/****************************************************************************** * * Copyright(c) 2003 - 2007 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * James P. Ketrenos * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #define IWL 3945 #include "iwlwifi.h" #include "iwl-helpers.h" #include "iwl-3945.h" #include "iwl-3945-rs.h" #define IWL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ IWL_RATE_##r##M_IEEE, \ IWL_RATE_##ip##M_INDEX, \ IWL_RATE_##in##M_INDEX, \ IWL_RATE_##rp##M_INDEX, \ IWL_RATE_##rn##M_INDEX, \ IWL_RATE_##pp##M_INDEX, \ IWL_RATE_##np##M_INDEX, \ IWL_RATE_##r##M_INDEX_TABLE, \ IWL_RATE_##ip##M_INDEX_TABLE } /* * Parameter order: * rate, prev rate, next rate, prev tgg rate, next tgg rate * * If there isn't a valid next or previous rate then INV is used which * maps to IWL_RATE_INVALID * */ const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT] = { IWL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */ IWL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */ IWL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */ IWL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */ IWL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */ IWL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */ IWL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */ IWL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */ IWL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */ IWL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */ IWL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */ IWL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */ }; /* 1 = enable the iwl_disable_events() function */ #define IWL_EVT_DISABLE (0) #define IWL_EVT_DISABLE_SIZE (1532/32) /** * iwl_disable_events - Disable selected events in uCode event log * * Disable an event by writing "1"s into "disable" * bitmap in SRAM. Bit position corresponds to Event # (id/type). * Default values of 0 enable uCode events to be logged. * Use for only special debugging. This function is just a placeholder as-is, * you'll need to provide the special bits! ... * ... and set IWL_EVT_DISABLE to 1. */ void iwl_disable_events(struct iwl_priv *priv) { int rc; int i; u32 base; /* SRAM address of event log header */ u32 disable_ptr; /* SRAM address of event-disable bitmap array */ u32 array_size; /* # of u32 entries in array */ u32 evt_disable[IWL_EVT_DISABLE_SIZE] = { 0x00000000, /* 31 - 0 Event id numbers */ 0x00000000, /* 63 - 32 */ 0x00000000, /* 95 - 64 */ 0x00000000, /* 127 - 96 */ 0x00000000, /* 159 - 128 */ 0x00000000, /* 191 - 160 */ 0x00000000, /* 223 - 192 */ 0x00000000, /* 255 - 224 */ 0x00000000, /* 287 - 256 */ 0x00000000, /* 319 - 288 */ 0x00000000, /* 351 - 320 */ 0x00000000, /* 383 - 352 */ 0x00000000, /* 415 - 384 */ 0x00000000, /* 447 - 416 */ 0x00000000, /* 479 - 448 */ 0x00000000, /* 511 - 480 */ 0x00000000, /* 543 - 512 */ 0x00000000, /* 575 - 544 */ 0x00000000, /* 607 - 576 */ 0x00000000, /* 639 - 608 */ 0x00000000, /* 671 - 640 */ 0x00000000, /* 703 - 672 */ 0x00000000, /* 735 - 704 */ 0x00000000, /* 767 - 736 */ 0x00000000, /* 799 - 768 */ 0x00000000, /* 831 - 800 */ 0x00000000, /* 863 - 832 */ 0x00000000, /* 895 - 864 */ 0x00000000, /* 927 - 896 */ 0x00000000, /* 959 - 928 */ 0x00000000, /* 991 - 960 */ 0x00000000, /* 1023 - 992 */ 0x00000000, /* 1055 - 1024 */ 0x00000000, /* 1087 - 1056 */ 0x00000000, /* 1119 - 1088 */ 0x00000000, /* 1151 - 1120 */ 0x00000000, /* 1183 - 1152 */ 0x00000000, /* 1215 - 1184 */ 0x00000000, /* 1247 - 1216 */ 0x00000000, /* 1279 - 1248 */ 0x00000000, /* 1311 - 1280 */ 0x00000000, /* 1343 - 1312 */ 0x00000000, /* 1375 - 1344 */ 0x00000000, /* 1407 - 1376 */ 0x00000000, /* 1439 - 1408 */ 0x00000000, /* 1471 - 1440 */ 0x00000000, /* 1503 - 1472 */ }; base = le32_to_cpu(priv->card_alive.log_event_table_ptr); if (!iwl_hw_valid_rtc_data_addr(base)) { IWL_ERROR("Invalid event log pointer 0x%08X\n", base); return; } rc = iwl_grab_restricted_access(priv); if (rc) { IWL_WARNING("Can not read from adapter at this time.\n"); return; } disable_ptr = iwl_read_restricted_mem(priv, base + (4 * sizeof(u32))); array_size = iwl_read_restricted_mem(priv, base + (5 * sizeof(u32))); iwl_release_restricted_access(priv); if (IWL_EVT_DISABLE && (array_size == IWL_EVT_DISABLE_SIZE)) { IWL_DEBUG_INFO("Disabling selected uCode log events at 0x%x\n", disable_ptr); rc = iwl_grab_restricted_access(priv); for (i = 0; i < IWL_EVT_DISABLE_SIZE; i++) iwl_write_restricted_mem(priv, disable_ptr + (i * sizeof(u32)), evt_disable[i]); iwl_release_restricted_access(priv); } else { IWL_DEBUG_INFO("Selected uCode log events may be disabled\n"); IWL_DEBUG_INFO(" by writing \"1\"s into disable bitmap\n"); IWL_DEBUG_INFO(" in SRAM at 0x%x, size %d u32s\n", disable_ptr, array_size); } } /** * iwl3945_get_antenna_flags - Get antenna flags for RXON command * @priv: eeprom and antenna fields are used to determine antenna flags * * priv->eeprom is used to determine if antenna AUX/MAIN are reversed * priv->antenna specifies the antenna diversity mode: * * IWL_ANTENNA_DIVERISTY - NIC selects best antenna by itself * IWL_ANTENNA_MAIN - Force MAIN antenna * IWL_ANTENNA_AUX - Force AUX antenna */ __le32 iwl3945_get_antenna_flags(const struct iwl_priv *priv) { switch (priv->antenna) { case IWL_ANTENNA_DIVERSITY: return 0; case IWL_ANTENNA_MAIN: if (priv->eeprom.antenna_switch_type) return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; case IWL_ANTENNA_AUX: if (priv->eeprom.antenna_switch_type) return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK; return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK; } /* bad antenna selector value */ IWL_ERROR("Bad antenna selector value (0x%x)\n", priv->antenna); return 0; /* "diversity" is default if error */ } /***************************************************************************** * * Intel PRO/Wireless 3945ABG/BG Network Connection * * RX handler implementations * * Used by iwl-base.c * *****************************************************************************/ void iwl_hw_rx_statistics(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { struct iwl_rx_packet *pkt = (void *)rxb->skb->data; IWL_DEBUG_RX("Statistics notification received (%d vs %d).\n", (int)sizeof(struct iwl_notif_statistics), le32_to_cpu(pkt->len)); memcpy(&priv->statistics, pkt->u.raw, sizeof(priv->statistics)); priv->last_statistics_time = jiffies; } static void iwl3945_handle_data_packet(struct iwl_priv *priv, int is_data, struct iwl_rx_mem_buffer *rxb, struct ieee80211_rx_status *stats, u16 phy_flags) { struct ieee80211_hdr *hdr; struct iwl_rx_packet *pkt = (struct iwl_rx_packet *)rxb->skb->data; struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt); short len = le16_to_cpu(rx_hdr->len); /* We received data from the HW, so stop the watchdog */ if (unlikely((len + IWL_RX_FRAME_SIZE) > skb_tailroom(rxb->skb))) { IWL_DEBUG_DROP("Corruption detected!\n"); return; } /* We only process data packets if the interface is open */ if (unlikely(!priv->is_open)) { IWL_DEBUG_DROP_LIMIT ("Dropping packet while interface is not open.