/****************************************************************************** * * Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA * * The full GNU General Public License is included in this distribution in the * file called LICENSE. * * Contact Information: * Intel Linux Wireless * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * *****************************************************************************/ #include #include #include #include #include #include #include #include #include #include "rs.h" #include "fw-api.h" #include "sta.h" #include "iwl-op-mode.h" #include "mvm.h" #define RS_NAME "iwl-mvm-rs" #define NUM_TRY_BEFORE_ANT_TOGGLE 1 #define IWL_NUMBER_TRY 1 #define IWL_HT_NUMBER_TRY 3 #define IWL_RATE_MAX_WINDOW 62 /* # tx in history window */ #define IWL_RATE_MIN_FAILURE_TH 6 /* min failures to calc tpt */ #define IWL_RATE_MIN_SUCCESS_TH 8 /* min successes to calc tpt */ /* max allowed rate miss before sync LQ cmd */ #define IWL_MISSED_RATE_MAX 15 /* max time to accum history 2 seconds */ #define IWL_RATE_SCALE_FLUSH_INTVL (3*HZ) static u8 rs_ht_to_legacy[] = { [IWL_RATE_1M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_2M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_5M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_11M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_6M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_9M_INDEX] = IWL_RATE_6M_INDEX, [IWL_RATE_12M_INDEX] = IWL_RATE_9M_INDEX, [IWL_RATE_18M_INDEX] = IWL_RATE_12M_INDEX, [IWL_RATE_24M_INDEX] = IWL_RATE_18M_INDEX, [IWL_RATE_36M_INDEX] = IWL_RATE_24M_INDEX, [IWL_RATE_48M_INDEX] = IWL_RATE_36M_INDEX, [IWL_RATE_54M_INDEX] = IWL_RATE_48M_INDEX, [IWL_RATE_60M_INDEX] = IWL_RATE_54M_INDEX, }; static const u8 ant_toggle_lookup[] = { [ANT_NONE] = ANT_NONE, [ANT_A] = ANT_B, [ANT_B] = ANT_C, [ANT_AB] = ANT_BC, [ANT_C] = ANT_A, [ANT_AC] = ANT_AB, [ANT_BC] = ANT_AC, [ANT_ABC] = ANT_ABC, }; #define IWL_DECLARE_RATE_INFO(r, s, rp, rn) \ [IWL_RATE_##r##M_INDEX] = { IWL_RATE_##r##M_PLCP, \ IWL_RATE_HT_SISO_MCS_##s##_PLCP, \ IWL_RATE_HT_MIMO2_MCS_##s##_PLCP, \ IWL_RATE_VHT_SISO_MCS_##s##_PLCP, \ IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP,\ IWL_RATE_##rp##M_INDEX, \ IWL_RATE_##rn##M_INDEX } #define IWL_DECLARE_MCS_RATE(s) \ [IWL_RATE_MCS_##s##_INDEX] = { IWL_RATE_INVM_PLCP, \ IWL_RATE_HT_SISO_MCS_##s##_PLCP, \ IWL_RATE_HT_MIMO2_MCS_##s##_PLCP, \ IWL_RATE_VHT_SISO_MCS_##s##_PLCP, \ IWL_RATE_VHT_MIMO2_MCS_##s##_PLCP, \ IWL_RATE_INVM_INDEX, \ IWL_RATE_INVM_INDEX } /* * Parameter order: * rate, ht rate, prev rate, next rate * * If there isn't a valid next or previous rate then INV is used which * maps to IWL_RATE_INVALID * */ static const struct iwl_rs_rate_info iwl_rates[IWL_RATE_COUNT] = { IWL_DECLARE_RATE_INFO(1, INV, INV, 2), /* 1mbps */ IWL_DECLARE_RATE_INFO(2, INV, 1, 5), /* 2mbps */ IWL_DECLARE_RATE_INFO(5, INV, 2, 11), /*5.5mbps */ IWL_DECLARE_RATE_INFO(11, INV, 9, 12), /* 11mbps */ IWL_DECLARE_RATE_INFO(6, 0, 5, 11), /* 6mbps ; MCS 0 */ IWL_DECLARE_RATE_INFO(9, INV, 6, 11), /* 9mbps */ IWL_DECLARE_RATE_INFO(12, 1, 11, 18), /* 12mbps ; MCS 1 */ IWL_DECLARE_RATE_INFO(18, 2, 12, 24), /* 18mbps ; MCS 2 */ IWL_DECLARE_RATE_INFO(24, 3, 18, 36), /* 24mbps ; MCS 3 */ IWL_DECLARE_RATE_INFO(36, 4, 24, 48), /* 36mbps ; MCS 4 */ IWL_DECLARE_RATE_INFO(48, 5, 36, 54), /* 48mbps ; MCS 5 */ IWL_DECLARE_RATE_INFO(54, 6, 48, INV), /* 54mbps ; MCS 6 */ IWL_DECLARE_MCS_RATE(7), /* MCS 7 */ IWL_DECLARE_MCS_RATE(8), /* MCS 8 */ IWL_DECLARE_MCS_RATE(9), /* MCS 9 */ }; static inline u8 rs_extract_rate(u32 rate_n_flags) { /* also works for HT because bits 7:6 are zero there */ return (u8)(rate_n_flags & RATE_LEGACY_RATE_MSK); } static int iwl_hwrate_to_plcp_idx(u32 rate_n_flags) { int idx = 0; if (rate_n_flags & RATE_MCS_HT_MSK) { idx = rate_n_flags & RATE_HT_MCS_RATE_CODE_MSK; idx += IWL_RATE_MCS_0_INDEX; /* skip 9M not supported in HT*/ if (idx >= IWL_RATE_9M_INDEX) idx += 1; if ((idx >= IWL_FIRST_HT_RATE) && (idx <= IWL_LAST_HT_RATE)) return idx; } else if (rate_n_flags & RATE_MCS_VHT_MSK) { idx = rate_n_flags & RATE_VHT_MCS_RATE_CODE_MSK; idx += IWL_RATE_MCS_0_INDEX; /* skip 9M not supported in VHT*/ if (idx >= IWL_RATE_9M_INDEX) idx++; if ((idx >= IWL_FIRST_VHT_RATE) && (idx <= IWL_LAST_VHT_RATE)) return idx; } else { /* legacy rate format, search for match in table */ u8 legacy_rate = rs_extract_rate(rate_n_flags); for (idx = 0; idx < ARRAY_SIZE(iwl_rates); idx++) if (iwl_rates[idx].plcp == legacy_rate) return idx; } return -1; } static void rs_rate_scale_perform(struct iwl_mvm *mvm, struct sk_buff *skb, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta); static void rs_fill_link_cmd(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, u32 rate_n_flags); static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search); #ifdef CONFIG_MAC80211_DEBUGFS static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, u32 *rate_n_flags); #else static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, u32 *rate_n_flags) {} #endif /** * The following tables contain the expected throughput metrics for all rates * * 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 60 MBits * * where invalid entries are zeros. * * CCK rates are only valid in legacy table and will only be used in G * (2.4 GHz) band. */ static s32 expected_tpt_legacy[IWL_RATE_COUNT] = { 7, 13, 35, 58, 40, 57, 72, 98, 121, 154, 177, 186, 0, 0, 0 }; /* Expected TpT tables. 4 indexes: * 0 - NGI, 1 - SGI, 2 - AGG+NGI, 3 - AGG+SGI */ static s32 expected_tpt_siso_20MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 42, 0, 76, 102, 124, 159, 183, 193, 202, 216, 0}, {0, 0, 0, 0, 46, 0, 82, 110, 132, 168, 192, 202, 210, 225, 0}, {0, 0, 0, 0, 49, 0, 97, 145, 192, 285, 375, 420, 464, 551, 0}, {0, 0, 0, 0, 54, 0, 108, 160, 213, 315, 415, 465, 513, 608, 0}, }; static s32 expected_tpt_siso_40MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 77, 0, 127, 160, 184, 220, 242, 250, 257, 269, 275}, {0, 0, 0, 0, 83, 0, 135, 169, 193, 229, 250, 257, 264, 275, 280}, {0, 0, 0, 0, 101, 0, 199, 295, 389, 570, 744, 828, 911, 1070, 1173}, {0, 0, 0, 0, 112, 0, 220, 326, 429, 629, 819, 912, 1000, 1173, 1284}, }; static s32 expected_tpt_siso_80MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 130, 0, 191, 223, 244, 273, 288, 294, 298, 305, 308}, {0, 0, 0, 0, 138, 0, 200, 231, 251, 279, 293, 298, 302, 308, 312}, {0, 0, 0, 0, 217, 0, 429, 634, 834, 1220, 1585, 1760, 1931, 2258, 2466}, {0, 0, 0, 0, 241, 0, 475, 701, 921, 1343, 1741, 1931, 2117, 2468, 2691}, }; static s32 expected_tpt_mimo2_20MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 74, 0, 123, 155, 179, 213, 235, 243, 250, 261, 0}, {0, 0, 0, 0, 81, 0, 131, 164, 187, 221, 242, 250, 256, 267, 0}, {0, 0, 0, 0, 98, 0, 193, 286, 375, 550, 718, 799, 878, 1032, 0}, {0, 0, 0, 0, 109, 0, 214, 316, 414, 607, 790, 879, 965, 1132, 0}, }; static s32 expected_tpt_mimo2_40MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 123, 0, 182, 214, 235, 264, 279, 285, 289, 296, 300}, {0, 0, 0, 0, 131, 0, 191, 222, 242, 270, 284, 289, 293, 300, 303}, {0, 0, 0, 0, 200, 0, 390, 571, 741, 1067, 1365, 1505, 1640, 1894, 2053}, {0, 0, 0, 0, 221, 0, 430, 630, 816, 1169, 1490, 1641, 1784, 2053, 2221}, }; static s32 expected_tpt_mimo2_80MHz[4][IWL_RATE_COUNT] = { {0, 0, 0, 0, 182, 0, 240, 264, 278, 299, 308, 311, 313, 317, 319}, {0, 0, 0, 0, 190, 0, 247, 269, 282, 302, 310, 313, 315, 319, 320}, {0, 0, 0, 0, 428, 0, 833, 1215, 1577, 2254, 2863, 3147, 3418, 3913, 4219}, {0, 0, 0, 0, 474, 0, 920, 1338, 1732, 2464, 3116, 3418, 3705, 4225, 4545}, }; /* mbps, mcs */ static const struct iwl_rate_mcs_info iwl_rate_mcs[IWL_RATE_COUNT] = { { "1", "BPSK DSSS"}, { "2", "QPSK DSSS"}, {"5.5", "BPSK CCK"}, { "11", "QPSK CCK"}, { "6", "BPSK 1/2"}, { "9", "BPSK 1/2"}, { "12", "QPSK 1/2"}, { "18", "QPSK 3/4"}, { "24", "16QAM 1/2"}, { "36", "16QAM 3/4"}, { "48", "64QAM 2/3"}, { "54", "64QAM 3/4"}, { "60", "64QAM 5/6"}, }; #define MCS_INDEX_PER_STREAM (8) static void rs_rate_scale_clear_window(struct iwl_rate_scale_data *window) { window->data = 0; window->success_counter = 0; window->success_ratio = IWL_INVALID_VALUE; window->counter = 0; window->average_tpt = IWL_INVALID_VALUE; window->stamp = 0; } static inline u8 rs_is_valid_ant(u8 valid_antenna, u8 ant_type) { return (ant_type & valid_antenna) == ant_type; } #ifdef CONFIG_MAC80211_DEBUGFS /** * Program the device to use fixed rate for frame transmit * This is for debugging/testing only * once the device start use fixed rate, we need to reload the module * to being back the normal operation. */ static void rs_program_fix_rate(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta) { lq_sta->active_legacy_rate = 0x0FFF; /* 1 - 54 MBits, includes CCK */ lq_sta->active_siso_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ lq_sta->active_mimo2_rate = 0x1FD0; /* 6 - 60 MBits, no 9, no CCK */ IWL_DEBUG_RATE(mvm, "sta_id %d rate 0x%X\n", lq_sta->lq.sta_id, lq_sta->dbg_fixed_rate); if (lq_sta->dbg_fixed_rate) { rs_fill_link_cmd(NULL, NULL, lq_sta, lq_sta->dbg_fixed_rate); iwl_mvm_send_lq_cmd(lq_sta->drv, &lq_sta->lq, CMD_ASYNC, false); } } #endif static int rs_tl_turn_on_agg_for_tid(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_data, u8 tid, struct ieee80211_sta *sta) { int ret = -EAGAIN; IWL_DEBUG_HT(mvm, "Starting Tx agg: STA: %pM tid: %d\n", sta->addr, tid); ret = ieee80211_start_tx_ba_session(sta, tid, 5000); if (ret == -EAGAIN) { /* * driver and mac80211 is out of sync * this might be cause by reloading firmware * stop the tx ba session here */ IWL_ERR(mvm, "Fail start Tx agg on tid: %d\n", tid); ieee80211_stop_tx_ba_session(sta, tid); } return ret; } static void rs_tl_turn_on_agg(struct iwl_mvm *mvm, u8 tid, struct iwl_lq_sta *lq_data, struct ieee80211_sta *sta) { if (tid < IWL_MAX_TID_COUNT) rs_tl_turn_on_agg_for_tid(mvm, lq_data, tid, sta); else IWL_ERR(mvm, "tid exceeds max TID count: %d/%d\n", tid, IWL_MAX_TID_COUNT); } static inline int get_num_of_ant_from_rate(u32 rate_n_flags) { return !!