/* * Copyright (C) 2014 Red Hat * Copyright (C) 2014 Intel Corp. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included in * all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR * OTHER DEALINGS IN THE SOFTWARE. * * Authors: * Rob Clark * Daniel Vetter */ #include #include #include /** * drm_atomic_state_default_release - * release memory initialized by drm_atomic_state_init * @state: atomic state * * Free all the memory allocated by drm_atomic_state_init. * This is useful for drivers that subclass the atomic state. */ void drm_atomic_state_default_release(struct drm_atomic_state *state) { kfree(state->connectors); kfree(state->connector_states); kfree(state->crtcs); kfree(state->crtc_states); kfree(state->planes); kfree(state->plane_states); } EXPORT_SYMBOL(drm_atomic_state_default_release); /** * drm_atomic_state_init - init new atomic state * @dev: DRM device * @state: atomic state * * Default implementation for filling in a new atomic state. * This is useful for drivers that subclass the atomic state. */ int drm_atomic_state_init(struct drm_device *dev, struct drm_atomic_state *state) { /* TODO legacy paths should maybe do a better job about * setting this appropriately? */ state->allow_modeset = true; state->num_connector = ACCESS_ONCE(dev->mode_config.num_connector); state->crtcs = kcalloc(dev->mode_config.num_crtc, sizeof(*state->crtcs), GFP_KERNEL); if (!state->crtcs) goto fail; state->crtc_states = kcalloc(dev->mode_config.num_crtc, sizeof(*state->crtc_states), GFP_KERNEL); if (!state->crtc_states) goto fail; state->planes = kcalloc(dev->mode_config.num_total_plane, sizeof(*state->planes), GFP_KERNEL); if (!state->planes) goto fail; state->plane_states = kcalloc(dev->mode_config.num_total_plane, sizeof(*state->plane_states), GFP_KERNEL); if (!state->plane_states) goto fail; state->connectors = kcalloc(state->num_connector, sizeof(*state->connectors), GFP_KERNEL); if (!state->connectors) goto fail; state->connector_states = kcalloc(state->num_connector, sizeof(*state->connector_states), GFP_KERNEL); if (!state->connector_states) goto fail; state->dev = dev; DRM_DEBUG_ATOMIC("Allocated atomic state %p\n", state); return 0; fail: drm_atomic_state_default_release(state); return -ENOMEM; } EXPORT_SYMBOL(drm_atomic_state_init); /** * drm_atomic_state_alloc - allocate atomic state * @dev: DRM device * * This allocates an empty atomic state to track updates. */ struct drm_atomic_state * drm_atomic_state_alloc(struct drm_device *dev) { struct drm_mode_config *config = &dev->mode_config; struct drm_atomic_state *state; if (!config->funcs->atomic_state_alloc) { state = kzalloc(sizeof(*state), GFP_KERNEL); if (!state) return NULL; if (drm_atomic_state_init(dev, state) < 0) { kfree(state); return NULL; } return state; } return config->funcs->atomic_state_alloc(dev); } EXPORT_SYMBOL(drm_atomic_state_alloc); /** * drm_atomic_state_default_clear - clear base atomic state * @state: atomic state * * Default implementation for clearing atomic state. * This is useful for drivers that subclass the atomic state. */ void drm_atomic_state_default_clear(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_mode_config *config = &dev->mode_config; int i; DRM_DEBUG_ATOMIC("Clearing atomic state %p\n", state); for (i = 0; i < state->num_connector; i++) { struct drm_connector *connector = state->connectors[i]; if (!connector) continue; /* * FIXME: Async commits can race with connector unplugging and * there's currently nothing that prevents cleanup up state for * deleted connectors. As long as the callback doesn't look at * the connector we'll be fine though, so make sure that's the * case by setting all connector pointers to NULL. */ state->connector_states[i]->connector = NULL; connector->funcs->atomic_destroy_state(NULL, state->connector_states[i]); state->connectors[i] = NULL; state->connector_states[i] = NULL; } for (i = 0; i < config->num_crtc; i++) { struct drm_crtc *crtc = state->crtcs[i]; if (!crtc) continue; crtc->funcs->atomic_destroy_state(crtc, state->crtc_states[i]); state->crtcs[i] = NULL; state->crtc_states[i] = NULL; } for (i = 0; i < config->num_total_plane; i++) { struct drm_plane *plane = state->planes[i]; if (!plane) continue; plane->funcs->atomic_destroy_state(plane, state->plane_states[i]); state->planes[i] = NULL; state->plane_states[i] = NULL; } } EXPORT_SYMBOL(drm_atomic_state_default_clear); /** * drm_atomic_state_clear - clear state object * @state: atomic state * * When the w/w mutex algorithm detects a deadlock we need to back off and drop * all locks. So someone else could sneak in and change the current modeset * configuration. Which means that all the state assembled in @state is no * longer an atomic update to the current state, but to some arbitrary earlier * state. Which could break assumptions the driver's ->atomic_check likely * relies on. * * Hence we must clear all cached state and completely start over, using this * function. */ void drm_atomic_state_clear(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_mode_config *config = &dev->mode_config; if (config->funcs->atomic_state_clear) config->funcs->atomic_state_clear(state); else drm_atomic_state_default_clear(state); } EXPORT_SYMBOL(drm_atomic_state_clear); /** * drm_atomic_state_free - free all memory for an atomic state * @state: atomic state to deallocate * * This frees all memory associated with an atomic state, including all the * per-object state for planes, crtcs and connectors. */ void drm_atomic_state_free(struct drm_atomic_state *state) { struct drm_device *dev; struct drm_mode_config *config; if (!state) return; dev = state->dev; config = &dev->mode_config; drm_atomic_state_clear(state); DRM_DEBUG_ATOMIC("Freeing atomic state %p\n", state); if (config->funcs->atomic_state_free) { config->funcs->atomic_state_free(state); } else { drm_atomic_state_default_release(state); kfree(state); } } EXPORT_SYMBOL(drm_atomic_state_free); /** * drm_atomic_get_crtc_state - get crtc state * @state: global atomic state object * @crtc: crtc to get state object for * * This function returns the crtc state for the given crtc, allocating it if * needed. It will also grab the relevant crtc lock to make sure that the state * is consistent. * * Returns: * * Either the allocated state or the error code encoded into the pointer. When * the error is EDEADLK then the w/w mutex code has detected a deadlock and the * entire atomic sequence must be restarted. All other errors are fatal. */ struct drm_crtc_state * drm_atomic_get_crtc_state(struct drm_atomic_state *state, struct drm_crtc *crtc) { int ret, index = drm_crtc_index(crtc); struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_existing_crtc_state(state, crtc); if (crtc_state) return crtc_state; ret = drm_modeset_lock(&crtc->mutex, state->acquire_ctx); if (ret) return ERR_PTR(ret); crtc_state = crtc->funcs->atomic_duplicate_state(crtc); if (!crtc_state) return ERR_PTR(-ENOMEM); state->crtc_states[index] = crtc_state; state->crtcs[index] = crtc; crtc_state->state = state; DRM_DEBUG_ATOMIC("Added [CRTC:%d] %p state to %p\n", crtc->base.id, crtc_state, state); return crtc_state; } EXPORT_SYMBOL(drm_atomic_get_crtc_state); /** * drm_atomic_set_mode_for_crtc - set mode for CRTC * @state: the CRTC whose incoming state to update * @mode: kernel-internal mode to use for the CRTC, or NULL to disable * * Set a mode (originating from the kernel) on the desired CRTC state. Does * not change any other state properties, including enable, active, or * mode_changed. * * RETURNS: * Zero on success, error code on failure. Cannot return -EDEADLK. */ int drm_atomic_set_mode_for_crtc(struct drm_crtc_state *state, struct drm_display_mode *mode) { struct drm_mode_modeinfo umode; /* Early return for no change. */ if (mode && memcmp(&state->mode, mode, sizeof(*mode)) == 0) return 0; if (state->mode_blob) drm_property_unreference_blob(state->mode_blob); state->mode_blob = NULL; if (mode) { drm_mode_convert_to_umode(&umode, mode); state->mode_blob = drm_property_create_blob(state->crtc->dev, sizeof(umode), &umode); if (IS_ERR(state->mode_blob)) return PTR_ERR(state->mode_blob); drm_mode_copy(&state->mode, mode); state->enable = true; DRM_DEBUG_ATOMIC("Set [MODE:%s] for CRTC state %p\n", mode->name, state); } else { memset(&state->mode, 0, sizeof(state->mode)); state->enable = false; DRM_DEBUG_ATOMIC("Set [NOMODE] for CRTC state %p\n", state); } return 0; } EXPORT_SYMBOL(drm_atomic_set_mode_for_crtc); /** * drm_atomic_set_mode_prop_for_crtc - set mode for CRTC * @state: the CRTC whose incoming state to update * @blob: pointer to blob property to use for mode * * Set a mode (originating from a blob property) on the desired CRTC state. * This function will take a reference on the blob property for the CRTC state, * and release the reference held on the state's existing mode property, if any * was set. * * RETURNS: * Zero on success, error code on failure. Cannot return -EDEADLK. */ int drm_atomic_set_mode_prop_for_crtc(struct drm_crtc_state *state, struct drm_property_blob *blob) { if (blob == state->mode_blob) return 0; if (state->mode_blob) drm_property_unreference_blob(state->mode_blob); state->mode_blob = NULL; if (blob) { if (blob->length != sizeof(struct drm_mode_modeinfo) || drm_mode_convert_umode(&state->mode, (const struct drm_mode_modeinfo *) blob->data)) return -EINVAL; state->mode_blob = drm_property_reference_blob(blob); state->enable = true; DRM_DEBUG_ATOMIC("Set [MODE:%s] for CRTC state %p\n", state->mode.name, state); } else { memset(&state->mode, 0, sizeof(state->mode)); state->enable = false; DRM_DEBUG_ATOMIC("Set [NOMODE] for CRTC state %p\n", state); } return 0; } EXPORT_SYMBOL(drm_atomic_set_mode_prop_for_crtc); /** * drm_atomic_crtc_set_property - set property on CRTC * @crtc: the drm CRTC to set a property on * @state: the state object to update with the new property value * @property: the property to set * @val: the new property value * * Use this instead of calling crtc->atomic_set_property directly. * This function handles generic/core properties and calls out to * driver's ->atomic_set_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. * * RETURNS: * Zero on success, error code on failure */ int drm_atomic_crtc_set_property(struct drm_crtc *crtc, struct drm_crtc_state *state, struct drm_property *property, uint64_t val) { struct drm_device *dev = crtc->dev; struct drm_mode_config *config = &dev->mode_config; int ret; if (property == config->prop_active) state->active = val; else if (property == config->prop_mode_id) { struct drm_property_blob *mode = drm_property_lookup_blob(dev, val); ret = drm_atomic_set_mode_prop_for_crtc(state, mode); if (mode) drm_property_unreference_blob(mode); return ret; } else if (crtc->funcs->atomic_set_property) return crtc->funcs->atomic_set_property(crtc, state, property, val); else return -EINVAL; return 0; } EXPORT_SYMBOL(drm_atomic_crtc_set_property); /* * This function handles generic/core properties and calls out to * driver's ->atomic_get_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. */ static int drm_atomic_crtc_get_property(struct drm_crtc *crtc, const struct drm_crtc_state *state, struct drm_property *property, uint64_t *val) { struct drm_device *dev = crtc->dev; struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_active) *val = state->active; else if (property == config->prop_mode_id) *val = (state->mode_blob) ? state->mode_blob->base.id : 0; else if (crtc->funcs->atomic_get_property) return crtc->funcs->atomic_get_property(crtc, state, property, val); else return -EINVAL; return 0; } /** * drm_atomic_crtc_check - check crtc state * @crtc: crtc to check * @state: crtc state to check * * Provides core sanity checks for crtc state. * * RETURNS: * Zero on success, error code on failure */ static int drm_atomic_crtc_check(struct drm_crtc *crtc, struct