/* * Copyright (C) ST-Ericsson SA 2010 * * License Terms: GNU General Public License v2 * * Authors: Sundar Iyer for ST-Ericsson * Bengt Jonsson for ST-Ericsson * * AB8500 peripheral regulators * * AB8500 supports the following regulators: * VAUX1/2/3, VINTCORE, VTVOUT, VUSB, VAUDIO, VAMIC1/2, VDMIC, VANA */ #include #include #include #include #include #include #include #include #include #include #include #include #include /** * struct ab8500_regulator_info - ab8500 regulator information * @dev: device pointer * @desc: regulator description * @regulator_dev: regulator device * @is_enabled: status of regulator (on/off) * @load_lp_uA: maximum load in idle (low power) mode * @update_bank: bank to control on/off * @update_reg: register to control on/off * @update_mask: mask to enable/disable and set mode of regulator * @update_val: bits holding the regulator current mode * @update_val_idle: bits to enable the regulator in idle (low power) mode * @update_val_normal: bits to enable the regulator in normal (high power) mode * @voltage_bank: bank to control regulator voltage * @voltage_reg: register to control regulator voltage * @voltage_mask: mask to control regulator voltage * @voltage_shift: shift to control regulator voltage * @delay: startup/set voltage delay in us */ struct ab8500_regulator_info { struct device *dev; struct regulator_desc desc; struct regulator_dev *regulator; bool is_enabled; int load_lp_uA; u8 update_bank; u8 update_reg; u8 update_mask; u8 update_val; u8 update_val_idle; u8 update_val_normal; u8 voltage_bank; u8 voltage_reg; u8 voltage_mask; u8 voltage_shift; unsigned int delay; }; /* voltage tables for the vauxn/vintcore supplies */ static const unsigned int ldo_vauxn_voltages[] = { 1100000, 1200000, 1300000, 1400000, 1500000, 1800000, 1850000, 1900000, 2500000, 2650000, 2700000, 2750000, 2800000, 2900000, 3000000, 3300000, }; static const unsigned int ldo_vaux3_voltages[] = { 1200000, 1500000, 1800000, 2100000, 2500000, 2750000, 2790000, 2910000, }; static const unsigned int ldo_vintcore_voltages[] = { 1200000, 1225000, 1250000, 1275000, 1300000, 1325000, 1350000, }; static int ab8500_regulator_enable(struct regulator_dev *rdev) { int ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, info->update_mask, info->update_val); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't set enable bits for regulator\n"); return ret; } info->is_enabled = true; dev_vdbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, info->update_val); return ret; } static int ab8500_regulator_disable(struct regulator_dev *rdev) { int ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, info->update_mask, 0x0); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't set disable bits for regulator\n"); return ret; } info->is_enabled = false; dev_vdbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value): 0x%x, 0x%x, 0x%x, 0x%x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, 0x0); return ret; } static unsigned int ab8500_regulator_get_optimum_mode( struct regulator_dev *rdev, int input_uV, int output_uV, int load_uA) { unsigned int mode; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } if (load_uA <= info->load_lp_uA) mode = REGULATOR_MODE_IDLE; else mode = REGULATOR_MODE_NORMAL; return mode; } static int ab8500_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { int ret = 0; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } switch (mode) { case REGULATOR_MODE_NORMAL: info->update_val = info->update_val_normal; break; case REGULATOR_MODE_IDLE: info->update_val = info->update_val_idle; break; default: return -EINVAL; } if (info->is_enabled) { ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, info->update_mask, info->update_val); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set