(rate_n_flags & RATE_MCS_ANT_A_MSK) + !!(rate_n_flags & RATE_MCS_ANT_B_MSK) + !!(rate_n_flags & RATE_MCS_ANT_C_MSK); } /* * Static function to get the expected throughput from an iwl_scale_tbl_info * that wraps a NULL pointer check */ static s32 get_expected_tpt(struct iwl_scale_tbl_info *tbl, int rs_index) { if (tbl->expected_tpt) return tbl->expected_tpt[rs_index]; return 0; } /** * rs_collect_tx_data - Update the success/failure sliding window * * We keep a sliding window of the last 62 packets transmitted * at this rate. window->data contains the bitmask of successful * packets. */ static int rs_collect_tx_data(struct iwl_scale_tbl_info *tbl, int scale_index, int attempts, int successes) { struct iwl_rate_scale_data *window = NULL; static const u64 mask = (((u64)1) << (IWL_RATE_MAX_WINDOW - 1)); s32 fail_count, tpt; if (scale_index < 0 || scale_index >= IWL_RATE_COUNT) return -EINVAL; /* Select window for current tx bit rate */ window = &(tbl->win[scale_index]); /* Get expected throughput */ tpt = get_expected_tpt(tbl, scale_index); /* * Keep track of only the latest 62 tx frame attempts in this rate's * history window; anything older isn't really relevant any more. * If we have filled up the sliding window, drop the oldest attempt; * if the oldest attempt (highest bit in bitmap) shows "success", * subtract "1" from the success counter (this is the main reason * we keep these bitmaps!). */ while (attempts > 0) { if (window->counter >= IWL_RATE_MAX_WINDOW) { /* remove earliest */ window->counter = IWL_RATE_MAX_WINDOW - 1; if (window->data & mask) { window->data &= ~mask; window->success_counter--; } } /* Increment frames-attempted counter */ window->counter++; /* Shift bitmap by one frame to throw away oldest history */ window->data <<= 1; /* Mark the most recent #successes attempts as successful */ if (successes > 0) { window->success_counter++; window->data |= 0x1; successes--; } attempts--; } /* Calculate current success ratio, avoid divide-by-0! */ if (window->counter > 0) window->success_ratio = 128 * (100 * window->success_counter) / window->counter; else window->success_ratio = IWL_INVALID_VALUE; fail_count = window->counter - window->success_counter; /* Calculate average throughput, if we have enough history. */ if ((fail_count >= IWL_RATE_MIN_FAILURE_TH) || (window->success_counter >= IWL_RATE_MIN_SUCCESS_TH)) window->average_tpt = (window->success_ratio * tpt + 64) / 128; else window->average_tpt = IWL_INVALID_VALUE; /* Tag this window as having been updated */ window->stamp = jiffies; return 0; } /* * Fill uCode API rate_n_flags field, based on "search" or "active" table. */ /* FIXME:RS:remove this function and put the flags statically in the table */ static u32 rate_n_flags_from_tbl(struct iwl_mvm *mvm, struct iwl_scale_tbl_info *tbl, int index) { u32 rate_n_flags = 0; rate_n_flags |= ((tbl->ant_type << RATE_MCS_ANT_POS) & RATE_MCS_ANT_ABC_MSK); if (is_legacy(tbl->lq_type)) { rate_n_flags |= iwl_rates[index].plcp; if (index >= IWL_FIRST_CCK_RATE && index <= IWL_LAST_CCK_RATE) rate_n_flags |= RATE_MCS_CCK_MSK; return rate_n_flags; } if (is_ht(tbl->lq_type)) { if (index < IWL_FIRST_HT_RATE || index > IWL_LAST_HT_RATE) { IWL_ERR(mvm, "Invalid HT rate index %d\n", index); index = IWL_LAST_HT_RATE; } rate_n_flags |= RATE_MCS_HT_MSK; if (is_ht_siso(tbl->lq_type)) rate_n_flags |= iwl_rates[index].plcp_ht_siso; else if (is_ht_mimo2(tbl->lq_type)) rate_n_flags |= iwl_rates[index].plcp_ht_mimo2; else WARN_ON_ONCE(1); } else if (is_vht(tbl->lq_type)) { if (index < IWL_FIRST_VHT_RATE || index > IWL_LAST_VHT_RATE) { IWL_ERR(mvm, "Invalid VHT rate index %d\n", index); index = IWL_LAST_VHT_RATE; } rate_n_flags |= RATE_MCS_VHT_MSK; if (is_vht_siso(tbl->lq_type)) rate_n_flags |= iwl_rates[index].plcp_vht_siso; else if (is_vht_mimo2(tbl->lq_type)) rate_n_flags |= iwl_rates[index].plcp_vht_mimo2; else WARN_ON_ONCE(1); } else { IWL_ERR(mvm, "Invalid tbl->lq_type %d\n", tbl->lq_type); } rate_n_flags |= tbl->bw; if (tbl->is_SGI) rate_n_flags |= RATE_MCS_SGI_MSK; return rate_n_flags; } /* * Interpret uCode API's rate_n_flags format, * fill "search" or "active" tx mode table. */ static int rs_get_tbl_info_from_mcs(const u32 rate_n_flags, enum ieee80211_band band, struct iwl_scale_tbl_info *tbl, int *rate_idx) { u32 ant_msk = (rate_n_flags & RATE_MCS_ANT_ABC_MSK); u8 num_of_ant = get_num_of_ant_from_rate(rate_n_flags); u8 nss; memset(tbl, 0, offsetof(struct iwl_scale_tbl_info, win)); *rate_idx = iwl_hwrate_to_plcp_idx(rate_n_flags); if (*rate_idx == IWL_RATE_INVALID) { *rate_idx = -1; return -EINVAL; } tbl->is_SGI = 0; /* default legacy setup */ tbl->bw = 0; tbl->ant_type = (ant_msk >> RATE_MCS_ANT_POS); tbl->lq_type = LQ_NONE; tbl->max_search = IWL_MAX_SEARCH; /* Legacy */ if (!(rate_n_flags & RATE_MCS_HT_MSK) && !(rate_n_flags & RATE_MCS_VHT_MSK)) { if (num_of_ant == 1) { if (band == IEEE80211_BAND_5GHZ) tbl->lq_type = LQ_LEGACY_A; else tbl->lq_type = LQ_LEGACY_G; } return 0; } /* HT or VHT */ if (rate_n_flags & RATE_MCS_SGI_MSK) tbl->is_SGI = 1; tbl->bw = rate_n_flags & RATE_MCS_CHAN_WIDTH_MSK; if (rate_n_flags & RATE_MCS_HT_MSK) { nss = ((rate_n_flags & RATE_HT_MCS_NSS_MSK) >> RATE_HT_MCS_NSS_POS) + 1; if (nss == 1) { tbl->lq_type = LQ_HT_SISO; WARN_ON_ONCE(num_of_ant != 1); } else if (nss == 2) { tbl->lq_type = LQ_HT_MIMO2; WARN_ON_ONCE(num_of_ant != 2); } else { WARN_ON_ONCE(1); } } else if (rate_n_flags & RATE_MCS_VHT_MSK) { nss = ((rate_n_flags & RATE_VHT_MCS_NSS_MSK) >> RATE_VHT_MCS_NSS_POS) + 1; if (nss == 1) { tbl->lq_type = LQ_VHT_SISO; WARN_ON_ONCE(num_of_ant != 1); } else if (nss == 2) { tbl->lq_type = LQ_VHT_MIMO2; WARN_ON_ONCE(num_of_ant != 2); } else { WARN_ON_ONCE(1); } } WARN_ON_ONCE(tbl->bw == RATE_MCS_CHAN_WIDTH_160); WARN_ON_ONCE(tbl->bw == RATE_MCS_CHAN_WIDTH_80 && !is_vht(tbl->lq_type)); return 0; } /* switch to another antenna/antennas and return 1 */ /* if no other valid antenna found, return 0 */ static int rs_toggle_antenna(u32 valid_ant, u32 *rate_n_flags, struct iwl_scale_tbl_info *tbl) { u8 new_ant_type; if (!tbl->ant_type || tbl->ant_type > ANT_ABC) return 0; if (!rs_is_valid_ant(valid_ant, tbl->ant_type)) return 0; new_ant_type = ant_toggle_lookup[tbl->ant_type]; while ((new_ant_type != tbl->ant_type) && !rs_is_valid_ant(valid_ant, new_ant_type)) new_ant_type = ant_toggle_lookup[new_ant_type]; if (new_ant_type == tbl->ant_type) return 0; tbl->ant_type = new_ant_type; *rate_n_flags &= ~RATE_MCS_ANT_ABC_MSK; *rate_n_flags |= new_ant_type << RATE_MCS_ANT_POS; return 1; } /** * rs_get_supported_rates - get the available rates * * if management frame or broadcast frame only return * basic available rates. * */ static u16 rs_get_supported_rates(struct iwl_lq_sta *lq_sta, struct ieee80211_hdr *hdr, enum iwl_table_type rate_type) { if (is_legacy(rate_type)) return lq_sta->active_legacy_rate; else if (is_siso(rate_type)) return lq_sta->active_siso_rate; else if (is_mimo2(rate_type)) return lq_sta->active_mimo2_rate; WARN_ON_ONCE(1); return 0; } static u16 rs_get_adjacent_rate(struct iwl_mvm *mvm, u8 index, u16 rate_mask, int rate_type) { u8 high = IWL_RATE_INVALID; u8 low = IWL_RATE_INVALID; /* 802.11A or ht walks to the next literal adjacent rate in * the rate table */ if (is_a_band(rate_type) || !is_legacy(rate_type)) { int i; u32 mask; /* Find the previous rate that is in the rate mask */ i = index - 1; for (mask = (1 << i); i >= 0; i--, mask >>= 1) { if (rate_mask & mask) { low = i; break; } } /* Find the next rate that is in the rate mask */ i = index + 1; for (mask = (1 << i); i < IWL_RATE_COUNT; i++, mask <<= 1) { if (rate_mask & mask) { high = i; break; } } return (high << 8) | low; } low = index; while (low != IWL_RATE_INVALID) { low = iwl_rates[low].prev_rs; if (low == IWL_RATE_INVALID) break; if (rate_mask & (1 << low)) break; IWL_DEBUG_RATE(mvm, "Skipping masked lower rate: %d\n", low); } high = index; while (high != IWL_RATE_INVALID) { high = iwl_rates[high].next_rs; if (high == IWL_RATE_INVALID) break; if (rate_mask & (1 << high)) break; IWL_DEBUG_RATE(mvm, "Skipping masked higher rate: %d\n", high); } return (high << 8) | low; } static u32 rs_get_lower_rate(struct iwl_lq_sta *lq_sta, struct iwl_scale_tbl_info *tbl, u8 scale_index, u8 ht_possible) { s32 low; u16 rate_mask; u16 high_low; u8 switch_to_legacy = 0; struct iwl_mvm *mvm = lq_sta->drv; /* check if we need to switch from HT to legacy rates. * assumption is that mandatory rates (1Mbps or 6Mbps) * are always supported (spec demand) */ if (!is_legacy(tbl->lq_type) && (!ht_possible || !scale_index)) { switch_to_legacy = 1; scale_index = rs_ht_to_legacy[scale_index]; if (lq_sta->band == IEEE80211_BAND_5GHZ) tbl->lq_type = LQ_LEGACY_A; else tbl->lq_type = LQ_LEGACY_G; if (num_of_ant(tbl->ant_type) > 1) tbl->ant_type = first_antenna(iwl_fw_valid_tx_ant(mvm->fw)); tbl->bw = 0; tbl->is_SGI = 0; tbl->max_search = IWL_MAX_SEARCH; } rate_mask = rs_get_supported_rates(lq_sta, NULL, tbl->lq_type); /* Mask with station rate restriction */ if (is_legacy(tbl->lq_type)) { /* supp_rates has no CCK bits in A mode */ if (lq_sta->band == IEEE80211_BAND_5GHZ) rate_mask = (u16)(rate_mask & (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); else rate_mask = (u16)(rate_mask & lq_sta->supp_rates); } /* If we switched from HT to legacy, check current rate */ if (switch_to_legacy && (rate_mask & (1 << scale_index))) { low = scale_index; goto out; } high_low = rs_get_adjacent_rate(lq_sta->drv, scale_index, rate_mask, tbl->lq_type); low = high_low & 0xff; if (low == IWL_RATE_INVALID) low = scale_index; out: return rate_n_flags_from_tbl(lq_sta->drv, tbl, low); } /* * Simple function to compare two rate scale table types */ static bool table_type_matches(struct iwl_scale_tbl_info *a, struct iwl_scale_tbl_info *b) { return (a->lq_type == b->lq_type) && (a->ant_type == b->ant_type) && (a->is_SGI == b->is_SGI); } static u32 rs_ch_width_from_mac_flags(enum mac80211_rate_control_flags flags) { if (flags & IEEE80211_TX_RC_40_MHZ_WIDTH) return RATE_MCS_CHAN_WIDTH_40; else if (flags & IEEE80211_TX_RC_80_MHZ_WIDTH) return RATE_MCS_CHAN_WIDTH_80; else if (flags & IEEE80211_TX_RC_160_MHZ_WIDTH) return RATE_MCS_CHAN_WIDTH_160; return RATE_MCS_CHAN_WIDTH_20; } /* * mac80211 sends us Tx status */ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta, struct sk_buff *skb) { int legacy_success; int retries; int rs_index, mac_index, i; struct iwl_lq_sta *lq_sta = priv_sta; struct iwl_lq_cmd *table; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct iwl_op_mode *op_mode = (struct iwl_op_mode *)mvm_r; struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode); struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); enum mac80211_rate_control_flags mac_flags; u32 tx_rate; struct iwl_scale_tbl_info tbl_type; struct iwl_scale_tbl_info *curr_tbl, *other_tbl, *tmp_tbl; IWL_DEBUG_RATE_LIMIT(mvm, "get frame ack response, update rate scale window\n"); /* Treat uninitialized rate scaling data same as non-existing. */ if (!lq_sta) { IWL_DEBUG_RATE(mvm, "Station rate scaling not created yet.\n"); return; } else if (!lq_sta->drv) { IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); return; } if (!ieee80211_is_data(hdr->frame_control) || info->flags & IEEE80211_TX_CTL_NO_ACK) return; /* This packet was aggregated but doesn't carry status info */ if ((info->flags & IEEE80211_TX_CTL_AMPDU) && !(info->flags & IEEE80211_TX_STAT_AMPDU)) return; /* * Ignore this Tx frame response if its initial rate doesn't match * that of latest Link Quality command. There may be stragglers * from a previous Link Quality command, but we're no longer interested * in those; they're either from the "active" mode while we're trying * to check "search" mode, or a prior "search" mode after we've moved * to a new "search" mode (which might become the new "active" mode). */ table = &lq_sta->lq; tx_rate = le32_to_cpu(table->rs_table[0]); rs_get_tbl_info_from_mcs(tx_rate, info->band, &tbl_type, &rs_index); if (info->band == IEEE80211_BAND_5GHZ) rs_index -= IWL_FIRST_OFDM_RATE; mac_flags = info->status.rates[0].flags; mac_index = info->status.rates[0].idx; /* For HT packets, map MCS to PLCP */ if (mac_flags & IEEE80211_TX_RC_MCS) { /* Remove # of streams */ mac_index &= RATE_HT_MCS_RATE_CODE_MSK; if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) mac_index++; /* * mac80211 HT index is always zero-indexed; we need to move * HT OFDM rates after CCK rates in 2.4 GHz band */ if (info->band == IEEE80211_BAND_2GHZ) mac_index += IWL_FIRST_OFDM_RATE; } else if (mac_flags & IEEE80211_TX_RC_VHT_MCS) { mac_index &= RATE_VHT_MCS_RATE_CODE_MSK; if (mac_index >= (IWL_RATE_9M_INDEX - IWL_FIRST_OFDM_RATE)) mac_index++; } /* Here we actually compare this rate to the latest LQ command */ if ((mac_index < 0) || (tbl_type.is_SGI != !!(mac_flags & IEEE80211_TX_RC_SHORT_GI)) || (tbl_type.bw != rs_ch_width_from_mac_flags(mac_flags)) || (tbl_type.ant_type != info->status.antenna) || (!!(tx_rate & RATE_MCS_HT_MSK) != !!(mac_flags & IEEE80211_TX_RC_MCS)) || (!!(tx_rate & RATE_MCS_VHT_MSK) != !!(mac_flags & IEEE80211_TX_RC_VHT_MCS)) || (!!(tx_rate & RATE_HT_MCS_GF_MSK) != !!(mac_flags & IEEE80211_TX_RC_GREEN_FIELD)) || (rs_index != mac_index)) { IWL_DEBUG_RATE(mvm, "initial rate %d does not match %d (0x%x)\n", mac_index, rs_index, tx_rate); /* * Since rates mis-match, the last LQ command may have failed. * After IWL_MISSED_RATE_MAX mis-matches, resync the uCode with * ... driver. */ lq_sta->missed_rate_counter++; if (lq_sta->missed_rate_counter > IWL_MISSED_RATE_MAX) { lq_sta->missed_rate_counter = 0; iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); } /* Regardless, ignore this status info for outdated rate */ return; } else /* Rate did match, so reset the missed_rate_counter */ lq_sta->missed_rate_counter = 0; /* Figure out if rate scale algorithm is in active or search table */ if (table_type_matches(&tbl_type, &(lq_sta->lq_info[lq_sta->active_tbl]))) { curr_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); other_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); } else if (table_type_matches( &tbl_type, &lq_sta->lq_info[1 - lq_sta->active_tbl])) { curr_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); other_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); } else { IWL_DEBUG_RATE(mvm, "Neither active nor search matches tx rate\n"); tmp_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); IWL_DEBUG_RATE(mvm, "active- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); tmp_tbl = &(lq_sta->lq_info[1 - lq_sta->active_tbl]); IWL_DEBUG_RATE(mvm, "search- lq:%x, ant:%x, SGI:%d\n", tmp_tbl->lq_type, tmp_tbl->ant_type, tmp_tbl->is_SGI); IWL_DEBUG_RATE(mvm, "actual- lq:%x, ant:%x, SGI:%d\n", tbl_type.lq_type, tbl_type.ant_type, tbl_type.is_SGI); /* * no matching table found, let's by-pass the data collection * and continue to perform rate scale to find the rate table */ rs_stay_in_table(lq_sta, true); goto done; } /* * Updating the frame history depends on whether packets were * aggregated. * * For aggregation, all packets were transmitted at the same rate, the * first index into rate scale table. */ if (info->flags & IEEE80211_TX_STAT_AMPDU) { tx_rate = le32_to_cpu(table->rs_table[0]); rs_get_tbl_info_from_mcs(tx_rate, info->band, &tbl_type, &rs_index); rs_collect_tx_data(curr_tbl, rs_index, info->status.ampdu_len, info->status.ampdu_ack_len); /* Update success/fail counts if not searching for new mode */ if (lq_sta->stay_in_tbl) { lq_sta->total_success += info->status.ampdu_ack_len; lq_sta->total_failed += (info->status.ampdu_len - info->status.ampdu_ack_len); } } else { /* * For legacy, update frame history with for each Tx retry. */ retries = info->status.rates[0].count - 1; /* HW doesn't send more than 15 retries */ retries = min(retries, 15); /* The last transmission may have been successful */ legacy_success = !!(info->flags & IEEE80211_TX_STAT_ACK); /* Collect data for each rate used during failed TX attempts */ for (i = 0; i <= retries; ++i) { tx_rate = le32_to_cpu(table->rs_table[i]); rs_get_tbl_info_from_mcs(tx_rate, info->band, &tbl_type, &rs_index); /* * Only collect stats if retried rate is in the same RS * table as active/search. */ if (table_type_matches(&tbl_type, curr_tbl)) tmp_tbl = curr_tbl; else if (table_type_matches(&tbl_type, other_tbl)) tmp_tbl = other_tbl; else continue; rs_collect_tx_data(tmp_tbl, rs_index, 1, i < retries ? 0 : legacy_success); } /* Update success/fail counts if not searching for new mode */ if (lq_sta->stay_in_tbl) { lq_sta->total_success += legacy_success; lq_sta->total_failed += retries + (1 - legacy_success); } } /* The last TX rate is cached in lq_sta; it's set in if/else above */ lq_sta->last_rate_n_flags = tx_rate; done: /* See if there's a better rate or modulation mode to try. */ if (sta && sta->supp_rates[sband->band]) rs_rate_scale_perform(mvm, skb, sta, lq_sta); } /* * Begin a period of staying with a selected modulation mode. * Set "stay_in_tbl" flag to prevent any mode switches. * Set frame tx success limits according to legacy vs. high-throughput, * and reset overall (spanning all rates) tx success history statistics. * These control how long we stay using same modulation mode before * searching for a new mode. */ static void rs_set_stay_in_table(struct iwl_mvm *mvm, u8 is_legacy, struct iwl_lq_sta *lq_sta) { IWL_DEBUG_RATE(mvm, "we are staying in the same table\n"); lq_sta->stay_in_tbl = 1; /* only place this gets set */ if (is_legacy) { lq_sta->table_count_limit = IWL_LEGACY_TABLE_COUNT; lq_sta->max_failure_limit = IWL_LEGACY_FAILURE_LIMIT; lq_sta->max_success_limit = IWL_LEGACY_SUCCESS_LIMIT; } else { lq_sta->table_count_limit = IWL_NONE_LEGACY_TABLE_COUNT; lq_sta->max_failure_limit = IWL_NONE_LEGACY_FAILURE_LIMIT; lq_sta->max_success_limit = IWL_NONE_LEGACY_SUCCESS_LIMIT; } lq_sta->table_count = 0; lq_sta->total_failed = 0; lq_sta->total_success = 0; lq_sta->flush_timer = jiffies; lq_sta->action_counter = 0; } /* * Find correct throughput table for given mode of modulation */ static void rs_set_expected_tpt_table(struct iwl_lq_sta *lq_sta, struct iwl_scale_tbl_info *tbl) { /* Used to choose among HT tables */ s32 (*ht_tbl_pointer)[IWL_RATE_COUNT]; /* Check for invalid LQ type */ if (WARN_ON_ONCE(!is_legacy(tbl->lq_type) && !is_ht(tbl->lq_type) && !