/* bttv-cards.c this file has configuration informations - card-specific stuff like the big tvcards array for the most part Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) & Marcus Metzler (mocm@thp.uni-koeln.de) (c) 1999-2001 Gerd Knorr This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include #include #include #include #include #include #include #include #include #include "bttvp.h" #include #include #include "bttv-audio-hook.h" /* fwd decl */ static void boot_msp34xx(struct bttv *btv, int pin); static void boot_bt832(struct bttv *btv); static void hauppauge_eeprom(struct bttv *btv); static void avermedia_eeprom(struct bttv *btv); static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); static void modtec_eeprom(struct bttv *btv); static void init_PXC200(struct bttv *btv); static void init_RTV24(struct bttv *btv); static void rv605_muxsel(struct bttv *btv, unsigned int input); static void eagle_muxsel(struct bttv *btv, unsigned int input); static void xguard_muxsel(struct bttv *btv, unsigned int input); static void ivc120_muxsel(struct bttv *btv, unsigned int input); static void gvc1100_muxsel(struct bttv *btv, unsigned int input); static void PXC200_muxsel(struct bttv *btv, unsigned int input); static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); static void picolo_tetra_init(struct bttv *btv); static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); static void tibetCS16_init(struct bttv *btv); static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); static void kodicom4400r_init(struct bttv *btv); static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); static void geovision_muxsel(struct bttv *btv, unsigned int input); static int terratec_active_radio_upgrade(struct bttv *btv); static int tea5757_read(struct bttv *btv); static int tea5757_write(struct bttv *btv, int value); static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]); static int __devinit pvr_boot(struct bttv *btv); /* config variables */ static unsigned int triton1; static unsigned int vsfx; static unsigned int latency = UNSET; int no_overlay=-1; static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; #ifdef MODULE static unsigned int autoload = 1; #else static unsigned int autoload; #endif static unsigned int gpiomask = UNSET; static unsigned int audioall = UNSET; static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; /* insmod options */ module_param(triton1, int, 0444); module_param(vsfx, int, 0444); module_param(no_overlay, int, 0444); module_param(latency, int, 0444); module_param(gpiomask, int, 0444); module_param(audioall, int, 0444); module_param(autoload, int, 0444); module_param_array(card, int, NULL, 0444); module_param_array(pll, int, NULL, 0444); module_param_array(tuner, int, NULL, 0444); module_param_array(svhs, int, NULL, 0444); module_param_array(remote, int, NULL, 0444); module_param_array(audiomux, int, NULL, 0444); MODULE_PARM_DESC(triton1,"set ETBF pci config bit " "[enable bug compatibility for triton1 + others]"); MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " "[yet another chipset flaw workaround]"); MODULE_PARM_DESC(latency,"pci latency timer"); MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); MODULE_PARM_DESC(tuner,"specify installed tuner type"); MODULE_PARM_DESC(autoload,"automatically load i2c modules like tuner.o, default is 1 (yes)"); MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" " [some VIA/SIS chipsets are known to have problem with overlay]"); /* ----------------------------------------------------------------------- */ /* list of card IDs for bt878+ cards */ static struct CARD { unsigned id; int cardnr; char *name; } cards[] __devinitdata = { { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, /* some cards ship with byteswapped IDs ... */ { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, /* this seems to happen as well ... */ { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, /* clashes with FlyVideo *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, { 0x03116000, BTTV_BOARD_SENSORAY311, "Sensoray 311" }, { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, /* likely broken, vendor id doesn't match the other magic views ... * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ /* Duplicate PCI ID, reconfigure for this board during the eeprom read. * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ /* DVB cards (using pci function .1 for mpeg data xfer) */ { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, { 0, -1, NULL } }; /* ----------------------------------------------------------------------- */ /* array with description for bt848 / bt878 tv/grabber cards */ struct tvcard bttv_tvcards[] = { /* ---- card 0x00 ---------------------------------- */ [BTTV_BOARD_UNKNOWN] = { .name = " *** UNKNOWN/GENERIC *** ", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0 }, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MIRO] = { .name = "MIRO PCTV", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_HAUPPAUGE] = { .name = "Hauppauge (bt848)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_STB] = { .name = "STB, Gateway P/N 6000699 (bt848)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, }, /* ---- card 0x04 ---------------------------------- */ [BTTV_BOARD_INTEL] = { .name = "Intel Create and Share PCI/ Smart Video Recorder III", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_DIAMOND] = { .name = "Diamond DTV2000", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0, 1, 0, 1 }, .gpiomute = 3, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_AVERMEDIA] = { .name = "AVerMedia TVPhone", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomask = 0x0f, .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, /* 0x04 for some cards ?? */ .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= avermedia_tvphone_audio, .has_remote = 1, }, [BTTV_BOARD_MATRIX_VISION] = { .name = "MATRIX-Vision MV-Delta", .video_inputs = 5, .audio_inputs = 1, .tuner = UNSET, .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x08 ---------------------------------- */ [BTTV_BOARD_FLYVIDEO] = { .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0xc00, 0x800, 0x400 }, .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_TURBOTV] = { .name = "IMS/IXmicro TurboTV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 1, 2, 3 }, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_HAUPPAUGE878] = { .name = "Hauppauge (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x0f, /* old: 7 */ .muxsel = { 2, 0, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MIROPRO] = { .name = "MIRO PCTV pro", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3014f, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x0c ---------------------------------- */ [BTTV_BOARD_ADSTECH_TV] = { .name = "ADS Technologies Channel Surfer TV (bt848)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_AVERMEDIA98] = { .name = "AVerMedia TVCapture 98", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 13, 14, 11, 7 }, .needs_tvaudio = 1, .msp34xx_alt = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= avermedia_tv_stereo_audio, .no_gpioirq = 1, }, [BTTV_BOARD_VHX] = { .name = "Aimslab Video Highway Xtreme (VHX)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ZOLTRIX] = { .name = "Zoltrix TV-Max", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0, 1, 0 }, .gpiomute = 10, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x10 ---------------------------------- */ [BTTV_BOARD_PIXVIEWPLAYTV] = { .name = "Prolink Pixelview PlayTV (bt878)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x01fe00, .muxsel = { 2, 3, 1, 1 }, /* 2003-10-20 by "Anton A. Arapov" */ .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_WINVIEW_601] = { .name = "Leadtek WinView 601", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x8300f8, .muxsel = { 2, 3, 1, 1,0 }, .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, .gpiomute = 0xcfa007, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .volume_gpio = winview_volume, .has_radio = 1, }, [BTTV_BOARD_AVEC_INTERCAP] = { .name = "AVEC Intercapture", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 0, 0, 0 }, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_LIFE_FLYKIT] = { .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", .video_inputs = 4, .audio_inputs = 1, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x8dff00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0 }, .no_msp34xx = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x14 ---------------------------------- */ [BTTV_BOARD_CEI_RAFFLES] = { .name = "CEI Raffles Card", .video_inputs = 3, .audio_inputs = 3, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 1 }, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_CONFERENCETV] = { .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", .video_inputs = 4, .audio_inputs = 2, /* tuner, line in */ .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_PHOEBE_TVMAS] = { .name = "Askey CPH050/ Phoebe Tv Master + FM", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xc00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 0x800, 0x400 }, .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MODTEC_205] = { .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 7, .muxsel = { 2, 3, -1 }, .digital_mode = DIGITAL_MODE_CAMERA, .gpiomux = { 0, 0, 0, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSBB5_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x18 ---------------------------------- */ [BTTV_BOARD_MAGICTVIEW061] = { .name = "Askey CPH05X/06X (bt878) [many vendors]", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = {0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0xc00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, }, [BTTV_BOARD_VOBIS_BOOSTAR] = { .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, }, [BTTV_BOARD_HAUPPAUG_WCAM] = { .name = "Hauppauge WinCam newer (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MAXI] = { .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", .video_inputs = 4, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_SECAM, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x1c ---------------------------------- */ [BTTV_BOARD_TERRATV] = { .name = "Terratec TerraTV+ Version 1.1 (bt878)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1f0fff, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, .gpiomute = 0x40000, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= terratv_audio, /* GPIO wiring: External 20 pin connector (for Active Radio Upgrade board) gpio00: i2c-sda gpio01: i2c-scl gpio02: om5610-data gpio03: om5610-clk gpio04: om5610-wre gpio05: om5610-stereo gpio06: rds6588-davn gpio07: Pin 7 n.c. gpio08: nIOW gpio09+10: nIOR, nSEL ?? (bt878) gpio09: nIOR (bt848) gpio10: nSEL (bt848) Sound Routing: gpio16: u2-A0 (1st 4052bt) gpio17: u2-A1 gpio18: u2-nEN gpio19: u4-A0 (2nd 4052) gpio20: u4-A1 u4-nEN - GND Btspy: 00000 : Cdrom (internal audio input) 10000 : ext. Video audio input 20000 : TV Mono a0000 : TV Mono/2 1a0000 : TV Stereo 30000 : Radio 40000 : Mute */ }, [BTTV_BOARD_PXC200] = { /* Jannik Fritsch */ .name = "Imagenation PXC200", .video_inputs = 5, .audio_inputs = 1, .tuner = UNSET, .svhs = 1, /* was: 4 */ .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0}, .gpiomux = { 0 }, .needs_tvaudio = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .muxsel_hook = PXC200_muxsel, }, [BTTV_BOARD_FLYVIDEO_98] = { .name = "Lifeview FlyVideo 98 LR50", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, /* 0x8dfe00 */ .