/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 Intel Deutschland GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * Copyright(c) 2013 - 2015 Intel Mobile Communications GmbH * Copyright(c) 2016 Intel Deutschland GmbH * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __fw_api_h__ #define __fw_api_h__ #include "fw-api-rs.h" #include "fw-api-rx.h" #include "fw-api-tx.h" #include "fw-api-sta.h" #include "fw-api-mac.h" #include "fw-api-power.h" #include "fw-api-d3.h" #include "fw-api-coex.h" #include "fw-api-scan.h" #include "fw-api-stats.h" #include "fw-api-tof.h" /* Tx queue numbers for non-DQA mode */ enum { IWL_MVM_OFFCHANNEL_QUEUE = 8, IWL_MVM_CMD_QUEUE = 9, }; /* * DQA queue numbers * * @IWL_MVM_DQA_CMD_QUEUE: a queue reserved for sending HCMDs to the FW * @IWL_MVM_DQA_AUX_QUEUE: a queue reserved for aux frames * @IWL_MVM_DQA_P2P_DEVICE_QUEUE: a queue reserved for P2P device frames * @IWL_MVM_DQA_GCAST_QUEUE: a queue reserved for P2P GO/SoftAP GCAST frames * @IWL_MVM_DQA_BSS_CLIENT_QUEUE: a queue reserved for BSS activity, to ensure * that we are never left without the possibility to connect to an AP. * @IWL_MVM_DQA_MIN_MGMT_QUEUE: first TXQ in pool for MGMT and non-QOS frames. * Each MGMT queue is mapped to a single STA * MGMT frames are frames that return true on ieee80211_is_mgmt() * @IWL_MVM_DQA_MAX_MGMT_QUEUE: last TXQ in pool for MGMT frames * @IWL_MVM_DQA_AP_PROBE_RESP_QUEUE: a queue reserved for P2P GO/SoftAP probe * responses * @IWL_MVM_DQA_MIN_DATA_QUEUE: first TXQ in pool for DATA frames. * DATA frames are intended for !ieee80211_is_mgmt() frames, but if * the MGMT TXQ pool is exhausted, mgmt frames can be sent on DATA queues * as well * @IWL_MVM_DQA_MAX_DATA_QUEUE: last TXQ in pool for DATA frames */ enum iwl_mvm_dqa_txq { IWL_MVM_DQA_CMD_QUEUE = 0, IWL_MVM_DQA_AUX_QUEUE = 1, IWL_MVM_DQA_P2P_DEVICE_QUEUE = 2, IWL_MVM_DQA_GCAST_QUEUE = 3, IWL_MVM_DQA_BSS_CLIENT_QUEUE = 4, IWL_MVM_DQA_MIN_MGMT_QUEUE = 5, IWL_MVM_DQA_MAX_MGMT_QUEUE = 8, IWL_MVM_DQA_AP_PROBE_RESP_QUEUE = 9, IWL_MVM_DQA_MIN_DATA_QUEUE = 10, IWL_MVM_DQA_MAX_DATA_QUEUE = 31, }; enum iwl_mvm_tx_fifo { IWL_MVM_TX_FIFO_BK = 0, IWL_MVM_TX_FIFO_BE, IWL_MVM_TX_FIFO_VI, IWL_MVM_TX_FIFO_VO, IWL_MVM_TX_FIFO_MCAST = 5, IWL_MVM_TX_FIFO_CMD = 7, }; /* commands */ enum { MVM_ALIVE = 0x1, REPLY_ERROR = 0x2, ECHO_CMD = 0x3, INIT_COMPLETE_NOTIF = 0x4, /* PHY context commands */ PHY_CONTEXT_CMD = 0x8, DBG_CFG = 0x9, ANTENNA_COUPLING_NOTIFICATION = 0xa, /* UMAC scan commands */ SCAN_ITERATION_COMPLETE_UMAC = 0xb5, SCAN_CFG_CMD = 0xc, SCAN_REQ_UMAC = 0xd, SCAN_ABORT_UMAC = 0xe, SCAN_COMPLETE_UMAC = 0xf, BA_WINDOW_STATUS_NOTIFICATION_ID = 0x13, /* station table */ ADD_STA_KEY = 0x17, ADD_STA = 0x18, REMOVE_STA = 0x19, /* paging get item */ FW_GET_ITEM_CMD = 0x1a, /* TX */ TX_CMD = 0x1c, TXPATH_FLUSH = 0x1e, MGMT_MCAST_KEY = 0x1f, /* scheduler config */ SCD_QUEUE_CFG = 0x1d, /* global key */ WEP_KEY = 0x20, /* Memory */ SHARED_MEM_CFG = 0x25, /* TDLS */ TDLS_CHANNEL_SWITCH_CMD = 0x27, TDLS_CHANNEL_SWITCH_NOTIFICATION = 0xaa, TDLS_CONFIG_CMD = 0xa7, /* MAC and Binding commands */ MAC_CONTEXT_CMD = 0x28, TIME_EVENT_CMD = 0x29, /* both CMD and response */ TIME_EVENT_NOTIFICATION = 0x2a, BINDING_CONTEXT_CMD = 0x2b, TIME_QUOTA_CMD = 0x2c, NON_QOS_TX_COUNTER_CMD = 0x2d, LQ_CMD = 0x4e, /* paging block to FW cpu2 */ FW_PAGING_BLOCK_CMD = 0x4f, /* Scan offload */ SCAN_OFFLOAD_REQUEST_CMD = 0x51, SCAN_OFFLOAD_ABORT_CMD = 0x52, HOT_SPOT_CMD = 0x53, SCAN_OFFLOAD_COMPLETE = 0x6D, SCAN_OFFLOAD_UPDATE_PROFILES_CMD = 0x6E, SCAN_OFFLOAD_CONFIG_CMD = 0x6f, MATCH_FOUND_NOTIFICATION = 0xd9, SCAN_ITERATION_COMPLETE = 0xe7, /* Phy */ PHY_CONFIGURATION_CMD = 0x6a, CALIB_RES_NOTIF_PHY_DB = 0x6b, /* PHY_DB_CMD = 0x6c, */ /* ToF - 802.11mc FTM */ TOF_CMD = 0x10, TOF_NOTIFICATION = 0x11, /* Power - legacy power table command */ POWER_TABLE_CMD = 0x77, PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78, LTR_CONFIG = 0xee, /* Thermal Throttling*/ REPLY_THERMAL_MNG_BACKOFF = 0x7e, /* Set/Get DC2DC frequency tune */ DC2DC_CONFIG_CMD = 0x83, /* NVM */ NVM_ACCESS_CMD = 0x88, SET_CALIB_DEFAULT_CMD = 0x8e, BEACON_NOTIFICATION = 0x90, BEACON_TEMPLATE_CMD = 0x91, TX_ANT_CONFIGURATION_CMD = 0x98, STATISTICS_CMD = 0x9c, STATISTICS_NOTIFICATION = 0x9d, EOSP_NOTIFICATION = 0x9e, REDUCE_TX_POWER_CMD = 0x9f, /* RF-KILL commands and notifications */ CARD_STATE_CMD = 0xa0, CARD_STATE_NOTIFICATION = 0xa1, MISSED_BEACONS_NOTIFICATION = 0xa2, /* Power - new power table command */ MAC_PM_POWER_TABLE = 0xa9, MFUART_LOAD_NOTIFICATION = 0xb1, RSS_CONFIG_CMD = 0xb3, REPLY_RX_PHY_CMD = 0xc0, REPLY_RX_MPDU_CMD = 0xc1, FRAME_RELEASE = 0xc3, BA_NOTIF = 0xc5, /* Location Aware Regulatory */ MCC_UPDATE_CMD = 0xc8, MCC_CHUB_UPDATE_CMD = 0xc9, MARKER_CMD = 0xcb, /* BT Coex */ BT_COEX_PRIO_TABLE = 0xcc, BT_COEX_PROT_ENV = 0xcd, BT_PROFILE_NOTIFICATION = 0xce, BT_CONFIG = 0x9b, BT_COEX_UPDATE_SW_BOOST = 0x5a, BT_COEX_UPDATE_CORUN_LUT = 0x5b, BT_COEX_UPDATE_REDUCED_TXP = 0x5c, BT_COEX_CI = 0x5d, REPLY_SF_CFG_CMD = 0xd1, REPLY_BEACON_FILTERING_CMD = 0xd2, /* DTS measurements */ CMD_DTS_MEASUREMENT_TRIGGER = 0xdc, DTS_MEASUREMENT_NOTIFICATION = 0xdd, REPLY_DEBUG_CMD = 0xf0, LDBG_CONFIG_CMD = 0xf6, DEBUG_LOG_MSG = 0xf7, BCAST_FILTER_CMD = 0xcf, MCAST_FILTER_CMD = 0xd0, /* D3 commands/notifications */ D3_CONFIG_CMD = 0xd3, PROT_OFFLOAD_CONFIG_CMD = 0xd4, OFFLOADS_QUERY_CMD = 0xd5, REMOTE_WAKE_CONFIG_CMD = 0xd6, D0I3_END_CMD = 0xed, /* for WoWLAN in particular */ WOWLAN_PATTERNS = 0xe0, WOWLAN_CONFIGURATION = 0xe1, WOWLAN_TSC_RSC_PARAM = 0xe2, WOWLAN_TKIP_PARAM = 0xe3, WOWLAN_KEK_KCK_MATERIAL = 0xe4, WOWLAN_GET_STATUSES = 0xe5, WOWLAN_TX_POWER_PER_DB = 0xe6, /* and for NetDetect */ SCAN_OFFLOAD_PROFILES_QUERY_CMD = 0x56, SCAN_OFFLOAD_HOTSPOTS_CONFIG_CMD = 0x58, SCAN_OFFLOAD_HOTSPOTS_QUERY_CMD = 0x59, REPLY_MAX = 0xff, }; /* Please keep this enum *SORTED* by hex value. * Needed for binary search, otherwise a warning will be triggered. */ enum iwl_mac_conf_subcmd_ids { LINK_QUALITY_MEASUREMENT_CMD = 0x1, LINK_QUALITY_MEASUREMENT_COMPLETE_NOTIF = 0xFE, CHANNEL_SWITCH_NOA_NOTIF = 0xFF, }; enum iwl_phy_ops_subcmd_ids { CMD_DTS_MEASUREMENT_TRIGGER_WIDE = 0x0, CTDP_CONFIG_CMD = 0x03, TEMP_REPORTING_THRESHOLDS_CMD = 0x04, CT_KILL_NOTIFICATION = 0xFE, DTS_MEASUREMENT_NOTIF_WIDE = 0xFF, }; enum iwl_system_subcmd_ids { SHARED_MEM_CFG_CMD = 0x0, }; enum iwl_data_path_subcmd_ids { DQA_ENABLE_CMD = 0x0, UPDATE_MU_GROUPS_CMD = 0x1, TRIGGER_RX_QUEUES_NOTIF_CMD = 0x2, MU_GROUP_MGMT_NOTIF = 0xFE, RX_QUEUES_NOTIFICATION = 0xFF, }; enum iwl_prot_offload_subcmd_ids { STORED_BEACON_NTF = 0xFF, }; /* command groups */ enum { LEGACY_GROUP = 0x0, LONG_GROUP = 0x1, SYSTEM_GROUP = 0x2, MAC_CONF_GROUP = 0x3, PHY_OPS_GROUP = 0x4, DATA_PATH_GROUP = 0x5, PROT_OFFLOAD_GROUP = 0xb, }; /** * struct iwl_cmd_response - generic response struct for most commands * @status: status of the command asked, changes for each one */ struct iwl_cmd_response { __le32 status; }; /* * struct iwl_dqa_enable_cmd * @cmd_queue: the TXQ number of the command queue */ struct iwl_dqa_enable_cmd { __le32 cmd_queue; } __packed; /* DQA_CONTROL_CMD_API_S_VER_1 */ /* * struct iwl_tx_ant_cfg_cmd * @valid: valid antenna configuration */ struct iwl_tx_ant_cfg_cmd { __le32 valid; } __packed; /* * Calibration control struct. * Sent as part of the phy configuration command. * @flow_trigger: bitmap for which calibrations to perform according to * flow triggers. * @event_trigger: bitmap for which calibrations to perform according to * event triggers. */ struct iwl_calib_ctrl { __le32 flow_trigger; __le32 event_trigger; } __packed; /* This enum defines the bitmap of various calibrations to enable in both * init ucode and runtime ucode through CALIBRATION_CFG_CMD. */ enum iwl_calib_cfg { IWL_CALIB_CFG_XTAL_IDX = BIT(0), IWL_CALIB_CFG_TEMPERATURE_IDX = BIT(1), IWL_CALIB_CFG_VOLTAGE_READ_IDX = BIT(2), IWL_CALIB_CFG_PAPD_IDX = BIT(3), IWL_CALIB_CFG_TX_PWR_IDX = BIT(4), IWL_CALIB_CFG_DC_IDX = BIT(5), IWL_CALIB_CFG_BB_FILTER_IDX = BIT(6), IWL_CALIB_CFG_LO_LEAKAGE_IDX = BIT(7), IWL_CALIB_CFG_TX_IQ_IDX = BIT(8), IWL_CALIB_CFG_TX_IQ_SKEW_IDX = BIT(9), IWL_CALIB_CFG_RX_IQ_IDX = BIT(10), IWL_CALIB_CFG_RX_IQ_SKEW_IDX = BIT(11), IWL_CALIB_CFG_SENSITIVITY_IDX = BIT(12), IWL_CALIB_CFG_CHAIN_NOISE_IDX = BIT(13), IWL_CALIB_CFG_DISCONNECTED_ANT_IDX = BIT(14), IWL_CALIB_CFG_ANT_COUPLING_IDX = BIT(15), IWL_CALIB_CFG_DAC_IDX = BIT(16), IWL_CALIB_CFG_ABS_IDX = BIT(17), IWL_CALIB_CFG_AGC_IDX = BIT(18), }; /* * Phy configuration command. */ struct iwl_phy_cfg_cmd { __le32 phy_cfg; struct iwl_calib_ctrl calib_control; } __packed; #define PHY_CFG_RADIO_TYPE (BIT(0) | BIT(1)) #define PHY_CFG_RADIO_STEP (BIT(2) | BIT(3)) #define PHY_CFG_RADIO_DASH (BIT(4) | BIT(5)) #define PHY_CFG_PRODUCT_NUMBER (BIT(6) | BIT(7)) #define PHY_CFG_TX_CHAIN_A BIT(8) #define PHY_CFG_TX_CHAIN_B BIT(9) #define PHY_CFG_TX_CHAIN_C BIT(10) #define PHY_CFG_RX_CHAIN_A BIT(12) #define PHY_CFG_RX_CHAIN_B BIT(13) #define PHY_CFG_RX_CHAIN_C BIT(14) /* Target of the NVM_ACCESS_CMD */ enum { NVM_ACCESS_TARGET_CACHE = 0, NVM_ACCESS_TARGET_OTP = 1, NVM_ACCESS_TARGET_EEPROM = 2, }; /* Section types for NVM_ACCESS_CMD */ enum { NVM_SECTION_TYPE_SW = 1, NVM_SECTION_TYPE_REGULATORY = 3, NVM_SECTION_TYPE_CALIBRATION = 4, NVM_SECTION_TYPE_PRODUCTION = 5, NVM_SECTION_TYPE_MAC_OVERRIDE = 11, NVM_SECTION_TYPE_PHY_SKU = 12, NVM_MAX_NUM_SECTIONS = 13, }; /** * struct iwl_nvm_access_cmd_ver2 - Request the device to send an NVM section * @op_code: 0 - read, 1 - write * @target: NVM_ACCESS_TARGET_* * @type: NVM_SECTION_TYPE_* * @offset: offset in bytes into the section * @length: in bytes, to read/write * @data: if write operation, the data to write. On read its empty */ struct iwl_nvm_access_cmd { u8 op_code; u8 target; __le16 type; __le16 offset; __le16 length; u8 data[]; } __packed; /* NVM_ACCESS_CMD_API_S_VER_2 */ #define NUM_OF_FW_PAGING_BLOCKS 33 /* 32 for data and 1 block for CSS */ /* * struct iwl_fw_paging_cmd - paging layout * * (FW_PAGING_BLOCK_CMD = 0x4f) * * Send to FW the paging layout in the driver. * * @flags: various flags for the command * @block_size: the block size in powers of 2 * @block_num: number of blocks specified in the command. * @device_phy_addr: virtual addresses from device side * 32 bit address for API version 1, 64 bit address for API version 2. */ struct iwl_fw_paging_cmd { __le32 flags; __le32 block_size; __le32 block_num; union { __le32 addr32[NUM_OF_FW_PAGING_BLOCKS]; __le64 addr64[NUM_OF_FW_PAGING_BLOCKS]; } device_phy_addr; } __packed; /* FW_PAGING_BLOCK_CMD_API_S_VER_2 */ /* * Fw items ID's * * @IWL_FW_ITEM_ID_PAGING: Address of the pages that the FW will upload * download */ enum iwl_fw_item_id { IWL_FW_ITEM_ID_PAGING = 3, }; /* * struct iwl_fw_get_item_cmd - get an item from the fw */ struct iwl_fw_get_item_cmd { __le32 item_id; } __packed; /* FW_GET_ITEM_CMD_API_S_VER_1 */ #define CONT_REC_COMMAND_SIZE 80 #define ENABLE_CONT_RECORDING 0x15 #define DISABLE_CONT_RECORDING 0x16 /* * struct iwl_continuous_record_mode - recording mode */ struct iwl_continuous_record_mode { __le16 enable_recording; } __packed; /* * struct iwl_continuous_record_cmd - enable/disable continuous recording */ struct iwl_continuous_record_cmd { struct iwl_continuous_record_mode record_mode; u8 pad[CONT_REC_COMMAND_SIZE - sizeof(struct iwl_continuous_record_mode)]; } __packed; struct iwl_fw_get_item_resp { __le32 item_id; __le32 item_byte_cnt; __le32 item_val; } __packed; /* FW_GET_ITEM_RSP_S_VER_1 */ /** * struct iwl_nvm_access_resp_ver2 - response to NVM_ACCESS_CMD * @offset: offset in bytes into the section * @length: in bytes, either how much was written or read * @type: NVM_SECTION_TYPE_* * @status: 0 for success, fail otherwise * @data: if read operation, the data returned. Empty on write. */ struct iwl_nvm_access_resp { __le16 offset; __le16 length; __le16 type; __le16 status; u8 data[]; } __packed; /* NVM_ACCESS_CMD_RESP_API_S_VER_2 */ /* MVM_ALIVE 0x1 */ /* alive response is_valid values */ #define ALIVE_RESP_UCODE_OK BIT(0) #define ALIVE_RESP_RFKILL BIT(1) /* alive response ver_type values */ enum { FW_TYPE_HW = 0, FW_TYPE_PROT = 1, FW_TYPE_AP = 2, FW_TYPE_WOWLAN = 3, FW_TYPE_TIMING = 4, FW_TYPE_WIPAN = 5 }; /* alive response ver_subtype values */ enum { FW_SUBTYPE_FULL_FEATURE = 0, FW_SUBTYPE_BOOTSRAP = 1, /* Not valid */ FW_SUBTYPE_REDUCED = 2, FW_SUBTYPE_ALIVE_ONLY = 3, FW_SUBTYPE_WOWLAN = 4, FW_SUBTYPE_AP_SUBTYPE = 5, FW_SUBTYPE_WIPAN = 6, FW_SUBTYPE_INITIALIZE = 9 }; #define IWL_ALIVE_STATUS_ERR 0xDEAD #define IWL_ALIVE_STATUS_OK 0xCAFE #define IWL_ALIVE_FLG_RFKILL BIT(0) struct mvm_alive_resp_ver1 { __le16 status; __le16 flags; u8 ucode_minor; u8 ucode_major; __le16 id; u8 api_minor; u8 api_major; u8 ver_subtype; u8 ver_type; u8 mac; u8 opt; __le16 reserved2; __le32 timestamp; __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 log_event_table_ptr; /* SRAM address for event log */ __le32 cpu_register_ptr; __le32 dbgm_config_ptr; __le32 alive_counter_ptr; __le32 scd_base_ptr; /* SRAM address for SCD */ } __packed; /* ALIVE_RES_API_S_VER_1 */ struct mvm_alive_resp_ver2 { __le16 status; __le16 flags; u8 ucode_minor; u8 ucode_major; __le16 id; u8 api_minor; u8 api_major; u8 ver_subtype; u8 ver_type; u8 mac; u8 opt; __le16 reserved2; __le32 timestamp; __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ __le32 cpu_register_ptr; __le32 dbgm_config_ptr; __le32 alive_counter_ptr; __le32 scd_base_ptr; /* SRAM address for SCD */ __le32 st_fwrd_addr; /* pointer to Store and forward */ __le32 st_fwrd_size; u8 umac_minor; /* UMAC version: minor */ u8 umac_major; /* UMAC version: major */ __le16 umac_id; /* UMAC version: id */ __le32 error_info_addr; /* SRAM address for UMAC error log */ __le32 dbg_print_buff_addr; } __packed; /* ALIVE_RES_API_S_VER_2 */ struct mvm_alive_resp { __le16 status; __le16 flags; __le32 ucode_minor; __le32 ucode_major; u8 ver_subtype; u8 ver_type; u8 mac; u8 opt; __le32 timestamp; __le32 error_event_table_ptr; /* SRAM address for error log */ __le32 log_event_table_ptr; /* SRAM address for LMAC event log */ __le32 cpu_register_ptr; __le32 dbgm_config_ptr; __le32 alive_counter_ptr; __le32 scd_base_ptr; /* SRAM address for SCD */ __le32 st_fwrd_addr; /* pointer to Store and forward */ __le32 st_fwrd_size; __le32 umac_minor; /* UMAC version: minor */ __le32 umac_major; /* UMAC version: major */ __le32 error_info_addr; /* SRAM address for UMAC error log */ __le32 dbg_print_buff_addr; } __packed; /* ALIVE_RES_API_S_VER_3 */ /* Error response/notification */ enum { FW_ERR_UNKNOWN_CMD = 0x0, FW_ERR_INVALID_CMD_PARAM = 0x1, FW_ERR_SERVICE = 0x2, FW_ERR_ARC_MEMORY = 0x3, FW_ERR_ARC_CODE = 0x4, FW_ERR_WATCH_DOG = 0x5, FW_ERR_WEP_GRP_KEY_INDX = 