(is_vht(tbl->lq_type)))) { tbl->expected_tpt = expected_tpt_legacy; return; } /* Legacy rates have only one table */ if (is_legacy(tbl->lq_type)) { tbl->expected_tpt = expected_tpt_legacy; return; } ht_tbl_pointer = expected_tpt_mimo2_20MHz; /* Choose among many HT tables depending on number of streams * (SISO/MIMO2), channel width (20/40/80), SGI, and aggregation * status */ if (is_siso(tbl->lq_type)) { switch (tbl->bw) { case RATE_MCS_CHAN_WIDTH_20: ht_tbl_pointer = expected_tpt_siso_20MHz; break; case RATE_MCS_CHAN_WIDTH_40: ht_tbl_pointer = expected_tpt_siso_40MHz; break; case RATE_MCS_CHAN_WIDTH_80: ht_tbl_pointer = expected_tpt_siso_80MHz; break; default: WARN_ON_ONCE(1); } } else if (is_mimo2(tbl->lq_type)) { switch (tbl->bw) { case RATE_MCS_CHAN_WIDTH_20: ht_tbl_pointer = expected_tpt_mimo2_20MHz; break; case RATE_MCS_CHAN_WIDTH_40: ht_tbl_pointer = expected_tpt_mimo2_40MHz; break; case RATE_MCS_CHAN_WIDTH_80: ht_tbl_pointer = expected_tpt_mimo2_80MHz; break; default: WARN_ON_ONCE(1); } } else { WARN_ON_ONCE(1); } if (!tbl->is_SGI && !lq_sta->is_agg) /* Normal */ tbl->expected_tpt = ht_tbl_pointer[0]; else if (tbl->is_SGI && !lq_sta->is_agg) /* SGI */ tbl->expected_tpt = ht_tbl_pointer[1]; else if (!tbl->is_SGI && lq_sta->is_agg) /* AGG */ tbl->expected_tpt = ht_tbl_pointer[2]; else /* AGG+SGI */ tbl->expected_tpt = ht_tbl_pointer[3]; } /* * Find starting rate for new "search" high-throughput mode of modulation. * Goal is to find lowest expected rate (under perfect conditions) that is * above the current measured throughput of "active" mode, to give new mode * a fair chance to prove itself without too many challenges. * * This gets called when transitioning to more aggressive modulation * (i.e. legacy to SISO or MIMO, or SISO to MIMO), as well as less aggressive * (i.e. MIMO to SISO). When moving to MIMO, bit rate will typically need * to decrease to match "active" throughput. When moving from MIMO to SISO, * bit rate will typically need to increase, but not if performance was bad. */ static s32 rs_get_best_rate(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct iwl_scale_tbl_info *tbl, /* "search" */ u16 rate_mask, s8 index) { /* "active" values */ struct iwl_scale_tbl_info *active_tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); s32 active_sr = active_tbl->win[index].success_ratio; s32 active_tpt = active_tbl->expected_tpt[index]; /* expected "search" throughput */ s32 *tpt_tbl = tbl->expected_tpt; s32 new_rate, high, low, start_hi; u16 high_low; s8 rate = index; new_rate = high = low = start_hi = IWL_RATE_INVALID; while (1) { high_low = rs_get_adjacent_rate(mvm, rate, rate_mask, tbl->lq_type); low = high_low & 0xff; high = (high_low >> 8) & 0xff; /* * Lower the "search" bit rate, to give new "search" mode * approximately the same throughput as "active" if: * * 1) "Active" mode has been working modestly well (but not * great), and expected "search" throughput (under perfect * conditions) at candidate rate is above the actual * measured "active" throughput (but less than expected * "active" throughput under perfect conditions). * OR * 2) "Active" mode has been working perfectly or very well * and expected "search" throughput (under perfect * conditions) at candidate rate is above expected * "active" throughput (under perfect conditions). */ if ((((100 * tpt_tbl[rate]) > lq_sta->last_tpt) && ((active_sr > IWL_RATE_DECREASE_TH) && (active_sr <= IWL_RATE_HIGH_TH) && (tpt_tbl[rate] <= active_tpt))) || ((active_sr >= IWL_RATE_SCALE_SWITCH) && (tpt_tbl[rate] > active_tpt))) { /* (2nd or later pass) * If we've already tried to raise the rate, and are * now trying to lower it, use the higher rate. */ if (start_hi != IWL_RATE_INVALID) { new_rate = start_hi; break; } new_rate = rate; /* Loop again with lower rate */ if (low != IWL_RATE_INVALID) rate = low; /* Lower rate not available, use the original */ else break; /* Else try to raise the "search" rate to match "active" */ } else { /* (2nd or later pass) * If we've already tried to lower the rate, and are * now trying to raise it, use the lower rate. */ if (new_rate != IWL_RATE_INVALID) break; /* Loop again with higher rate */ else if (high != IWL_RATE_INVALID) { start_hi = high; rate = high; /* Higher rate not available, use the original */ } else { new_rate = rate; break; } } } return new_rate; } /* Move to the next action and wrap around to the first action in case * we're at the last action. Assumes actions start at 0. */ static inline void rs_move_next_action(struct iwl_scale_tbl_info *tbl, u8 last_action) { BUILD_BUG_ON(IWL_LEGACY_FIRST_ACTION != 0); BUILD_BUG_ON(IWL_SISO_FIRST_ACTION != 0); BUILD_BUG_ON(IWL_MIMO2_FIRST_ACTION != 0); tbl->action = (tbl->action + 1) % (last_action + 1); } static void rs_set_bw_from_sta(struct iwl_scale_tbl_info *tbl, struct ieee80211_sta *sta) { if (sta->bandwidth >= IEEE80211_STA_RX_BW_80) tbl->bw = RATE_MCS_CHAN_WIDTH_80; else if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) tbl->bw = RATE_MCS_CHAN_WIDTH_40; else tbl->bw = RATE_MCS_CHAN_WIDTH_20; } static bool rs_sgi_allowed(struct iwl_scale_tbl_info *tbl, struct ieee80211_sta *sta) { struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; if (is_ht20(tbl) && (ht_cap->cap & IEEE80211_HT_CAP_SGI_20)) return true; if (is_ht40(tbl) && (ht_cap->cap & IEEE80211_HT_CAP_SGI_40)) return true; if (is_ht80(tbl) && (vht_cap->cap & IEEE80211_VHT_CAP_SHORT_GI_80)) return true; return false; } /* * Set up search table for MIMO2 */ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct ieee80211_sta *sta, struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; s32 rate; if (!sta->ht_cap.ht_supported) return -1; if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ if (num_of_ant(iwl_fw_valid_tx_ant(mvm->fw)) < 2) return -1; IWL_DEBUG_RATE(mvm, "LQ: try to switch to MIMO2\n"); tbl->lq_type = lq_sta->is_vht ? LQ_VHT_MIMO2 : LQ_HT_MIMO2; tbl->action = 0; tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; rs_set_bw_from_sta(tbl, sta); rs_set_expected_tpt_table(lq_sta, tbl); rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); IWL_DEBUG_RATE(mvm, "LQ: MIMO2 best rate %d mask %X\n", rate, rate_mask); if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { IWL_DEBUG_RATE(mvm, "Can't switch with index %d rate mask %x\n", rate, rate_mask); return -1; } tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate); IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index\n", tbl->current_rate); return 0; } /* * Set up search table for SISO */ static int rs_switch_to_siso(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct ieee80211_sta *sta, struct iwl_scale_tbl_info *tbl, int index) { u16 rate_mask; s32 rate; if (!sta->ht_cap.ht_supported) return -1; IWL_DEBUG_RATE(mvm, "LQ: try to switch to SISO\n"); tbl->lq_type = lq_sta->is_vht ? LQ_VHT_SISO : LQ_HT_SISO; tbl->action = 0; tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; rs_set_bw_from_sta(tbl, sta); rs_set_expected_tpt_table(lq_sta, tbl); rate = rs_get_best_rate(mvm, lq_sta, tbl, rate_mask, index); IWL_DEBUG_RATE(mvm, "LQ: get best rate %d mask %X\n", rate, rate_mask); if ((rate == IWL_RATE_INVALID) || !((1 << rate) & rate_mask)) { IWL_DEBUG_RATE(mvm, "can not switch with index %d rate mask %x\n", rate, rate_mask); return -1; } tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, rate); IWL_DEBUG_RATE(mvm, "LQ: Switch to new mcs %X index\n", tbl->current_rate); return 0; } /* * Try to switch to new modulation mode from legacy */ static int rs_move_legacy_other(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct ieee80211_sta *sta, int index) { struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); struct iwl_scale_tbl_info *search_tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); struct iwl_rate_scale_data *window = &(tbl->win[index]); u32 sz = (sizeof(struct iwl_scale_tbl_info) - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action; u8 valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); u8 tx_chains_num = num_of_ant(valid_tx_ant); int ret; u8 update_search_tbl_counter = 0; start_action = tbl->action; while (1) { lq_sta->action_counter++; switch (tbl->action) { case IWL_LEGACY_SWITCH_ANTENNA: IWL_DEBUG_RATE(mvm, "LQ: Legacy toggle Antenna\n"); if (tx_chains_num <= 1) break; /* Don't change antenna if success has been great */ if (window->success_ratio >= IWL_RS_GOOD_RATIO) break; /* Set up search table to try other antenna */ memcpy(search_tbl, tbl, sz); if (rs_toggle_antenna(valid_tx_ant, &search_tbl->current_rate, search_tbl)) { update_search_tbl_counter = 1; rs_set_expected_tpt_table(lq_sta, search_tbl); goto out; } break; case IWL_LEGACY_SWITCH_SISO: IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to SISO\n"); /* Set up search table to try SISO */ memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; ret = rs_switch_to_siso(mvm, lq_sta, sta, search_tbl, index); if (!ret) { lq_sta->action_counter = 0; goto out; } break; case IWL_LEGACY_SWITCH_MIMO2: IWL_DEBUG_RATE(mvm, "LQ: Legacy switch to MIMO2\n"); /* Set up search table to try MIMO */ memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; search_tbl->ant_type = ANT_AB; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) break; ret = rs_switch_to_mimo2(mvm, lq_sta, sta, search_tbl, index); if (!ret) { lq_sta->action_counter = 0; goto out; } break; default: WARN_ON_ONCE(1); } rs_move_next_action(tbl, IWL_LEGACY_LAST_ACTION); if (tbl->action == start_action) break; } search_tbl->lq_type = LQ_NONE; return 0; out: lq_sta->search_better_tbl = 1; rs_move_next_action(tbl, IWL_LEGACY_LAST_ACTION); if (update_search_tbl_counter) search_tbl->action = tbl->action; return 0; } /* * Try to switch to new modulation mode from SISO */ static int rs_move_siso_to_other(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct ieee80211_sta *sta, int index) { struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); struct iwl_scale_tbl_info *search_tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); struct iwl_rate_scale_data *window = &(tbl->win[index]); u32 sz = (sizeof(struct iwl_scale_tbl_info) - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action; u8 valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); u8 tx_chains_num = num_of_ant(valid_tx_ant); u8 update_search_tbl_counter = 0; int ret; switch (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)) { case