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_IPROTV] = { .name = "Formac iProTV, Formac ProTV I (bt848)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 1, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 0, 0, 0 }, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x20 ---------------------------------- */ [BTTV_BOARD_INTEL_C_S_PCI] = { .name = "Intel Create and Share PCI/ Smart Video Recorder III", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_TERRATVALUE] = { .name = "Terratec TerraTValue Version Bt878", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xffff00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x500, 0, 0x300, 0x900 }, .gpiomute = 0x900, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_WINFAST2000] = { .name = "Leadtek WinFast 2000/ WinFast 2000 XP", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 1, 0 }, /* TV, CVid, SVid, CVid over SVid connector */ /* Alexander Varakin [stereo version] */ .gpiomask = 0xb33000, .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, .gpiomute = 0x800000, /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) gpio23 -- hef4052:nEnable (0x800000) gpio12 -- hef4052:A1 gpio13 -- hef4052:A0 0x0000: external audio 0x1000: FM 0x2000: TV 0x3000: n.c. Note: There exists another variant "Winfast 2000" with tv stereo !? Note: eeprom only contains FF and pci subsystem id 107d:6606 */ .needs_tvaudio = 0, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= winfast2000_audio, .has_remote = 1, }, [BTTV_BOARD_CHRONOS_VS2] = { .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x24 ---------------------------------- */ [BTTV_BOARD_TYPHOON_TVIEW] = { .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1800, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, .gpiomute = 0x1800, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, }, [BTTV_BOARD_PXELVWPLTVPRO] = { .name = "Prolink PixelView PlayTV pro", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xff, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MAGICTVIEW063] = { .name = "Askey CPH06X TView99", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x551e00, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0x551400, 0x551200, 0, 0 }, .gpiomute = 0x551c00, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, }, [BTTV_BOARD_PINNACLE] = { .name = "Pinnacle PCTV Studio/Rave", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 0xd0001, 0, 0 }, .gpiomute = 1, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x28 ---------------------------------- */ [BTTV_BOARD_STB2] = { .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 4, 0, 2, 3 }, .gpiomute = 1, .no_msp34xx = 1, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, }, [BTTV_BOARD_AVPHONE98] = { .name = "AVerMedia TVPhone 98", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 13, 4, 11, 7 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, .audio_mode_gpio= avermedia_tvphone_audio, }, [BTTV_BOARD_PV951] = { .name = "ProVideo PV951", /* pic16c54 */ .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0, .muxsel = { 2, 3, 1, 1}, .gpiomux = { 0, 0, 0, 0}, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ONAIR_TV] = { .name = "Little OnAir TV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00b, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, .gpiomute = 0xff3ffc, .no_msp34xx = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x2c ---------------------------------- */ [BTTV_BOARD_SIGMA_TVII_FM] = { .name = "Sigma TVII-FM", .video_inputs = 2, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 1, 0, 2 }, .gpiomute = 3, .no_msp34xx = 1, .pll = PLL_NONE, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MATRIX_VISION2] = { .name = "MATRIX-Vision MV-Delta 2", .video_inputs = 5, .audio_inputs = 1, .tuner = UNSET, .svhs = 3, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ZOLTRIX_GENIE] = { .name = "Zoltrix Genie TV/FM", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xbcf03f, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, .gpiomute = 0xbcb03f, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4039FR5_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_TERRATVRADIO] = { .name = "Terratec TV/Radio+", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x70000, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, .gpiomute = 0x40000, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, }, /* ---- card 0x30 ---------------------------------- */ [BTTV_BOARD_DYNALINK] = { .name = "Askey CPH03x/ Dynalink Magic TView", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = {2,0,0,0 }, .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_GVBCTV3PCI] = { .name = "IODATA GV-BCTV3/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_ALPS_TSHC6_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= gvbctv3pci_audio, }, [BTTV_BOARD_PXELVWPLTVPAK] = { .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", .video_inputs = 5, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 0xAA0000, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, .gpiomute = 0xa8000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, /* GPIO wiring: (different from Rev.4C !) GPIO17: U4.A0 (first hef4052bt) GPIO19: U4.A1 GPIO20: U5.A1 (second hef4052bt) GPIO21: U4.nEN GPIO22: BT832 Reset Line GPIO23: A5,A0, U5,nEN Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 */ }, [BTTV_BOARD_EAGLE] = { .name = "Eagle Wireless Capricorn2 (bt878A)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 0, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .pll = PLL_28, .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x34 ---------------------------------- */ [BTTV_BOARD_PINNACLEPRO] = { /* David Härdeman */ .name = "Pinnacle PCTV Studio Pro", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 0xd0001, 0, 0 }, .gpiomute = 10, /* sound path (5 sources): MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 0= ext. Audio IN 1= from MUX2 2= Mono TV sound from Tuner 3= not connected MUX2 (mask 0x30000): 0,2,3= from MSP34xx 1= FM stereo Radio from Tuner */ .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_TVIEW_RDS_FM] = { /* Claas Langbehn , Sven Grothklags */ .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x1c, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0, 0x10, 8 }, .gpiomute = 4, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, }, [BTTV_BOARD_LIFETEC_9415] = { /* Tim Röstermundt in de.comp.os.unix.linux.hardware: options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff options tuner type=5 */ .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x18e0, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, .gpiomute = 0x18e0, /* For cards with tda9820/tda9821: 0x0000: Tuner normal stereo 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 0x0880: Tuner A2 stereo */ .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_BESTBUY_EASYTV] = { /* Miguel Angel Alvarez old Easy TV BT848 version (model CPH031) */ .name = "Askey CPH031/ BESTBUY Easy TV", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xF, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x38 ---------------------------------- */ [BTTV_BOARD_FLYVIDEO_98FM] = { /* Gordon Heydon */ [BTTV_BOARD_GRANDTEC] = { .name = "GrandTec 'Grand Video Capture' (Bt848)", .video_inputs = 2, .audio_inputs = 0, .tuner = UNSET, .svhs = 1, .gpiomask = 0, .muxsel = { 3, 1 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_35, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ASKEY_CPH060] = { /* Daniel Herrington */ .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xe00, .muxsel = { 2, 3, 1, 1}, .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, .gpiomute = 0x800, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4036FY5_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ASKEY_CPH03X] = { /* Matti Mottus */ .name = "Askey CPH03x TV Capturer", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x03000F, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x3c ---------------------------------- */ [BTTV_BOARD_MM100PCTV] = { /* Philip Blundell */ .name = "Modular Technology MM100PCTV", .video_inputs = 2, .audio_inputs = 2, .tuner = 0, .svhs = UNSET, .gpiomask = 11, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 0, 0, 1 }, .gpiomute = 8, .pll = PLL_35, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_GMV1] = { /* Adrian Cox new Easy TV BT878 version (model CPH061) special thanks to Informatica Mieres for providing the card */ .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 1, 0, 4, 4 }, .gpiomute = 9, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_ATI_TVWONDER] = { /* Lukas Gebauer */ .name = "ATI TV-Wonder", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0xf03f, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, .gpiomute = 0xbffe, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x40 ---------------------------------- */ [BTTV_BOARD_ATI_TVWONDERVE] = { /* Lukas Gebauer */ .name = "ATI TV-Wonder VE", .video_inputs = 2, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 1, .muxsel = { 2, 3, 0, 1 }, .gpiomux = { 0, 0, 1, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_FLYVIDEO2000] = { /* DeeJay */ .name = "IODATA GV-BCTV4/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x010f00, .muxsel = {2, 3, 0, 0 }, .gpiomux = {0x10000, 0, 0x10000, 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= gvbctv3pci_audio, }, /* ---- card 0x44 ---------------------------------- */ [BTTV_BOARD_VOODOOTV_FM] = { .name = "3Dfx VoodooTV FM (Euro)", /* try "insmod msp3400 simple=0" if you have * sound problems with this card. */ .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 0x4f8a00, /* 0x100000: 1=MSP enabled (0=disable again) * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo * tuner, Composit, SVid, Composit-on-Svid-adapter */ .muxsel = { 2, 3 ,0 ,1 }, .tuner_type = TUNER_MT2032, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, }, [BTTV_BOARD_VOODOOTV_200] = { .name = "VoodooTV 200 (USA)", /* try "insmod msp3400 simple=0" if you have * sound problems with this card. */ .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 0x4f8a00, /* 0x100000: 1=MSP enabled (0=disable again) * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, .gpiomute = 0x947fff, /* tvtuner, radio, external,internal, mute, stereo * tuner, Composit, SVid, Composit-on-Svid-adapter */ .muxsel = { 2, 3 ,0 ,1 }, .tuner_type = TUNER_MT2032, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, }, [BTTV_BOARD_AIMMS] = { /* Philip Blundell */ .name = "Active Imaging AIMMS", .video_inputs = 1, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .muxsel = { 2 }, .gpiomask = 0 }, [BTTV_BOARD_PV_BT878P_PLUS] = { /* Tomasz Pyra */ .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", .video_inputs = 3, .audio_inputs = 4, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ .gpiomute = 13, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_I_FM, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, /* GPIO wiring: GPIO0: U4.A0 (hef4052bt) GPIO1: U4.A1 GPIO2: U4.A1 (second hef4052bt) GPIO3: U4.nEN, U5.A0, A5.nEN GPIO8-15: vrd866b ? */ }, [BTTV_BOARD_FLYVIDEO98EZ] = { .name = "Lifeview FlyVideo 98EZ (capture only) LR51", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = 2, .muxsel = { 2, 3, 1, 1 }, /* AV1, AV2, SVHS, CVid adapter on SVHS */ .pll = PLL_28, .no_msp34xx = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x48 ---------------------------------- */ [BTTV_BOARD_PV_BT878P_9B] = { /* Dariusz Kowalewski */ .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, .gpiomute = 0x09, .needs_tvaudio = 1, .no_msp34xx = 1, .no_tda9875 = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ .has_radio = 1, /* Note: not all cards have radio */ .has_remote = 1, /* GPIO wiring: GPIO0: A0 hef4052 GPIO1: A1 hef4052 GPIO3: nEN hef4052 GPIO8-15: vrd866b GPIO20,22,23: R30,R29,R28 */ }, [BTTV_BOARD_SENSORAY311] = { /* Clay Kunz */ /* you must jumper JP5 for the card to work */ .name = "Sensoray 311", .video_inputs = 5, .audio_inputs = 0, .tuner = UNSET, .svhs = 4, .gpiomask = 0, .muxsel = { 2, 3, 1, 0, 0 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_RV605] = { /* Miguel Freitas */ .name = "RemoteVision MX (RV605)", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x00, .gpiomask2 = 0x07ff, .muxsel = { 0x33, 0x13, 0x23, 0x43, 0xf3, 0x73, 0xe3, 0x03, 0xd3, 0xb3, 0xc3, 0x63, 0x93, 0x53, 0x83, 0xa3 }, .no_msp34xx = 1, .no_tda9875 = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .muxsel_hook = rv605_muxsel, }, [BTTV_BOARD_POWERCLR_MTV878] = { .name = "Powercolor MTV878/ MTV878R/ MTV878F", .video_inputs = 3, .audio_inputs = 2, .tuner = 0, .svhs = 2, .