/* * drivers/input/tablet/wacom_wac.c * * USB Wacom tablet support - Wacom specific code * */ /* * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #include "wacom_wac.h" #include "wacom.h" #include /* resolution for penabled devices */ #define WACOM_PL_RES 20 #define WACOM_PENPRTN_RES 40 #define WACOM_VOLITO_RES 50 #define WACOM_GRAPHIRE_RES 80 #define WACOM_INTUOS_RES 100 #define WACOM_INTUOS3_RES 200 /* Newer Cintiq and DTU have an offset between tablet and screen areas */ #define WACOM_DTU_OFFSET 200 #define WACOM_CINTIQ_OFFSET 400 /* * Scale factor relating reported contact size to logical contact area. * 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo */ #define WACOM_CONTACT_AREA_SCALE 2607 /* * Percent of battery capacity for Graphire. * 8th value means AC online and show 100% capacity. */ static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; /* * Percent of battery capacity for Intuos4 WL, AC has a separate bit. */ static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 }; static void wacom_notify_battery(struct wacom_wac *wacom_wac, int bat_capacity, bool bat_charging, bool bat_connected, bool ps_connected) { struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); bool changed = wacom_wac->battery_capacity != bat_capacity || wacom_wac->bat_charging != bat_charging || wacom_wac->bat_connected != bat_connected || wacom_wac->ps_connected != ps_connected; if (changed) { wacom_wac->battery_capacity = bat_capacity; wacom_wac->bat_charging = bat_charging; wacom_wac->bat_connected = bat_connected; wacom_wac->ps_connected = ps_connected; if (wacom->battery.dev) power_supply_changed(&wacom->battery); } } static int wacom_penpartner_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; struct input_dev *input = wacom->input; switch (data[0]) { case 1: if (data[5] & 0x80) { wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID; input_report_key(input, wacom->tool[0], 1); input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127)); input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); } else { input_report_key(input, wacom->tool[0], 0); input_report_abs(input, ABS_MISC, 0); /* report tool id */ input_report_abs(input, ABS_PRESSURE, -1); input_report_key(input, BTN_TOUCH, 0); } break; case 2: input_report_key(input, BTN_TOOL_PEN, 1); input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */ input_report_abs(input, ABS_X, get_unaligned_le16(&data[1])); input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3])); input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127); input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20)); input_report_key(input, BTN_STYLUS, (data[5] & 0x40)); break; default: dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); return 0; } return 1; } static int wacom_pl_irq(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; int prox, pressure; if (data[0] != WACOM_REPORT_PENABLED) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); return 0; } prox = data[1] & 0x40; if (prox) { wacom->id[0] = ERASER_DEVICE_ID; pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1)); if (features->pressure_max > 255) pressure = (pressure << 1) | ((data[4] >> 6) & 1); pressure += (features->pressure_max + 1) / 2; /* * if going from out of proximity into proximity select between the eraser * and the pen based on the state of the stylus2 button, choose eraser if * pressed else choose pen. if not a proximity change from out to in, send * an out of proximity for previous tool then a in for new tool. */ if (!wacom->tool[0]) { /* Eraser bit set for DTF */ if (data[1] & 0x10) wacom->tool[1] = BTN_TOOL_RUBBER; else /* Going into proximity select tool */ wacom->tool[1] = (data[4] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; } else { /* was entered with stylus2 pressed */ if (wacom->tool[1] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) { /* report out proximity for previous tool */ input_report_key(input, wacom->tool[1], 0); input_sync(input); wacom->tool[1] = BTN_TOOL_PEN; return 0; } } if (wacom->tool[1] != BTN_TOOL_RUBBER) { /* Unknown tool selected default to pen tool */ wacom->tool[1] = BTN_TOOL_PEN; wacom->id[0] = STYLUS_DEVICE_ID; } input_report_key(input, wacom->tool[1], prox); /* report in proximity for tool */ input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14)); input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14)); input_report_abs(input, ABS_PRESSURE, pressure); input_report_key(input, BTN_TOUCH, data[4] & 0x08); input_report_key(input, BTN_STYLUS, data[4] & 0x10); /* Only allow the stylus2 button to be reported for the pen tool. */ input_report_key(input, BTN_STYLUS2, (wacom->tool[1] == BTN_TOOL_PEN) && (data[4] & 0x20)); } else { /* report proximity-out of a (valid) tool */ if (wacom->tool[1] != BTN_TOOL_RUBBER) { /* Unknown tool selected default to pen tool */ wacom->tool[1] = BTN_TOOL_PEN; } input_report_key(input, wacom->tool[1], prox); } wacom->tool[0] = prox; /* Save proximity state */ return 1; } static int wacom_ptu_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; struct input_dev *input = wacom->input; if (data[0] != WACOM_REPORT_PENABLED) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); return 0; } if (data[1] & 0x04) { input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20); input_report_key(input, BTN_TOUCH, data[1] & 0x08); wacom->id[0] = ERASER_DEVICE_ID; } else { input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20); input_report_key(input, BTN_TOUCH, data[1] & 0x01); wacom->id[0] = STYLUS_DEVICE_ID; } input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6])); input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x10); return 1; } static int wacom_dtu_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; struct input_dev *input = wacom->input; int prox = data[1] & 0x20; dev_dbg(input->dev.parent, "%s: received report #%d", __func__, data[0]); if (prox) { /* Going into proximity select tool */ wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; if (wacom->tool[0] == BTN_TOOL_PEN) wacom->id[0] = STYLUS_DEVICE_ID; else wacom->id[0] = ERASER_DEVICE_ID; } input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); if (!prox) /* out-prox */ wacom->id[0] = 0; input_report_key(input, wacom->tool[0], prox); input_report_abs(input, ABS_MISC, wacom->id[0]); return 1; } static int wacom_dtus_irq(struct wacom_wac *wacom) { char *data = wacom->data; struct input_dev *input = wacom->input; unsigned short prox, pressure = 0; if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) { dev_dbg(input->dev.parent, "%s: received unknown report #%d", __func__, data[0]); return 0; } else if (data[0] == WACOM_REPORT_DTUSPAD) { input = wacom->pad_input; input_report_key(input, BTN_0, (data[1] & 0x01)); input_report_key(input, BTN_1, (data[1] & 0x02)); input_report_key(input, BTN_2, (data[1] & 0x04)); input_report_key(input, BTN_3, (data[1] & 0x08)); input_report_abs(input, ABS_MISC, data[1] & 0x0f ? PAD_DEVICE_ID : 0); return 1; } else { prox = data[1] & 0x80; if (prox) { switch ((data[1] >> 3) & 3) { case 1: /* Rubber */ wacom->tool[0] = BTN_TOOL_RUBBER; wacom->id[0] = ERASER_DEVICE_ID; break; case 2: /* Pen */ wacom->tool[0] = BTN_TOOL_PEN; wacom->id[0] = STYLUS_DEVICE_ID; break; } } input_report_key(input, BTN_STYLUS, data[1] & 0x20); input_report_key(input, BTN_STYLUS2, data[1] & 0x40); input_report_abs(input, ABS_X, get_unaligned_be16(&data[3])); input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5])); pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff); input_report_abs(input, ABS_PRESSURE, pressure); input_report_key(input, BTN_TOUCH, pressure > 10); if (!prox) /* out-prox */ wacom->id[0] = 0; input_report_key(input, wacom->tool[0], prox); input_report_abs(input, ABS_MISC, wacom->id[0]); return 1; } } static int wacom_graphire_irq(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; struct input_dev *pad_input = wacom->pad_input; int battery_capacity, ps_connected; int prox; int rw = 0; int retval = 0; if (features->type == GRAPHIRE_BT) { if (data[0] != WACOM_REPORT_PENABLED_BT) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); goto exit; } } else if (data[0] != WACOM_REPORT_PENABLED) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); goto exit; } prox = data[1] & 0x80; if (prox || wacom->id[0]) { if (prox) { switch ((data[1] >> 5) & 3) { case 0: /* Pen */ wacom->tool[0] = BTN_TOOL_PEN; wacom->id[0] = STYLUS_DEVICE_ID; break; case 1: /* Rubber */ wacom->tool[0] = BTN_TOOL_RUBBER; wacom->id[0] = ERASER_DEVICE_ID; break; case 2: /* Mouse with wheel */ input_report_key(input, BTN_MIDDLE, data[1] & 0x04); /* fall through */ case 3: /* Mouse without wheel */ wacom->tool[0] = BTN_TOOL_MOUSE; wacom->id[0] = CURSOR_DEVICE_ID; break; } } input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); if (wacom->tool[0] != BTN_TOOL_MOUSE) { if (features->type == GRAPHIRE_BT) input_report_abs(input, ABS_PRESSURE, data[6] | (((__u16) (data[1] & 0x08)) << 5)); else input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); input_report_key(input, BTN_TOUCH, data[1] & 0x01); input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x04); } else { input_report_key(input, BTN_LEFT, data[1] & 0x01); input_report_key(input, BTN_RIGHT, data[1] & 0x02); if (features->type == WACOM_G4 || features->type == WACOM_MO) { input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); rw = (data[7] & 0x04) - (data[7] & 0x03); } else if (features->type == GRAPHIRE_BT) { /* Compute distance between mouse and tablet */ rw = 44 - (data[6] >> 2); rw = clamp_val(rw, 0, 31); input_report_abs(input, ABS_DISTANCE, rw); if (((data[1] >> 5) & 3) == 2) { /* Mouse with wheel */ input_report_key(input, BTN_MIDDLE, data[1] & 0x04); rw = (data[6] & 0x01) ? -1 : (data[6] & 0x02) ? 