\n"); return; } if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { if (iwl_param_hwcrypto) iwl_set_decrypted_flag(priv, rxb->skb, le32_to_cpu(rx_end->status), stats); iwl_handle_data_packet_monitor(priv, rxb, IWL_RX_DATA(pkt), len, stats, phy_flags); return; } skb_reserve(rxb->skb, (void *)rx_hdr->payload - (void *)pkt); /* Set the size of the skb to the size of the frame */ skb_put(rxb->skb, le16_to_cpu(rx_hdr->len)); hdr = (void *)rxb->skb->data; if (iwl_param_hwcrypto) iwl_set_decrypted_flag(priv, rxb->skb, le32_to_cpu(rx_end->status), stats); ieee80211_rx_irqsafe(priv->hw, rxb->skb, stats); rxb->skb = NULL; } static void iwl3945_rx_reply_rx(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) { struct iwl_rx_packet *pkt = (void *)rxb->skb->data; struct iwl_rx_frame_stats *rx_stats = IWL_RX_STATS(pkt); struct iwl_rx_frame_hdr *rx_hdr = IWL_RX_HDR(pkt); struct iwl_rx_frame_end *rx_end = IWL_RX_END(pkt); struct ieee80211_hdr *header; u16 phy_flags = le16_to_cpu(rx_hdr->phy_flags); u16 rx_stats_sig_avg = le16_to_cpu(rx_stats->sig_avg); u16 rx_stats_noise_diff = le16_to_cpu(rx_stats->noise_diff); struct ieee80211_rx_status stats = { .mactime = le64_to_cpu(rx_end->timestamp), .freq = ieee80211chan2mhz(le16_to_cpu(rx_hdr->channel)), .channel = le16_to_cpu(rx_hdr->channel), .phymode = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? MODE_IEEE80211G : MODE_IEEE80211A, .antenna = 0, .rate = rx_hdr->rate, .flag = 0, }; u8 network_packet; int snr; if ((unlikely(rx_stats->phy_count > 20))) { IWL_DEBUG_DROP ("dsp size out of range [0,20]: " "%d/n", rx_stats->phy_count); return; } if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) || !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) { IWL_DEBUG_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status); return; } if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { iwl3945_handle_data_packet(priv, 1, rxb, &stats, phy_flags); return; } /* Convert 3945's rssi indicator to dBm */ stats.ssi = rx_stats->rssi - IWL_RSSI_OFFSET; /* Set default noise value to -127 */ if (priv->last_rx_noise == 0) priv->last_rx_noise = IWL_NOISE_MEAS_NOT_AVAILABLE; /* 3945 provides noise info for OFDM frames only. * sig_avg and noise_diff are measured by the 3945's digital signal * processor (DSP), and indicate linear levels of signal level and * distortion/noise within the packet preamble after * automatic gain control (AGC). sig_avg should stay fairly * constant if the radio's AGC is working well. * Since these values are linear (not dB or dBm), linear * signal-to-noise ratio (SNR) is (sig_avg / noise_diff). * Convert linear SNR to dB SNR, then subtract that from rssi dBm * to obtain noise level in dBm. * Calculate stats.signal (quality indicator in %) based on SNR. */ if (rx_stats_noise_diff) { snr = rx_stats_sig_avg / rx_stats_noise_diff; stats.noise = stats.ssi - iwl_calc_db_from_ratio(snr); stats.signal = iwl_calc_sig_qual(stats.ssi, stats.noise); /* If noise info not available, calculate signal quality indicator (%) * using just the dBm signal level. */ } else { stats.noise = priv->last_rx_noise; stats.signal = iwl_calc_sig_qual(stats.ssi, 0); } IWL_DEBUG_STATS("Rssi %d noise %d qual %d sig_avg %d noise_diff %d\n", stats.ssi, stats.noise, stats.signal, rx_stats_sig_avg, rx_stats_noise_diff); stats.freq = ieee80211chan2mhz(stats.channel); /* can be covered by iwl_report_frame() in most cases */ /* IWL_DEBUG_RX("RX status: 0x%08X\n", rx_end->status); */ header = (struct ieee80211_hdr *)IWL_RX_DATA(pkt); network_packet = iwl_is_network_packet(priv, header); #ifdef CONFIG_IWLWIFI_DEBUG if (iwl_debug_level & IWL_DL_STATS && net_ratelimit()) IWL_DEBUG_STATS ("[%c] %d RSSI: %d Signal: %u, Noise: %u, Rate: %u\n", network_packet ? '*' : ' ', stats.channel, stats.ssi, stats.ssi, stats.ssi, stats.rate); if (iwl_debug_level & (IWL_DL_RX)) /* Set "1" to report good data frames in groups of 100 */ iwl_report_frame(priv, pkt, header, 1); #endif if (network_packet) { priv->last_beacon_time = le32_to_cpu(rx_end->beacon_timestamp); priv->last_tsf = le64_to_cpu(rx_end->timestamp); priv->last_rx_rssi = stats.ssi; priv->last_rx_noise = stats.noise; } switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_FTYPE) { case IEEE80211_FTYPE_MGMT: switch (le16_to_cpu(header->frame_control) & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_PROBE_RESP: case IEEE80211_STYPE_BEACON:{ /* If this is a beacon or probe response for * our network then cache the beacon * timestamp */ if ((((priv->iw_mode == IEEE80211_IF_TYPE_STA) && !compare_ether_addr(header->addr2, priv->bssid)) || ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && !compare_ether_addr(header->addr3, priv->bssid)))) { struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)header; __le32 *pos; pos = (__le32 *) & mgmt->u.beacon. timestamp; priv->timestamp0 = le32_to_cpu(pos[0]); priv->timestamp1 = le32_to_cpu(pos[1]); priv->beacon_int = le16_to_cpu( mgmt->u.beacon.beacon_int); if (priv->call_post_assoc_from_beacon && (priv->iw_mode == IEEE80211_IF_TYPE_STA)) queue_work(priv->workqueue, &priv->post_associate.work); priv->call_post_assoc_from_beacon = 0; } break; } case IEEE80211_STYPE_ACTION: /* TODO: Parse 802.11h frames for CSA... */ break; /* * TODO: There is no callback function from upper * stack to inform us when associated status. this * work around to sniff assoc_resp management frame * and finish the association process. */ case IEEE80211_STYPE_ASSOC_RESP: case IEEE80211_STYPE_REASSOC_RESP:{ struct ieee80211_mgmt *mgnt = (struct ieee80211_mgmt *)header; priv->assoc_id = (~((1 << 15) | (1 << 14)) & le16_to_cpu(mgnt->u. assoc_resp.aid)); priv->assoc_capability = le16_to_cpu(mgnt->u.assoc_resp.capab_info); if (priv->beacon_int) queue_work(priv->workqueue, &priv->post_associate.work); else priv->call_post_assoc_from_beacon = 1; break; } case IEEE80211_STYPE_PROBE_REQ:{ DECLARE_MAC_BUF(mac1); DECLARE_MAC_BUF(mac2); DECLARE_MAC_BUF(mac3); if (priv->iw_mode == IEEE80211_IF_TYPE_IBSS) IWL_DEBUG_DROP ("Dropping (non network): %s" ", %s, %s\n", print_mac(mac1, header->addr1), print_mac(mac2, header->addr2), print_mac(mac3, header->addr3)); return; } } iwl3945_handle_data_packet(priv, 0, rxb, &stats, phy_flags); break; case IEEE80211_FTYPE_CTL: break; case IEEE80211_FTYPE_DATA: { DECLARE_MAC_BUF(mac1); DECLARE_MAC_BUF(mac2); DECLARE_MAC_BUF(mac3); if (unlikely(is_duplicate_packet(priv, header))) IWL_DEBUG_DROP("Dropping (dup): %s, %s, %s\n", print_mac(mac1, header->addr1), print_mac(mac2, header->addr2), print_mac(mac3, header->addr3)); else iwl3945_handle_data_packet(priv, 1, rxb, &stats, phy_flags); break; } } } int iwl_hw_txq_attach_buf_to_tfd(struct iwl_priv *priv, void *ptr, dma_addr_t addr, u16 len) { int count; u32 pad; struct iwl_tfd_frame *tfd = (struct iwl_tfd_frame *)ptr; count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags)); pad = TFD_CTL_PAD_GET(le32_to_cpu(tfd->control_flags)); if ((count >= NUM_TFD_CHUNKS) || (count < 0)) { IWL_ERROR("Error can not send more than %d chunks\n", NUM_TFD_CHUNKS); return -EINVAL; } tfd->pa[count].addr = cpu_to_le32(addr); tfd->pa[count].len = cpu_to_le32(len); count++; tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) | TFD_CTL_PAD_SET(pad)); return 0; } /** * iwl_hw_txq_free_tfd - Free one TFD, those at index [txq->q.read_ptr] * * Does NOT advance any indexes */ int iwl_hw_txq_free_tfd(struct iwl_priv *priv, struct iwl_tx_queue *txq) { struct iwl_tfd_frame *bd_tmp = (struct iwl_tfd_frame *)&txq->bd[0]; struct iwl_tfd_frame *bd = &bd_tmp[txq->q.read_ptr]; struct pci_dev *dev = priv->pci_dev; int i; int counter; /* classify bd */ if (txq->q.id == IWL_CMD_QUEUE_NUM) /* nothing to cleanup after for host commands */ return 0; /* sanity check */ counter = TFD_CTL_COUNT_GET(le32_to_cpu(bd->control_flags)); if (counter > NUM_TFD_CHUNKS) { IWL_ERROR("Too