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ .muxsel = { 2, 1, 1, }, .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 4, .needs_tvaudio = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, }, /* ---- card 0x4c ---------------------------------- */ [BTTV_BOARD_WINDVR] = { /* Masaki Suzuki */ .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x140007, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= windvr_audio, }, [BTTV_BOARD_GRANDTEC_MULTI] = { .name = "GrandTec Multi Capture Card (Bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_KWORLD] = { .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", .video_inputs = 4, .audio_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, /* Tuner, SVid, SVHS, SVid to SVHS connector */ .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! * This card lacks external Audio In, so we mute it on Ext. & Int. * The PCB can take a sbx1637/sbx1673, wiring unknown. * This card lacks PCI subsystem ID, sigh. * gpiomux =1: lower volume, 2+3: mute * btwincap uses 0x80000/0x80003 */ .gpiomute = 4, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and radio signal strength indicators work fine. */ .has_radio = 1, /* GPIO Info: GPIO0,1: HEF4052 A0,A1 GPIO2: HEF4052 nENABLE GPIO3-7: n.c. GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] GPIO14,15: ?? GPIO16-21: n.c. GPIO22,23: ?? ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ }, [BTTV_BOARD_DSP_TCVIDEO] = { /* Arthur Tetzlaff-Deas, DSP Design Ltd */ .name = "DSP Design TCVIDEO", .video_inputs = 4, .svhs = UNSET, .muxsel = { 2, 3, 1, 0 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x50 ---------------------------------- */ [BTTV_BOARD_HAUPPAUGEPVR] = { .name = "Hauppauge WinTV PVR", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 0, 1, 1 }, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 7, .gpiomux = {7}, }, [BTTV_BOARD_GVBCTV5PCI] = { .name = "IODATA GV-BCTV5/PCI", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x0f0f80, .muxsel = {2, 3, 1, 0 }, .gpiomux = {0x030000, 0x010000, 0, 0 }, .gpiomute = 0x020000, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= gvbctv5pci_audio, .has_radio = 1, }, [BTTV_BOARD_OSPREY1x0] = { .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ .video_inputs = 4, /* id-inputs-clock */ .audio_inputs = 0, .tuner = UNSET, .svhs = 3, .muxsel = { 3, 2, 0, 1 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x0_848] = { .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ .video_inputs = 3, .audio_inputs = 0, .tuner = UNSET, .svhs = 2, .muxsel = { 2, 3, 1 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x54 ---------------------------------- */ [BTTV_BOARD_OSPREY101_848] = { .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ .video_inputs = 2, .audio_inputs = 0, .tuner = UNSET, .svhs = 1, .muxsel = { 3, 1 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1] = { .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ .video_inputs = 1, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .muxsel = { 0 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY1x1_SVID] = { .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ .video_inputs = 2, .audio_inputs = 0, .tuner = UNSET, .svhs = 1, .muxsel = { 0, 1 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2xx] = { .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ .video_inputs = 1, .audio_inputs = 1, .tuner = UNSET, .svhs = UNSET, .muxsel = { 0 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x58 ---------------------------------- */ [BTTV_BOARD_OSPREY2x0_SVID] = { .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ .video_inputs = 2, .audio_inputs = 1, .tuner = UNSET, .svhs = 1, .muxsel = { 0, 1 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY2x0] = { .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ .video_inputs = 2, .audio_inputs = 1, .tuner = UNSET, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY500] = { .name = "Osprey 500", /* 500 */ .video_inputs = 2, .audio_inputs = 1, .tuner = UNSET, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, [BTTV_BOARD_OSPREY540] = { .name = "Osprey 540", /* 540 */ .video_inputs = 4, .audio_inputs = 1, .tuner = UNSET, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x5C ---------------------------------- */ [BTTV_BOARD_OSPREY2000] = { .name = "Osprey 2000", /* 2000 */ .video_inputs = 2, .audio_inputs = 1, .tuner = UNSET, .svhs = 1, .muxsel = { 2, 3 }, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ }, [BTTV_BOARD_IDS_EAGLE] = { /* M G Berberich */ .name = "IDS Eagle", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, .gpiomask = 0, .muxsel = { 0, 1, 2, 3 }, .muxsel_hook = eagle_muxsel, .no_msp34xx = 1, .no_tda9875 = 1, .pll = PLL_28, }, [BTTV_BOARD_PINNACLESAT] = { .name = "Pinnacle PCTV Sat", .video_inputs = 2, .audio_inputs = 0, .svhs = 1, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = { 3, 1 }, .pll = PLL_28, .no_gpioirq = 1, .has_dvb = 1, }, [BTTV_BOARD_FORMAC_PROTV] = { .name = "Formac ProTV II (bt878)", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 2, /* TV, Comp1, Composite over SVID con, SVID */ .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 2, 0, 0 }, .pll = PLL_28, .has_radio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, /* sound routing: GPIO=0x00,0x01,0x03: mute (?) 0x02: both TV and radio (tuner: FM1216/I) The card has onboard audio connectors labeled "cdrom" and "board", not soldered here, though unknown wiring. Card lacks: external audio in, pci subsystem id. */ }, /* ---- card 0x60 ---------------------------------- */ [BTTV_BOARD_MACHTV] = { .name = "MachTV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 7, .muxsel = { 2, 3, 1, 1}, .gpiomux = { 0, 1, 2, 3}, .gpiomute = 4, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, }, [BTTV_BOARD_EURESYS_PICOLO] = { .name = "Euresys Picolo", .video_inputs = 3, .audio_inputs = 0, .tuner = UNSET, .svhs = 2, .gpiomask = 0, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = { 2, 0, 1}, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_PV150] = { /* Luc Van Hoeylandt */ .name = "ProVideo PV150", /* 0x4f */ .video_inputs = 2, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0, .muxsel = { 2, 3 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_AD_TVK503] = { /* Hiroshi Takekawa */ /* This card lacks subsystem ID */ .name = "AD-TVK503", /* 0x63 */ .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x001e8007, .muxsel = { 2, 3, 1, 0 }, /* Tuner, Radio, external, internal, off, on */ .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, .gpiomute = 0x0f, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .audio_mode_gpio= adtvk503_audio, }, /* ---- card 0x64 ---------------------------------- */ [BTTV_BOARD_HERCULES_SM_TV] = { .name = "Hercules Smart TV Stereo", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, .needs_tvaudio = 1, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, /* Notes: - card lacks subsystem ID - stereo variant w/ daughter board with tda9874a @0xb0 - Audio Routing: always from tda9874 independent of GPIO (?) external line in: unknown - Other chips: em78p156elp @ 0x96 (probably IR remote control) hef4053 (instead 4052) for unknown function */ }, [BTTV_BOARD_PACETV] = { .name = "Pace TV & Radio Card", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 1 }, /* Tuner, CVid, SVid, CVid over SVid connector */ .gpiomask = 0, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, .pll = PLL_28, /* Bt878, Bt832, FI1246 tuner; no pci subsystem id only internal line out: (4pin header) RGGL Radio must be decoded by msp3410d (not routed through)*/ /* .digital_mode = DIGITAL_MODE_CAMERA, todo! */ }, [BTTV_BOARD_IVC200] = { /* Chris Willing */ .name = "IVC-200", .video_inputs = 1, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, .gpiomask = 0xdf, .muxsel = { 2 }, .pll = PLL_28, }, [BTTV_BOARD_XGUARD] = { .name = "Grand X-Guard / Trust 814PCI", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask2 = 0xff, .muxsel = { 2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0 }, .muxsel_hook = xguard_muxsel, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, }, /* ---- card 0x68 ---------------------------------- */ [BTTV_BOARD_NEBULA_DIGITV] = { .name = "Nebula Electronics DigiTV", .video_inputs = 1, .tuner = UNSET, .svhs = UNSET, .muxsel = { 2, 3, 1, 0 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_dvb = 1, .has_remote = 1, .gpiomask = 0x1b, .no_gpioirq = 1, }, [BTTV_BOARD_PV143] = { /* Jorge Boncompte - DTI2 */ .name = "ProVideo PV143", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0 }, .needs_tvaudio = 0, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_VD009X1_MINIDIN] = { /* M.Klahr@phytec.de */ .name = "PHYTEC VD-009-X1 MiniDIN (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 0 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_VD009X1_COMBI] = { .name = "PHYTEC VD-009-X1 Combi (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ .svhs = 3, .gpiomask = 0x00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x6c ---------------------------------- */ [BTTV_BOARD_VD009_MINIDIN] = { .name = "PHYTEC VD-009 MiniDIN (bt878)", .video_inputs = 10, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ .svhs = 9, .gpiomask = 0x00, .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x00 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_VD009_COMBI] = { .name = "PHYTEC VD-009 Combi (bt878)", .video_inputs = 10, .audio_inputs = 0, .tuner = UNSET, /* card has no tuner */ .svhs = 9, .gpiomask = 0x00, .gpiomask2 = 0x03, /* gpiomask2 defines the bits used to switch audio via the upper nibble of muxsel. here: used for xternal video-mux */ .muxsel = { 0x02, 0x12, 0x22, 0x32, 0x03, 0x13, 0x23, 0x33, 0x01, 0x01 }, .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_IVC100] = { .name = "IVC-100", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, .gpiomask = 0xdf, .muxsel = { 2, 3, 1, 0 }, .pll = PLL_28, }, [BTTV_BOARD_IVC120] = { /* IVC-120G - Alan Garfield */ .name = "IVC-120G", .video_inputs = 16, .audio_inputs = 0, /* card has no audio */ .tuner = UNSET, /* card has no tuner */ .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, /* card has no svhs */ .needs_tvaudio = 0, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .gpiomask = 0x00, .muxsel = { 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, 0x10 }, .muxsel_hook = ivc120_muxsel, .pll = PLL_28, }, /* ---- card 0x70 ---------------------------------- */ [BTTV_BOARD_PC_HDTV] = { .name = "pcHDTV HD-2000 TV", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0 }, .tuner_type = TUNER_PHILIPS_ATSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_dvb = 1, }, [BTTV_BOARD_TWINHAN_DST] = { .name = "Twinhan DST + clones", .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_video = 1, .has_dvb = 1, }, [BTTV_BOARD_WINFASTVC100] = { .name = "Winfast VC100", .video_inputs = 3, .audio_inputs = 0, .svhs = 1, .tuner = UNSET, .muxsel = { 3, 1, 1, 3 }, /* Vid In, SVid In, Vid over SVid in connector */ .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, }, [BTTV_BOARD_TEV560] = { .name = "Teppro TEV-560/InterVision IV-560", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 3, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 1, 1, 1, 1 }, .needs_tvaudio = 1, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_35, }, /* ---- card 0x74 ---------------------------------- */ [BTTV_BOARD_SIMUS_GVC1100] = { .name = "SIMUS GVC1100", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .muxsel = { 2, 2, 2, 2 }, .gpiomask = 0x3F, .muxsel_hook = gvc1100_muxsel, }, [BTTV_BOARD_NGSTV_PLUS] = { /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ .name = "NGS NGSTV+", .video_inputs = 3, .tuner = 0, .