regulator mode\n"); dev_vdbg(rdev_get_dev(rdev), "%s-set_mode (bank, reg, mask, value): " "0x%x, 0x%x, 0x%x, 0x%x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, info->update_val); } return ret; } static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev) { struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); int ret; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } if (info->update_val == info->update_val_normal) ret = REGULATOR_MODE_NORMAL; else if (info->update_val == info->update_val_idle) ret = REGULATOR_MODE_IDLE; else ret = -EINVAL; return ret; } static int ab8500_regulator_is_enabled(struct regulator_dev *rdev) { int ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = abx500_get_register_interruptible(info->dev, info->update_bank, info->update_reg, ®val); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't read 0x%x register\n", info->update_reg); return ret; } dev_vdbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value): 0x%x, 0x%x, 0x%x," " 0x%x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); if (regval & info->update_mask) info->is_enabled = true; else info->is_enabled = false; return info->is_enabled; } static int ab8500_regulator_get_voltage_sel(struct regulator_dev *rdev) { int ret, val; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = abx500_get_register_interruptible(info->dev, info->voltage_bank, info->voltage_reg, ®val); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't read voltage reg for regulator\n"); return ret; } dev_vdbg(rdev_get_dev(rdev), "%s-get_voltage (bank, reg, mask, shift, value): " "0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n", info->desc.name, info->voltage_bank, info->voltage_reg, info->voltage_mask, info->voltage_shift, regval); val = regval & info->voltage_mask; return val >> info->voltage_shift; } static int ab8500_regulator_set_voltage_sel(struct regulator_dev *rdev, unsigned selector) { int ret; struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } /* set the registers for the request */ regval = (u8)selector << info->voltage_shift; ret = abx500_mask_and_set_register_interruptible(info->dev, info->voltage_bank, info->voltage_reg, info->voltage_mask, regval); if (ret < 0) dev_err(rdev_get_dev(rdev), "couldn't set voltage reg for regulator\n"); dev_vdbg(rdev_get_dev(rdev), "%s-set_voltage (bank, reg, mask, value): 0x%x, 0x%x, 0x%x," " 0x%x\n", info->desc.name, info->voltage_bank, info->voltage_reg, info->voltage_mask, regval); return ret; } static int ab8500_regulator_set_voltage_time_sel(struct regulator_dev *rdev, unsigned int old_sel, unsigned int new_sel) { struct ab8500_regulator_info *info = rdev_get_drvdata(rdev); return info->delay; } static struct regulator_ops ab8500_regulator_volt_mode_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, .get_optimum_mode = ab8500_regulator_get_optimum_mode, .set_mode = ab8500_regulator_set_mode, .get_mode = ab8500_regulator_get_mode, .get_voltage_sel = ab8500_regulator_get_voltage_sel, .set_voltage_sel = ab8500_regulator_set_voltage_sel, .list_voltage = regulator_list_voltage_table, .set_voltage_time_sel = ab8500_regulator_set_voltage_time_sel, }; static struct regulator_ops ab8500_regulator_mode_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, .get_optimum_mode = ab8500_regulator_get_optimum_mode, .set_mode = ab8500_regulator_set_mode, .get_mode = ab8500_regulator_get_mode, .get_voltage_sel = ab8500_regulator_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, }; static struct regulator_ops ab8500_regulator_ops = { .enable = ab8500_regulator_enable, .disable = ab8500_regulator_disable, .is_enabled = ab8500_regulator_is_enabled, .get_voltage_sel = ab8500_regulator_get_voltage_sel, .list_voltage = regulator_list_voltage_linear, }; static struct ab8500_regulator_info ab8500_regulator_info[AB8500_NUM_REGULATORS] = { /* * Variable Voltage Regulators * name, min mV, max mV, * update bank, reg, mask, enable val * volt bank, reg, mask */ [AB8500_LDO_AUX1] = { .desc = { .name = "LDO-AUX1", .