0x10, FW_ERR_WEP_KEY_SIZE = 0x11, FW_ERR_OBSOLETE_FUNC = 0x12, FW_ERR_UNEXPECTED = 0xFE, FW_ERR_FATAL = 0xFF }; /** * struct iwl_error_resp - FW error indication * ( REPLY_ERROR = 0x2 ) * @error_type: one of FW_ERR_* * @cmd_id: the command ID for which the error occured * @bad_cmd_seq_num: sequence number of the erroneous command * @error_service: which service created the error, applicable only if * error_type = 2, otherwise 0 * @timestamp: TSF in usecs. */ struct iwl_error_resp { __le32 error_type; u8 cmd_id; u8 reserved1; __le16 bad_cmd_seq_num; __le32 error_service; __le64 timestamp; } __packed; /* Common PHY, MAC and Bindings definitions */ #define MAX_MACS_IN_BINDING (3) #define MAX_BINDINGS (4) #define AUX_BINDING_INDEX (3) #define MAX_PHYS (4) /* Used to extract ID and color from the context dword */ #define FW_CTXT_ID_POS (0) #define FW_CTXT_ID_MSK (0xff << FW_CTXT_ID_POS) #define FW_CTXT_COLOR_POS (8) #define FW_CTXT_COLOR_MSK (0xff << FW_CTXT_COLOR_POS) #define FW_CTXT_INVALID (0xffffffff) #define FW_CMD_ID_AND_COLOR(_id, _color) ((_id << FW_CTXT_ID_POS) |\ (_color << FW_CTXT_COLOR_POS)) /* Possible actions on PHYs, MACs and Bindings */ enum { FW_CTXT_ACTION_STUB = 0, FW_CTXT_ACTION_ADD, FW_CTXT_ACTION_MODIFY, FW_CTXT_ACTION_REMOVE, FW_CTXT_ACTION_NUM }; /* COMMON_CONTEXT_ACTION_API_E_VER_1 */ /* Time Events */ /* Time Event types, according to MAC type */ enum iwl_time_event_type { /* BSS Station Events */ TE_BSS_STA_AGGRESSIVE_ASSOC, TE_BSS_STA_ASSOC, TE_BSS_EAP_DHCP_PROT, TE_BSS_QUIET_PERIOD, /* P2P Device Events */ TE_P2P_DEVICE_DISCOVERABLE, TE_P2P_DEVICE_LISTEN, TE_P2P_DEVICE_ACTION_SCAN, TE_P2P_DEVICE_FULL_SCAN, /* P2P Client Events */ TE_P2P_CLIENT_AGGRESSIVE_ASSOC, TE_P2P_CLIENT_ASSOC, TE_P2P_CLIENT_QUIET_PERIOD, /* P2P GO Events */ TE_P2P_GO_ASSOC_PROT, TE_P2P_GO_REPETITIVET_NOA, TE_P2P_GO_CT_WINDOW, /* WiDi Sync Events */ TE_WIDI_TX_SYNC, /* Channel Switch NoA */ TE_CHANNEL_SWITCH_PERIOD, TE_MAX }; /* MAC_EVENT_TYPE_API_E_VER_1 */ /* Time event - defines for command API v1 */ /* * @TE_V1_FRAG_NONE: fragmentation of the time event is NOT allowed. * @TE_V1_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @TE_V1_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @TE_V1_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ enum { TE_V1_FRAG_NONE = 0, TE_V1_FRAG_SINGLE = 1, TE_V1_FRAG_DUAL = 2, TE_V1_FRAG_ENDLESS = 0xffffffff }; /* If a Time Event can be fragmented, this is the max number of fragments */ #define TE_V1_FRAG_MAX_MSK 0x0fffffff /* Repeat the time event endlessly (until removed) */ #define TE_V1_REPEAT_ENDLESS 0xffffffff /* If a Time Event has bounded repetitions, this is the maximal value */ #define TE_V1_REPEAT_MAX_MSK_V1 0x0fffffff /* Time Event dependencies: none, on another TE, or in a specific time */ enum { TE_V1_INDEPENDENT = 0, TE_V1_DEP_OTHER = BIT(0), TE_V1_DEP_TSF = BIT(1), TE_V1_EVENT_SOCIOPATHIC = BIT(2), }; /* MAC_EVENT_DEPENDENCY_POLICY_API_E_VER_2 */ /* * @TE_V1_NOTIF_NONE: no notifications * @TE_V1_NOTIF_HOST_EVENT_START: request/receive notification on event start * @TE_V1_NOTIF_HOST_EVENT_END:request/receive notification on event end * @TE_V1_NOTIF_INTERNAL_EVENT_START: internal FW use * @TE_V1_NOTIF_INTERNAL_EVENT_END: internal FW use. * @TE_V1_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @TE_V1_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @TE_V1_NOTIF_INTERNAL_FRAG_START: internal FW use. * @TE_V1_NOTIF_INTERNAL_FRAG_END: internal FW use. * * Supported Time event notifications configuration. * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. */ enum { TE_V1_NOTIF_NONE = 0, TE_V1_NOTIF_HOST_EVENT_START = BIT(0), TE_V1_NOTIF_HOST_EVENT_END = BIT(1), TE_V1_NOTIF_INTERNAL_EVENT_START = BIT(2), TE_V1_NOTIF_INTERNAL_EVENT_END = BIT(3), TE_V1_NOTIF_HOST_FRAG_START = BIT(4), TE_V1_NOTIF_HOST_FRAG_END = BIT(5), TE_V1_NOTIF_INTERNAL_FRAG_START = BIT(6), TE_V1_NOTIF_INTERNAL_FRAG_END = BIT(7), }; /* MAC_EVENT_ACTION_API_E_VER_2 */ /* Time event - defines for command API */ /* * @TE_V2_FRAG_NONE: fragmentation of the time event is NOT allowed. * @TE_V2_FRAG_SINGLE: fragmentation of the time event is allowed, but only * the first fragment is scheduled. * @TE_V2_FRAG_DUAL: fragmentation of the time event is allowed, but only * the first 2 fragments are scheduled. * @TE_V2_FRAG_ENDLESS: fragmentation of the time event is allowed, and any * number of fragments are valid. * * Other than the constant defined above, specifying a fragmentation value 'x' * means that the event can be fragmented but only the first 'x' will be * scheduled. */ enum { TE_V2_FRAG_NONE = 0, TE_V2_FRAG_SINGLE = 1, TE_V2_FRAG_DUAL = 2, TE_V2_FRAG_MAX = 0xfe, TE_V2_FRAG_ENDLESS = 0xff }; /* Repeat the time event endlessly (until removed) */ #define TE_V2_REPEAT_ENDLESS 0xff /* If a Time Event has bounded repetitions, this is the maximal value */ #define TE_V2_REPEAT_MAX 0xfe #define TE_V2_PLACEMENT_POS 12 #define TE_V2_ABSENCE_POS 15 /* Time event policy values * A notification (both event and fragment) includes a status indicating weather * the FW was able to schedule the event or not. For fragment start/end * notification the status is always success. There is no start/end fragment * notification for monolithic events. * * @TE_V2_DEFAULT_POLICY: independent, social, present, unoticable * @TE_V2_NOTIF_HOST_EVENT_START: request/receive notification on event start * @TE_V2_NOTIF_HOST_EVENT_END:request/receive notification on event end * @TE_V2_NOTIF_INTERNAL_EVENT_START: internal FW use * @TE_V2_NOTIF_INTERNAL_EVENT_END: internal FW use. * @TE_V2_NOTIF_HOST_FRAG_START: request/receive notification on frag start * @TE_V2_NOTIF_HOST_FRAG_END:request/receive notification on frag end * @TE_V2_NOTIF_INTERNAL_FRAG_START: internal FW use. * @TE_V2_NOTIF_INTERNAL_FRAG_END: internal FW use. * @TE_V2_DEP_OTHER: depends on another time event * @TE_V2_DEP_TSF: depends on a specific time * @TE_V2_EVENT_SOCIOPATHIC: can't co-exist with other events of tha same MAC * @TE_V2_ABSENCE: are we present or absent during the Time Event. */ enum { TE_V2_DEFAULT_POLICY = 0x0, /* notifications (event start/stop, fragment start/stop) */ TE_V2_NOTIF_HOST_EVENT_START = BIT(0), TE_V2_NOTIF_HOST_EVENT_END = BIT(1), TE_V2_NOTIF_INTERNAL_EVENT_START = BIT(2), TE_V2_NOTIF_INTERNAL_EVENT_END = BIT(3), TE_V2_NOTIF_HOST_FRAG_START = BIT(4), TE_V2_NOTIF_HOST_FRAG_END = BIT(5), TE_V2_NOTIF_INTERNAL_FRAG_START = BIT(6), TE_V2_NOTIF_INTERNAL_FRAG_END = BIT(7), T2_V2_START_IMMEDIATELY = BIT(11), TE_V2_NOTIF_MSK = 0xff, /* placement characteristics */ TE_V2_DEP_OTHER = BIT(TE_V2_PLACEMENT_POS), TE_V2_DEP_TSF = BIT(TE_V2_PLACEMENT_POS + 1), TE_V2_EVENT_SOCIOPATHIC = BIT(TE_V2_PLACEMENT_POS + 2), /* are we present or absent during the Time Event. */ TE_V2_ABSENCE = BIT(TE_V2_ABSENCE_POS), }; /** * struct iwl_time_event_cmd_api - configuring Time Events * with struct MAC_TIME_EVENT_DATA_API_S_VER_2 (see also * with version 1. determined by IWL_UCODE_TLV_FLAGS) * ( TIME_EVENT_CMD = 0x29 ) * @id_and_color: ID and color of the relevant MAC * @action: action to perform, one of FW_CTXT_ACTION_* * @id: this field has two meanings, depending on the action: * If the action is ADD, then it means the type of event to add. * For all other actions it is the unique event ID assigned when the * event was added by the FW. * @apply_time: When to start