/* * board-omap3pandora.c (Pandora Handheld Console) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA * 02110-1301 USA * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" #define OMAP3_PANDORA_TS_GPIO 94 /* hardware debounce: (value + 1) * 31us */ #define GPIO_DEBOUNCE_TIME 127 static struct gpio_led pandora_gpio_leds[] = { { .name = "pandora::sd1", .default_trigger = "mmc0", .gpio = 128, }, { .name = "pandora::sd2", .default_trigger = "mmc1", .gpio = 129, }, { .name = "pandora::bluetooth", .gpio = 158, }, { .name = "pandora::wifi", .gpio = 159, }, }; static struct gpio_led_platform_data pandora_gpio_led_data = { .leds = pandora_gpio_leds, .num_leds = ARRAY_SIZE(pandora_gpio_leds), }; static struct platform_device pandora_leds_gpio = { .name = "leds-gpio", .id = -1, .dev = { .platform_data = &pandora_gpio_led_data, }, }; #define GPIO_BUTTON(gpio_num, ev_type, ev_code, act_low, descr) \ { \ .gpio = gpio_num, \ .type = ev_type, \ .code = ev_code, \ .active_low = act_low, \ .desc = "btn " descr, \ } #define GPIO_BUTTON_LOW(gpio_num, event_code, description) \ GPIO_BUTTON(gpio_num, EV_KEY, event_code, 1, description) static struct gpio_keys_button pandora_gpio_keys[] = { GPIO_BUTTON_LOW(110, KEY_UP, "up"), GPIO_BUTTON_LOW(103, KEY_DOWN, "down"), GPIO_BUTTON_LOW(96, KEY_LEFT, "left"), GPIO_BUTTON_LOW(98, KEY_RIGHT, "right"), GPIO_BUTTON_LOW(109, KEY_KP1, "game 1"), GPIO_BUTTON_LOW(111, KEY_KP2, "game 2"), GPIO_BUTTON_LOW(106, KEY_KP3, "game 3"), GPIO_BUTTON_LOW(101, KEY_KP4, "game 4"), GPIO_BUTTON_LOW(102, BTN_TL, "l"), GPIO_BUTTON_LOW(97, BTN_TL2, "l2"), GPIO_BUTTON_LOW(105, BTN_TR, "r"), GPIO_BUTTON_LOW(107, BTN_TR2, "r2"), GPIO_BUTTON_LOW(104, KEY_LEFTCTRL, "ctrl"), GPIO_BUTTON_LOW(99, KEY_MENU, "menu"), GPIO_BUTTON_LOW(176, KEY_COFFEE, "hold"), GPIO_BUTTON(100, EV_KEY, KEY_LEFTALT, 0, "alt"), GPIO_BUTTON(108, EV_SW, SW_LID, 1, "lid"), }; static struct gpio_keys_platform_data pandora_gpio_key_info = { .buttons = pandora_gpio_keys, .nbuttons = ARRAY_SIZE(pandora_gpio_keys), }; static struct platform_device pandora_keys_gpio = { .name = "gpio-keys", .id = -1, .dev = { .platform_data = &pandora_gpio_key_info, }, }; static void __init pandora_keys_gpio_init(void) { /* set debounce time for GPIO banks 4 and 6 */ omap_set_gpio_debounce_time(32 * 3, GPIO_DEBOUNCE_TIME); omap_set_gpio_debounce_time(32 * 5, GPIO_DEBOUNCE_TIME); } static int board_keymap[] = { /* row, col, code */ KEY(0, 0, KEY_9), KEY(0, 1, KEY_8), KEY(0, 2, KEY_I), KEY(0, 3, KEY_J), KEY(0, 4, KEY_N), KEY(0, 5, KEY_M), KEY(1, 0, KEY_0), KEY(1, 1, KEY_7), KEY(1, 2, KEY_U), KEY(1, 3, KEY_H), KEY(1, 4, KEY_B), KEY(1, 5, KEY_SPACE), KEY(2, 0, KEY_BACKSPACE), KEY(2, 1, KEY_6), KEY(2, 2, KEY_Y), KEY(2, 3, KEY_G), KEY(2, 4, KEY_V), KEY(2, 5, KEY_FN), KEY(3, 0, KEY_O), KEY(3, 1, KEY_5), KEY(3, 2, KEY_T), KEY(3, 3, KEY_F), KEY(3, 4, KEY_C), KEY(4, 0, KEY_P), KEY(4, 1, KEY_4), KEY(4, 2, KEY_R), KEY(4, 3, KEY_D), KEY(4, 4, KEY_X), KEY(5, 0, KEY_K), KEY(5, 1, KEY_3), KEY(5, 2, KEY_E), KEY(5, 3, KEY_S), KEY(5, 4, KEY_Z), KEY(6, 0, KEY_L), KEY(6, 1, KEY_2), KEY(6, 2, KEY_W), KEY(6, 3, KEY_A), KEY(6, 4, KEY_DOT), KEY(7, 0, KEY_ENTER), KEY(7, 1, KEY_1), KEY(7, 2, KEY_Q), KEY(7, 3, KEY_LEFTSHIFT), KEY(7, 4, KEY_COMMA), }; static struct matrix_keymap_data board_map_data = { .keymap = board_keymap, .keymap_size = ARRAY_SIZE(board_keymap), }; static struct twl4030_keypad_data pandora_kp_data = { .keymap_data = &board_map_data, .rows = 8, .cols = 6, .rep = 1, }; static struct twl4030_hsmmc_info omap3pandora_mmc[] = { { .mmc = 1, .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = 126, .ext_clock = 0, }, { .mmc = 2, .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = 127, .ext_clock = 1, .transceiver = true, }, { .mmc = 3, .wires = 4, .