1 : 0; } else { rw = 0; } } else { input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); rw = -(signed char)data[6]; } input_report_rel(input, REL_WHEEL, rw); } if (!prox) wacom->id[0] = 0; input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */ input_report_key(input, wacom->tool[0], prox); input_sync(input); /* sync last event */ } /* send pad data */ switch (features->type) { case WACOM_G4: prox = data[7] & 0xf8; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; input_report_key(pad_input, BTN_BACK, (data[7] & 0x40)); input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80)); rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3); input_report_rel(pad_input, REL_WHEEL, rw); if (!prox) wacom->id[1] = 0; input_report_abs(pad_input, ABS_MISC, wacom->id[1]); retval = 1; } break; case WACOM_MO: prox = (data[7] & 0xf8) || data[8]; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; input_report_key(pad_input, BTN_BACK, (data[7] & 0x08)); input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20)); input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10)); input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40)); input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f)); if (!prox) wacom->id[1] = 0; input_report_abs(pad_input, ABS_MISC, wacom->id[1]); retval = 1; } break; case GRAPHIRE_BT: prox = data[7] & 0x03; if (prox || wacom->id[1]) { wacom->id[1] = PAD_DEVICE_ID; input_report_key(pad_input, BTN_0, (data[7] & 0x02)); input_report_key(pad_input, BTN_1, (data[7] & 0x01)); if (!prox) wacom->id[1] = 0; input_report_abs(pad_input, ABS_MISC, wacom->id[1]); retval = 1; } break; } /* Store current battery capacity and power supply state */ if (features->type == GRAPHIRE_BT) { rw = (data[7] >> 2 & 0x07); battery_capacity = batcap_gr[rw]; ps_connected = rw == 7; wacom_notify_battery(wacom, battery_capacity, ps_connected, 1, ps_connected); } exit: return retval; } static void wacom_intuos_schedule_prox_event(struct wacom_wac *wacom_wac) { struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); struct hid_report *r; struct hid_report_enum *re; re = &(wacom->hdev->report_enum[HID_FEATURE_REPORT]); r = re->report_id_hash[WACOM_REPORT_INTUOSREAD]; if (r) { hid_hw_request(wacom->hdev, r, HID_REQ_GET_REPORT); } } static int wacom_intuos_inout(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; int idx = 0; /* tool number */ if (features->type == INTUOS) idx = data[1] & 0x01; /* Enter report */ if ((data[1] & 0xfc) == 0xc0) { /* serial number of the tool */ wacom->serial[idx] = ((data[3] & 0x0f) << 28) + (data[4] << 20) + (data[5] << 12) + (data[6] << 4) + (data[7] >> 4); wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) | ((data[7] & 0x0f) << 20) | ((data[8] & 0xf0) << 12); switch (wacom->id[idx]) { case 0x812: /* Inking pen */ case 0x801: /* Intuos3 Inking pen */ case 0x120802: /* Intuos4/5 Inking Pen */ case 0x012: wacom->tool[idx] = BTN_TOOL_PENCIL; break; case 0x822: /* Pen */ case 0x842: case 0x852: case 0x823: /* Intuos3 Grip Pen */ case 0x813: /* Intuos3 Classic Pen */ case 0x885: /* Intuos3 Marker Pen */ case 0x802: /* Intuos4/5 13HD/24HD General Pen */ case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */ case 0x022: case 0x100804: /* Intuos4/5 13HD/24HD Art Pen */ case 0x140802: /* Intuos4/5 13HD/24HD Classic Pen */ case 0x160802: /* Cintiq 13HD Pro Pen */ case 0x180802: /* DTH2242 Pen */ case 0x100802: /* Intuos4/5 13HD/24HD General Pen */ wacom->tool[idx] = BTN_TOOL_PEN; break; case 0x832: /* Stroke pen */ case 0x032: wacom->tool[idx] = BTN_TOOL_BRUSH; break; case 0x007: /* Mouse 4D and 2D */ case 0x09c: case 0x094: case 0x017: /* Intuos3 2D Mouse */ case 0x806: /* Intuos4 Mouse */ wacom->tool[idx] = BTN_TOOL_MOUSE; break; case 0x096: /* Lens cursor */ case 0x097: /* Intuos3 Lens cursor */ case 0x006: /* Intuos4 Lens cursor */ wacom->tool[idx] = BTN_TOOL_LENS; break; case 0x82a: /* Eraser */ case 0x85a: case 0x91a: case 0xd1a: case 0x0fa: case 0x82b: /* Intuos3 Grip Pen Eraser */ case 0x81b: /* Intuos3 Classic Pen Eraser */ case 0x91b: /* Intuos3 Airbrush Eraser */ case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */ case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */ case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ case 0x14080a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */ case 0x10090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */ case 0x10080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */ case 0x16080a: /* Cintiq 13HD Pro Pen Eraser */ case 0x18080a: /* DTH2242 Eraser */ case 0x10080a: /* Intuos4/5 13HD/24HD General Pen Eraser */ wacom->tool[idx] = BTN_TOOL_RUBBER; break; case 0xd12: case 0x912: case 0x112: case 0x913: /* Intuos3 Airbrush */ case 0x902: /* Intuos4/5 13HD/24HD Airbrush */ case 0x100902: /* Intuos4/5 13HD/24HD Airbrush */ wacom->tool[idx] = BTN_TOOL_AIRBRUSH; break; default: /* Unknown tool */ wacom->tool[idx] = BTN_TOOL_PEN; break; } return 1; } /* * don't report events for invalid data */ /* older I4 styli don't work with new Cintiqs */ if ((!((wacom->id[idx] >> 20) & 0x01) && (features->type == WACOM_21UX2)) || /* Only large Intuos support Lense Cursor */ (wacom->tool[idx] == BTN_TOOL_LENS && (features->type == INTUOS3 || features->type == INTUOS3S || features->type == INTUOS4 || features->type == INTUOS4S || features->type == INTUOS5 || features->type == INTUOS5S || features->type == INTUOSPM || features->type == INTUOSPS)) || /* Cintiq doesn't send data when RDY bit isn't set */ (features->type == CINTIQ && !(data[1] & 0x40))) return 1; wacom->shared->stylus_in_proximity = true; if (wacom->shared->touch_down) return 1; /* in Range while exiting */ if (((data[1] & 0xfe) == 0x20) && wacom->reporting_data) { input_report_key(input, BTN_TOUCH, 0); input_report_abs(input, ABS_PRESSURE, 0); input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max); return 2; } /* Exit report */ if ((data[1] & 0xfe) == 0x80) { wacom->shared->stylus_in_proximity = false; wacom->reporting_data = false; /* don't report exit if we don't know the ID */ if (!wacom->id[idx]) return 1; /* * Reset all states otherwise we lose the initial states * when in-prox next time */ input_report_abs(input, ABS_X, 0); input_report_abs(input, ABS_Y, 0); input_report_abs(input, ABS_DISTANCE, 0); input_report_abs(input, ABS_TILT_X, 0); input_report_abs(input, ABS_TILT_Y, 0); if (wacom->tool[idx] >= BTN_TOOL_MOUSE) { input_report_key(input, BTN_LEFT, 0); input_report_key(input, BTN_MIDDLE, 0); input_report_key(input, BTN_RIGHT, 0); input_report_key(input, BTN_SIDE, 0); input_report_key(input, BTN_EXTRA, 0); input_report_abs(input, ABS_THROTTLE, 0); input_report_abs(input, ABS_RZ, 0); } else { input_report_abs(input, ABS_PRESSURE, 0); input_report_key(input, BTN_STYLUS, 0); input_report_key(input, BTN_STYLUS2, 0); input_report_key(input, BTN_TOUCH, 0); input_report_abs(input, ABS_WHEEL, 0); if (features->type >= INTUOS3S) input_report_abs(input, ABS_Z, 0); } input_report_key(input, wacom->tool[idx], 0); input_report_abs(input, ABS_MISC, 0); /* reset tool id */ input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); wacom->id[idx] = 0; return 2; } /* don't report other events if we don't know the ID */ if (!wacom->id[idx]) { /* but reschedule a read of the current tool */ wacom_intuos_schedule_prox_event(wacom); return 1; } return 0; } static void wacom_intuos_general(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; unsigned int t; /* general pen packet */ if ((data[1] & 0xb8) == 0xa0) { t = (data[6] << 2) | ((data[7] >> 6) & 3); if (features->type >= INTUOS4S && features->type <= CINTIQ_HYBRID) { t = (t << 1) | (data[1] & 1); } input_report_abs(input, ABS_PRESSURE, t); input_report_abs(input, ABS_TILT_X, (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64); input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64); input_report_key(input, BTN_STYLUS, data[1] & 2); input_report_key(input, BTN_STYLUS2, data[1] & 4); input_report_key(input, BTN_TOUCH, t > 10); } /* airbrush second packet */ if ((data[1] & 0xbc) == 0xb4) { input_report_abs(input, ABS_WHEEL, (data[6] << 2) | ((data[7] >> 6) & 3)); input_report_abs(input, ABS_TILT_X, (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64); input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64); } } static int wacom_intuos_irq(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; unsigned char *data = wacom->data; struct input_dev *input = wacom->input; unsigned int t; int idx = 0, result; if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_INTUOSREAD && data[0] != WACOM_REPORT_INTUOSWRITE && data[0] != WACOM_REPORT_INTUOSPAD && data[0] != WACOM_REPORT_CINTIQ && data[0] != WACOM_REPORT_CINTIQPAD && data[0] != WACOM_REPORT_INTUOS5PAD) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); return 0; } /* tool number */ if (features->type == INTUOS) idx = data[1] & 0x01; /* pad packets. Works as a second tool and is always in prox */ if (data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD || data[0] == WACOM_REPORT_CINTIQPAD) { input = wacom->pad_input; if (features->type >= INTUOS4S && features->type <= INTUOS4L) { input_report_key(input, BTN_0, (data[2] & 0x01)); input_report_key(input, BTN_1, (data[3] & 0x01)); input_report_key(input, BTN_2, (data[3] & 0x02)); input_report_key(input, BTN_3, (data[3] & 0x04)); input_report_key(input, BTN_4, (data[3] & 0x08)); input_report_key(input, BTN_5, (data[3] & 0x10)); input_report_key(input, BTN_6, (data[3] & 0x20)); if (data[1] & 0x80) { input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); } else { /* Out of proximity, clear wheel value. */ input_report_abs(input, ABS_WHEEL, 0); } if (features->type != INTUOS4S) { input_report_key(input, BTN_7, (data[3] & 0x40)); input_report_key(input, BTN_8, (data[3] & 0x80)); } if (data[1] | (data[2] & 0x01) | data[3]) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type == DTK) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); input_report_key(input, BTN_2, (data[6] & 0x04)); input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); if (data[6] & 0x3f) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type == WACOM_13HD) { input_report_key(input, BTN_0, (data[3] & 0x01)); input_report_key(input, BTN_1, (data[4] & 0x01)); input_report_key(input, BTN_2, (data[4] & 0x02)); input_report_key(input, BTN_3, (data[4] & 0x04)); input_report_key(input, BTN_4, (data[4] & 0x08)); input_report_key(input, BTN_5, (data[4] & 0x10)); input_report_key(input, BTN_6, (data[4] & 0x20)); input_report_key(input, BTN_7, (data[4] & 0x40)); input_report_key(input, BTN_8, (data[4] & 0x80)); if ((data[3] & 0x01) | data[4]) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type == WACOM_24HD) { input_report_key(input, BTN_0, (data[6] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x02)); input_report_key(input, BTN_2, (data[6] & 0x04)); input_report_key(input, BTN_3, (data[6] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x10)); input_report_key(input, BTN_5, (data[6] & 0x20)); input_report_key(input, BTN_6, (data[6] & 0x40)); input_report_key(input, BTN_7, (data[6] & 0x80)); input_report_key(input, BTN_8, (data[8] & 0x01)); input_report_key(input, BTN_9, (data[8] & 0x02)); input_report_key(input, BTN_A, (data[8] & 0x04)); input_report_key(input, BTN_B, (data[8] & 0x08)); input_report_key(input, BTN_C, (data[8] & 0x10)); input_report_key(input, BTN_X, (data[8] & 0x20)); input_report_key(input, BTN_Y, (data[8] & 0x40)); input_report_key(input, BTN_Z, (data[8] & 0x80)); /* * Three "buttons" are available on the 24HD which are * physically implemented as a touchstrip. Each button * is approximately 3 bits wide with a 2 bit spacing. * The raw touchstrip bits are stored at: * ((data[3] & 0x1f) << 8) | data[4]) */ input_report_key(input, KEY_PROG1, data[4] & 0x07); input_report_key(input, KEY_PROG2, data[4] & 0xE0); input_report_key(input, KEY_PROG3, data[3] & 0x1C); if (data[1] & 0x80) { input_report_abs(input, ABS_WHEEL, (data[1] & 0x7f)); } else { /* Out of proximity, clear wheel value. */ input_report_abs(input, ABS_WHEEL, 0); } if (data[2] & 