# # PINCTRL infrastructure and drivers # config PINCTRL bool if PINCTRL menu "Pin controllers" depends on PINCTRL config PINMUX bool "Support pin multiplexing controllers" config PINCONF bool "Support pin configuration controllers" config GENERIC_PINCONF bool select PINCONF config DEBUG_PINCTRL bool "Debug PINCTRL calls" depends on DEBUG_KERNEL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. config PINCTRL_ABX500 bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" depends on AB8500_CORE select GENERIC_PINCONF help Select this to enable the ABx500 family IC GPIO driver config PINCTRL_AB8500 bool "AB8500 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 config PINCTRL_AB8540 bool "AB8540 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 config PINCTRL_AB9540 bool "AB9540 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 config PINCTRL_AB8505 bool "AB8505 pin controller driver" depends on PINCTRL_ABX500 && ARCH_U8500 config PINCTRL_ADI2 bool "ADI pin controller driver" depends on BLACKFIN select PINMUX select IRQ_DOMAIN help This is the pin controller and gpio driver for ADI BF54x, BF60x and future processors. This option is selected automatically when specific machine and arch are selected to build. config PINCTRL_AS3722 bool "Pinctrl and GPIO driver for ams AS3722 PMIC" depends on MFD_AS3722 && GPIOLIB select PINMUX select GENERIC_PINCONF help AS3722 device supports the configuration of GPIO pins for different functionality. This driver supports the pinmux, push-pull and open drain configuration for the GPIO pins of AS3722 devices. It also supports the GPIO functionality through gpiolib. config PINCTRL_BF54x def_bool y if BF54x select PINCTRL_ADI2 config PINCTRL_BF60x def_bool y if BF60x select PINCTRL_ADI2 config PINCTRL_AT91 bool "AT91 pinctrl driver" depends on OF depends on ARCH_AT91 select PINMUX select PINCONF select GPIOLIB select OF_GPIO select GPIOLIB_IRQCHIP help Say Y here to enable the at91 pinctrl driver config PINCTRL_BAYTRAIL bool "Intel Baytrail GPIO pin control" depends on GPIOLIB && ACPI && X86 select IRQ_DOMAIN help driver for memory mapped GPIO functionality on Intel Baytrail platforms. Supports 3 banks with 102, 28 and 44 gpios. Most pins are usually muxed to some other functionality by firmware, so only a small amount is available for gpio use. Requires ACPI device enumeration code to set up a platform device. config PINCTRL_BCM2835 bool select PINMUX select PINCONF config PINCTRL_BCM281XX bool "Broadcom BCM281xx pinctrl driver" depends on OF select PINMUX select PINCONF select GENERIC_PINCONF select REGMAP_MMIO help Say Y here to support Broadcom BCM281xx pinctrl driver, which is used for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351, BCM28145, and BCM28155 SoCs. This driver requires the pinctrl framework. GPIO is provided by a separate GPIO driver. config PINCTRL_IMX bool select PINMUX select PINCONF config PINCTRL_IMX1_CORE bool select PINMUX select PINCONF config PINCTRL_IMX27 bool "IMX27 pinctrl driver" depends on SOC_IMX27 select PINCTRL_IMX1_CORE help Say Y here to enable the imx27 pinctrl driver config PINCTRL_IMX25 bool "IMX25 pinctrl driver" depends on OF depends on SOC_IMX25 select PINCTRL_IMX help Say Y here to enable the imx25 pinctrl driver config PINCTRL_IMX35 bool "IMX35 pinctrl driver" depends on SOC_IMX35 select PINCTRL_IMX help Say Y here to enable the imx35 pinctrl driver config PINCTRL_IMX50 bool "IMX50 pinctrl driver" depends on SOC_IMX50 select PINCTRL_IMX help Say Y here to enable the imx50 pinctrl driver config PINCTRL_IMX51 bool "IMX51 pinctrl driver" depends on SOC_IMX51 select PINCTRL_IMX help Say Y here to enable the imx51 pinctrl driver config PINCTRL_IMX53 bool "IMX53 pinctrl driver" depends on SOC_IMX53 select PINCTRL_IMX help Say Y here to enable the imx53 pinctrl driver config PINCTRL_IMX6Q bool "IMX6Q/DL pinctrl driver" depends on SOC_IMX6Q select PINCTRL_IMX help Say Y here to enable the imx6q/dl pinctrl driver config PINCTRL_IMX6SL bool "IMX6SL pinctrl driver" depends on SOC_IMX6SL select PINCTRL_IMX help Say Y here to enable the imx6sl pinctrl driver config PINCTRL_VF610 bool "Freescale Vybrid VF610 pinctrl driver" depends on SOC_VF610 select PINCTRL_IMX help Say Y here to enable the Freescale Vybrid VF610 