IWL_BT_COEX_TRAFFIC_LOAD_NONE: /* nothing */ break; case IWL_BT_COEX_TRAFFIC_LOAD_LOW: /* avoid switching to antenna B but allow MIMO */ if (tbl->action == IWL_SISO_SWITCH_ANTENNA && tbl->ant_type == ANT_A) tbl->action = IWL_SISO_SWITCH_MIMO2; break; case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: /* A - avoid antenna B and MIMO. B - switch to A */ if (tbl->ant_type == ANT_A) valid_tx_ant = first_antenna(iwl_fw_valid_tx_ant(mvm->fw)); tbl->action = IWL_SISO_SWITCH_ANTENNA; break; default: IWL_ERR(mvm, "Invalid BT load %d", le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)); break; } start_action = tbl->action; while (1) { lq_sta->action_counter++; switch (tbl->action) { case IWL_SISO_SWITCH_ANTENNA: IWL_DEBUG_RATE(mvm, "LQ: SISO toggle Antenna\n"); if (tx_chains_num <= 1) break; if (window->success_ratio >= IWL_RS_GOOD_RATIO && BT_MBOX_MSG(&mvm->last_bt_notif, 3, TRAFFIC_LOAD) == 0) break; memcpy(search_tbl, tbl, sz); if (rs_toggle_antenna(valid_tx_ant, &search_tbl->current_rate, search_tbl)) { update_search_tbl_counter = 1; goto out; } break; case IWL_SISO_SWITCH_MIMO2: IWL_DEBUG_RATE(mvm, "LQ: SISO switch to MIMO2\n"); memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = 0; search_tbl->ant_type = ANT_AB; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) break; ret = rs_switch_to_mimo2(mvm, lq_sta, sta, search_tbl, index); if (!ret) goto out; break; case IWL_SISO_SWITCH_GI: if (!rs_sgi_allowed(tbl, sta)) break; IWL_DEBUG_RATE(mvm, "LQ: SISO toggle SGI/NGI\n"); memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = !tbl->is_SGI; rs_set_expected_tpt_table(lq_sta, search_tbl); if (tbl->is_SGI) { s32 tpt = lq_sta->last_tpt / 100; if (tpt >= search_tbl->expected_tpt[index]) break; } search_tbl->current_rate = rate_n_flags_from_tbl(mvm, search_tbl, index); update_search_tbl_counter = 1; goto out; default: WARN_ON_ONCE(1); } rs_move_next_action(tbl, IWL_SISO_LAST_ACTION); if (tbl->action == start_action) break; } search_tbl->lq_type = LQ_NONE; return 0; out: lq_sta->search_better_tbl = 1; rs_move_next_action(tbl, IWL_SISO_LAST_ACTION); if (update_search_tbl_counter) search_tbl->action = tbl->action; return 0; } /* * Try to switch to new modulation mode from MIMO2 */ static int rs_move_mimo2_to_other(struct iwl_mvm *mvm, struct iwl_lq_sta *lq_sta, struct ieee80211_sta *sta, int index) { struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); struct iwl_scale_tbl_info *search_tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); u32 sz = (sizeof(struct iwl_scale_tbl_info) - (sizeof(struct iwl_rate_scale_data) * IWL_RATE_COUNT)); u8 start_action; u8 valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); u8 update_search_tbl_counter = 0; int ret; switch (le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)) { case IWL_BT_COEX_TRAFFIC_LOAD_NONE: /* nothing */ break; case IWL_BT_COEX_TRAFFIC_LOAD_HIGH: case IWL_BT_COEX_TRAFFIC_LOAD_CONTINUOUS: /* avoid antenna B and MIMO */ if (tbl->action != IWL_MIMO2_SWITCH_SISO_A) tbl->action = IWL_MIMO2_SWITCH_SISO_A; break; case IWL_BT_COEX_TRAFFIC_LOAD_LOW: /* avoid antenna B unless MIMO */ if (tbl->action == IWL_MIMO2_SWITCH_SISO_B) tbl->action = IWL_MIMO2_SWITCH_SISO_A; break; default: IWL_ERR(mvm, "Invalid BT load %d", le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)); break; } start_action = tbl->action; while (1) { lq_sta->action_counter++; switch (tbl->action) { case IWL_MIMO2_SWITCH_SISO_A: case IWL_MIMO2_SWITCH_SISO_B: IWL_DEBUG_RATE(mvm, "LQ: MIMO2 switch to SISO\n"); /* Set up new search table for SISO */ memcpy(search_tbl, tbl, sz); if (tbl->action == IWL_MIMO2_SWITCH_SISO_A) search_tbl->ant_type = ANT_A; else /* tbl->action == IWL_MIMO2_SWITCH_SISO_B */ search_tbl->ant_type = ANT_B; if (!rs_is_valid_ant(valid_tx_ant, search_tbl->ant_type)) break; ret = rs_switch_to_siso(mvm, lq_sta, sta, search_tbl, index); if (!ret) goto out; break; case IWL_MIMO2_SWITCH_GI: if (!rs_sgi_allowed(tbl, sta)) break; IWL_DEBUG_RATE(mvm, "LQ: MIMO2 toggle SGI/NGI\n"); /* Set up new search table for MIMO2 */ memcpy(search_tbl, tbl, sz); search_tbl->is_SGI = !tbl->is_SGI; rs_set_expected_tpt_table(lq_sta, search_tbl); /* * If active table already uses the fastest possible * modulation (dual stream with short guard interval), * and it's working well, there's no need to look * for a better type of modulation! */ if (tbl->is_SGI) { s32 tpt = lq_sta->last_tpt / 100; if (tpt >= search_tbl->expected_tpt[index]) break; } search_tbl->current_rate = rate_n_flags_from_tbl(mvm, search_tbl, index); update_search_tbl_counter = 1; goto out; default: WARN_ON_ONCE(1); } rs_move_next_action(tbl, IWL_MIMO2_LAST_ACTION); if (tbl->action == start_action) break; } search_tbl->lq_type = LQ_NONE; return 0; out: lq_sta->search_better_tbl = 1; rs_move_next_action(tbl, IWL_MIMO2_LAST_ACTION); if (update_search_tbl_counter) search_tbl->action = tbl->action; return 0; } /* * Check whether we should continue using same modulation mode, or * begin search for a new mode, based on: * 1) # tx successes or failures while using this mode * 2) # times calling this function * 3) elapsed time in this mode (not used, for now) */ static void rs_stay_in_table(struct iwl_lq_sta *lq_sta, bool force_search) { struct iwl_scale_tbl_info *tbl; int i; int active_tbl; int flush_interval_passed = 0; struct iwl_mvm *mvm; mvm = lq_sta->drv; active_tbl = lq_sta->active_tbl; tbl = &(lq_sta->lq_info[active_tbl]); /* If we've been disallowing search, see if we should now allow it */ if (lq_sta->stay_in_tbl) { /* Elapsed time using current modulation mode */ if (lq_sta->flush_timer) flush_interval_passed = time_after(jiffies, (unsigned long)(lq_sta->flush_timer + IWL_RATE_SCALE_FLUSH_INTVL)); /* * Check if we should allow search for new modulation mode. * If many frames have failed or succeeded, or we've used * this same modulation for a long time, allow search, and * reset history stats that keep track of whether we should * allow a new search. Also (below) reset all bitmaps and * stats in active history. */ if (force_search || (lq_sta->total_failed > lq_sta->max_failure_limit) || (lq_sta->total_success > lq_sta->max_success_limit) || ((!lq_sta->search_better_tbl) && (lq_sta->flush_timer) && (flush_interval_passed))) { IWL_DEBUG_RATE(mvm, "LQ: stay is expired %d %d %d\n", lq_sta->total_failed, lq_sta->total_success, flush_interval_passed); /* Allow search for new mode */ lq_sta->stay_in_tbl = 0; /* only place reset */ lq_sta->total_failed = 0; lq_sta->total_success = 0; lq_sta->flush_timer = 0; /* * Else if we've used this modulation mode enough repetitions * (regardless of elapsed time or success/failure), reset * history bitmaps and rate-specific stats for all rates in * active table. */ } else { lq_sta->table_count++; if (lq_sta->table_count >= lq_sta->table_count_limit) { lq_sta->table_count = 0; IWL_DEBUG_RATE(mvm, "LQ: stay in table clear win\n"); for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window( &(tbl->win[i])); } } /* If transitioning to allow "search", reset all history * bitmaps and stats in active table (this will become the new * "search" table). */ if (!lq_sta->stay_in_tbl) { for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&(tbl->win[i])); } } } /* * setup rate table in uCode */ static void rs_update_rate_tbl(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, struct iwl_scale_tbl_info *tbl, int index) { u32 rate; /* Update uCode's rate table. */ rate = rate_n_flags_from_tbl(mvm, tbl, index); rs_fill_link_cmd(mvm, sta, lq_sta, rate); iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); } static u8 rs_get_tid(struct iwl_lq_sta *lq_data, struct ieee80211_hdr *hdr) { u8 tid = IWL_MAX_TID_COUNT; if (ieee80211_is_data_qos(hdr->frame_control)) { u8 *qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & 0xf; } if (unlikely(tid > IWL_MAX_TID_COUNT)) tid = IWL_MAX_TID_COUNT; return tid; } /* * Do rate scaling and search for new modulation mode. */ static void rs_rate_scale_perform(struct iwl_mvm *mvm, struct sk_buff *skb, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; int low = IWL_RATE_INVALID; int high = IWL_RATE_INVALID; int index; int i; struct iwl_rate_scale_data *window = NULL; int current_tpt = IWL_INVALID_VALUE; int low_tpt = IWL_INVALID_VALUE; int high_tpt = IWL_INVALID_VALUE; u32 fail_count; s8 scale_action = 0; u16 rate_mask; u8 update_lq = 0; struct iwl_scale_tbl_info *tbl, *tbl1; u16 rate_scale_index_msk = 0; u8 active_tbl = 0; u8 done_search = 0; u16 high_low; s32 sr; u8 tid = IWL_MAX_TID_COUNT; struct iwl_mvm_sta *sta_priv = (void *)sta->drv_priv; struct iwl_mvm_tid_data *tid_data; IWL_DEBUG_RATE(mvm, "rate scale calculate new rate for skb\n"); /* Send management frames and NO_ACK data using lowest rate. */ /* TODO: this could probably be improved.. */ if (!ieee80211_is_data(hdr->frame_control) || info->flags & IEEE80211_TX_CTL_NO_ACK) return; lq_sta->supp_rates = sta->supp_rates[lq_sta->band]; tid = rs_get_tid(lq_sta, hdr); if ((tid != IWL_MAX_TID_COUNT) && (lq_sta->tx_agg_tid_en & (1 << tid))) { tid_data = &sta_priv->tid_data[tid]; if (tid_data->state == IWL_AGG_OFF) lq_sta->is_agg = 0; else lq_sta->is_agg = 1; } else { lq_sta->is_agg = 0; } /* * Select rate-scale / modulation-mode table to work with in * the rest of this function: "search" if searching for better * modulation mode, or "active" if doing rate scaling within a mode. */ if (!lq_sta->search_better_tbl) active_tbl = lq_sta->active_tbl; else active_tbl = 1 - lq_sta->active_tbl; tbl = &(lq_sta->lq_info[active_tbl]); /* current tx rate */ index = lq_sta->last_txrate_idx; IWL_DEBUG_RATE(mvm, "Rate scale index %d for type %d\n", index, tbl->lq_type); /* rates available for this association, and for modulation mode */ rate_mask = rs_get_supported_rates(lq_sta, hdr, tbl->lq_type); IWL_DEBUG_RATE(mvm, "mask 0x%04X\n", rate_mask); /* mask with station rate restriction */ if (is_legacy(tbl->lq_type)) { if (lq_sta->band == IEEE80211_BAND_5GHZ) /* supp_rates has no CCK bits in A mode */ rate_scale_index_msk = (u16) (rate_mask & (lq_sta->supp_rates << IWL_FIRST_OFDM_RATE)); else rate_scale_index_msk = (u16) (rate_mask & lq_sta->supp_rates); } else { rate_scale_index_msk = rate_mask; } if (!rate_scale_index_msk) rate_scale_index_msk = rate_mask; if (!