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 0, 0 }, .gpiomux = { 0, 0, 0, 0 }, .gpiomute = 0x000003, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, }, [BTTV_BOARD_LMLBT4] = { /* http://linuxmedialabs.com */ .name = "LMLBT4", .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .muxsel = { 2, 3, 1, 0 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .needs_tvaudio = 0, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_TEKRAM_M205] = { /* Helmroos Harri */ .name = "Tekram M205 PRO", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = 2, .needs_tvaudio = 0, .gpiomask = 0x68, .muxsel = { 2, 3, 1 }, .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, .pll = PLL_28, }, /* ---- card 0x78 ---------------------------------- */ [BTTV_BOARD_CONTVFMI] = { /* Javier Cendan Ares */ /* bt878 TV + FM without subsystem ID */ .name = "Conceptronic CONTVFMi", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x008007, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, .has_radio = 1, }, [BTTV_BOARD_PICOLO_TETRA_CHIP] = { /*Eric DEBIEF */ /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controled*/ /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the folowing declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ /*0x79 in bttv.h*/ .name = "Euresys Picolo Tetra", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0, .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .muxsel = {2,2,2,2},/*878A input is always MUX0, see above.*/ .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ .pll = PLL_28, .needs_tvaudio = 0, .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_SPIRIT_TV] = { /* Spirit TV Tuner from http://spiritmodems.com.au */ /* Stafford Goodsell */ .name = "Spirit TV Tuner", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x0000000f, .muxsel = { 2, 1, 1 }, .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, .tuner_type = TUNER_TEMIC_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, }, [BTTV_BOARD_AVDVBT_771] = { /* Wolfram Joost */ .name = "AVerMedia AVerTV DVB-T 771", .video_inputs = 2, .svhs = 1, .tuner = UNSET, .tuner_type = TUNER_ABSENT, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .muxsel = { 3 , 3 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .has_dvb = 1, .no_gpioirq = 1, .has_remote = 1, }, /* ---- card 0x7c ---------------------------------- */ [BTTV_BOARD_AVDVBT_761] = { /* Matt Jesson */ /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ .name = "AverMedia AverTV DVB-T 761", .video_inputs = 2, .tuner = UNSET, .svhs = 1, .muxsel = { 3, 1, 2, 0 }, /* Comp0, S-Video, ?, ? */ .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_dvb = 1, .no_gpioirq = 1, .has_remote = 1, }, [BTTV_BOARD_MATRIX_VISIONSQ] = { /* andre.schwarz@matrix-vision.de */ .name = "MATRIX Vision Sigma-SQ", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x0, .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3 }, .muxsel_hook = sigmaSQ_muxsel, .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MATRIX_VISIONSLC] = { /* andre.schwarz@matrix-vision.de */ .name = "MATRIX Vision Sigma-SLC", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x0, .muxsel = { 2, 2, 2, 2 }, .muxsel_hook = sigmaSLC_muxsel, .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* BTTV_BOARD_APAC_VIEWCOMP */ [BTTV_BOARD_APAC_VIEWCOMP] = { /* Attila Kondoros */ /* bt878 TV + FM 0x00000000 subsystem ID */ .name = "APAC Viewcomp 878(AMAX)", .video_inputs = 2, .audio_inputs = 1, .tuner = 0, .svhs = UNSET, .gpiomask = 0xFF, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 10, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ .has_radio = 1, /* not every card has radio */ }, /* ---- card 0x80 ---------------------------------- */ [BTTV_BOARD_DVICO_DVBT_LITE] = { /* Chris Pascoe */ .name = "DViCO FusionHDTV DVB-T Lite", .tuner = UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .no_video = 1, .has_dvb = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_VGEAR_MYVCD] = { /* Steven */ .name = "V-Gear MyVCD", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3f, .muxsel = {2, 3, 1, 0 }, .gpiomux = {0x31, 0x31, 0x31, 0x31 }, .gpiomute = 0x31, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC_M, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 0, }, [BTTV_BOARD_SUPER_TV] = { /* Rick C */ .name = "Super TV Tuner", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0 }, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .gpiomask = 0x008007, .gpiomux = { 0, 0x000001,0,0 }, .needs_tvaudio = 1, .has_radio = 1, }, [BTTV_BOARD_TIBET_CS16] = { /* Chris Fanning */ .name = "Tibet Systems 'Progress DVR' CS16", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }, .pll = PLL_28, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .muxsel_hook = tibetCS16_muxsel, }, [BTTV_BOARD_KODICOM_4400R] = { /* Bill Brack */ /* * Note that, because of the card's wiring, the "master" * BT878A chip (i.e. the one which controls the analog switch * and must use this card type) is the 2nd one detected. The * other 3 chips should use card type 0x85, whose description * follows this one. There is a EEPROM on the card (which is * connected to the I2C of one of those other chips), but is * not currently handled. There is also a facility for a * "monitor", which is also not currently implemented. */ .name = "Kodicom 4400R (master)", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, /* GPIO bits 0-9 used for analog switch: * 00 - 03: camera selector * 04 - 06: channel (controller) selector * 07: data (1->on, 0->off) * 08: strobe * 09: reset * bit 16 is input from sync separator for the channel */ .gpiomask = 0x0003ff, .no_gpioirq = 1, .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, [BTTV_BOARD_KODICOM_4400R_SL] = { /* Bill Brack */ /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the * one which controls the analog switch, and must use the card type) * is the 2nd one detected. The other 3 chips should use this card * type */ .name = "Kodicom 4400R (slave)", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .svhs = UNSET, .gpiomask = 0x010000, .no_gpioirq = 1, .muxsel = { 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3 }, .pll = PLL_28, .no_msp34xx = 1, .no_tda7432 = 1, .no_tda9875 = 1, .muxsel_hook = kodicom4400r_muxsel, }, /* ---- card 0x86---------------------------------- */ [BTTV_BOARD_ADLINK_RTV24] = { /* Michael Henson */ /* Adlink RTV24 with special unlock codes */ .name = "Adlink RTV24", .video_inputs = 4, .audio_inputs = 1, .tuner = 0, .svhs = 2, .muxsel = { 2, 3, 1, 0 }, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, }, /* ---- card 0x87---------------------------------- */ [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { /* Michael Krufky */ .name = "DViCO FusionHDTV 5 Lite", .tuner = 0, .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .video_inputs = 3, .audio_inputs = 1, .svhs = 2, .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .has_dvb = 1, }, /* ---- card 0x88---------------------------------- */ [BTTV_BOARD_ACORP_Y878F] = { /* Mauro Carvalho Chehab */ .name = "Acorp Y878F", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x01fe00, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, .gpiomute = 0x002000, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, .tuner_addr = 0xc1 >>1, .radio_addr = 0xc1 >>1, .has_radio = 1, }, /* ---- card 0x89 ---------------------------------- */ [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { .name = "Conceptronic CTVFMi v2", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x001c0007, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 2, 2 }, .gpiomute = 3, .needs_tvaudio = 0, .pll = PLL_28, .tuner_type = TUNER_TENA_9533_DI, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, .has_radio = 1, }, /* ---- card 0x8a ---------------------------------- */ [BTTV_BOARD_PV_BT878P_2E] = { .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", .video_inputs = 5, .audio_inputs = 1, .tuner = 0, .svhs = 3, .gpiomask = 0x01fe00, .muxsel = { 2,3,1,1,-1 }, .digital_mode = DIGITAL_MODE_CAMERA, .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, .gpiomute = 0x12400, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_LG_PAL_FM, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_remote = 1, }, /* ---- card 0x8b ---------------------------------- */ [BTTV_BOARD_PV_M4900] = { /* Sérgio Fortier */ .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3f, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, .gpiomute = 0x29, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = TUNER_YMEC_TVF_5533MF, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .has_radio = 1, .has_remote = 1, }, /* ---- card 0x8c ---------------------------------- */ /* Has four Bt878 chips behind a PCI bridge, each chip has: one external BNC composite input (mux 2) three internal composite inputs (unknown muxes) an 18-bit stereo A/D (CS5331A), which has: one external stereo unblanced (RCA) audio connection one (or 3?) internal stereo balanced (XLR) audio connection input is selected via gpio to a 14052B mux (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) gain is controlled via an X9221A chip on the I2C bus @0x28 sample rate is controlled via gpio to an MK1413S (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) There is neither a tuner nor an svideo input. */ [BTTV_BOARD_OSPREY440] = { .name = "Osprey 440", .video_inputs = 4, .audio_inputs = 2, /* this is meaningless */ .tuner = UNSET, .svhs = UNSET, .muxsel = { 2, 3, 0, 1 }, /* 3,0,1 are guesses */ .gpiomask = 0x303, .gpiomute = 0x000, /* int + 32kHz */ .gpiomux = { 0, 0, 0x000, 0x100}, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x8d ---------------------------------- */ [BTTV_BOARD_ASOUND_SKYEYE] = { .name = "Asound Skyeye PCTV", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 15, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 2, 0, 0, 0 }, .gpiomute = 1, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_NTSC, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x8e ---------------------------------- */ [BTTV_BOARD_SABRENT_TVFM] = { .name = "Sabrent TV-FM (bttv version)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x108007, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 100000, 100002, 100002, 100000 }, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .pll = PLL_28, .tuner_type = TUNER_TNF_5335MF, .tuner_addr = ADDR_UNSET, .has_radio = 1, }, /* ---- card 0x8f ---------------------------------- */ [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { .name = "Hauppauge ImpactVCB (bt878)", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x0f, /* old: 7 */ .muxsel = { 0, 1, 3, 2 }, /* Composite 0-3 */ .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_MACHTV_MAGICTV] = { /* Julian Calaby * Slightly different from original MachTV definition (0x60) * FIXME: RegSpy says gpiomask should be "0x001c800f", but it * stuffs up remote chip. Bug is a pin on the jaecs is not set * properly (methinks) causing no keyup bits being set */ .name = "MagicTV", /* rebranded MachTV */ .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 7, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0, 1, 2, 3 }, .gpiomute = 4, .tuner_type = TUNER_TEMIC_4009FR5_PAL, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .pll = PLL_28, .has_radio = 1, .has_remote = 1, }, [BTTV_BOARD_SSAI_SECURITY] = { .name = "SSAI Security Video Interface", .video_inputs = 4, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .muxsel = { 0, 1, 2, 3 }, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_SSAI_ULTRASOUND] = { .name = "SSAI Ultrasound Video Interface", .video_inputs = 2, .audio_inputs = 0, .tuner = UNSET, .svhs = 1, .muxsel = { 2, 0, 1, 3 }, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, /* ---- card 0x94---------------------------------- */ [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { .name = "DViCO FusionHDTV 2", .tuner = 0, .tuner_type = TUNER_PHILIPS_ATSC, /* FCV1236D */ .