0x80) { input_report_abs(input, ABS_THROTTLE, (data[2] & 0x7f)); } else { /* Out of proximity, clear second wheel value. */ input_report_abs(input, ABS_THROTTLE, 0); } if (data[1] | data[2] | (data[3] & 0x1f) | data[4] | data[6] | data[8]) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type == WACOM_27QHD) { input_report_key(input, KEY_PROG1, data[2] & 0x01); input_report_key(input, KEY_PROG2, data[2] & 0x02); input_report_key(input, KEY_PROG3, data[2] & 0x04); input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4])); input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6])); input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8])); if ((data[2] & 0x07) | data[4] | data[5] | data[6] | data[7] | data[8] | data[9]) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type == CINTIQ_HYBRID) { /* * Do not send hardware buttons under Android. They * are already sent to the system through GPIO (and * have different meaning). */ input_report_key(input, BTN_1, (data[4] & 0x01)); input_report_key(input, BTN_2, (data[4] & 0x02)); input_report_key(input, BTN_3, (data[4] & 0x04)); input_report_key(input, BTN_4, (data[4] & 0x08)); input_report_key(input, BTN_5, (data[4] & 0x10)); /* Right */ input_report_key(input, BTN_6, (data[4] & 0x20)); /* Up */ input_report_key(input, BTN_7, (data[4] & 0x40)); /* Left */ input_report_key(input, BTN_8, (data[4] & 0x80)); /* Down */ input_report_key(input, BTN_0, (data[3] & 0x01)); /* Center */ if (data[4] | (data[3] & 0x01)) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else if (features->type >= INTUOS5S && features->type <= INTUOSPL) { int i; /* Touch ring mode switch has no capacitive sensor */ input_report_key(input, BTN_0, (data[3] & 0x01)); /* * ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in * addition to the mechanical switch. Switch data is * stored in data[4], capacitive data in data[5]. */ for (i = 0; i < 8; i++) input_report_key(input, BTN_1 + i, data[4] & (1 << i)); if (data[2] & 0x80) { input_report_abs(input, ABS_WHEEL, (data[2] & 0x7f)); } else { /* Out of proximity, clear wheel value. */ input_report_abs(input, ABS_WHEEL, 0); } if (data[2] | (data[3] & 0x01) | data[4] | data[5]) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } else { if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) { input_report_key(input, BTN_0, (data[5] & 0x01)); input_report_key(input, BTN_1, (data[6] & 0x01)); input_report_key(input, BTN_2, (data[6] & 0x02)); input_report_key(input, BTN_3, (data[6] & 0x04)); input_report_key(input, BTN_4, (data[6] & 0x08)); input_report_key(input, BTN_5, (data[6] & 0x10)); input_report_key(input, BTN_6, (data[6] & 0x20)); input_report_key(input, BTN_7, (data[6] & 0x40)); input_report_key(input, BTN_8, (data[6] & 0x80)); input_report_key(input, BTN_9, (data[7] & 0x01)); input_report_key(input, BTN_A, (data[8] & 0x01)); input_report_key(input, BTN_B, (data[8] & 0x02)); input_report_key(input, BTN_C, (data[8] & 0x04)); input_report_key(input, BTN_X, (data[8] & 0x08)); input_report_key(input, BTN_Y, (data[8] & 0x10)); input_report_key(input, BTN_Z, (data[8] & 0x20)); input_report_key(input, BTN_BASE, (data[8] & 0x40)); input_report_key(input, BTN_BASE2, (data[8] & 0x80)); if (features->type == WACOM_22HD) { input_report_key(input, KEY_PROG1, data[9] & 0x01); input_report_key(input, KEY_PROG2, data[9] & 0x02); input_report_key(input, KEY_PROG3, data[9] & 0x04); } } else { input_report_key(input, BTN_0, (data[5] & 0x01)); input_report_key(input, BTN_1, (data[5] & 0x02)); input_report_key(input, BTN_2, (data[5] & 0x04)); input_report_key(input, BTN_3, (data[5] & 0x08)); input_report_key(input, BTN_4, (data[6] & 0x01)); input_report_key(input, BTN_5, (data[6] & 0x02)); input_report_key(input, BTN_6, (data[6] & 0x04)); input_report_key(input, BTN_7, (data[6] & 0x08)); input_report_key(input, BTN_8, (data[5] & 0x10)); input_report_key(input, BTN_9, (data[6] & 0x10)); } input_report_abs(input, ABS_RX, ((data[1] & 0x1f) << 8) | data[2]); input_report_abs(input, ABS_RY, ((data[3] & 0x1f) << 8) | data[4]); if ((data[5] & 0x1f) | data[6] | (data[1] & 0x1f) | data[2] | (data[3] & 0x1f) | data[4] | data[8] | (data[7] & 0x01)) { input_report_abs(input, ABS_MISC, PAD_DEVICE_ID); } else { input_report_abs(input, ABS_MISC, 0); } } return 1; } /* process in/out prox events */ result = wacom_intuos_inout(wacom); if (result) return result - 1; if (features->type >= INTUOS3S) { input_report_abs(input, ABS_X, (data[2] << 9) | (data[3] << 1) | ((data[9] >> 1) & 1)); input_report_abs(input, ABS_Y, (data[4] << 9) | (data[5] << 1) | (data[9] & 1)); input_report_abs(input, ABS_DISTANCE, ((data[9] >> 2) & 0x3f)); } else { input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[2])); input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[4])); input_report_abs(input, ABS_DISTANCE, ((data[9] >> 3) & 0x1f)); } /* process general packets */ wacom_intuos_general(wacom); /* 4D mouse, 2D mouse, marker pen rotation, tilt mouse, or Lens cursor packets */ if ((data[1] & 0xbc) == 0xa8 || (data[1] & 0xbe) == 0xb0 || (data[1] & 0xbc) == 0xac) { if (data[1] & 0x02) { /* Rotation packet */ if (features->type >= INTUOS3S) { /* I3 marker pen rotation */ t = (data[6] << 3) | ((data[7] >> 5) & 7); t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) : ((t-1) / 2 + 450)) : (450 - t / 2) ; input_report_abs(input, ABS_Z, t); } else { /* 4D mouse rotation packet */ t = (data[6] << 3) | ((data[7] >> 5) & 7); input_report_abs(input, ABS_RZ, (data[7] & 0x20) ? ((t - 1) / 2) : -t / 2); } } else if (!(data[1] & 0x10) && features->type < INTUOS3S) { /* 4D mouse packet */ input_report_key(input, BTN_LEFT, data[8] & 0x01); input_report_key(input, BTN_MIDDLE, data[8] & 0x02); input_report_key(input, BTN_RIGHT, data[8] & 0x04); input_report_key(input, BTN_SIDE, data[8] & 0x20); input_report_key(input, BTN_EXTRA, data[8] & 0x10); t = (data[6] << 2) | ((data[7] >> 6) & 3); input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t); } else if (wacom->tool[idx] == BTN_TOOL_MOUSE) { /* I4 mouse */ if (features->type >= INTUOS4S && features->type <= INTUOSPL) { input_report_key(input, BTN_LEFT, data[6] & 0x01); input_report_key(input, BTN_MIDDLE, data[6] & 0x02); input_report_key(input, BTN_RIGHT, data[6] & 0x04); input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7) - ((data[7] & 0x40) >> 6)); input_report_key(input, BTN_SIDE, data[6] & 0x08); input_report_key(input, BTN_EXTRA, data[6] & 0x10); input_report_abs(input, ABS_TILT_X, (((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64); input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64); } else { /* 2D mouse packet */ input_report_key(input, BTN_LEFT, data[8] & 0x04); input_report_key(input, BTN_MIDDLE, data[8] & 0x08); input_report_key(input, BTN_RIGHT, data[8] & 0x10); input_report_rel(input, REL_WHEEL, (data[8] & 0x01) - ((data[8] & 0x02) >> 1)); /* I3 2D mouse side buttons */ if (features->type >= INTUOS3S && features->type <= INTUOS3L) { input_report_key(input, BTN_SIDE, data[8] & 0x40); input_report_key(input, BTN_EXTRA, data[8] & 0x20); } } } else if ((features->type < INTUOS3S || features->type == INTUOS3L || features->type == INTUOS4L || features->type == INTUOS5L || features->type == INTUOSPL) && wacom->tool[idx] == BTN_TOOL_LENS) { /* Lens cursor packets */ input_report_key(input, BTN_LEFT, data[8] & 0x01); input_report_key(input, BTN_MIDDLE, data[8] & 0x02); input_report_key(input, BTN_RIGHT, data[8] & 0x04); input_report_key(input, BTN_SIDE, data[8] & 0x10); input_report_key(input, BTN_EXTRA, data[8] & 0x08); } } input_report_abs(input, ABS_MISC, wacom->id[idx]); /* report tool id */ input_report_key(input, wacom->tool[idx], 1); input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]); wacom->reporting_data = true; return 1; } static int int_dist(int x1, int y1, int x2, int y2) { int x = x2 - x1; int y = y2 - y1; return int_sqrt(x*x + y*y); } static void wacom_intuos_bt_process_data(struct wacom_wac *wacom, unsigned char *data) { memcpy(wacom->data, data, 10); wacom_intuos_irq(wacom); input_sync(wacom->input); if (wacom->pad_input) input_sync(wacom->pad_input); } static int wacom_intuos_bt_irq(struct wacom_wac *wacom, size_t len) { unsigned char data[WACOM_PKGLEN_MAX]; int i = 1; unsigned power_raw, battery_capacity, bat_charging, ps_connected; memcpy(data, wacom->data, len); switch (data[0]) { case 0x04: wacom_intuos_bt_process_data(wacom, data + i); i += 10; /* fall through */ case 0x03: wacom_intuos_bt_process_data(wacom, data + i); i += 10; wacom_intuos_bt_process_data(wacom, data + i); i += 10; power_raw = data[i]; bat_charging = (power_raw & 0x08) ? 1 : 0; ps_connected = (power_raw & 0x10) ? 1 : 0; battery_capacity = batcap_i4[power_raw & 0x07]; wacom_notify_battery(wacom, battery_capacity, bat_charging, battery_capacity || bat_charging, ps_connected); break; default: dev_dbg(wacom->input->dev.parent, "Unknown report: %d,%d size:%zu\n", data[0], data[1], len); return 0; } return 0; } static int wacom_wac_finger_count_touches(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned touch_max = wacom->features.touch_max; int count = 0; int i; /* non-HID_GENERIC single touch input doesn't call this routine */ if ((touch_max == 1) && (wacom->features.type == HID_GENERIC)) return wacom->hid_data.tipswitch && !wacom->shared->stylus_in_proximity; for (i = 0; i < input->mt->num_slots; i++) { struct input_mt_slot *ps = &input->mt->slots[i]; int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID); if (id >= 0) count++; } return count; } static int wacom_24hdt_irq(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int i; int current_num_contacts = data[61]; int contacts_to_send = 0; int num_contacts_left = 4; /* maximum contacts per packet */ int byte_per_packet = WACOM_BYTES_PER_24HDT_PACKET; int y_offset = 2; if (wacom->features.type == WACOM_27QHDT) { current_num_contacts = data[63]; num_contacts_left = 10; byte_per_packet = WACOM_BYTES_PER_QHDTHID_PACKET; y_offset = 0; } /* * First packet resets the counter since only the first * packet in series will have non-zero current_num_contacts. */ if (current_num_contacts) wacom->num_contacts_left = current_num_contacts; contacts_to_send = min(num_contacts_left, wacom->num_contacts_left); for (i = 0; i < contacts_to_send; i++) { int offset = (byte_per_packet * i) + 1; bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity; int slot = input_mt_get_slot_by_key(input, data[offset + 1]); if (slot < 0) continue; input_mt_slot(input, slot); input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { int t_x = get_unaligned_le16(&data[offset + 2]); int t_y = get_unaligned_le16(&data[offset + 4 + y_offset]); input_report_abs(input, ABS_MT_POSITION_X, t_x); input_report_abs(input, ABS_MT_POSITION_Y, t_y); if (wacom->features.type != WACOM_27QHDT) { int c_x = get_unaligned_le16(&data[offset + 4]); int c_y = get_unaligned_le16(&data[offset + 8]); int w = get_unaligned_le16(&data[offset + 10]); int h = get_unaligned_le16(&data[offset + 12]); input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h)); input_report_abs(input, ABS_MT_WIDTH_MAJOR, min(w, h) + int_dist(t_x, t_y, c_x, c_y)); input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h)); input_report_abs(input, ABS_MT_ORIENTATION, w > h); } } } input_mt_sync_frame(input); wacom->num_contacts_left -= contacts_to_send; if (wacom->num_contacts_left <= 0) { wacom->num_contacts_left = 0; wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom); } return 1; } static int wacom_mt_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int i; int current_num_contacts = data[2]; int contacts_to_send = 0; int x_offset = 0; /* MTTPC does not support Height and Width */ if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B) x_offset = -4; /* * First packet resets the counter since only the first * packet in series will have non-zero current_num_contacts. */ if (current_num_contacts) wacom->num_contacts_left = current_num_contacts; /* There are at most 5 contacts per packet */ contacts_to_send = min(5, wacom->num_contacts_left); for (i = 0; i < contacts_to_send; i++) { int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3; bool touch = (data[offset] & 0x1) && !wacom->shared->stylus_in_proximity; int id = get_unaligned_le16(&data[offset + 1]); int slot = input_mt_get_slot_by_key(input, id); if (slot < 0) continue; input_mt_slot(input, slot); input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { int x = get_unaligned_le16(&data[offset + x_offset + 7]); int y = get_unaligned_le16(&data[offset + x_offset + 9]); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } } input_mt_sync_frame(input); wacom->num_contacts_left -= contacts_to_send; if (wacom->num_contacts_left <= 0) { wacom->num_contacts_left = 0; wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom); } return 1; } static int wacom_tpc_mt_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int i; for (i = 0; i < 2; i++) { int p = data[1] & (1 << i); bool touch = p && !wacom->shared->stylus_in_proximity; input_mt_slot(input, i); input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff; int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff; input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } } input_mt_sync_frame(input); /* keep touch state for pen event */ wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom); return 1; } static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len) { unsigned char *data = wacom->data; struct input_dev *input = wacom->input; bool prox = !wacom->shared->stylus_in_proximity; int x = 0, y = 0; if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG) return 0; if (len == WACOM_PKGLEN_TPC1FG) { prox = prox && (data[0] & 0x01); x = get_unaligned_le16(&data[1]); y = get_unaligned_le16(&data[3]); } else if (len == WACOM_PKGLEN_TPC1FG_B) { prox = prox && (data[2] & 0x01); x = get_unaligned_le16(&data[3]); y = get_unaligned_le16(&data[5]); } else { prox = prox && (data[1] & 0x01); x = le16_to_cpup((__le16 *)&data[2]); y = le16_to_cpup((__le16 *)&data[4]); } if (prox) { input_report_abs(input, ABS_X, x); input_report_abs(input, ABS_Y, y); } input_report_key(input, BTN_TOUCH, prox); /* keep touch state for pen events */ wacom->shared->touch_down = prox; return 1; } static int wacom_tpc_pen(struct wacom_wac *wacom) { unsigned char *data = wacom->data; struct input_dev *input = wacom->input; bool prox = data[1] & 0x20; if (!wacom->shared->stylus_in_proximity) /* first in prox */ /* Going into proximity select tool */ wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; /* keep pen state for touch events */ wacom->shared->stylus_in_proximity = prox; /* send pen events only when touch is up or forced out */ if (!wacom->shared->touch_down) { input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x10); input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x07) << 8) | data[6]); input_report_key(input, BTN_TOUCH, data[1] & 0x05); input_report_key(input, wacom->tool[0], prox); return 1; } return 0; } static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len) { unsigned char *data = wacom->data; dev_dbg(wacom->input->dev.parent, "%s: received report #%d\n", __func__, data[0]); switch (len) { case WACOM_PKGLEN_TPC1FG: return wacom_tpc_single_touch(wacom, len); case WACOM_PKGLEN_TPC2FG: return wacom_tpc_mt_touch(wacom); case WACOM_PKGLEN_PENABLED: return wacom_tpc_pen(wacom); default: switch (data[0]) { case WACOM_REPORT_TPC1FG: case WACOM_REPORT_TPCHID: case WACOM_REPORT_TPCST: case WACOM_REPORT_TPC1FGE: return wacom_tpc_single_touch(wacom, len); case WACOM_REPORT_TPCMT: case WACOM_REPORT_TPCMT2: return wacom_mt_touch(wacom); case WACOM_REPORT_PENABLED: return wacom_tpc_pen(wacom); } } return 0; } static void wacom_map_usage(struct wacom *wacom, struct hid_usage *usage, struct hid_field *field, __u8 type, __u16 code, int fuzz) { struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct input_dev *input = wacom_wac->input; int fmin = field->logical_minimum; int fmax = field->logical_maximum; usage->type = type; usage->code = code; set_bit(type, input->evbit); switch (type) { case EV_ABS: input_set_abs_params(input, code, fmin, fmax, fuzz, 0); input_abs_set_res(input, code, hidinput_calc_abs_res(field, code)); break; case EV_KEY: input_set_capability(input, EV_KEY, code); break; case EV_MSC: input_set_capability(input, EV_MSC, code); break; } } static void wacom_wac_pen_usage_mapping(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage) { struct wacom *wacom = hid_get_drvdata(hdev); switch (usage->hid) { case HID_GD_X: wacom_map_usage(wacom, usage, field, EV_ABS, ABS_X, 4); break; case HID_GD_Y: wacom_map_usage(wacom, usage, field, EV_ABS, ABS_Y, 4); break; case HID_DG_TIPPRESSURE: wacom_map_usage(wacom, usage, field, EV_ABS, ABS_PRESSURE, 0); break; case HID_DG_INRANGE: wacom_map_usage(wacom, usage, field, EV_KEY, BTN_TOOL_PEN, 0); break; case HID_DG_INVERT: wacom_map_usage(wacom, usage, field, EV_KEY, BTN_TOOL_RUBBER, 0); break; case HID_DG_ERASER: case HID_DG_TIPSWITCH: wacom_map_usage(wacom, usage, field, EV_KEY, BTN_TOUCH, 0); break; case HID_DG_BARRELSWITCH: wacom_map_usage(wacom, usage, field, EV_KEY, BTN_STYLUS, 0); break; case HID_DG_BARRELSWITCH2: wacom_map_usage(wacom, usage, field, EV_KEY, BTN_STYLUS2, 0); break; case HID_DG_TOOLSERIALNUMBER: wacom_map_usage(wacom, usage, field, EV_MSC, MSC_SERIAL, 0); break; } } static int wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct input_dev *input = wacom_wac->input; /* checking which Tool / tip switch to send */ switch (usage->hid) { case HID_DG_INRANGE: wacom_wac->hid_data.inrange_state = value; return 0; case HID_DG_INVERT: wacom_wac->hid_data.invert_state = value; return 0; case HID_DG_ERASER: case HID_DG_TIPSWITCH: wacom_wac->hid_data.tipswitch |= value; return 0; } /* send pen events only when touch is up or forced out */ if (!usage->type || wacom_wac->shared->touch_down) return 0; input_event(input, usage->type, usage->code, value); return 0; } static void wacom_wac_pen_report(struct hid_device *hdev, struct hid_report *report) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct input_dev *input = wacom_wac->input; bool prox = wacom_wac->hid_data.inrange_state; if (!wacom_wac->shared->stylus_in_proximity) /* first in prox */ /* Going into proximity select tool */ wacom_wac->tool[0] = wacom_wac->hid_data.invert_state ? BTN_TOOL_RUBBER : BTN_TOOL_PEN; /* keep pen state for touch events */ wacom_wac->shared->stylus_in_proximity = prox; /* send pen events only when touch is up or forced out */ if (!wacom_wac->shared->touch_down) { input_report_key(input, BTN_TOUCH, wacom_wac->hid_data.tipswitch); input_report_key(input, wacom_wac->tool[0], prox); wacom_wac->hid_data.tipswitch = false; input_sync(input); } } static void wacom_wac_finger_usage_mapping(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct wacom_features *features = &wacom_wac->features; unsigned touch_max = wacom_wac->features.touch_max; switch (usage->hid) { case HID_GD_X: features->last_slot_field = usage->hid; if (touch_max == 1) wacom_map_usage(wacom, usage, field, EV_ABS, ABS_X, 4); else wacom_map_usage(wacom, usage, field, EV_ABS, ABS_MT_POSITION_X, 4); break; case HID_GD_Y: features->last_slot_field = usage->hid; if (touch_max == 1) wacom_map_usage(wacom, usage, field, EV_ABS, ABS_Y, 4); else wacom_map_usage(wacom, usage, field, EV_ABS, ABS_MT_POSITION_Y, 4); break; case HID_DG_CONTACTID: features->last_slot_field = usage->hid; break; case HID_DG_INRANGE: features->last_slot_field = usage->hid; break; case HID_DG_INVERT: features->last_slot_field = usage->hid; break; case HID_DG_TIPSWITCH: features->last_slot_field = usage->hid; wacom_map_usage(wacom, usage, field, EV_KEY, BTN_TOUCH, 0); break; } } static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac, struct input_dev *input) { struct hid_data *hid_data = &wacom_wac->hid_data; bool mt = wacom_wac->features.touch_max > 1; bool prox = hid_data->tipswitch && !wacom_wac->shared->stylus_in_proximity; if (mt) { int slot; slot = input_mt_get_slot_by_key(input, hid_data->id); input_mt_slot(input, slot); input_mt_report_slot_state(input, MT_TOOL_FINGER, prox); } else { input_report_key(input, BTN_TOUCH, prox); } if (prox) { input_report_abs(input, mt ? ABS_MT_POSITION_X : ABS_X, hid_data->x); input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y, hid_data->y); } } static int wacom_wac_finger_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; switch (usage->hid) { case HID_GD_X: wacom_wac->hid_data.x = value; break; case HID_GD_Y: wacom_wac->hid_data.y = value; break; case HID_DG_CONTACTID: wacom_wac->hid_data.id = value; break; case HID_DG_TIPSWITCH: wacom_wac->hid_data.tipswitch = value; break; } if (usage->usage_index + 1 == field->report_count) { if (usage->hid == wacom_wac->features.last_slot_field) wacom_wac_finger_slot(wacom_wac, wacom_wac->input); } return 0; } static void wacom_wac_finger_report(struct hid_device *hdev, struct hid_report *report) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct input_dev *input = wacom_wac->input; unsigned touch_max = wacom_wac->features.touch_max; if (touch_max > 1) input_mt_sync_frame(input); input_sync(input); /* keep touch state for pen event */ wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac); } void wacom_wac_usage_mapping(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct input_dev *input = wacom_wac->input; /* currently, only direct devices have proper hid report descriptors */ __set_bit(INPUT_PROP_DIRECT, input->propbit); if (WACOM_PEN_FIELD(field)) return wacom_wac_pen_usage_mapping(hdev, field, usage); if (WACOM_FINGER_FIELD(field)) return wacom_wac_finger_usage_mapping(hdev, field, usage); } int wacom_wac_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { struct wacom *wacom = hid_get_drvdata(hdev); if (wacom->wacom_wac.features.type != HID_GENERIC) return 0; if (WACOM_PEN_FIELD(field)) return wacom_wac_pen_event(hdev, field, usage, value); if (WACOM_FINGER_FIELD(field)) return wacom_wac_finger_event(hdev, field, usage, value); return 0; } void wacom_wac_report(struct hid_device *hdev, struct hid_report *report) { struct wacom *wacom = hid_get_drvdata(hdev); struct wacom_wac *wacom_wac = &wacom->wacom_wac; struct hid_field *field = report->field[0]; if (wacom_wac->features.type != HID_GENERIC) return; if (WACOM_PEN_FIELD(field)) return wacom_wac_pen_report(hdev, report); if (WACOM_FINGER_FIELD(field)) return wacom_wac_finger_report(hdev, report); } static int wacom_bpt_touch(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; struct input_dev *input = wacom->input; struct input_dev *pad_input = wacom->pad_input; unsigned char *data = wacom->data; int i; if (data[0] != 0x02) return 0; for (i = 0; i < 2; i++) { int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); bool touch = data[offset + 3] & 0x80; /* * Touch events need to be disabled while stylus is * in proximity because user's hand is resting on touchpad * and sending unwanted events. User expects tablet buttons * to continue working though. */ touch = touch && !wacom->shared->stylus_in_proximity; input_mt_slot(input, i); input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { x <<= 5; y <<= 5; } input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } } input_mt_sync_frame(input); input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0); input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0); input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0); input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0); wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom); return 1; } static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data) { struct wacom_features *features = &wacom->features; struct input_dev *input = wacom->input; bool touch = data[1] & 0x80; int slot = input_mt_get_slot_by_key(input, data[0]); if (slot < 0) return; touch = touch && !wacom->shared->stylus_in_proximity; input_mt_slot(input, slot); input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { int x = (data[2] << 4) | (data[4] >> 4); int y = (data[3] << 4) | (data[4] & 0x0f); int width, height; if (features->type >= INTUOSPS && features->type <= INTUOSPL) { width = data[5] * 100; height = data[6] * 100; } else { /* * "a" is a scaled-down area which we assume is * roughly circular and which can be described as: * a=(pi*r^2)/C. */ int a = data[5]; int x_res = input_abs_get_res(input, ABS_MT_POSITION_X); int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y); width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE); height = width * y_res / x_res; } input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); input_report_abs(input, ABS_MT_TOUCH_MAJOR, width); input_report_abs(input, ABS_MT_TOUCH_MINOR, height); } } static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data) { struct input_dev *input = wacom->pad_input; struct wacom_features *features = &wacom->features; if (features->type == INTUOSHT) { input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0); input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0); } else { input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0); input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0); } input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0); input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0); } static int wacom_bpt3_touch(struct wacom_wac *wacom) { struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int count = data[1] & 0x07; int i; if (data[0] != 0x02) return 0; /* data has up to 7 fixed sized 8-byte messages starting at data[2] */ for (i = 0; i < count; i++) { int offset = (8 * i) + 2; int msg_id = data[offset]; if (msg_id >= 2 && msg_id <= 17) wacom_bpt3_touch_msg(wacom, data + offset); else if (msg_id == 128) wacom_bpt3_button_msg(wacom, data + offset); } input_mt_sync_frame(input); wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom); return 1; } static int wacom_bpt_pen(struct wacom_wac *wacom) { struct wacom_features *features = &wacom->features; struct input_dev *input = wacom->input; unsigned char *data = wacom->data; int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0; if (data[0] != WACOM_REPORT_PENABLED) return 0; if (wacom->shared->touch_down) return 0; prox = (data[1] & 0x20) == 0x20; /* * All reports shared between PEN and RUBBER tool must be * forced to a known starting value (zero) when transitioning to * out-of-prox. * * If not reset then, to userspace, it will look like lost events * if new tool comes in-prox with same values as previous tool sent. * * Hardware does report zero in most out-of-prox cases but not all. */ if (prox) { if (!wacom->shared->stylus_in_proximity) { if (data[1] & 0x08) { wacom->tool[0] = BTN_TOOL_RUBBER; wacom->id[0] = ERASER_DEVICE_ID; } else { wacom->tool[0] = BTN_TOOL_PEN; wacom->id[0] = STYLUS_DEVICE_ID; } wacom->shared->stylus_in_proximity = true; } x = le16_to_cpup((__le16 *)&data[2]); y = le16_to_cpup((__le16 *)&data[4]); p = le16_to_cpup((__le16 *)&data[6]); /* * Convert distance from out prox to distance from tablet. * distance will be greater than distance_max once * touching and applying pressure; do not report negative * distance. */ if (data[8] <= features->distance_max) d = features->distance_max - data[8]; pen = data[1] & 0x01; btn1 = data[1] & 0x02; btn2 = data[1] & 0x04; } input_report_key(input, BTN_TOUCH, pen); input_report_key(input, BTN_STYLUS, btn1); input_report_key(input, BTN_STYLUS2, btn2); input_report_abs(input, ABS_X, x); input_report_abs(input, ABS_Y, y); input_report_abs(input, ABS_PRESSURE, p); input_report_abs(input, ABS_DISTANCE, d); if (!prox) { wacom->id[0] = 0; wacom->shared->stylus_in_proximity = false; } input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */ input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */ return 1; } static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len) { if (len == WACOM_PKGLEN_BBTOUCH) return wacom_bpt_touch(wacom); else if (len == WACOM_PKGLEN_BBTOUCH3) return wacom_bpt3_touch(wacom); else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN) return wacom_bpt_pen(wacom); return 0; } static void wacom_bamboo_pad_pen_event(struct wacom_wac *wacom, unsigned char *data) { unsigned char prefix; /* * We need to reroute the event from the debug interface to the * pen interface. * We need to add the report ID to the actual pen report, so we * temporary overwrite the first byte to prevent having to kzalloc/kfree * and memcpy the report. */ prefix = data[0]; data[0] = WACOM_REPORT_BPAD_PEN; /* * actually reroute the event. * No need to check if wacom->shared->pen is valid, hid_input_report() * will check for us. */ hid_input_report(wacom->shared->pen, HID_INPUT_REPORT, data, WACOM_PKGLEN_PENABLED, 1); data[0] = prefix; } static int wacom_bamboo_pad_touch_event(struct wacom_wac *wacom, unsigned char *data) { struct input_dev *input = wacom->input; unsigned char *finger_data, prefix; unsigned id; int x, y; bool valid; prefix = data[0]; for (id = 0; id < wacom->features.touch_max; id++) { valid = !!(prefix & BIT(id)) && !wacom->shared->stylus_in_proximity; input_mt_slot(input, id); input_mt_report_slot_state(input, MT_TOOL_FINGER, valid); if (!valid) continue; finger_data = data + 1 + id * 3; x = finger_data[0] | ((finger_data[1] & 0x0f) << 8); y = (finger_data[2] << 4) | (finger_data[1] >> 4); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } input_mt_sync_frame(input); input_report_key(input, BTN_LEFT, prefix & 0x40); input_report_key(input, BTN_RIGHT, prefix & 0x80); /* keep touch state for pen event */ wacom->shared->touch_down = !!prefix && !wacom->shared->stylus_in_proximity; return 1; } static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len) { unsigned char *data = wacom->data; if (!((len == WACOM_PKGLEN_BPAD_TOUCH) || (len == WACOM_PKGLEN_BPAD_TOUCH_USB)) || (data[0] != WACOM_REPORT_BPAD_TOUCH)) return 0; if (data[1] & 0x01) wacom_bamboo_pad_pen_event(wacom, &data[1]); if (data[1] & 0x02) return wacom_bamboo_pad_touch_event(wacom, &data[9]); return 0; } static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len) { unsigned char *data = wacom->data; int connected; if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL) return 0; connected = data[1] & 0x01; if (connected) { int pid, battery, charging; if ((wacom->shared->type == INTUOSHT) && wacom->shared->touch_input && wacom->shared->touch_max) { input_report_switch(wacom->shared->touch_input, SW_MUTE_DEVICE, data[5] & 0x40); input_sync(wacom->shared->touch_input); } pid = get_unaligned_be16(&data[6]); battery = (data[5] & 0x3f) * 100 / 31; charging = !!(data[5] & 0x80); if (wacom->pid != pid) { wacom->pid = pid; wacom_schedule_work(wacom); } if (wacom->shared->type) wacom_notify_battery(wacom, battery, charging, 1, 0); } else if (wacom->pid != 0) { /* disconnected while previously connected */ wacom->pid = 0; wacom_schedule_work(wacom); wacom_notify_battery(wacom, 0, 0, 0, 0); } return 0; } static int wacom_status_irq(struct wacom_wac *wacom_wac, size_t len) { struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac); struct wacom_features *features = &wacom_wac->features; unsigned char *data = wacom_wac->data; if (data[0] != WACOM_REPORT_USB) return 0; if (features->type == INTUOSHT && wacom_wac->shared->touch_input && features->touch_max) { input_report_switch(wacom_wac->shared->touch_input, SW_MUTE_DEVICE, data[8] & 0x40); input_sync(wacom_wac->shared->touch_input); } if (data[9] & 0x02) { /* wireless module is attached */ int battery = (data[8] & 0x3f) * 100 / 31; bool charging = !!(data[8] & 0x80); wacom_notify_battery(wacom_wac, battery, charging, battery || charging, 1); if (!wacom->battery.dev && !