/********************************************************************* * $Id: smsc-ircc2.c,v 1.19.2.5 2002/10/27 11:34:26 dip Exp $ * * Description: Driver for the SMC Infrared Communications Controller * Status: Experimental. * Author: Daniele Peri (peri@csai.unipa.it) * Created at: * Modified at: * Modified by: * * Copyright (c) 2002 Daniele Peri * All Rights Reserved. * Copyright (c) 2002 Jean Tourrilhes * * * Based on smc-ircc.c: * * Copyright (c) 2001 Stefani Seibold * Copyright (c) 1999-2001 Dag Brattli * Copyright (c) 1998-1999 Thomas Davis, * * and irport.c: * * Copyright (c) 1997, 1998, 1999-2000 Dag Brattli, All Rights Reserved. * * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * ********************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "smsc-ircc2.h" #include "smsc-sio.h" MODULE_AUTHOR("Daniele Peri "); MODULE_DESCRIPTION("SMC IrCC SIR/FIR controller driver"); MODULE_LICENSE("GPL"); static int ircc_dma = 255; module_param(ircc_dma, int, 0); MODULE_PARM_DESC(ircc_dma, "DMA channel"); static int ircc_irq = 255; module_param(ircc_irq, int, 0); MODULE_PARM_DESC(ircc_irq, "IRQ line"); static int ircc_fir; module_param(ircc_fir, int, 0); MODULE_PARM_DESC(ircc_fir, "FIR Base Address"); static int ircc_sir; module_param(ircc_sir, int, 0); MODULE_PARM_DESC(ircc_sir, "SIR Base Address"); static int ircc_cfg; module_param(ircc_cfg, int, 0); MODULE_PARM_DESC(ircc_cfg, "Configuration register base address"); static int ircc_transceiver; module_param(ircc_transceiver, int, 0); MODULE_PARM_DESC(ircc_transceiver, "Transceiver type"); /* Types */ struct smsc_transceiver { char *name; void (*set_for_speed)(int fir_base, u32 speed); int (*probe)(int fir_base); }; struct smsc_chip { char *name; #if 0 u8 type; #endif u16 flags; u8 devid; u8 rev; }; struct smsc_chip_address { unsigned int cfg_base; unsigned int type; }; /* Private data for each instance */ struct smsc_ircc_cb { struct net_device *netdev; /* Yes! we are some kind of netdevice */ struct net_device_stats stats; struct irlap_cb *irlap; /* The link layer we are binded to */ chipio_t io; /* IrDA controller information */ iobuff_t tx_buff; /* Transmit buffer */ iobuff_t rx_buff; /* Receive buffer */ dma_addr_t tx_buff_dma; dma_addr_t rx_buff_dma; struct qos_info qos; /* QoS capabilities for this device */ spinlock_t lock; /* For serializing operations */ __u32 new_speed; __u32 flags; /* Interface flags */ int tx_buff_offsets[10]; /* Offsets between frames in tx_buff */ int tx_len; /* Number of frames in tx_buff */ int transceiver; struct platform_device *pldev; }; /* Constants */ #define SMSC_IRCC2_DRIVER_NAME "smsc-ircc2" #define SMSC_IRCC2_C_IRDA_FALLBACK_SPEED 9600 #define SMSC_IRCC2_C_DEFAULT_TRANSCEIVER 1 #define SMSC_IRCC2_C_NET_TIMEOUT 0 #define SMSC_IRCC2_C_SIR_STOP 0 static const char *driver_name = SMSC_IRCC2_DRIVER_NAME; /* Prototypes */ static int smsc_ircc_open(unsigned int firbase, unsigned int sirbase, u8 dma, u8 irq); static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base); static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq); static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self); static void smsc_ircc_init_chip(struct smsc_ircc_cb *self); static int __exit smsc_ircc_close(struct smsc_ircc_cb *self); static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self); static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self); static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self); static int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev); static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev); static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs); static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self); static void smsc_ircc_change_speed(void *priv, u32 speed); static void smsc_ircc_set_sir_speed(void *priv, u32 speed); static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs); static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev); static void smsc_ircc_sir_start(struct smsc_ircc_cb *self); #if SMSC_IRCC2_C_SIR_STOP static void smsc_ircc_sir_stop(struct smsc_ircc_cb *self); #endif static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self); static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len); static int smsc_ircc_net_open(struct net_device *dev); static int smsc_ircc_net_close(struct net_device *dev); static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); #if SMSC_IRCC2_C_NET_TIMEOUT static void smsc_ircc_timeout(struct net_device *dev); #endif static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev); static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self); static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self); static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed); static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self); /* Probing */ static int __init smsc_ircc_look_for_chips(void); static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type); static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfg_base, char *type); static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type); static int __init smsc_superio_fdc(unsigned short cfg_base); static int __init smsc_superio_lpc(unsigned short cfg_base); /* Transceivers specific functions */ static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed); static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base); static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed); static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base); static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed); static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base); /* Power Management */ static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level); static int smsc_ircc_resume(struct device *dev, u32 level); static struct device_driver smsc_ircc_driver = { .name = SMSC_IRCC2_DRIVER_NAME, .bus = &platform_bus_type, .suspend = smsc_ircc_suspend, .resume = smsc_ircc_resume, }; /* Transceivers for SMSC-ircc */ static struct smsc_transceiver smsc_transceivers[] = { { "Toshiba Satellite 1800 (GP data pin select)", smsc_ircc_set_transceiver_toshiba_sat1800, smsc_ircc_probe_transceiver_toshiba_sat1800 }, { "Fast pin select", smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select, smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select }, { "ATC IRMode", smsc_ircc_set_transceiver_smsc_ircc_atc, smsc_ircc_probe_transceiver_smsc_ircc_atc }, { NULL, NULL } }; #define SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS (ARRAY_SIZE(smsc_transceivers) - 1) /* SMC SuperIO chipsets definitions */ #define KEY55_1 0 /* SuperIO Configuration mode with Key <0x55> */ #define KEY55_2 1 /* SuperIO Configuration mode with Key <0x55,0x55> */ #define NoIRDA 2 /* SuperIO Chip has no IRDA Port */ #define SIR 0 /* SuperIO Chip has only slow IRDA */ #define FIR 4 /* SuperIO Chip has fast IRDA */ #define SERx4 8 /* SuperIO Chip supports 115,2 