/* * Author: Anil Kumar * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ /dts-v1/; #include "omap34xx.dtsi" / { model = "TimLL OMAP3 Devkit8000"; compatible = "timll,omap3-devkit8000", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; leds { compatible = "gpio-leds"; heartbeat { label = "devkit8000::led1"; gpios = <&gpio6 26 0>; /* 186 -> LED1 */ default-state = "on"; linux,default-trigger = "heartbeat"; }; mmc { label = "devkit8000::led2"; gpios = <&gpio6 3 0>; /* 163 -> LED2 */ default-state = "on"; linux,default-trigger = "none"; }; usr { label = "devkit8000::led3"; gpios = <&gpio6 4 0>; /* 164 -> LED3 */ default-state = "on"; linux,default-trigger = "usr"; }; }; sound { compatible = "ti,omap-twl4030"; ti,model = "devkit8000"; ti,mcbsp = <&mcbsp2>; ti,codec = <&twl_audio>; ti,audio-routing = "Ext Spk", "PREDRIVEL", "Ext Spk", "PREDRIVER", "MAINMIC", "Main Mic", "Main Mic", "Mic Bias 1"; }; }; &i2c1 { clock-frequency = <2600000>; twl: twl@48 { reg = <0x48>; interrupts = <7>; /* SYS_NIRQ cascaded to intc */ twl_audio: audio { compatible = "ti,twl4030-audio"; codec { }; }; }; }; &i2c2 { status = "disabled"; }; &i2c3 { status = "disabled"; }; #include "twl4030.dtsi" &mmc1 { vmmc-supply = <&vmmc1>; vmmc_aux-supply = <&vsim>; bus-width = <8>; }; &mmc2 { status = "disabled"; }; &mmc3 { status = "disabled"; }; &wdt2 { status = "disabled"; }; &mcbsp1 { status = "disabled"; }; &mcbsp3 { status = "disabled"; }; &mcbsp4 { status = "disabled"; }; &mcbsp5 { status = "disabled"; }; &gpmc { ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */ nand@0,0 { reg = <0 0 0>; /* CS0, offset 0 */ nand-bus-width = <16>; gpmc,sync-clk = <0>; gpmc,cs-on = <0>; gpmc,cs-rd-off = <44>; gpmc,cs-wr-off = <44>; gpmc,adv-on = <6>; gpmc,adv-rd-off = <34>; gpmc,adv-wr-off = <44>; gpmc,we-off = <40>; gpmc,oe-off = <54>; gpmc,access = <64>; gpmc,rd-cycle = <82>; gpmc,wr-cycle = <82>; gpmc,wr-access = <40>; gpmc,wr-data-mux-bus = <0>; #address-cells = <1>; #size-cells = <1>; x-loader@0 { label = "X-Loader"; reg = <0 0x80000>; }; bootloaders@80000 { label = "U-Boot"; reg = <0x80000 0x1e0000>; }; bootloaders_env@260000 { label = "U-Boot Env"; reg = <0x260000 0x20000>; }; kernel@280000 { label = "Kernel"; reg = <0x280000 0x400000>; }; filesystem@680000 { label = "File System"; reg = <0x680000 0xf980000>; }; }; };