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, {} /* Terminator */ }; static struct regulator_consumer_supply pandora_vmmc1_supply = { .supply = "vmmc", }; static struct regulator_consumer_supply pandora_vmmc2_supply = { .supply = "vmmc", }; static int omap3pandora_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + {0,1} is "mmc{0,1}_cd" (input/IRQ) */ omap3pandora_mmc[0].gpio_cd = gpio + 0; omap3pandora_mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(omap3pandora_mmc); /* link regulators to MMC adapters */ pandora_vmmc1_supply.dev = omap3pandora_mmc[0].dev; pandora_vmmc2_supply.dev = omap3pandora_mmc[1].dev; return 0; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .setup = omap3pandora_twl_gpio_setup, }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data pandora_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, .consumer_supplies = &pandora_vmmc1_supply, }; /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ static struct regulator_init_data pandora_vmmc2 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, .consumer_supplies = &pandora_vmmc2_supply, }; static struct twl4030_usb_data omap3pandora_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; static struct twl4030_codec_audio_data omap3pandora_audio_data = { .audio_mclk = 26000000, }; static struct twl4030_codec_data omap3pandora_codec_data = { .audio_mclk = 26000000, .audio = &omap3pandora_audio_data, }; static struct twl4030_platform_data omap3pandora_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, .usb = &omap3pandora_usb_data, .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, .keypad = &pandora_kp_data, }; static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { { I2C_BOARD_INFO("tps65950", 0x48), .flags = I2C_CLIENT_WAKE, .irq = INT_34XX_SYS_NIRQ, .platform_data = &omap3pandora_twldata, }, }; static int __init omap3pandora_i2c_init(void) { omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, ARRAY_SIZE(omap3pandora_i2c_boardinfo)); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, NULL, 0); return 0; } static void __init omap3pandora_ads7846_init(void) { int gpio = OMAP3_PANDORA_TS_GPIO; int ret; ret = gpio_request(gpio, "ads7846_pen_down"); if (ret < 0) { printk(KERN_ERR "Failed to request GPIO %d for " "ads7846 pen down IRQ\n", gpio); return; } gpio_direction_input(gpio); } static int ads7846_get_pendown_state(void) { return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); } static struct ads7846_platform_data ads7846_config = { .x_max = 0x0fff, .y_max = 0x0fff, .x_plate_ohms = 180, .pressure_max = 255, .debounce_max = 10, .debounce_tol = 3, .debounce_rep = 1, .get_pendown_state = ads7846_get_pendown_state, .keep_vref_on = 1, }; static struct omap2_mcspi_device_config ads7846_mcspi_config = { .turbo_mode = 0, .single_channel = 1, /* 0: slave, 1: master */ }; static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { .modalias = "ads7846", .bus_num = 1, .chip_select = 0, .max_speed_hz = 1500000, .controller_data = &ads7846_mcspi_config, .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), .platform_data = &ads7846_config, } }; static void __init omap3pandora_init_irq(void) { omap2_init_common_hw(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); omap_init_irq(); omap_gpio_init(); } static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, }; static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .port_mode[0] = EHCI_HCD_OMAP_MODE_PHY, .port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN, .port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN, .phy_reset = true, .reset_gpio_port[0] = 16, .reset_gpio_port[1] = -EINVAL, .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else #define board_mux NULL #endif static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap3pandora_ads7846_init(); usb_ehci_init(&ehci_pdata); pandora_keys_gpio_init(); usb_musb_init(); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); } static void __init omap3pandora_map_io(void) { omap2_set_globals_343x(); omap34xx_map_common_io(); } MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .phys_io = 0x48000000, .io_pg_offst = ((0xfa000000) >> 18) & 0xfffc, .boot_params = 0x80000100, .map_io = omap3pandora_map_io, .init_irq = omap3pandora_init_irq, .init_machine = omap3pandora_init, .timer = &omap_timer, MACHINE_END