/* * Copyright 2013 Freescale Semiconductor, Inc. * * This file is dual-licensed: you can use it either under the terms * of the GPL or the X11 license, at your option. Note that this dual * licensing only applies to this file, and not this project as a * whole. * * a) This file is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. * * This file is distributed in the hope that it will be useful * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * Or, alternatively * * b) Permission is hereby granted, free of charge, to any person * obtaining a copy of this software and associated documentation * files (the "Software"), to deal in the Software without * restriction, including without limitation the rights to use * copy, modify, merge, publish, distribute, sublicense, and/or * sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following * conditions: * * The above copyright notice and this permission notice shall be * included in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. */ #include "vf610-pinfunc.h" #include #include #include / { aliases { can0 = &can0; can1 = &can1; ethernet0 = &fec0; ethernet1 = &fec1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; gpio3 = &gpio3; gpio4 = &gpio4; usbphy0 = &usbphy0; usbphy1 = &usbphy1; }; fxosc: fxosc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; }; sxosc: sxosc { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; reboot: syscon-reboot { compatible = "syscon-reboot"; regmap = <&src>; offset = <0x0>; mask = <0x1000>; }; soc { #address-cells = <1>; #size-cells = <1>; compatible = "simple-bus"; interrupt-parent = <&mscm_ir>; ranges; aips0: aips-bus@40000000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; mscm_cpucfg: cpucfg@40001000 { compatible = "fsl,vf610-mscm-cpucfg", "syscon"; reg = <0x40001000 0x800>; }; mscm_ir: interrupt-controller@40001800 { compatible = "fsl,vf610-mscm-ir"; reg = <0x40001800 0x400>; fsl,cpucfg = <&mscm_cpucfg>; interrupt-controller; #interrupt-cells = <2>; }; edma0: dma-controller@40018000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x40018000 0x2000>, <0x40024000 0x1000>, <0x40025000 0x1000>; dma-channels = <32>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>, <9 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX0>, <&clks VF610_CLK_DMAMUX1>; status = "disabled"; }; can0: flexcan@40020000 { compatible = "fsl,vf610-flexcan"; reg = <0x40020000 0x4000>; interrupts = <58 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN0>, <&clks VF610_CLK_FLEXCAN0>; clock-names = "ipg", "per"; status = "disabled"; }; uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; interrupts = <61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART0>; clock-names = "ipg"; dmas = <&edma0 0 2>, <&edma0 0 3>; dma-names = "rx","tx"; status = "disabled"; }; uart1: serial@40028000 { compatible = "fsl,vf610-lpuart"; reg = <0x40028000 0x1000>; interrupts = <62 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART1>; clock-names = "ipg"; dmas = <&edma0 0 4>, <&edma0 0 5>; dma-names = "rx","tx"; status = "disabled"; }; uart2: serial@40029000 { compatible = "fsl,vf610-lpuart"; reg = <0x40029000 0x1000>; interrupts = <63 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART2>; clock-names = "ipg"; dmas = <&edma0 0 6>, <&edma0 0 7>; dma-names = "rx","tx"; status = "disabled"; }; uart3: serial@4002a000 { compatible = "fsl,vf610-lpuart"; reg = <0x4002a000 0x1000>; interrupts = <64 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART3>; clock-names = "ipg"; dmas = <&edma0 0 8>, <&edma0 0 9>; dma-names = "rx","tx"; status = "disabled"; }; dspi0: dspi0@4002c000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002c000 0x1000>; interrupts = <67 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI0>; clock-names = "dspi"; spi-num-chipselects = <6>; status = "disabled"; }; dspi1: dspi1@4002d000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x4002d000 0x1000>; interrupts = <68 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI1>; clock-names = "dspi"; spi-num-chipselects = <4>; status = "disabled"; }; sai0: sai@4002f000 { compatible = "fsl,vf610-sai"; reg = <0x4002f000 0x1000>; interrupts = <84 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI0>, <&clks VF610_CLK_SAI0_DIV>, <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 17>, <&edma0 0 16>; status = "disabled"; }; sai1: sai@40030000 { compatible = "fsl,vf610-sai"; reg = <0x40030000 0x1000>; interrupts = <85 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI1>, <&clks VF610_CLK_SAI1_DIV>, <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 19>, <&edma0 0 18>; status = "disabled"; }; sai2: sai@40031000 { compatible = "fsl,vf610-sai"; reg = <0x40031000 0x1000>; interrupts = <86 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI2>, <&clks VF610_CLK_SAI2_DIV>, <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 0 21>, <&edma0 0 20>; status = "disabled"; }; sai3: sai@40032000 { compatible = "fsl,vf610-sai"; reg = <0x40032000 0x1000>; interrupts = <87 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SAI3>, <&clks VF610_CLK_SAI3_DIV>, <&clks 0>, <&clks 0>; clock-names = "bus", "mclk1", "mclk2", "mclk3"; dma-names = "tx", "rx"; dmas = <&edma0 1 9>, <&edma0 1 8>; status = "disabled"; }; pit: pit@40037000 { compatible = "fsl,vf610-pit"; reg = <0x40037000 0x1000>; interrupts = <39 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_PIT>; clock-names = "pit"; }; pwm0: pwm@40038000 { compatible = "fsl,vf610-ftm-pwm"; #pwm-cells = <3>; reg = <0x40038000 0x1000>; clock-names = "ftm_sys", "ftm_ext", "ftm_fix", "ftm_cnt_clk_en"; clocks = <&clks VF610_CLK_FTM0>, <&clks VF610_CLK_FTM0_EXT_SEL>, <&clks VF610_CLK_FTM0_FIX_SEL>, <&clks VF610_CLK_FTM0_EXT_FIX_EN>; status = "disabled"; }; pwm1: pwm@40039000 { compatible = "fsl,vf610-ftm-pwm"; #pwm-cells = <3>; reg = <0x40039000 0x1000>; clock-names = "ftm_sys", "ftm_ext", "ftm_fix", "ftm_cnt_clk_en"; clocks = <&clks VF610_CLK_FTM1>, <&clks VF610_CLK_FTM1_EXT_SEL>, <&clks VF610_CLK_FTM1_FIX_SEL>, <&clks VF610_CLK_FTM1_EXT_FIX_EN>; status = "disabled"; }; adc0: adc@4003b000 { compatible = "fsl,vf610-adc"; reg = <0x4003b000 0x1000>; interrupts = <53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; #io-channel-cells = <1>; status = "disabled"; fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; }; wdoga5: wdog@4003e000 { compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; reg = <0x4003e000 0x1000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_WDT>; clock-names = "wdog"; status = "disabled"; }; qspi0: quadspi@40044000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; reg = <0x40044000 0x1000>, <0x20000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <24 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI0_EN>, <&clks VF610_CLK_QSPI0>; clock-names = "qspi_en", "qspi"; status = "disabled"; }; iomuxc: iomuxc@40048000 { compatible = "fsl,vf610-iomuxc"; reg = <0x40048000 0x1000>; }; gpio0: gpio@40049000 { compatible = "fsl,vf610-gpio"; reg = <0x40049000 0x1000 0x400ff000 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = <107 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 0 32>; }; gpio1: gpio@4004a000 { compatible = "fsl,vf610-gpio"; reg = <0x4004a000 0x1000 0x400ff040 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = <108 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 32 32>; }; gpio2: gpio@4004b000 { compatible = "fsl,vf610-gpio"; reg = <0x4004b000 0x1000 0x400ff080 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = <109 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 64 32>; }; gpio3: gpio@4004c000 { compatible = "fsl,vf610-gpio"; reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = <110 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 96 32>; }; gpio4: gpio@4004d000 { compatible = "fsl,vf610-gpio"; reg = <0x4004d000 0x1000 0x400ff100 0x40>; gpio-controller; #gpio-cells = <2>; interrupts = <111 IRQ_TYPE_LEVEL_HIGH>; interrupt-controller; #interrupt-cells = <2>; gpio-ranges = <&iomuxc 0 128 7>; }; anatop: anatop@40050000 { compatible = "fsl,vf610-anatop", "syscon"; reg = <0x40050000 0x400>; }; usbphy0: usbphy@40050800 { compatible = "fsl,vf610-usbphy"; reg = <0x40050800 0x400>; interrupts = <50 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY0>; fsl,anatop = <&anatop>; status = "disabled"; }; usbphy1: usbphy@40050c00 { compatible = "fsl,vf610-usbphy"; reg = <0x40050c00 0x400>; interrupts = <51 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBPHY1>; fsl,anatop = <&anatop>; status = "disabled"; }; i2c0: i2c@40066000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x40066000 0x1000>; interrupts = <71 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C0>; clock-names = "ipg"; dmas = <&edma0 0 50>, <&edma0 0 51>; dma-names = "rx","tx"; status = "disabled"; }; i2c1: i2c@40067000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x40067000 0x1000>; interrupts = <72 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C1>; clock-names = "ipg"; dmas = <&edma0 0 52>, <&edma0 0 53>; dma-names = "rx","tx"; status = "disabled"; }; clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; clocks = <&sxosc>, <&fxosc>; clock-names = "sxosc", "fxosc"; #clock-cells = <1>; }; usbdev0: usb@40034000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x40034000 0x800>; interrupts = <75 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC0>; fsl,usbphy = <&usbphy0>; fsl,usbmisc = <&usbmisc0 0>; dr_mode = "peripheral"; status = "disabled"; }; usbmisc0: usb@40034800 { #index-cells = <1>; compatible = "fsl,vf610-usbmisc"; reg = <0x40034800 0x200>; clocks = <&clks VF610_CLK_USBC0>; status = "disabled"; }; src: src@4006e000 { compatible = "fsl,vf610-src", "syscon"; reg = <0x4006e000 0x1000>; interrupts = <96 IRQ_TYPE_LEVEL_HIGH>; }; }; aips1: aips-bus@40080000 { compatible = "fsl,aips-bus", "simple-bus"; #address-cells = <1>; #size-cells = <1>; ranges; edma1: dma-controller@40098000 { #dma-cells = <2>; compatible = "fsl,vf610-edma"; reg = <0x40098000 0x2000>, <0x400a1000 0x1000>, <0x400a2000 0x1000>; dma-channels = <32>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH>, <11 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "edma-tx", "edma-err"; clock-names = "dmamux0", "dmamux1"; clocks = <&clks VF610_CLK_DMAMUX2>, <&clks VF610_CLK_DMAMUX3>; status = "disabled"; }; snvs0: snvs@400a7000 { compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; reg = <0x400a7000 0x2000>; snvsrtc: snvs-rtc-lp { compatible = "fsl,sec-v4.0-mon-rtc-lp"; regmap = <&snvs0>; offset = <0x34>; interrupts = <100 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_SNVS>; clock-names = "snvs-rtc"; }; }; uart4: serial@400a9000 { compatible = "fsl,vf610-lpuart"; reg = <0x400a9000 0x1000>; interrupts = <65 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART4>; clock-names = "ipg"; status = "disabled"; }; uart5: serial@400aa000 { compatible = "fsl,vf610-lpuart"; reg = <0x400aa000 0x1000>; interrupts = <66 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_UART5>; clock-names = "ipg"; status = "disabled"; }; dspi2: dspi2@400ac000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x400ac000 0x1000>; interrupts = <69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI2>; clock-names = "dspi"; spi-num-chipselects = <2>; status = "disabled"; }; dspi3: dspi3@400ad000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-dspi"; reg = <0x400ad000 0x1000>; interrupts = <70 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_DSPI3>; clock-names = "dspi"; spi-num-chipselects = <2>; status = "disabled"; }; adc1: adc@400bb000 { compatible = "fsl,vf610-adc"; reg = <0x400bb000 0x1000>; interrupts = <54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; #io-channel-cells = <1>; status = "disabled"; fsl,adck-max-frequency = <30000000>, <40000000>, <20000000>; }; esdhc0: esdhc@400b1000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b1000 0x1000>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, <&clks VF610_CLK_ESDHC0>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; reg = <0x400b2000 0x1000>; interrupts = <28 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, <&clks VF610_CLK_ESDHC1>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; usbh1: usb@400b4000 { compatible = "fsl,vf610-usb", "fsl,imx27-usb"; reg = <0x400b4000 0x800>; interrupts = <76 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_USBC1>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc1 0>; dr_mode = "host"; status = "disabled"; }; usbmisc1: usb@400b4800 { #index-cells = <1>; compatible = "fsl,vf610-usbmisc"; reg = <0x400b4800 0x200>; clocks = <&clks VF610_CLK_USBC1>; status = "disabled"; }; ftm: ftm@400b8000 { compatible = "fsl,ftm-timer"; reg = <0x400b8000 0x1000 0x400b9000 0x1000>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH>; clock-names = "ftm-evt", "ftm-src", "ftm-evt-counter-en", "ftm-src-counter-en"; clocks = <&clks VF610_CLK_FTM2>, <&clks VF610_CLK_FTM3>, <&clks VF610_CLK_FTM2_EXT_FIX_EN>, <&clks VF610_CLK_FTM3_EXT_FIX_EN>; status = "disabled"; }; qspi1: quadspi@400c4000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-qspi"; reg = <0x400c4000 0x1000>, <0x50000000 0x10000000>; reg-names = "QuadSPI", "QuadSPI-memory"; interrupts = <25 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_QSPI1_EN>, <&clks VF610_CLK_QSPI1>; clock-names = "qspi_en", "qspi"; status = "disabled"; }; fec0: ethernet@400d0000 { compatible = "fsl,mvf600-fec"; reg = <0x400d0000 0x1000>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET0>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; fec1: ethernet@400d1000 { compatible = "fsl,mvf600-fec"; reg = <0x400d1000 0x1000>; interrupts = <79 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET1>, <&clks VF610_CLK_ENET>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; can1: flexcan@400d4000 { compatible = "fsl,vf610-flexcan"; reg = <0x400d4000 0x4000>; interrupts = <59 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_FLEXCAN1>, <&clks VF610_CLK_FLEXCAN1>; clock-names = "ipg", "per"; status = "disabled"; }; nfc: nand@400e0000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-nfc"; reg = <0x400e0000 0x4000>; interrupts = <83 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_NFC>; clock-names = "nfc"; status = "disabled"; }; i2c2: i2c@400e6000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x400e6000 0x1000>; interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C2>; clock-names = "ipg"; dmas = <&edma0 1 36>, <&edma0 1 37>; dma-names = "rx","tx"; status = "disabled"; }; i2c3: i2c@400e7000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,vf610-i2c"; reg = <0x400e7000 0x1000>; interrupts = <74 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks VF610_CLK_I2C3>; clock-names = "ipg"; dmas = <&edma0 1 38>, <&edma0 1 39>; dma-names = "rx","tx"; status = "disabled"; }; }; }; };