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX1, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), .volt_table = ldo_vauxn_voltages, .enable_time = 200, }, .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x09, .update_mask = 0x03, .update_val = 0x01, .update_val_idle = 0x03, .update_val_normal = 0x01, .voltage_bank = 0x04, .voltage_reg = 0x1f, .voltage_mask = 0x0f, }, [AB8500_LDO_AUX2] = { .desc = { .name = "LDO-AUX2", .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX2, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vauxn_voltages), .volt_table = ldo_vauxn_voltages, .enable_time = 200, }, .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x09, .update_mask = 0x0c, .update_val = 0x04, .update_val_idle = 0x0c, .update_val_normal = 0x04, .voltage_bank = 0x04, .voltage_reg = 0x20, .voltage_mask = 0x0f, }, [AB8500_LDO_AUX3] = { .desc = { .name = "LDO-AUX3", .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUX3, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vaux3_voltages), .volt_table = ldo_vaux3_voltages, .enable_time = 450, }, .load_lp_uA = 5000, .update_bank = 0x04, .update_reg = 0x0a, .update_mask = 0x03, .update_val = 0x01, .update_val_idle = 0x03, .update_val_normal = 0x01, .voltage_bank = 0x04, .voltage_reg = 0x21, .voltage_mask = 0x07, }, [AB8500_LDO_INTCORE] = { .desc = { .name = "LDO-INTCORE", .ops = &ab8500_regulator_volt_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_INTCORE, .owner = THIS_MODULE, .n_voltages = ARRAY_SIZE(ldo_vintcore_voltages), .volt_table = ldo_vintcore_voltages, .enable_time = 750, }, .load_lp_uA = 5000, .update_bank = 0x03, .update_reg = 0x80, .update_mask = 0x44, .update_val = 0x04, .update_val_idle = 0x44, .update_val_normal = 0x04, .voltage_bank = 0x03, .voltage_reg = 0x80, .voltage_mask = 0x38, .voltage_shift = 3, }, /* * Fixed Voltage Regulators * name, fixed mV, * update bank, reg, mask, enable val */ [AB8500_LDO_TVOUT] = { .desc = { .name = "LDO-TVOUT", .ops = &ab8500_regulator_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_TVOUT, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2000000, .enable_time = 10000, }, .delay = 10000, .load_lp_uA = 1000, .update_bank = 0x03, .update_reg = 0x80, .update_mask = 0x82, .update_val = 0x02, .update_val_idle = 0x82, .update_val_normal = 0x02, }, /* * Regulators with fixed voltage and normal mode */ [AB8500_LDO_USB] = { .desc = { .name = "LDO-USB", .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_USB, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 3300000, .enable_time = 150, }, .update_bank = 0x03, .update_reg = 0x82, .update_mask = 0x03, }, [AB8500_LDO_AUDIO] = { .desc = { .name = "LDO-AUDIO", .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_AUDIO, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2000000, .enable_time = 140, }, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x02, .update_val = 0x02, }, [AB8500_LDO_ANAMIC1] = { .desc = { .name = "LDO-ANAMIC1", .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANAMIC1, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2050000, .enable_time = 500, }, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x08, .update_val = 0x08, }, [AB8500_LDO_ANAMIC2] = { .desc = { .name = "LDO-ANAMIC2", .