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, .video_inputs = 3, .audio_inputs = 1, .svhs = 2, .muxsel = { 2, 3, 1 }, .gpiomask = 0x00e00007, .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, .gpiomute = 0x00c00007, .no_msp34xx = 1, .no_tda9875 = 1, .no_tda7432 = 1, }, /* ---- card 0x95---------------------------------- */ [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { .name = "Typhoon TV-Tuner PCI (50684)", .video_inputs = 3, .audio_inputs = 1, .tuner = 0, .svhs = 2, .gpiomask = 0x3014f, .muxsel = { 2, 3, 1, 1 }, .gpiomux = { 0x20001,0x10001, 0, 0 }, .gpiomute = 10, .needs_tvaudio = 1, .pll = PLL_28, .tuner_type = TUNER_PHILIPS_PAL_I, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, [BTTV_BOARD_GEOVISION_GV600] = { /* emhn@usb.ve */ .name = "Geovision GV-600", .video_inputs = 16, .audio_inputs = 0, .tuner = UNSET, .svhs = UNSET, .gpiomask = 0x0, .muxsel = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2 }, .muxsel_hook = geovision_muxsel, .gpiomux = { 0 }, .no_msp34xx = 1, .pll = PLL_28, .tuner_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, }, }; static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); /* ----------------------------------------------------------------------- */ static unsigned char eeprom_data[256]; /* * identify card */ void __devinit bttv_idcard(struct bttv *btv) { unsigned int gpiobits; int i,type; unsigned short tmp; /* read PCI subsystem ID */ pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_ID, &tmp); btv->cardid = tmp << 16; pci_read_config_word(btv->c.pci, PCI_SUBSYSTEM_VENDOR_ID, &tmp); btv->cardid |= tmp; if (0 != btv->cardid && 0xffffffff != btv->cardid) { /* look for the card */ for (type = -1, i = 0; cards[i].id != 0; i++) if (cards[i].id == btv->cardid) type = i; if (type != -1) { /* found it */ printk(KERN_INFO "bttv%d: detected: %s [card=%d], " "PCI subsystem ID is %04x:%04x\n", btv->c.nr,cards[type].name,cards[type].cardnr, btv->cardid & 0xffff, (btv->cardid >> 16) & 0xffff); btv->c.type = cards[type].cardnr; } else { /* 404 */ printk(KERN_INFO "bttv%d: subsystem: %04x:%04x (UNKNOWN)\n", btv->c.nr, btv->cardid & 0xffff, (btv->cardid >> 16) & 0xffff); printk(KERN_DEBUG "please mail id, board name and " "the correct card= insmod option to video4linux-list@redhat.com\n"); } } /* let the user override the autodetected type */ if (card[btv->c.nr] < bttv_num_tvcards) btv->c.type=card[btv->c.nr]; /* print which card config we are using */ printk(KERN_INFO "bttv%d: using: %s [card=%d,%s]\n",btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, card[btv->c.nr] < bttv_num_tvcards ? "insmod option" : "autodetected"); /* overwrite gpio stuff ?? */ if (UNSET == audioall && UNSET == audiomux[0]) return; if (UNSET != audiomux[0]) { gpiobits = 0; for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; gpiobits |= audiomux[i]; } } else { gpiobits = audioall; for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { bttv_tvcards[btv->c.type].gpiomux[i] = audioall; } } bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; printk(KERN_INFO "bttv%d: gpio config override: mask=0x%x, mux=", btv->c.nr,bttv_tvcards[btv->c.type].gpiomask); for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { printk("%s0x%x", i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); } printk("\n"); } /* * (most) board specific initialisations goes here */ /* Some Modular Technology cards have an eeprom, but no subsystem ID */ static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) { int type = -1; if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) type = BTTV_BOARD_MODTEC_205; else if (0 == strncmp(eeprom_data+20,"Picolo",7)) type = BTTV_BOARD_EURESYS_PICOLO; else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ if (-1 != type) { btv->c.type = type; printk("bttv%d: detected by eeprom: %s [card=%d]\n", btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); } } static void flyvideo_gpio(struct bttv *btv) { int gpio,has_remote,has_radio,is_capture_only,is_lr90,has_tda9820_tda9821; int tuner=UNSET,ttype; gpio_inout(0xffffff, 0); udelay(8); /* without this we would see the 0x1800 mask */ gpio = gpio_read(); /* FIXME: must restore OUR_EN ??? */ /* all cards provide GPIO info, some have an additional eeprom * LR50: GPIO coding can be found lower right CP1 .. CP9 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. * GPIO14-12: n.c. * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) * lowest 3 bytes are remote control codes (no handshake needed) * xxxFFF: No remote control chip soldered * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered * Note: Some bits are Audio_Mask ! */ ttype=(gpio&0x0f0000)>>16; switch(ttype) { case 0x0: tuner=2; /* NTSC, e.g. TPI8NSR11P */ break; case 0x2: tuner=39;/* LG NTSC (newer TAPC series) TAPC-H701P */ break; case 0x4: tuner=5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ break; case 0x6: tuner=37;/* LG PAL (newer TAPC series) TAPC-G702P */ break; case 0xC: tuner=3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ break; default: printk(KERN_INFO "bttv%d: FlyVideo_gpio: unknown tuner type.\n", btv->c.nr); } has_remote = gpio & 0x800000; has_radio = gpio & 0x400000; /* unknown 0x200000; * unknown2 0x100000; */ is_capture_only = !(gpio & 0x008000); /* GPIO15 */ has_tda9820_tda9821 = !(gpio & 0x004000); is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ /* * gpio & 0x001000 output bit for audio routing */ if(is_capture_only) tuner = TUNER_ABSENT; /* No tuner present */ printk(KERN_INFO "bttv%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", btv->c.nr, has_radio? "yes":"no ", has_remote? "yes":"no ", tuner, gpio); printk(KERN_INFO "bttv%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", btv->c.nr, is_lr90?"yes":"no ", has_tda9820_tda9821?"yes":"no ", is_capture_only?"yes":"no "); if (tuner != UNSET) /* only set if known tuner autodetected, else let insmod option through */ btv->tuner_type = tuner; btv->has_radio = has_radio; /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ if(has_tda9820_tda9821) btv->audio_mode_gpio = lt9415_audio; /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ } static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; static void miro_pinnacle_gpio(struct bttv *btv) { int id,msp,gpio; char *info; gpio_inout(0xffffff, 0); gpio = gpio_read(); id = ((gpio>>10) & 63) -1; msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); if (id < 32) { btv->tuner_type = miro_tunermap[id]; if (0 == (gpio & 0x20)) { btv->has_radio = 1; if (!miro_fmtuner[id]) { btv->has_matchbox = 1; btv->mbox_we = (1<<6); btv->mbox_most = (1<<7); btv->mbox_clk = (1<<8); btv->mbox_data = (1<<9); btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); } } else { btv->has_radio = 0; } if (-1 != msp) { if (btv->c.type == BTTV_BOARD_MIRO) btv->c.type = BTTV_BOARD_MIROPRO; if (btv->c.type == BTTV_BOARD_PINNACLE) btv->c.type = BTTV_BOARD_PINNACLEPRO; } printk(KERN_INFO "bttv%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", btv->c.nr, id+1, btv->tuner_type, !btv->has_radio ? "no" : (btv->has_matchbox ? "matchbox" : "fmtuner"), (-1 == msp) ? "no" : "yes"); } else { /* new cards with microtune tuner */ id = 63 - id; btv->has_radio = 0; switch (id) { case 1: info = "PAL / mono"; btv->tda9887_conf = TDA9887_INTERCARRIER; break; case 2: info = "PAL+SECAM / stereo"; btv->has_radio = 1; btv->tda9887_conf = TDA9887_QSS; break; case 3: info = "NTSC / stereo"; btv->has_radio = 1; btv->tda9887_conf = TDA9887_QSS; break; case 4: info = "PAL+SECAM / mono"; btv->tda9887_conf = TDA9887_QSS; break; case 5: info = "NTSC / mono"; btv->tda9887_conf = TDA9887_INTERCARRIER; break; case 6: info = "NTSC / stereo"; btv->tda9887_conf = TDA9887_INTERCARRIER; break; case 7: info = "PAL / stereo"; btv->tda9887_conf = TDA9887_INTERCARRIER; break; default: info = "oops: unknown card"; break; } if (-1 != msp) btv->c.type = BTTV_BOARD_PINNACLEPRO; printk(KERN_INFO "bttv%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); btv->tuner_type = TUNER_MT2032; } } /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ #define LM1882_SYNC_DRIVE 0x200000L static void init_ids_eagle(struct bttv *btv) { gpio_inout(0xffffff,0xFFFF37); gpio_write(0x200020); /* flash strobe inverter ?! */ gpio_write(0x200024); /* switch sync drive off */ gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); /* set BT848 muxel to 2 */ btaor((2)<<5, ~(2<<5), BT848_IFORM); } /* Muxsel helper for the IDS Eagle. * the eagles does not use the standard muxsel-bits but * has its own multiplexer */ static void eagle_muxsel(struct bttv *btv, unsigned int input) { btaor((2)<<5, ~(3<<5), BT848_IFORM); gpio_bits(3,bttv_tvcards[btv->c.type].muxsel[input&7]); /* composite */ /* set chroma ADC to sleep */ btor(BT848_ADC_C_SLEEP, BT848_ADC); /* set to composite video */ btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); /* switch sync drive off */ gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); } static void gvc1100_muxsel(struct bttv *btv, unsigned int input) { static const int masks[] = {0x30, 0x01, 0x12, 0x23}; gpio_write(masks[input%4]); } /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and alarms output GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | IN - sensor inputs, INx - sensor inputs and TI XORed together O1,O2,O3 - alarm outputs (relays) OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 */ static void init_lmlbt4x(struct bttv *btv) { printk(KERN_DEBUG "LMLBT4x init\n"); btwrite(0x000000, BT848_GPIO_REG_INP); gpio_inout(0xffffff, 0x0006C0); gpio_write(0x000000); } static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) { unsigned int inmux = input % 8; gpio_inout( 0xf, 0xf ); gpio_bits( 0xf, inmux ); } static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) { unsigned int inmux = input % 4; gpio_inout( 3<<9, 3<<9 ); gpio_bits( 3<<9, inmux<<9 ); } static void geovision_muxsel(struct bttv *btv, unsigned int input) { unsigned int inmux = input % 16; gpio_inout(0xf, 0xf); gpio_bits(0xf, inmux); } /* ----------------------------------------------------------------------- */ static void bttv_reset_audio(struct bttv *btv) { /* * BT878A has a audio-reset register. * 1. This register is an audio reset function but it is in * function-0 (video capture) address space. * 2. It is enough to do this once per power-up of the card. * 3. There is a typo in the Conexant doc -- it is not at * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). * --//Shrikumar 030609 */ if (btv->id != 878) return; if (bttv_debug) printk("bttv%d: BT878A ARESET\n",btv->c.nr); btwrite((1<<7), 0x058); udelay(10); btwrite( 0, 0x058); } /* initialization part one -- before registering i2c bus */ void __devinit bttv_init_card1(struct bttv *btv) { switch (btv->c.type) { case BTTV_BOARD_HAUPPAUGE: case BTTV_BOARD_HAUPPAUGE878: boot_msp34xx(btv,5); break; case BTTV_BOARD_VOODOOTV_200: case BTTV_BOARD_VOODOOTV_FM: boot_msp34xx(btv,20); break; case BTTV_BOARD_AVERMEDIA98: boot_msp34xx(btv,11); break; case BTTV_BOARD_HAUPPAUGEPVR: pvr_boot(btv); break; case BTTV_BOARD_TWINHAN_DST: case BTTV_BOARD_AVDVBT_771: case BTTV_BOARD_PINNACLESAT: btv->use_i2c_hw = 1; break; case BTTV_BOARD_ADLINK_RTV24: init_RTV24( btv ); break; } if (!bttv_tvcards[btv->c.type].has_dvb) bttv_reset_audio(btv); } /* initialization part two -- after registering i2c bus */ void __devinit bttv_init_card2(struct bttv *btv) { int addr=ADDR_UNSET; btv->tuner_type = UNSET; if (BTTV_BOARD_UNKNOWN == btv->c.type) { bttv_readee(btv,eeprom_data,0xa0); identify_by_eeprom(btv,eeprom_data); } switch (btv->c.type) { case BTTV_BOARD_MIRO: case