KBaud * 4=460,8 KBaud */ static struct smsc_chip __initdata fdc_chips_flat[] = { /* Base address 0x3f0 or 0x370 */ { "37C44", KEY55_1|NoIRDA, 0x00, 0x00 }, /* This chip cannot be detected */ { "37C665GT", KEY55_2|NoIRDA, 0x65, 0x01 }, { "37C665GT", KEY55_2|NoIRDA, 0x66, 0x01 }, { "37C669", KEY55_2|SIR|SERx4, 0x03, 0x02 }, { "37C669", KEY55_2|SIR|SERx4, 0x04, 0x02 }, /* ID? */ { "37C78", KEY55_2|NoIRDA, 0x78, 0x00 }, { "37N769", KEY55_1|FIR|SERx4, 0x28, 0x00 }, { "37N869", KEY55_1|FIR|SERx4, 0x29, 0x00 }, { NULL } }; static struct smsc_chip __initdata fdc_chips_paged[] = { /* Base address 0x3f0 or 0x370 */ { "37B72X", KEY55_1|SIR|SERx4, 0x4c, 0x00 }, { "37B77X", KEY55_1|SIR|SERx4, 0x43, 0x00 }, { "37B78X", KEY55_1|SIR|SERx4, 0x44, 0x00 }, { "37B80X", KEY55_1|SIR|SERx4, 0x42, 0x00 }, { "37C67X", KEY55_1|FIR|SERx4, 0x40, 0x00 }, { "37C93X", KEY55_2|SIR|SERx4, 0x02, 0x01 }, { "37C93XAPM", KEY55_1|SIR|SERx4, 0x30, 0x01 }, { "37C93XFR", KEY55_2|FIR|SERx4, 0x03, 0x01 }, { "37M707", KEY55_1|SIR|SERx4, 0x42, 0x00 }, { "37M81X", KEY55_1|SIR|SERx4, 0x4d, 0x00 }, { "37N958FR", KEY55_1|FIR|SERx4, 0x09, 0x04 }, { "37N971", KEY55_1|FIR|SERx4, 0x0a, 0x00 }, { "37N972", KEY55_1|FIR|SERx4, 0x0b, 0x00 }, { NULL } }; static struct smsc_chip __initdata lpc_chips_flat[] = { /* Base address 0x2E or 0x4E */ { "47N227", KEY55_1|FIR|SERx4, 0x5a, 0x00 }, { "47N267", KEY55_1|FIR|SERx4, 0x5e, 0x00 }, { NULL } }; static struct smsc_chip __initdata lpc_chips_paged[] = { /* Base address 0x2E or 0x4E */ { "47B27X", KEY55_1|SIR|SERx4, 0x51, 0x00 }, { "47B37X", KEY55_1|SIR|SERx4, 0x52, 0x00 }, { "47M10X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, { "47M120", KEY55_1|NoIRDA|SERx4, 0x5c, 0x00 }, { "47M13X", KEY55_1|SIR|SERx4, 0x59, 0x00 }, { "47M14X", KEY55_1|SIR|SERx4, 0x5f, 0x00 }, { "47N252", KEY55_1|FIR|SERx4, 0x0e, 0x00 }, { "47S42X", KEY55_1|SIR|SERx4, 0x57, 0x00 }, { NULL } }; #define SMSCSIO_TYPE_FDC 1 #define SMSCSIO_TYPE_LPC 2 #define SMSCSIO_TYPE_FLAT 4 #define SMSCSIO_TYPE_PAGED 8 static struct smsc_chip_address __initdata possible_addresses[] = { { 0x3f0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, { 0x370, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, { 0xe0, SMSCSIO_TYPE_FDC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, { 0x2e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, { 0x4e, SMSCSIO_TYPE_LPC|SMSCSIO_TYPE_FLAT|SMSCSIO_TYPE_PAGED }, { 0, 0 } }; /* Globals */ static struct smsc_ircc_cb *dev_self[] = { NULL, NULL }; static unsigned short dev_count; static inline void register_bank(int iobase, int bank) { outb(((inb(iobase + IRCC_MASTER) & 0xf0) | (bank & 0x07)), iobase + IRCC_MASTER); } /******************************************************************************* * * * SMSC-ircc stuff * * *******************************************************************************/ /* * Function smsc_ircc_init () * * Initialize chip. Just try to find out how many chips we are dealing with * and where they are */ static int __init smsc_ircc_init(void) { int ret; IRDA_DEBUG(1, "%s\n", __FUNCTION__); ret = driver_register(&smsc_ircc_driver); if (ret) { IRDA_ERROR("%s, Can't register driver!\n", driver_name); return ret; } dev_count = 0; if (ircc_fir > 0 && ircc_sir > 0) { IRDA_MESSAGE(" Overriding FIR address 0x%04x\n", ircc_fir); IRDA_MESSAGE(" Overriding SIR address 0x%04x\n", ircc_sir); if (smsc_ircc_open(ircc_fir, ircc_sir, ircc_dma, ircc_irq)) ret = -ENODEV; } else { /* try user provided configuration register base address */ if (ircc_cfg > 0) { IRDA_MESSAGE(" Overriding configuration address " "0x%04x\n", ircc_cfg); if (!smsc_superio_fdc(ircc_cfg)) ret = 0; if (!smsc_superio_lpc(ircc_cfg)) ret = 0; } if (smsc_ircc_look_for_chips() > 0) ret = 0; } if (ret) driver_unregister(&smsc_ircc_driver); return ret; } /* * Function smsc_ircc_open (firbase, sirbase, dma, irq) * * Try to open driver instance * */ static int __init smsc_ircc_open(unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) { struct smsc_ircc_cb *self; struct net_device *dev; int err; IRDA_DEBUG(1, "%s\n", __FUNCTION__); err = smsc_ircc_present(fir_base, sir_base); if (err) goto err_out; err = -ENOMEM; if (dev_count >= ARRAY_SIZE(dev_self)) { IRDA_WARNING("%s(), too many devices!\n", __FUNCTION__); goto err_out1; } /* * Allocate new instance of the driver */ dev = alloc_irdadev(sizeof(struct smsc_ircc_cb)); if (!dev) { IRDA_WARNING("%s() can't allocate net device\n", __FUNCTION__); goto err_out1; } SET_MODULE_OWNER(dev); dev->hard_start_xmit = smsc_ircc_hard_xmit_sir; #if SMSC_IRCC2_C_NET_TIMEOUT dev->tx_timeout = smsc_ircc_timeout; dev->watchdog_timeo = HZ * 2; /* Allow enough time for speed change */ #endif dev->open = smsc_ircc_net_open; dev->stop = smsc_ircc_net_close; dev->do_ioctl = smsc_ircc_net_ioctl; dev->get_stats = smsc_ircc_net_get_stats; self = dev->priv; self->netdev = dev; /* Make ifconfig display some details */ dev->base_addr = self->io.fir_base = fir_base; dev->irq = self->io.irq = irq; /* Need to store self somewhere */ dev_self[dev_count] = self; spin_lock_init(&self->lock); self->rx_buff.truesize = SMSC_IRCC2_RX_BUFF_TRUESIZE; self->tx_buff.truesize = SMSC_IRCC2_TX_BUFF_TRUESIZE; self->rx_buff.head = dma_alloc_coherent(NULL, self->rx_buff.truesize, &self->rx_buff_dma, GFP_KERNEL); if (self->rx_buff.head == NULL) { IRDA_ERROR("%s, Can't allocate memory for receive buffer!\n", driver_name); goto err_out2; } self->tx_buff.head = dma_alloc_coherent(NULL, self->tx_buff.truesize, &self->tx_buff_dma, GFP_KERNEL); if (self->tx_buff.head == NULL) { IRDA_ERROR("%s, Can't allocate memory for transmit buffer!\n", driver_name); goto err_out3; } memset(self->rx_buff.head, 0, self->rx_buff.truesize); memset(self->tx_buff.head, 0, self->tx_buff.truesize); self->rx_buff.in_frame = FALSE; self->rx_buff.state = OUTSIDE_FRAME; self->tx_buff.data = self->tx_buff.head; self->rx_buff.data = self->rx_buff.head; smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq); smsc_ircc_setup_qos(self); smsc_ircc_init_chip(self); if (ircc_transceiver > 0 && ircc_transceiver < SMSC_IRCC2_C_NUMBER_OF_TRANSCEIVERS) self->transceiver = ircc_transceiver; else smsc_ircc_probe_transceiver(self); err = register_netdev(self->netdev); if (err) { IRDA_ERROR("%s, Network device registration failed!