menuconfig REGULATOR bool "Voltage and Current Regulator Support" help Generic Voltage and Current Regulator support. This framework is designed to provide a generic interface to voltage and current regulators within the Linux kernel. It's intended to provide voltage and current control to client or consumer drivers and also provide status information to user space applications through a sysfs interface. The intention is to allow systems to dynamically control regulator output in order to save power and prolong battery life. This applies to both voltage regulators (where voltage output is controllable) and current sinks (where current output is controllable). This framework safely compiles out if not selected so that client drivers can still be used in systems with no software controllable regulators. If unsure, say no. if REGULATOR config REGULATOR_DEBUG bool "Regulator debug support" help Say yes here to enable debugging support. config REGULATOR_DUMMY bool "Provide a dummy regulator if regulator lookups fail" help If this option is enabled then when a regulator lookup fails and the board has not specified that it has provided full constraints the regulator core will provide an always enabled dummy regulator, allowing consumer drivers to continue. A warning will be generated when this substitution is done. config REGULATOR_FIXED_VOLTAGE tristate "Fixed voltage regulator support" help This driver provides support for fixed voltage regulators, useful for systems which use a combination of software managed regulators and simple non-configurable regulators. config REGULATOR_VIRTUAL_CONSUMER tristate "Virtual regulator consumer support" help This driver provides a virtual consumer for the voltage and current regulator API which provides sysfs controls for configuring the supplies requested. This is mainly useful for test purposes. If unsure, say no. config REGULATOR_USERSPACE_CONSUMER tristate "Userspace regulator consumer support" help There are some classes of devices that are controlled entirely from user space. Userspace consumer driver provides ability to control power supplies for such devices. If unsure, say no. config REGULATOR_88PM8607 tristate "Marvell 88PM8607 Power regulators" depends on MFD_88PM860X=y help This driver supports 88PM8607 voltage regulator chips. config REGULATOR_AD5398 tristate "Analog Devices AD5398/AD5821 regulators" depends on I2C help This driver supports AD5398 and AD5821 current regulator chips. If building into module, its name is ad5398.ko. config REGULATOR_ANATOP tristate "Freescale i.MX on-chip ANATOP LDO regulators" depends on MFD_SYSCON help Say y here to support Freescale i.MX on-chip ANATOP LDOs regulators. It is recommended that this option be enabled on i.MX6 platform. config REGULATOR_AAT2870 tristate "AnalogicTech AAT2870 Regulators" depends on MFD_AAT2870_CORE help If you have a AnalogicTech AAT2870 say Y to enable the regulator driver. config REGULATOR_AB3100 tristate "ST-Ericsson AB3100 Regulator functions" depends on AB3100_CORE default y if AB3100_CORE help These regulators correspond to functionality in the AB3100 analog baseband dealing with power regulators for the system. config REGULATOR_AB8500 bool "ST-Ericsson AB8500 Power Regulators" depends on AB8500_CORE help This driver supports the regulators found on the ST-Ericsson mixed signal AB8500 PMIC config REGULATOR_ARIZONA tristate "Wolfson Arizona class devices" depends on MFD_ARIZONA depends on SND_SOC help Support for the regulators found on Wolfson Arizona class devices. config REGULATOR_AS3711 tristate "AS3711 PMIC" depends on MFD_AS3711 help This driver provides support for the voltage regulators on the AS3711 PMIC config REGULATOR_DA903X tristate "Dialog Semiconductor DA9030/DA9034 regulators" depends on PMIC_DA903X help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9030/DA9034 PMIC. config REGULATOR_DA9052 tristate "Dialog Semiconductor DA9052/DA9053 regulators" depends on PMIC_DA9052 help This driver supports the voltage regulators of DA9052-BC and DA9053-AA/Bx PMIC. config REGULATOR_DA9055 tristate "Dialog Semiconductor DA9055 regulators" depends on MFD_DA9055 help Say y here to support the BUCKs and LDOs regulators found on Dialog Semiconductor DA9055 PMIC. This driver can also be built as a module. If so, the module will be called da9055-regulator. config REGULATOR_DBX500_PRCMU bool config REGULATOR_DB8500_PRCMU bool "ST-Ericsson DB8500 Voltage Domain Regulators" depends on MFD_DB8500_PRCMU select REGULATOR_DBX500_PRCMU help This driver supports the voltage domain regulators controlled by the DB8500 PRCMU config REGULATOR_FAN53555 tristate "Fairchild FAN53555 Regulator" depends on I2C select REGMAP_I2C help This driver supports Fairchild FAN53555 Digitally Programmable TinyBuck Regulator. The FAN53555 is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface. config REGULATOR_GPIO tristate "GPIO regulator support" depends on GPIOLIB help This driver provides support for regulators that can be controlled via gpios. It is capable of supporting current and voltage regulators and the platform has to provide a mapping of GPIO-states to target volts/amps. config REGULATOR_ISL6271A