/* Copyright (C) 2009 - 2010 Ivo van Doorn Copyright (C) 2009 Alban Browaeys Copyright (C) 2009 Felix Fietkau Copyright (C) 2009 Luis Correia Copyright (C) 2009 Mattias Nissler Copyright (C) 2009 Mark Asselstine Copyright (C) 2009 Xose Vazquez Perez Copyright (C) 2009 Bart Zolnierkiewicz This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ /* Module: rt2800pci Abstract: rt2800pci device specific routines. Supported chipsets: RT2800E & RT2800ED. */ #include #include #include #include #include #include #include #include #include "rt2x00.h" #include "rt2x00mmio.h" #include "rt2x00pci.h" #include "rt2x00soc.h" #include "rt2800lib.h" #include "rt2800mmio.h" #include "rt2800.h" #include "rt2800pci.h" /* * Allow hardware encryption to be disabled. */ static bool modparam_nohwcrypt = false; module_param_named(nohwcrypt, modparam_nohwcrypt, bool, S_IRUGO); MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption."); static bool rt2800pci_hwcrypt_disabled(struct rt2x00_dev *rt2x00dev) { return modparam_nohwcrypt; } static void rt2800pci_mcu_status(struct rt2x00_dev *rt2x00dev, const u8 token) { unsigned int i; u32 reg; /* * SOC devices don't support MCU requests. */ if (rt2x00_is_soc(rt2x00dev)) return; for (i = 0; i < 200; i++) { rt2x00mmio_register_read(rt2x00dev, H2M_MAILBOX_CID, ®); if ((rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD0) == token) || (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD1) == token) || (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD2) == token) || (rt2x00_get_field32(reg, H2M_MAILBOX_CID_CMD3) == token)) break; udelay(REGISTER_BUSY_DELAY); } if (i == 200) rt2x00_err(rt2x00dev, "MCU request failed, no response from hardware\n"); rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); } #ifdef CONFIG_PCI static void rt2800pci_eepromregister_read(struct eeprom_93cx6 *eeprom) { struct rt2x00_dev *rt2x00dev = eeprom->data; u32 reg; rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); eeprom->reg_data_in = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_IN); eeprom->reg_data_out = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_OUT); eeprom->reg_data_clock = !!rt2x00_get_field32(reg, E2PROM_CSR_DATA_CLOCK); eeprom->reg_chip_select = !!rt2x00_get_field32(reg, E2PROM_CSR_CHIP_SELECT); } static void rt2800pci_eepromregister_write(struct eeprom_93cx6 *eeprom) { struct rt2x00_dev *rt2x00dev = eeprom->data; u32 reg = 0; rt2x00_set_field32(®, E2PROM_CSR_DATA_IN, !!eeprom->reg_data_in); rt2x00_set_field32(®, E2PROM_CSR_DATA_OUT, !!eeprom->reg_data_out); rt2x00_set_field32(®, E2PROM_CSR_DATA_CLOCK, !!eeprom->reg_data_clock); rt2x00_set_field32(®, E2PROM_CSR_CHIP_SELECT, !!eeprom->reg_chip_select); rt2x00mmio_register_write(rt2x00dev, E2PROM_CSR, reg); } static int rt2800pci_read_eeprom_pci(struct rt2x00_dev *rt2x00dev) { struct eeprom_93cx6 eeprom; u32 reg; rt2x00mmio_register_read(rt2x00dev, E2PROM_CSR, ®); eeprom.data = rt2x00dev; eeprom.register_read = rt2800pci_eepromregister_read; eeprom.register_write = rt2800pci_eepromregister_write; switch (rt2x00_get_field32(reg, E2PROM_CSR_TYPE)) { case 0: eeprom.width = PCI_EEPROM_WIDTH_93C46; break; case 1: eeprom.width = PCI_EEPROM_WIDTH_93C66; break; default: eeprom.width = PCI_EEPROM_WIDTH_93C86; break; } eeprom.reg_data_in = 0; eeprom.reg_data_out = 0; eeprom.reg_data_clock = 0; eeprom.reg_chip_select = 0; eeprom_93cx6_multiread(&eeprom, EEPROM_BASE, rt2x00dev->eeprom, EEPROM_SIZE / sizeof(u16)); return 0; } static int rt2800pci_efuse_detect(struct rt2x00_dev *rt2x00dev) { return rt2800_efuse_detect(rt2x00dev); } static inline int rt2800pci_read_eeprom_efuse(struct rt2x00_dev *rt2x00dev) { return rt2800_read_eeprom_efuse(rt2x00dev); } /* * Firmware functions */ static char *rt2800pci_get_firmware_name(struct rt2x00_dev *rt2x00dev) { /* * Chip rt3290 use specific 4KB firmware named rt3290.bin. */ if (rt2x00_rt(rt2x00dev, RT3290)) return FIRMWARE_RT3290; else return FIRMWARE_RT2860; } static int rt2800pci_write_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { u32 reg; /* * enable Host program ram write selection */ reg = 0; rt2x00_set_field32(®, PBF_SYS_CTRL_HOST_RAM_WRITE, 1); rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, reg); /* * Write firmware to device. */ rt2x00mmio_register_multiwrite(rt2x00dev, FIRMWARE_IMAGE_BASE, data, len); rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00000); rt2x00mmio_register_write(rt2x00dev, PBF_SYS_CTRL, 0x00001); rt2x00mmio_register_write(rt2x00dev, H2M_BBP_AGENT, 0); rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); return 0; } #endif /* CONFIG_PCI */ /* * Device state switch handlers. */ static int rt2800pci_enable_radio(struct rt2x00_dev *rt2x00dev) { int retval; /* Wait for DMA, ignore error until we initialize queues. */ rt2800_wait_wpdma_ready(rt2x00dev); if (unlikely(rt2800mmio_init_queues(rt2x00dev))) return -EIO; retval = rt2800_enable_radio(rt2x00dev); if (retval) return retval; /* After resume MCU_BOOT_SIGNAL will trash these. */ rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, ~0); rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, ~0); rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_RADIO_OFF, 0xff, 0x02); rt2800pci_mcu_status(rt2x00dev, TOKEN_RADIO_OFF); rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0); rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP); return retval; } static void rt2800pci_disable_radio(struct rt2x00_dev *rt2x00dev) { if (rt2x00_is_soc(rt2x00dev)) { rt2800_disable_radio(rt2x00dev); rt2x00mmio_register_write(rt2x00dev, PWR_PIN_CFG, 0); rt2x00mmio_register_write(rt2x00dev, TX_PIN_CFG, 0); } } #ifdef CONFIG_PCI static int rt2800pci_set_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { if (state == STATE_AWAKE) { rt2800_mcu_request(rt2x00dev, MCU_WAKEUP, TOKEN_WAKEUP, 0, 0x02); rt2800pci_mcu_status(rt2x00dev, TOKEN_WAKEUP); } else if (state == STATE_SLEEP) { rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_STATUS, 0xffffffff); rt2x00mmio_register_write(rt2x00dev, H2M_MAILBOX_CID, 0xffffffff); rt2800_mcu_request(rt2x00dev, MCU_SLEEP, TOKEN_SLEEP, 0xff, 0x01); } return 0; } static int rt2800pci_set_device_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { int retval = 