many chunks: %i\n", counter); /* @todo issue fatal error, it is quite serious situation */ return 0; } /* unmap chunks if any */ for (i = 1; i < counter; i++) { pci_unmap_single(dev, le32_to_cpu(bd->pa[i].addr), le32_to_cpu(bd->pa[i].len), PCI_DMA_TODEVICE); if (txq->txb[txq->q.read_ptr].skb[0]) { struct sk_buff *skb = txq->txb[txq->q.read_ptr].skb[0]; if (txq->txb[txq->q.read_ptr].skb[0]) { /* Can be called from interrupt context */ dev_kfree_skb_any(skb); txq->txb[txq->q.read_ptr].skb[0] = NULL; } } } return 0; } u8 iwl_hw_find_station(struct iwl_priv *priv, const u8 *addr) { int i; int ret = IWL_INVALID_STATION; unsigned long flags; DECLARE_MAC_BUF(mac); spin_lock_irqsave(&priv->sta_lock, flags); for (i = IWL_STA_ID; i < priv->hw_setting.max_stations; i++) if ((priv->stations[i].used) && (!compare_ether_addr (priv->stations[i].sta.sta.addr, addr))) { ret = i; goto out; } IWL_DEBUG_INFO("can not find STA %s (total %d)\n", print_mac(mac, addr), priv->num_stations); out: spin_unlock_irqrestore(&priv->sta_lock, flags); return ret; } /** * iwl_hw_build_tx_cmd_rate - Add rate portion to TX_CMD: * */ void iwl_hw_build_tx_cmd_rate(struct iwl_priv *priv, struct iwl_cmd *cmd, struct ieee80211_tx_control *ctrl, struct ieee80211_hdr *hdr, int sta_id, int tx_id) { unsigned long flags; u16 rate_index = min(ctrl->tx_rate & 0xffff, IWL_RATE_COUNT - 1); u16 rate_mask; int rate; u8 rts_retry_limit; u8 data_retry_limit; __le32 tx_flags; u16 fc = le16_to_cpu(hdr->frame_control); rate = iwl_rates[rate_index].plcp; tx_flags = cmd->cmd.tx.tx_flags; /* We need to figure out how to get the sta->supp_rates while * in this running context; perhaps encoding into ctrl->tx_rate? */ rate_mask = IWL_RATES_MASK; spin_lock_irqsave(&priv->sta_lock, flags); priv->stations[sta_id].current_rate.rate_n_flags = rate; if ((priv->iw_mode == IEEE80211_IF_TYPE_IBSS) && (sta_id != IWL3945_BROADCAST_ID) && (sta_id != IWL_MULTICAST_ID)) priv->stations[IWL_STA_ID].current_rate.rate_n_flags = rate; spin_unlock_irqrestore(&priv->sta_lock, flags); if (tx_id >= IWL_CMD_QUEUE_NUM) rts_retry_limit = 3; else rts_retry_limit = 7; if (ieee80211_is_probe_response(fc)) { data_retry_limit = 3; if (data_retry_limit < rts_retry_limit) rts_retry_limit = data_retry_limit; } else data_retry_limit = IWL_DEFAULT_TX_RETRY; if (priv->data_retry_limit != -1) data_retry_limit = priv->data_retry_limit; if ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_MGMT) { switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_AUTH: case IEEE80211_STYPE_DEAUTH: case IEEE80211_STYPE_ASSOC_REQ: case IEEE80211_STYPE_REASSOC_REQ: if (tx_flags & TX_CMD_FLG_RTS_MSK) { tx_flags &= ~TX_CMD_FLG_RTS_MSK; tx_flags |= TX_CMD_FLG_CTS_MSK; } break; default: break; } } cmd->cmd.tx.rts_retry_limit = rts_retry_limit; cmd->cmd.tx.data_retry_limit = data_retry_limit; cmd->cmd.tx.rate = rate; cmd->cmd.tx.tx_flags = tx_flags; /* OFDM */ cmd->cmd.tx.supp_rates[0] = ((rate_mask & IWL_OFDM_RATES_MASK) >> IWL_FIRST_OFDM_RATE) & 0xFF; /* CCK */ cmd->cmd.tx.supp_rates[1] = (rate_mask & 0xF); IWL_DEBUG_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X " "cck/ofdm mask: 0x%x/0x%x\n", sta_id, cmd->cmd.tx.rate, le32_to_cpu(cmd->cmd.tx.tx_flags), cmd->cmd.tx.supp_rates[1], cmd->cmd.tx.supp_rates[0]); } u8 iwl3945_sync_sta(struct iwl_priv *priv, int sta_id, u16 tx_rate, u8 flags) { unsigned long flags_spin; struct iwl_station_entry *station; if (sta_id == IWL_INVALID_STATION) return IWL_INVALID_STATION; spin_lock_irqsave(&priv->sta_lock, flags_spin); station = &priv->stations[sta_id]; station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK; station->sta.rate_n_flags = cpu_to_le16(tx_rate); station->current_rate.rate_n_flags = tx_rate; station->sta.mode = STA_CONTROL_MODIFY_MSK; spin_unlock_irqrestore(&priv->sta_lock, flags_spin); iwl_send_add_station(priv, &station->sta, flags); IWL_DEBUG_RATE("SCALE sync station %d to rate %d\n", sta_id, tx_rate); return sta_id; } void iwl_hw_card_show_info(struct iwl_priv *priv) { IWL_DEBUG_INFO("3945ABG HW Version %u.%u.%u\n", ((priv->eeprom.board_revision >> 8) & 0x0F), ((priv->eeprom.board_revision >> 8) >> 4), (priv->eeprom.board_revision & 0x00FF)); IWL_DEBUG_INFO("3945ABG PBA Number %.*s\n", (int)sizeof(priv->eeprom.board_pba_number), priv->eeprom.board_pba_number); IWL_DEBUG_INFO("EEPROM_ANTENNA_SWITCH_TYPE is 0x%02X\n", priv->eeprom.antenna_switch_type); } static int iwl3945_nic_set_pwr_src(struct iwl_priv *priv, int pwr_max) { int rc; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } if (!pwr_max) { u32 val; rc = pci_read_config_dword(priv->pci_dev, PCI_POWER_SOURCE, &val); if (val & PCI_CFG_PMC_PME_FROM_D3COLD_SUPPORT) { iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_PWR_SRC_VAUX, ~APMG_PS_CTRL_MSK_PWR_SRC); iwl_release_restricted_access(priv); iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VAUX_PWR_SRC, CSR_GPIO_IN_BIT_AUX_POWER, 5000); } else iwl_release_restricted_access(priv); } else { iwl_set_bits_mask_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_PWR_SRC_VMAIN, ~APMG_PS_CTRL_MSK_PWR_SRC); iwl_release_restricted_access(priv); iwl_poll_bit(priv, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC, CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */ } spin_unlock_irqrestore(&priv->lock, flags); return rc; } static int iwl3945_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq) { int rc; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } iwl_write_restricted(priv, FH_RCSR_RBD_BASE(0), rxq->dma_addr); iwl_write_restricted(priv, FH_RCSR_RPTR_ADDR(0), priv->hw_setting.shared_phys + offsetof(struct iwl_shared, rx_read_ptr[0])); iwl_write_restricted(priv, FH_RCSR_WPTR(0), 0); iwl_write_restricted(priv, FH_RCSR_CONFIG(0), ALM_FH_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE | ALM_FH_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE | ALM_FH_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN | ALM_FH_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 | (RX_QUEUE_SIZE_LOG << ALM_FH_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) | ALM_FH_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST | (1 << ALM_FH_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) | ALM_FH_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH); /* fake read to flush all prev I/O */ iwl_read_restricted(priv, FH_RSSR_CTRL); iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); return 0; } static int iwl3945_tx_reset(struct iwl_priv *priv) { int rc; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } /* bypass mode */ iwl_write_prph(priv, SCD_MODE_REG, 0x2); /* RA 0 is active */ iwl_write_prph(priv, SCD_ARASTAT_REG, 0x01); /* all 6 fifo are active */ iwl_write_prph(priv, SCD_TXFACT_REG, 0x3f); iwl_write_prph(priv, SCD_SBYP_MODE_1_REG, 0x010000); iwl_write_prph(priv, SCD_SBYP_MODE_2_REG, 0x030002); iwl_write_prph(priv, SCD_TXF4MF_REG, 0x000004); iwl_write_prph(priv, SCD_TXF5MF_REG, 0x000005); iwl_write_restricted(priv, FH_TSSR_CBB_BASE, priv->hw_setting.shared_phys); iwl_write_restricted(priv, FH_TSSR_MSG_CONFIG, ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH | ALM_FH_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH); iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); return 0; } /** * iwl3945_txq_ctx_reset - Reset TX queue context * * Destroys all DMA structures and initialize them again */ static int iwl3945_txq_ctx_reset(struct iwl_priv *priv) { int rc; int txq_id, slots_num; iwl_hw_txq_ctx_free(priv); /* Tx