pinctrl driver config PINCTRL_LANTIQ bool depends on LANTIQ select PINMUX select PINCONF config PINCTRL_FALCON bool depends on SOC_FALCON depends on PINCTRL_LANTIQ config PINCTRL_MXS bool select PINMUX select PINCONF config PINCTRL_IMX23 bool select PINCTRL_MXS config PINCTRL_IMX28 bool select PINCTRL_MXS config PINCTRL_MSM bool select PINMUX select PINCONF select GENERIC_PINCONF config PINCTRL_APQ8064 tristate "Qualcomm APQ8064 pin controller driver" depends on GPIOLIB && OF select PINCTRL_MSM help This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm APQ8064 platform. config PINCTRL_IPQ8064 tristate "Qualcomm IPQ8064 pin controller driver" depends on GPIOLIB && OF select PINCTRL_MSM help This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm IPQ8064 platform. config PINCTRL_MSM8X74 tristate "Qualcomm 8x74 pin controller driver" depends on GPIOLIB && OF && (ARCH_QCOM || COMPILE_TEST) select PINCTRL_MSM help This is the pinctrl, pinmux, pinconf and gpiolib driver for the Qualcomm TLMM block found in the Qualcomm 8974 platform. config PINCTRL_NOMADIK bool "Nomadik pin controller driver" depends on ARCH_U8500 || ARCH_NOMADIK select PINMUX select PINCONF select GPIOLIB select OF_GPIO select GPIOLIB_IRQCHIP config PINCTRL_STN8815 bool "STN8815 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_NOMADIK config PINCTRL_DB8500 bool "DB8500 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_U8500 config PINCTRL_DB8540 bool "DB8540 pin controller driver" depends on PINCTRL_NOMADIK && ARCH_U8500 config PINCTRL_ROCKCHIP bool select PINMUX select GENERIC_PINCONF select GENERIC_IRQ_CHIP config PINCTRL_SINGLE tristate "One-register-per-pin type device tree based pinctrl driver" depends on OF select PINMUX select PINCONF select GENERIC_PINCONF help This selects the device tree based generic pinctrl driver. config PINCTRL_SIRF bool "CSR SiRFprimaII/SiRFmarco pin controller driver" depends on ARCH_SIRF select PINMUX config PINCTRL_SUNXI bool select PINMUX select GENERIC_PINCONF config PINCTRL_ST bool depends on OF select PINMUX select PINCONF select GPIOLIB_IRQCHIP config PINCTRL_TEGRA bool select PINMUX select PINCONF config PINCTRL_TEGRA20 bool select PINCTRL_TEGRA config PINCTRL_TEGRA30 bool select PINCTRL_TEGRA config PINCTRL_TEGRA114 bool select PINCTRL_TEGRA config PINCTRL_TEGRA124 bool select PINCTRL_TEGRA config PINCTRL_TZ1090 bool "Toumaz Xenif TZ1090 pin control driver" depends on SOC_TZ1090 select PINMUX select GENERIC_PINCONF config PINCTRL_TZ1090_PDC bool "Toumaz Xenif TZ1090 PDC pin control driver" depends on SOC_TZ1090 select PINMUX select PINCONF config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 select PINMUX select GENERIC_PINCONF config PINCTRL_COH901 bool "ST-Ericsson U300 COH 901 335/571 GPIO" depends on GPIOLIB && ARCH_U300 && PINCTRL_U300 select GPIOLIB_IRQCHIP help Say yes here to support GPIO interface on ST-Ericsson U300. The names of the two IP block variants supported are COH 901 335 and COH 901 571/3. They contain 3, 5 or 7 ports of 8 GPIO pins each. config PINCTRL_SAMSUNG bool select PINMUX select PINCONF config PINCTRL_EXYNOS bool "Pinctrl driver data for Samsung EXYNOS SoCs other than 5440" depends on OF && GPIOLIB && (ARCH_EXYNOS || ARCH_S5PV210) select PINCTRL_SAMSUNG config PINCTRL_EXYNOS5440 bool "Samsung EXYNOS5440 SoC pinctrl driver" depends on SOC_EXYNOS5440 select PINMUX select PINCONF config PINCTRL_PALMAS bool "Pinctrl driver for the PALMAS Series MFD devices" depends on OF && MFD_PALMAS select PINMUX select GENERIC_PINCONF help Palmas device supports the configuration of pins for different functionality. This driver supports the pinmux, push-pull and open drain configuration for the Palmas series devices like TPS65913, TPS80036 etc. config PINCTRL_S3C24XX bool "Samsung S3C24XX SoC pinctrl driver" depends on ARCH_S3C24XX select PINCTRL_SAMSUNG config PINCTRL_S3C64XX bool "Samsung S3C64XX SoC pinctrl driver" depends on ARCH_S3C64XX select PINCTRL_SAMSUNG source "drivers/pinctrl/mvebu/Kconfig" source "drivers/pinctrl/sh-pfc/Kconfig" source "drivers/pinctrl/spear/Kconfig" source "drivers/pinctrl/vt8500/Kconfig" config PINCTRL_XWAY bool depends on SOC_TYPE_XWAY depends on PINCTRL_LANTIQ config PINCTRL_TB10X bool depends on ARC_PLAT_TB10X endmenu endif