0; switch (state) { case STATE_RADIO_ON: retval = rt2800pci_enable_radio(rt2x00dev); break; case STATE_RADIO_OFF: /* * After the radio has been disabled, the device should * be put to sleep for powersaving. */ rt2800pci_disable_radio(rt2x00dev); rt2800pci_set_state(rt2x00dev, STATE_SLEEP); break; case STATE_RADIO_IRQ_ON: case STATE_RADIO_IRQ_OFF: rt2800mmio_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: case STATE_STANDBY: case STATE_AWAKE: retval = rt2800pci_set_state(rt2x00dev, state); break; default: retval = -ENOTSUPP; break; } if (unlikely(retval)) rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", state, retval); return retval; } /* * Device probe functions. */ static int rt2800pci_read_eeprom(struct rt2x00_dev *rt2x00dev) { int retval; if (rt2800pci_efuse_detect(rt2x00dev)) retval = rt2800pci_read_eeprom_efuse(rt2x00dev); else retval = rt2800pci_read_eeprom_pci(rt2x00dev); return retval; } static const struct ieee80211_ops rt2800pci_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, .stop = rt2x00mac_stop, .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .sw_scan_start = rt2x00mac_sw_scan_start, .sw_scan_complete = rt2x00mac_sw_scan_complete, .get_stats = rt2x00mac_get_stats, .get_tkip_seq = rt2800_get_tkip_seq, .set_rts_threshold = rt2800_set_rts_threshold, .sta_add = rt2x00mac_sta_add, .sta_remove = rt2x00mac_sta_remove, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2800_conf_tx, .get_tsf = rt2800_get_tsf, .rfkill_poll = rt2x00mac_rfkill_poll, .ampdu_action = rt2800_ampdu_action, .flush = rt2x00mac_flush, .get_survey = rt2800_get_survey, .get_ringparam = rt2x00mac_get_ringparam, .tx_frames_pending = rt2x00mac_tx_frames_pending, }; static const struct rt2800_ops rt2800pci_rt2800_ops = { .register_read = rt2x00mmio_register_read, .register_read_lock = rt2x00mmio_register_read, /* same for PCI */ .register_write = rt2x00mmio_register_write, .register_write_lock = rt2x00mmio_register_write, /* same for PCI */ .register_multiread = rt2x00mmio_register_multiread, .register_multiwrite = rt2x00mmio_register_multiwrite, .regbusy_read = rt2x00mmio_regbusy_read, .read_eeprom = rt2800pci_read_eeprom, .hwcrypt_disabled = rt2800pci_hwcrypt_disabled, .drv_write_firmware = rt2800pci_write_firmware, .drv_init_registers = rt2800mmio_init_registers, .drv_get_txwi = rt2800mmio_get_txwi, }; static const struct rt2x00lib_ops rt2800pci_rt2x00_ops = { .irq_handler = rt2800mmio_interrupt, .txstatus_tasklet = rt2800mmio_txstatus_tasklet, .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, .tbtt_tasklet = rt2800mmio_tbtt_tasklet, .rxdone_tasklet = rt2800mmio_rxdone_tasklet, .autowake_tasklet = rt2800mmio_autowake_tasklet, .probe_hw = rt2800_probe_hw, .get_firmware_name = rt2800pci_get_firmware_name, .check_firmware = rt2800_check_firmware, .load_firmware = rt2800_load_firmware, .initialize = rt2x00mmio_initialize, .uninitialize = rt2x00mmio_uninitialize, .get_entry_state = rt2800mmio_get_entry_state, .clear_entry = rt2800mmio_clear_entry, .set_device_state = rt2800pci_set_device_state, .rfkill_poll = rt2800_rfkill_poll, .