((1 << index) & rate_scale_index_msk)) { IWL_ERR(mvm, "Current Rate is not valid\n"); if (lq_sta->search_better_tbl) { /* revert to active table if search table is not valid*/ tbl->lq_type = LQ_NONE; lq_sta->search_better_tbl = 0; tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); /* get "active" rate info */ index = iwl_hwrate_to_plcp_idx(tbl->current_rate); rs_update_rate_tbl(mvm, sta, lq_sta, tbl, index); } return; } /* Get expected throughput table and history window for current rate */ if (!tbl->expected_tpt) { IWL_ERR(mvm, "tbl->expected_tpt is NULL\n"); return; } /* force user max rate if set by user */ if ((lq_sta->max_rate_idx != -1) && (lq_sta->max_rate_idx < index)) { index = lq_sta->max_rate_idx; update_lq = 1; window = &(tbl->win[index]); goto lq_update; } window = &(tbl->win[index]); /* * If there is not enough history to calculate actual average * throughput, keep analyzing results of more tx frames, without * changing rate or mode (bypass most of the rest of this function). * Set up new rate table in uCode only if old rate is not supported * in current association (use new rate found above). */ fail_count = window->counter - window->success_counter; if ((fail_count < IWL_RATE_MIN_FAILURE_TH) && (window->success_counter < IWL_RATE_MIN_SUCCESS_TH)) { IWL_DEBUG_RATE(mvm, "LQ: still below TH. succ=%d total=%d for index %d\n", window->success_counter, window->counter, index); /* Can't calculate this yet; not enough history */ window->average_tpt = IWL_INVALID_VALUE; /* Should we stay with this modulation mode, * or search for a new one? */ rs_stay_in_table(lq_sta, false); goto out; } /* Else we have enough samples; calculate estimate of * actual average throughput */ if (window->average_tpt != ((window->success_ratio * tbl->expected_tpt[index] + 64) / 128)) { IWL_ERR(mvm, "expected_tpt should have been calculated by now\n"); window->average_tpt = ((window->success_ratio * tbl->expected_tpt[index] + 64) / 128); } /* If we are searching for better modulation mode, check success. */ if (lq_sta->search_better_tbl) { /* If good success, continue using the "search" mode; * no need to send new link quality command, since we're * continuing to use the setup that we've been trying. */ if (window->average_tpt > lq_sta->last_tpt) { IWL_DEBUG_RATE(mvm, "LQ: SWITCHING TO NEW TABLE suc=%d cur-tpt=%d old-tpt=%d\n", window->success_ratio, window->average_tpt, lq_sta->last_tpt); if (!is_legacy(tbl->lq_type)) lq_sta->enable_counter = 1; /* Swap tables; "search" becomes "active" */ lq_sta->active_tbl = active_tbl; current_tpt = window->average_tpt; /* Else poor success; go back to mode in "active" table */ } else { IWL_DEBUG_RATE(mvm, "LQ: GOING BACK TO THE OLD TABLE suc=%d cur-tpt=%d old-tpt=%d\n", window->success_ratio, window->average_tpt, lq_sta->last_tpt); /* Nullify "search" table */ tbl->lq_type = LQ_NONE; /* Revert to "active" table */ active_tbl = lq_sta->active_tbl; tbl = &(lq_sta->lq_info[active_tbl]); /* Revert to "active" rate and throughput info */ index = iwl_hwrate_to_plcp_idx(tbl->current_rate); current_tpt = lq_sta->last_tpt; /* Need to set up a new rate table in uCode */ update_lq = 1; } /* Either way, we've made a decision; modulation mode * search is done, allow rate adjustment next time. */ lq_sta->search_better_tbl = 0; done_search = 1; /* Don't switch modes below! */ goto lq_update; } /* (Else) not in search of better modulation mode, try for better * starting rate, while staying in this mode. */ high_low = rs_get_adjacent_rate(mvm, index, rate_scale_index_msk, tbl->lq_type); low = high_low & 0xff; high = (high_low >> 8) & 0xff; /* If user set max rate, dont allow higher than user constrain */ if ((lq_sta->max_rate_idx != -1) && (lq_sta->max_rate_idx < high)) high = IWL_RATE_INVALID; sr = window->success_ratio; /* Collect measured throughputs for current and adjacent rates */ current_tpt = window->average_tpt; if (low != IWL_RATE_INVALID) low_tpt = tbl->win[low].average_tpt; if (high != IWL_RATE_INVALID) high_tpt = tbl->win[high].average_tpt; scale_action = 0; /* Too many failures, decrease rate */ if ((sr <= IWL_RATE_DECREASE_TH) || (current_tpt == 0)) { IWL_DEBUG_RATE(mvm, "decrease rate because of low success_ratio\n"); scale_action = -1; /* No throughput measured yet for adjacent rates; try increase. */ } else if ((low_tpt == IWL_INVALID_VALUE) && (high_tpt == IWL_INVALID_VALUE)) { if (high != IWL_RATE_INVALID && sr >= IWL_RATE_INCREASE_TH) scale_action = 1; else if (low != IWL_RATE_INVALID) scale_action = 0; } /* Both adjacent throughputs are measured, but neither one has better * throughput; we're using the best rate, don't change it! */ else if ((low_tpt != IWL_INVALID_VALUE) && (high_tpt != IWL_INVALID_VALUE) && (low_tpt < current_tpt) && (high_tpt < current_tpt)) scale_action = 0; /* At least one adjacent rate's throughput is measured, * and may have better performance. */ else { /* Higher adjacent rate's throughput is measured */ if (high_tpt != IWL_INVALID_VALUE) { /* Higher rate has better throughput */ if (high_tpt > current_tpt && sr >= IWL_RATE_INCREASE_TH) { scale_action = 1; } else { scale_action = 0; } /* Lower adjacent rate's throughput is measured */ } else if (low_tpt != IWL_INVALID_VALUE) { /* Lower rate has better throughput */ if (low_tpt > current_tpt) { IWL_DEBUG_RATE(mvm, "decrease rate because of low tpt\n"); scale_action = -1; } else if (sr >= IWL_RATE_INCREASE_TH) { scale_action = 1; } } } /* Sanity check; asked for decrease, but success rate or throughput * has been good at old rate. Don't change it. */ if ((scale_action == -1) && (low != IWL_RATE_INVALID) && ((sr > IWL_RATE_HIGH_TH) || (current_tpt > (100 * tbl->expected_tpt[low])))) scale_action = 0; if ((le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && (is_mimo(tbl->lq_type))) { if (lq_sta->last_bt_traffic > le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)) { /* * don't set scale_action, don't want to scale up if * the rate scale doesn't otherwise think that is a * good idea. */ } else if (lq_sta->last_bt_traffic <= le32_to_cpu(mvm->last_bt_notif.bt_activity_grading)) { scale_action = -1; } } lq_sta->last_bt_traffic = le32_to_cpu(mvm->last_bt_notif.bt_activity_grading); if ((le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) && is_mimo(tbl->lq_type)) { /* search for a new modulation */ rs_stay_in_table(lq_sta, true); goto lq_update; } switch (scale_action) { case -1: /* Decrease starting rate, update uCode's rate table */ if (low != IWL_RATE_INVALID) { update_lq = 1; index = low; } break; case 1: /* Increase starting rate, update uCode's rate table */ if (high != IWL_RATE_INVALID) { update_lq = 1; index = high; } break; case 0: /* No change */ default: break; } IWL_DEBUG_RATE(mvm, "choose rate scale index %d action %d low %d high %d type %d\n", index, scale_action, low, high, tbl->lq_type); lq_update: /* Replace uCode's rate table for the destination station. */ if (update_lq) rs_update_rate_tbl(mvm, sta, lq_sta, tbl, index); rs_stay_in_table(lq_sta, false); /* * Search for new modulation mode if we're: * 1) Not changing rates right now * 2) Not just finishing up a search * 3) Allowing a new search */ if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { /* Save current throughput to compare with "search" throughput*/ lq_sta->last_tpt = current_tpt; /* Select a new "search" modulation mode to try. * If one is found, set up the new "search" table. */ if (is_legacy(tbl->lq_type)) rs_move_legacy_other(mvm, lq_sta, sta, index); else if (is_siso(tbl->lq_type)) rs_move_siso_to_other(mvm, lq_sta, sta, index); else if (is_mimo2(tbl->lq_type)) rs_move_mimo2_to_other(mvm, lq_sta, sta, index); else WARN_ON_ONCE(1); /* If new "search" mode was selected, set up in uCode table */ if (lq_sta->search_better_tbl) { /* Access the "search" table, clear its history. */ tbl = &(lq_sta->lq_info[(1 - lq_sta->active_tbl)]); for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&(tbl->win[i])); /* Use new "search" start rate */ index = iwl_hwrate_to_plcp_idx(tbl->current_rate); IWL_DEBUG_RATE(mvm, "Switch current mcs: %X index: %d\n", tbl->current_rate, index); rs_fill_link_cmd(mvm, sta, lq_sta, tbl->current_rate); iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_ASYNC, false); } else { done_search = 1; } } if (done_search && !lq_sta->stay_in_tbl) { /* If the "active" (non-search) mode was legacy, * and we've tried switching antennas, * but we haven't been able to try HT modes (not available), * stay with best antenna legacy modulation for a while * before next round of mode comparisons. */ tbl1 = &(lq_sta->lq_info[lq_sta->active_tbl]); if (is_legacy(tbl1->lq_type) && !sta->ht_cap.ht_supported && lq_sta->action_counter > tbl1->max_search) { IWL_DEBUG_RATE(mvm, "LQ: STAY in legacy table\n"); rs_set_stay_in_table(mvm, 1, lq_sta); } /* If we're in an HT mode, and all 3 mode switch actions * have been tried and compared, stay in this best modulation * mode for a while before next round of mode comparisons. */ if (lq_sta->enable_counter && (lq_sta->action_counter >= tbl1->max_search)) { if ((lq_sta->last_tpt > IWL_AGG_TPT_THREHOLD) && (lq_sta->tx_agg_tid_en & (1 << tid)) && (tid != IWL_MAX_TID_COUNT)) { tid_data = &sta_priv->tid_data[tid]; if (tid_data->state == IWL_AGG_OFF) { IWL_DEBUG_RATE(mvm, "try to aggregate tid %d\n", tid); rs_tl_turn_on_agg(mvm, tid, lq_sta, sta); } } rs_set_stay_in_table(mvm, 0, lq_sta); } } out: tbl->current_rate = rate_n_flags_from_tbl(mvm, tbl, index); lq_sta->last_txrate_idx = index; } /** * rs_initialize_lq - Initialize a station's hardware rate table * * The uCode's station table contains a table of fallback rates * for automatic fallback during transmission. * * NOTE: This sets up a default set of values. These will be replaced later * if the driver's iwl-agn-rs rate scaling algorithm is used, instead of * rc80211_simple. * * NOTE: Run REPLY_ADD_STA command to set up station table entry, before * calling this function (which runs REPLY_TX_LINK_QUALITY_CMD, * which requires station table entry to exist). */ static void rs_initialize_lq(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, enum ieee80211_band band) { struct iwl_scale_tbl_info *tbl; int rate_idx; int i; u32 rate; u8 active_tbl = 0; u8 valid_tx_ant; if (!sta || !lq_sta) return; i = lq_sta->last_txrate_idx; valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); if (!lq_sta->search_better_tbl) active_tbl = lq_sta->active_tbl; else active_tbl = 1 - lq_sta->active_tbl; tbl = &(lq_sta->lq_info[active_tbl]); if ((i < 0) || (i >= IWL_RATE_COUNT)) i = 0; rate = iwl_rates[i].plcp; tbl->ant_type = first_antenna(valid_tx_ant); rate |= tbl->ant_type << RATE_MCS_ANT_POS; if (i >= IWL_FIRST_CCK_RATE && i <= IWL_LAST_CCK_RATE) rate |= RATE_MCS_CCK_MSK; rs_get_tbl_info_from_mcs(rate, band, tbl, &rate_idx); if (!rs_is_valid_ant(valid_tx_ant, tbl->ant_type)) rs_toggle_antenna(valid_tx_ant, &rate, tbl); rate = rate_n_flags_from_tbl(mvm, tbl, rate_idx); tbl->current_rate = rate; rs_set_expected_tpt_table(lq_sta, tbl); rs_fill_link_cmd(NULL, NULL, lq_sta, rate); /* TODO restore station should remember the lq cmd */ iwl_mvm_send_lq_cmd(mvm, &lq_sta->lq, CMD_SYNC, true); } static void rs_get_rate(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta, struct ieee80211_tx_rate_control *txrc) { struct sk_buff *skb = txrc->skb; struct ieee80211_supported_band *sband = txrc->sband; struct iwl_op_mode *op_mode __maybe_unused = (struct iwl_op_mode *)mvm_r; struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct iwl_lq_sta *lq_sta = mvm_sta; IWL_DEBUG_RATE_LIMIT(mvm, "rate scale calculate new rate for skb\n"); /* Get max rate if user set max rate */ if (lq_sta) { lq_sta->max_rate_idx = txrc->max_rate_idx; if ((sband->band == IEEE80211_BAND_5GHZ) && (lq_sta->max_rate_idx != -1)) lq_sta->max_rate_idx += IWL_FIRST_OFDM_RATE; if ((lq_sta->max_rate_idx < 0) || (lq_sta->max_rate_idx >= IWL_RATE_COUNT)) lq_sta->max_rate_idx = -1; } /* Treat uninitialized rate scaling data same as non-existing. */ if (lq_sta && !lq_sta->drv) { IWL_DEBUG_RATE(mvm, "Rate scaling not initialized yet.\n"); mvm_sta = NULL; } /* Send management frames and NO_ACK data using lowest rate. */ if (rate_control_send_low(sta, mvm_sta, txrc)) return; iwl_mvm_hwrate_to_tx_rate(lq_sta->last_rate_n_flags, info->band, &info->control.rates[0]); info->control.rates[0].count = 1; } static void *rs_alloc_sta(void *mvm_rate, struct ieee80211_sta *sta, gfp_t gfp) { struct iwl_mvm_sta *sta_priv = (struct iwl_mvm_sta *)sta->drv_priv; struct iwl_op_mode *op_mode __maybe_unused = (struct iwl_op_mode *)mvm_rate; struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); IWL_DEBUG_RATE(mvm, "create station rate scale window\n"); return &sta_priv->lq_sta; } static int rs_vht_highest_rx_mcs_index(struct ieee80211_sta_vht_cap *vht_cap, int nss) { u16 rx_mcs = le16_to_cpu(vht_cap->vht_mcs.rx_mcs_map) & (0x3 << (2 * (nss - 1))); rx_mcs >>= (2 * (nss - 1)); if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_7) return IWL_RATE_MCS_7_INDEX; else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_8) return IWL_RATE_MCS_8_INDEX; else if (rx_mcs == IEEE80211_VHT_MCS_SUPPORT_0_9) return IWL_RATE_MCS_9_INDEX; WARN_ON_ONCE(rx_mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED); return -1; } /* * Called after adding a new station to initialize rate scaling */ void iwl_mvm_rs_rate_init(struct iwl_mvm *mvm, struct ieee80211_sta *sta, enum ieee80211_band band) { int i, j; struct ieee80211_hw *hw = mvm->hw; struct ieee80211_sta_ht_cap *ht_cap = &sta->ht_cap; struct ieee80211_sta_vht_cap *vht_cap = &sta->vht_cap; struct iwl_mvm_sta *sta_priv; struct iwl_lq_sta *lq_sta; struct ieee80211_supported_band *sband; unsigned long supp; /* must be unsigned long for for_each_set_bit */ sta_priv = (struct iwl_mvm_sta *)sta->drv_priv; lq_sta = &sta_priv->lq_sta; sband = hw->wiphy->bands[band]; lq_sta->lq.sta_id = sta_priv->sta_id; for (j = 0; j < LQ_SIZE; j++) for (i = 0; i < IWL_RATE_COUNT; i++) rs_rate_scale_clear_window(&lq_sta->lq_info[j].win[i]); lq_sta->flush_timer = 0; lq_sta->supp_rates = sta->supp_rates[sband->band]; IWL_DEBUG_RATE(mvm, "LQ: *** rate scale station global init for station %d ***\n", sta_priv->sta_id); /* TODO: what is a good starting rate for STA? About middle? Maybe not * the lowest or the highest rate.. Could consider using RSSI from * previous packets? Need to have IEEE 802.1X auth succeed immediately * after assoc.. */ lq_sta->max_rate_idx = -1; lq_sta->missed_rate_counter = IWL_MISSED_RATE_MAX; lq_sta->band = sband->band; /* * active legacy rates as per supported rates bitmap */ supp = sta->supp_rates[sband->band]; lq_sta->active_legacy_rate = 0; for_each_set_bit(i, &supp, BITS_PER_LONG) lq_sta->active_legacy_rate |= BIT(sband->bitrates[i].hw_value); /* TODO: should probably account for rx_highest for both HT/VHT */ if (!vht_cap || !vht_cap->vht_supported) { /* active_siso_rate mask includes 9 MBits (bit 5), * and CCK (bits 0-3), supp_rates[] does not; * shift to convert format, force 9 MBits off. */ lq_sta->active_siso_rate = ht_cap->mcs.rx_mask[0] << 1; lq_sta->active_siso_rate |= ht_cap->mcs.rx_mask[0] & 0x1; lq_sta->active_siso_rate &= ~((u16)0x2); lq_sta->active_siso_rate <<= IWL_FIRST_OFDM_RATE; /* Same here */ lq_sta->active_mimo2_rate = ht_cap->mcs.rx_mask[1] << 1; lq_sta->active_mimo2_rate |= ht_cap->mcs.rx_mask[1] & 0x1; lq_sta->active_mimo2_rate &= ~((u16)0x2); lq_sta->active_mimo2_rate <<= IWL_FIRST_OFDM_RATE; lq_sta->is_vht = false; } else { int highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 1); if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { if (i == IWL_RATE_9M_INDEX) continue; lq_sta->active_siso_rate |= BIT(i); } } highest_mcs = rs_vht_highest_rx_mcs_index(vht_cap, 2); if (highest_mcs >= IWL_RATE_MCS_0_INDEX) { for (i = IWL_RATE_MCS_0_INDEX; i <= highest_mcs; i++) { if (i == IWL_RATE_9M_INDEX) continue; lq_sta->active_mimo2_rate |= BIT(i); } } /* TODO: avoid MCS9 in 20Mhz which isn't valid for 11ac */ lq_sta->is_vht = true; } IWL_DEBUG_RATE(mvm, "SISO-RATE=%X MIMO2-RATE=%X VHT=%d\n", lq_sta->active_siso_rate, lq_sta->active_mimo2_rate, lq_sta->is_vht); /* These values will be overridden later */ lq_sta->lq.single_stream_ant_msk = first_antenna(iwl_fw_valid_tx_ant(mvm->fw)); lq_sta->lq.dual_stream_ant_msk = iwl_fw_valid_tx_ant(mvm->fw) & ~first_antenna(iwl_fw_valid_tx_ant(mvm->fw)); if (!lq_sta->lq.dual_stream_ant_msk) { lq_sta->lq.dual_stream_ant_msk = ANT_AB; } else if (num_of_ant(iwl_fw_valid_tx_ant(mvm->fw)) == 2) { lq_sta->lq.dual_stream_ant_msk = iwl_fw_valid_tx_ant(mvm->fw); } /* as default allow aggregation for all tids */ lq_sta->tx_agg_tid_en = IWL_AGG_ALL_TID; lq_sta->drv = mvm; /* Set last_txrate_idx to lowest rate */ lq_sta->last_txrate_idx = rate_lowest_index(sband, sta); if (sband->band == IEEE80211_BAND_5GHZ) lq_sta->last_txrate_idx += IWL_FIRST_OFDM_RATE; lq_sta->is_agg = 0; #ifdef CONFIG_MAC80211_DEBUGFS lq_sta->dbg_fixed_rate = 0; #endif rs_initialize_lq(mvm, sta, lq_sta, band); } static void rs_fill_link_cmd(struct iwl_mvm *mvm, struct ieee80211_sta *sta, struct iwl_lq_sta *lq_sta, u32 new_rate) { struct iwl_scale_tbl_info tbl_type; int index = 0; int rate_idx; int repeat_rate = 0; u8 ant_toggle_cnt = 0; u8 use_ht_possible = 1; u8 valid_tx_ant = 0; struct iwl_lq_cmd *lq_cmd = &lq_sta->lq; /* Override starting rate (index 0) if needed for debug purposes */ rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Interpret new_rate (rate_n_flags) */ rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, &rate_idx); /* How many times should we repeat the initial rate? */ if (is_legacy(tbl_type.lq_type)) { ant_toggle_cnt = 1; repeat_rate = IWL_NUMBER_TRY; } else { repeat_rate = min(IWL_HT_NUMBER_TRY, LINK_QUAL_AGG_DISABLE_START_DEF - 1); } lq_cmd->mimo_delim = is_mimo(tbl_type.lq_type) ? 