/*
 * Copyright (c) 2016 Andreas Färber
 *
 * This file is dual-licensed: you can use it either under the terms
 * of the GPL or the X11 license, at your option. Note that this dual
 * licensing only applies to this file, and not this project as a
 * whole.
 *
 *  a) This library is free software; you can redistribute it and/or
 *     modify it under the terms of the GNU General Public License as
 *     published by the Free Software Foundation; either version 2 of the
 *     License, or (at your option) any later version.
 *
 *     This library is distributed in the hope that it will be useful,
 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *     GNU General Public License for more details.
 *
 * Or, alternatively,
 *
 *  b) Permission is hereby granted, free of charge, to any person
 *     obtaining a copy of this software and associated documentation
 *     files (the "Software"), to deal in the Software without
 *     restriction, including without limitation the rights to use,
 *     copy, modify, merge, publish, distribute, sublicense, and/or
 *     sell copies of the Software, and to permit persons to whom the
 *     Software is furnished to do so, subject to the following
 *     conditions:
 *
 *     The above copyright notice and this permission notice shall be
 *     included in all copies or substantial portions of the Software.
 *
 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 *     OTHER DEALINGS IN THE SOFTWARE.
 */

#include "meson-gx.dtsi"
#include <dt-bindings/gpio/meson-gxbb-gpio.h>
#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h>
#include <dt-bindings/clock/gxbb-clkc.h>
#include <dt-bindings/clock/gxbb-aoclkc.h>
#include <dt-bindings/reset/gxbb-aoclkc.h>

/ {
	compatible = "amlogic,meson-gxbb";

	firmware {
		sm: secure-monitor {
			compatible = "amlogic,meson-gxbb-sm";
		};
	};

	efuse: efuse {
		compatible = "amlogic,meson-gxbb-efuse";
		#address-cells = <1>;
		#size-cells = <1>;

		sn: sn@14 {
			reg = <0x14 0x10>;
		};

		eth_mac: eth_mac@34 {
			reg = <0x34 0x10>;
		};

		bid: bid@46 {
			reg = <0x46 0x30>;
		};
	};

	soc {
		usb0_phy: phy@c0000000 {
			compatible = "amlogic,meson-gxbb-usb2-phy";
			#phy-cells = <0>;
			reg = <0x0 0xc0000000 0x0 0x20>;
			resets = <&reset RESET_USB_OTG>;
			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB0>;
			clock-names = "usb_general", "usb";
			status = "disabled";
		};

		usb1_phy: phy@c0000020 {
			compatible = "amlogic,meson-gxbb-usb2-phy";
			#phy-cells = <0>;
			reg = <0x0 0xc0000020 0x0 0x20>;
			clocks = <&clkc CLKID_USB>, <&clkc CLKID_USB1>;
			clock-names = "usb_general", "usb";
			status = "disabled";
		};

		usb0: usb@c9000000 {
			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
			reg = <0x0 0xc9000000 0x0 0x40000>;
			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clkc CLKID_USB0_DDR_BRIDGE>;
			clock-names = "otg";
			phys = <&usb0_phy>;
			phy-names = "usb2-phy";
			dr_mode = "host";
			status = "disabled";
		};

		usb1: usb@c9100000 {
			compatible = "amlogic,meson-gxbb-usb", "snps,dwc2";
			reg = <0x0 0xc9100000 0x0 0x40000>;
			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&clkc CLKID_USB1_DDR_BRIDGE>;
			clock-names = "otg";
			phys = <&usb1_phy>;
			phy-names = "usb2-phy";
			dr_mode = "host";
			status = "disabled";
		};

		ethmac: ethernet@c9410000 {
			compatible = "amlogic,meson-gxbb-dwmac", "snps,dwmac";
			reg = <0x0 0xc9410000 0x0 0x10000
			       0x0 0xc8834540 0x0 0x4>;
			interrupts = <0 8 1>;
			interrupt-names = "macirq";
			clocks = <&clkc CLKID_ETH>,
				 <&clkc CLKID_FCLK_DIV2>,
				 <&clkc CLKID_MPLL2>;
			clock-names = "stmmaceth", "clkin0", "clkin1";
			phy-mode = "rgmii";
			status = "disabled";
		};
	};
};