the Time Event (in GP2) * @max_delay: maximum delay to event's start (apply time), in TU * @depends_on: the unique ID of the event we depend on (if any) * @interval: interval between repetitions, in TU * @duration: duration of event in TU * @repeat: how many repetitions to do, can be TE_REPEAT_ENDLESS * @max_frags: maximal number of fragments the Time Event can be divided to * @policy: defines whether uCode shall notify the host or other uCode modules * on event and/or fragment start and/or end * using one of TE_INDEPENDENT, TE_DEP_OTHER, TE_DEP_TSF * TE_EVENT_SOCIOPATHIC * using TE_ABSENCE and using TE_NOTIF_* */ struct iwl_time_event_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ __le32 id_and_color; __le32 action; __le32 id; /* MAC_TIME_EVENT_DATA_API_S_VER_2 */ __le32 apply_time; __le32 max_delay; __le32 depends_on; __le32 interval; __le32 duration; u8 repeat; u8 max_frags; __le16 policy; } __packed; /* MAC_TIME_EVENT_CMD_API_S_VER_2 */ /** * struct iwl_time_event_resp - response structure to iwl_time_event_cmd * @status: bit 0 indicates success, all others specify errors * @id: the Time Event type * @unique_id: the unique ID assigned (in ADD) or given (others) to the TE * @id_and_color: ID and color of the relevant MAC */ struct iwl_time_event_resp { __le32 status; __le32 id; __le32 unique_id; __le32 id_and_color; } __packed; /* MAC_TIME_EVENT_RSP_API_S_VER_1 */ /** * struct iwl_time_event_notif - notifications of time event start/stop * ( TIME_EVENT_NOTIFICATION = 0x2a ) * @timestamp: action timestamp in GP2 * @session_id: session's unique id * @unique_id: unique id of the Time Event itself * @id_and_color: ID and color of the relevant MAC * @action: one of TE_NOTIF_START or TE_NOTIF_END * @status: true if scheduled, false otherwise (not executed) */ struct iwl_time_event_notif { __le32 timestamp; __le32 session_id; __le32 unique_id; __le32 id_and_color; __le32 action; __le32 status; } __packed; /* MAC_TIME_EVENT_NTFY_API_S_VER_1 */ /* Bindings and Time Quota */ /** * struct iwl_binding_cmd - configuring bindings * ( BINDING_CONTEXT_CMD = 0x2b ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of FW_CTXT_ACTION_* * @macs: array of MAC id and colors which belong to the binding * @phy: PHY id and color which belongs to the binding */ struct iwl_binding_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ __le32 id_and_color; __le32 action; /* BINDING_DATA_API_S_VER_1 */ __le32 macs[MAX_MACS_IN_BINDING]; __le32 phy; } __packed; /* BINDING_CMD_API_S_VER_1 */ /* The maximal number of fragments in the FW's schedule session */ #define IWL_MVM_MAX_QUOTA 128 /** * struct iwl_time_quota_data - configuration of time quota per binding * @id_and_color: ID and color of the relevant Binding * @quota: absolute time quota in TU. The scheduler will try to divide the * remainig quota (after Time Events) according to this quota. * @max_duration: max uninterrupted context duration in TU */ struct iwl_time_quota_data { __le32 id_and_color; __le32 quota; __le32 max_duration; } __packed; /* TIME_QUOTA_DATA_API_S_VER_1 */ /** * struct iwl_time_quota_cmd - configuration of time quota between bindings * ( TIME_QUOTA_CMD = 0x2c ) * @quotas: allocations per binding */ struct iwl_time_quota_cmd { struct iwl_time_quota_data quotas[MAX_BINDINGS]; } __packed; /* TIME_QUOTA_ALLOCATION_CMD_API_S_VER_1 */ /* PHY context */ /* Supported bands */ #define PHY_BAND_5 (0) #define PHY_BAND_24 (1) /* Supported channel width, vary if there is VHT support */ #define PHY_VHT_CHANNEL_MODE20 (0x0) #define PHY_VHT_CHANNEL_MODE40 (0x1) #define PHY_VHT_CHANNEL_MODE80 (0x2) #define PHY_VHT_CHANNEL_MODE160 (0x3) /* * Control channel position: * For legacy set bit means upper channel, otherwise lower. * For VHT - bit-2 marks if the control is lower/upper relative to center-freq * bits-1:0 mark the distance from the center freq. for 20Mhz, offset is 0. * center_freq * | * 40Mhz |_______|_______| * 80Mhz |_______|_______|_______|_______| * 160Mhz |_______|_______|_______|_______|_______|_______|_______|_______| * code 011 010 001 000 | 100 101 110 111 */ #define PHY_VHT_CTRL_POS_1_BELOW (0x0) #define PHY_VHT_CTRL_POS_2_BELOW (0x1) #define PHY_VHT_CTRL_POS_3_BELOW (0x2) #define PHY_VHT_CTRL_POS_4_BELOW (0x3) #define PHY_VHT_CTRL_POS_1_ABOVE (0x4) #define PHY_VHT_CTRL_POS_2_ABOVE (0x5) #define PHY_VHT_CTRL_POS_3_ABOVE (0x6) #define PHY_VHT_CTRL_POS_4_ABOVE (0x7) /* * @band: PHY_BAND_* * @channel: channel number * @width: PHY_[VHT|LEGACY]_CHANNEL_* * @ctrl channel: PHY_[VHT|LEGACY]_CTRL_* */ struct iwl_fw_channel_info { u8 band; u8 channel; u8 width; u8 ctrl_pos; } __packed; #define PHY_RX_CHAIN_DRIVER_FORCE_POS (0) #define PHY_RX_CHAIN_DRIVER_FORCE_MSK \ (0x1 << PHY_RX_CHAIN_DRIVER_FORCE_POS) #define PHY_RX_CHAIN_VALID_POS (1) #define PHY_RX_CHAIN_VALID_MSK \ (0x7 << PHY_RX_CHAIN_VALID_POS) #define PHY_RX_CHAIN_FORCE_SEL_POS (4) #define PHY_RX_CHAIN_FORCE_SEL_MSK \ (0x7 << PHY_RX_CHAIN_FORCE_SEL_POS) #define PHY_RX_CHAIN_FORCE_MIMO_SEL_POS (7) #define PHY_RX_CHAIN_FORCE_MIMO_SEL_MSK \ (0x7 << PHY_RX_CHAIN_FORCE_MIMO_SEL_POS) #define PHY_RX_CHAIN_CNT_POS (10) #define PHY_RX_CHAIN_CNT_MSK \ (0x3 << PHY_RX_CHAIN_CNT_POS) #define PHY_RX_CHAIN_MIMO_CNT_POS (12) #define PHY_RX_CHAIN_MIMO_CNT_MSK \ (0x3 << PHY_RX_CHAIN_MIMO_CNT_POS) #define PHY_RX_CHAIN_MIMO_FORCE_POS (14) #define PHY_RX_CHAIN_MIMO_FORCE_MSK \ (0x1 << PHY_RX_CHAIN_MIMO_FORCE_POS) /* TODO: fix the value, make it depend on firmware at runtime? */ #define NUM_PHY_CTX 3 /* TODO: complete missing documentation */ /** * struct iwl_phy_context_cmd - config of the PHY context * ( PHY_CONTEXT_CMD = 0x8 ) * @id_and_color: ID and color of the relevant Binding * @action: action to perform, one of FW_CTXT_ACTION_* * @apply_time: 0 means immediate apply and context switch. * other value means apply new params after X usecs * @tx_param_color: ??? * @channel_info: * @txchain_info: ??? * @rxchain_info: ??? * @acquisition_data: ??? * @dsp_cfg_flags: set to 0 */ struct iwl_phy_context_cmd { /* COMMON_INDEX_HDR_API_S_VER_1 */ __le32 id_and_color; __le32 action; /* PHY_CONTEXT_DATA_API_S_VER_1 */ __le32 apply_time; __le32 tx_param_color; struct iwl_fw_channel_info ci; __le32 txchain_info; __le32 rxchain_info; __le32 acquisition_data; __le32 dsp_cfg_flags; } __packed; /* PHY_CONTEXT_CMD_API_VER_1 */ /* * Aux ROC command * * Command requests the firmware to create a time event for a certain duration * and remain on the given channel. This is done by using the Aux framework in * the FW. * The command was first used for Hot Spot issues - but can be used regardless * to Hot Spot. * * ( HOT_SPOT_CMD 0x53 ) * * @id_and_color: ID and color of the MAC * @action: action to perform, one of FW_CTXT_ACTION_* * @event_unique_id: If the action FW_CTXT_ACTION_REMOVE then the * event_unique_id should be the id of the time event assigned by ucode. * Otherwise ignore the event_unique_id. * @sta_id_and_color: station id and color, resumed during "Remain On Channel" * activity. * @channel_info: channel info * @node_addr: Our MAC Address * @reserved: reserved for alignment * @apply_time: GP2 value to start (should always be the current GP2 value) * @apply_time_max_delay: Maximum apply time delay value in TU. Defines max * time by which start of the event is allowed to be postponed. * @duration: event duration in TU To calculate event duration: * timeEventDuration = min(duration, remainingQuota) */ struct iwl_hs20_roc_req { /* COMMON_INDEX_HDR_API_S_VER_1 hdr */ __le32 id_and_color; __le32 action; __le32 event_unique_id; __le32 sta_id_and_color; struct iwl_fw_channel_info channel_info; u8 node_addr[ETH_ALEN]; __le16 reserved; __le32 apply_time; __le32 apply_time_max_delay; __le32 duration; } __packed; /* HOT_SPOT_CMD_API_S_VER_1 */ /* * values for AUX ROC result values */ enum iwl_mvm_hot_spot { HOT_SPOT_RSP_STATUS_OK, HOT_SPOT_RSP_STATUS_TOO_MANY_EVENTS, HOT_SPOT_MAX_NUM_OF_SESSIONS, }; /* * Aux ROC command response * * In response to iwl_hs20_roc_req the FW sends this command to notify the * driver the uid of the timevent. * * ( HOT_SPOT_CMD 0x53 ) * * @event_unique_id: Unique ID of time event assigned by ucode * @status: Return status 0 is success, all the rest used for specific errors */ struct iwl_hs20_roc_res { __le32 event_unique_id; __le32 status; } __packed; /* HOT_SPOT_RSP_API_S_VER_1 */ /** * struct iwl_radio_version_notif - information on the radio version * ( RADIO_VERSION_NOTIFICATION = 0x68 ) * @radio_flavor: * @radio_step: * @radio_dash: */ struct iwl_radio_version_notif { __le32 radio_flavor; __le32 radio_step; __le32 radio_dash; } __packed; /* RADIO_VERSION_NOTOFICATION_S_VER_1 */ enum iwl_card_state_flags { CARD_ENABLED = 0x00, HW_CARD_DISABLED = 0x01, SW_CARD_DISABLED = 0x02, CT_KILL_CARD_DISABLED = 0x04, HALT_CARD_DISABLED = 0x08, CARD_DISABLED_MSK = 0x0f, CARD_IS_RX_ON = 0x10, }; /** * struct iwl_radio_version_notif - information on the radio version * ( CARD_STATE_NOTIFICATION = 0xa1 ) * @flags: %iwl_card_state_flags */ struct iwl_card_state_notif { __le32 flags; } __packed; /* CARD_STATE_NTFY_API_S_VER_1 */ /** * struct iwl_missed_beacons_notif - information on missed beacons * ( MISSED_BEACONS_NOTIFICATION = 0xa2 ) * @mac_id: interface ID * @consec_missed_beacons_since_last_rx: number of consecutive missed * beacons since last RX. * @consec_missed_beacons: number of consecutive missed beacons * @num_expected_beacons: * @num_recvd_beacons: */ struct iwl_missed_beacons_notif { __le32 mac_id; __le32 consec_missed_beacons_since_last_rx; __le32 consec_missed_beacons; __le32 num_expected_beacons; __le32 num_recvd_beacons; } __packed; /* MISSED_BEACON_NTFY_API_S_VER_3 */ /** * struct iwl_mfuart_load_notif - mfuart image version & status * ( MFUART_LOAD_NOTIFICATION = 0xb1 ) * @installed_ver: installed image version * @external_ver: external image version * @status: MFUART loading status * @duration: MFUART loading time */ struct iwl_mfuart_load_notif { __le32 installed_ver; __le32 external_ver; __le32 status; __le32 duration; } __packed; /*MFU_LOADER_NTFY_API_S_VER_1*/ /** * struct iwl_set_calib_default_cmd - set default value for calibration. * ( SET_CALIB_DEFAULT_CMD = 0x8e ) * @calib_index: the calibration to set value for * @length: of data * @data: the value to set for the calibration result */ struct iwl_set_calib_default_cmd { __le16 calib_index; __le16 length; u8 data[0]; } __packed; /* PHY_CALIB_OVERRIDE_VALUES_S */ #define MAX_PORT_ID_NUM 2 #define MAX_MCAST_FILTERING_ADDRESSES 256 /** * struct iwl_mcast_filter_cmd - configure multicast filter. * @filter_own: Set 1 to filter out multicast packets sent by station itself * @port_id: Multicast MAC addresses array specifier. This is a strange way * to identify network interface adopted in host-device IF. * It is used by FW as index in array of addresses. This array has * MAX_PORT_ID_NUM members. * @count: Number of MAC addresses in the array * @pass_all: Set 1 to pass all multicast packets. * @bssid: current association BSSID. * @addr_list: Place holder for array of MAC addresses. * IMPORTANT: add padding if necessary to ensure DWORD alignment. */ struct iwl_mcast_filter_cmd { u8 filter_own; u8 port_id; u8 count; u8 pass_all; u8 bssid[6]; u8 reserved[2]; u8 addr_list[0]; } __packed; /* MCAST_FILTERING_CMD_API_S_VER_1 */ #define MAX_BCAST_FILTERS 8 #define MAX_BCAST_FILTER_ATTRS 2 /** * enum iwl_mvm_bcast_filter_attr_offset - written by fw for each Rx packet * @BCAST_FILTER_OFFSET_PAYLOAD_START: offset is from payload start. * @BCAST_FILTER_OFFSET_IP_END: offset is from ip header end (i.e. * start of ip payload). */ enum iwl_mvm_bcast_filter_attr_offset { BCAST_FILTER_OFFSET_PAYLOAD_START = 0, BCAST_FILTER_OFFSET_IP_END = 1, }; /** * struct iwl_fw_bcast_filter_attr - broadcast filter attribute * @offset_type: &enum iwl_mvm_bcast_filter_attr_offset. * @offset: starting offset of this pattern. * @val: value to match - big endian (MSB is the first * byte to match from offset pos). * @mask: mask to match (big endian). */ struct iwl_fw_bcast_filter_attr { u8 offset_type; u8 offset; __le16 reserved1; __be32 val; __be32 mask; } __packed; /* BCAST_FILTER_ATT_S_VER_1 */ /** * enum iwl_mvm_bcast_filter_frame_type - filter frame type * @BCAST_FILTER_FRAME_TYPE_ALL: consider all frames. * @BCAST_FILTER_FRAME_TYPE_IPV4: consider only ipv4 frames */ enum iwl_mvm_bcast_filter_frame_type { BCAST_FILTER_FRAME_TYPE_ALL = 0, BCAST_FILTER_FRAME_TYPE_IPV4 = 1, }; /** * struct iwl_fw_bcast_filter - broadcast filter * @discard: discard frame (1) or let it pass (0). * @frame_type: &enum iwl_mvm_bcast_filter_frame_type. * @num_attrs: number of valid attributes in this filter. * @attrs: attributes of this filter. a filter is considered matched * only when all its attributes are matched (i.e. AND relationship) */ struct iwl_fw_bcast_filter { u8 discard; u8 frame_type; u8 num_attrs; u8 reserved1; struct iwl_fw_bcast_filter_attr attrs[MAX_BCAST_FILTER_ATTRS]; } __packed; /* BCAST_FILTER_S_VER_1 */ #define BA_WINDOW_STREAMS_MAX 16 #define BA_WINDOW_STATUS_TID_MSK 0x000F #define BA_WINDOW_STATUS_STA_ID_POS 4 #define BA_WINDOW_STATUS_STA_ID_MSK 0x01F0 #define BA_WINDOW_STATUS_VALID_MSK BIT(9) /** * struct iwl_ba_window_status_notif - reordering window's status notification * @bitmap: bitmap of received frames [start_seq_num + 0]..[start_seq_num + 63] * @ra_tid: bit 3:0 - TID, bit 8:4 - STA_ID, bit 9 - valid * @start_seq_num: the start sequence number of the bitmap * @mpdu_rx_count: the number of received MPDUs since entering D0i3 */ struct iwl_ba_window_status_notif { __le64 bitmap[BA_WINDOW_STREAMS_MAX]; __le16 ra_tid[BA_WINDOW_STREAMS_MAX]; __le32 start_seq_num[BA_WINDOW_STREAMS_MAX]; __le16 mpdu_rx_count[BA_WINDOW_STREAMS_MAX]; } __packed; /* BA_WINDOW_STATUS_NTFY_API_S_VER_1 */ /** * struct iwl_fw_bcast_mac - per-mac broadcast filtering configuration. * @default_discard: default action for this mac (discard (1) / pass (0)). * @attached_filters: bitmap of relevant filters for this mac. */ struct iwl_fw_bcast_mac { u8 default_discard; u8 reserved1; __le16 attached_filters; } __packed; /* BCAST_MAC_CONTEXT_S_VER_1 */ /** * struct iwl_bcast_filter_cmd - broadcast filtering configuration * @disable: enable (0) / disable (1) * @max_bcast_filters: max number of filters (MAX_BCAST_FILTERS) * @max_macs: max number of macs (NUM_MAC_INDEX_DRIVER) * @filters: broadcast filters * @macs: broadcast filtering configuration per-mac */ struct iwl_bcast_filter_cmd { u8 disable; u8 max_bcast_filters; u8 max_macs; u8 reserved1; struct iwl_fw_bcast_filter filters[MAX_BCAST_FILTERS]; struct iwl_fw_bcast_mac macs[NUM_MAC_INDEX_DRIVER]; } __packed; /* BCAST_FILTERING_HCMD_API_S_VER_1 */ /* * enum iwl_mvm_marker_id - maker ids * * The ids for different