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANAMIC2, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 2050000, .enable_time = 500, }, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x10, .update_val = 0x10, }, [AB8500_LDO_DMIC] = { .desc = { .name = "LDO-DMIC", .ops = &ab8500_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_DMIC, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 1800000, .enable_time = 420, }, .update_bank = 0x03, .update_reg = 0x83, .update_mask = 0x04, .update_val = 0x04, }, /* * Regulators with fixed voltage and normal/idle modes */ [AB8500_LDO_ANA] = { .desc = { .name = "LDO-ANA", .ops = &ab8500_regulator_mode_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_LDO_ANA, .owner = THIS_MODULE, .n_voltages = 1, .min_uV = 1200000, .enable_time = 140, }, .load_lp_uA = 1000, .update_bank = 0x04, .update_reg = 0x06, .update_mask = 0x0c, .update_val = 0x04, .update_val_idle = 0x0c, .update_val_normal = 0x04, }, }; struct ab8500_reg_init { u8 bank; u8 addr; u8 mask; }; #define REG_INIT(_id, _bank, _addr, _mask) \ [_id] = { \ .bank = _bank, \ .addr = _addr, \ .mask = _mask, \ } static struct ab8500_reg_init ab8500_reg_init[] = { /* * 0x03, VarmRequestCtrl * 0x0c, VapeRequestCtrl * 0x30, Vsmps1RequestCtrl * 0xc0, Vsmps2RequestCtrl */ REG_INIT(AB8500_REGUREQUESTCTRL1, 0x03, 0x03, 0xff), /* * 0x03, Vsmps3RequestCtrl * 0x0c, VpllRequestCtrl * 0x30, VanaRequestCtrl * 0xc0, VextSupply1RequestCtrl */ REG_INIT(AB8500_REGUREQUESTCTRL2, 0x03, 0x04, 0xff), /* * 0x03, VextSupply2RequestCtrl * 0x0c, VextSupply3RequestCtrl * 0x30, Vaux1RequestCtrl * 0xc0, Vaux2RequestCtrl */ REG_INIT(AB8500_REGUREQUESTCTRL3, 0x03, 0x05, 0xff), /* * 0x03, Vaux3RequestCtrl * 0x04, SwHPReq */ REG_INIT(AB8500_REGUREQUESTCTRL4, 0x03, 0x06, 0x07), /* * 0x01, Vsmps1SysClkReq1HPValid * 0x02, Vsmps2SysClkReq1HPValid * 0x04, Vsmps3SysClkReq1HPValid * 0x08, VanaSysClkReq1HPValid * 0x10, VpllSysClkReq1HPValid * 0x20, Vaux1SysClkReq1HPValid * 0x40, Vaux2SysClkReq1HPValid * 0x80, Vaux3SysClkReq1HPValid */ REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID1, 0x03, 0x07, 0xff), /* * 0x01, VapeSysClkReq1HPValid * 0x02, VarmSysClkReq1HPValid * 0x04, VbbSysClkReq1HPValid * 0x08, VmodSysClkReq1HPValid * 0x10, VextSupply1SysClkReq1HPValid * 0x20, VextSupply2SysClkReq1HPValid * 0x40, VextSupply3SysClkReq1HPValid */ REG_INIT(AB8500_REGUSYSCLKREQ1HPVALID2, 0x03, 0x08, 0x7f), /* * 0x01, Vsmps1HwHPReq1Valid * 0x02, Vsmps2HwHPReq1Valid * 0x04, Vsmps3HwHPReq1Valid * 0x08, VanaHwHPReq1Valid * 0x10, VpllHwHPReq1Valid * 0x20, Vaux1HwHPReq1Valid * 0x40, Vaux2HwHPReq1Valid * 0x80, Vaux3HwHPReq1Valid */ REG_INIT(AB8500_REGUHWHPREQ1VALID1, 0x03, 0x09, 0xff), /* * 0x01, VextSupply1HwHPReq1Valid * 0x02, VextSupply2HwHPReq1Valid * 0x04, VextSupply3HwHPReq1Valid * 0x08, VmodHwHPReq1Valid */ REG_INIT(AB8500_REGUHWHPREQ1VALID2, 0x03, 0x0a, 0x0f), /* * 0x01, Vsmps1HwHPReq2Valid * 0x02, Vsmps2HwHPReq2Valid * 0x03, Vsmps3HwHPReq2Valid * 0x08, VanaHwHPReq2Valid * 0x10, VpllHwHPReq2Valid * 0x20, Vaux1HwHPReq2Valid * 0x40, Vaux2HwHPReq2Valid * 0x80, Vaux3HwHPReq2Valid */ REG_INIT(AB8500_REGUHWHPREQ2VALID1, 0x03, 0x0b, 0xff), /* * 0x01, VextSupply1HwHPReq2Valid * 0x02, VextSupply2HwHPReq2Valid * 0x04, VextSupply3HwHPReq2Valid * 0x08, VmodHwHPReq2Valid */ REG_INIT(AB8500_REGUHWHPREQ2VALID2, 0x03, 0x0c, 0x0f), /* * 0x01, VapeSwHPReqValid * 0x02, VarmSwHPReqValid * 0x04, Vsmps1SwHPReqValid * 0x08, Vsmps2SwHPReqValid * 0x10, Vsmps3SwHPReqValid * 0x20, VanaSwHPReqValid * 0x40, VpllSwHPReqValid * 0x80, Vaux1SwHPReqValid */ REG_INIT(AB8500_REGUSWHPREQVALID1, 0x03, 0x0d, 0xff), /* * 0x01, Vaux2SwHPReqValid * 0x02, Vaux3SwHPReqValid * 0x04, VextSupply1SwHPReqValid * 0x08, VextSupply2SwHPReqValid * 0x10, VextSupply3SwHPReqValid * 0x20, VmodSwHPReqValid */ REG_INIT(AB8500_REGUSWHPREQVALID2, 0x03, 0x0e, 0x3f), /* * 0x02, SysClkReq2Valid1 * ... * 0x80, SysClkReq8Valid1 */ REG_INIT(AB8500_REGUSYSCLKREQVALID1, 0x03, 0x0f, 