/* * ulpi.h -- ULPI defines and function prorotypes * * Copyright (C) 2010 Nokia Corporation * * This software is distributed under the terms of the GNU General * Public License ("GPL") as published by the Free Software Foundation, * version 2 of that License. */ #ifndef __LINUX_USB_ULPI_H #define __LINUX_USB_ULPI_H #include /*-------------------------------------------------------------------------*/ /* * Macros for Set and Clear * See ULPI 1.1 specification to find the registers with Set and Clear offsets */ #define ULPI_SET(a) (a + 1) #define ULPI_CLR(a) (a + 2) /*-------------------------------------------------------------------------*/ /* * Register Map */ #define ULPI_VENDOR_ID_LOW 0x00 #define ULPI_VENDOR_ID_HIGH 0x01 #define ULPI_PRODUCT_ID_LOW 0x02 #define ULPI_PRODUCT_ID_HIGH 0x03 #define ULPI_FUNC_CTRL 0x04 #define ULPI_IFC_CTRL 0x07 #define ULPI_OTG_CTRL 0x0a #define ULPI_USB_INT_EN_RISE 0x0d #define ULPI_USB_INT_EN_FALL 0x10 #define ULPI_USB_INT_STS 0x13 #define ULPI_USB_INT_LATCH 0x14 #define ULPI_DEBUG 0x15 #define ULPI_SCRATCH 0x16 /* Optional Carkit Registers */ #define ULPI_CARCIT_CTRL 0x19 #define ULPI_CARCIT_INT_DELAY 0x1c #define ULPI_CARCIT_INT_EN 0x1d #define ULPI_CARCIT_INT_STS 0x20 #define ULPI_CARCIT_INT_LATCH 0x21 #define ULPI_CARCIT_PLS_CTRL 0x22 /* Other Optional Registers */ #define ULPI_TX_POS_WIDTH 0x25 #define ULPI_TX_NEG_WIDTH 0x26 #define ULPI_POLARITY_RECOVERY 0x27 /* Access Extended Register Set */ #define ULPI_ACCESS_EXTENDED 0x2f /* Vendor Specific */ #define ULPI_VENDOR_SPECIFIC 0x30 /* Extended Registers */ #define ULPI_EXT_VENDOR_SPECIFIC 0x80 /*-------------------------------------------------------------------------*/ /* Function Control */ #define ULPI_FUNC_CTRL_XCVRSEL (1 << 0) #define ULPI_FUNC_CTRL_XCVRSEL_MASK (3 << 0) #define ULPI_FUNC_CTRL_HIGH_SPEED (0 << 0) #define ULPI_FUNC_CTRL_FULL_SPEED (1 << 0) #define ULPI_FUNC_CTRL_LOW_SPEED (2 << 0) #define ULPI_FUNC_CTRL_FS4LS (3 << 0) #define ULPI_FUNC_CTRL_TERMSELECT (1 << 2) #define ULPI_FUNC_CTRL_OPMODE (1 << 3) #define ULPI_FUNC_CTRL_OPMODE_MASK (3 << 3) #define ULPI_FUNC_CTRL_OPMODE_NORMAL (0 << 3) #define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (1 << 3) #define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (2 << 3) #define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (3 << 3) #define ULPI_FUNC_CTRL_RESET (1 << 5) #define ULPI_FUNC_CTRL_SUSPENDM (1 << 6) /* Interface Control */ #define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE (1 << 0) #define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE (1 << 1) #define ULPI_IFC_CTRL_CARKITMODE (1 << 2) #define ULPI_IFC_CTRL_CLOCKSUSPENDM (1 << 3) #define ULPI_IFC_CTRL_AUTORESUME (1 << 4) #define ULPI_IFC_CTRL_EXTERNAL_VBUS (1 << 5) #define ULPI_IFC_CTRL_PASSTHRU (1 << 6) #define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE (1 << 7) /* OTG Control */ #define ULPI_OTG_CTRL_ID_PULLUP (1 << 0) #define ULPI_OTG_CTRL_DP_PULLDOWN (1 << 1) #define ULPI_OTG_CTRL_DM_PULLDOWN (1 << 2) #define ULPI_OTG_CTRL_DISCHRGVBUS (1 << 3) #define ULPI_OTG_CTRL_CHRGVBUS (1 << 4) #define ULPI_OTG_CTRL_DRVVBUS (1 << 5) #define ULPI_OTG_CTRL_DRVVBUS_EXT (1 << 6) #define ULPI_OTG_CTRL_EXTVBUSIND (1 << 7) /* USB Interrupt Enable Rising, * USB Interrupt Enable Falling, * USB Interrupt Status and * USB Interrupt Latch */ #define ULPI_INT_HOST_DISCONNECT (1 << 0) #define ULPI_INT_VBUS_VALID (1 << 1) #define ULPI_INT_SESS_VALID (1 << 2) #define ULPI_INT_SESS_END (1 << 3) #define ULPI_INT_IDGRD (1 << 4) /* Debug */ #define ULPI_DEBUG_LINESTATE0 (1 << 0) #define ULPI_DEBUG_LINESTATE1 (1 << 1) /* Carkit Control */ #define ULPI_CARKIT_CTRL_CARKITPWR (1 << 0) #define ULPI_CARKIT_CTRL_IDGNDDRV (1 << 1) #define ULPI_CARKIT_CTRL_TXDEN (1 << 2) #define ULPI_CARKIT_CTRL_RXDEN (1 << 3) #define ULPI_CARKIT_CTRL_SPKLEFTEN (1 << 4) #define ULPI_CARKIT_CTRL_SPKRIGHTEN (1 << 5) #define ULPI_CARKIT_CTRL_MICEN (1 << 6) /* Carkit Interrupt Enable */ #define ULPI_CARKIT_INT_EN_IDFLOAT_RISE (1 << 0) #define ULPI_CARKIT_INT_EN_IDFLOAT_FALL (1 << 1) #define ULPI_CARKIT_INT_EN_CARINTDET (1 << 2) #define ULPI_CARKIT_INT_EN_DP_RISE (1 << 3) #define ULPI_CARKIT_INT_EN_DP_FALL (1 << 4) /* Carkit Interrupt Status and * Carkit Interrupt Latch */ #define ULPI_CARKIT_INT_IDFLOAT (1 << 0) #define ULPI_CARKIT_INT_CARINTDET (1 << 1) #define ULPI_CARKIT_INT_DP (1 << 2) /* Carkit Pulse Control*/ #define ULPI_CARKIT_PLS_CTRL_TXPLSEN (1 << 0) #define ULPI_CARKIT_PLS_CTRL_RXPLSEN (1 << 1) #define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN (1 << 2) #define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN (1 << 3) /*-------------------------------------------------------------------------*/ struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops, unsigned int flags); #endif /* __LINUX_USB_ULPI_H */