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, .gain_calibration = rt2800_gain_calibration, .vco_calibration = rt2800_vco_calibration, .start_queue = rt2800mmio_start_queue, .kick_queue = rt2800mmio_kick_queue, .stop_queue = rt2800mmio_stop_queue, .flush_queue = rt2x00mmio_flush_queue, .write_tx_desc = rt2800mmio_write_tx_desc, .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .clear_beacon = rt2800_clear_beacon, .fill_rxdone = rt2800mmio_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, .config_filter = rt2800_config_filter, .config_intf = rt2800_config_intf, .config_erp = rt2800_config_erp, .config_ant = rt2800_config_ant, .config = rt2800_config, .sta_add = rt2800_sta_add, .sta_remove = rt2800_sta_remove, }; static const struct rt2x00_ops rt2800pci_ops = { .name = KBUILD_MODNAME, .drv_data_size = sizeof(struct rt2800_drv_data), .max_ap_intf = 8, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, .tx_queues = NUM_TX_QUEUES, .queue_init = rt2800mmio_queue_init, .lib = &rt2800pci_rt2x00_ops, .drv = &rt2800pci_rt2800_ops, .hw = &rt2800pci_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; /* * RT2800pci module information. */ static DEFINE_PCI_DEVICE_TABLE(rt2800pci_device_table) = { { PCI_DEVICE(0x1814, 0x0601) }, { PCI_DEVICE(0x1814, 0x0681) }, { PCI_DEVICE(0x1814, 0x0701) }, { PCI_DEVICE(0x1814, 0x0781) }, { PCI_DEVICE(0x1814, 0x3090) }, { PCI_DEVICE(0x1814, 0x3091) }, { PCI_DEVICE(0x1814, 0x3092) }, { PCI_DEVICE(0x1432, 0x7708) }, { PCI_DEVICE(0x1432, 0x7727) }, { PCI_DEVICE(0x1432, 0x7728) }, { PCI_DEVICE(0x1432, 0x7738) }, { PCI_DEVICE(0x1432, 0x7748) }, { PCI_DEVICE(0x1432, 0x7758) }, { PCI_DEVICE(0x1432, 0x7768) }, { PCI_DEVICE(0x1462, 0x891a) }, { PCI_DEVICE(0x1a3b, 0x1059) }, #ifdef CONFIG_RT2800PCI_RT3290 { PCI_DEVICE(0x1814, 0x3290) }, #endif #ifdef CONFIG_RT2800PCI_RT33XX { PCI_DEVICE(0x1814, 0x3390) }, #endif #ifdef CONFIG_RT2800PCI_RT35XX { PCI_DEVICE(0x1432, 0x7711) }, { PCI_DEVICE(0x1432, 0x7722) }, { PCI_DEVICE(0x1814, 0x3060) }, { PCI_DEVICE(0x1814, 0x3062) }, { PCI_DEVICE(0x1814, 0x3562) }, { PCI_DEVICE(0x1814, 0x3592) }, { PCI_DEVICE(0x1814, 0x3593) }, { PCI_DEVICE(0x1814, 0x359f) }, #endif #ifdef CONFIG_RT2800PCI_RT53XX { PCI_DEVICE(0x1814, 0x5360) }, { PCI_DEVICE(0x1814, 0x5362) }, { PCI_DEVICE(0x1814, 0x5390) }, { PCI_DEVICE(0x1814, 0x5392) }, { PCI_DEVICE(0x1814, 0x539a) }, { PCI_DEVICE(0x1814, 0x539b) }, { PCI_DEVICE(0x1814, 0x539f) }, #endif { 0, } }; #endif /* CONFIG_PCI */ MODULE_AUTHOR(DRV_PROJECT); MODULE_VERSION(DRV_VERSION); MODULE_DESCRIPTION("Ralink RT2800 PCI & PCMCIA Wireless LAN driver."); MODULE_SUPPORTED_DEVICE("Ralink RT2860 PCI & PCMCIA chipset based cards"); #ifdef CONFIG_PCI MODULE_FIRMWARE(FIRMWARE_RT2860); MODULE_DEVICE_TABLE(pci, rt2800pci_device_table); #endif /* CONFIG_PCI */ MODULE_LICENSE("GPL"); #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) static int rt2800soc_set_device_state(struct rt2x00_dev *rt2x00dev, enum dev_state state) { int retval = 0; switch (state) { case STATE_RADIO_ON: retval = rt2800pci_enable_radio(rt2x00dev); break; case STATE_RADIO_OFF: rt2800pci_disable_radio(rt2x00dev); break; case