BTTV_BOARD_MIROPRO: case BTTV_BOARD_PINNACLE: case BTTV_BOARD_PINNACLEPRO: /* miro/pinnacle */ miro_pinnacle_gpio(btv); break; case BTTV_BOARD_FLYVIDEO_98: case BTTV_BOARD_MAXI: case BTTV_BOARD_LIFE_FLYKIT: case BTTV_BOARD_FLYVIDEO: case BTTV_BOARD_TYPHOON_TVIEW: case BTTV_BOARD_CHRONOS_VS2: case BTTV_BOARD_FLYVIDEO_98FM: case BTTV_BOARD_FLYVIDEO2000: case BTTV_BOARD_FLYVIDEO98EZ: case BTTV_BOARD_CONFERENCETV: case BTTV_BOARD_LIFETEC_9415: flyvideo_gpio(btv); break; case BTTV_BOARD_HAUPPAUGE: case BTTV_BOARD_HAUPPAUGE878: case BTTV_BOARD_HAUPPAUGEPVR: /* pick up some config infos from the eeprom */ bttv_readee(btv,eeprom_data,0xa0); hauppauge_eeprom(btv); break; case BTTV_BOARD_AVERMEDIA98: case BTTV_BOARD_AVPHONE98: bttv_readee(btv,eeprom_data,0xa0); avermedia_eeprom(btv); break; case BTTV_BOARD_PXC200: init_PXC200(btv); break; case BTTV_BOARD_PICOLO_TETRA_CHIP: picolo_tetra_init(btv); break; case BTTV_BOARD_VHX: btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x20; btv->mbox_most = 0; btv->mbox_clk = 0x08; btv->mbox_data = 0x10; btv->mbox_mask = 0x38; break; case BTTV_BOARD_VOBIS_BOOSTAR: case BTTV_BOARD_TERRATV: terratec_active_radio_upgrade(btv); break; case BTTV_BOARD_MAGICTVIEW061: if (btv->cardid == 0x3002144f) { btv->has_radio=1; printk("bttv%d: radio detected by subsystem id (CPH05x)\n",btv->c.nr); } break; case BTTV_BOARD_STB2: if (btv->cardid == 0x3060121a) { /* Fix up entry for 3DFX VoodooTV 100, which is an OEM STB card variant. */ btv->has_radio=0; btv->tuner_type=TUNER_TEMIC_NTSC; } break; case BTTV_BOARD_OSPREY1x0: case BTTV_BOARD_OSPREY1x0_848: case BTTV_BOARD_OSPREY101_848: case BTTV_BOARD_OSPREY1x1: case BTTV_BOARD_OSPREY1x1_SVID: case BTTV_BOARD_OSPREY2xx: case BTTV_BOARD_OSPREY2x0_SVID: case BTTV_BOARD_OSPREY2x0: case BTTV_BOARD_OSPREY440: case BTTV_BOARD_OSPREY500: case BTTV_BOARD_OSPREY540: case BTTV_BOARD_OSPREY2000: bttv_readee(btv,eeprom_data,0xa0); osprey_eeprom(btv, eeprom_data); break; case BTTV_BOARD_IDS_EAGLE: init_ids_eagle(btv); break; case BTTV_BOARD_MODTEC_205: bttv_readee(btv,eeprom_data,0xa0); modtec_eeprom(btv); break; case BTTV_BOARD_LMLBT4: init_lmlbt4x(btv); break; case BTTV_BOARD_TIBET_CS16: tibetCS16_init(btv); break; case BTTV_BOARD_KODICOM_4400R: kodicom4400r_init(btv); break; } /* pll configuration */ if (!(btv->id==848 && btv->revision==0x11)) { /* defaults from card list */ if (PLL_28 == bttv_tvcards[btv->c.type].pll) { btv->pll.pll_ifreq=28636363; btv->pll.pll_crystal=BT848_IFORM_XT0; } if (PLL_35 == bttv_tvcards[btv->c.type].pll) { btv->pll.pll_ifreq=35468950; btv->pll.pll_crystal=BT848_IFORM_XT1; } /* insmod options can override */ switch (pll[btv->c.nr]) { case 0: /* none */ btv->pll.pll_crystal = 0; btv->pll.pll_ifreq = 0; btv->pll.pll_ofreq = 0; break; case 1: /* 28 MHz */ case 28: btv->pll.pll_ifreq = 28636363; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT0; break; case 2: /* 35 MHz */ case 35: btv->pll.pll_ifreq = 35468950; btv->pll.pll_ofreq = 0; btv->pll.pll_crystal = BT848_IFORM_XT1; break; } } btv->pll.pll_current = -1; /* tuner configuration (from card list / autodetect / insmod option) */ if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) addr = bttv_tvcards[btv->c.type].tuner_addr; if (UNSET != bttv_tvcards[btv->c.type].tuner_type) if(UNSET == btv->tuner_type) btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; if (UNSET != tuner[btv->c.nr]) btv->tuner_type = tuner[btv->c.nr]; if (btv->tuner_type == TUNER_ABSENT || bttv_tvcards[btv->c.type].tuner == UNSET) printk(KERN_INFO "bttv%d: tuner absent\n", btv->c.nr); else if(btv->tuner_type == UNSET) printk(KERN_WARNING "bttv%d: tuner type unset\n", btv->c.nr); else printk(KERN_INFO "bttv%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); if (btv->tuner_type != UNSET) { struct tuner_setup tun_setup; tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV; tun_setup.type = btv->tuner_type; tun_setup.addr = addr; bttv_call_i2c_clients(btv, TUNER_SET_TYPE_ADDR, &tun_setup); } if (btv->tda9887_conf) { struct v4l2_priv_tun_config tda9887_cfg; tda9887_cfg.tuner = TUNER_TDA9887; tda9887_cfg.priv = &btv->tda9887_conf; bttv_call_i2c_clients(btv, TUNER_SET_CONFIG, &tda9887_cfg); } btv->svhs = bttv_tvcards[btv->c.type].svhs; if (svhs[btv->c.nr] != UNSET) btv->svhs = svhs[btv->c.nr]; if (remote[btv->c.nr] != UNSET) btv->has_remote = remote[btv->c.nr]; if (bttv_tvcards[btv->c.type].has_radio) btv->has_radio=1; if (bttv_tvcards[btv->c.type].has_remote) btv->has_remote=1; if (!bttv_tvcards[btv->c.type].no_gpioirq) btv->gpioirq=1; if (bttv_tvcards[btv->c.type].volume_gpio) btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio; if (bttv_tvcards[btv->c.type].audio_mode_gpio) btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio; if (bttv_tvcards[btv->c.type].digital_mode == DIGITAL_MODE_CAMERA) { /* detect Bt832 chip for quartzsight digital camera */ if ((bttv_I2CRead(btv, I2C_ADDR_BT832_ALT1, "Bt832") >=0) || (bttv_I2CRead(btv, I2C_ADDR_BT832_ALT2, "Bt832") >=0)) boot_bt832(btv); } if (!autoload) return; if (bttv_tvcards[btv->c.type].tuner == UNSET) return; /* no tuner or related drivers to load */ /* try to detect audio/fader chips */ if (!bttv_tvcards[btv->c.type].no_msp34xx && bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx") >=0) request_module("msp3400"); if (bttv_tvcards[btv->c.type].msp34xx_alt && bttv_I2CRead(btv, I2C_ADDR_MSP3400_ALT, "MSP34xx (alternate address)") >=0) request_module("msp3400"); if (!bttv_tvcards[btv->c.type].no_tda9875 && bttv_I2CRead(btv, I2C_ADDR_TDA9875, "TDA9875") >=0) request_module("tda9875"); if (!bttv_tvcards[btv->c.type].no_tda7432 && bttv_I2CRead(btv, I2C_ADDR_TDA7432, "TDA7432") >=0) request_module("tda7432"); if (bttv_tvcards[btv->c.type].needs_tvaudio) request_module("tvaudio"); if (btv->tuner_type != UNSET && btv->tuner_type != TUNER_ABSENT) request_module("tuner"); } /* ----------------------------------------------------------------------- */ static void modtec_eeprom(struct bttv *btv) { if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", btv->c.nr,&eeprom_data[0x1e]); } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", btv->c.nr,&eeprom_data[0x1e]); } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { btv->tuner_type=TUNER_PHILIPS_NTSC; printk("bttv%d: Modtec: Tuner autodetected by eeprom: %s\n", btv->c.nr,&eeprom_data[0x1e]); } else { printk("bttv%d: Modtec: Unknown TunerString: %s\n", btv->c.nr,&eeprom_data[0x1e]); } } static void __devinit hauppauge_eeprom(struct bttv *btv) { struct tveeprom tv; tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); btv->tuner_type = tv.tuner_type; btv->has_radio = tv.has_radio; printk("bttv%d: Hauppauge eeprom indicates model#%d\n", btv->c.nr, tv.model); /* * Some of the 878 boards have duplicate PCI IDs. Switch the board * type based on model #. */ if(tv.model == 64900) { printk("bttv%d: Switching board type from %s to %s\n", btv->c.nr, bttv_tvcards[btv->c.type].name, bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; } } static int terratec_active_radio_upgrade(struct bttv *btv) { int freq; btv->has_radio = 1; btv->has_matchbox = 1; btv->mbox_we = 0x10; btv->mbox_most = 0x20; btv->mbox_clk = 0x08; btv->mbox_data = 0x04; btv->mbox_mask = 0x3c; btv->mbox_iow = 1 << 8; btv->mbox_ior = 1 << 9; btv->mbox_csel = 1 << 10; freq=88000/62.5; tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ if (0x1ed8 == tea5757_read(btv)) { printk("bttv%d: Terratec Active Radio Upgrade found.\n", btv->c.nr); btv->has_radio = 1; btv->has_matchbox = 1; } else { btv->has_radio = 0; btv->has_matchbox = 0; } return 0; } /* ----------------------------------------------------------------------- */ /* * minimal bootstrap for the WinTV/PVR -- upload altera firmware. * * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be * unpacked with unzip). */ #define PVR_GPIO_DELAY 10 #define BTTV_ALT_DATA 0x000001 #define BTTV_ALT_DCLK 0x100000 #define BTTV_ALT_NCONFIG 0x800000 static int __devinit pvr_altera_load(struct bttv *btv, u8 *micro, u32 microlen) { u32 n; u8 bits; int i; gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); gpio_write(0); udelay(PVR_GPIO_DELAY); gpio_write(BTTV_ALT_NCONFIG); udelay(PVR_GPIO_DELAY); for (n = 0; n < microlen; n++) { bits = micro[n]; for (i = 0 ; i < 8 ; i++) { gpio_bits(BTTV_ALT_DCLK,0); if (bits & 0x01) gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); else gpio_bits(BTTV_ALT_DATA,0); gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); bits >>= 1; } } gpio_bits(BTTV_ALT_DCLK,0); udelay(PVR_GPIO_DELAY); /* begin Altera init loop (Not necessary,but doesn't hurt) */ for (i = 0 ; i < 30 ; i++) { gpio_bits(BTTV_ALT_DCLK,0); gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); } gpio_bits(BTTV_ALT_DCLK,0); return 0; } static int __devinit pvr_boot(struct bttv *btv) { const struct firmware *fw_entry; int rc; rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); if (rc != 0) { printk(KERN_WARNING "bttv%d: no altera firmware [via hotplug]\n", btv->c.nr); return rc; } rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); printk(KERN_INFO "bttv%d: altera firmware upload %s\n", btv->c.nr, (rc < 0) ? "failed" : "ok"); release_firmware(fw_entry); return rc; } /* ----------------------------------------------------------------------- */ /* some osprey specific stuff */ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) { int i; u32 serial = 0; int cardid = -1; /* This code will nevery actually get called in this case.... */ if (btv->c.type == BTTV_BOARD_UNKNOWN) { /* this might be an antique... check for MMAC label in eeprom */ if (!strncmp(ee, "MMAC", 4)) { u8 checksum = 0; for (i = 0; i < 21; i++) checksum += ee[i]; if (checksum != ee[21]) return; cardid = BTTV_BOARD_OSPREY1x0_848; for (i = 12; i < 21; i++) serial *= 10, serial += ee[i] - '0'; } } else { unsigned short type; for (i = 4*16; i < 8*16; i += 16) { u16 checksum = ip_compute_csum(ee + i, 16); if ((checksum&0xff) + (checksum>>8) == 0xff) break; } if (i >= 8*16) return; ee += i; /* found a valid descriptor */ type = be16_to_cpup((u16*)(ee+4)); switch(type) { /* 848 based */ case 0x0004: cardid = BTTV_BOARD_OSPREY1x0_848; break; case 0x0005: cardid = BTTV_BOARD_OSPREY101_848; break; /* 878 based */ case 0x0012: case 0x0013: cardid = BTTV_BOARD_OSPREY1x0; break; case 0x0014: case 0x0015: cardid = BTTV_BOARD_OSPREY1x1; break; case 0x0016: case 0x0017: case 0x0020: cardid = BTTV_BOARD_OSPREY1x1_SVID; break; case 0x0018: case 0x0019: case 0x001E: case 0x001F: cardid = BTTV_BOARD_OSPREY2xx; break; case 0x001A: case 0x001B: cardid = BTTV_BOARD_OSPREY2x0_SVID; break; case 0x0040: cardid = BTTV_BOARD_OSPREY500; break; case 0x0050: case 0x0056: cardid = BTTV_BOARD_OSPREY540; /* bttv_osprey_540_init(btv); */ break; case 0x0060: case 0x0070: case 0x00A0: cardid = BTTV_BOARD_OSPREY2x0; /* enable output on select control lines */ gpio_inout(0xffffff,0x000303); break; case 0x00D8: cardid = BTTV_BOARD_OSPREY440; break; default: /* unknown...leave generic, but get serial # */ printk(KERN_INFO "bttv%d: " "osprey eeprom: unknown card type 0x%04x\n", btv->c.nr, type); break; } serial = be32_to_cpup((u32*)(ee+6)); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", btv->c.nr, cardid, cardid>0 ? bttv_tvcards[cardid].name : "Unknown", serial); if (cardid<0 || btv->c.type == cardid) return; /* card type isn't set correctly */ if (card[btv->c.nr] < bttv_num_tvcards) { printk(KERN_WARNING "bttv%d: osprey eeprom: " "Not overriding user specified card type\n", btv->c.nr); } else { printk(KERN_INFO "bttv%d: osprey eeprom: " "Changing card type from %d to %d\n", btv->c.nr, btv->c.type, cardid); btv->c.type = cardid; } } /* ----------------------------------------------------------------------- */ /* AVermedia specific stuff, from bktr_card.c */ static int tuner_0_table[] = { TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, TUNER_PHILIPS_FM1216ME_MK3 }; static int