tristate "Intersil ISL6271A Power regulator" depends on I2C help This driver supports ISL6271A voltage regulator chip. config REGULATOR_LP3971 tristate "National Semiconductors LP3971 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3971 PMIC config REGULATOR_LP3972 tristate "National Semiconductors LP3972 PMIC regulator driver" depends on I2C help Say Y here to support the voltage regulators and convertors on National Semiconductors LP3972 PMIC config REGULATOR_LP872X tristate "TI/National Semiconductor LP8720/LP8725 voltage regulators" depends on I2C=y select REGMAP_I2C help This driver supports LP8720/LP8725 PMIC config REGULATOR_LP8755 tristate "TI LP8755 High Performance PMU driver" depends on I2C select REGMAP_I2C help This driver supports LP8755 High Performance PMU driver. This chip contains six step-down DC/DC converters which can support 9 mode multiphase configuration. config REGULATOR_LP8788 tristate "TI LP8788 Power Regulators" depends on MFD_LP8788 help This driver supports LP8788 voltage regulator chip. config REGULATOR_MAX1586 tristate "Maxim 1586/1587 voltage regulator" depends on I2C help This driver controls a Maxim 1586 or 1587 voltage output regulator via I2C bus. The provided regulator is suitable for PXA27x chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX8649 tristate "Maxim 8649 voltage regulator" depends on I2C select REGMAP_I2C help This driver controls a Maxim 8649 voltage output regulator via I2C bus. config REGULATOR_MAX8660 tristate "Maxim 8660/8661 voltage regulator" depends on I2C help This driver controls a Maxim 8660/8661 voltage output regulator via I2C bus. config REGULATOR_MAX8907 tristate "Maxim 8907 voltage regulator" depends on MFD_MAX8907 help This driver controls a Maxim 8907 voltage output regulator via I2C bus. The provided regulator is suitable for Tegra chip to control Step-Down DC-DC and LDOs. config REGULATOR_MAX8925 tristate "Maxim MAX8925 Power Management IC" depends on MFD_MAX8925 help Say y here to support the voltage regulaltor of Maxim MAX8925 PMIC. config REGULATOR_MAX8952 tristate "Maxim MAX8952 Power Management IC" depends on I2C help This driver controls a Maxim 8952 voltage output regulator via I2C bus. Maxim 8952 has one voltage output and supports 4 DVS modes ranging from 0.77V to 1.40V by 0.01V steps. config REGULATOR_MAX8973 tristate "Maxim MAX8973 voltage regulator " depends on I2C select REGMAP_I2C help The MAXIM MAX8973 high-efficiency. three phase, DC-DC step-down switching regulator delievers up to 9A of output current. Each phase operates at a 2MHz fixed frequency with a 120 deg shift from the adjacent phase, allowing the use of small magnetic component. config REGULATOR_MAX8997 tristate "Maxim 8997/8966 regulator" depends on MFD_MAX8997 help This driver controls a Maxim 8997/8966 regulator via I2C bus. The provided regulator is suitable for S5PC110, S5PV210, and Exynos-4 chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX8998 tristate "Maxim 8998 voltage regulator" depends on MFD_MAX8998 help This driver controls a Maxim 8998 voltage output regulator via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. config REGULATOR_MAX77686 tristate "Maxim 77686 regulator" depends on MFD_MAX77686 help This driver controls a Maxim 77686 regulator via I2C bus. The provided regulator is suitable for Exynos-4 chips to control VARM and VINT voltages. config REGULATOR_MAX77693 tristate "Maxim MAX77693 regulator" depends on MFD_MAX77693 help This driver controls a Maxim 77693 regulator via I2C bus. The regulators include two LDOs, 'SAFEOUT1', 'SAFEOUT2' and one current regulator 'CHARGER'. This is suitable for Exynos-4x12 chips. config REGULATOR_MC13XXX_CORE tristate config REGULATOR_MC13783 tristate "Freescale MC13783 regulator driver" depends on MFD_MC13783 select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13783 PMIC. config REGULATOR_MC13892 tristate "Freescale MC13892 regulator driver" depends on MFD_MC13XXX select REGULATOR_MC13XXX_CORE help Say y here to support the regulators found on the Freescale MC13892 PMIC. config REGULATOR_PALMAS tristate "TI Palmas PMIC Regulators" depends on MFD_PALMAS help If you wish to control the regulators on the Palmas series of chips say Y here. This will enable support for all the software controllable SMPS/LDO regulators. The regulators available on Palmas series chips vary depending on the muxing. This is handled automatically in the driver by reading the mux info from OTP. config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP help This driver provides support for the voltage regulators of the PCAP2 PMIC. config REGULATOR_PCF50633 tristate "NXP PCF50633 regulator driver" depends on MFD_PCF50633 help Say Y here to support the voltage regulators and convertors on PCF50633 config REGULATOR_RC5T583 tristate "RICOH RC5T583 Power regulators" depends on MFD_RC5T583 help Select this option to enable the power regulator of RICOH PMIC RC5T583. This driver supports the control of different power rails of device through regulator interface. The device supports multiple DCDC/LDO outputs which can be controlled by i2c communication. config REGULATOR_S2MPS11 tristate "Samsung S2MPS11 