(features->quirks & WACOM_QUIRK_BATTERY)) { features->quirks |= WACOM_QUIRK_BATTERY; INIT_WORK(&wacom->work, wacom_battery_work); wacom_schedule_work(wacom_wac); } } else if ((features->quirks & WACOM_QUIRK_BATTERY) && wacom->battery.dev) { features->quirks &= ~WACOM_QUIRK_BATTERY; INIT_WORK(&wacom->work, wacom_battery_work); wacom_schedule_work(wacom_wac); wacom_notify_battery(wacom_wac, 0, 0, 0, 0); } return 0; } void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) { bool sync; switch (wacom_wac->features.type) { case PENPARTNER: sync = wacom_penpartner_irq(wacom_wac); break; case PL: sync = wacom_pl_irq(wacom_wac); break; case WACOM_G4: case GRAPHIRE: case GRAPHIRE_BT: case WACOM_MO: sync = wacom_graphire_irq(wacom_wac); break; case PTU: sync = wacom_ptu_irq(wacom_wac); break; case DTU: sync = wacom_dtu_irq(wacom_wac); break; case DTUS: case DTUSX: sync = wacom_dtus_irq(wacom_wac); break; case INTUOS: case INTUOS3S: case INTUOS3: case INTUOS3L: case INTUOS4S: case INTUOS4: case INTUOS4L: case CINTIQ: case WACOM_BEE: case WACOM_13HD: case WACOM_21UX2: case WACOM_22HD: case WACOM_24HD: case WACOM_27QHD: case DTK: case CINTIQ_HYBRID: sync = wacom_intuos_irq(wacom_wac); break; case INTUOS4WL: sync = wacom_intuos_bt_irq(wacom_wac, len); break; case WACOM_24HDT: case WACOM_27QHDT: sync = wacom_24hdt_irq(wacom_wac); break; case INTUOS5S: case INTUOS5: case INTUOS5L: case INTUOSPS: case INTUOSPM: case INTUOSPL: if (len == WACOM_PKGLEN_BBTOUCH3) sync = wacom_bpt3_touch(wacom_wac); else if (wacom_wac->data[0] == WACOM_REPORT_USB) sync = wacom_status_irq(wacom_wac, len); else sync = wacom_intuos_irq(wacom_wac); break; case TABLETPC: case TABLETPCE: case TABLETPC2FG: case MTSCREEN: case MTTPC: case MTTPC_B: sync = wacom_tpc_irq(wacom_wac, len); break; case BAMBOO_PT: case INTUOSHT: if (wacom_wac->data[0] == WACOM_REPORT_USB) sync = wacom_status_irq(wacom_wac, len); else sync = wacom_bpt_irq(wacom_wac, len); break; case BAMBOO_PAD: sync = wacom_bamboo_pad_irq(wacom_wac, len); break; case WIRELESS: sync = wacom_wireless_irq(wacom_wac, len); break; default: sync = false; break; } if (sync) { input_sync(wacom_wac->input); if (wacom_wac->pad_input) input_sync(wacom_wac->pad_input); } } static void wacom_setup_cintiq(struct wacom_wac *wacom_wac) { struct input_dev *input_dev = wacom_wac->input; input_set_capability(input_dev, EV_MSC, MSC_SERIAL); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_BRUSH, input_dev->keybit); __set_bit(BTN_TOOL_PENCIL, input_dev->keybit); __set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features.distance_max, 0, 0); input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0); input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, 0, 0); input_abs_set_res(input_dev, ABS_TILT_X, 57); input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, 0, 0); input_abs_set_res(input_dev, ABS_TILT_Y, 57); } static void wacom_setup_intuos(struct wacom_wac *wacom_wac) { struct input_dev *input_dev = wacom_wac->input; input_set_capability(input_dev, EV_REL, REL_WHEEL); wacom_setup_cintiq(wacom_wac); __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_RIGHT, input_dev->keybit); __set_bit(BTN_MIDDLE, input_dev->keybit); __set_bit(BTN_SIDE, input_dev->keybit); __set_bit(BTN_EXTRA, input_dev->keybit); __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_TOOL_LENS, input_dev->keybit); input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0); input_abs_set_res(input_dev, ABS_RZ, 287); input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0); } void wacom_setup_device_quirks(struct wacom_features *features) { /* touch device found but size is not defined. use default */ if (features->device_type == BTN_TOOL_FINGER && !features->x_max) { features->x_max = 1023; features->y_max = 1023; } /* quirk for bamboo touch with 2 low res touches */ if (features->type == BAMBOO_PT && features->pktlen == WACOM_PKGLEN_BBTOUCH) { features->x_max <<= 5; features->y_max <<= 5; features->x_fuzz <<= 5; features->y_fuzz <<= 5; features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES; } if (features->type == WIRELESS) { /* monitor never has input and pen/touch have delayed create */ features->quirks |= WACOM_QUIRK_NO_INPUT; /* must be monitor interface if no device_type set */ if (!features->device_type) { features->quirks |= WACOM_QUIRK_MONITOR; features->quirks |= WACOM_QUIRK_BATTERY; } } } static void wacom_abs_set_axis(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; if (features->device_type == BTN_TOOL_PEN) { input_set_abs_params(input_dev, ABS_X, features->x_min, features->x_max, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, features->y_min, features->y_max, features->y_fuzz, 0); input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, features->pressure_fuzz, 0); /* penabled devices have fixed resolution for each model */ input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); } else { if (features->touch_max == 1) { input_set_abs_params(input_dev, ABS_X, 0, features->x_max, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); } if (features->touch_max > 1) { input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, features->x_max, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, features->y_max, features->y_fuzz, 0); input_abs_set_res(input_dev, ABS_MT_POSITION_X, features->x_resolution); input_abs_set_res(input_dev, ABS_MT_POSITION_Y, features->y_resolution); } } } int wacom_setup_pentouch_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); if (features->type == HID_GENERIC) /* setup has already been done */ return 0; __set_bit(BTN_TOUCH, input_dev->keybit); __set_bit(ABS_MISC, input_dev->absbit); wacom_abs_set_axis(input_dev, wacom_wac); switch (features->type) { case GRAPHIRE_BT: __clear_bit(ABS_MISC, input_dev->absbit); case WACOM_MO: case WACOM_G4: input_set_abs_params(input_dev, ABS_DISTANCE, 0, features->distance_max, 0, 0); /* fall through */ case GRAPHIRE: input_set_capability(input_dev, EV_REL, REL_WHEEL); __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_RIGHT, input_dev->keybit); __set_bit(BTN_MIDDLE, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case WACOM_27QHD: case WACOM_24HD: case DTK: case WACOM_22HD: case WACOM_21UX2: case WACOM_BEE: case CINTIQ: case WACOM_13HD: case CINTIQ_HYBRID: input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_abs_set_res(input_dev, ABS_Z, 287); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); wacom_setup_cintiq(wacom_wac); break; case INTUOS3: case INTUOS3L: case INTUOS3S: case INTUOS4: case INTUOS4WL: case INTUOS4L: case INTUOS4S: input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_abs_set_res(input_dev, ABS_Z, 287); /* fall through */ case INTUOS: __set_bit(INPUT_PROP_POINTER, input_dev->propbit); wacom_setup_intuos(wacom_wac); break; case INTUOS5: case INTUOS5L: case INTUOSPM: case INTUOSPL: case INTUOS5S: case INTUOSPS: __set_bit(INPUT_PROP_POINTER, input_dev->propbit); if (features->device_type == BTN_TOOL_PEN) { input_set_abs_params(input_dev, ABS_DISTANCE, 0, features->distance_max, 0, 0); input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_abs_set_res(input_dev, ABS_Z, 287); wacom_setup_intuos(wacom_wac); } else if (features->device_type == BTN_TOOL_FINGER) { __clear_bit(ABS_MISC, input_dev->absbit); input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, features->y_max, 0, 0); input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER); } break; case WACOM_24HDT: if (features->device_type == BTN_TOOL_FINGER) { input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0); input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0); input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0); } /* fall through */ case WACOM_27QHDT: case MTSCREEN: case MTTPC: case MTTPC_B: case TABLETPC2FG: if (features->device_type == BTN_TOOL_FINGER && features->touch_max > 1) input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT); /* fall through */ case TABLETPC: case TABLETPCE: __clear_bit(ABS_MISC, input_dev->absbit); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ /* fall through */ case DTUS: case DTUSX: case PL: case DTU: __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); break; case PTU: __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ case PENPARTNER: __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case INTUOSHT: if (features->touch_max && features->device_type == BTN_TOOL_FINGER) { input_dev->evbit[0] |= BIT_MASK(EV_SW); __set_bit(SW_MUTE_DEVICE, input_dev->swbit); } /* fall through */ case BAMBOO_PT: __clear_bit(ABS_MISC, input_dev->absbit); if (features->device_type == BTN_TOOL_FINGER) { if (features->touch_max) { if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) { input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0); input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, features->y_max, 0, 0); } input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER); } else { /* buttons/keys only interface */ __clear_bit(ABS_X, input_dev->absbit); __clear_bit(ABS_Y, input_dev->absbit); __clear_bit(BTN_TOUCH, input_dev->keybit); /* PAD is setup by wacom_setup_pad_input_capabilities later */ return 1; } } else if (features->device_type == BTN_TOOL_PEN) { __set_bit(INPUT_PROP_POINTER, input_dev->propbit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); input_set_abs_params(input_dev, ABS_DISTANCE, 0, features->distance_max, 0, 0); } break; case BAMBOO_PAD: __clear_bit(ABS_MISC, input_dev->absbit); input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER); __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_RIGHT, input_dev->keybit); break; } return 0; } int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, struct wacom_wac *wacom_wac) { struct wacom_features *features = &wacom_wac->features; int i; input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); /* kept for making legacy xf86-input-wacom working with the wheels */ __set_bit(ABS_MISC, input_dev->absbit); /* kept for making legacy xf86-input-wacom accepting the pad */ input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0); input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); /* kept for making udev and libwacom accepting the pad */ __set_bit(BTN_STYLUS, input_dev->keybit); switch (features->type) { case GRAPHIRE_BT: __set_bit(BTN_0, input_dev->keybit); __set_bit(BTN_1, input_dev->keybit); break; case WACOM_MO: __set_bit(BTN_BACK, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); __set_bit(BTN_RIGHT, input_dev->keybit); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); break; case WACOM_G4: __set_bit(BTN_BACK, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); input_set_capability(input_dev, EV_REL, REL_WHEEL); break; case WACOM_24HD: __set_bit(BTN_A, input_dev->keybit); __set_bit(BTN_B, input_dev->keybit); __set_bit(BTN_C, input_dev->keybit); __set_bit(BTN_X, input_dev->keybit); __set_bit(BTN_Y, input_dev->keybit); __set_bit(BTN_Z, input_dev->keybit); for (i = 0; i < 10; i++) __set_bit(BTN_0 + i, input_dev->keybit); __set_bit(KEY_PROG1, input_dev->keybit); __set_bit(KEY_PROG2, input_dev->keybit); __set_bit(KEY_PROG3, input_dev->keybit); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); break; case WACOM_27QHD: __set_bit(KEY_PROG1, input_dev->keybit); __set_bit(KEY_PROG2, input_dev->keybit); __set_bit(KEY_PROG3, input_dev->keybit); input_set_abs_params(input_dev, ABS_X, -2048, 2048, 0, 0); input_abs_set_res(input_dev, ABS_X, 1024); /* points/g */ input_set_abs_params(input_dev, ABS_Y, -2048, 2048, 0, 0); input_abs_set_res(input_dev, ABS_Y, 1024); input_set_abs_params(input_dev, ABS_Z, -2048, 2048, 0, 0); input_abs_set_res(input_dev, ABS_Z, 1024); __set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit); break; case DTK: for (i = 0; i < 6; i++) __set_bit(BTN_0 + i, input_dev->keybit); break; case WACOM_22HD: __set_bit(KEY_PROG1, input_dev->keybit); __set_bit(KEY_PROG2, input_dev->keybit); __set_bit(KEY_PROG3, input_dev->keybit); /* fall through */ case WACOM_21UX2: __set_bit(BTN_A, input_dev->keybit); __set_bit(BTN_B, input_dev->keybit); __set_bit(BTN_C, input_dev->keybit); __set_bit(BTN_X, input_dev->keybit); __set_bit(BTN_Y, input_dev->keybit); __set_bit(BTN_Z, input_dev->keybit); __set_bit(BTN_BASE, input_dev->keybit); __set_bit(BTN_BASE2, input_dev->keybit); /* fall through */ case WACOM_BEE: __set_bit(BTN_8, input_dev->keybit); __set_bit(BTN_9, input_dev->keybit); /* fall through */ case CINTIQ: for (i = 0; i < 8; i++) __set_bit(BTN_0 + i, input_dev->keybit); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); break; case WACOM_13HD: for (i = 0; i < 9; i++) __set_bit(BTN_0 + i, input_dev->keybit); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); break; case INTUOS3: case INTUOS3L: __set_bit(BTN_4, input_dev->keybit); __set_bit(BTN_5, input_dev->keybit); __set_bit(BTN_6, input_dev->keybit); __set_bit(BTN_7, input_dev->keybit); input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0); /* fall through */ case INTUOS3S: __set_bit(BTN_0, input_dev->keybit); __set_bit(BTN_1, input_dev->keybit); __set_bit(BTN_2, input_dev->keybit); __set_bit(BTN_3, input_dev->keybit); input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0); break; case INTUOS5: case INTUOS5L: case INTUOSPM: case INTUOSPL: __set_bit(BTN_7, input_dev->keybit); __set_bit(BTN_8, input_dev->keybit); /* fall through */ case INTUOS5S: case INTUOSPS: /* touch interface does not have the pad device */ if (features->device_type != BTN_TOOL_PEN) return -ENODEV; for (i = 0; i < 7; i++) __set_bit(BTN_0 + i, input_dev->keybit); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); break; case INTUOS4WL: /* * For Bluetooth devices, the udev rule does not work correctly * for pads unless we add a stylus capability, which forces * ID_INPUT_TABLET to be set. */ __set_bit(BTN_STYLUS, input_dev->keybit); /* fall through */ case INTUOS4: case INTUOS4L: __set_bit(BTN_7, input_dev->keybit); __set_bit(BTN_8, input_dev->keybit); /* fall through */ case INTUOS4S: for (i = 0; i < 7; i++) __set_bit(BTN_0 + i, input_dev->keybit); input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0); break; case CINTIQ_HYBRID: for (i = 0; i < 9; i++) __set_bit(BTN_0 + i, input_dev->keybit); break; case DTUS: for (i = 0; i < 4; i++) __set_bit(BTN_0 + i, input_dev->keybit); break; case INTUOSHT: case BAMBOO_PT: /* pad device is on the touch interface */ if ((features->device_type != BTN_TOOL_FINGER) || /* Bamboo Pen only tablet does not have pad */ ((features->type == BAMBOO_PT) && !features->touch_max)) return -ENODEV; __clear_bit(ABS_MISC, input_dev->absbit); __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); __set_bit(BTN_BACK, input_dev->keybit); __set_bit(BTN_RIGHT, input_dev->keybit); break; default: /* no pad supported */ return -ENODEV; } return 0; } static const struct wacom_features wacom_features_0x00 = { "Wacom Penpartner", 5040, 3780, 255, 0, PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x10 = { "Wacom Graphire", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x81 = { "Wacom Graphire BT", 16704, 12064, 511, 32, GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x11 = { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x12 = { "Wacom Graphire2 5x7", 13918, 10206, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x13 = { "Wacom Graphire3", 10208, 7424, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x14 = { "Wacom Graphire3 6x8", 16704, 12064, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x15 = { "Wacom Graphire4 4x5", 10208, 7424, 511, 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x16 = { "Wacom Graphire4 6x8", 16704, 12064, 511, 63, WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x17 = { "Wacom BambooFun 4x5", 14760, 9225, 511, 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x18 = { "Wacom BambooFun 6x8", 21648, 13530, 511, 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x19 = { "Wacom Bamboo1 Medium", 16704, 12064, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x60 = { "Wacom Volito", 5104, 3712, 511, 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x61 = { "Wacom PenStation2", 3250, 2320, 255, 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x62 = { "Wacom Volito2 4x5", 5104, 3712, 511, 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x63 = { "Wacom Volito2 2x3", 3248, 2320, 511, 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x64 = { "Wacom PenPartner2", 3250, 2320, 511, 63, GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES }; static const struct wacom_features wacom_features_0x65 = { "Wacom Bamboo", 14760, 9225, 511, 63, WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x69 = { "Wacom Bamboo1", 5104, 3712, 511, 63, GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES }; static const struct wacom_features wacom_features_0x6A = { "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x6B = { "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63, GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x20 = { "Wacom Intuos 4x5", 12700, 10600, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x21 = { "Wacom Intuos 6x8", 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x22 = { "Wacom Intuos 9x12", 30480, 24060, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x23 = { "Wacom Intuos 12x12", 30480, 31680, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x24 = { "Wacom Intuos 12x18", 45720, 31680, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x30 = { "Wacom PL400", 5408, 4056, 255, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x31 = { "Wacom PL500", 6144, 4608, 255, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x32 = { "Wacom PL600", 6126, 4604, 255, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x33 = { "Wacom PL600SX", 6260, 5016, 255, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x34 = { "Wacom PL550", 6144, 4608, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x35 = { "Wacom PL800", 7220, 5780, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x37 = { "Wacom PL700", 6758, 5406, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x38 = { "Wacom PL510", 6282, 4762, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x39 = { "Wacom DTU710", 34080, 27660, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC4 = { "Wacom DTF521", 6282, 4762, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC0 = { "Wacom DTF720", 6858, 5506, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0xC2 = { "Wacom DTF720a", 6858, 5506, 511, 0, PL, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x03 = { "Wacom Cintiq Partner", 20480, 15360, 511, 0, PTU, WACOM_PL_RES, WACOM_PL_RES }; static const struct wacom_features wacom_features_0x41 = { "Wacom Intuos2 4x5", 12700, 10600, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x42 = { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x43 = { "Wacom Intuos2 9x12", 30480, 24060, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x44 = { "Wacom Intuos2 12x12", 30480, 31680, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x45 = { "Wacom Intuos2 12x18", 45720, 31680, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xB0 = { "Wacom Intuos3 4x5", 25400, 20320, 1023, 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB1 = { "Wacom Intuos3 6x8", 40640, 30480, 1023, 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB2 = { "Wacom Intuos3 9x12", 60960, 45720, 1023, 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB3 = { "Wacom Intuos3 12x12", 60960, 60960, 1023, 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB4 = { "Wacom Intuos3 12x19", 97536, 60960, 1023, 63, INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB5 = { "Wacom Intuos3 6x11", 54204, 31750, 1023, 63, INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB7 = { "Wacom Intuos3 4x6", 31496, 19685, 1023, 63, INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB8 = { "Wacom Intuos4 4x6", 31496, 19685, 2047, 63, INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xB9 = { "Wacom Intuos4 6x9", 44704, 27940, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBA = { "Wacom Intuos4 8x13", 65024, 40640, 2047, 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBB = { "Wacom Intuos4 12x19", 97536, 60960, 2047, 63, INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBC = { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xBD = { "Wacom Intuos4 WL", 40640, 25400, 2047, 63, INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x26 = { "Wacom Intuos5 touch S", 31496, 19685, 2047, 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x27 = { "Wacom Intuos5 touch M", 44704, 27940, 2047, 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x28 = { "Wacom Intuos5 touch L", 65024, 40640, 2047, 63, INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x29 = { "Wacom Intuos5 S", 31496, 19685, 2047, 63, INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x2A = { "Wacom Intuos5 M", 44704, 27940, 2047, 63, INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x314 = { "Wacom Intuos Pro S", 31496, 19685, 2047, 63, INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x315 = { "Wacom Intuos Pro M", 44704, 27940, 2047, 63, INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x317 = { "Wacom Intuos Pro L", 65024, 40640, 2047, 63, INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xF4 = { "Wacom Cintiq 24HD", 104080, 65200, 2047, 63, WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0xF8 = { "Wacom Cintiq 24HD touch", 104080, 65200, 2047, 63, /* Pen */ WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 }; static const struct wacom_features wacom_features_0xF6 = { "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x32A = { "Wacom Cintiq 27QHD", 119740, 67520, 2047, 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0x32B = { "Wacom Cintiq 27QHD touch", 119740, 67520, 2047, 63, WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32C }; static const struct wacom_features wacom_features_0x32C = { "Wacom Cintiq 27QHD touch", .type = WACOM_27QHDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32B, .touch_max = 10 }; static const struct wacom_features wacom_features_0x3F = { "Wacom Cintiq 21UX", 87200, 65600, 1023, 63, CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC5 = { "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0xC6 = { "Wacom Cintiq 12WX", 53020, 33440, 1023, 63, WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES }; static const struct wacom_features wacom_features_0x304 = { "Wacom Cintiq 13HD", 59152, 33448, 1023, 63, WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0xC7 = { "Wacom DTU1931", 37832, 30305, 511, 0, PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xCE = { "Wacom DTU2231", 47864, 27011, 511, 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE }; static const struct wacom_features wacom_features_0xF0 = { "Wacom DTU1631", 34623, 19553, 511, 0, DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xFB = { "Wacom DTU1031", 21896, 13760, 511, 0, DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, WACOM_DTU_OFFSET, WACOM_DTU_OFFSET }; static const struct