&cbus {
	reset: reset-controller@4404 {
		compatible = "amlogic,meson-gxbb-reset";
		reg = <0x0 0x04404 0x0 0x20>;
		#reset-cells = <1>;
	};

	uart_B: serial@84dc {
		compatible = "amlogic,meson-uart";
		reg = <0x0 0x84dc 0x0 0x14>;
		interrupts = <GIC_SPI 75 IRQ_TYPE_EDGE_RISING>;
		clocks = <&xtal>;
		status = "disabled";
	};

	pwm_ab: pwm@8550 {
		compatible = "amlogic,meson-gxbb-pwm";
		reg = <0x0 0x08550 0x0 0x10>;
		#pwm-cells = <3>;
		status = "disabled";
	};

	pwm_cd: pwm@8650 {
		compatible = "amlogic,meson-gxbb-pwm";
		reg = <0x0 0x08650 0x0 0x10>;
		#pwm-cells = <3>;
		status = "disabled";
	};

	pwm_ef: pwm@86c0 {
		compatible = "amlogic,meson-gxbb-pwm";
		reg = <0x0 0x086c0 0x0 0x10>;
		#pwm-cells = <3>;
		status = "disabled";
	};

	uart_C: serial@8700 {
		compatible = "amlogic,meson-uart";
		reg = <0x0 0x8700 0x0 0x14>;
		interrupts = <GIC_SPI 93 IRQ_TYPE_EDGE_RISING>;
		clocks = <&xtal>;
		status = "disabled";
	};

	watchdog@98d0 {
		compatible = "amlogic,meson-gxbb-wdt";
		reg = <0x0 0x098d0 0x0 0x10>;
		clocks = <&xtal>;
	};

	spifc: spi@8c80 {
		compatible = "amlogic,meson-gxbb-spifc";
		reg = <0x0 0x08c80 0x0 0x80>;
		#address-cells = <1>;
		#size-cells = <0>;
		clocks = <&clkc CLKID_SPI>;
		status = "disabled";
	};

	i2c_A: i2c@8500 {
		compatible = "amlogic,meson-gxbb-i2c";
		reg = <0x0 0x08500 0x0 0x20>;
		interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
		clocks = <&clkc CLKID_I2C>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c_B: i2c@87c0 {
		compatible = "amlogic,meson-gxbb-i2c";
		reg = <0x0 0x087c0 0x0 0x20>;
		interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
		clocks = <&clkc CLKID_I2C>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};

	i2c_C: i2c@87e0 {
		compatible = "amlogic,meson-gxbb-i2c";
		reg = <0x0 0x087e0 0x0 0x20>;
		interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
		clocks = <&clkc CLKID_I2C>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};

&aobus {
	pinctrl_aobus: pinctrl@14 {
		compatible = "amlogic,meson-gxbb-aobus-pinctrl";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gpio_ao: bank@14 {
			reg = <0x0 0x00014 0x0 0x8>,
			      <0x0 0x0002c 0x0 0x4>,
			      <0x0 0x00024 0x0 0x8>;
			reg-names = "mux", "pull", "gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};

		uart_ao_a_pins: uart_ao_a {
			mux {
				groups = "uart_tx_ao_a", "uart_rx_ao_a";
				function = "uart_ao";
			};
		};

		remote_input_ao_pins: remote_input_ao {
			mux {
				groups = "remote_input_ao";
				function = "remote_input_ao";
			};
		};

		i2c_ao_pins: i2c_ao {
			mux {
				groups = "i2c_sck_ao",
				       "i2c_sda_ao";
				function = "i2c_ao";
			};
		};

		pwm_ao_a_3_pins: pwm_ao_a_3 {
			mux {
				groups = "pwm_ao_a_3";
				function = "pwm_ao_a_3";
			};
		};

		pwm_ao_a_6_pins: pwm_ao_a_6 {
			mux {
				groups = "pwm_ao_a_6";
				function = "pwm_ao_a_6";
			};
		};

		pwm_ao_a_12_pins: pwm_ao_a_12 {
			mux {
				groups = "pwm_ao_a_12";
				function = "pwm_ao_a_12";
			};
		};

		pwm_ao_b_pins: pwm_ao_b {
			mux {
				groups = "pwm_ao_b";
				function = "pwm_ao_b";
			};
		};
	};

	clkc_AO: clock-controller@040 {
		compatible = "amlogic,gxbb-aoclkc";
		reg = <0x0 0x00040 0x0 0x4>;
		#clock-cells = <1>;
		#reset-cells = <1>;
	};

	ir: ir@580 {
		compatible = "amlogic,meson-gxbb-ir";
		reg = <0x0 0x00580 0x0 0x40>;
		interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>;
		status = "disabled";
	};

	pwm_ab_AO: pwm@550 {
		compatible = "amlogic,meson-gxbb-pwm";
		reg = <0x0 0x0550 0x0 0x10>;
		#pwm-cells = <3>;
		status = "disabled";
	};

	i2c_AO: i2c@500 {
		compatible = "amlogic,meson-gxbb-i2c";
		reg = <0x0 0x500 0x0 0x20>;
		interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
		clocks = <&clkc CLKID_AO_I2C>;
		#address-cells = <1>;
		#size-cells = <0>;
		status = "disabled";
	};
};