type of markers to insert into the usniffer logs */ enum iwl_mvm_marker_id { MARKER_ID_TX_FRAME_LATENCY = 1, }; /* MARKER_ID_API_E_VER_1 */ /** * struct iwl_mvm_marker - mark info into the usniffer logs * * (MARKER_CMD = 0xcb) * * Mark the UTC time stamp into the usniffer logs together with additional * metadata, so the usniffer output can be parsed. * In the command response the ucode will return the GP2 time. * * @dw_len: The amount of dwords following this byte including this byte. * @marker_id: A unique marker id (iwl_mvm_marker_id). * @reserved: reserved. * @timestamp: in milliseconds since 1970-01-01 00:00:00 UTC * @metadata: additional meta data that will be written to the unsiffer log */ struct iwl_mvm_marker { u8 dwLen; u8 markerId; __le16 reserved; __le64 timestamp; __le32 metadata[0]; } __packed; /* MARKER_API_S_VER_1 */ /* * enum iwl_dc2dc_config_id - flag ids * * Ids of dc2dc configuration flags */ enum iwl_dc2dc_config_id { DCDC_LOW_POWER_MODE_MSK_SET = 0x1, /* not used */ DCDC_FREQ_TUNE_SET = 0x2, }; /* MARKER_ID_API_E_VER_1 */ /** * struct iwl_dc2dc_config_cmd - configure dc2dc values * * (DC2DC_CONFIG_CMD = 0x83) * * Set/Get & configure dc2dc values. * The command always returns the current dc2dc values. * * @flags: set/get dc2dc * @enable_low_power_mode: not used. * @dc2dc_freq_tune0: frequency divider - digital domain * @dc2dc_freq_tune1: frequency divider - analog domain */ struct iwl_dc2dc_config_cmd { __le32 flags; __le32 enable_low_power_mode; /* not used */ __le32 dc2dc_freq_tune0; __le32 dc2dc_freq_tune1; } __packed; /* DC2DC_CONFIG_CMD_API_S_VER_1 */ /** * struct iwl_dc2dc_config_resp - response for iwl_dc2dc_config_cmd * * Current dc2dc values returned by the FW. * * @dc2dc_freq_tune0: frequency divider - digital domain * @dc2dc_freq_tune1: frequency divider - analog domain */ struct iwl_dc2dc_config_resp { __le32 dc2dc_freq_tune0; __le32 dc2dc_freq_tune1; } __packed; /* DC2DC_CONFIG_RESP_API_S_VER_1 */ /*********************************** * Smart Fifo API ***********************************/ /* Smart Fifo state */ enum iwl_sf_state { SF_LONG_DELAY_ON = 0, /* should never be called by driver */ SF_FULL_ON, SF_UNINIT, SF_INIT_OFF, SF_HW_NUM_STATES }; /* Smart Fifo possible scenario */ enum iwl_sf_scenario { SF_SCENARIO_SINGLE_UNICAST, SF_SCENARIO_AGG_UNICAST, SF_SCENARIO_MULTICAST, SF_SCENARIO_BA_RESP, SF_SCENARIO_TX_RESP, SF_NUM_SCENARIO }; #define SF_TRANSIENT_STATES_NUMBER 2 /* SF_LONG_DELAY_ON and SF_FULL_ON */ #define SF_NUM_TIMEOUT_TYPES 2 /* Aging timer and Idle timer */ /* smart FIFO default values */ #define SF_W_MARK_SISO 6144 #define SF_W_MARK_MIMO2 8192 #define SF_W_MARK_MIMO3 6144 #define SF_W_MARK_LEGACY 4096 #define SF_W_MARK_SCAN 4096 /* SF Scenarios timers for default configuration (aligned to 32 uSec) */ #define SF_SINGLE_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define SF_SINGLE_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define SF_AGG_UNICAST_IDLE_TIMER_DEF 160 /* 150 uSec */ #define SF_AGG_UNICAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define SF_MCAST_IDLE_TIMER_DEF 160 /* 150 mSec */ #define SF_MCAST_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define SF_BA_IDLE_TIMER_DEF 160 /* 150 uSec */ #define SF_BA_AGING_TIMER_DEF 400 /* 0.4 mSec */ #define SF_TX_RE_IDLE_TIMER_DEF 160 /* 150 uSec */ #define SF_TX_RE_AGING_TIMER_DEF 400 /* 0.4 mSec */ /* SF Scenarios timers for BSS MAC configuration (aligned to 32 uSec) */ #define SF_SINGLE_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define SF_SINGLE_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define SF_AGG_UNICAST_IDLE_TIMER 320 /* 300 uSec */ #define SF_AGG_UNICAST_AGING_TIMER 2016 /* 2 mSec */ #define SF_MCAST_IDLE_TIMER 2016 /* 2 mSec */ #define SF_MCAST_AGING_TIMER 10016 /* 10 mSec */ #define SF_BA_IDLE_TIMER 320 /* 300 uSec */ #define SF_BA_AGING_TIMER 2016 /* 2 mSec */ #define SF_TX_RE_IDLE_TIMER 320 /* 300 uSec */ #define SF_TX_RE_AGING_TIMER 2016 /* 2 mSec */ #define SF_LONG_DELAY_AGING_TIMER 1000000 /* 1 Sec */ #define SF_CFG_DUMMY_NOTIF_OFF BIT(16) /** * Smart Fifo configuration command. * @state: smart fifo state, types listed in enum %iwl_sf_sate. * @watermark: Minimum allowed availabe free space in RXF for transient state. * @long_delay_timeouts: aging and idle timer values for each scenario * in long delay state. * @full_on_timeouts: timer values for each scenario in full on state. */ struct iwl_sf_cfg_cmd { __le32 state; __le32 watermark[SF_TRANSIENT_STATES_NUMBER]; __le32 long_delay_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; __le32 full_on_timeouts[SF_NUM_SCENARIO][SF_NUM_TIMEOUT_TYPES]; } __packed; /* SF_CFG_API_S_VER_2 */ /*********************************** * Location Aware Regulatory (LAR) API - MCC updates ***********************************/ /** * struct iwl_mcc_update_cmd_v1 - Request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: the source from where we got the MCC, see iwl_mcc_source * @reserved: reserved for alignment */ struct iwl_mcc_update_cmd_v1 { __le16 mcc; u8 source_id; u8 reserved; } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_1 */ /** * struct iwl_mcc_update_cmd - Request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: the source from where we got the MCC, see iwl_mcc_source * @reserved: reserved for alignment * @key: integrity key for MCC API OEM testing * @reserved2: reserved */ struct iwl_mcc_update_cmd { __le16 mcc; u8 source_id; u8 reserved; __le32 key; __le32 reserved2[5]; } __packed; /* LAR_UPDATE_MCC_CMD_API_S_VER_2 */ /** * iwl_mcc_update_resp_v1 - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwl_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see iwl_mcc_source * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwl_mcc_update_resp_v1 { __le32 status; __le16 mcc; u8 cap; u8 source_id; __le32 n_channels; __le32 channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_1 */ /** * iwl_mcc_update_resp - response to MCC_UPDATE_CMD. * Contains the new channel control profile map, if changed, and the new MCC * (mobile country code). * The new MCC may be different than what was requested in MCC_UPDATE_CMD. * @status: see &enum iwl_mcc_update_status * @mcc: the new applied MCC * @cap: capabilities for all channels which matches the MCC * @source_id: the MCC source, see iwl_mcc_source * @time: time elapsed from the MCC test start (in 30 seconds TU) * @reserved: reserved. * @n_channels: number of channels in @channels_data (may be 14, 39, 50 or 51 * channels, depending on platform) * @channels: channel control data map, DWORD for each channel. Only the first * 16bits are used. */ struct iwl_mcc_update_resp { __le32 status; __le16 mcc; u8 cap; u8 source_id; __le16 time; __le16 reserved; __le32 n_channels; __le32 channels[0]; } __packed; /* LAR_UPDATE_MCC_CMD_RESP_S_VER_2 */ /** * struct iwl_mcc_chub_notif - chub notifies of mcc change * (MCC_CHUB_UPDATE_CMD = 0xc9) * The Chub (Communication Hub, CommsHUB) is a HW component that connects to * the cellular and connectivity cores that gets updates of the mcc, and * notifies the ucode directly of any mcc change. * The ucode requests the driver to request the device to update geographic * regulatory profile according to the given MCC (Mobile Country Code). * The MCC is two letter-code, ascii upper case[A-Z] or '00' for world domain. * 'ZZ' MCC will be