0xfe), /* * 0x02, SysClkReq2Valid2 * ... * 0x80, SysClkReq8Valid2 */ REG_INIT(AB8500_REGUSYSCLKREQVALID2, 0x03, 0x10, 0xfe), /* * 0x02, VTVoutEna * 0x04, Vintcore12Ena * 0x38, Vintcore12Sel * 0x40, Vintcore12LP * 0x80, VTVoutLP */ REG_INIT(AB8500_REGUMISC1, 0x03, 0x80, 0xfe), /* * 0x02, VaudioEna * 0x04, VdmicEna * 0x08, Vamic1Ena * 0x10, Vamic2Ena */ REG_INIT(AB8500_VAUDIOSUPPLY, 0x03, 0x83, 0x1e), /* * 0x01, Vamic1_dzout * 0x02, Vamic2_dzout */ REG_INIT(AB8500_REGUCTRL1VAMIC, 0x03, 0x84, 0x03), /* * 0x03, Vsmps1Regu * 0x0c, Vsmps1SelCtrl * 0x10, Vsmps1AutoMode * 0x20, Vsmps1PWMMode */ REG_INIT(AB8500_VSMPS1REGU, 0x04, 0x03, 0x3f), /* * 0x03, Vsmps2Regu * 0x0c, Vsmps2SelCtrl * 0x10, Vsmps2AutoMode * 0x20, Vsmps2PWMMode */ REG_INIT(AB8500_VSMPS2REGU, 0x04, 0x04, 0x3f), /* * 0x03, VpllRegu * 0x0c, VanaRegu */ REG_INIT(AB8500_VPLLVANAREGU, 0x04, 0x06, 0x0f), /* * 0x01, VrefDDREna * 0x02, VrefDDRSleepMode */ REG_INIT(AB8500_VREFDDR, 0x04, 0x07, 0x03), /* * 0x03, VextSupply1Regu * 0x0c, VextSupply2Regu * 0x30, VextSupply3Regu * 0x40, ExtSupply2Bypass * 0x80, ExtSupply3Bypass */ REG_INIT(AB8500_EXTSUPPLYREGU, 0x04, 0x08, 0xff), /* * 0x03, Vaux1Regu * 0x0c, Vaux2Regu */ REG_INIT(AB8500_VAUX12REGU, 0x04, 0x09, 0x0f), /* * 0x0c, Vrf1Regu * 0x03, Vaux3Regu */ REG_INIT(AB8500_VRF1VAUX3REGU, 0x04, 0x0a, 0x0f), /* * 0x3f, Vsmps1Sel1 */ REG_INIT(AB8500_VSMPS1SEL1, 0x04, 0x13, 0x3f), /* * 0x0f, Vaux1Sel */ REG_INIT(AB8500_VAUX1SEL, 0x04, 0x1f, 0x0f), /* * 0x0f, Vaux2Sel */ REG_INIT(AB8500_VAUX2SEL, 0x04, 0x20, 0x0f), /* * 0x07, Vaux3Sel * 0x30, Vrf1Sel */ REG_INIT(AB8500_VRF1VAUX3SEL, 0x04, 0x21, 0x37), /* * 0x01, VextSupply12LP */ REG_INIT(AB8500_REGUCTRL2SPARE, 0x04, 0x22, 0x01), /* * 0x01, VpllDisch * 0x02, Vrf1Disch * 0x04, Vaux1Disch * 0x08, Vaux2Disch * 0x10, Vaux3Disch * 0x20, Vintcore12Disch * 0x40, VTVoutDisch * 0x80, VaudioDisch */ REG_INIT(AB8500_REGUCTRLDISCH, 0x04, 0x43, 0xff), /* * 0x01, VsimDisch * 0x02, VanaDisch * 0x04, VdmicPullDownEna * 0x08, VpllPullDownEna * 0x10, VdmicDisch */ REG_INIT(AB8500_REGUCTRLDISCH2, 0x04, 0x44, 0x1f), }; static int ab8500_regulator_init_registers(struct platform_device *pdev, int id, int mask, int value) { int err; BUG_ON(value & ~mask); BUG_ON(mask & ~ab8500_reg_init[id].mask); /* initialize register */ err = abx500_mask_and_set_register_interruptible( &pdev->dev, ab8500_reg_init[id].bank, ab8500_reg_init[id].addr, mask, value); if (err < 0) { dev_err(&pdev->dev, "Failed to initialize 0x%02x, 0x%02x.\n", ab8500_reg_init[id].bank, ab8500_reg_init[id].addr); return err; } dev_vdbg(&pdev->dev, " init: 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", ab8500_reg_init[id].bank, ab8500_reg_init[id].addr, mask, value); return 0; } static int ab8500_regulator_register(struct platform_device *pdev, struct regulator_init_data *init_data, int id, struct device_node *np) { struct ab8500_regulator_info *info = NULL; struct regulator_config config = { }; int err; /* assign per-regulator data */ info = &ab8500_regulator_info[id]; info->dev = &pdev->dev; config.dev = &pdev->dev; config.init_data = init_data; config.driver_data = info; config.of_node = np; /* fix for hardware before ab8500v2.0 */ if (abx500_get_chip_id(info->dev) < 0x20) { if (info->desc.id == AB8500_LDO_AUX3) { info->desc.n_voltages = ARRAY_SIZE(ldo_vauxn_voltages); info->desc.volt_table = ldo_vauxn_voltages; info->voltage_mask = 0xf; } } /* register regulator with framework */ info->regulator = regulator_register(&info->desc, &config); if (IS_ERR(info->regulator)) { err = PTR_ERR(info->regulator); dev_err(&pdev->dev, "failed to register regulator %s\n", info->desc.name); /* when we fail, un-register all earlier regulators */ while (--id >= 0) { info = &ab8500_regulator_info[id]; regulator_unregister(info->regulator); } return