\n", driver_name); goto err_out4; } self->pldev = platform_device_register_simple(SMSC_IRCC2_DRIVER_NAME, dev_count, NULL, 0); if (IS_ERR(self->pldev)) { err = PTR_ERR(self->pldev); goto err_out5; } dev_set_drvdata(&self->pldev->dev, self); IRDA_MESSAGE("IrDA: Registered device %s\n", dev->name); dev_count++; return 0; err_out5: unregister_netdev(self->netdev); err_out4: dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); err_out3: dma_free_coherent(NULL, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); err_out2: free_netdev(self->netdev); dev_self[dev_count] = NULL; err_out1: release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); err_out: return err; } /* * Function smsc_ircc_present(fir_base, sir_base) * * Check the smsc-ircc chip presence * */ static int smsc_ircc_present(unsigned int fir_base, unsigned int sir_base) { unsigned char low, high, chip, config, dma, irq, version; if (!request_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get fir_base of 0x%03x\n", __FUNCTION__, fir_base); goto out1; } if (!request_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT, driver_name)) { IRDA_WARNING("%s: can't get sir_base of 0x%03x\n", __FUNCTION__, sir_base); goto out2; } register_bank(fir_base, 3); high = inb(fir_base + IRCC_ID_HIGH); low = inb(fir_base + IRCC_ID_LOW); chip = inb(fir_base + IRCC_CHIP_ID); version = inb(fir_base + IRCC_VERSION); config = inb(fir_base + IRCC_INTERFACE); dma = config & IRCC_INTERFACE_DMA_MASK; irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; if (high != 0x10 || low != 0xb8 || (chip != 0xf1 && chip != 0xf2)) { IRDA_WARNING("%s(), addr 0x%04x - no device found!\n", __FUNCTION__, fir_base); goto out3; } IRDA_MESSAGE("SMsC IrDA Controller found\n IrCC version %d.%d, " "firport 0x%03x, sirport 0x%03x dma=%d, irq=%d\n", chip & 0x0f, version, fir_base, sir_base, dma, irq); return 0; out3: release_region(sir_base, SMSC_IRCC2_SIR_CHIP_IO_EXTENT); out2: release_region(fir_base, SMSC_IRCC2_FIR_CHIP_IO_EXTENT); out1: return -ENODEV; } /* * Function smsc_ircc_setup_io(self, fir_base, sir_base, dma, irq) * * Setup I/O * */ static void smsc_ircc_setup_io(struct smsc_ircc_cb *self, unsigned int fir_base, unsigned int sir_base, u8 dma, u8 irq) { unsigned char config, chip_dma, chip_irq; register_bank(fir_base, 3); config = inb(fir_base + IRCC_INTERFACE); chip_dma = config & IRCC_INTERFACE_DMA_MASK; chip_irq = (config & IRCC_INTERFACE_IRQ_MASK) >> 4; self->io.fir_base = fir_base; self->io.sir_base = sir_base; self->io.fir_ext = SMSC_IRCC2_FIR_CHIP_IO_EXTENT; self->io.sir_ext = SMSC_IRCC2_SIR_CHIP_IO_EXTENT; self->io.fifo_size = SMSC_IRCC2_FIFO_SIZE; self->io.speed = SMSC_IRCC2_C_IRDA_FALLBACK_SPEED; if (irq < 255) { if (irq != chip_irq) IRDA_MESSAGE("%s, Overriding IRQ - chip says %d, using %d\n", driver_name, chip_irq, irq); self->io.irq = irq; } else self->io.irq = chip_irq; if (dma < 255) { if (dma != chip_dma) IRDA_MESSAGE("%s, Overriding DMA - chip says %d, using %d\n", driver_name, chip_dma, dma); self->io.dma = dma; } else self->io.dma = chip_dma; } /* * Function smsc_ircc_setup_qos(self) * * Setup qos * */ static void smsc_ircc_setup_qos(struct smsc_ircc_cb *self) { /* Initialize QoS for this device */ irda_init_max_qos_capabilies(&self->qos); self->qos.baud_rate.bits = IR_9600|IR_19200|IR_38400|IR_57600| IR_115200|IR_576000|IR_1152000|(IR_4000000 << 8); self->qos.min_turn_time.bits = SMSC_IRCC2_MIN_TURN_TIME; self->qos.window_size.bits = SMSC_IRCC2_WINDOW_SIZE; irda_qos_bits_to_value(&self->qos); } /* * Function smsc_ircc_init_chip(self) * * Init chip * */ static void smsc_ircc_init_chip(struct smsc_ircc_cb *self) { int iobase, ir_mode, ctrl, fast; IRDA_ASSERT(self != NULL, return;); iobase = self->io.fir_base; ir_mode = IRCC_CFGA_IRDA_SIR_A; ctrl = 0; fast = 0; register_bank(iobase, 0); outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); outb(0x00, iobase + IRCC_MASTER); register_bank(iobase, 1); outb(((inb(iobase + IRCC_SCE_CFGA) & 0x87) | ir_mode), iobase + IRCC_SCE_CFGA); #ifdef smsc_669 /* Uses pin 88/89 for Rx/Tx */ outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), iobase + IRCC_SCE_CFGB); #else outb(((inb(iobase + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), iobase + IRCC_SCE_CFGB); #endif (void) inb(iobase + IRCC_FIFO_THRESHOLD); outb(SMSC_IRCC2_FIFO_THRESHOLD, iobase + IRCC_FIFO_THRESHOLD); register_bank(iobase, 4); outb((inb(iobase + IRCC_CONTROL) & 0x30) | ctrl, iobase + IRCC_CONTROL); register_bank(iobase, 0); outb(fast, iobase + IRCC_LCR_A); smsc_ircc_set_sir_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); /* Power on device */ outb(0x00, iobase + IRCC_MASTER); } /* * Function smsc_ircc_net_ioctl (dev, rq, cmd) * * Process IOCTL commands for this device * */ static int smsc_ircc_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct if_irda_req *irq = (struct if_irda_req *) rq; struct smsc_ircc_cb *self; unsigned long flags; int ret = 0; IRDA_ASSERT(dev != NULL, return -1;); self = dev->priv; IRDA_ASSERT(self != NULL, return -1;); IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd); switch (cmd) { case SIOCSBANDWIDTH: /* Set bandwidth */ if (!capable(CAP_NET_ADMIN)) ret = -EPERM; else { /* Make sure we are the only one touching * self->io.speed and the hardware - Jean II */ spin_lock_irqsave(&self->lock, flags); smsc_ircc_change_speed(self, irq->ifr_baudrate); spin_unlock_irqrestore(&self->lock, flags); } break; case SIOCSMEDIABUSY: /* Set media busy */ if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; } irda_device_set_media_busy(self->netdev, TRUE); break; case SIOCGRECEIVING: /* Check if we are receiving right now */ irq->ifr_receiving = smsc_ircc_is_receiving(self); break; #if 0 case SIOCSDTRRTS: if (!capable(CAP_NET_ADMIN)) { ret = -EPERM; break; } smsc_ircc_sir_set_dtr_rts(dev, irq->ifr_dtr, irq->ifr_rts); break; #endif default: ret = -EOPNOTSUPP; } return ret; } static struct net_device_stats *smsc_ircc_net_get_stats(struct net_device *dev) { struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) dev->priv; return &self->stats; } #if SMSC_IRCC2_C_NET_TIMEOUT /* * Function smsc_ircc_timeout (struct net_device *dev) * * The networking timeout management. * */ static void smsc_ircc_timeout(struct net_device *dev) { struct smsc_ircc_cb *self; unsigned long flags; self = (struct smsc_ircc_cb *) dev->priv; IRDA_WARNING("%s: transmit timed out, changing speed to: %d\n", dev->name, self->io.speed); spin_lock_irqsave(&self->lock, flags); smsc_ircc_sir_start(self); smsc_ircc_change_speed(self, self->io.speed); dev->trans_start = jiffies; netif_wake_queue(dev); spin_unlock_irqrestore(&self->lock, flags); } #endif /* * Function smsc_ircc_hard_xmit_sir (struct sk_buff *skb, struct net_device *dev) * * Transmits the current frame until FIFO is full, then * waits until the next transmit interrupt, and continues until the * frame is transmitted. */ int smsc_ircc_hard_xmit_sir(struct sk_buff *skb, struct net_device *dev) { struct smsc_ircc_cb *self; unsigned long flags; s32 speed; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(dev != NULL, return 0;); self = (struct smsc_ircc_cb *) dev->priv; IRDA_ASSERT(self != NULL, return 0;); netif_stop_queue(dev); /* Make sure test of self->io.speed & speed change are atomic */ spin_lock_irqsave(&self->lock, flags); /* Check if we need to change the speed */ speed = irda_get_next_speed(skb); if (speed != self->io.speed && speed != -1) { /* Check for empty frame */ if (!skb->len) { /* * We send frames one by one in SIR mode (no * pipelining), so at this point, if we were sending * a previous frame, we just received the interrupt * telling us it is finished (UART_IIR_THRI). * Therefore, waiting for the transmitter to really * finish draining the fifo won't take too long. * And the interrupt handler is not expected to run. * - Jean II */ smsc_ircc_sir_wait_hw_transmitter_finish(self); smsc_ircc_change_speed(self, speed); spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; } self->new_speed = speed; } /* Init tx buffer */ self->tx_buff.data = self->tx_buff.head; /* Copy skb to tx_buff while wrapping, stuffing and making CRC */ self->tx_buff.len = async_wrap_skb(skb, self->tx_buff.data, self->tx_buff.truesize); self->stats.tx_bytes += self->tx_buff.len; /* Turn on transmit finished interrupt. Will fire immediately! */ outb(UART_IER_THRI, self->io.sir_base + UART_IER); spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; } /* * Function smsc_ircc_set_fir_speed (self, baud) * * Change the speed of the device * */ static void smsc_ircc_set_fir_speed(struct smsc_ircc_cb *self, u32 speed) { int fir_base, ir_mode, ctrl, fast; IRDA_ASSERT(self != NULL, return;); fir_base = self->io.fir_base; self->io.speed = speed; switch (speed) { default: case 576000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_CRC; fast = 0; IRDA_DEBUG(0, "%s(), handling baud of 576000\n", __FUNCTION__); break; case 1152000: ir_mode = IRCC_CFGA_IRDA_HDLC; ctrl = IRCC_1152 | IRCC_CRC; fast = IRCC_LCR_A_FAST | IRCC_LCR_A_GP_DATA; IRDA_DEBUG(0, "%s(), handling baud of 1152000\n", __FUNCTION__); break; case 4000000: ir_mode = IRCC_CFGA_IRDA_4PPM; ctrl = IRCC_CRC; fast = IRCC_LCR_A_FAST; IRDA_DEBUG(0, "%s(), handling baud of 4000000\n", __FUNCTION__); break; } #if 0 Now in tranceiver! /* This causes an interrupt */ register_bank(fir_base, 0); outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast, fir_base + IRCC_LCR_A); #endif register_bank(fir_base, 1); outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | ir_mode), fir_base + IRCC_SCE_CFGA); register_bank(fir_base, 4); outb((inb(fir_base + IRCC_CONTROL) & 0x30) | ctrl, fir_base + IRCC_CONTROL); } /* * Function smsc_ircc_fir_start(self) * * Change the speed of the device * */ static void smsc_ircc_fir_start(struct smsc_ircc_cb *self) { struct net_device *dev; int fir_base; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; IRDA_ASSERT(dev != NULL, return;); fir_base = self->io.fir_base; /* Reset everything */ /* Install FIR transmit handler */ dev->hard_start_xmit = smsc_ircc_hard_xmit_fir; /* Clear FIFO */ outb(inb(fir_base + IRCC_LCR_A) | IRCC_LCR_A_FIFO_RESET, fir_base + IRCC_LCR_A); /* Enable interrupt */ /*outb(IRCC_IER_ACTIVE_FRAME|IRCC_IER_EOM, fir_base + IRCC_IER);*/ register_bank(fir_base, 1); /* Select the TX/RX interface */ #ifdef SMSC_669 /* Uses pin 88/89 for Rx/Tx */ outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_COM), fir_base + IRCC_SCE_CFGB); #else outb(((inb(fir_base + IRCC_SCE_CFGB) & 0x3f) | IRCC_CFGB_MUX_IR), fir_base + IRCC_SCE_CFGB); #endif (void) inb(fir_base + IRCC_FIFO_THRESHOLD); /* Enable SCE interrupts */ outb(0, fir_base + IRCC_MASTER); register_bank(fir_base, 0); outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, fir_base + IRCC_IER); outb(IRCC_MASTER_INT_EN, fir_base + IRCC_MASTER); } /* * Function smsc_ircc_fir_stop(self, baud) * * Change the speed of the device * */ static void smsc_ircc_fir_stop(struct smsc_ircc_cb *self) { int fir_base; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(self != NULL, return;); fir_base = self->io.fir_base; register_bank(fir_base, 0); /*outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER);*/ outb(inb(fir_base + IRCC_LCR_B) & IRCC_LCR_B_SIP_ENABLE, fir_base + IRCC_LCR_B); } /* * Function smsc_ircc_change_speed(self, baud) * * Change the speed of the device * * This function *must* be called with spinlock held, because it may * be called from the irq handler. - Jean II */ static void smsc_ircc_change_speed(void *priv, u32 speed) { struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv; struct net_device *dev; int last_speed_was_sir; IRDA_DEBUG(0, "%s() changing speed to: %d\n", __FUNCTION__, speed); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; last_speed_was_sir = self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED; #if 0 /* Temp Hack */ speed= 1152000; self->io.speed = speed; last_speed_was_sir = 0; smsc_ircc_fir_start(self); #endif if (self->io.speed == 0) smsc_ircc_sir_start(self); #if 0 if (!last_speed_was_sir) speed = self->io.speed; #endif if (self->io.speed != speed) smsc_ircc_set_transceiver_for_speed(self, speed); self->io.speed = speed; if (speed <= SMSC_IRCC2_MAX_SIR_SPEED) { if (!last_speed_was_sir) { smsc_ircc_fir_stop(self); smsc_ircc_sir_start(self); } smsc_ircc_set_sir_speed(self, speed); } else { if (last_speed_was_sir) { #if SMSC_IRCC2_C_SIR_STOP smsc_ircc_sir_stop(self); #endif smsc_ircc_fir_start(self); } smsc_ircc_set_fir_speed(self, speed); #if 0 self->tx_buff.len = 10; self->tx_buff.data = self->tx_buff.head; smsc_ircc_dma_xmit(self, 4000); #endif /* Be ready for incoming frames */ smsc_ircc_dma_receive(self); } netif_wake_queue(dev); } /* * Function smsc_ircc_set_sir_speed (self, speed) * * Set speed of IrDA port to specified baudrate * */ void smsc_ircc_set_sir_speed(void *priv, __u32 speed) { struct smsc_ircc_cb *self = (struct smsc_ircc_cb *) priv; int iobase; int fcr; /* FIFO control reg */ int lcr; /* Line control reg */ int divisor; IRDA_DEBUG(0, "%s(), Setting speed to: %d\n", __FUNCTION__, speed); IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; /* Update accounting for new speed */ self->io.speed = speed; /* Turn off interrupts */ outb(0, iobase + UART_IER); divisor = SMSC_IRCC2_MAX_SIR_SPEED / speed; fcr = UART_FCR_ENABLE_FIFO; /* * Use trigger level 1 to avoid 3 ms. timeout delay at 9600 bps, and * almost 1,7 ms at 19200 bps. At speeds above that we can just forget * about this timeout since it will always be fast enough. */ fcr |= self->io.speed < 38400 ? UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; /* IrDA ports use 8N1 */ lcr = UART_LCR_WLEN8; outb(UART_LCR_DLAB | lcr, iobase + UART_LCR); /* Set DLAB */ outb(divisor & 0xff, iobase + UART_DLL); /* Set speed */ outb(divisor >> 8, iobase + UART_DLM); outb(lcr, iobase + UART_LCR); /* Set 8N1 */ outb(fcr, iobase + UART_FCR); /* Enable FIFO's */ /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI | UART_IER_THRI, iobase + UART_IER); IRDA_DEBUG(2, "%s() speed changed to: %d\n", __FUNCTION__, speed); } /* * Function smsc_ircc_hard_xmit_fir (skb, dev) * * Transmit the frame! * */ static int smsc_ircc_hard_xmit_fir(struct sk_buff *skb, struct net_device *dev) { struct smsc_ircc_cb *self; unsigned long flags; s32 speed; int mtt; IRDA_ASSERT(dev != NULL, return 0;); self = (struct smsc_ircc_cb *) dev->priv; IRDA_ASSERT(self != NULL, return 0;); netif_stop_queue(dev); /* Make sure test of self->io.speed & speed change are atomic */ spin_lock_irqsave(&self->lock, flags); /* Check if we need to change the speed after this frame */ speed = irda_get_next_speed(skb); if (speed != self->io.speed && speed != -1) { /* Check for empty frame */ if (!skb->len) { /* Note : you should make sure that speed changes * are not going to corrupt any outgoing frame. * Look at nsc-ircc for the gory details - Jean II */ smsc_ircc_change_speed(self, speed); spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; } self->new_speed = speed; } memcpy(self->tx_buff.head, skb->data, skb->len); self->tx_buff.len = skb->len; self->tx_buff.data = self->tx_buff.head; mtt = irda_get_mtt(skb); if (mtt) { int bofs; /* * Compute how many BOFs (STA or PA's) we need to waste the * min turn time given the speed of the link. */ bofs = mtt * (self->io.speed / 1000) / 8000; if (bofs > 4095) bofs = 4095; smsc_ircc_dma_xmit(self, bofs); } else { /* Transmit frame */ smsc_ircc_dma_xmit(self, 0); } spin_unlock_irqrestore(&self->lock, flags); dev_kfree_skb(skb); return 0; } /* * Function smsc_ircc_dma_xmit (self, bofs) * * Transmit data using DMA * */ static void smsc_ircc_dma_xmit(struct smsc_ircc_cb *self, int bofs) { int iobase = self->io.fir_base; u8 ctrl; IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 1 /* Disable Rx */ register_bank(iobase, 0); outb(0x00, iobase + IRCC_LCR_B); #endif register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, iobase + IRCC_SCE_CFGB); self->io.direction = IO_XMIT; /* Set BOF additional count for generating the min turn time */ register_bank(iobase, 4); outb(bofs & 0xff, iobase + IRCC_BOF_COUNT_LO); ctrl = inb(iobase + IRCC_CONTROL) & 0xf0; outb(ctrl | ((bofs >> 8) & 0x0f), iobase + IRCC_BOF_COUNT_HI); /* Set max Tx frame size */ outb(self->tx_buff.len >> 8, iobase + IRCC_TX_SIZE_HI); outb(self->tx_buff.len & 0xff, iobase + IRCC_TX_SIZE_LO); /*outb(UART_MCR_OUT2, self->io.sir_base + UART_MCR);*/ /* Enable burst mode chip Tx DMA */ register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); /* Setup DMA controller (must be done after enabling chip DMA) */ irda_setup_dma(self->io.dma, self->tx_buff_dma, self->tx_buff.len, DMA_TX_MODE); /* Enable interrupt */ register_bank(iobase, 0); outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); /* Enable transmit */ outb(IRCC_LCR_B_SCE_TRANSMIT | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B); } /* * Function smsc_ircc_dma_xmit_complete (self) * * The transfer of a frame in finished. This function will only be called * by the interrupt handler * */ static void smsc_ircc_dma_xmit_complete(struct smsc_ircc_cb *self) { int iobase = self->io.fir_base; IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 0 /* Disable Tx */ register_bank(iobase, 0); outb(0x00, iobase + IRCC_LCR_B); #endif register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, iobase + IRCC_SCE_CFGB); /* Check for underrun! */ register_bank(iobase, 0); if (inb(iobase + IRCC_LSR) & IRCC_LSR_UNDERRUN) { self->stats.tx_errors++; self->stats.tx_fifo_errors++; /* Reset error condition */ register_bank(iobase, 0); outb(IRCC_MASTER_ERROR_RESET, iobase + IRCC_MASTER); outb(0x00, iobase + IRCC_MASTER); } else { self->stats.tx_packets++; self->stats.tx_bytes += self->tx_buff.len; } /* Check if it's time to change the speed */ if (self->new_speed) { smsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; } netif_wake_queue(self->netdev); } /* * Function smsc_ircc_dma_receive(self) * * Get ready for receiving a frame. The device will initiate a DMA * if it starts to receive a frame. * */ static int smsc_ircc_dma_receive(struct smsc_ircc_cb *self) { int iobase = self->io.fir_base; #if 0 /* Turn off chip DMA */ register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, iobase + IRCC_SCE_CFGB); #endif /* Disable Tx */ register_bank(iobase, 0); outb(0x00, iobase + IRCC_LCR_B); /* Turn off chip DMA */ register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) & ~IRCC_CFGB_DMA_ENABLE, iobase + IRCC_SCE_CFGB); self->io.direction = IO_RECV; self->rx_buff.data = self->rx_buff.head; /* Set max Rx frame size */ register_bank(iobase, 4); outb((2050 >> 8) & 0x0f, iobase + IRCC_RX_SIZE_HI); outb(2050 & 0xff, iobase + IRCC_RX_SIZE_LO); /* Setup DMA controller */ irda_setup_dma(self->io.dma, self->rx_buff_dma, self->rx_buff.truesize, DMA_RX_MODE); /* Enable burst mode chip Rx DMA */ register_bank(iobase, 1); outb(inb(iobase + IRCC_SCE_CFGB) | IRCC_CFGB_DMA_ENABLE | IRCC_CFGB_DMA_BURST, iobase + IRCC_SCE_CFGB); /* Enable interrupt */ register_bank(iobase, 0); outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); outb(IRCC_MASTER_INT_EN, iobase + IRCC_MASTER); /* Enable receiver */ register_bank(iobase, 0); outb(IRCC_LCR_B_SCE_RECEIVE | IRCC_LCR_B_SIP_ENABLE, iobase + IRCC_LCR_B); return 0; } /* * Function smsc_ircc_dma_receive_complete(self) * * Finished with receiving frames * */ static void smsc_ircc_dma_receive_complete(struct smsc_ircc_cb *self) { struct sk_buff *skb; int len, msgcnt, lsr; int iobase = self->io.fir_base; register_bank(iobase, 0); IRDA_DEBUG(3, "%s\n", __FUNCTION__); #if 0 /* Disable Rx */ register_bank(iobase, 0); outb(0x00, iobase + IRCC_LCR_B); #endif register_bank(iobase, 0); outb(inb(iobase + IRCC_LSAR) & ~IRCC_LSAR_ADDRESS_MASK, iobase + IRCC_LSAR); lsr= inb(iobase + IRCC_LSR); msgcnt = inb(iobase + IRCC_LCR_B) & 0x08; IRDA_DEBUG(2, "%s: dma count = %d\n", __FUNCTION__, get_dma_residue(self->io.dma)); len = self->rx_buff.truesize - get_dma_residue(self->io.dma); /* Look for errors */ if (lsr & (IRCC_LSR_FRAME_ERROR | IRCC_LSR_CRC_ERROR | IRCC_LSR_SIZE_ERROR)) { self->stats.rx_errors++; if (lsr & IRCC_LSR_FRAME_ERROR) self->stats.rx_frame_errors++; if (lsr & IRCC_LSR_CRC_ERROR) self->stats.rx_crc_errors++; if (lsr & IRCC_LSR_SIZE_ERROR) self->stats.rx_length_errors++; if (lsr & (IRCC_LSR_UNDERRUN | IRCC_LSR_OVERRUN)) self->stats.rx_length_errors++; return; } /* Remove CRC */ len -= self->io.speed < 4000000 ? 2 : 4; if (len < 2 || len > 2050) { IRDA_WARNING("%s(), bogus len=%d\n", __FUNCTION__, len); return; } IRDA_DEBUG(2, "%s: msgcnt = %d, len=%d\n", __FUNCTION__, msgcnt, len); skb = dev_alloc_skb(len + 1); if (!skb) { IRDA_WARNING("%s(), memory squeeze, dropping frame.\n", __FUNCTION__); return; } /* Make sure IP header gets aligned */ skb_reserve(skb, 1); memcpy(skb_put(skb, len), self->rx_buff.data, len); self->stats.rx_packets++; self->stats.rx_bytes += len; skb->dev = self->netdev; skb->mac.raw = skb->data; skb->protocol = htons(ETH_P_IRDA); netif_rx(skb); } /* * Function smsc_ircc_sir_receive (self) * * Receive one frame from the infrared port * */ static void smsc_ircc_sir_receive(struct smsc_ircc_cb *self) { int boguscount = 0; int iobase; IRDA_ASSERT(self != NULL, return;); iobase = self->io.sir_base; /* * Receive all characters in Rx FIFO, unwrap and unstuff them. * async_unwrap_char will deliver all found frames */ do { async_unwrap_char(self->netdev, &self->stats, &self->rx_buff, inb(iobase + UART_RX)); /* Make sure we don't stay here to long */ if (boguscount++ > 32) { IRDA_DEBUG(2, "%s(), breaking!