#
# EDAC Kconfig
# Copyright (c) 2003 Linux Networx
# Licensed and distributed under the GPL
#
# $Id: Kconfig,v 1.4.2.7 2005/07/08 22:05:38 dsp_llnl Exp $
#
menuconfig EDAC
tristate "EDAC - error detection and reporting (EXPERIMENTAL)"
depends on HAS_IOMEM
depends on X86 && EXPERIMENTAL
help
EDAC is designed to report errors in the core system.
These are low-level errors that are reported in the CPU or
supporting chipset: memory errors, cache errors, PCI errors,
thermal throttling, etc.. If unsure, select 'Y'.
If this code is reporting problems on your system, please
see the EDAC project web pages for more information at:
and:
There is also a mailing list for the EDAC project, which can
be found via the sourceforge page.
if EDAC
comment "Reporting subsystems"
config EDAC_DEBUG
bool "Debugging"
help
This turns on debugging information for the entire EDAC
sub-system. You can insert module with "debug_level=x", current
there're four debug levels (x=0,1,2,3 from low to high).
Usually you should select 'N'.
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
default y
help
Some systems are able to detect and correct errors in main
memory. EDAC can report statistics on memory error
detection and correction (EDAC - or commonly referred to ECC
errors). EDAC will also try to decode where these errors
occurred so that a particular failing memory module can be
replaced. If unsure, select 'Y'.
config EDAC_AMD76X
tristate "AMD 76x (760, 762, 768)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the AMD 76x
series of chipsets used with the Athlon processor.
config EDAC_E7XXX
tristate "Intel e7xxx (e7205, e7500, e7501, e7505)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
E7205, E7500, E7501 and E7505 server chipsets.
config EDAC_E752X
tristate "Intel e752x (e7520, e7525, e7320)"
depends on EDAC_MM_EDAC && PCI && X86 && HOTPLUG
help
Support for error detection and correction on the Intel
E7520, E7525, E7320 server chipsets.
config EDAC_I82875P
tristate "Intel 82875p (D82875P, E7210)"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
DP82785P and E7210 server chipsets.
config EDAC_I82860
tristate "Intel 82860"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Intel
82860 chipset.
config EDAC_R82600
tristate "Radisys 82600 embedded chipset"
depends on EDAC_MM_EDAC && PCI && X86_32
help
Support for error detection and correction on the Radisys
82600 embedded chipset.
config EDAC_I5000
tristate "Intel Greencreek/Blackford chipset"
depends on EDAC_MM_EDAC && X86 && PCI
help
Support for error detection and correction the Intel
Greekcreek/Blackford chipsets.
choice
prompt "Error detecting method"
default EDAC_POLL
config EDAC_POLL
bool "Poll for errors"
help
Poll the chipset periodically to detect errors.
endchoice
endif # EDAC