CMD queue */ rc = iwl3945_tx_reset(priv); if (rc) goto error; /* Tx queue(s) */ for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) { slots_num = (txq_id == IWL_CMD_QUEUE_NUM) ? TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS; rc = iwl_tx_queue_init(priv, &priv->txq[txq_id], slots_num, txq_id); if (rc) { IWL_ERROR("Tx %d queue init failed\n", txq_id); goto error; } } return rc; error: iwl_hw_txq_ctx_free(priv); return rc; } int iwl_hw_nic_init(struct iwl_priv *priv) { u8 rev_id; int rc; unsigned long flags; struct iwl_rx_queue *rxq = &priv->rxq; iwl_power_init_handle(priv); spin_lock_irqsave(&priv->lock, flags); iwl_set_bit(priv, CSR_ANA_PLL_CFG, (1 << 24)); iwl_set_bit(priv, CSR_GIO_CHICKEN_BITS, CSR_GIO_CHICKEN_BITS_REG_BIT_L1A_NO_L0S_RX); iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); rc = iwl_poll_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); if (rc < 0) { spin_unlock_irqrestore(&priv->lock, flags); IWL_DEBUG_INFO("Failed to init the card\n"); return rc; } rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); udelay(20); iwl_set_bits_prph(priv, APMG_PCIDEV_STT_REG, APMG_PCIDEV_STT_VAL_L1_ACT_DIS); iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); /* Determine HW type */ rc = pci_read_config_byte(priv->pci_dev, PCI_REVISION_ID, &rev_id); if (rc) return rc; IWL_DEBUG_INFO("HW Revision ID = 0x%X\n", rev_id); iwl3945_nic_set_pwr_src(priv, 1); spin_lock_irqsave(&priv->lock, flags); if (rev_id & PCI_CFG_REV_ID_BIT_RTP) IWL_DEBUG_INFO("RTP type \n"); else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) { IWL_DEBUG_INFO("ALM-MB type\n"); iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MB); } else { IWL_DEBUG_INFO("ALM-MM type\n"); iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_ALMAGOR_MM); } spin_unlock_irqrestore(&priv->lock, flags); /* Initialize the EEPROM */ rc = iwl_eeprom_init(priv); if (rc) return rc; spin_lock_irqsave(&priv->lock, flags); if (EEPROM_SKU_CAP_OP_MODE_MRC == priv->eeprom.sku_cap) { IWL_DEBUG_INFO("SKU OP mode is mrc\n"); iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_SKU_MRC); } else IWL_DEBUG_INFO("SKU OP mode is basic\n"); if ((priv->eeprom.board_revision & 0xF0) == 0xD0) { IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", priv->eeprom.board_revision); iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); } else { IWL_DEBUG_INFO("3945ABG revision is 0x%X\n", priv->eeprom.board_revision); iwl_clear_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BIT_BOARD_TYPE); } if (priv->eeprom.almgor_m_version <= 1) { iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A); IWL_DEBUG_INFO("Card M type A version is 0x%X\n", priv->eeprom.almgor_m_version); } else { IWL_DEBUG_INFO("Card M type B version is 0x%X\n", priv->eeprom.almgor_m_version); iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B); } spin_unlock_irqrestore(&priv->lock, flags); if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE) IWL_DEBUG_RF_KILL("SW RF KILL supported in EEPROM.\n"); if (priv->eeprom.sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE) IWL_DEBUG_RF_KILL("HW RF KILL supported in EEPROM.\n"); /* Allocate the RX queue, or reset if it is already allocated */ if (!rxq->bd) { rc = iwl_rx_queue_alloc(priv); if (rc) { IWL_ERROR("Unable to initialize Rx queue\n"); return -ENOMEM; } } else iwl_rx_queue_reset(priv, rxq); iwl_rx_replenish(priv); iwl3945_rx_init(priv, rxq); spin_lock_irqsave(&priv->lock, flags); /* Look at using this instead: rxq->need_update = 1; iwl_rx_queue_update_write_ptr(priv, rxq); */ rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } iwl_write_restricted(priv, FH_RCSR_WPTR(0), rxq->write & ~7); iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); rc = iwl3945_txq_ctx_reset(priv); if (rc) return rc; set_bit(STATUS_INIT, &priv->status); return 0; } /** * iwl_hw_txq_ctx_free - Free TXQ Context * * Destroy all TX DMA queues and structures */ void iwl_hw_txq_ctx_free(struct iwl_priv *priv) { int txq_id; /* Tx queues */ for (txq_id = 0; txq_id < TFD_QUEUE_MAX; txq_id++) iwl_tx_queue_free(priv, &priv->txq[txq_id]); } void iwl_hw_txq_ctx_stop(struct iwl_priv *priv) { int queue; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); if (iwl_grab_restricted_access(priv)) { spin_unlock_irqrestore(&priv->lock, flags); iwl_hw_txq_ctx_free(priv); return; } /* stop SCD */ iwl_write_prph(priv, SCD_MODE_REG, 0); /* reset TFD queues */ for (queue = TFD_QUEUE_MIN; queue < TFD_QUEUE_MAX; queue++) { iwl_write_restricted(priv, FH_TCSR_CONFIG(queue), 0x0); iwl_poll_restricted_bit(priv, FH_TSSR_TX_STATUS, ALM_FH_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(queue), 1000); } iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); iwl_hw_txq_ctx_free(priv); } int iwl_hw_nic_stop_master(struct iwl_priv *priv) { int rc = 0; u32 reg_val; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); /* set stop master bit */ iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_STOP_MASTER); reg_val = iwl_read32(priv, CSR_GP_CNTRL); if (CSR_GP_CNTRL_REG_FLAG_MAC_POWER_SAVE == (reg_val & CSR_GP_CNTRL_REG_MSK_POWER_SAVE_TYPE)) IWL_DEBUG_INFO("Card in power save, master is already " "stopped\n"); else { rc = iwl_poll_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_MASTER_DISABLED, CSR_RESET_REG_FLAG_MASTER_DISABLED, 100); if (rc < 0) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } } spin_unlock_irqrestore(&priv->lock, flags); IWL_DEBUG_INFO("stop master\n"); return rc; } int iwl_hw_nic_reset(struct iwl_priv *priv) { int rc; unsigned long flags; iwl_hw_nic_stop_master(priv); spin_lock_irqsave(&priv->lock, flags); iwl_set_bit(priv, CSR_RESET, CSR_RESET_REG_FLAG_SW_RESET); rc = iwl_poll_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY, 25000); rc = iwl_grab_restricted_access(priv); if (!rc) { iwl_write_prph(priv, APMG_CLK_CTRL_REG, APMG_CLK_VAL_BSM_CLK_RQT); udelay(10); iwl_set_bit(priv, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_INIT_DONE); iwl_write_prph(priv, APMG_RTC_INT_MSK_REG, 0x0); iwl_write_prph(priv, APMG_RTC_INT_STT_REG, 0xFFFFFFFF); /* enable DMA */ iwl_write_prph(priv, APMG_CLK_EN_REG, APMG_CLK_VAL_DMA_CLK_RQT | APMG_CLK_VAL_BSM_CLK_RQT); udelay(10); iwl_set_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); udelay(5); iwl_clear_bits_prph(priv, APMG_PS_CTRL_REG, APMG_PS_CTRL_VAL_RESET_REQ); iwl_release_restricted_access(priv); } /* Clear the 'host command active' bit... */ clear_bit(STATUS_HCMD_ACTIVE, &priv->status); wake_up_interruptible(&priv->wait_command_queue); spin_unlock_irqrestore(&priv->lock, flags); return rc; } /** * iwl_hw_reg_adjust_power_by_temp * return index delta into power gain settings table */ static int iwl_hw_reg_adjust_power_by_temp(int new_reading, int old_reading) { return (new_reading - old_reading) * (-11) / 100; } /** * iwl_hw_reg_temp_out_of_range - Keep temperature in sane range */ static inline int iwl_hw_reg_temp_out_of_range(int temperature) { return (((temperature < -260) || (temperature > 25)) ? 