1 : 0; /* Fill 1st table entry (index 0) */ lq_cmd->rs_table[index] = cpu_to_le32(new_rate); if (num_of_ant(tbl_type.ant_type) == 1) lq_cmd->single_stream_ant_msk = tbl_type.ant_type; else if (num_of_ant(tbl_type.ant_type) == 2) lq_cmd->dual_stream_ant_msk = tbl_type.ant_type; /* otherwise we don't modify the existing value */ index++; repeat_rate--; if (mvm) valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); /* Fill rest of rate table */ while (index < LINK_QUAL_MAX_RETRY_NUM) { /* Repeat initial/next rate. * For legacy IWL_NUMBER_TRY == 1, this loop will not execute. * For HT IWL_HT_NUMBER_TRY == 3, this executes twice. */ while (repeat_rate > 0 && (index < LINK_QUAL_MAX_RETRY_NUM)) { if (is_legacy(tbl_type.lq_type)) { if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) ant_toggle_cnt++; else if (mvm && rs_toggle_antenna(valid_tx_ant, &new_rate, &tbl_type)) ant_toggle_cnt = 1; } /* Override next rate if needed for debug purposes */ rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Fill next table entry */ lq_cmd->rs_table[index] = cpu_to_le32(new_rate); repeat_rate--; index++; } rs_get_tbl_info_from_mcs(new_rate, lq_sta->band, &tbl_type, &rate_idx); /* Indicate to uCode which entries might be MIMO. * If initial rate was MIMO, this will finally end up * as (IWL_HT_NUMBER_TRY * 2), after 2nd pass, otherwise 0. */ if (is_mimo(tbl_type.lq_type)) lq_cmd->mimo_delim = index; /* Get next rate */ new_rate = rs_get_lower_rate(lq_sta, &tbl_type, rate_idx, use_ht_possible); /* How many times should we repeat the next rate? */ if (is_legacy(tbl_type.lq_type)) { if (ant_toggle_cnt < NUM_TRY_BEFORE_ANT_TOGGLE) ant_toggle_cnt++; else if (mvm && rs_toggle_antenna(valid_tx_ant, &new_rate, &tbl_type)) ant_toggle_cnt = 1; repeat_rate = IWL_NUMBER_TRY; } else { repeat_rate = IWL_HT_NUMBER_TRY; } /* Don't allow HT rates after next pass. * rs_get_lower_rate() will change type to LQ_LEGACY_A * or LQ_LEGACY_G. */ use_ht_possible = 0; /* Override next rate if needed for debug purposes */ rs_dbgfs_set_mcs(lq_sta, &new_rate); /* Fill next table entry */ lq_cmd->rs_table[index] = cpu_to_le32(new_rate); index++; repeat_rate--; } lq_cmd->agg_frame_cnt_limit = LINK_QUAL_AGG_FRAME_LIMIT_DEF; lq_cmd->agg_disable_start_th = LINK_QUAL_AGG_DISABLE_START_DEF; lq_cmd->agg_time_limit = cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF); if (sta) lq_cmd->agg_time_limit = cpu_to_le16(iwl_mvm_bt_coex_agg_time_limit(mvm, sta)); /* * overwrite if needed, pass aggregation time limit * to uCode in uSec - This is racy - but heh, at least it helps... */ if (mvm && le32_to_cpu(mvm->last_bt_notif.bt_activity_grading) >= 2) lq_cmd->agg_time_limit = cpu_to_le16(1200); } static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { return hw->priv; } /* rate scale requires free function to be implemented */ static void rs_free(void *mvm_rate) { return; } static void rs_free_sta(void *mvm_r, struct ieee80211_sta *sta, void *mvm_sta) { struct iwl_op_mode *op_mode __maybe_unused = mvm_r; struct iwl_mvm *mvm __maybe_unused = IWL_OP_MODE_GET_MVM(op_mode); IWL_DEBUG_RATE(mvm, "enter\n"); IWL_DEBUG_RATE(mvm, "leave\n"); } #ifdef CONFIG_MAC80211_DEBUGFS static void rs_dbgfs_set_mcs(struct iwl_lq_sta *lq_sta, u32 *rate_n_flags) { struct iwl_mvm *mvm; u8 valid_tx_ant; u8 ant_sel_tx; mvm = lq_sta->drv; valid_tx_ant = iwl_fw_valid_tx_ant(mvm->fw); if (lq_sta->dbg_fixed_rate) { ant_sel_tx = ((lq_sta->dbg_fixed_rate & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS); if ((valid_tx_ant & ant_sel_tx) == ant_sel_tx) { *rate_n_flags = lq_sta->dbg_fixed_rate; IWL_DEBUG_RATE(mvm, "Fixed rate ON\n"); } else { lq_sta->dbg_fixed_rate = 0; IWL_ERR(mvm, "Invalid antenna selection 0x%X, Valid is 0x%X\n", ant_sel_tx, valid_tx_ant); IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n"); } } else { IWL_DEBUG_RATE(mvm, "Fixed rate OFF\n"); } } static ssize_t rs_sta_dbgfs_scale_table_write(struct file *file, const char __user *user_buf, size_t count, loff_t *ppos) { struct iwl_lq_sta *lq_sta = file->private_data; struct iwl_mvm *mvm; char buf[64]; size_t buf_size; u32 parsed_rate; mvm = lq_sta->drv; memset(buf, 0, sizeof(buf)); buf_size = min(count, sizeof(buf) - 1); if (copy_from_user(buf, user_buf, buf_size)) return -EFAULT; if (sscanf(buf, "%x", &parsed_rate) == 1) lq_sta->dbg_fixed_rate = parsed_rate; else lq_sta->dbg_fixed_rate = 0; rs_program_fix_rate(mvm, lq_sta); return count; } static ssize_t rs_sta_dbgfs_scale_table_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { char *buff; int desc = 0; int i = 0; int index = 0; ssize_t ret; struct iwl_lq_sta *lq_sta = file->private_data; struct iwl_mvm *mvm; struct iwl_scale_tbl_info *tbl = &(lq_sta->lq_info[lq_sta->active_tbl]); mvm = lq_sta->drv; buff = kmalloc(1024, GFP_KERNEL); if (!buff) return -ENOMEM; desc += sprintf(buff+desc, "sta_id %d\n", lq_sta->lq.sta_id); desc += sprintf(buff+desc, "failed=%d success=%d rate=0%X\n", lq_sta->total_failed, lq_sta->total_success, lq_sta->active_legacy_rate); desc += sprintf(buff+desc, "fixed rate 0x%X\n", lq_sta->dbg_fixed_rate); desc += sprintf(buff+desc, "valid_tx_ant %s%s%s\n", (iwl_fw_valid_tx_ant(mvm->fw) & ANT_A) ? "ANT_A," : "", (iwl_fw_valid_tx_ant(mvm->fw) & ANT_B) ? "ANT_B," : "", (iwl_fw_valid_tx_ant(mvm->fw) & ANT_C) ? "ANT_C" : ""); desc += sprintf(buff+desc, "lq type %s\n", (is_legacy(tbl->lq_type)) ? "legacy" : is_vht(tbl->lq_type) ? "VHT" : "HT"); if (is_ht(tbl->lq_type)) { desc += sprintf(buff+desc, " %s", (is_siso(tbl->lq_type)) ? "SISO" : "MIMO2"); desc += sprintf(buff+desc, " %s", (is_ht20(tbl)) ? "20MHz" : (is_ht40(tbl)) ? "40MHz" : (is_ht80(tbl)) ? "80Mhz" : "BAD BW"); desc += sprintf(buff+desc, " %s %s\n", (tbl->is_SGI) ? "SGI" : "", (lq_sta->is_agg) ? "AGG on" : ""); } desc += sprintf(buff+desc, "last tx rate=0x%X\n", lq_sta->last_rate_n_flags); desc += sprintf(buff+desc, "general: flags=0x%X mimo-d=%d s-ant0x%x d-ant=0x%x\n", lq_sta->lq.flags, lq_sta->lq.mimo_delim, lq_sta->lq.single_stream_ant_msk, lq_sta->lq.dual_stream_ant_msk); desc += sprintf(buff+desc, "agg: time_limit=%d dist_start_th=%d frame_cnt_limit=%d\n", le16_to_cpu(lq_sta->lq.agg_time_limit), lq_sta->lq.agg_disable_start_th, lq_sta->lq.agg_frame_cnt_limit); desc += sprintf(buff+desc, "Start idx [0]=0x%x [1]=0x%x [2]=0x%x [3]=0x%x\n", lq_sta->lq.initial_rate_index[0], lq_sta->lq.initial_rate_index[1], lq_sta->lq.initial_rate_index[2], lq_sta->lq.initial_rate_index[3]); for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++) { index = iwl_hwrate_to_plcp_idx( le32_to_cpu(lq_sta->lq.rs_table[i])); if (is_legacy(tbl->lq_type)) { desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps\n", i, le32_to_cpu(lq_sta->lq.rs_table[i]), iwl_rate_mcs[index].mbps); } else { desc += sprintf(buff+desc, " rate[%d] 0x%X %smbps (%s)\n", i, le32_to_cpu(lq_sta->lq.rs_table[i]), iwl_rate_mcs[index].mbps, iwl_rate_mcs[index].mcs); } } ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); kfree(buff); return ret; } static const struct file_operations rs_sta_dbgfs_scale_table_ops = { .write = rs_sta_dbgfs_scale_table_write, .read = rs_sta_dbgfs_scale_table_read, .open = simple_open, .llseek = default_llseek, }; static ssize_t rs_sta_dbgfs_stats_table_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { char *buff; int desc = 0; int i, j; ssize_t ret; struct iwl_scale_tbl_info *tbl; struct iwl_lq_sta *lq_sta = file->private_data; buff = kmalloc(1024, GFP_KERNEL); if (!buff) return -ENOMEM; for (i = 0; i < LQ_SIZE; i++) { tbl = &(lq_sta->lq_info[i]); desc += sprintf(buff+desc, "%s type=%d SGI=%d BW=%s DUP=0\n" "rate=0x%X\n", lq_sta->active_tbl == i ? "*" : "x", tbl->lq_type, tbl->is_SGI, is_ht20(tbl) ? "20Mhz" : is_ht40(tbl) ? "40Mhz" : is_ht80(tbl) ? "80Mhz" : "ERR", tbl->current_rate); for (j = 0; j < IWL_RATE_COUNT; j++) { desc += sprintf(buff+desc, "counter=%d success=%d %%=%d\n", tbl->win[j].counter, tbl->win[j].success_counter, tbl->win[j].success_ratio); } } ret = simple_read_from_buffer(user_buf, count, ppos, buff, desc); kfree(buff); return ret; } static const struct file_operations rs_sta_dbgfs_stats_table_ops = { .read = rs_sta_dbgfs_stats_table_read, .open = simple_open, .llseek = default_llseek, }; static void rs_add_debugfs(void *mvm, void *mvm_sta, struct dentry *dir) { struct iwl_lq_sta *lq_sta = mvm_sta; lq_sta->rs_sta_dbgfs_scale_table_file = debugfs_create_file("rate_scale_table", S_IRUSR | S_IWUSR, dir, lq_sta, &rs_sta_dbgfs_scale_table_ops); lq_sta->rs_sta_dbgfs_stats_table_file = debugfs_create_file("rate_stats_table", S_IRUSR, dir, lq_sta, &rs_sta_dbgfs_stats_table_ops); lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file = debugfs_create_u8("tx_agg_tid_enable", S_IRUSR | S_IWUSR, dir, &lq_sta->tx_agg_tid_en); } static void rs_remove_debugfs(void *mvm, void *mvm_sta) { struct iwl_lq_sta *lq_sta = mvm_sta; debugfs_remove(lq_sta->rs_sta_dbgfs_scale_table_file); debugfs_remove(lq_sta->rs_sta_dbgfs_stats_table_file); debugfs_remove(lq_sta->rs_sta_dbgfs_tx_agg_tid_en_file); } #endif /* * Initialization of rate scaling information is done by driver after * the station is added. Since mac80211 calls this function before a * station is added we ignore it. */ static void rs_rate_init_stub(void *mvm_r, struct ieee80211_supported_band *sband, struct cfg80211_chan_def *chandef, struct ieee80211_sta *sta, void *mvm_sta) { } static struct rate_control_ops rs_mvm_ops = { .module = NULL, .name = RS_NAME, .tx_status = rs_tx_status, .get_rate = rs_get_rate, .rate_init = rs_rate_init_stub, .alloc = rs_alloc, .free = rs_free, .alloc_sta = rs_alloc_sta, .free_sta = rs_free_sta, #ifdef CONFIG_MAC80211_DEBUGFS .add_sta_debugfs = rs_add_debugfs, .remove_sta_debugfs = rs_remove_debugfs, #endif }; int iwl_mvm_rate_control_register(void) { return ieee80211_rate_control_register(&rs_mvm_ops); } void iwl_mvm_rate_control_unregister(void) { ieee80211_rate_control_unregister(&rs_mvm_ops); } /** * iwl_mvm_tx_protection - Gets LQ command, change it to enable/disable * Tx protection, according to this rquest and previous requests, * and send the LQ command. * @mvmsta: The station * @enable: Enable Tx protection? */ int iwl_mvm_tx_protection(struct iwl_mvm *mvm, struct iwl_mvm_sta *mvmsta, bool enable) { struct iwl_lq_cmd *lq = &mvmsta->lq_sta.lq; lockdep_assert_held(&mvm->mutex); if (enable) { if (mvmsta->tx_protection == 0) lq->flags |= LQ_FLAG_SET_STA_TLC_RTS_MSK; mvmsta->tx_protection++; } else { mvmsta->tx_protection--; if (mvmsta->tx_protection == 0) lq->flags &= ~LQ_FLAG_SET_STA_TLC_RTS_MSK; } return iwl_mvm_send_lq_cmd(mvm, lq, CMD_ASYNC, false); }