\n", __FUNCTION__); break; } } while (inb(iobase + UART_LSR) & UART_LSR_DR); } /* * Function smsc_ircc_interrupt (irq, dev_id, regs) * * An interrupt from the chip has arrived. Time to do some work * */ static irqreturn_t smsc_ircc_interrupt(int irq, void *dev_id, struct pt_regs *regs) { struct net_device *dev = (struct net_device *) dev_id; struct smsc_ircc_cb *self; int iobase, iir, lcra, lsr; irqreturn_t ret = IRQ_NONE; if (dev == NULL) { printk(KERN_WARNING "%s: irq %d for unknown device.\n", driver_name, irq); goto irq_ret; } self = (struct smsc_ircc_cb *) dev->priv; IRDA_ASSERT(self != NULL, return IRQ_NONE;); /* Serialise the interrupt handler in various CPUs, stop Tx path */ spin_lock(&self->lock); /* Check if we should use the SIR interrupt handler */ if (self->io.speed <= SMSC_IRCC2_MAX_SIR_SPEED) { ret = smsc_ircc_interrupt_sir(dev); goto irq_ret_unlock; } iobase = self->io.fir_base; register_bank(iobase, 0); iir = inb(iobase + IRCC_IIR); if (iir == 0) goto irq_ret_unlock; ret = IRQ_HANDLED; /* Disable interrupts */ outb(0, iobase + IRCC_IER); lcra = inb(iobase + IRCC_LCR_A); lsr = inb(iobase + IRCC_LSR); IRDA_DEBUG(2, "%s(), iir = 0x%02x\n", __FUNCTION__, iir); if (iir & IRCC_IIR_EOM) { if (self->io.direction == IO_RECV) smsc_ircc_dma_receive_complete(self); else smsc_ircc_dma_xmit_complete(self); smsc_ircc_dma_receive(self); } if (iir & IRCC_IIR_ACTIVE_FRAME) { /*printk(KERN_WARNING "%s(): Active Frame\n", __FUNCTION__);*/ } /* Enable interrupts again */ register_bank(iobase, 0); outb(IRCC_IER_ACTIVE_FRAME | IRCC_IER_EOM, iobase + IRCC_IER); irq_ret_unlock: spin_unlock(&self->lock); irq_ret: return ret; } /* * Function irport_interrupt_sir (irq, dev_id, regs) * * Interrupt handler for SIR modes */ static irqreturn_t smsc_ircc_interrupt_sir(struct net_device *dev) { struct smsc_ircc_cb *self = dev->priv; int boguscount = 0; int iobase; int iir, lsr; /* Already locked comming here in smsc_ircc_interrupt() */ /*spin_lock(&self->lock);*/ iobase = self->io.sir_base; iir = inb(iobase + UART_IIR) & UART_IIR_ID; if (iir == 0) return IRQ_NONE; while (iir) { /* Clear interrupt */ lsr = inb(iobase + UART_LSR); IRDA_DEBUG(4, "%s(), iir=%02x, lsr=%02x, iobase=%#x\n", __FUNCTION__, iir, lsr, iobase); switch (iir) { case UART_IIR_RLSI: IRDA_DEBUG(2, "%s(), RLSI\n", __FUNCTION__); break; case UART_IIR_RDI: /* Receive interrupt */ smsc_ircc_sir_receive(self); break; case UART_IIR_THRI: if (lsr & UART_LSR_THRE) /* Transmitter ready for data */ smsc_ircc_sir_write_wakeup(self); break; default: IRDA_DEBUG(0, "%s(), unhandled IIR=%#x\n", __FUNCTION__, iir); break; } /* Make sure we don't stay here to long */ if (boguscount++ > 100) break; iir = inb(iobase + UART_IIR) & UART_IIR_ID; } /*spin_unlock(&self->lock);*/ return IRQ_HANDLED; } #if 0 /* unused */ /* * Function ircc_is_receiving (self) * * Return TRUE is we are currently receiving a frame * */ static int ircc_is_receiving(struct smsc_ircc_cb *self) { int status = FALSE; /* int iobase; */ IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(self != NULL, return FALSE;); IRDA_DEBUG(0, "%s: dma count = %d\n", __FUNCTION__, get_dma_residue(self->io.dma)); status = (self->rx_buff.state != OUTSIDE_FRAME); return status; } #endif /* unused */ /* * Function smsc_ircc_net_open (dev) * * Start the device * */ static int smsc_ircc_net_open(struct net_device *dev) { struct smsc_ircc_cb *self; char hwname[16]; unsigned long flags; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct smsc_ircc_cb *) dev->priv; IRDA_ASSERT(self != NULL, return 0;); if (request_irq(self->io.irq, smsc_ircc_interrupt, 0, dev->name, (void *) dev)) { IRDA_DEBUG(0, "%s(), unable to allocate irq=%d\n", __FUNCTION__, self->io.irq); return -EAGAIN; } spin_lock_irqsave(&self->lock, flags); /*smsc_ircc_sir_start(self);*/ self->io.speed = 0; smsc_ircc_change_speed(self, SMSC_IRCC2_C_IRDA_FALLBACK_SPEED); spin_unlock_irqrestore(&self->lock, flags); /* Give self a hardware name */ /* It would be cool to offer the chip revision here - Jean II */ sprintf(hwname, "SMSC @ 0x%03x", self->io.fir_base); /* * Open new IrLAP layer instance, now that everything should be * initialized properly */ self->irlap = irlap_open(dev, &self->qos, hwname); /* * Always allocate the DMA channel after the IRQ, * and clean up on failure. */ if (request_dma(self->io.dma, dev->name)) { smsc_ircc_net_close(dev); IRDA_WARNING("%s(), unable to allocate DMA=%d\n", __FUNCTION__, self->io.dma); return -EAGAIN; } netif_start_queue(dev); return 0; } /* * Function smsc_ircc_net_close (dev) * * Stop the device * */ static int smsc_ircc_net_close(struct net_device *dev) { struct smsc_ircc_cb *self; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(dev != NULL, return -1;); self = (struct smsc_ircc_cb *) dev->priv; IRDA_ASSERT(self != NULL, return 0;); /* Stop device */ netif_stop_queue(dev); /* Stop and remove instance of IrLAP */ if (self->irlap) irlap_close(self->irlap); self->irlap = NULL; free_irq(self->io.irq, dev); disable_dma(self->io.dma); free_dma(self->io.dma); return 0; } static int smsc_ircc_suspend(struct device *dev, pm_message_t state, u32 level) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); IRDA_MESSAGE("%s, Suspending\n", driver_name); if (level == SUSPEND_DISABLE && !self->io.suspended) { smsc_ircc_net_close(self->netdev); self->io.suspended = 1; } return 0; } static int smsc_ircc_resume(struct device *dev, u32 level) { struct smsc_ircc_cb *self = dev_get_drvdata(dev); if (level == RESUME_ENABLE && self->io.suspended) { smsc_ircc_net_open(self->netdev); self->io.suspended = 0; IRDA_MESSAGE("%s, Waking up\n", driver_name); } return 0; } /* * Function smsc_ircc_close (self) * * Close driver instance * */ static int __exit smsc_ircc_close(struct smsc_ircc_cb *self) { int iobase; unsigned long flags; IRDA_DEBUG(1, "%s\n", __FUNCTION__); IRDA_ASSERT(self != NULL, return -1;); platform_device_unregister(self->pldev); /* Remove netdevice */ unregister_netdev(self->netdev); /* Make sure the irq handler is not exectuting */ spin_lock_irqsave(&self->lock, flags); /* Stop interrupts */ iobase = self->io.fir_base; register_bank(iobase, 0); outb(0, iobase + IRCC_IER); outb(IRCC_MASTER_RESET, iobase + IRCC_MASTER); outb(0x00, iobase + IRCC_MASTER); #if 0 /* Reset to SIR mode */ register_bank(iobase, 1); outb(IRCC_CFGA_IRDA_SIR_A|IRCC_CFGA_TX_POLARITY, iobase + IRCC_SCE_CFGA); outb(IRCC_CFGB_IR, iobase + IRCC_SCE_CFGB); #endif spin_unlock_irqrestore(&self->lock, flags); /* Release the PORTS that this driver is using */ IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, self->io.fir_base); release_region(self->io.fir_base, self->io.fir_ext); IRDA_DEBUG(0, "%s(), releasing 0x%03x\n", __FUNCTION__, self->io.sir_base); release_region(self->io.sir_base, self->io.sir_ext); if (self->tx_buff.head) dma_free_coherent(NULL, self->tx_buff.truesize, self->tx_buff.head, self->tx_buff_dma); if (self->rx_buff.head) dma_free_coherent(NULL, self->rx_buff.truesize, self->rx_buff.head, self->rx_buff_dma); free_netdev(self->netdev); return 