tuner_1_table[] = { TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; static void __devinit avermedia_eeprom(struct bttv *btv) { int tuner_make,tuner_tv_fm,tuner_format,tuner=0; tuner_make = (eeprom_data[0x41] & 0x7); tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; btv->has_remote = (eeprom_data[0x42] & 0x01); if (tuner_make == 0 || tuner_make == 2) if(tuner_format <=0x0a) tuner = tuner_0_table[tuner_format]; if (tuner_make == 1) if(tuner_format <=9) tuner = tuner_1_table[tuner_format]; if (tuner_make == 4) if(tuner_format == 0x09) tuner = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ printk(KERN_INFO "bttv%d: Avermedia eeprom[0x%02x%02x]: tuner=", btv->c.nr,eeprom_data[0x41],eeprom_data[0x42]); if(tuner) { btv->tuner_type=tuner; printk("%d",tuner); } else printk("Unknown type"); printk(" radio:%s remote control:%s\n", tuner_tv_fm ? "yes" : "no", btv->has_remote ? "yes" : "no"); } /* used on Voodoo TV/FM (Voodoo 200), S0 wired to 0x10000 */ void bttv_tda9880_setnorm(struct bttv *btv, int norm) { /* fix up our card entry */ if(norm==V4L2_STD_NTSC) { bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x957fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x957fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x957fff; dprintk("bttv_tda9880_setnorm to NTSC\n"); } else { bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_FM].gpiomute=0x947fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomux[TVAUDIO_INPUT_TUNER]=0x947fff; bttv_tvcards[BTTV_BOARD_VOODOOTV_200].gpiomute=0x947fff; dprintk("bttv_tda9880_setnorm to PAL\n"); } /* set GPIO according */ gpio_bits(bttv_tvcards[btv->c.type].gpiomask, bttv_tvcards[btv->c.type].gpiomux[btv->audio]); } /* * reset/enable the MSP on some Hauppauge cards * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! * * Hauppauge: pin 5 * Voodoo: pin 20 */ static void __devinit boot_msp34xx(struct bttv *btv, int pin) { int mask = (1 << pin); gpio_inout(mask,mask); gpio_bits(mask,0); udelay(2500); gpio_bits(mask,mask); if (bttv_gpio) bttv_gpio_tracking(btv,"msp34xx"); if (bttv_verbose) printk(KERN_INFO "bttv%d: Hauppauge/Voodoo msp34xx: reset line " "init [%d]\n", btv->c.nr, pin); } static void __devinit boot_bt832(struct bttv *btv) { } /* ----------------------------------------------------------------------- */ /* Imagenation L-Model PXC200 Framegrabber */ /* This is basically the same procedure as * used by Alessandro Rubini in his pxc200 * driver, but using BTTV functions */ static void __devinit init_PXC200(struct bttv *btv) { static int vals[] __devinitdata = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x00 }; unsigned int i; int tmp; u32 val; /* Initialise GPIO-connevted stuff */ gpio_inout(0xffffff, (1<<13)); gpio_write(0); udelay(3); gpio_write(1<<13); /* GPIO inputs are pulled up, so no need to drive * reset pin any longer */ gpio_bits(0xffffff, 0); if (bttv_gpio) bttv_gpio_tracking(btv,"pxc200"); /* we could/should try and reset/control the AD pots? but right now we simply turned off the crushing. Without this the AGC drifts drifts remember the EN is reverse logic --> setting BT848_ADC_AGC_EN disable the AGC tboult@eecs.lehigh.edu */ btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); /* Initialise MAX517 DAC */ printk(KERN_INFO "Setting DAC reference voltage level ...\n"); bttv_I2CWrite(btv,0x5E,0,0x80,1); /* Initialise 12C508 PIC */ /* The I2CWrite and I2CRead commmands are actually to the * same chips - but the R/W bit is included in the address * argument so the numbers are different */ printk(KERN_INFO "Initialising 12C508 PIC chip ...\n"); /* First of all, enable the clock line. This is used in the PXC200-F */ val = btread(BT848_GPIO_DMA_CTL); val |= BT848_GPIO_DMA_CTL_GPCLKMODE; btwrite(val, BT848_GPIO_DMA_CTL); /* Then, push to 0 the reset pin long enough to reset the * * device same as above for the reset line, but not the same * value sent to the GPIO-connected stuff * which one is the good one? */ gpio_inout(0xffffff,(1<<2)); gpio_write(0); udelay(10); gpio_write(1<<2); for (i = 0; i < ARRAY_SIZE(vals); i++) { tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); if (tmp != -1) { printk(KERN_INFO "I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); } } printk(KERN_INFO "PXC200 Initialised.\n"); } /* ----------------------------------------------------------------------- */ /* * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock * it. This apparently involves the following procedure for each 878 chip: * * 1) write 0x00C3FEFF to the GPIO_OUT_EN register * * 2) write to GPIO_DATA * - 0x0E * - sleep 1ms * - 0x10 + 0x0E * - sleep 10ms * - 0x0E * read from GPIO_DATA into buf (uint_32) * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) * error. ERROR_CPLD_Check_Failed stop. * * 3) write to GPIO_DATA * - write 0x4400 + 0x0E * - sleep 10ms * - write 0x4410 + 0x0E * - sleep 1ms * - write 0x0E * read from GPIO_DATA into buf (uint_32) * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) * error. ERROR_CPLD_Check_Failed. */ /* ----------------------------------------------------------------------- */ static void init_RTV24 (struct bttv *btv) { uint32_t dataRead = 0; long watchdog_value = 0x0E; printk (KERN_INFO "bttv%d: Adlink RTV-24 initialisation in progress ...\n", btv->c.nr); btwrite (0x00c3feff, BT848_GPIO_OUT_EN); btwrite (0 + watchdog_value, BT848_GPIO_DATA); msleep (1); btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); msleep (10); btwrite (0 + watchdog_value, BT848_GPIO_DATA); dataRead = btread (BT848_GPIO_DATA); if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { printk (KERN_INFO "bttv%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", btv->c.nr, dataRead); } btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); msleep (10); btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); msleep (1); btwrite (watchdog_value, BT848_GPIO_DATA); msleep (1); dataRead = btread (BT848_GPIO_DATA); if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { printk (KERN_INFO "bttv%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", btv->c.nr, dataRead); return; } printk (KERN_INFO "bttv%d: Adlink RTV-24 initialisation complete.\n", btv->c.nr); } /* ----------------------------------------------------------------------- */ /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ /* * Copyright (c) 1999 Csaba Halasz * This code is placed under the terms of the GNU General Public License * * Brutally hacked by Dan Sheridan djs52 8/3/00 */ static void bus_low(struct bttv *btv, int bit) { if (btv->mbox_ior) { gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); udelay(5); } gpio_bits(bit,0); udelay(5); if (btv->mbox_ior) { gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); udelay(5); } } static void bus_high(struct bttv *btv, int bit) { if (btv->mbox_ior) { gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); udelay(5); } gpio_bits(bit,bit); udelay(5); if (btv->mbox_ior) { gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); udelay(5); } } static int bus_in(struct bttv *btv, int bit) { if (btv->mbox_ior) { gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); udelay(5); gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); udelay(5); } return gpio_read() & (bit); } /* TEA5757 register bits */ #define TEA_FREQ 0:14 #define TEA_BUFFER 15:15 #define TEA_SIGNAL_STRENGTH 16:17 #define TEA_PORT1 18:18 #define TEA_PORT0 19:19 #define TEA_BAND 20:21 #define TEA_BAND_FM 0 #define TEA_BAND_MW 1 #define TEA_BAND_LW 2 #define TEA_BAND_SW 3 #define TEA_MONO 22:22 #define TEA_ALLOW_STEREO 0 #define TEA_FORCE_MONO 1 #define TEA_SEARCH_DIRECTION 23:23 #define TEA_SEARCH_DOWN 0 #define TEA_SEARCH_UP 1 #define TEA_STATUS 24:24 #define TEA_STATUS_TUNED 0 #define TEA_STATUS_SEARCHING 1 /* Low-level stuff */ static int tea5757_read(struct bttv *btv) { unsigned long timeout; int value = 0; int i; /* better safe than sorry */ gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); if (btv->mbox_ior) { gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); udelay(5); } if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 read"); bus_low(btv,btv->mbox_we); bus_low(btv,btv->mbox_clk); udelay(10); timeout= jiffies + msecs_to_jiffies(1000); /* wait for DATA line to go low; error if it doesn't */ while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) schedule(); if (bus_in(btv,btv->mbox_data)) { printk(KERN_WARNING "bttv%d: tea5757: read timeout\n",btv->c.nr); return -1; } dprintk("bttv%d: tea5757:",btv->c.nr); for (i = 0; i < 24; i++) { udelay(5); bus_high(btv,btv->mbox_clk); udelay(5); dprintk("%c",(bus_in(btv,btv->mbox_most) == 0)?'T':'-'); bus_low(btv,btv->mbox_clk); value <<= 1; value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ dprintk("%c", (bus_in(btv,btv->mbox_most) == 0)?'S':'M'); } dprintk("\nbttv%d: tea5757: read 0x%X\n", btv->c.nr, value); return value; } static int tea5757_write(struct bttv *btv, int value) { int i; int reg = value; gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); if (btv->mbox_ior) { gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); udelay(5); } if (bttv_gpio) bttv_gpio_tracking(btv,"tea5757 write"); dprintk("bttv%d: tea5757: write 0x%X\n", btv->c.nr, value); bus_low(btv,btv->mbox_clk); bus_high(btv,btv->mbox_we); for (i = 0; i < 25; i++) { if (reg & 0x1000000) bus_high(btv,btv->mbox_data); else bus_low(btv,btv->mbox_data); reg <<= 1; bus_high(btv,btv->mbox_clk); udelay(10); bus_low(btv,btv->mbox_clk); udelay(10); } bus_low(btv,btv->mbox_we); /* unmute !!! */ return 0; } void tea5757_set_freq(struct bttv *btv, unsigned short freq) { dprintk("tea5757_set_freq %d\n",freq); tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ } /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] * * This is needed because rv605 don't use a normal multiplex, but a crosspoint * switch instead (CD22M3494E). This IC can have multiple active connections * between Xn (input) and Yn (output) pins. We need to clear any existing * connection prior to establish a new one, pulsing the STROBE pin. * * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. * GPIO pins are wired as: * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) * GPIO[8] - - P3[5] (microcontroller) * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) * GPINTR - - P3[4] (microcontroller) * * The microcontroller is a 80C32 like. It should be possible to change xpoint * configuration either directly (as we are doing) or using the microcontroller * which is also wired to I2C interface. I have no further info on the * microcontroller features, one would need to disassembly the firmware. * note: the vendor refused to give any information on this product, all * that stuff was found using a multimeter! :) */ static void rv605_muxsel(struct bttv *btv, unsigned int input) { /* reset all conections */ gpio_bits(0x200,0x200); mdelay(1); gpio_bits(0x200,0x000); mdelay(1); /* create a new connection */ gpio_bits(0x480,0x080); gpio_bits(0x480,0x480); mdelay(1); gpio_bits(0x480,0x080); mdelay(1); } /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] * * The CS16 (available on eBay cheap) is a PCI board with four Fusion * 878A chips, a PCI bridge, an Atmel microcontroller, four sync seperator * chips, ten eight input analog multiplexors, a not chip and a few * other components. * * 16 inputs on a secondary bracket are provided and can be selected * from each of the four capture chips. Two of the eight input * multiplexors are used to select from any of the 16 input signals. * * Unsupported hardware capabilities: * . A video output monitor on the secondary bracket can be selected from * one of the 878A chips. * . Another passthrough but I haven't spent any time investigating it. * . Digital I/O (logic level connected to GPIO) is available from an * onboard header. * * The on chip input mux should always be set to 2. * GPIO[16:19] - Video input selection * GPIO[0:3] - Video output monitor select (only available