/* * drivers/pci/bus.c * * From setup-res.c, by: * Dave Rusling (david.rusling@reo.mts.dec.com) * David Mosberger (davidm@cs.arizona.edu) * David Miller (davem@redhat.com) * Ivan Kokshaysky (ink@jurassic.park.msu.ru) */ #include #include #include #include #include #include #include #include #include "pci.h" void pci_add_resource_offset(struct list_head *resources, struct resource *res, resource_size_t offset) { struct pci_host_bridge_window *window; window = kzalloc(sizeof(struct pci_host_bridge_window), GFP_KERNEL); if (!window) { printk(KERN_ERR "PCI: can't add host bridge window %pR\n", res); return; } window->res = res; window->offset = offset; list_add_tail(&window->list, resources); } EXPORT_SYMBOL(pci_add_resource_offset); void pci_add_resource(struct list_head *resources, struct resource *res) { pci_add_resource_offset(resources, res, 0); } EXPORT_SYMBOL(pci_add_resource); void pci_free_resource_list(struct list_head *resources) { struct pci_host_bridge_window *window, *tmp; list_for_each_entry_safe(window, tmp, resources, list) { list_del(&window->list); kfree(window); } } EXPORT_SYMBOL(pci_free_resource_list); void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags) { struct pci_bus_resource *bus_res; bus_res = kzalloc(sizeof(struct pci_bus_resource), GFP_KERNEL); if (!bus_res) { dev_err(&bus->dev, "can't add %pR resource\n", res); return; } bus_res->res = res; bus_res->flags = flags; list_add_tail(&bus_res->list, &bus->resources); } struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n) { struct pci_bus_resource *bus_res; if (n < PCI_BRIDGE_RESOURCE_NUM) return bus->resource[n]; n -= PCI_BRIDGE_RESOURCE_NUM; list_for_each_entry(bus_res, &bus->resources, list) { if (n-- == 0) return bus_res->res; } return NULL; } EXPORT_SYMBOL_GPL(pci_bus_resource_n); void pci_bus_remove_resources(struct pci_bus *bus) { int i; struct pci_bus_resource *bus_res, *tmp; for (i = 0; i < PCI_BRIDGE_RESOURCE_NUM; i++) bus->resource[i] = NULL; list_for_each_entry_safe(bus_res, tmp, &bus->resources, list) { list_del(&bus_res->list); kfree(bus_res); } } static struct pci_bus_region pci_32_bit = {0, 0xffffffffULL}; #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT static struct pci_bus_region pci_64_bit = {0, (dma_addr_t) 0xffffffffffffffffULL}; static struct pci_bus_region pci_high = {(dma_addr_t) 0x100000000ULL, (dma_addr_t) 0xffffffffffffffffULL}; #endif /* * @res contains CPU addresses. Clip it so the corresponding bus addresses * on @bus are entirely within @region. This is used to control the bus * addresses of resources we allocate, e.g., we may need a resource that * can be mapped by a 32-bit BAR. */ static void pci_clip_resource_to_region(struct pci_bus *bus, struct resource *res, struct pci_bus_region *region) { struct pci_bus_region r; pcibios_resource_to_bus(bus, &r, res); if (r.start < region->start) r.start = region->start; if (r.end > region->end) r.end = region->end; if (r.end < r.start) res->end = res->start - 1; else pcibios_bus_to_resource(bus, res, &r); } static int pci_bus_alloc_from_region(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, resource_size_t (*alignf)(void *, const struct resource *, resource_size_t, resource_size_t), void *alignf_data, struct pci_bus_region *region) { int i, ret; struct resource *r, avail; resource_size_t max; type_mask |= IORESOURCE_TYPE_BITS; pci_bus_for_each_resource(bus, r, i) { if (!r) continue; /* type_mask must match */ if ((res->flags ^ r->flags) & type_mask) continue; /* We cannot allocate a non-prefetching resource from a pre-fetching area */ if ((r->flags & IORESOURCE_PREFETCH) && !