voltage regulator" depends on MFD_SEC_CORE help This driver supports a Samsung S2MPS11 voltage output regulator via I2C bus. S2MPS11 is comprised of high efficient Buck converters including Dual-Phase Buck converter, Buck-Boost converter, various LDOs. config REGULATOR_S5M8767 tristate "Samsung S5M8767A voltage regulator" depends on MFD_SEC_CORE help This driver supports a Samsung S5M8767A voltage output regulator via I2C bus. S5M8767A have 9 Bucks and 28 LDOs output and supports DVS mode with 8bits of output voltage control. config REGULATOR_TI_ABB tristate "TI Adaptive Body Bias on-chip LDO" depends on ARCH_OMAP help Select this option to support Texas Instruments' on-chip Adaptive Body Bias (ABB) LDO regulators. It is recommended that this option be enabled on required TI SoC. Certain Operating Performance Points on TI SoCs may be unstable without enabling this as it provides device specific optimized bias to allow/optimize functionality. config REGULATOR_TPS51632 tristate "TI TPS51632 Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS51632 voltage regulator chip. The TPS51632 is 3-2-1 Phase D-Cap+ Step Down Driverless Controller with Serial VID control and DVFS. The voltage output can be configure through I2C interface or PWM interface. config REGULATOR_TPS6105X tristate "TI TPS6105X Power regulators" depends on TPS6105X default y if TPS6105X help This driver supports TPS61050/TPS61052 voltage regulator chips. It is a single boost converter primarily for white LEDs and audio amplifiers. config REGULATOR_TPS62360 tristate "TI TPS6236x Power Regulator" depends on I2C select REGMAP_I2C help This driver supports TPS6236x voltage regulator chip. This regulator is meant for processor core supply. This chip is high-frequency synchronous step down dc-dc converter optimized for battery-powered portable applications. config REGULATOR_TPS65023 tristate "TI TPS65023 Power regulators" depends on I2C select REGMAP_I2C help This driver supports TPS65023 voltage regulator chips. TPS65023 provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS6507X tristate "TI TPS6507X Power regulators" depends on I2C help This driver supports TPS6507X voltage regulator chips. TPS6507X provides three step-down converters and two general-purpose LDO voltage regulators. It supports TI's software based Class-2 SmartReflex implementation. config REGULATOR_TPS65090 tristate "TI TPS65090 Power regulator" depends on MFD_TPS65090 help This driver provides support for the voltage regulators on the TI TPS65090 PMIC. config REGULATOR_TPS65217 tristate "TI TPS65217 Power regulators" depends on MFD_TPS65217 help This driver supports TPS65217 voltage regulator chips. TPS65217 provides three step-down converters and four general-purpose LDO voltage regulators. It supports software based voltage control for different voltage domains config REGULATOR_TPS6524X tristate "TI TPS6524X Power regulators" depends on SPI help This driver supports TPS6524X voltage regulator chips. TPS6524X provides three step-down converters and two general-purpose LDO voltage regulators. This device is interfaced using a customized serial interface currently supported on the sequencer serial port controller. config REGULATOR_TPS6586X tristate "TI TPS6586X Power regulators" depends on MFD_TPS6586X help This driver supports TPS6586X voltage regulator chips. config REGULATOR_TPS65910 tristate "TI TPS65910/TPS65911 Power Regulators" depends on MFD_TPS65910 help This driver supports TPS65910/TPS65911 voltage regulator chips. config REGULATOR_TPS65912 tristate "TI TPS65912 Power regulator" depends on (MFD_TPS65912_I2C || MFD_TPS65912_SPI) help This driver supports TPS65912 voltage regulator chip. config REGULATOR_TPS80031 tristate "TI TPS80031/TPS80032 power regualtor driver" depends on MFD_TPS80031 help TPS80031/ TPS80032 Fully Integrated Power Management with Power Path and Battery Charger. It has 5 configurable step-down converters, 11 general purpose LDOs, VBUS generator and digital output to control regulators. config REGULATOR_TWL4030 tristate "TI TWL4030/TWL5030/TWL6030/TPS659x0 PMIC" depends on TWL4030_CORE help This driver supports the voltage regulators provided by this family of companion chips. config REGULATOR_VEXPRESS tristate "Versatile Express regulators" depends on VEXPRESS_CONFIG help This driver provides support for voltage regulators available on the ARM Ltd's Versatile Express platform. config REGULATOR_WM831X tristate "Wolfson Microelectronics WM831x PMIC regulators" depends on MFD_WM831X help Support the voltage and current regulators of the WM831x series of PMIC devices. config REGULATOR_WM8350 tristate "Wolfson Microelectronics WM8350 AudioPlus PMIC" depends on MFD_WM8350 help This driver provides support for the voltage and current regulators of the WM8350 AudioPlus PMIC. config REGULATOR_WM8400 tristate "Wolfson Microelectronics WM8400 AudioPlus PMIC" depends on MFD_WM8400 help This driver provides support for the voltage regulators of the WM8400 AudioPlus PMIC. config REGULATOR_WM8994 tristate "Wolfson Microelectronics WM8994 CODEC" depends on MFD_WM8994 help This driver provides support for the voltage regulators on the WM8994 CODEC. endif