/* * CCW device PGID and path verification I/O handling. * * Copyright IBM Corp. 2002,2009 * Author(s): Cornelia Huck * Martin Schwidefsky * Peter Oberparleiter */ #include #include #include #include #include #include #include #include "cio.h" #include "cio_debug.h" #include "device.h" #include "io_sch.h" #define PGID_RETRIES 5 #define PGID_TIMEOUT (10 * HZ) /* * Process path verification data and report result. */ static void verify_done(struct ccw_device *cdev, int rc) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_dev_id *id = &cdev->private->dev_id; int mpath = cdev->private->flags.mpath; int pgroup = cdev->private->flags.pgroup; if (rc) goto out; /* Ensure consistent multipathing state at device and channel. */ if (sch->config.mp != mpath) { sch->config.mp = mpath; rc = cio_commit_config(sch); } out: CIO_MSG_EVENT(2, "vrfy: device 0.%x.%04x: rc=%d pgroup=%d mpath=%d " "vpm=%02x\n", id->ssid, id->devno, rc, pgroup, mpath, sch->vpm); ccw_device_verify_done(cdev, rc); } /* * Create channel program to perform a NOOP. */ static void nop_build_cp(struct ccw_device *cdev) { struct ccw_request *req = &cdev->private->req; struct ccw1 *cp = cdev->private->iccws; cp->cmd_code = CCW_CMD_NOOP; cp->cda = 0; cp->count = 0; cp->flags = CCW_FLAG_SLI; req->cp = cp; } /* * Perform NOOP on a single path. */ static void nop_do(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; /* Adjust lpm. */ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & sch->opm); if (!req->lpm) goto out_nopath; nop_build_cp(cdev); ccw_request_start(cdev); return; out_nopath: verify_done(cdev, sch->vpm ? 0 : -EACCES); } /* * Adjust NOOP I/O status. */ static enum io_status nop_filter(struct ccw_device *cdev, void *data, struct irb *irb, enum io_status status) { /* Only subchannel status might indicate a path error. */ if (status == IO_STATUS_ERROR && irb->scsw.cmd.cstat == 0) return IO_DONE; return status; } /* * Process NOOP request result for a single path. */ static void nop_callback(struct ccw_device *cdev, void *data, int rc) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; if (rc == 0) sch->vpm |= req->lpm; else if (rc != -EACCES) goto err; req->lpm >>= 1; nop_do(cdev); return; err: verify_done(cdev, rc); } /* * Create channel program to perform SET PGID on a single path. */ static void spid_build_cp(struct ccw_device *cdev, u8 fn) { struct ccw_request *req = &cdev->private->req; struct ccw1 *cp = cdev->private->iccws; int i = 8 - ffs(req->lpm); struct pgid *pgid = &cdev->private->pgid[i]; pgid->inf.fc = fn; cp->cmd_code = CCW_CMD_SET_PGID; cp->cda = (u32) (addr_t) pgid; cp->count = sizeof(*pgid); cp->flags = CCW_FLAG_SLI; req->cp = cp; } /* * Perform establish/resign SET PGID on a single path. */ static void spid_do(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; u8 fn; /* Use next available path that is not already in correct state. */ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam & ~sch->vpm); if (!req->lpm) goto out_nopath; /* Channel program setup. */ if (req->lpm & sch->opm) fn = SPID_FUNC_ESTABLISH; else fn = SPID_FUNC_RESIGN; if (cdev->private->flags.mpath) fn |= SPID_FUNC_MULTI_PATH; spid_build_cp(cdev, fn); ccw_request_start(cdev); return; out_nopath: verify_done(cdev, sch->vpm ? 0 : -EACCES); } static void verify_start(struct ccw_device *cdev); /* * Process SET PGID request result for a single path. */ static void spid_callback(struct ccw_device *cdev, void *data, int rc) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; switch (rc) { case 0: sch->vpm |= req->lpm & sch->opm; break; case -EACCES: break; case -EOPNOTSUPP: if (cdev->private->flags.mpath) { /* Try without multipathing. */ cdev->private->flags.mpath = 0; goto out_restart; } /* Try without pathgrouping. */ cdev->private->flags.pgroup = 0; goto out_restart; default: goto err; } req->lpm >>= 1; spid_do(cdev); return; out_restart: verify_start(cdev); return; err: verify_done(cdev, rc); } static void spid_start(struct ccw_device *cdev) { struct ccw_request *req = &cdev->private->req; /* Initialize request data. