/* * Copyright © 2006-2010 Intel Corporation * Copyright (c) 2006 Dave Airlie * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER * DEALINGS IN THE SOFTWARE. * * Authors: * Eric Anholt * Dave Airlie * Jesse Barnes * Chris Wilson */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt #include #include "intel_drv.h" #define PCI_LBPC 0xf4 /* legacy/combination backlight modes */ void intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, struct drm_display_mode *adjusted_mode) { adjusted_mode->hdisplay = fixed_mode->hdisplay; adjusted_mode->hsync_start = fixed_mode->hsync_start; adjusted_mode->hsync_end = fixed_mode->hsync_end; adjusted_mode->htotal = fixed_mode->htotal; adjusted_mode->vdisplay = fixed_mode->vdisplay; adjusted_mode->vsync_start = fixed_mode->vsync_start; adjusted_mode->vsync_end = fixed_mode->vsync_end; adjusted_mode->vtotal = fixed_mode->vtotal; adjusted_mode->clock = fixed_mode->clock; } /* adjusted_mode has been preset to be the panel's fixed mode */ void intel_pch_panel_fitting(struct intel_crtc *intel_crtc, struct intel_crtc_config *pipe_config, int fitting_mode) { struct drm_display_mode *mode, *adjusted_mode; int x, y, width, height; mode = &pipe_config->requested_mode; adjusted_mode = &pipe_config->adjusted_mode; x = y = width = height = 0; /* Native modes don't need fitting */ if (adjusted_mode->hdisplay == mode->hdisplay && adjusted_mode->vdisplay == mode->vdisplay) goto done; switch (fitting_mode) { case DRM_MODE_SCALE_CENTER: width = mode->hdisplay; height = mode->vdisplay; x = (adjusted_mode->hdisplay - width + 1)/2; y = (adjusted_mode->vdisplay - height + 1)/2; break; case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the aspect ratio */ { u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay; u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay; if (scaled_width > scaled_height) { /* pillar */ width = scaled_height / mode->vdisplay; if (width & 1) width++; x = (adjusted_mode->hdisplay - width + 1) / 2; y = 0; height = adjusted_mode->vdisplay; } else if (scaled_width < scaled_height) { /* letter */ height = scaled_width / mode->hdisplay; if (height & 1) height++; y = (adjusted_mode->vdisplay - height + 1) / 2; x = 0; width = adjusted_mode->hdisplay; } else { x = y = 0; width = adjusted_mode->hdisplay; height = adjusted_mode->vdisplay; } } break; case DRM_MODE_SCALE_FULLSCREEN: x = y = 0; width = adjusted_mode->hdisplay; height = adjusted_mode->vdisplay; break; default: WARN(1, "bad panel fit mode: %d\n", fitting_mode); return; } done: pipe_config->pch_pfit.pos = (x << 16) | y; pipe_config->pch_pfit.size = (width << 16) | height; } static void centre_horizontally(struct drm_display_mode *mode, int width) { u32 border, sync_pos, blank_width, sync_width; /* keep the hsync and hblank widths constant */ sync_width = mode->crtc_hsync_end - mode->crtc_hsync_start; blank_width = mode->crtc_hblank_end - mode->crtc_hblank_start; sync_pos = (blank_width - sync_width + 1) / 2; border = (mode->hdisplay - width + 1) / 2; border += border & 1; /* make the border even */ mode->crtc_hdisplay = width; mode->crtc_hblank_start = width + border; mode->crtc_hblank_end = mode->crtc_hblank_start + blank_width; mode->crtc_hsync_start = mode->crtc_hblank_start + sync_pos; mode->crtc_hsync_end = mode->crtc_hsync_start + sync_width; } static void centre_vertically(struct drm_display_mode *mode, int height) { u32 border, sync_pos, blank_width, sync_width; /* keep the vsync and vblank widths constant */ sync_width = mode->crtc_vsync_end - mode->crtc_vsync_start; blank_width = mode->crtc_vblank_end - mode->crtc_vblank_start; sync_pos = (blank_width - sync_width + 1) / 2; border = (mode->vdisplay - height + 1) / 2; mode->crtc_vdisplay = height; mode->crtc_vblank_start = height + border; mode->crtc_vblank_end = mode->crtc_vblank_start + blank_width; mode->crtc_vsync_start = mode->crtc_vblank_start + sync_pos; mode->crtc_vsync_end = mode->crtc_vsync_start + sync_width; } static inline u32 panel_fitter_scaling(u32 source, u32 target) { /* * Floating point operation is not supported. So the FACTOR * is defined, which can avoid the floating point computation * when calculating the panel ratio. */ #define ACCURACY 12 #define FACTOR (1 << ACCURACY) u32 ratio = source * FACTOR / target; return (FACTOR * ratio + FACTOR/2) / FACTOR; } void intel_gmch_panel_fitting(struct intel_crtc *intel_crtc, struct intel_crtc_config *pipe_config, int fitting_mode) { struct drm_device *dev = intel_crtc->base.dev; u32 pfit_control = 0, pfit_pgm_ratios = 0, border = 0; struct drm_display_mode *mode, *adjusted_mode; mode = &pipe_config->requested_mode; adjusted_mode = &pipe_config->adjusted_mode; /* Native modes don't need fitting */ if (adjusted_mode->hdisplay == mode->hdisplay && adjusted_mode->vdisplay == mode->vdisplay) goto out; switch (fitting_mode) { case DRM_MODE_SCALE_CENTER: /* * For centered modes, we have to calculate border widths & * heights and modify the values programmed into the CRTC. */ centre_horizontally(adjusted_mode, mode->hdisplay); centre_vertically(adjusted_mode, mode->vdisplay); border = LVDS_BORDER_ENABLE; break; case DRM_MODE_SCALE_ASPECT: /* Scale but preserve the aspect ratio */ if (INTEL_INFO(dev)->gen >= 4) { u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay; u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay; /* 965+ is easy, it does everything in hw */ if (scaled_width > scaled_height) pfit_control |= PFIT_ENABLE | PFIT_SCALING_PILLAR; else if (scaled_width < scaled_height) pfit_control |= PFIT_ENABLE | PFIT_SCALING_LETTER; else if (adjusted_mode->hdisplay != mode->hdisplay) pfit_control |= PFIT_ENABLE | PFIT_SCALING_AUTO; } else { u32 scaled_width = adjusted_mode->hdisplay * mode->vdisplay; u32 scaled_height = mode->hdisplay * adjusted_mode->vdisplay; /* * For earlier chips we have to calculate the scaling * ratio by hand and program it into the * PFIT_PGM_RATIO register */ if (scaled_width > scaled_height) { /* pillar */ centre_horizontally(adjusted_mode, scaled_height / mode->vdisplay); border = LVDS_BORDER_ENABLE; if (mode->vdisplay != adjusted_mode->vdisplay) { u32 bits = panel_fitter_scaling(mode->vdisplay, adjusted_mode->vdisplay); pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | bits << PFIT_VERT_SCALE_SHIFT); pfit_control |= (PFIT_ENABLE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } else if (scaled_width < scaled_height) { /* letter */ centre_vertically(adjusted_mode, scaled_width / mode->hdisplay); border = LVDS_BORDER_ENABLE; if (mode->hdisplay != adjusted_mode->hdisplay) { u32 bits = panel_fitter_scaling(mode->hdisplay, adjusted_mode->hdisplay); pfit_pgm_ratios |= (bits << PFIT_HORIZ_SCALE_SHIFT | bits << PFIT_VERT_SCALE_SHIFT); pfit_control |= (PFIT_ENABLE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } else { /* Aspects match, Let hw scale both directions */ pfit_control |= (PFIT_ENABLE | VERT_AUTO_SCALE | HORIZ_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_INTERP_BILINEAR); } } break; case DRM_MODE_SCALE_FULLSCREEN: /* * Full scaling, even if it changes the aspect ratio. * Fortunately this is all done for us in hw. */ if (mode->vdisplay != adjusted_mode->vdisplay || mode->hdisplay != adjusted_mode->hdisplay) { pfit_control |= PFIT_ENABLE; if (INTEL_INFO(dev)->gen >= 4) pfit_control |= PFIT_SCALING_AUTO; else pfit_control |= (VERT_AUTO_SCALE | VERT_INTERP_BILINEAR | HORIZ_AUTO_SCALE | HORIZ_INTERP_BILINEAR); } break; default: WARN(1, "bad panel fit mode: %d\n", fitting_mode); return; } /* 965+ wants fuzzy fitting */ /* FIXME: handle multiple panels by failing gracefully */ if (INTEL_INFO(dev)->gen >= 4) pfit_control |= ((intel_crtc->pipe << PFIT_PIPE_SHIFT) | PFIT_FILTER_FUZZY); out: if ((pfit_control & PFIT_ENABLE) == 0) { pfit_control = 0; pfit_pgm_ratios = 0; } /* Make sure pre-965 set dither correctly for 18bpp panels. */ if (INTEL_INFO(dev)->gen < 4 && pipe_config->pipe_bpp == 18) pfit_control |= PANEL_8TO6_DITHER_ENABLE; if (pfit_control != pipe_config->gmch_pfit.control || pfit_pgm_ratios != pipe_config->gmch_pfit.pgm_ratios) { pipe_config->gmch_pfit.control = pfit_control; pipe_config->gmch_pfit.pgm_ratios = pfit_pgm_ratios; } pipe_config->gmch_pfit.lvds_border_bits = border; } static int is_backlight_combination_mode(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (INTEL_INFO(dev)->gen >= 4) return I915_READ(BLC_PWM_CTL2) & BLM_COMBINATION_MODE; if (IS_GEN2(dev)) return I915_READ(BLC_PWM_CTL) & BLM_LEGACY_MODE; return 0; } /* XXX: query mode clock or hardware clock and program max PWM appropriately * when it's 0. */ static u32 i915_read_blc_pwm_ctl(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 val; WARN_ON(!spin_is_locked(&dev_priv->backlight.lock)); /* Restore the CTL value if it lost, e.g. GPU reset */ if (HAS_PCH_SPLIT(dev_priv->dev)) { val = I915_READ(BLC_PWM_PCH_CTL2); if (dev_priv->regfile.saveBLC_PWM_CTL2 == 0) { dev_priv->regfile.saveBLC_PWM_CTL2 = val; } else if (val == 0) { val = dev_priv->regfile.saveBLC_PWM_CTL2; I915_WRITE(BLC_PWM_PCH_CTL2, val); } } else { val = I915_READ(BLC_PWM_CTL); if (dev_priv->regfile.saveBLC_PWM_CTL == 0) { dev_priv->regfile.saveBLC_PWM_CTL = val; if (INTEL_INFO(dev)->gen >= 4) dev_priv->regfile.saveBLC_PWM_CTL2 = I915_READ(BLC_PWM_CTL2); } else if (val == 0) { val = dev_priv->regfile.saveBLC_PWM_CTL; I915_WRITE(BLC_PWM_CTL, val); if (INTEL_INFO(dev)->gen >= 4) I915_WRITE(BLC_PWM_CTL2, dev_priv->regfile.saveBLC_PWM_CTL2); } } return val; } static u32 intel_panel_get_max_backlight(struct drm_device *dev) { u32 max; max = i915_read_blc_pwm_ctl(dev); if (HAS_PCH_SPLIT(dev)) { max >>= 16; } else { if (INTEL_INFO(dev)->gen < 4) max >>= 17; else max >>= 16; if (is_backlight_combination_mode(dev)) max *= 0xff; } DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max); return max; } static int i915_panel_invert_brightness; MODULE_PARM_DESC(invert_brightness, "Invert backlight brightness " "(-1 force normal, 0 machine defaults, 1 force inversion), please " "report PCI device ID, subsystem vendor and subsystem device ID " "to dri-devel@lists.freedesktop.org, if your machine needs it. " "It will then be included in an upcoming module version."); module_param_named(invert_brightness, i915_panel_invert_brightness, int, 0600); static u32 intel_panel_compute_brightness(struct drm_device *dev, u32 val) { struct drm_i915_private *dev_priv = dev->dev_private; if (i915_panel_invert_brightness < 0) return val; if (i915_panel_invert_brightness > 0 || dev_priv->quirks & QUIRK_INVERT_BRIGHTNESS) { u32 max = intel_panel_get_max_backlight(dev); if (max) return max - val; } return val; } static u32 intel_panel_get_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 val; unsigned long flags; spin_lock_irqsave(&dev_priv->backlight.lock, flags); if (HAS_PCH_SPLIT(dev)) { val = I915_READ(BLC_PWM_CPU_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; } else { val = I915_READ(BLC_PWM_CTL) & BACKLIGHT_DUTY_CYCLE_MASK; if (INTEL_INFO(dev)->gen < 4) val >>= 1; if (is_backlight_combination_mode(dev)) { u8 lbpc; pci_read_config_byte(dev->pdev, PCI_LBPC, &lbpc); val *= lbpc; } } val = intel_panel_compute_brightness(dev, val); spin_unlock_irqrestore(&dev_priv->backlight.lock, flags); DRM_DEBUG_DRIVER("get backlight PWM = %d\n", val); return val; } static void intel_pch_panel_set_backlight(struct drm_device *dev, u32 level) { struct drm_i915_private *dev_priv = dev->dev_private; u32 val = I915_READ(BLC_PWM_CPU_CTL) & ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_CPU_CTL, val | level); } static void intel_panel_actually_set_backlight(struct drm_device *dev, u32 level) { struct drm_i915_private *dev_priv = dev->dev_private; u32 tmp; DRM_DEBUG_DRIVER("set backlight PWM = %d\n", level); level = intel_panel_compute_brightness(dev, level); if (HAS_PCH_SPLIT(dev)) return intel_pch_panel_set_backlight(dev, level); if (is_backlight_combination_mode(dev)) { u32 max = intel_panel_get_max_backlight(dev); u8 lbpc; /* we're screwed, but keep behaviour backwards compatible */ if (!max) max = 1; lbpc = level * 0xfe / max + 1; level /= lbpc; pci_write_config_byte(dev->pdev, PCI_LBPC, lbpc); } tmp = I915_READ(BLC_PWM_CTL); if (INTEL_INFO(dev)->gen < 4) level <<= 1; tmp &= ~BACKLIGHT_DUTY_CYCLE_MASK; I915_WRITE(BLC_PWM_CTL, tmp | level); } /* set backlight brightness to level in range [0..max] */ void intel_panel_set_backlight(struct drm_device *dev, u32 level, u32 max) { struct drm_i915_private *dev_priv = dev->dev_private; u32 freq; unsigned long flags; spin_lock_irqsave(&dev_priv->backlight.lock, flags); freq = intel_panel_get_max_backlight(dev); if (!freq) { /* we are screwed, bail out */ goto out; } /* scale to hardware */ level = level * freq / max; dev_priv->backlight.level = level; if (dev_priv->backlight.device) dev_priv->backlight.device->props.brightness = level; if (dev_priv->backlight.enabled) intel_panel_actually_set_backlight(dev, level); out: spin_unlock_irqrestore(&dev_priv->backlight.lock, flags); } void intel_panel_disable_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; unsigned long flags; spin_lock_irqsave(&dev_priv->backlight.lock, flags); dev_priv->backlight.enabled = false; intel_panel_actually_set_backlight(dev, 0); if (INTEL_INFO(dev)->gen >= 4) { uint32_t reg, tmp; reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; I915_WRITE(reg, I915_READ(reg) & ~BLM_PWM_ENABLE); if (HAS_PCH_SPLIT(dev)) { tmp = I915_READ(BLC_PWM_PCH_CTL1); tmp &= ~BLM_PCH_PWM_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, tmp); } } spin_unlock_irqrestore(&dev_priv->backlight.lock, flags); } void intel_panel_enable_backlight(struct drm_device *dev, enum pipe pipe) { struct drm_i915_private *dev_priv = dev->dev_private; enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, pipe); unsigned long flags; spin_lock_irqsave(&dev_priv->backlight.lock, flags); if (dev_priv->backlight.level == 0) { dev_priv->backlight.level = intel_panel_get_max_backlight(dev); if (dev_priv->backlight.device) dev_priv->backlight.device->props.brightness = dev_priv->backlight.level; } if (INTEL_INFO(dev)->gen >= 4) { uint32_t reg, tmp; reg = HAS_PCH_SPLIT(dev) ? BLC_PWM_CPU_CTL2 : BLC_PWM_CTL2; tmp = I915_READ(reg); /* Note that this can also get called through dpms changes. And * we don't track the backlight dpms state, hence check whether * we have to do anything first. */ if (tmp & BLM_PWM_ENABLE) goto set_level; if (INTEL_INFO(dev)->num_pipes == 3) tmp &= ~BLM_PIPE_SELECT_IVB; else tmp &= ~BLM_PIPE_SELECT; if (cpu_transcoder == TRANSCODER_EDP) tmp |= BLM_TRANSCODER_EDP; else tmp |= BLM_PIPE(cpu_transcoder); tmp &= ~BLM_PWM_ENABLE; I915_WRITE(reg, tmp); POSTING_READ(reg); I915_WRITE(reg, tmp | BLM_PWM_ENABLE); if (HAS_PCH_SPLIT(dev)) { tmp = I915_READ(BLC_PWM_PCH_CTL1); tmp |= BLM_PCH_PWM_ENABLE; tmp &= ~BLM_PCH_OVERRIDE_ENABLE; I915_WRITE(BLC_PWM_PCH_CTL1, tmp); } } set_level: /* Call below after setting BLC_PWM_CPU_CTL2 and BLC_PWM_PCH_CTL1. * BLC_PWM_CPU_CTL may be cleared to zero automatically when these * registers are set. */ dev_priv->backlight.enabled = true; intel_panel_actually_set_backlight(dev, dev_priv->backlight.level); spin_unlock_irqrestore(&dev_priv->backlight.lock, flags); } static void intel_panel_init_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; dev_priv->backlight.level = intel_panel_get_backlight(dev); dev_priv->backlight.enabled = dev_priv->backlight.level != 0; } enum drm_connector_status intel_panel_detect(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; /* Assume that the BIOS does not lie through the OpRegion... */ if (!i915_panel_ignore_lid && dev_priv->opregion.lid_state) { return ioread32(dev_priv->opregion.lid_state) & 0x1 ? connector_status_connected : connector_status_disconnected; } switch (i915_panel_ignore_lid) { case -2: return connector_status_connected; case -1: return connector_status_disconnected; default: return connector_status_unknown; } } #ifdef CONFIG_BACKLIGHT_CLASS_DEVICE static int intel_panel_update_status(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); intel_panel_set_backlight(dev, bd->props.brightness, bd->props.max_brightness); return 0; } static int intel_panel_get_brightness(struct backlight_device *bd) { struct drm_device *dev = bl_get_data(bd); return intel_panel_get_backlight(dev); } static const struct backlight_ops intel_panel_bl_ops = { .update_status = intel_panel_update_status, .get_brightness = intel_panel_get_brightness, }; int intel_panel_setup_backlight(struct drm_connector *connector) { struct drm_device *dev = connector->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct backlight_properties props; unsigned long flags; intel_panel_init_backlight(dev); if (WARN_ON(dev_priv->backlight.device)) return -ENODEV; memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; props.brightness = dev_priv->backlight.level; spin_lock_irqsave(&dev_priv->backlight.lock, flags); props.max_brightness = intel_panel_get_max_backlight(dev); spin_unlock_irqrestore(&dev_priv->backlight.lock, flags); if (props.max_brightness == 0) { DRM_DEBUG_DRIVER("Failed to get maximum backlight value\n"); return -ENODEV; } dev_priv->backlight.device = backlight_device_register("intel_backlight", &connector->kdev, dev, &intel_panel_bl_ops, &props); if (IS_ERR(dev_priv->backlight.device)) { DRM_ERROR("Failed to register backlight: %ld\n", PTR_ERR(dev_priv->backlight.device)); dev_priv->backlight.device = NULL; return -ENODEV; } return 0; } void intel_panel_destroy_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; if (dev_priv->backlight.device) { backlight_device_unregister(dev_priv->backlight.device); dev_priv->backlight.device = NULL; } } #else int intel_panel_setup_backlight(struct drm_connector *connector) { intel_panel_init_backlight(connector->dev); return 0; } void intel_panel_destroy_backlight(struct drm_device *dev) { return; } #endif int intel_panel_init(struct intel_panel *panel, struct drm_display_mode *fixed_mode) { panel->fixed_mode = fixed_mode; return 0; } void intel_panel_fini(struct intel_panel *panel) { struct intel_connector *intel_connector = container_of(panel, struct intel_connector, panel); if (panel->fixed_mode) drm_mode_destroy(intel_connector->base.dev, panel->fixed_mode); }