used to switch to NVM default profile; in this case, the * MCC in the cmd response will be the relevant MCC in the NVM. * @mcc: given mobile country code * @source_id: identity of the change originator, see iwl_mcc_source * @reserved1: reserved for alignment */ struct iwl_mcc_chub_notif { u16 mcc; u8 source_id; u8 reserved1; } __packed; /* LAR_MCC_NOTIFY_S */ enum iwl_mcc_update_status { MCC_RESP_NEW_CHAN_PROFILE, MCC_RESP_SAME_CHAN_PROFILE, MCC_RESP_INVALID, MCC_RESP_NVM_DISABLED, MCC_RESP_ILLEGAL, MCC_RESP_LOW_PRIORITY, MCC_RESP_TEST_MODE_ACTIVE, MCC_RESP_TEST_MODE_NOT_ACTIVE, MCC_RESP_TEST_MODE_DENIAL_OF_SERVICE, }; enum iwl_mcc_source { MCC_SOURCE_OLD_FW = 0, MCC_SOURCE_ME = 1, MCC_SOURCE_BIOS = 2, MCC_SOURCE_3G_LTE_HOST = 3, MCC_SOURCE_3G_LTE_DEVICE = 4, MCC_SOURCE_WIFI = 5, MCC_SOURCE_RESERVED = 6, MCC_SOURCE_DEFAULT = 7, MCC_SOURCE_UNINITIALIZED = 8, MCC_SOURCE_MCC_API = 9, MCC_SOURCE_GET_CURRENT = 0x10, MCC_SOURCE_GETTING_MCC_TEST_MODE = 0x11, }; /* DTS measurements */ enum iwl_dts_measurement_flags { DTS_TRIGGER_CMD_FLAGS_TEMP = BIT(0), DTS_TRIGGER_CMD_FLAGS_VOLT = BIT(1), }; /** * iwl_dts_measurement_cmd - request DTS temperature and/or voltage measurements * * @flags: indicates which measurements we want as specified in &enum * iwl_dts_measurement_flags */ struct iwl_dts_measurement_cmd { __le32 flags; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_CMD_S */ /** * enum iwl_dts_control_measurement_mode - DTS measurement type * @DTS_AUTOMATIC: Automatic mode (full SW control). Provide temperature read * back (latest value. Not waiting for new value). Use automatic * SW DTS configuration. * @DTS_REQUEST_READ: Request DTS read. Configure DTS with manual settings, * trigger DTS reading and provide read back temperature read * when available. * @DTS_OVER_WRITE: over-write the DTS temperatures in the SW until next read * @DTS_DIRECT_WITHOUT_MEASURE: DTS returns its latest temperature result, * without measurement trigger. */ enum iwl_dts_control_measurement_mode { DTS_AUTOMATIC = 0, DTS_REQUEST_READ = 1, DTS_OVER_WRITE = 2, DTS_DIRECT_WITHOUT_MEASURE = 3, }; /** * enum iwl_dts_used - DTS to use or used for measurement in the DTS request * @DTS_USE_TOP: Top * @DTS_USE_CHAIN_A: chain A * @DTS_USE_CHAIN_B: chain B * @DTS_USE_CHAIN_C: chain C * @XTAL_TEMPERATURE - read temperature from xtal */ enum iwl_dts_used { DTS_USE_TOP = 0, DTS_USE_CHAIN_A = 1, DTS_USE_CHAIN_B = 2, DTS_USE_CHAIN_C = 3, XTAL_TEMPERATURE = 4, }; /** * enum iwl_dts_bit_mode - bit-mode to use in DTS request read mode * @DTS_BIT6_MODE: bit 6 mode * @DTS_BIT8_MODE: bit 8 mode */ enum iwl_dts_bit_mode { DTS_BIT6_MODE = 0, DTS_BIT8_MODE = 1, }; /** * iwl_ext_dts_measurement_cmd - request extended DTS temperature measurements * @control_mode: see &enum iwl_dts_control_measurement_mode * @temperature: used when over write DTS mode is selected * @sensor: set temperature sensor to use. See &enum iwl_dts_used * @avg_factor: average factor to DTS in request DTS read mode * @bit_mode: value defines the DTS bit mode to use. See &enum iwl_dts_bit_mode * @step_duration: step duration for the DTS */ struct iwl_ext_dts_measurement_cmd { __le32 control_mode; __le32 temperature; __le32 sensor; __le32 avg_factor; __le32 bit_mode; __le32 step_duration; } __packed; /* XVT_FW_DTS_CONTROL_MEASUREMENT_REQUEST_API_S */ /** * struct iwl_dts_measurement_notif_v1 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage */ struct iwl_dts_measurement_notif_v1 { __le32 temp; __le32 voltage; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_1*/ /** * struct iwl_dts_measurement_notif_v2 - measurements notification * * @temp: the measured temperature * @voltage: the measured voltage * @threshold_idx: the trip index that was crossed */ struct iwl_dts_measurement_notif_v2 { __le32 temp; __le32 voltage; __le32 threshold_idx; } __packed; /* TEMPERATURE_MEASUREMENT_TRIGGER_NTFY_S_VER_2 */ /** * struct ct_kill_notif - CT-kill entry notification * * @temperature: the current temperature in celsius * @reserved: reserved */ struct ct_kill_notif { __le16 temperature; __le16 reserved; } __packed; /* GRP_PHY_CT_KILL_NTF */ /** * enum ctdp_cmd_operation - CTDP command operations * @CTDP_CMD_OPERATION_START: update the current budget * @CTDP_CMD_OPERATION_STOP: stop ctdp * @CTDP_CMD_OPERATION_REPORT: get the avgerage budget */ enum iwl_mvm_ctdp_cmd_operation { CTDP_CMD_OPERATION_START = 0x1, CTDP_CMD_OPERATION_STOP = 0x2, CTDP_CMD_OPERATION_REPORT = 0x4, };/* CTDP_CMD_OPERATION_TYPE_E */ /** * struct iwl_mvm_ctdp_cmd - track and manage the FW power consumption budget * * @operation: see &enum iwl_mvm_ctdp_cmd_operation * @budget: the budget in milliwatt * @window_size: defined in API but not used */ struct iwl_mvm_ctdp_cmd { __le32 operation; __le32 budget; __le32 window_size; } __packed; #define IWL_MAX_DTS_TRIPS 8 /** * struct iwl_temp_report_ths_cmd - set temperature thresholds * * @num_temps: number of temperature thresholds passed * @thresholds: array with the thresholds to be configured */ struct temp_report_ths_cmd { __le32 num_temps; __le16 thresholds[IWL_MAX_DTS_TRIPS]; } __packed; /* GRP_PHY_TEMP_REPORTING_THRESHOLDS_CMD */ /*********************************** * TDLS API ***********************************/ /* Type of TDLS request */ enum iwl_tdls_channel_switch_type { TDLS_SEND_CHAN_SW_REQ = 0, TDLS_SEND_CHAN_SW_RESP_AND_MOVE_CH, TDLS_MOVE_CH, }; /* TDLS_STA_CHANNEL_SWITCH_CMD_TYPE_API_E_VER_1 */ /** * Switch timing sub-element in a TDLS channel-switch command * @frame_timestamp: GP2 timestamp of channel-switch request/response packet * received from peer * @max_offchan_duration: What amount of microseconds out of a DTIM is given * to the TDLS off-channel communication. For instance if the DTIM is * 200TU and the TDLS peer is to be given 25% of the time, the value * given will be 50TU, or 50 * 1024 if translated into microseconds. * @switch_time: switch time the peer sent in its channel switch timing IE * @switch_timout: switch timeout the peer sent in its channel switch timing IE */ struct iwl_tdls_channel_switch_timing { __le32 frame_timestamp; /* GP2 time of peer packet Rx */ __le32 max_offchan_duration; /* given in micro-seconds */ __le32 switch_time; /* given in micro-seconds */ __le32 switch_timeout; /* given in micro-seconds */ } __packed; /* TDLS_STA_CHANNEL_SWITCH_TIMING_DATA_API_S_VER_1 */ #define IWL_TDLS_CH_SW_FRAME_MAX_SIZE 200 /** * TDLS channel switch frame template * * A template representing a TDLS channel-switch request or response frame * * @switch_time_offset: offset to the channel switch timing IE in the template * @tx_cmd: Tx parameters for the frame * @data: frame data */ struct iwl_tdls_channel_switch_frame { __le32 switch_time_offset; struct iwl_tx_cmd tx_cmd; u8 data[IWL_TDLS_CH_SW_FRAME_MAX_SIZE]; } __packed; /* TDLS_STA_CHANNEL_SWITCH_FRAME_API_S_VER_1 */ /** * TDLS channel switch command * * The command is sent to initiate a channel switch and also in response to * incoming TDLS channel-switch request/response packets from remote peers. * * @switch_type: see &enum iwl_tdls_channel_switch_type * @peer_sta_id: station id of TDLS peer * @ci: channel we switch to * @timing: timing related data for command * @frame: channel-switch request/response template, depending to switch_type */ struct iwl_tdls_channel_switch_cmd { u8 switch_type; __le32 peer_sta_id; struct