0; } static void __exit smsc_ircc_cleanup(void) { int i; IRDA_DEBUG(1, "%s\n", __FUNCTION__); for (i = 0; i < 2; i++) { if (dev_self[i]) smsc_ircc_close(dev_self[i]); } driver_unregister(&smsc_ircc_driver); } /* * Start SIR operations * * This function *must* be called with spinlock held, because it may * be called from the irq handler (via smsc_ircc_change_speed()). - Jean II */ void smsc_ircc_sir_start(struct smsc_ircc_cb *self) { struct net_device *dev; int fir_base, sir_base; IRDA_DEBUG(3, "%s\n", __FUNCTION__); IRDA_ASSERT(self != NULL, return;); dev = self->netdev; IRDA_ASSERT(dev != NULL, return;); dev->hard_start_xmit = &smsc_ircc_hard_xmit_sir; fir_base = self->io.fir_base; sir_base = self->io.sir_base; /* Reset everything */ outb(IRCC_MASTER_RESET, fir_base + IRCC_MASTER); #if SMSC_IRCC2_C_SIR_STOP /*smsc_ircc_sir_stop(self);*/ #endif register_bank(fir_base, 1); outb(((inb(fir_base + IRCC_SCE_CFGA) & IRCC_SCE_CFGA_BLOCK_CTRL_BITS_MASK) | IRCC_CFGA_IRDA_SIR_A), fir_base + IRCC_SCE_CFGA); /* Initialize UART */ outb(UART_LCR_WLEN8, sir_base + UART_LCR); /* Reset DLAB */ outb((UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2), sir_base + UART_MCR); /* Turn on interrups */ outb(UART_IER_RLSI | UART_IER_RDI |UART_IER_THRI, sir_base + UART_IER); IRDA_DEBUG(3, "%s() - exit\n", __FUNCTION__); outb(0x00, fir_base + IRCC_MASTER); } #if SMSC_IRCC2_C_SIR_STOP void smsc_ircc_sir_stop(struct smsc_ircc_cb *self) { int iobase; IRDA_DEBUG(3, "%s\n", __FUNCTION__); iobase = self->io.sir_base; /* Reset UART */ outb(0, iobase + UART_MCR); /* Turn off interrupts */ outb(0, iobase + UART_IER); } #endif /* * Function smsc_sir_write_wakeup (self) * * Called by the SIR interrupt handler when there's room for more data. * If we have more packets to send, we send them here. * */ static void smsc_ircc_sir_write_wakeup(struct smsc_ircc_cb *self) { int actual = 0; int iobase; int fcr; IRDA_ASSERT(self != NULL, return;); IRDA_DEBUG(4, "%s\n", __FUNCTION__); iobase = self->io.sir_base; /* Finished with frame? */ if (self->tx_buff.len > 0) { /* Write data left in transmit buffer */ actual = smsc_ircc_sir_write(iobase, self->io.fifo_size, self->tx_buff.data, self->tx_buff.len); self->tx_buff.data += actual; self->tx_buff.len -= actual; } else { /*if (self->tx_buff.len ==0) {*/ /* * Now serial buffer is almost free & we can start * transmission of another packet. But first we must check * if we need to change the speed of the hardware */ if (self->new_speed) { IRDA_DEBUG(5, "%s(), Changing speed to %d.\n", __FUNCTION__, self->new_speed); smsc_ircc_sir_wait_hw_transmitter_finish(self); smsc_ircc_change_speed(self, self->new_speed); self->new_speed = 0; } else { /* Tell network layer that we want more frames */ netif_wake_queue(self->netdev); } self->stats.tx_packets++; if (self->io.speed <= 115200) { /* * Reset Rx FIFO to make sure that all reflected transmit data * is discarded. This is needed for half duplex operation */ fcr = UART_FCR_ENABLE_FIFO | UART_FCR_CLEAR_RCVR; fcr |= self->io.speed < 38400 ? UART_FCR_TRIGGER_1 : UART_FCR_TRIGGER_14; outb(fcr, iobase + UART_FCR); /* Turn on receive interrupts */ outb(UART_IER_RDI, iobase + UART_IER); } } } /* * Function smsc_ircc_sir_write (iobase, fifo_size, buf, len) * * Fill Tx FIFO with transmit data * */ static int smsc_ircc_sir_write(int iobase, int fifo_size, __u8 *buf, int len) { int actual = 0; /* Tx FIFO should be empty! */ if (!(inb(iobase + UART_LSR) & UART_LSR_THRE)) { IRDA_WARNING("%s(), failed, fifo not empty!\n", __FUNCTION__); return 0; } /* Fill FIFO with current frame */ while (fifo_size-- > 0 && actual < len) { /* Transmit next byte */ outb(buf[actual], iobase + UART_TX); actual++; } return actual; } /* * Function smsc_ircc_is_receiving (self) * * Returns true is we are currently receiving data * */ static int smsc_ircc_is_receiving(struct smsc_ircc_cb *self) { return (self->rx_buff.state != OUTSIDE_FRAME); } /* * Function smsc_ircc_probe_transceiver(self) * * Tries to find the used Transceiver * */ static void smsc_ircc_probe_transceiver(struct smsc_ircc_cb *self) { unsigned int i; IRDA_ASSERT(self != NULL, return;); for (i = 0; smsc_transceivers[i].name != NULL; i++) if (smsc_transceivers[i].probe(self->io.fir_base)) { IRDA_MESSAGE(" %s transceiver found\n", smsc_transceivers[i].name); self->transceiver= i + 1; return; } IRDA_MESSAGE("No transceiver found. Defaulting to %s\n", smsc_transceivers[SMSC_IRCC2_C_DEFAULT_TRANSCEIVER].name); self->transceiver = SMSC_IRCC2_C_DEFAULT_TRANSCEIVER; } /* * Function smsc_ircc_set_transceiver_for_speed(self, speed) * * Set the transceiver according to the speed * */ static void smsc_ircc_set_transceiver_for_speed(struct smsc_ircc_cb *self, u32 speed) { unsigned int trx; trx = self->transceiver; if (trx > 0) smsc_transceivers[trx - 1].set_for_speed(self->io.fir_base, speed); } /* * Function smsc_ircc_wait_hw_transmitter_finish () * * Wait for the real end of HW transmission * * The UART is a strict FIFO, and we get called only when we have finished * pushing data to the FIFO, so the maximum amount of time we must wait * is only for the FIFO to drain out. * * We use a simple calibrated loop. We may need to adjust the loop * delay (udelay) to balance I/O traffic and latency. And we also need to * adjust the maximum timeout. * It would probably be better to wait for the proper interrupt, * but it doesn't seem to be available. * * We can't use jiffies or kernel timers because : * 1) We are called from the interrupt handler, which disable softirqs, * so jiffies won't be increased * 2) Jiffies granularity is usually very coarse (10ms), and we don't * want to wait that long to detect stuck hardware. * Jean II */ static void smsc_ircc_sir_wait_hw_transmitter_finish(struct smsc_ircc_cb *self) { int iobase = self->io.sir_base; int count = SMSC_IRCC2_HW_TRANSMITTER_TIMEOUT_US; /* Calibrated busy loop */ while (count-- > 0 && !(inb(iobase + UART_LSR) & UART_LSR_TEMT)) udelay(1); if (count == 0) IRDA_DEBUG(0, "%s(): stuck transmitter\n", __FUNCTION__); } /* PROBING * * */ static int __init smsc_ircc_look_for_chips(void) { struct smsc_chip_address *address; char *type; unsigned int cfg_base, found; found = 0; address = possible_addresses; while (address->cfg_base) { cfg_base = address->cfg_base; /*printk(KERN_WARNING "%s(): probing: 0x%02x for: 0x%02x\n", __FUNCTION__, cfg_base, address->type);*/ if (address->type & SMSCSIO_TYPE_FDC) { type = "FDC"; if (address->type & SMSCSIO_TYPE_FLAT) if (!smsc_superio_flat(fdc_chips_flat, cfg_base, type)) found++; if (address->type & SMSCSIO_TYPE_PAGED) if (!smsc_superio_paged(fdc_chips_paged, cfg_base, type)) found++; } if (address->type & SMSCSIO_TYPE_LPC) { type = "LPC"; if (address->type & SMSCSIO_TYPE_FLAT) if (!smsc_superio_flat(lpc_chips_flat, cfg_base, type)) found++; if (address->type & SMSCSIO_TYPE_PAGED) if (!smsc_superio_paged(lpc_chips_paged, cfg_base, type)) found++; } address++; } return found; } /* * Function smsc_superio_flat (chip, base, type) * * Try to get configuration of a smc SuperIO chip with flat register model * */ static int __init smsc_superio_flat(const struct smsc_chip *chips, unsigned short cfgbase, char *type) { unsigned short firbase, sirbase; u8 mode, dma, irq; int ret = -ENODEV; IRDA_DEBUG(1, "%s\n", __FUNCTION__); if (smsc_ircc_probe(cfgbase, SMSCSIOFLAT_DEVICEID_REG, chips, type) == NULL) return ret; outb(SMSCSIOFLAT_UARTMODE0C_REG, cfgbase); mode = inb(cfgbase + 1); /*printk(KERN_WARNING "%s(): mode: 0x%02x\n", __FUNCTION__, mode);*/ if (!