1 : 0); } int iwl_hw_get_temperature(struct iwl_priv *priv) { return iwl_read32(priv, CSR_UCODE_DRV_GP2); } /** * iwl_hw_reg_txpower_get_temperature * get the current temperature by reading from NIC */ static int iwl_hw_reg_txpower_get_temperature(struct iwl_priv *priv) { int temperature; temperature = iwl_hw_get_temperature(priv); /* driver's okay range is -260 to +25. * human readable okay range is 0 to +285 */ IWL_DEBUG_INFO("Temperature: %d\n", temperature + IWL_TEMP_CONVERT); /* handle insane temp reading */ if (iwl_hw_reg_temp_out_of_range(temperature)) { IWL_ERROR("Error bad temperature value %d\n", temperature); /* if really really hot(?), * substitute the 3rd band/group's temp measured at factory */ if (priv->last_temperature > 100) temperature = priv->eeprom.groups[2].temperature; else /* else use most recent "sane" value from driver */ temperature = priv->last_temperature; } return temperature; /* raw, not "human readable" */ } /* Adjust Txpower only if temperature variance is greater than threshold. * * Both are lower than older versions' 9 degrees */ #define IWL_TEMPERATURE_LIMIT_TIMER 6 /** * is_temp_calib_needed - determines if new calibration is needed * * records new temperature in tx_mgr->temperature. * replaces tx_mgr->last_temperature *only* if calib needed * (assumes caller will actually do the calibration!). */ static int is_temp_calib_needed(struct iwl_priv *priv) { int temp_diff; priv->temperature = iwl_hw_reg_txpower_get_temperature(priv); temp_diff = priv->temperature - priv->last_temperature; /* get absolute value */ if (temp_diff < 0) { IWL_DEBUG_POWER("Getting cooler, delta %d,\n", temp_diff); temp_diff = -temp_diff; } else if (temp_diff == 0) IWL_DEBUG_POWER("Same temp,\n"); else IWL_DEBUG_POWER("Getting warmer, delta %d,\n", temp_diff); /* if we don't need calibration, *don't* update last_temperature */ if (temp_diff < IWL_TEMPERATURE_LIMIT_TIMER) { IWL_DEBUG_POWER("Timed thermal calib not needed\n"); return 0; } IWL_DEBUG_POWER("Timed thermal calib needed\n"); /* assume that caller will actually do calib ... * update the "last temperature" value */ priv->last_temperature = priv->temperature; return 1; } #define IWL_MAX_GAIN_ENTRIES 78 #define IWL_CCK_FROM_OFDM_POWER_DIFF -5 #define IWL_CCK_FROM_OFDM_INDEX_DIFF (10) /* radio and DSP power table, each step is 1/2 dB. * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */ static struct iwl_tx_power power_gain_table[2][IWL_MAX_GAIN_ENTRIES] = { { {251, 127}, /* 2.4 GHz, highest power */ {251, 127}, {251, 127}, {251, 127}, {251, 125}, {251, 110}, {251, 105}, {251, 98}, {187, 125}, {187, 115}, {187, 108}, {187, 99}, {243, 119}, {243, 111}, {243, 105}, {243, 97}, {243, 92}, {211, 106}, {211, 100}, {179, 120}, {179, 113}, {179, 107}, {147, 125}, {147, 119}, {147, 112}, {147, 106}, {147, 101}, {147, 97}, {147, 91}, {115, 107}, {235, 121}, {235, 115}, {235, 109}, {203, 127}, {203, 121}, {203, 115}, {203, 108}, {203, 102}, {203, 96}, {203, 92}, {171, 110}, {171, 104}, {171, 98}, {139, 116}, {227, 125}, {227, 119}, {227, 113}, {227, 107}, {227, 101}, {227, 96}, {195, 113}, {195, 106}, {195, 102}, {195, 95}, {163, 113}, {163, 106}, {163, 102}, {163, 95}, {131, 113}, {131, 106}, {131, 102}, {131, 95}, {99, 113}, {99, 106}, {99, 102}, {99, 95}, {67, 113}, {67, 106}, {67, 102}, {67, 95}, {35, 113}, {35, 106}, {35, 102}, {35, 95}, {3, 113}, {3, 106}, {3, 102}, {3, 95} }, /* 2.4 GHz, lowest power */ { {251, 127}, /* 5.x GHz, highest power */ {251, 120}, {251, 114}, {219, 119}, {219, 101}, {187, 113}, {187, 102}, {155, 114}, {155, 103}, {123, 117}, {123, 107}, {123, 99}, {123, 92}, {91, 108}, {59, 125}, {59, 118}, {59, 109}, {59, 102}, {59, 96}, {59, 90}, {27, 104}, {27, 98}, {27, 92}, {115, 118}, {115, 111}, {115, 104}, {83, 126}, {83, 121}, {83, 113}, {83, 105}, {83, 99}, {51, 118}, {51, 111}, {51, 104}, {51, 98}, {19, 116}, {19, 109}, {19, 102}, {19, 98}, {19, 93}, {171, 113}, {171, 107}, {171, 99}, {139, 120}, {139, 113}, {139, 107}, {139, 99}, {107, 120}, {107, 113}, {107, 107}, {107, 99}, {75, 120}, {75, 113}, {75, 107}, {75, 99}, {43, 120}, {43, 113}, {43, 107}, {43, 99}, {11, 120}, {11, 113}, {11, 107}, {11, 99}, {131, 107}, {131, 99}, {99, 120}, {99, 113}, {99, 107}, {99, 99}, {67, 120}, {67, 113}, {67, 107}, {67, 99}, {35, 120}, {35, 113}, {35, 107}, {35, 99}, {3, 120} } /* 5.x GHz, lowest power */ }; static inline u8 iwl_hw_reg_fix_power_index(int index) { if (index < 0) return 0; if (index >= IWL_MAX_GAIN_ENTRIES) return IWL_MAX_GAIN_ENTRIES - 1; return (u8) index; } /* Kick off thermal recalibration check every 60 seconds */ #define REG_RECALIB_PERIOD (60) /** * iwl_hw_reg_set_scan_power - Set Tx power for scan probe requests * * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK) * or 6 Mbit (OFDM) rates. */ static void iwl_hw_reg_set_scan_power(struct iwl_priv *priv, u32 scan_tbl_index, s32 rate_index, const s8 *clip_pwrs, struct iwl_channel_info *ch_info, int band_index) { struct iwl_scan_power_info *scan_power_info; s8 power; u8 power_index; scan_power_info = &ch_info->scan_pwr_info[scan_tbl_index]; /* use this channel group's 6Mbit clipping/saturation pwr, * but cap at regulatory scan power restriction (set during init * based on eeprom channel data) for this channel. */ power = min(ch_info->scan_power, clip_pwrs[IWL_RATE_6M_INDEX_TABLE]); /* further limit to user's max power preference. * FIXME: Other spectrum management power limitations do not * seem to apply?? */ power = min(power, priv->user_txpower_limit); scan_power_info->requested_power = power; /* find difference between new scan *power* and current "normal" * Tx *power* for 6Mb. Use this difference (x2) to adjust the * current "normal" temperature-compensated Tx power *index* for * this rate (1Mb or 6Mb) to yield new temp-compensated scan power * *index*. */ power_index = ch_info->power_info[rate_index].power_table_index - (power - ch_info->power_info [IWL_RATE_6M_INDEX_TABLE].requested_power) * 2; /* store reference index that we use when adjusting *all* scan * powers. So we can accommodate user (all channel) or spectrum * management (single channel) power changes "between" temperature * feedback compensation procedures. * don't force fit this reference index into gain table; it may be a * negative number. This will help avoid errors when we're at * the lower bounds (highest gains, for warmest temperatures) * of the table. */ /* don't exceed table bounds for "real" setting */ power_index = iwl_hw_reg_fix_power_index(power_index); scan_power_info->power_table_index = power_index; scan_power_info->tpc.tx_gain = power_gain_table[band_index][power_index].tx_gain; scan_power_info->tpc.dsp_atten = power_gain_table[band_index][power_index].dsp_atten; } /** * iwl_hw_reg_send_txpower - fill in Tx Power command with gain settings * * Configures power settings for all rates for the current channel, * using values from channel info struct, and send to NIC */ int iwl_hw_reg_send_txpower(struct iwl_priv *priv) { int rate_idx, i; const struct iwl_channel_info *ch_info = NULL; struct iwl_txpowertable_cmd txpower = { .channel = priv->active_rxon.channel, }; txpower.band = (priv->phymode == MODE_IEEE80211A) ? 0 : 1; ch_info = iwl_get_channel_info(priv, priv->phymode, le16_to_cpu(priv->active_rxon.channel)); if (!ch_info) { IWL_ERROR ("Failed to get channel info for channel %d [%d]\n", le16_to_cpu(priv->active_rxon.channel), priv->phymode); return -EINVAL; } if (!is_channel_valid(ch_info)) { IWL_DEBUG_POWER("Not calling TX_PWR_TABLE_CMD on " "non-Tx channel.