wacom_features wacom_features_0x32F = { "Wacom DTU1031X", 22472, 12728, 511, 0, DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES, WACOM_DTU_OFFSET, WACOM_DTU_OFFSET }; static const struct wacom_features wacom_features_0x57 = { "Wacom DTK2241", 95640, 54060, 2047, 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0x59 = /* Pen */ { "Wacom DTH2242", 95640, 54060, 2047, 63, DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D }; static const struct wacom_features wacom_features_0x5D = /* Touch */ { "Wacom DTH2242", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0xCC = { "Wacom Cintiq 21UX2", 86800, 65200, 2047, 63, WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0xFA = { "Wacom Cintiq 22HD", 95440, 53860, 2047, 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET }; static const struct wacom_features wacom_features_0x5B = { "Wacom Cintiq 22HDT", 95440, 53860, 2047, 63, WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e }; static const struct wacom_features wacom_features_0x5E = { "Wacom Cintiq 22HDT", .type = WACOM_24HDT, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x90 = { "Wacom ISDv4 90", 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x93 = { "Wacom ISDv4 93", 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x97 = { "Wacom ISDv4 97", 26202, 16325, 511, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9A = { "Wacom ISDv4 9A", 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x9F = { "Wacom ISDv4 9F", 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE2 = { "Wacom ISDv4 E2", 26202, 16325, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xE3 = { "Wacom ISDv4 E3", 26202, 16325, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xE5 = { "Wacom ISDv4 E5", 26202, 16325, 255, 0, MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xE6 = { "Wacom ISDv4 E6", 27760, 15694, 255, 0, TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xEC = { "Wacom ISDv4 EC", 25710, 14500, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xED = { "Wacom ISDv4 ED", 26202, 16325, 255, 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xEF = { "Wacom ISDv4 EF", 26202, 16325, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x100 = { "Wacom ISDv4 100", 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x101 = { "Wacom ISDv4 101", 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10D = { "Wacom ISDv4 10D", 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10E = { "Wacom ISDv4 10E", 27760, 15694, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x10F = { "Wacom ISDv4 10F", 27760, 15694, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x116 = { "Wacom ISDv4 116", 26202, 16325, 255, 0, TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x12C = { "Wacom ISDv4 12C", 27848, 15752, 2047, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4001 = { "Wacom ISDv4 4001", 26202, 16325, 255, 0, MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x4004 = { "Wacom ISDv4 4004", 11060, 6220, 255, 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x5000 = { "Wacom ISDv4 5000", 27848, 15752, 1023, 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x5002 = { "Wacom ISDv4 5002", 29576, 16724, 1023, 0, MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x47 = { "Wacom Intuos2 6x8", 20320, 16240, 1023, 31, INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x84 = { "Wacom Wireless Receiver", 0, 0, 0, 0, WIRELESS, 0, 0, .touch_max = 16 }; static const struct wacom_features wacom_features_0xD0 = { "Wacom Bamboo 2FG", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD1 = { "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD2 = { "Wacom Bamboo Craft", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD3 = { "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD4 = { "Wacom Bamboo Pen", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD5 = { "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xD6 = { "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD7 = { "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xD8 = { "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDA = { "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDB = { "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 }; static const struct wacom_features wacom_features_0xDD = { "Wacom Bamboo Connect", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0xDE = { "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0xDF = { "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 }; static const struct wacom_features wacom_features_0x300 = { "Wacom Bamboo One S", 14720, 9225, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x301 = { "Wacom Bamboo One M", 21648, 13530, 1023, 31, BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x302 = { "Wacom Intuos PT S", 15200, 9500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x303 = { "Wacom Intuos PT M", 21600, 13500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x30E = { "Wacom Intuos S", 15200, 9500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x6004 = { "ISD-V4", 12800, 8000, 255, 0, TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES }; static const struct wacom_features wacom_features_0x307 = { "Wacom ISDv5 307", 59152, 33448, 2047, 63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 }; static const struct wacom_features wacom_features_0x309 = { "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x30A = { "Wacom ISDv5 30A", 59152, 33448, 2047, 63, CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET, .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C }; static const struct wacom_features wacom_features_0x30C = { "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */ .oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_0x318 = { "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */ .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; static const struct wacom_features wacom_features_0x319 = { "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */ .type = BAMBOO_PAD, 35, 48, .touch_max = 4 }; static const struct wacom_features wacom_features_0x323 = { "Wacom Intuos P M", 21600, 13500, 1023, 31, INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE }; static const struct wacom_features wacom_features_HID_ANY_ID = { "Wacom HID", .type = HID_GENERIC }; #define USB_DEVICE_WACOM(prod) \ HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ .driver_data = (kernel_ulong_t)&wacom_features_##prod #define BT_DEVICE_WACOM(prod) \ HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ .driver_data = (kernel_ulong_t)&wacom_features_##prod #define I2C_DEVICE_WACOM(prod) \ HID_DEVICE(BUS_I2C, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ .driver_data = (kernel_ulong_t)&wacom_features_##prod #define USB_DEVICE_LENOVO(prod) \ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ .driver_data = (kernel_ulong_t)&wacom_features_##prod const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x00) }, { USB_DEVICE_WACOM(0x03) }, { USB_DEVICE_WACOM(0x10) }, { USB_DEVICE_WACOM(0x11) }, { USB_DEVICE_WACOM(0x12) }, { USB_DEVICE_WACOM(0x13) }, { USB_DEVICE_WACOM(0x14) }, { USB_DEVICE_WACOM(0x15) }, { USB_DEVICE_WACOM(0x16) }, { USB_DEVICE_WACOM(0x17) }, { USB_DEVICE_WACOM(0x18) }, { USB_DEVICE_WACOM(0x19) }, { USB_DEVICE_WACOM(0x20) }, { USB_DEVICE_WACOM(0x21) }, { USB_DEVICE_WACOM(0x22) }, { USB_DEVICE_WACOM(0x23) }, { USB_DEVICE_WACOM(0x24) }, { USB_DEVICE_WACOM(0x26) }, { USB_DEVICE_WACOM(0x27) }, { USB_DEVICE_WACOM(0x28) }, { USB_DEVICE_WACOM(0x29) }, { USB_DEVICE_WACOM(0x2A) }, { USB_DEVICE_WACOM(0x30) }, { USB_DEVICE_WACOM(0x31) }, { USB_DEVICE_WACOM(0x32) }, { USB_DEVICE_WACOM(0x33) }, { USB_DEVICE_WACOM(0x34) }, { USB_DEVICE_WACOM(0x35) }, { USB_DEVICE_WACOM(0x37) }, { USB_DEVICE_WACOM(0x38) }, { USB_DEVICE_WACOM(0x39) }, { USB_DEVICE_WACOM(0x3F) }, { USB_DEVICE_WACOM(0x41) }, { USB_DEVICE_WACOM(0x42) }, { USB_DEVICE_WACOM(0x43) }, { USB_DEVICE_WACOM(0x44) }, { USB_DEVICE_WACOM(0x45) }, { USB_DEVICE_WACOM(0x47) }, { USB_DEVICE_WACOM(0x57) }, { USB_DEVICE_WACOM(0x59) }, { USB_DEVICE_WACOM(0x5B) }, { USB_DEVICE_WACOM(0x5D) }, { USB_DEVICE_WACOM(0x5E) }, { USB_DEVICE_WACOM(0x60) }, { USB_DEVICE_WACOM(0x61) }, { USB_DEVICE_WACOM(0x62) }, { USB_DEVICE_WACOM(0x63) }, { USB_DEVICE_WACOM(0x64) }, { USB_DEVICE_WACOM(0x65) }, { USB_DEVICE_WACOM(0x69) }, { USB_DEVICE_WACOM(0x6A) }, { USB_DEVICE_WACOM(0x6B) }, { BT_DEVICE_WACOM(0x81) }, { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0x90) }, { USB_DEVICE_WACOM(0x93) }, { USB_DEVICE_WACOM(0x97) }, { USB_DEVICE_WACOM(0x9A) }, { USB_DEVICE_WACOM(0x9F) }, { USB_DEVICE_WACOM(0xB0) }, { USB_DEVICE_WACOM(0xB1) }, { USB_DEVICE_WACOM(0xB2) }, { USB_DEVICE_WACOM(0xB3) }, { USB_DEVICE_WACOM(0xB4) }, { USB_DEVICE_WACOM(0xB5) }, { USB_DEVICE_WACOM(0xB7) }, { USB_DEVICE_WACOM(0xB8) }, { USB_DEVICE_WACOM(0xB9) }, { USB_DEVICE_WACOM(0xBA) }, { USB_DEVICE_WACOM(0xBB) }, { USB_DEVICE_WACOM(0xBC) }, { BT_DEVICE_WACOM(0xBD) }, { USB_DEVICE_WACOM(0xC0) }, { USB_DEVICE_WACOM(0xC2) }, { USB_DEVICE_WACOM(0xC4) }, { USB_DEVICE_WACOM(0xC5) }, { USB_DEVICE_WACOM(0xC6) }, { USB_DEVICE_WACOM(0xC7) }, { USB_DEVICE_WACOM(0xCC) }, { USB_DEVICE_WACOM(0xCE) }, { USB_DEVICE_WACOM(0xD0) }, { USB_DEVICE_WACOM(0xD1) }, { USB_DEVICE_WACOM(0xD2) }, { USB_DEVICE_WACOM(0xD3) }, { USB_DEVICE_WACOM(0xD4) }, { USB_DEVICE_WACOM(0xD5) }, { USB_DEVICE_WACOM(0xD6) }, { USB_DEVICE_WACOM(0xD7) }, { USB_DEVICE_WACOM(0xD8) }, { USB_DEVICE_WACOM(0xDA) }, { USB_DEVICE_WACOM(0xDB) }, { USB_DEVICE_WACOM(0xDD) }, { USB_DEVICE_WACOM(0xDE) }, { USB_DEVICE_WACOM(0xDF) }, { USB_DEVICE_WACOM(0xE2) }, { USB_DEVICE_WACOM(0xE3) }, { USB_DEVICE_WACOM(0xE5) }, { USB_DEVICE_WACOM(0xE6) }, { USB_DEVICE_WACOM(0xEC) }, { USB_DEVICE_WACOM(0xED) }, { USB_DEVICE_WACOM(0xEF) }, { USB_DEVICE_WACOM(0xF0) }, { USB_DEVICE_WACOM(0xF4) }, { USB_DEVICE_WACOM(0xF6) }, { USB_DEVICE_WACOM(0xF8) }, { USB_DEVICE_WACOM(0xFA) }, { USB_DEVICE_WACOM(0xFB) }, { USB_DEVICE_WACOM(0x100) }, { USB_DEVICE_WACOM(0x101) }, { USB_DEVICE_WACOM(0x10D) }, { USB_DEVICE_WACOM(0x10E) }, { USB_DEVICE_WACOM(0x10F) }, { USB_DEVICE_WACOM(0x116) }, { USB_DEVICE_WACOM(0x12C) }, { USB_DEVICE_WACOM(0x300) }, { USB_DEVICE_WACOM(0x301) }, { USB_DEVICE_WACOM(0x302) }, { USB_DEVICE_WACOM(0x303) }, { USB_DEVICE_WACOM(0x304) }, { USB_DEVICE_WACOM(0x307) }, { USB_DEVICE_WACOM(0x309) }, { USB_DEVICE_WACOM(0x30A) }, { USB_DEVICE_WACOM(0x30C) }, { USB_DEVICE_WACOM(0x30E) }, { USB_DEVICE_WACOM(0x314) }, { USB_DEVICE_WACOM(0x315) }, { USB_DEVICE_WACOM(0x317) }, { USB_DEVICE_WACOM(0x318) }, { USB_DEVICE_WACOM(0x319) }, { USB_DEVICE_WACOM(0x323) }, { USB_DEVICE_WACOM(0x32A) }, { USB_DEVICE_WACOM(0x32B) }, { USB_DEVICE_WACOM(0x32C) }, { USB_DEVICE_WACOM(0x32F) }, { USB_DEVICE_WACOM(0x4001) }, { USB_DEVICE_WACOM(0x4004) }, { USB_DEVICE_WACOM(0x5000) }, { USB_DEVICE_WACOM(0x5002) }, { USB_DEVICE_LENOVO(0x6004) }, { USB_DEVICE_WACOM(HID_ANY_ID) }, { I2C_DEVICE_WACOM(HID_ANY_ID) }, { } }; MODULE_DEVICE_TABLE(hid, wacom_ids);