from one 878A) * GPIO[?:?] - Digital I/O. * * There is an ATMEL microcontroller with an 8031 core on board. I have not * determined what function (if any) it provides. With the microcontroller * and sync seperator chips a guess is that it might have to do with video * switching and maybe some digital I/O. */ static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) { /* video mux */ gpio_bits(0x0f0000, input << 16); } static void tibetCS16_init(struct bttv *btv) { /* enable gpio bits, mask obtained via btSpy */ gpio_inout(0xffffff, 0x0f7fff); gpio_write(0x0f7fff); } /* * The following routines for the Kodicom-4400r get a little mind-twisting. * There is a "master" controller and three "slave" controllers, together * an analog switch which connects any of 16 cameras to any of the BT87A's. * The analog switch is controlled by the "master", but the detection order * of the four BT878A chips is in an order which I just don't understand. * The "master" is actually the second controller to be detected. The * logic on the board uses logical numbers for the 4 controllers, but * those numbers are different from the detection sequence. When working * with the analog switch, we need to "map" from the detection sequence * over to the board's logical controller number. This mapping sequence * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical * unit 3, the second (which is the master) is logical unit 0, etc. * We need to maintain the status of the analog switch (which of the 16 * cameras is connected to which of the 4 controllers). Rather than * add to the bttv structure for this, we use the data reserved for * the mbox (unused for this card type). */ /* * First a routine to set the analog switch, which controls which camera * is routed to which controller. The switch comprises an X-address * (gpio bits 0-3, representing the camera, ranging from 0-15), and a * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). * A data value (gpio bit 7) of '1' enables the switch, and '0' disables * the switch. A STROBE bit (gpio bit 8) latches the data value into the * specified address. The idea is to set the address and data, then bring * STROBE high, and finally bring STROBE back to low. */ static void kodicom4400r_write(struct bttv *btv, unsigned char xaddr, unsigned char yaddr, unsigned char data) { unsigned int udata; udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); gpio_bits(0x1ff, udata); /* write ADDR and DAT */ gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ gpio_bits(0x1ff, udata); /* strobe low */ } /* * Next the mux select. Both the "master" and "slave" 'cards' (controllers) * use this routine. The routine finds the "master" for the card, maps * the controller number from the detected position over to the logical * number, writes the appropriate data to the analog switch, and housekeeps * the local copy of the switch information. The parameter 'input' is the * requested camera number (0 - 15). */ static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) { char *sw_status; int xaddr, yaddr; struct bttv *mctlr; static unsigned char map[4] = {3, 0, 2, 1}; mctlr = master[btv->c.nr]; if (mctlr == NULL) { /* ignore if master not yet detected */ return; } yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ yaddr = map[yaddr]; sw_status = (char *)(&mctlr->mbox_we); xaddr = input & 0xf; /* Check if the controller/camera pair has changed, else ignore */ if (sw_status[yaddr] != xaddr) { /* "open" the old switch, "close" the new one, save the new */ kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); sw_status[yaddr] = xaddr; kodicom4400r_write(mctlr, xaddr, yaddr, 1); } } /* * During initialisation, we need to reset the analog switch. We * also preset the switch to map the 4 connectors on the card to the * *user's* (see above description of kodicom4400r_muxsel) channels * 0 through 3 */ static void kodicom4400r_init(struct bttv *btv) { char *sw_status = (char *)(&btv->mbox_we); int ix; gpio_inout(0x0003ff, 0x0003ff); gpio_write(1 << 9); /* reset MUX */ gpio_write(0); /* Preset camera 0 to the 4 controllers */ for (ix = 0; ix < 4; ix++) { sw_status[ix] = ix; kodicom4400r_write(btv, ix, ix, 1); } /* * Since this is the "master", we need to set up the * other three controller chips' pointers to this structure * for later use in the muxsel routine. */ if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) return; master[btv->c.nr-1] = btv; master[btv->c.nr] = btv; master[btv->c.nr+1] = btv; master[btv->c.nr+2] = btv; } /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel * video multiplexers to provide up to 16 video inputs. These * multiplexers are controlled by the lower 8 GPIO pins of the * bt878. The multiplexers probably Pericom PI5V331Q or similar. * xxx0 is pin xxx of multiplexer U5, * yyy1 is pin yyy of multiplexer U2 */ #define ENA0 0x01 #define ENB0 0x02 #define ENA1 0x04 #define ENB1 0x08 #define IN10 0x10 #define IN00 0x20 #define IN11 0x40 #define IN01 0x80 static void xguard_muxsel(struct bttv *btv, unsigned int input) { static const int masks[] = { ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, }; gpio_write(masks[input%16]); } static void picolo_tetra_init(struct bttv *btv) { /*This is the video input redirection fonctionality : I DID NOT USED IT. */ btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ } static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) { dprintk (KERN_DEBUG "bttv%d : picolo_tetra_muxsel => input = %d\n",btv->c.nr,input); /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ /*GPIO[20]&GPIO[21] used to choose the right input*/ btwrite (input<<20,BT848_GPIO_DATA); } /* * ivc120_muxsel [Added by Alan Garfield ] * * The IVC120G security card has 4 i2c controlled TDA8540 matrix * swichers to provide 16 channels to MUX0. The TDA8540's have * 4 independent outputs and as such the IVC120G also has the * optional "Monitor Out" bus. This allows the card to be looking * at one input while the monitor is looking at another. * * Since I've couldn't be bothered figuring out how to add an * independant muxsel for the monitor bus, I've just set it to * whatever the card is looking at. * * OUT0 of the TDA8540's is connected to MUX0 (0x03) * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) * * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) * */ /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ #define I2C_TDA8540 0x90 #define I2C_TDA8540_ALT1 0x92 #define I2C_TDA8540_ALT2 0x94 #define I2C_TDA8540_ALT3 0x96 #define I2C_TDA8540_ALT4 0x98 #define I2C_TDA8540_ALT5 0x9a #define I2C_TDA8540_ALT6 0x9c static void ivc120_muxsel(struct bttv *btv, unsigned int input) { /* Simple maths */ int key = input % 4; int matrix = input / 4; dprintk("bttv%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", btv->c.nr, input, matrix, key); /* Handles the input selection on the TDA8540's */ bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, ((matrix == 3) ? (key | key << 2) : 0x00), 1); bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, ((matrix == 0) ? (key | key << 2) : 0x00), 1); bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, ((matrix == 1) ? (key | key << 2) : 0x00), 1); bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, ((matrix == 2) ? (key | key << 2) : 0x00), 1); /* Handles the output enables on the TDA8540's */ bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ /* Selects MUX0 for input on the 878 */ btaor((0)<<5, ~(3<<5), BT848_IFORM); } /* PXC200 muxsel helper * luke@syseng.anu.edu.au * another transplant * from Alessandro Rubini (rubini@linux.it) * * There are 4 kinds of cards: * PXC200L which is bt848 * PXC200F which is bt848 with PIC controlling mux * PXC200AL which is bt878 * PXC200AF which is bt878 with PIC controlling mux */ #define PX_CFG_PXC200F 0x01 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ #define PX_I2C_PIC 0x0f #define PX_PXC200A_CARDID 0x200a1295 #define PX_I2C_CMD_CFG 0x00 static void PXC200_muxsel(struct bttv *btv, unsigned int input) { int rc; long mux; int bitmask; unsigned char buf[2]; /* Read PIC config to determine if this is a PXC200F */ /* PX_I2C_CMD_CFG*/ buf[0]=0; buf[1]=0; rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); if (rc) { printk(KERN_DEBUG "bttv%d: PXC200_muxsel: pic cfg write failed:%d\n", btv->c.nr,rc); /* not PXC ? do nothing */ return; } rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); if (!(rc & PX_CFG_PXC200F)) { printk(KERN_DEBUG "bttv%d: PXC200_muxsel: not PXC200F rc:%d \n", btv->c.nr,rc); return; } /* The multiplexer in the 200F is handled by the GPIO port */ /* get correct mapping between inputs */ /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ /* ** not needed!? */ mux = input; /* make sure output pins are enabled */ /* bitmask=0x30f; */ bitmask=0x302; /* check whether we have a PXC200A */ if (btv->cardid == PX_PXC200A_CARDID) { bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ bitmask |= 7<<4; /* the DAC */ } btwrite(bitmask, BT848_GPIO_OUT_EN); bitmask = btread(BT848_GPIO_DATA); if (btv->cardid == PX_PXC200A_CARDID) bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); else /* older device */ bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); btwrite(bitmask,BT848_GPIO_DATA); /* * Was "to be safe, set the bt848 to input 0" * Actually, since it's ok at load time, better not messing * with these bits (on PXC200AF you need to set mux 2 here) * * needed because bttv-driver sets mux before calling this function */ if (btv->cardid == PX_PXC200A_CARDID) btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); else /* older device */ btand(~BT848_IFORM_MUXSEL,BT848_IFORM); printk(KERN_DEBUG "bttv%d: setting input channel to:%d\n", btv->c.nr,(int)mux); } /* ----------------------------------------------------------------------- */ /* motherboard chipset specific stuff */ void __init bttv_check_chipset(void) { int pcipci_fail = 0; struct pci_dev *dev = NULL; if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ pcipci_fail = 1; if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) triton1 = 1; if (pci_pci_problems & PCIPCI_VSFX) vsfx = 1; #ifdef PCIPCI_ALIMAGIK if (pci_pci_problems & PCIPCI_ALIMAGIK) latency = 0x0A; #endif /* print warnings about any quirks found */ if (triton1) printk(KERN_INFO "bttv: Host bridge needs ETBF enabled.\n"); if (vsfx) printk(KERN_INFO "bttv: Host bridge needs VSFX enabled.\n"); if (pcipci_fail) { printk(KERN_INFO "bttv: bttv and your chipset may not work " "together.\n"); if (!no_overlay) { printk(KERN_INFO "bttv: overlay will be disabled.\n"); no_overlay = 1; } else { printk(KERN_INFO "bttv: overlay forced. Use this " "option at your own risk.\n"); } } if (UNSET != latency) printk(KERN_INFO "bttv: pci latency fixup [%d]\n",latency); while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82441, dev))) { unsigned char b; pci_read_config_byte(dev, 0x53, &b); if (bttv_debug) printk(KERN_INFO "bttv: Host bridge: 82441FX Natoma, " "bufcon=0x%02x\n",b); } } int __devinit bttv_handle_chipset(struct bttv *btv) { unsigned char command; if (!triton1 && !vsfx && UNSET == latency) return 0; if (bttv_verbose) { if (triton1) printk(KERN_INFO "bttv%d: enabling ETBF (430FX/VP3 compatibilty)\n",btv->c.nr); if (vsfx && btv->id >= 878) printk(KERN_INFO "bttv%d: enabling VSFX\n",btv->c.nr); if (UNSET != latency) printk(KERN_INFO "bttv%d: setting pci timer to %d\n", btv->c.nr,latency); } if (btv->id < 878) { /* bt848 (mis)uses a bit in the irq mask for etbf */ if (triton1) btv->triton1 = BT848_INT_ETBF; } else { /* bt878 has a bit in the pci config space for it */ pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); if (triton1) command |= BT878_EN_TBFX; if (vsfx) command |= BT878_EN_VSFX; pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); } if (UNSET != latency) pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); return 0; } /* * Local variables: * c-basic-offset: 8 * End: */