\n"); return 0; } /* fill cmd with power settings for all rates for current channel */ /* Fill OFDM rate */ for (rate_idx = IWL_FIRST_OFDM_RATE, i = 0; rate_idx <= IWL_LAST_OFDM_RATE; rate_idx++, i++) { txpower.power[i].tpc = ch_info->power_info[i].tpc; txpower.power[i].rate = iwl_rates[rate_idx].plcp; IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", le16_to_cpu(txpower.channel), txpower.band, txpower.power[i].tpc.tx_gain, txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); } /* Fill CCK rates */ for (rate_idx = IWL_FIRST_CCK_RATE; rate_idx <= IWL_LAST_CCK_RATE; rate_idx++, i++) { txpower.power[i].tpc = ch_info->power_info[i].tpc; txpower.power[i].rate = iwl_rates[rate_idx].plcp; IWL_DEBUG_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n", le16_to_cpu(txpower.channel), txpower.band, txpower.power[i].tpc.tx_gain, txpower.power[i].tpc.dsp_atten, txpower.power[i].rate); } return iwl_send_cmd_pdu(priv, REPLY_TX_PWR_TABLE_CMD, sizeof(struct iwl_txpowertable_cmd), &txpower); } /** * iwl_hw_reg_set_new_power - Configures power tables at new levels * @ch_info: Channel to update. Uses power_info.requested_power. * * Replace requested_power and base_power_index ch_info fields for * one channel. * * Called if user or spectrum management changes power preferences. * Takes into account h/w and modulation limitations (clip power). * * This does *not* send anything to NIC, just sets up ch_info for one channel. * * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to * properly fill out the scan powers, and actual h/w gain settings, * and send changes to NIC */ static int iwl_hw_reg_set_new_power(struct iwl_priv *priv, struct iwl_channel_info *ch_info) { struct iwl_channel_power_info *power_info; int power_changed = 0; int i; const s8 *clip_pwrs; int power; /* Get this chnlgrp's rate-to-max/clip-powers table */ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; /* Get this channel's rate-to-current-power settings table */ power_info = ch_info->power_info; /* update OFDM Txpower settings */ for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; i++, ++power_info) { int delta_idx; /* limit new power to be no more than h/w capability */ power = min(ch_info->curr_txpow, clip_pwrs[i]); if (power == power_info->requested_power) continue; /* find difference between old and new requested powers, * update base (non-temp-compensated) power index */ delta_idx = (power - power_info->requested_power) * 2; power_info->base_power_index -= delta_idx; /* save new requested power value */ power_info->requested_power = power; power_changed = 1; } /* update CCK Txpower settings, based on OFDM 12M setting ... * ... all CCK power settings for a given channel are the *same*. */ if (power_changed) { power = ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; /* do all CCK rates' iwl_channel_power_info structures */ for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) { power_info->requested_power = power; power_info->base_power_index = ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]. base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; ++power_info; } } return 0; } /** * iwl_hw_reg_get_ch_txpower_limit - returns new power limit for channel * * NOTE: Returned power limit may be less (but not more) than requested, * based strictly on regulatory (eeprom and spectrum mgt) limitations * (no consideration for h/w clipping limitations). */ static int iwl_hw_reg_get_ch_txpower_limit(struct iwl_channel_info *ch_info) { s8 max_power; #if 0 /* if we're using TGd limits, use lower of TGd or EEPROM */ if (ch_info->tgd_data.max_power != 0) max_power = min(ch_info->tgd_data.max_power, ch_info->eeprom.max_power_avg); /* else just use EEPROM limits */ else #endif max_power = ch_info->eeprom.max_power_avg; return min(max_power, ch_info->max_power_avg); } /** * iwl_hw_reg_comp_txpower_temp - Compensate for temperature * * Compensate txpower settings of *all* channels for temperature. * This only accounts for the difference between current temperature * and the factory calibration temperatures, and bases the new settings * on the channel's base_power_index. * * If RxOn is "associated", this sends the new Txpower to NIC! */ static int iwl_hw_reg_comp_txpower_temp(struct iwl_priv *priv) { struct iwl_channel_info *ch_info = NULL; int delta_index; const s8 *clip_pwrs; /* array of h/w max power levels for each rate */ u8 a_band; u8 rate_index; u8 scan_tbl_index; u8 i; int ref_temp; int temperature = priv->temperature; /* set up new Tx power info for each and every channel, 2.4 and 5.x */ for (i = 0; i < priv->channel_count; i++) { ch_info = &priv->channel_info[i]; a_band = is_channel_a_band(ch_info); /* Get this chnlgrp's factory calibration temperature */ ref_temp = (s16)priv->eeprom.groups[ch_info->group_index]. temperature; /* get power index adjustment based on curr and factory * temps */ delta_index = iwl_hw_reg_adjust_power_by_temp(temperature, ref_temp); /* set tx power value for all rates, OFDM and CCK */ for (rate_index = 0; rate_index < IWL_RATE_COUNT; rate_index++) { int power_idx = ch_info->power_info[rate_index].base_power_index; /* temperature compensate */ power_idx += delta_index; /* stay within table range */ power_idx = iwl_hw_reg_fix_power_index(power_idx); ch_info->power_info[rate_index]. power_table_index = (u8) power_idx; ch_info->power_info[rate_index].tpc = power_gain_table[a_band][power_idx]; } /* Get this chnlgrp's rate-to-max/clip-powers table */ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ for (scan_tbl_index = 0; scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { s32 actual_index = (scan_tbl_index == 0) ? IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; iwl_hw_reg_set_scan_power(priv, scan_tbl_index, actual_index, clip_pwrs, ch_info, a_band); } } /* send Txpower command for current channel to ucode */ return iwl_hw_reg_send_txpower(priv); } int iwl_hw_reg_set_txpower(struct iwl_priv *priv, s8 power) { struct iwl_channel_info *ch_info; s8 max_power; u8 a_band; u8 i; if (priv->user_txpower_limit == power) { IWL_DEBUG_POWER("Requested Tx power same as current " "limit: %ddBm.\n", power); return 0; } IWL_DEBUG_POWER("Setting upper limit clamp to %ddBm.\n", power); priv->user_txpower_limit = power; /* set up new Tx powers for each and every channel, 2.4 and 5.x */ for (i = 0; i < priv->channel_count; i++) { ch_info = &priv->channel_info[i]; a_band = is_channel_a_band(ch_info); /* find minimum power of all user and regulatory constraints * (does not consider h/w clipping limitations) */ max_power = iwl_hw_reg_get_ch_txpower_limit(ch_info); max_power = min(power, max_power); if (max_power != ch_info->curr_txpow) { ch_info->curr_txpow = max_power; /* this considers the h/w clipping limitations */ iwl_hw_reg_set_new_power(priv, ch_info); } } /* update txpower settings for all channels, * send to NIC if associated. */ is_temp_calib_needed(priv); iwl_hw_reg_comp_txpower_temp(priv); return 0; } /* will add 3945 channel switch cmd handling later */ int iwl_hw_channel_switch(struct iwl_priv *priv, u16 channel) { return 0; } /** * iwl3945_reg_txpower_periodic - called when time to check our temperature. * * -- reset periodic timer * -- see if temp has changed enough to warrant re-calibration ... if so: * -- correct coeffs for temp (can reset temp timer) * -- save this temp as "last", * -- send new set of gain settings to NIC * NOTE: This should continue working, even when we're not associated, * so we can keep our internal table of scan powers current. */ void iwl3945_reg_txpower_periodic(struct iwl_priv *priv) { /* This will kick in the "brute force" * iwl_hw_reg_comp_txpower_temp() below */ if (!is_temp_calib_needed(priv)) goto reschedule; /* Set up a new set of temp-adjusted TxPowers, send to NIC. * This is based *only* on current temperature, * ignoring any previous power measurements */ iwl_hw_reg_comp_txpower_temp(priv); reschedule: queue_delayed_work(priv->workqueue, &priv->thermal_periodic, REG_RECALIB_PERIOD * HZ); } void iwl3945_bg_reg_txpower_periodic(struct work_struct *work) { struct iwl_priv *priv = container_of(work, struct iwl_priv, thermal_periodic.work); if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; mutex_lock(&priv->mutex); iwl3945_reg_txpower_periodic(priv); mutex_unlock(&priv->mutex); } /** * iwl_hw_reg_get_ch_grp_index - find the channel-group index (0-4) * for the channel. * * This function is used when initializing channel-info structs. * * NOTE: These channel groups do *NOT* match the bands above! * These channel groups are based on factory-tested channels; * on A-band, EEPROM's "group frequency" entries represent the top * channel in each group 1-4. Group 5 All B/G channels are in group 0. */ static u16 iwl_hw_reg_get_ch_grp_index(struct iwl_priv *priv, const struct iwl_channel_info *ch_info) { struct iwl_eeprom_txpower_group *ch_grp = &priv->eeprom.groups[0]; u8 group; u16 group_index = 0; /* based on factory calib frequencies */ u8 grp_channel; /* Find the group index for the channel ... don't use index 1(?) */ if (is_channel_a_band(ch_info)) { for (group = 1; group < 5; group++) { grp_channel = ch_grp[group].group_channel; if (ch_info->channel <= grp_channel) { group_index = group; break; } } /* group 4 has a few channels *above* its factory cal freq */ if (group == 5) group_index = 4; } else group_index = 0; /* 2.4 GHz, group 0 */ IWL_DEBUG_POWER("Chnl %d mapped to grp %d\n", ch_info->channel, group_index); return group_index; } /** * iwl_hw_reg_get_matched_power_index - Interpolate to get nominal index * * Interpolate to get nominal (i.e. at factory calibration temperature) index * into radio/DSP gain settings table for requested power. */ static int iwl_hw_reg_get_matched_power_index(struct iwl_priv *priv, s8 requested_power, s32 setting_index, s32 *new_index) { const struct iwl_eeprom_txpower_group *chnl_grp = NULL; s32 index0, index1; s32 power = 2 * requested_power; s32 i; const struct iwl_eeprom_txpower_sample *samples; s32 gains0, gains1; s32 res; s32 denominator; chnl_grp = &priv->eeprom.groups[setting_index]; samples = chnl_grp->samples; for (i = 0; i < 5; i++) { if (power == samples[i].power) { *new_index = samples[i].gain_index; return 0; } } if (power > samples[1].power) { index0 = 0; index1 = 1; } else if (power > samples[2].power) { index0 = 1; index1 = 2; } else if (power > samples[3].power) { index0 = 2; index1 = 3; } else { index0 = 3; index1 = 4; } denominator = (s32) samples[index1].power - (s32) samples[index0].power; if (denominator == 0) return -EINVAL; gains0 = (s32) samples[index0].gain_index * (1 << 19); gains1 = (s32) samples[index1].gain_index * (1 << 19); res = gains0 + (gains1 - gains0) * ((s32) power - (s32) samples[index0].power) / denominator + (1 << 18); *new_index = res >> 19; return 0; } static void iwl_hw_reg_init_channel_groups(struct iwl_priv *priv) { u32 i; s32 rate_index; const struct iwl_eeprom_txpower_group *group; IWL_DEBUG_POWER("Initializing factory calib info from EEPROM\n"); for (i = 0; i < IWL_NUM_TX_CALIB_GROUPS; i++) { s8 *clip_pwrs; /* table of power levels for each rate */ s8 satur_pwr; /* saturation power for each chnl group */ group = &priv->eeprom.groups[i]; /* sanity check on factory saturation power value */ if (group->saturation_power < 40) { IWL_WARNING("Error: saturation power is %d, " "less than minimum expected 40\n", group->saturation_power); return; } /* * Derive requested power levels for each rate, based on * hardware capabilities (saturation power for band). * Basic value is 3dB down from saturation, with further * power reductions for highest 3 data rates. These * backoffs provide headroom for high rate modulation * power peaks, without too much distortion (clipping). */ /* we'll fill in this array with h/w max power levels */ clip_pwrs = (s8 *) priv->clip_groups[i].clip_powers; /* divide factory saturation power by 2 to find -3dB level */ satur_pwr = (s8) (group->saturation_power >> 1); /* fill in channel group's nominal powers for each rate */ for (rate_index = 0; rate_index < IWL_RATE_COUNT; rate_index++, clip_pwrs++) { switch (rate_index) { case IWL_RATE_36M_INDEX_TABLE: if (i == 0) /* B/G */ *clip_pwrs = satur_pwr; else /* A */ *clip_pwrs = satur_pwr - 5; break; case IWL_RATE_48M_INDEX_TABLE: if (i == 0) *clip_pwrs = satur_pwr - 7; else *clip_pwrs = satur_pwr - 10; break; case IWL_RATE_54M_INDEX_TABLE: if (i == 0) *clip_pwrs = satur_pwr - 9; else *clip_pwrs = satur_pwr - 12; break; default: *clip_pwrs = satur_pwr; break; } } } } /** * iwl3945_txpower_set_from_eeprom - Set channel power info based on EEPROM * * Second pass (during init) to set up priv->channel_info * * Set up Tx-power settings in our channel info database for each VALID * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values * and current temperature. * * Since this is based on current temperature (at init time), these values may * not be valid for very long, but it gives us a starting/default point, * and allows us to active (i.e. using Tx) scan. * * This does *not* write values to NIC, just sets up our internal table. */ int iwl3945_txpower_set_from_eeprom(struct iwl_priv *priv) { struct iwl_channel_info *ch_info = NULL; struct iwl_channel_power_info *pwr_info; int delta_index; u8 rate_index; u8 scan_tbl_index; const s8 *clip_pwrs; /* array of power levels for each rate */ u8 gain, dsp_atten; s8 power; u8 pwr_index, base_pwr_index, a_band; u8 i; int temperature; /* save temperature reference, * so we can determine next time to calibrate */ temperature = iwl_hw_reg_txpower_get_temperature(priv); priv->last_temperature = temperature; iwl_hw_reg_init_channel_groups(priv); /* initialize Tx power info for each and every channel, 2.4 and 5.x */ for (i = 0, ch_info = priv->channel_info; i < priv->channel_count; i++, ch_info++) { a_band = is_channel_a_band(ch_info); if (!is_channel_valid(ch_info)) continue; /* find this channel's channel group (*not* "band") index */ ch_info->group_index = iwl_hw_reg_get_ch_grp_index(priv, ch_info); /* Get this chnlgrp's rate->max/clip-powers table */ clip_pwrs = priv->clip_groups[ch_info->group_index].clip_powers; /* calculate power index *adjustment* value according to * diff between current temperature and factory temperature */ delta_index = iwl_hw_reg_adjust_power_by_temp(temperature, priv->eeprom.groups[ch_info->group_index]. temperature); IWL_DEBUG_POWER("Delta index for channel %d: %d [%d]\n", ch_info->channel, delta_index, temperature + IWL_TEMP_CONVERT); /* set tx power value for all OFDM rates */ for (rate_index = 0; rate_index < IWL_OFDM_RATES; rate_index++) { s32 power_idx; int rc; /* use channel group's clip-power table, * but don't exceed channel's max power */ s8 pwr = min(ch_info->max_power_avg, clip_pwrs[rate_index]); pwr_info = &ch_info->power_info[rate_index]; /* get base (i.e. at factory-measured temperature) * power table index for this rate's power */ rc = iwl_hw_reg_get_matched_power_index(priv, pwr, ch_info->group_index, &power_idx); if (rc) { IWL_ERROR("Invalid power index\n"); return rc; } pwr_info->base_power_index = (u8) power_idx; /* temperature compensate */ power_idx += delta_index; /* stay within range of gain table */ power_idx = iwl_hw_reg_fix_power_index(power_idx); /* fill 1 OFDM rate's iwl_channel_power_info struct */ pwr_info->requested_power = pwr; pwr_info->power_table_index = (u8) power_idx; pwr_info->tpc.tx_gain = power_gain_table[a_band][power_idx].tx_gain; pwr_info->tpc.dsp_atten = power_gain_table[a_band][power_idx].dsp_atten; } /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/ pwr_info = &ch_info->power_info[IWL_RATE_12M_INDEX_TABLE]; power = pwr_info->requested_power + IWL_CCK_FROM_OFDM_POWER_DIFF; pwr_index = pwr_info->power_table_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; base_pwr_index = pwr_info->base_power_index + IWL_CCK_FROM_OFDM_INDEX_DIFF; /* stay within table range */ pwr_index = iwl_hw_reg_fix_power_index(pwr_index); gain = power_gain_table[a_band][pwr_index].tx_gain; dsp_atten = power_gain_table[a_band][pwr_index].dsp_atten; /* fill each CCK rate's iwl_channel_power_info structure * NOTE: All CCK-rate Txpwrs are the same for a given chnl! * NOTE: CCK rates start at end of OFDM rates! */ for (rate_index = 0; rate_index < IWL_CCK_RATES; rate_index++) { pwr_info = &ch_info->power_info[rate_index+IWL_OFDM_RATES]; pwr_info->requested_power = power; pwr_info->power_table_index = pwr_index; pwr_info->base_power_index = base_pwr_index; pwr_info->tpc.tx_gain = gain; pwr_info->tpc.dsp_atten = dsp_atten; } /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */ for (scan_tbl_index = 0; scan_tbl_index < IWL_NUM_SCAN_RATES; scan_tbl_index++) { s32 actual_index = (scan_tbl_index == 0) ? IWL_RATE_1M_INDEX_TABLE : IWL_RATE_6M_INDEX_TABLE; iwl_hw_reg_set_scan_power(priv, scan_tbl_index, actual_index, clip_pwrs, ch_info, a_band); } } return 0; } int iwl_hw_rxq_stop(struct iwl_priv *priv) { int rc; unsigned long flags; spin_lock_irqsave(&priv->lock, flags); rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } iwl_write_restricted(priv, FH_RCSR_CONFIG(0), 0); rc = iwl_poll_restricted_bit(priv, FH_RSSR_STATUS, (1 << 24), 1000); if (rc < 0) IWL_ERROR("Can't stop Rx DMA.\n"); iwl_release_restricted_access(priv); spin_unlock_irqrestore(&priv->lock, flags); return 0; } int iwl_hw_tx_queue_init(struct iwl_priv *priv, struct iwl_tx_queue *txq) { int rc; unsigned long flags; int txq_id = txq->q.id; struct iwl_shared *shared_data = priv->hw_setting.shared_virt; shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr); spin_lock_irqsave(&priv->lock, flags); rc = iwl_grab_restricted_access(priv); if (rc) { spin_unlock_irqrestore(&priv->lock, flags); return rc; } iwl_write_restricted(priv, FH_CBCC_CTRL(txq_id), 0); iwl_write_restricted(priv, FH_CBCC_BASE(txq_id), 0); iwl_write_restricted(priv, FH_TCSR_CONFIG(txq_id), ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT | ALM_FH_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF | ALM_FH_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD | ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL | ALM_FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE); iwl_release_restricted_access(priv); /* fake read to flush all prev. writes */ iwl_read32(priv, FH_TSSR_CBB_BASE); spin_unlock_irqrestore(&priv->lock, flags); return 0; } int iwl_hw_get_rx_read(struct iwl_priv *priv) { struct iwl_shared *shared_data = priv->hw_setting.shared_virt; return le32_to_cpu(shared_data->rx_read_ptr[0]); } /** * iwl3945_init_hw_rate_table - Initialize the hardware rate fallback table */ int iwl3945_init_hw_rate_table(struct iwl_priv *priv) { int rc, i, index, prev_index; struct iwl_rate_scaling_cmd rate_cmd = { .reserved = {0, 0, 0}, }; struct iwl_rate_scaling_info *table = rate_cmd.table; for (i = 0; i < ARRAY_SIZE(iwl_rates); i++) { index = iwl_rates[i].table_rs_index; table[index].rate_n_flags = iwl_hw_set_rate_n_flags(iwl_rates[i].plcp, 0); table[index].try_cnt = priv->retry_rate; prev_index = iwl_get_prev_ieee_rate(i); table[index].next_rate_index = iwl_rates[prev_index].table_rs_index; } switch (priv->phymode) { case MODE_IEEE80211A: IWL_DEBUG_RATE("Select A mode rate scale\n"); /* If one of the following CCK rates is used, * have it fall back to the 6M OFDM rate */ for (i = IWL_RATE_1M_INDEX_TABLE; i <= IWL_RATE_11M_INDEX_TABLE; i++) table[i].next_rate_index = iwl_rates[IWL_FIRST_OFDM_RATE].table_rs_index; /* Don't fall back to CCK rates */ table[IWL_RATE_12M_INDEX_TABLE].next_rate_index = IWL_RATE_9M_INDEX_TABLE; /* Don't drop out of OFDM rates */ table[IWL_RATE_6M_INDEX_TABLE].next_rate_index = iwl_rates[IWL_FIRST_OFDM_RATE].table_rs_index; break; case MODE_IEEE80211B: IWL_DEBUG_RATE("Select B mode rate scale\n"); /* If an OFDM rate is used, have it fall back to the * 1M CCK rates */ for (i = IWL_RATE_6M_INDEX_TABLE; i <= IWL_RATE_54M_INDEX_TABLE; i++) table[i].next_rate_index = iwl_rates[IWL_FIRST_CCK_RATE].table_rs_index; /* CCK shouldn't fall back to OFDM... */ table[IWL_RATE_11M_INDEX_TABLE].next_rate_index = IWL_RATE_5M_INDEX_TABLE; break; default: IWL_DEBUG_RATE("Select G mode rate scale\n"); break; } /* Update the rate scaling for control frame Tx */ rate_cmd.table_id = 0; rc = iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); if (rc) return rc; /* Update the rate scaling for data frame Tx */ rate_cmd.table_id = 1; return iwl_send_cmd_pdu(priv, REPLY_RATE_SCALE, sizeof(rate_cmd), &rate_cmd); } int iwl_hw_set_hw_setting(struct iwl_priv *priv) { memset((void *)&priv->hw_setting, 0, sizeof(struct iwl_driver_hw_info)); priv->hw_setting.shared_virt = pci_alloc_consistent(priv->pci_dev, sizeof(struct iwl_shared), &priv->hw_setting.shared_phys); if (!priv->hw_setting.shared_virt) { IWL_ERROR("failed to allocate pci memory\n"); mutex_unlock(&priv->mutex); return -ENOMEM; } priv->hw_setting.ac_queue_count = AC_NUM; priv->hw_setting.rx_buffer_size = IWL_RX_BUF_SIZE; priv->hw_setting.tx_cmd_len = sizeof(struct iwl_tx_cmd); priv->hw_setting.max_rxq_size = RX_QUEUE_SIZE; priv->hw_setting.max_rxq_log = RX_QUEUE_SIZE_LOG; priv->hw_setting.max_stations = IWL3945_STATION_COUNT; priv->hw_setting.bcast_sta_id = IWL3945_BROADCAST_ID; return 0; } unsigned int iwl_hw_get_beacon_cmd(struct iwl_priv *priv, struct iwl_frame *frame, u8 rate) { struct iwl_tx_beacon_cmd *tx_beacon_cmd; unsigned int frame_size; tx_beacon_cmd = (struct iwl_tx_beacon_cmd *)&frame->u; memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd)); tx_beacon_cmd->tx.sta_id = IWL3945_BROADCAST_ID; tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; frame_size = iwl_fill_beacon_frame(priv, tx_beacon_cmd->frame, BROADCAST_ADDR, sizeof(frame->u) - sizeof(*tx_beacon_cmd)); BUG_ON(frame_size > MAX_MPDU_SIZE); tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size); tx_beacon_cmd->tx.rate = rate; tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK); /* supp_rates[0] == OFDM start at IWL_FIRST_OFDM_RATE*/ tx_beacon_cmd->tx.supp_rates[0] = (IWL_OFDM_BASIC_RATES_MASK >> IWL_FIRST_OFDM_RATE) & 0xFF; tx_beacon_cmd->tx.supp_rates[1] = (IWL_CCK_BASIC_RATES_MASK & 0xF); return (sizeof(struct iwl_tx_beacon_cmd) + frame_size); } void iwl_hw_rx_handler_setup(struct iwl_priv *priv) { priv->rx_handlers[REPLY_3945_RX] = iwl3945_rx_reply_rx; } void iwl_hw_setup_deferred_work(struct iwl_priv *priv) { INIT_DELAYED_WORK(&priv->thermal_periodic, iwl3945_bg_reg_txpower_periodic); } void iwl_hw_cancel_deferred_work(struct iwl_priv *priv) { cancel_delayed_work(&priv->thermal_periodic); } struct pci_device_id iwl_hw_card_ids[] = { {PCI_DEVICE(0x8086, 0x4222)}, {PCI_DEVICE(0x8086, 0x4227)}, {0} }; inline int iwl_eeprom_acquire_semaphore(struct iwl_priv *priv) { _iwl_clear_bit(priv, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK); return 0; } MODULE_DEVICE_TABLE(pci, iwl_hw_card_ids);