STATE_RADIO_IRQ_ON: case STATE_RADIO_IRQ_OFF: rt2800mmio_toggle_irq(rt2x00dev, state); break; case STATE_DEEP_SLEEP: case STATE_SLEEP: case STATE_STANDBY: case STATE_AWAKE: /* These states are not supported, but don't report an error */ retval = 0; break; default: retval = -ENOTSUPP; break; } if (unlikely(retval)) rt2x00_err(rt2x00dev, "Device failed to enter state %d (%d)\n", state, retval); return retval; } static int rt2800soc_read_eeprom(struct rt2x00_dev *rt2x00dev) { void __iomem *base_addr = ioremap(0x1F040000, EEPROM_SIZE); if (!base_addr) return -ENOMEM; memcpy_fromio(rt2x00dev->eeprom, base_addr, EEPROM_SIZE); iounmap(base_addr); return 0; } /* Firmware functions */ static char *rt2800soc_get_firmware_name(struct rt2x00_dev *rt2x00dev) { WARN_ON_ONCE(1); return NULL; } static int rt2800soc_load_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { WARN_ON_ONCE(1); return 0; } static int rt2800soc_check_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { WARN_ON_ONCE(1); return 0; } static int rt2800soc_write_firmware(struct rt2x00_dev *rt2x00dev, const u8 *data, const size_t len) { WARN_ON_ONCE(1); return 0; } static const struct ieee80211_ops rt2800soc_mac80211_ops = { .tx = rt2x00mac_tx, .start = rt2x00mac_start, .stop = rt2x00mac_stop, .add_interface = rt2x00mac_add_interface, .remove_interface = rt2x00mac_remove_interface, .config = rt2x00mac_config, .configure_filter = rt2x00mac_configure_filter, .set_key = rt2x00mac_set_key, .sw_scan_start = rt2x00mac_sw_scan_start, .sw_scan_complete = rt2x00mac_sw_scan_complete, .get_stats = rt2x00mac_get_stats, .get_tkip_seq = rt2800_get_tkip_seq, .set_rts_threshold = rt2800_set_rts_threshold, .sta_add = rt2x00mac_sta_add, .sta_remove = rt2x00mac_sta_remove, .bss_info_changed = rt2x00mac_bss_info_changed, .conf_tx = rt2800_conf_tx, .get_tsf = rt2800_get_tsf, .rfkill_poll = rt2x00mac_rfkill_poll, .ampdu_action = rt2800_ampdu_action, .flush = rt2x00mac_flush, .get_survey = rt2800_get_survey, .get_ringparam = rt2x00mac_get_ringparam, .tx_frames_pending = rt2x00mac_tx_frames_pending, }; static const struct rt2800_ops rt2800soc_rt2800_ops = { .register_read = rt2x00mmio_register_read, .register_read_lock = rt2x00mmio_register_read, /* same for SoCs */ .register_write = rt2x00mmio_register_write, .register_write_lock = rt2x00mmio_register_write, /* same for SoCs */ .register_multiread = rt2x00mmio_register_multiread, .register_multiwrite = rt2x00mmio_register_multiwrite, .regbusy_read = rt2x00mmio_regbusy_read, .read_eeprom = rt2800soc_read_eeprom, .hwcrypt_disabled = rt2800pci_hwcrypt_disabled, .drv_write_firmware = rt2800soc_write_firmware, .drv_init_registers = rt2800mmio_init_registers, .drv_get_txwi = rt2800mmio_get_txwi, }; static const struct rt2x00lib_ops rt2800soc_rt2x00_ops = { .irq_handler = rt2800mmio_interrupt, .txstatus_tasklet = rt2800mmio_txstatus_tasklet, .pretbtt_tasklet = rt2800mmio_pretbtt_tasklet, .tbtt_tasklet = rt2800mmio_tbtt_tasklet, .rxdone_tasklet = rt2800mmio_rxdone_tasklet, .autowake_tasklet = rt2800mmio_autowake_tasklet, .probe_hw = rt2800_probe_hw, .get_firmware_name = rt2800soc_get_firmware_name, .check_firmware = rt2800soc_check_firmware, .load_firmware = rt2800soc_load_firmware, .initialize = rt2x00mmio_initialize, .uninitialize = rt2x00mmio_uninitialize, .get_entry_state = rt2800mmio_get_entry_state, .clear_entry = rt2800mmio_clear_entry, .set_device_state = rt2800soc_set_device_state, .rfkill_poll = rt2800_rfkill_poll, .link_stats = rt2800_link_stats, .reset_tuner = rt2800_reset_tuner, .link_tuner = rt2800_link_tuner, .gain_calibration = rt2800_gain_calibration, .vco_calibration = rt2800_vco_calibration, .start_queue = rt2800mmio_start_queue, .kick_queue = rt2800mmio_kick_queue, .stop_queue = rt2800mmio_stop_queue, .flush_queue = rt2x00mmio_flush_queue, .write_tx_desc = rt2800mmio_write_tx_desc, .write_tx_data = rt2800_write_tx_data, .write_beacon = rt2800_write_beacon, .clear_beacon = rt2800_clear_beacon, .fill_rxdone = rt2800mmio_fill_rxdone, .config_shared_key = rt2800_config_shared_key, .config_pairwise_key = rt2800_config_pairwise_key, .config_filter = rt2800_config_filter, .config_intf = rt2800_config_intf, .config_erp = rt2800_config_erp, .config_ant = rt2800_config_ant, .config = rt2800_config, .sta_add = rt2800_sta_add, .sta_remove = rt2800_sta_remove, }; static const struct rt2x00_ops rt2800soc_ops = { .name = KBUILD_MODNAME, .drv_data_size = sizeof(struct rt2800_drv_data), .max_ap_intf = 8, .eeprom_size = EEPROM_SIZE, .rf_size = RF_SIZE, .tx_queues = NUM_TX_QUEUES, .queue_init = rt2800mmio_queue_init, .lib = &rt2800soc_rt2x00_ops, .drv = &rt2800soc_rt2800_ops, .hw = &rt2800soc_mac80211_ops, #ifdef CONFIG_RT2X00_LIB_DEBUGFS .debugfs = &rt2800_rt2x00debug, #endif /* CONFIG_RT2X00_LIB_DEBUGFS */ }; static int rt2800soc_probe(struct platform_device *pdev) { return rt2x00soc_probe(pdev, &rt2800soc_ops); } static struct platform_driver rt2800soc_driver = { .driver = { .name = "rt2800_wmac", .owner = THIS_MODULE, .mod_name = KBUILD_MODNAME, }, .probe = rt2800soc_probe, .remove = rt2x00soc_remove, .suspend = rt2x00soc_suspend, .resume = rt2x00soc_resume, }; #endif /* CONFIG_SOC_RT288X || CONFIG_SOC_RT305X */ #ifdef CONFIG_PCI static int rt2800pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) { return rt2x00pci_probe(pci_dev, &rt2800pci_ops); } static struct pci_driver rt2800pci_driver = { .name = KBUILD_MODNAME, .id_table = rt2800pci_device_table, .probe = rt2800pci_probe, .remove = rt2x00pci_remove, .suspend = rt2x00pci_suspend, .resume = rt2x00pci_resume, }; #endif /* CONFIG_PCI */ static int __init rt2800pci_init(void) { int ret = 0; #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) ret = platform_driver_register(&rt2800soc_driver); if (ret) return ret; #endif #ifdef CONFIG_PCI ret = pci_register_driver(&rt2800pci_driver); if (ret) { #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif return ret; } #endif return ret; } static void __exit rt2800pci_exit(void) { #ifdef CONFIG_PCI pci_unregister_driver(&rt2800pci_driver); #endif #if defined(CONFIG_SOC_RT288X) || defined(CONFIG_SOC_RT305X) platform_driver_unregister(&rt2800soc_driver); #endif } module_init(rt2800pci_init); module_exit(rt2800pci_exit);