwl_cfg iwl135_bgn_cfg; #endif /* CONFIG_IWLDVM */ #if IS_ENABLED(CONFIG_IWLMVM) extern const struct iwl_cfg iwl7260_2ac_cfg; extern const struct iwl_cfg iwl7260_2ac_cfg_high_temp; extern const struct iwl_cfg iwl7260_2n_cfg; extern const struct iwl_cfg iwl7260_n_cfg; extern const struct iwl_cfg iwl3160_2ac_cfg; extern const struct iwl_cfg iwl3160_2n_cfg; extern const struct iwl_cfg iwl3160_n_cfg; extern const struct iwl_cfg iwl3165_2ac_cfg; extern const struct iwl_cfg iwl3168_2ac_cfg; extern const struct iwl_cfg iwl7265_2ac_cfg; extern const struct iwl_cfg iwl7265_2n_cfg; extern const struct iwl_cfg iwl7265_n_cfg; extern const struct iwl_cfg iwl7265d_2ac_cfg; extern const struct iwl_cfg iwl7265d_2n_cfg; extern const struct iwl_cfg iwl7265d_n_cfg; extern const struct iwl_cfg iwl8260_2n_cfg; extern const struct iwl_cfg iwl8260_2ac_cfg; extern const struct iwl_cfg iwl8265_2ac_cfg; extern const struct iwl_cfg iwl8275_2ac_cfg; extern const struct iwl_cfg iwl4165_2ac_cfg; extern const struct iwl_cfg iwl8260_2ac_sdio_cfg; extern const struct iwl_cfg iwl8265_2ac_sdio_cfg; extern const struct iwl_cfg iwl4165_2ac_sdio_cfg; extern const struct iwl_cfg iwl9160_2ac_cfg; extern const struct iwl_cfg iwl9260_2ac_cfg; extern const struct iwl_cfg iwl9270_2ac_cfg; extern const struct iwl_cfg iwl9460_2ac_cfg; extern const struct iwl_cfg iwl9560_2ac_cfg; extern const struct iwl_cfg iwla000_2ac_cfg_hr; extern const struct iwl_cfg iwla000_2ac_cfg_jf; #endif /* CONFIG_IWLMVM */ #endif /* __IWL_CONFIG_H__ */