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = 0x80; req->callback = spid_callback; spid_do(cdev); } static int pgid_cmp(struct pgid *p1, struct pgid *p2) { return memcmp((char *) p1 + 1, (char *) p2 + 1, sizeof(struct pgid) - 1); } /* * Determine pathgroup state from PGID data. */ static void pgid_analyze(struct ccw_device *cdev, struct pgid **p, int *mismatch, int *reserved, int *reset) { struct pgid *pgid = &cdev->private->pgid[0]; struct pgid *first = NULL; int lpm; int i; *mismatch = 0; *reserved = 0; *reset = 0; for (i = 0, lpm = 0x80; i < 8; i++, pgid++, lpm >>= 1) { if ((cdev->private->pgid_valid_mask & lpm) == 0) continue; if (pgid->inf.ps.state2 == SNID_STATE2_RESVD_ELSE) *reserved = 1; if (pgid->inf.ps.state1 == SNID_STATE1_RESET) { /* A PGID was reset. */ *reset = 1; continue; } if (!first) { first = pgid; continue; } if (pgid_cmp(pgid, first) != 0) *mismatch = 1; } if (!first) first = &channel_subsystems[0]->global_pgid; *p = first; } static u8 pgid_to_vpm(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct pgid *pgid; int i; int lpm; u8 vpm = 0; /* Set VPM bits for paths which are already in the target state. */ for (i = 0; i < 8; i++) { lpm = 0x80 >> i; if ((cdev->private->pgid_valid_mask & lpm) == 0) continue; pgid = &cdev->private->pgid[i]; if (sch->opm & lpm) { if (pgid->inf.ps.state1 != SNID_STATE1_GROUPED) continue; } else { if (pgid->inf.ps.state1 != SNID_STATE1_UNGROUPED) continue; } if (cdev->private->flags.mpath) { if (pgid->inf.ps.state3 != SNID_STATE3_MULTI_PATH) continue; } else { if (pgid->inf.ps.state3 != SNID_STATE3_SINGLE_PATH) continue; } vpm |= lpm; } return vpm; } static void pgid_fill(struct ccw_device *cdev, struct pgid *pgid) { int i; for (i = 0; i < 8; i++) memcpy(&cdev->private->pgid[i], pgid, sizeof(struct pgid)); } /* * Process SENSE PGID data and report result. */ static void snid_done(struct ccw_device *cdev, int rc) { struct ccw_dev_id *id = &cdev->private->dev_id; struct subchannel *sch = to_subchannel(cdev->dev.parent); struct pgid *pgid; int mismatch = 0; int reserved = 0; int reset = 0; if (rc) goto out; pgid_analyze(cdev, &pgid, &mismatch, &reserved, &reset); if (reserved) rc = -EUSERS; else if (mismatch) rc = -EOPNOTSUPP; else { sch->vpm = pgid_to_vpm(cdev); pgid_fill(cdev, pgid); } out: CIO_MSG_EVENT(2, "snid: device 0.%x.%04x: rc=%d pvm=%02x vpm=%02x " "mism=%d rsvd=%d reset=%d\n", id->ssid, id->devno, rc, cdev->private->pgid_valid_mask, sch->vpm, mismatch, reserved, reset); switch (rc) { case 0: /* Anything left to do? */ if (sch->vpm == sch->schib.pmcw.pam) { verify_done(cdev, sch->vpm == 0 ? -EACCES : 0); return; } /* Perform path-grouping. */ spid_start(cdev); break; case -EOPNOTSUPP: /* Path-grouping not supported. */ cdev->private->flags.pgroup = 0; cdev->private->flags.mpath = 0; verify_start(cdev); break; default: verify_done(cdev, rc); } } /* * Create channel program to perform a SENSE PGID on a single path. */ static void snid_build_cp(struct ccw_device *cdev) { struct ccw_request *req = &cdev->private->req; struct ccw1 *cp = cdev->private->iccws; int i = 8 - ffs(req->lpm); /* Channel program setup. */ cp->cmd_code = CCW_CMD_SENSE_PGID; cp->cda = (u32) (addr_t) &cdev->private->pgid[i]; cp->count = sizeof(struct pgid); cp->flags = CCW_FLAG_SLI; req->cp = cp; } /* * Perform SENSE PGID on a single path. */ static void snid_do(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; /* Adjust lpm if paths are not set in pam. */ req->lpm = lpm_adjust(req->lpm, sch->schib.pmcw.pam); if (!req->lpm) goto out_nopath; snid_build_cp(cdev); ccw_request_start(cdev); return; out_nopath: snid_done(cdev, cdev->private->pgid_valid_mask ? 0 : -EACCES); } /* * Process SENSE PGID request result for single path. */ static void snid_callback(struct ccw_device *cdev, void *data, int rc) { struct ccw_request *req = &cdev->private->req; if (rc == 0) cdev->private->pgid_valid_mask |= req->lpm; else if (rc != -EACCES) goto err; req->lpm >>= 1; snid_do(cdev); return; err: snid_done(cdev, rc); } /* * Perform path verification. */ static void verify_start(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; struct ccw_dev_id *devid = &cdev->private->dev_id; sch->vpm = 0; /* Initialize request data. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = 0x80; if (cdev->private->flags.pgroup) { CIO_TRACE_EVENT(4, "snid"); CIO_HEX_EVENT(4, devid, sizeof(*devid)); req->callback = snid_callback; snid_do(cdev); } else { CIO_TRACE_EVENT(4, "nop"); CIO_HEX_EVENT(4, devid, sizeof(*devid)); req->filter = nop_filter; req->callback = nop_callback; nop_do(cdev); } } /** * ccw_device_verify_start - perform path verification * @cdev: ccw device * * Perform an I/O on each available channel path to @cdev to determine which * paths are operational. The resulting path mask is stored in sch->vpm. * If device options specify pathgrouping, establish a pathgroup for the * operational paths. When finished, call ccw_device_verify_done with a * return code specifying the result. */ void ccw_device_verify_start(struct ccw_device *cdev) { CIO_TRACE_EVENT(4, "vrfy"); CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id)); /* Initialize PGID data. */ memset(cdev->private->pgid, 0, sizeof(cdev->private->pgid)); cdev->private->pgid_valid_mask = 0; /* * Initialize pathgroup and multipath state with target values. * They may change in the course of path verification. */ cdev->private->flags.pgroup = cdev->private->options.pgroup; cdev->private->flags.mpath = cdev->private->options.mpath; cdev->private->flags.doverify = 0; verify_start(cdev); } /* * Process disband SET PGID request result. */ static void disband_callback(struct ccw_device *cdev, void *data, int rc) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_dev_id *id = &cdev->private->dev_id; if (rc) goto out; /* Ensure consistent multipathing state at device and channel. */ cdev->private->flags.mpath = 0; if (sch->config.mp) { sch->config.mp = 0; rc = cio_commit_config(sch); } out: CIO_MSG_EVENT(0, "disb: device 0.%x.%04x: rc=%d\n", id->ssid, id->devno, rc); ccw_device_disband_done(cdev, rc); } /** * ccw_device_disband_start - disband pathgroup * @cdev: ccw device * * Execute a SET PGID channel program on @cdev to disband a previously * established pathgroup. When finished, call ccw_device_disband_done with * a return code specifying the result. */ void ccw_device_disband_start(struct ccw_device *cdev) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; u8 fn; CIO_TRACE_EVENT(4, "disb"); CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id)); /* Request setup. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = sch->schib.pmcw.pam & sch->opm; req->callback = disband_callback; fn = SPID_FUNC_DISBAND; if (cdev->private->flags.mpath) fn |= SPID_FUNC_MULTI_PATH; spid_build_cp(cdev, fn); ccw_request_start(cdev); } static void stlck_build_cp(struct ccw_device *cdev, void *buf1, void *buf2) { struct ccw_request *req = &cdev->private->req; struct ccw1 *cp = cdev->private->iccws; cp[0].cmd_code = CCW_CMD_STLCK; cp[0].cda = (u32) (addr_t) buf1; cp[0].count = 32; cp[0].flags = CCW_FLAG_CC; cp[1].cmd_code = CCW_CMD_RELEASE; cp[1].cda = (u32) (addr_t) buf2; cp[1].count = 32; cp[1].flags = 0; req->cp = cp; } static void stlck_callback(struct ccw_device *cdev, void *data, int rc) { ccw_device_stlck_done(cdev, data, rc); } /** * ccw_device_stlck_start - perform unconditional release * @cdev: ccw device * @data: data pointer to be passed to ccw_device_stlck_done * @buf1: data pointer used in channel program * @buf2: data pointer used in channel program * * Execute a channel program on @cdev to release an existing PGID reservation. * When finished, call ccw_device_stlck_done with a return code specifying the * result. */ void ccw_device_stlck_start(struct ccw_device *cdev, void *data, void *buf1, void *buf2) { struct subchannel *sch = to_subchannel(cdev->dev.parent); struct ccw_request *req = &cdev->private->req; CIO_TRACE_EVENT(4, "stlck"); CIO_HEX_EVENT(4, &cdev->private->dev_id, sizeof(cdev->private->dev_id)); /* Request setup. */ memset(req, 0, sizeof(*req)); req->timeout = PGID_TIMEOUT; req->maxretries = PGID_RETRIES; req->lpm = sch->schib.pmcw.pam & sch->opm; req->data = data; req->callback = stlck_callback; stlck_build_cp(cdev, buf1, buf2); ccw_request_start(cdev); }