(mode & SMSCSIOFLAT_UART2MODE_VAL_IRDA)) IRDA_WARNING("%s(): IrDA not enabled\n", __FUNCTION__); outb(SMSCSIOFLAT_UART2BASEADDR_REG, cfgbase); sirbase = inb(cfgbase + 1) << 2; /* FIR iobase */ outb(SMSCSIOFLAT_FIRBASEADDR_REG, cfgbase); firbase = inb(cfgbase + 1) << 3; /* DMA */ outb(SMSCSIOFLAT_FIRDMASELECT_REG, cfgbase); dma = inb(cfgbase + 1) & SMSCSIOFLAT_FIRDMASELECT_MASK; /* IRQ */ outb(SMSCSIOFLAT_UARTIRQSELECT_REG, cfgbase); irq = inb(cfgbase + 1) & SMSCSIOFLAT_UART2IRQSELECT_MASK; IRDA_MESSAGE("%s(): fir: 0x%02x, sir: 0x%02x, dma: %02d, irq: %d, mode: 0x%02x\n", __FUNCTION__, firbase, sirbase, dma, irq, mode); if (firbase && smsc_ircc_open(firbase, sirbase, dma, irq) == 0) ret = 0; /* Exit configuration */ outb(SMSCSIO_CFGEXITKEY, cfgbase); return ret; } /* * Function smsc_superio_paged (chip, base, type) * * Try to get configuration of a smc SuperIO chip with paged register model * */ static int __init smsc_superio_paged(const struct smsc_chip *chips, unsigned short cfg_base, char *type) { unsigned short fir_io, sir_io; int ret = -ENODEV; IRDA_DEBUG(1, "%s\n", __FUNCTION__); if (smsc_ircc_probe(cfg_base, 0x20, chips, type) == NULL) return ret; /* Select logical device (UART2) */ outb(0x07, cfg_base); outb(0x05, cfg_base + 1); /* SIR iobase */ outb(0x60, cfg_base); sir_io = inb(cfg_base + 1) << 8; outb(0x61, cfg_base); sir_io |= inb(cfg_base + 1); /* Read FIR base */ outb(0x62, cfg_base); fir_io = inb(cfg_base + 1) << 8; outb(0x63, cfg_base); fir_io |= inb(cfg_base + 1); outb(0x2b, cfg_base); /* ??? */ if (fir_io && smsc_ircc_open(fir_io, sir_io, ircc_dma, ircc_irq) == 0) ret = 0; /* Exit configuration */ outb(SMSCSIO_CFGEXITKEY, cfg_base); return ret; } static int __init smsc_access(unsigned short cfg_base, unsigned char reg) { IRDA_DEBUG(1, "%s\n", __FUNCTION__); outb(reg, cfg_base); return inb(cfg_base) != reg ? -1 : 0; } static const struct smsc_chip * __init smsc_ircc_probe(unsigned short cfg_base, u8 reg, const struct smsc_chip *chip, char *type) { u8 devid, xdevid, rev; IRDA_DEBUG(1, "%s\n", __FUNCTION__); /* Leave configuration */ outb(SMSCSIO_CFGEXITKEY, cfg_base); if (inb(cfg_base) == SMSCSIO_CFGEXITKEY) /* not a smc superio chip */ return NULL; outb(reg, cfg_base); xdevid = inb(cfg_base + 1); /* Enter configuration */ outb(SMSCSIO_CFGACCESSKEY, cfg_base); #if 0 if (smsc_access(cfg_base,0x55)) /* send second key and check */ return NULL; #endif /* probe device ID */ if (smsc_access(cfg_base, reg)) return NULL; devid = inb(cfg_base + 1); if (devid == 0 || devid == 0xff) /* typical values for unused port */ return NULL; /* probe revision ID */ if (smsc_access(cfg_base, reg + 1)) return NULL; rev = inb(cfg_base + 1); if (rev >= 128) /* i think this will make no sense */ return NULL; if (devid == xdevid) /* protection against false positives */ return NULL; /* Check for expected device ID; are there others? */ while (chip->devid != devid) { chip++; if (chip->name == NULL) return NULL; } IRDA_MESSAGE("found SMC SuperIO Chip (devid=0x%02x rev=%02X base=0x%04x): %s%s\n", devid, rev, cfg_base, type, chip->name); if (chip->rev > rev) { IRDA_MESSAGE("Revision higher than expected\n"); return NULL; } if (chip->flags & NoIRDA) IRDA_MESSAGE("chipset does not support IRDA\n"); return chip; } static int __init smsc_superio_fdc(unsigned short cfg_base) { int ret = -1; if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", __FUNCTION__, cfg_base); } else { if (!smsc_superio_flat(fdc_chips_flat, cfg_base, "FDC") || !smsc_superio_paged(fdc_chips_paged, cfg_base, "FDC")) ret = 0; release_region(cfg_base, 2); } return ret; } static int __init smsc_superio_lpc(unsigned short cfg_base) { int ret = -1; if (!request_region(cfg_base, 2, driver_name)) { IRDA_WARNING("%s: can't get cfg_base of 0x%03x\n", __FUNCTION__, cfg_base); } else { if (!smsc_superio_flat(lpc_chips_flat, cfg_base, "LPC") || !smsc_superio_paged(lpc_chips_paged, cfg_base, "LPC")) ret = 0; release_region(cfg_base, 2); } return ret; } /************************************************ * * Transceivers specific functions * ************************************************/ /* * Function smsc_ircc_set_transceiver_smsc_ircc_atc(fir_base, speed) * * Program transceiver through smsc-ircc ATC circuitry * */ static void smsc_ircc_set_transceiver_smsc_ircc_atc(int fir_base, u32 speed) { unsigned long jiffies_now, jiffies_timeout; u8 val; jiffies_now = jiffies; jiffies_timeout = jiffies + SMSC_IRCC2_ATC_PROGRAMMING_TIMEOUT_JIFFIES; /* ATC */ register_bank(fir_base, 4); outb((inb(fir_base + IRCC_ATC) & IRCC_ATC_MASK) | IRCC_ATC_nPROGREADY|IRCC_ATC_ENABLE, fir_base + IRCC_ATC); while ((val = (inb(fir_base + IRCC_ATC) & IRCC_ATC_nPROGREADY)) && !time_after(jiffies, jiffies_timeout)) /* empty */; if (val) IRDA_WARNING("%s(): ATC: 0x%02x\n", __FUNCTION__, inb(fir_base + IRCC_ATC)); } /* * Function smsc_ircc_probe_transceiver_smsc_ircc_atc(fir_base) * * Probe transceiver smsc-ircc ATC circuitry * */ static int smsc_ircc_probe_transceiver_smsc_ircc_atc(int fir_base) { return 0; } /* * Function smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(self, speed) * * Set transceiver * */ static void smsc_ircc_set_transceiver_smsc_ircc_fast_pin_select(int fir_base, u32 speed) { u8 fast_mode; switch (speed) { default: case 576000 : fast_mode = 0; break; case 1152000 : case 4000000 : fast_mode = IRCC_LCR_A_FAST; break; } register_bank(fir_base, 0); outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); } /* * Function smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(fir_base) * * Probe transceiver * */ static int smsc_ircc_probe_transceiver_smsc_ircc_fast_pin_select(int fir_base) { return 0; } /* * Function smsc_ircc_set_transceiver_toshiba_sat1800(fir_base, speed) * * Set transceiver * */ static void smsc_ircc_set_transceiver_toshiba_sat1800(int fir_base, u32 speed) { u8 fast_mode; switch (speed) { default: case 576000 : fast_mode = 0; break; case 1152000 : case 4000000 : fast_mode = /*IRCC_LCR_A_FAST |*/ IRCC_LCR_A_GP_DATA; break; } /* This causes an interrupt */ register_bank(fir_base, 0); outb((inb(fir_base + IRCC_LCR_A) & 0xbf) | fast_mode, fir_base + IRCC_LCR_A); } /* * Function smsc_ircc_probe_transceiver_toshiba_sat1800(fir_base) * * Probe transceiver * */ static int smsc_ircc_probe_transceiver_toshiba_sat1800(int fir_base) { return 0; } module_init(smsc_ircc_init); module_exit(smsc_ircc_cleanup);