/* * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver * * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #define MMCIPOWER 0x000 #define MCI_PWR_OFF 0x00 #define MCI_PWR_UP 0x02 #define MCI_PWR_ON 0x03 #define MCI_OD (1 << 6) #define MCI_ROD (1 << 7) /* * The ST Micro version does not have ROD and reuse the voltage registers * for direction settings */ #define MCI_ST_DATA2DIREN (1 << 2) #define MCI_ST_CMDDIREN (1 << 3) #define MCI_ST_DATA0DIREN (1 << 4) #define MCI_ST_DATA31DIREN (1 << 5) #define MCI_ST_FBCLKEN (1 << 7) #define MCI_ST_DATA74DIREN (1 << 8) #define MMCICLOCK 0x004 #define MCI_CLK_ENABLE (1 << 8) #define MCI_CLK_PWRSAVE (1 << 9) #define MCI_CLK_BYPASS (1 << 10) #define MCI_4BIT_BUS (1 << 11) /* * 8bit wide buses, hardware flow contronl, negative edges and clock inversion * supported in ST Micro U300 and Ux500 versions */ #define MCI_ST_8BIT_BUS (1 << 12) #define MCI_ST_U300_HWFCEN (1 << 13) #define MCI_ST_UX500_NEG_EDGE (1 << 13) #define MCI_ST_UX500_HWFCEN (1 << 14) #define MCI_ST_UX500_CLK_INV (1 << 15) #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c #define MCI_CPSM_RESPONSE (1 << 6) #define MCI_CPSM_LONGRSP (1 << 7) #define MCI_CPSM_INTERRUPT (1 << 8) #define MCI_CPSM_PENDING (1 << 9) #define MCI_CPSM_ENABLE (1 << 10) #define MCI_SDIO_SUSP (1 << 11) #define MCI_ENCMD_COMPL (1 << 12) #define MCI_NIEN (1 << 13) #define MCI_CE_ATACMD (1 << 14) #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 #define MMCIRESPONSE1 0x018 #define MMCIRESPONSE2 0x01c #define MMCIRESPONSE3 0x020 #define MMCIDATATIMER 0x024 #define MMCIDATALENGTH 0x028 #define MMCIDATACTRL 0x02c #define MCI_DPSM_ENABLE (1 << 0) #define MCI_DPSM_DIRECTION (1 << 1) #define MCI_DPSM_MODE (1 << 2) #define MCI_DPSM_DMAENABLE (1 << 3) #define MCI_DPSM_BLOCKSIZE (1 << 4) /* Control register extensions in the ST Micro U300 and Ux500 versions */ #define MCI_ST_DPSM_RWSTART (1 << 8) #define MCI_ST_DPSM_RWSTOP (1 << 9) #define MCI_ST_DPSM_RWMOD (1 << 10) #define MCI_ST_DPSM_SDIOEN (1 << 11) /* Control register extensions in the ST Micro Ux500 versions */ #define MCI_ST_DPSM_DMAREQCTL (1 << 12) #define MCI_ST_DPSM_DBOOTMODEEN (1 << 13) #define MCI_ST_DPSM_BUSYMODE (1 << 14) #define MCI_ST_DPSM_DDRMODE (1 << 15) #define MMCIDATACNT 0x030 #define MMCISTATUS 0x034 #define MCI_CMDCRCFAIL (1 << 0) #define MCI_DATACRCFAIL (1 << 1) #define MCI_CMDTIMEOUT (1 << 2) #define MCI_DATATIMEOUT (1 << 3) #define MCI_TXUNDERRUN (1 << 4) #define MCI_RXOVERRUN (1 << 5) #define MCI_CMDRESPEND (1 << 6) #define MCI_CMDSENT (1 << 7) #define MCI_DATAEND (1 << 8) #define MCI_STARTBITERR (1 << 9) #define MCI_DATABLOCKEND (1 << 10) #define MCI_CMDACTIVE (1 << 11) #define MCI_TXACTIVE (1 << 12) #define MCI_RXACTIVE (1 << 13) #define MCI_TXFIFOHALFEMPTY (1 << 14) #define MCI_RXFIFOHALFFULL (1 << 15) #define MCI_TXFIFOFULL (1 << 16) #define MCI_RXFIFOFULL (1 << 17) #define MCI_TXFIFOEMPTY (1 << 18) #define MCI_RXFIFOEMPTY (1 << 19) #define MCI_TXDATAAVLBL (1 << 20) #define MCI_RXDATAAVLBL (1 << 21) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOIT (1 << 22) #define MCI_ST_CEATAEND (1 << 23) #define MMCICLEAR 0x038 #define MCI_CMDCRCFAILCLR (1 << 0) #define MCI_DATACRCFAILCLR (1 << 1) #define MCI_CMDTIMEOUTCLR (1 << 2) #define MCI_DATATIMEOUTCLR (1 << 3) #define MCI_TXUNDERRUNCLR (1 << 4) #define MCI_RXOVERRUNCLR (1 << 5) #define MCI_CMDRESPENDCLR (1 << 6) #define MCI_CMDSENTCLR (1 << 7) #define MCI_DATAENDCLR (1 << 8) #define MCI_STARTBITERRCLR (1 << 9) #define MCI_DATABLOCKENDCLR (1 << 10) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOITC (1 << 22) #define MCI_ST_CEATAENDC (1 << 23) #define MMCIMASK0 0x03c #define MCI_CMDCRCFAILMASK (1 << 0) #define MCI_DATACRCFAILMASK (1 << 1) #define MCI_CMDTIMEOUTMASK (1 << 2) #define MCI_DATATIMEOUTMASK (1 << 3) #define MCI_TXUNDERRUNMASK (1 << 4) #define MCI_RXOVERRUNMASK (1 << 5) #define MCI_CMDRESPENDMASK (1 << 6) #define MCI_CMDSENTMASK (1 << 7) #define MCI_DATAENDMASK (1 << 8) #define MCI_STARTBITERRMASK (1 << 9) #define MCI_DATABLOCKENDMASK (1 << 10) #define MCI_CMDACTIVEMASK (1 << 11) #define MCI_TXACTIVEMASK (1 << 12) #define MCI_RXACTIVEMASK (1 << 13) #define MCI_TXFIFOHALFEMPTYMASK (1 << 14) #define MCI_RXFIFOHALFFULLMASK (1 << 15) #define MCI_TXFIFOFULLMASK (1 << 16) #define MCI_RXFIFOFULLMASK (1 << 17) #define MCI_TXFIFOEMPTYMASK (1 << 18) #define MCI_RXFIFOEMPTYMASK (1 << 19) #define MCI_TXDATAAVLBLMASK (1 << 20) #define MCI_RXDATAAVLBLMASK (1 << 21) /* Extended status bits for the ST Micro variants */ #define MCI_ST_SDIOITMASK (1 << 22) #define MCI_ST_CEATAENDMASK (1 << 23) #define MMCIMASK1 0x040 #define MMCIFIFOCNT 0x048 #define MMCIFIFO 0x080 /* to 0x0bc */ #define MCI_IRQENABLE \ (MCI_CMDCRCFAILMASK|MCI_DATACRCFAILMASK|MCI_CMDTIMEOUTMASK| \ MCI_DATATIMEOUTMASK|MCI_TXUNDERRUNMASK|MCI_RXOVERRUNMASK| \ MCI_CMDRESPENDMASK|MCI_CMDSENTMASK|MCI_STARTBITERRMASK) /* These interrupts are directed to IRQ1 when two IRQ lines are available */ #define MCI_IRQ1MASK \ (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \ MCI_TXFIFOHALFEMPTYMASK) #define NR_SG 128 struct clk; struct variant_data; struct dma_chan; struct mmci_host_next { struct dma_async_tx_descriptor *dma_desc; struct dma_chan *dma_chan; s32 cookie; }; struct mmci_host { phys_addr_t phybase; void __iomem *base; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; struct mmc_host *mmc; struct clk *clk; int gpio_cd; int gpio_wp; int gpio_cd_irq; bool singleirq; spinlock_t lock; unsigned int mclk; unsigned int cclk; u32 pwr; struct mmci_platform_data *plat; struct variant_data *variant; u8 hw_designer; u8 hw_revision:4; struct timer_list timer; unsigned int oldstat; /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; struct regulator *vcc; #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ struct dma_chan *dma_current; struct dma_chan *dma_rx_channel; struct dma_chan *dma_tx_channel; struct dma_async_tx_descriptor *dma_desc_current; struct mmci_host_next next_data; #define dma_inprogress(host) ((host)->dma_current) #else #define dma_inprogress(host) (0) #endif };