iwl_fw_channel_info ci; struct iwl_tdls_channel_switch_timing timing; struct iwl_tdls_channel_switch_frame frame; } __packed; /* TDLS_STA_CHANNEL_SWITCH_CMD_API_S_VER_1 */ /** * TDLS channel switch start notification * * @status: non-zero on success * @offchannel_duration: duration given in microseconds * @sta_id: peer currently performing the channel-switch with */ struct iwl_tdls_channel_switch_notif { __le32 status; __le32 offchannel_duration; __le32 sta_id; } __packed; /* TDLS_STA_CHANNEL_SWITCH_NTFY_API_S_VER_1 */ /** * TDLS station info * * @sta_id: station id of the TDLS peer * @tx_to_peer_tid: TID reserved vs. the peer for FW based Tx * @tx_to_peer_ssn: initial SSN the FW should use for Tx on its TID vs the peer * @is_initiator: 1 if the peer is the TDLS link initiator, 0 otherwise */ struct iwl_tdls_sta_info { u8 sta_id; u8 tx_to_peer_tid; __le16 tx_to_peer_ssn; __le32 is_initiator; } __packed; /* TDLS_STA_INFO_VER_1 */ /** * TDLS basic config command * * @id_and_color: MAC id and color being configured * @tdls_peer_count: amount of currently connected TDLS peers * @tx_to_ap_tid: TID reverved vs. the AP for FW based Tx * @tx_to_ap_ssn: initial SSN the FW should use for Tx on its TID vs. the AP * @sta_info: per-station info. Only the first tdls_peer_count entries are set * @pti_req_data_offset: offset of network-level data for the PTI template * @pti_req_tx_cmd: Tx parameters for PTI request template * @pti_req_template: PTI request template data */ struct iwl_tdls_config_cmd { __le32 id_and_color; /* mac id and color */ u8 tdls_peer_count; u8 tx_to_ap_tid; __le16 tx_to_ap_ssn; struct iwl_tdls_sta_info sta_info[IWL_MVM_TDLS_STA_COUNT]; __le32 pti_req_data_offset; struct iwl_tx_cmd pti_req_tx_cmd; u8 pti_req_template[0]; } __packed; /* TDLS_CONFIG_CMD_API_S_VER_1 */ /** * TDLS per-station config information from FW * * @sta_id: station id of the TDLS peer * @tx_to_peer_last_seq: last sequence number used by FW during FW-based Tx to * the peer */ struct iwl_tdls_config_sta_info_res { __le16 sta_id; __le16 tx_to_peer_last_seq; } __packed; /* TDLS_STA_INFO_RSP_VER_1 */ /** * TDLS config information from FW * * @tx_to_ap_last_seq: last sequence number used by FW during FW-based Tx to AP * @sta_info: per-station TDLS config information */ struct iwl_tdls_config_res { __le32 tx_to_ap_last_seq; struct iwl_tdls_config_sta_info_res sta_info[IWL_MVM_TDLS_STA_COUNT]; } __packed; /* TDLS_CONFIG_RSP_API_S_VER_1 */ #define TX_FIFO_MAX_NUM 8 #define RX_FIFO_MAX_NUM 2 #define TX_FIFO_INTERNAL_MAX_NUM 6 /** * Shared memory configuration information from the FW * * @shared_mem_addr: shared memory addr (pre 8000 HW set to 0x0 as MARBH is not * accessible) * @shared_mem_size: shared memory size * @sample_buff_addr: internal sample (mon/adc) buff addr (pre 8000 HW set to * 0x0 as accessible only via DBGM RDAT) * @sample_buff_size: internal sample buff size * @txfifo_addr: start addr of TXF0 (excluding the context table 0.5KB), (pre * 8000 HW set to 0x0 as not accessible) * @txfifo_size: size of TXF0 ... TXF7 * @rxfifo_size: RXF1, RXF2 sizes. If there is no RXF2, it'll have a value of 0 * @page_buff_addr: used by UMAC and performance debug (page miss analysis), * when paging is not supported this should be 0 * @page_buff_size: size of %page_buff_addr * @rxfifo_addr: Start address of rxFifo * @internal_txfifo_addr: start address of internalFifo * @internal_txfifo_size: internal fifos' size * * NOTE: on firmware that don't have IWL_UCODE_TLV_CAPA_EXTEND_SHARED_MEM_CFG * set, the last 3 members don't exist. */ struct iwl_shared_mem_cfg { __le32 shared_mem_addr; __le32 shared_mem_size; __le32 sample_buff_addr; __le32 sample_buff_size; __le32 txfifo_addr; __le32 txfifo_size[TX_FIFO_MAX_NUM]; __le32 rxfifo_size[RX_FIFO_MAX_NUM]; __le32 page_buff_addr; __le32 page_buff_size; __le32 rxfifo_addr; __le32 internal_txfifo_addr; __le32 internal_txfifo_size[TX_FIFO_INTERNAL_MAX_NUM]; } __packed; /* SHARED_MEM_ALLOC_API_S_VER_2 */ /** * VHT MU-MIMO group configuration * * @membership_status: a bitmap of MU groups * @user_position:the position of station in a group. If the station is in the * group then bits (group * 2) is the position -1 */ struct iwl_mu_group_mgmt_cmd { __le32 reserved; __le32 membership_status[2]; __le32 user_position[4]; } __packed; /* MU_GROUP_ID_MNG_TABLE_API_S_VER_1 */ /** * struct iwl_mu_group_mgmt_notif - VHT MU-MIMO group id notification * * @membership_status: a bitmap of MU groups * @user_position: the position of station in a group. If the station is in the * group then bits (group * 2) is the position -1 */ struct iwl_mu_group_mgmt_notif { __le32 membership_status[2]; __le32 user_position[4]; } __packed; /* MU_GROUP_MNG_NTFY_API_S_VER_1 */ #define MAX_STORED_BEACON_SIZE 600 /** * Stored beacon notification * * @system_time: system time on air rise * @tsf: TSF on air rise * @beacon_timestamp: beacon on air rise * @phy_flags: general phy flags: band, modulation, etc. * @channel: channel this beacon was received on * @rates: rate in ucode internal format * @byte_count: frame's byte count */ struct iwl_stored_beacon_notif { __le32 system_time; __le64 tsf; __le32 beacon_timestamp; __le16 phy_flags; __le16 channel; __le32 rates; __le32 byte_count; u8 data[MAX_STORED_BEACON_SIZE]; } __packed; /* WOWLAN_STROED_BEACON_INFO_S_VER_1 */ #define LQM_NUMBER_OF_STATIONS_IN_REPORT 16 enum iwl_lqm_cmd_operatrions { LQM_CMD_OPERATION_START_MEASUREMENT = 0x01, LQM_CMD_OPERATION_STOP_MEASUREMENT = 0x02, }; enum iwl_lqm_status { LQM_STATUS_SUCCESS = 0, LQM_STATUS_TIMEOUT = 1, LQM_STATUS_ABORT = 2, }; /** * Link Quality Measurement command * @cmd_operatrion: command operation to be performed (start or stop) * as defined above. * @mac_id: MAC ID the measurement applies to. * @measurement_time: time of the total measurement to be performed, in uSec. * @timeout: maximum time allowed until a response is sent, in uSec. */ struct iwl_link_qual_msrmnt_cmd { __le32 cmd_operation; __le32 mac_id; __le32 measurement_time; __le32 timeout; } __packed /* LQM_CMD_API_S_VER_1 */; /** * Link Quality Measurement notification * * @frequent_stations_air_time: an array containing the total air time * (in uSec) used by the most frequently transmitting stations. * @number_of_stations: the number of uniqe stations included in the array * (a number between 0 to 16) * @total_air_time_other_stations: the total air time (uSec) used by all the * stations which are not included in the above report. * @time_in_measurement_window: the total time in uSec in which a measurement * took place. * @tx_frame_dropped: the number of TX frames dropped due to retry limit during * measurement * @mac_id: MAC ID the measurement applies to. * @status: return status. may be one of the LQM_STATUS_* defined above. * @reserved: reserved. */ struct iwl_link_qual_msrmnt_notif { __le32 frequent_stations_air_time[LQM_NUMBER_OF_STATIONS_IN_REPORT]; __le32 number_of_stations; __le32 total_air_time_other_stations; __le32 time_in_measurement_window; __le32 tx_frame_dropped; __le32 mac_id; __le32 status; __le32 reserved[3]; } __packed; /* LQM_MEASUREMENT_COMPLETE_NTF_API_S_VER1 */ /** * Channel switch NOA notification * * @id_and_color: ID and color of the MAC */ struct iwl_channel_switch_noa_notif { __le32 id_and_color; } __packed; /* CHANNEL_SWITCH_START_NTFY_API_S_VER_1 */ #endif /* __fw_api_h__ */