(res->flags & IORESOURCE_PREFETCH)) continue; avail = *r; pci_clip_resource_to_region(bus, &avail, region); /* * "min" is typically PCIBIOS_MIN_IO or PCIBIOS_MIN_MEM to * protect badly documented motherboard resources, but if * this is an already-configured bridge window, its start * overrides "min". */ if (avail.start) min = avail.start; max = avail.end; /* Ok, try it out.. */ ret = allocate_resource(r, res, size, min, max, align, alignf, alignf_data); if (ret == 0) return 0; } return -ENOMEM; } /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus * @res: resource to allocate * @size: size of resource to allocate * @align: alignment of resource to allocate * @min: minimum /proc/iomem address to allocate * @type_mask: IORESOURCE_* type flags * @alignf: resource alignment function * @alignf_data: data argument for resource alignment function * * Given the PCI bus a device resides on, the size, minimum address, * alignment and type, try to find an acceptable resource allocation * for a specific device resource. */ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t size, resource_size_t align, resource_size_t min, unsigned int type_mask, resource_size_t (*alignf)(void *, const struct resource *, resource_size_t, resource_size_t), void *alignf_data) { #ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT int rc; if (res->flags & IORESOURCE_MEM_64) { rc = pci_bus_alloc_from_region(bus, res, size, align, min, type_mask, alignf, alignf_data, &pci_high); if (rc == 0) return 0; return pci_bus_alloc_from_region(bus, res, size, align, min, type_mask, alignf, alignf_data, &pci_64_bit); } #endif return pci_bus_alloc_from_region(bus, res, size, align, min, type_mask, alignf, alignf_data, &pci_32_bit); } void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { } /** * pci_bus_add_device - start driver for a single device * @dev: device to add * * This adds add sysfs entries and start device drivers */ int pci_bus_add_device(struct pci_dev *dev) { int retval; /* * Can not put in pci_device_add yet because resources * are not assigned yet for some devices. */ pci_fixup_device(pci_fixup_final, dev); pci_create_sysfs_dev_files(dev); pci_proc_attach_device(dev); dev->match_driver = true; retval = device_attach(&dev->dev); WARN_ON(retval < 0); dev->is_added = 1; return 0; } /** * pci_bus_add_devices - start driver for PCI devices * @bus: bus to check for new devices * * Start driver for PCI devices and add some sysfs entries. */ void pci_bus_add_devices(const struct pci_bus *bus) { struct pci_dev *dev; struct pci_bus *child; int retval; list_for_each_entry(dev, &bus->devices, bus_list) { /* Skip already-added devices */ if (dev->is_added) continue; retval = pci_bus_add_device(dev); if (retval) dev_err(&dev->dev, "Error adding device (%d)\n", retval); } list_for_each_entry(dev, &bus->devices, bus_list) { BUG_ON(!dev->is_added); child = dev->subordinate; if (child) pci_bus_add_devices(child); } } /** pci_walk_bus - walk devices on/under bus, calling callback. * @top bus whose devices should be walked * @cb callback to be called for each device found * @userdata arbitrary pointer to be passed to callback. * * Walk the given bus, including any bridged devices * on buses under this bus. Call the provided callback * on each device found. * * We check the return of @cb each time. If it returns anything * other than 0, we break out. * */ void pci_walk_bus(struct pci_bus *top, int (*cb)(struct pci_dev *, void *), void *userdata) { struct pci_dev *dev; struct pci_bus *bus; struct list_head *next; int retval; bus = top; down_read(&pci_bus_sem); next = top->devices.next; for (;;) { if (next == &bus->devices) { /* end of this bus, go up or finish */ if (bus == top) break; next = bus->self->bus_list.next; bus = bus->self->bus; continue; } dev = list_entry(next, struct pci_dev, bus_list); if (dev->subordinate) { /* this is a pci-pci bridge, do its devices next */ next = dev->subordinate->devices.next; bus = dev->subordinate; } else next = dev->bus_list.next; retval = cb(dev, userdata); if (retval) break; } up_read(&pci_bus_sem); } EXPORT_SYMBOL_GPL(pci_walk_bus); struct pci_bus *pci_bus_get(struct pci_bus *bus) { if (bus) get_device(&bus->dev); return bus; } EXPORT_SYMBOL(pci_bus_get); void pci_bus_put(struct pci_bus *bus) { if (bus) put_device(&bus->dev); } EXPORT_SYMBOL(pci_bus_put); EXPORT_SYMBOL(pci_bus_alloc_resource); EXPORT_SYMBOL_GPL(pci_bus_add_device); EXPORT_SYMBOL(pci_bus_add_devices);