&periphs {
	rng {
		compatible = "amlogic,meson-rng";
		reg = <0x0 0x0 0x0 0x4>;
	};

	pinctrl_periphs: pinctrl@4b0 {
		compatible = "amlogic,meson-gxbb-periphs-pinctrl";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		gpio: bank@4b0 {
			reg = <0x0 0x004b0 0x0 0x28>,
			      <0x0 0x004e8 0x0 0x14>,
			      <0x0 0x00120 0x0 0x14>,
			      <0x0 0x00430 0x0 0x40>;
			reg-names = "mux", "pull", "pull-enable", "gpio";
			gpio-controller;
			#gpio-cells = <2>;
		};

		emmc_pins: emmc {
			mux {
				groups = "emmc_nand_d07",
				       "emmc_cmd",
				       "emmc_clk";
				function = "emmc";
			};
		};

		nor_pins: nor {
			mux {
				groups = "nor_d",
				       "nor_q",
				       "nor_c",
				       "nor_cs";
				function = "nor";
			};
		};

		sdcard_pins: sdcard {
			mux {
				groups = "sdcard_d0",
				       "sdcard_d1",
				       "sdcard_d2",
				       "sdcard_d3",
				       "sdcard_cmd",
				       "sdcard_clk";
				function = "sdcard";
			};
		};

		sdio_pins: sdio {
			mux {
				groups = "sdio_d0",
				       "sdio_d1",
				       "sdio_d2",
				       "sdio_d3",
				       "sdio_cmd",
				       "sdio_clk";
				function = "sdio";
			};
		};

		sdio_irq_pins: sdio_irq {
			mux {
				groups = "sdio_irq";
				function = "sdio";
			};
		};

		uart_a_pins: uart_a {
			mux {
				groups = "uart_tx_a",
				       "uart_rx_a";
				function = "uart_a";
			};
		};

		uart_b_pins: uart_b {
			mux {
				groups = "uart_tx_b",
				       "uart_rx_b";
				function = "uart_b";
			};
		};

		uart_c_pins: uart_c {
			mux {
				groups = "uart_tx_c",
				       "uart_rx_c";
				function = "uart_c";
			};
		};

		i2c_a_pins: i2c_a {
			mux {
				groups = "i2c_sck_a",
				       "i2c_sda_a";
				function = "i2c_a";
			};
		};

		i2c_b_pins: i2c_b {
			mux {
				groups = "i2c_sck_b",
				       "i2c_sda_b";
				function = "i2c_b";
			};
		};

		i2c_c_pins: i2c_c {
			mux {
				groups = "i2c_sck_c",
				       "i2c_sda_c";
				function = "i2c_c";
			};
		};

		eth_pins: eth_c {
			mux {
				groups = "eth_mdio",
				       "eth_mdc",
				       "eth_clk_rx_clk",
				       "eth_rx_dv",
				       "eth_rxd0",
				       "eth_rxd1",
				       "eth_rxd2",
				       "eth_rxd3",
				       "eth_rgmii_tx_clk",
				       "eth_tx_en",
				       "eth_txd0",
				       "eth_txd1",
				       "eth_txd2",
				       "eth_txd3";
				function = "eth";
			};
		};

		pwm_a_x_pins: pwm_a_x {
			mux {
				groups = "pwm_a_x";
				function = "pwm_a_x";
			};
		};

		pwm_a_y_pins: pwm_a_y {
			mux {
				groups = "pwm_a_y";
				function = "pwm_a_y";
			};
		};

		pwm_b_pins: pwm_b {
			mux {
				groups = "pwm_b";
				function = "pwm_b";
			};
		};

		pwm_d_pins: pwm_d {
			mux {
				groups = "pwm_d";
				function = "pwm_d";
			};
		};

		pwm_e_pins: pwm_e {
			mux {
				groups = "pwm_e";
				function = "pwm_e";
			};
		};

		pwm_f_x_pins: pwm_f_x {
			mux {
				groups = "pwm_f_x";
				function = "pwm_f_x";
			};
		};

		pwm_f_y_pins: pwm_f_y {
			mux {
				groups = "pwm_f_y";
				function = "pwm_f_y";
			};
		};
	};
};

&hiubus {
	clkc: clock-controller@0 {
		compatible = "amlogic,gxbb-clkc";
		#clock-cells = <1>;
		reg = <0x0 0x0 0x0 0x3db>;
	};

	mailbox: mailbox@404 {
		compatible = "amlogic,meson-gxbb-mhu";
		reg = <0 0x404 0 0x4c>;
		interrupts = <0 208 IRQ_TYPE_EDGE_RISING>,
			     <0 209 IRQ_TYPE_EDGE_RISING>,
			     <0 210 IRQ_TYPE_EDGE_RISING>;
		#mbox-cells = <1>;
	};
};