err; } return 0; } static struct of_regulator_match ab8500_regulator_matches[] = { { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, }, { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, }, { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, }, { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, }, { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, }, { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, }, { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, }, { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, }, { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, }, { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, }, { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, }, }; static int ab8500_regulator_of_probe(struct platform_device *pdev, struct device_node *np) { int err, i; for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { err = ab8500_regulator_register( pdev, ab8500_regulator_matches[i].init_data, i, ab8500_regulator_matches[i].of_node); if (err) return err; } return 0; } static int ab8500_regulator_probe(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct device_node *np = pdev->dev.of_node; struct ab8500_platform_data *ppdata; struct ab8500_regulator_platform_data *pdata; int i, err; if (np) { err = of_regulator_match(&pdev->dev, np, ab8500_regulator_matches, ARRAY_SIZE(ab8500_regulator_matches)); if (err < 0) { dev_err(&pdev->dev, "Error parsing regulator init data: %d\n", err); return err; } err = ab8500_regulator_of_probe(pdev, np); return err; } if (!ab8500) { dev_err(&pdev->dev, "null mfd parent\n"); return -EINVAL; } ppdata = dev_get_platdata(ab8500->dev); if (!ppdata) { dev_err(&pdev->dev, "null parent pdata\n"); return -EINVAL; } pdata = ppdata->regulator; if (!pdata) { dev_err(&pdev->dev, "null pdata\n"); return -EINVAL; } /* make sure the platform data has the correct size */ if (pdata->num_regulator != ARRAY_SIZE(ab8500_regulator_info)) { dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); return -EINVAL; } /* initialize registers */ for (i = 0; i < pdata->num_reg_init; i++) { int id, mask, value; id = pdata->reg_init[i].id; mask = pdata->reg_init[i].mask; value = pdata->reg_init[i].value; /* check for configuration errors */ BUG_ON(id >= AB8500_NUM_REGULATOR_REGISTERS); err = ab8500_regulator_init_registers(pdev, id, mask, value); if (err < 0) return err; } /* register all regulators */ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { err = ab8500_regulator_register(pdev, &pdata->regulator[i], i, NULL); if (err < 0) return err; } return 0; } static int ab8500_regulator_remove(struct platform_device *pdev) { int i; for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { struct ab8500_regulator_info *info = NULL; info = &ab8500_regulator_info[i]; dev_vdbg(rdev_get_dev(info->regulator), "%s-remove\n", info->desc.name); regulator_unregister(info->regulator); } return 0; } static struct platform_driver ab8500_regulator_driver = { .probe = ab8500_regulator_probe, .remove = ab8500_regulator_remove, .driver = { .name = "ab8500-regulator", .owner = THIS_MODULE, }, }; static int __init ab8500_regulator_init(void) { int ret; ret = platform_driver_register(&ab8500_regulator_driver); if (ret != 0) pr_err("Failed to register ab8500 regulator: %d\n", ret); return ret; } subsys_initcall(ab8500_regulator_init); static void __exit ab8500_regulator_exit(void) { platform_driver_unregister(&ab8500_regulator_driver); } module_exit(ab8500_regulator_exit); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Sundar Iyer "); MODULE_AUTHOR("Bengt Jonsson "); MODULE_DESCRIPTION("Regulator Driver for ST-Ericsson AB8500 Mixed-Sig PMIC"); MODULE_ALIAS("platform:ab8500-regulator");