/* * MPC8272 ADS Device Tree Source * * Copyright 2005,2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ /dts-v1/; / { model = "MPC8272ADS"; compatible = "fsl,mpc8272ads"; #address-cells = <1>; #size-cells = <1>; cpus { #address-cells = <1>; #size-cells = <0>; PowerPC,8272@0 { device_type = "cpu"; reg = <0x0>; d-cache-line-size = <32>; i-cache-line-size = <32>; d-cache-size = <16384>; i-cache-size = <16384>; timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; }; }; memory { device_type = "memory"; reg = <0x0 0x0>; }; localbus@f0010100 { compatible = "fsl,mpc8272-localbus", "fsl,pq2-localbus"; #address-cells = <2>; #size-cells = <1>; reg = <0xf0010100 0x40>; ranges = <0x0 0x0 0xfe000000 0x2000000 0x1 0x0 0xf4500000 0x8000 0x3 0x0 0xf8200000 0x8000>; flash@0,0 { compatible = "jedec-flash"; reg = <0x0 0x0 0x2000000>; bank-width = <4>; device-width = <1>; }; board-control@1,0 { reg = <0x1 0x0 0x20>; compatible = "fsl,mpc8272ads-bcsr"; }; PCI_PIC: interrupt-controller@3,0 { compatible = "fsl,mpc8272ads-pci-pic", "fsl,pq2ads-pci-pic"; #interrupt-cells = <1>; interrupt-controller; reg = <0x3 0x0 0x8>; interrupt-parent = <&PIC>; interrupts = <20 8>; }; }; pci@f0010800 { device_type = "pci"; reg = <0xf0010800 0x10c 0xf00101ac 0x8 0xf00101c4 0x8>; compatible = "fsl,mpc8272-pci", "fsl,pq2-pci"; #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; clock-frequency = <66666666>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = < /* IDSEL 0x16 */ 0xb000 0x0 0x0 0x1 &PCI_PIC 0 0xb000 0x0 0x0 0x2 &PCI_PIC 1 0xb000 0x0 0x0 0x3 &PCI_PIC 2 0xb000 0x0 0x0 0x4 &PCI_PIC 3 /* IDSEL 0x17 */ 0xb800 0x0 0x0 0x1 &PCI_PIC 4 0xb800 0x0 0x0 0x2 &PCI_PIC 5 0xb800 0x0 0x0 0x3 &PCI_PIC 6 0xb800 0x0 0x0 0x4 &PCI_PIC 7 /* IDSEL 0x18 */ 0xc000 0x0 0x0 0x1 &PCI_PIC 8 0xc000 0x0 0x0 0x2 &PCI_PIC 9 0xc000 0x0 0x0 0x3 &PCI_PIC 10 0xc000 0x0 0x0 0x4 &PCI_PIC 11>; interrupt-parent = <&PIC>; interrupts = <18 8>; ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 0x1000000 0x0 0x0 0xf6000000 0x0 0x2000000>; }; soc@f0000000 { #address-cells = <1>; #size-cells = <1>; device_type = "soc"; compatible = "fsl,mpc8272", "fsl,pq2-soc"; ranges = <0x0 0xf0000000 0x53000>; // Temporary -- will go away once kernel uses ranges for get_immrbase(). reg = <0xf0000000 0x53000>; cpm@119c0 { #address-cells = <1>; #size-cells = <1>; compatible = "fsl,mpc8272-cpm", "fsl,cpm2"; reg = <0x119c0 0x30>; ranges; muram@0 { #address-cells = <1>; #size-cells = <1>; ranges = <0x0 0x0 0x10000>; data@0 { compatible = "fsl,cpm-muram-data"; reg = <0x0 0x2000 0x9800 0x800>; }; }; brg@119f0 { compatible = "fsl,mpc8272-brg", "fsl,cpm2-brg", "fsl,cpm-brg"; reg = <0x119f0 0x10 0x115f0 0x10>; }; serial@11a00 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; reg = <0x11a00 0x20 0x8000 0x100>; interrupts = <40 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <1>; fsl,cpm-command = <0x800000>; }; serial@11a60 { device_type = "serial"; compatible = "fsl,mpc8272-scc-uart", "fsl,cpm2-scc-uart"; reg = <0x11a60 0x20 0x8300 0x100>; interrupts = <43 8>; interrupt-parent = <&PIC>; fsl,cpm-brg = <4>; fsl,cpm-command = <0xce00000>; }; mdio@10d40 { device_type = "mdio"; compatible = "fsl,mpc8272ads-mdio-bitbang", "fsl,mpc8272-mdio-bitbang", "fsl,cpm2-mdio-bitbang"; reg = <0x10d40 0x14>; #address-cells = <1>; #size-cells = <0>; fsl,mdio-pin = <18>; fsl,mdc-pin = <19>; PHY0: ethernet-phy@0 { interrupt-parent = <&PIC>; interrupts = <23 8>; reg = <0x0>; device_type = "ethernet-phy"; }; PHY1: ethernet-phy@1 { interrupt-parent = <&PIC>; interrupts = <23 8>; reg = <0x3>; device_type = "ethernet-phy"; }; }; ethernet@11300 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <0x11300 0x20 0x8400 0x100 0x11390 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <32 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY0>; linux,network-index = <0>; fsl,cpm-command = <0x12000300>; }; ethernet@11320 { device_type = "network"; compatible = "fsl,mpc8272-fcc-enet", "fsl,cpm2-fcc-enet"; reg = <0x11320 0x20 0x8500 0x100 0x113b0 0x1>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <33 8>; interrupt-parent = <&PIC>; phy-handle = <&PHY1>; linux,network-index = <1>; fsl,cpm-command = <0x16200300>; }; i2c@11860 { compatible = "fsl,mpc8272-i2c", "fsl,cpm2-i2c"; reg = <0x11860 0x20 0x8afc 0x2>; interrupts = <1 8>; interrupt-parent = <&PIC>; fsl,cpm-command = <0x29600000>; #address-cells = <1>; #size-cells = <0>; }; }; PIC: interrupt-controller@10c00 { #interrupt-cells = <2>; interrupt-controller; reg = <0x10c00 0x80>; compatible = "fsl,mpc8272-pic", "fsl,cpm2-pic"; }; /* May need to remove if on a part without crypto engine */ crypto@30000 { device_type = "crypto"; model = "SEC2"; compatible = "fsl,mpc8272-talitos-sec2", "fsl,talitos-sec2", "fsl,talitos", "talitos"; reg = <0x30000 0x10000>; interrupts = <11 8>; interrupt-parent = <&PIC>; num-channels = <4>; channel-fifo-len = <24>; exec-units-mask = <0x7e>; /* desc mask is for rev1.x, we need runtime fixup for >=2.x */ descriptor-types-mask = <0x1010ebf>; }; }; chosen { linux,stdout-path = "/soc/cpm/serial@11a00"; }; };