drm_crtc_state *state) { /* NOTE: we explicitly don't enforce constraints such as primary * layer covering entire screen, since that is something we want * to allow (on hw that supports it). For hw that does not, it * should be checked in driver's crtc->atomic_check() vfunc. * * TODO: Add generic modeset state checks once we support those. */ if (state->active && !state->enable) { DRM_DEBUG_ATOMIC("[CRTC:%d] active without enabled\n", crtc->base.id); return -EINVAL; } /* The state->enable vs. state->mode_blob checks can be WARN_ON, * as this is a kernel-internal detail that userspace should never * be able to trigger. */ if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) && WARN_ON(state->enable && !state->mode_blob)) { DRM_DEBUG_ATOMIC("[CRTC:%d] enabled without mode blob\n", crtc->base.id); return -EINVAL; } if (drm_core_check_feature(crtc->dev, DRIVER_ATOMIC) && WARN_ON(!state->enable && state->mode_blob)) { DRM_DEBUG_ATOMIC("[CRTC:%d] disabled with mode blob\n", crtc->base.id); return -EINVAL; } return 0; } /** * drm_atomic_get_plane_state - get plane state * @state: global atomic state object * @plane: plane to get state object for * * This function returns the plane state for the given plane, allocating it if * needed. It will also grab the relevant plane lock to make sure that the state * is consistent. * * Returns: * * Either the allocated state or the error code encoded into the pointer. When * the error is EDEADLK then the w/w mutex code has detected a deadlock and the * entire atomic sequence must be restarted. All other errors are fatal. */ struct drm_plane_state * drm_atomic_get_plane_state(struct drm_atomic_state *state, struct drm_plane *plane) { int ret, index = drm_plane_index(plane); struct drm_plane_state *plane_state; plane_state = drm_atomic_get_existing_plane_state(state, plane); if (plane_state) return plane_state; ret = drm_modeset_lock(&plane->mutex, state->acquire_ctx); if (ret) return ERR_PTR(ret); plane_state = plane->funcs->atomic_duplicate_state(plane); if (!plane_state) return ERR_PTR(-ENOMEM); state->plane_states[index] = plane_state; state->planes[index] = plane; plane_state->state = state; DRM_DEBUG_ATOMIC("Added [PLANE:%d] %p state to %p\n", plane->base.id, plane_state, state); if (plane_state->crtc) { struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_crtc_state(state, plane_state->crtc); if (IS_ERR(crtc_state)) return ERR_CAST(crtc_state); } return plane_state; } EXPORT_SYMBOL(drm_atomic_get_plane_state); /** * drm_atomic_plane_set_property - set property on plane * @plane: the drm plane to set a property on * @state: the state object to update with the new property value * @property: the property to set * @val: the new property value * * Use this instead of calling plane->atomic_set_property directly. * This function handles generic/core properties and calls out to * driver's ->atomic_set_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. * * RETURNS: * Zero on success, error code on failure */ int drm_atomic_plane_set_property(struct drm_plane *plane, struct drm_plane_state *state, struct drm_property *property, uint64_t val) { struct drm_device *dev = plane->dev; struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_fb_id) { struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, val); drm_atomic_set_fb_for_plane(state, fb); if (fb) drm_framebuffer_unreference(fb); } else if (property == config->prop_crtc_id) { struct drm_crtc *crtc = drm_crtc_find(dev, val); return drm_atomic_set_crtc_for_plane(state, crtc); } else if (property == config->prop_crtc_x) { state->crtc_x = U642I64(val); } else if (property == config->prop_crtc_y) { state->crtc_y = U642I64(val); } else if (property == config->prop_crtc_w) { state->crtc_w = val; } else if (property == config->prop_crtc_h) { state->crtc_h = val; } else if (property == config->prop_src_x) { state->src_x = val; } else if (property == config->prop_src_y) { state->src_y = val; } else if (property == config->prop_src_w) { state->src_w = val; } else if (property == config->prop_src_h) { state->src_h = val; } else if (property == config->rotation_property) { state->rotation = val; } else if (plane->funcs->atomic_set_property) { return plane->funcs->atomic_set_property(plane, state, property, val); } else { return -EINVAL; } return 0; } EXPORT_SYMBOL(drm_atomic_plane_set_property); /* * This function handles generic/core properties and calls out to * driver's ->atomic_get_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. */ static int drm_atomic_plane_get_property(struct drm_plane *plane, const struct drm_plane_state *state, struct drm_property *property, uint64_t *val) { struct drm_device *dev = plane->dev; struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_fb_id) { *val = (state->fb) ? state->fb->base.id : 0; } else if (property == config->prop_crtc_id) { *val = (state->crtc) ? state->crtc->base.id : 0; } else if (property == config->prop_crtc_x) { *val = I642U64(state->crtc_x); } else if (property == config->prop_crtc_y) { *val = I642U64(state->crtc_y); } else if (property == config->prop_crtc_w) { *val = state->crtc_w; } else if (property == config->prop_crtc_h) { *val = state->crtc_h; } else if (property == config->prop_src_x) { *val = state->src_x; } else if (property == config->prop_src_y) { *val = state->src_y; } else if (property == config->prop_src_w) { *val = state->src_w; } else if (property == config->prop_src_h) { *val = state->src_h; } else if (property == config->rotation_property) { *val = state->rotation; } else if (plane->funcs->atomic_get_property) { return plane->funcs->atomic_get_property(plane, state, property, val); } else { return -EINVAL; } return 0; } static bool plane_switching_crtc(struct drm_atomic_state *state, struct drm_plane *plane, struct drm_plane_state *plane_state) { if (!plane->state->crtc || !plane_state->crtc) return false; if (plane->state->crtc == plane_state->crtc) return false; /* This could be refined, but currently there's no helper or driver code * to implement direct switching of active planes nor userspace to take * advantage of more direct plane switching without the intermediate * full OFF state. */ return true; } /** * drm_atomic_plane_check - check plane state * @plane: plane to check * @state: plane state to check * * Provides core sanity checks for plane state. * * RETURNS: * Zero on success, error code on failure */ static int drm_atomic_plane_check(struct drm_plane *plane, struct drm_plane_state *state) { unsigned int fb_width, fb_height; int ret; /* either *both* CRTC and FB must be set, or neither */ if (WARN_ON(state->crtc && !state->fb)) { DRM_DEBUG_ATOMIC("CRTC set but no FB\n"); return -EINVAL; } else if (WARN_ON(state->fb && !state->crtc)) { DRM_DEBUG_ATOMIC("FB set but no CRTC\n"); return -EINVAL; } /* if disabled, we don't care about the rest of the state: */ if (!state->crtc) return 0; /* Check whether this plane is usable on this CRTC */ if (!(plane->possible_crtcs & drm_crtc_mask(state->crtc))) { DRM_DEBUG_ATOMIC("Invalid crtc for plane\n"); return -EINVAL; } /* Check whether this plane supports the fb pixel format. */ ret = drm_plane_check_pixel_format(plane, state->fb->pixel_format); if (ret) { DRM_DEBUG_ATOMIC("Invalid pixel format %s\n", drm_get_format_name(state->fb->pixel_format)); return ret; } /* Give drivers some help against integer overflows */ if (state->crtc_w > INT_MAX || state->crtc_x > INT_MAX - (int32_t) state->crtc_w || state->crtc_h > INT_MAX || state->crtc_y > INT_MAX - (int32_t) state->crtc_h) { DRM_DEBUG_ATOMIC("Invalid CRTC coordinates %ux%u+%d+%d\n", state->crtc_w, state->crtc_h, state->crtc_x, state->crtc_y); return -ERANGE; } fb_width = state->fb->width << 16; fb_height = state->fb->height << 16; /* Make sure source coordinates are inside the fb. */ if (state->src_w > fb_width || state->src_x > fb_width - state->src_w || state->src_h > fb_height || state->src_y > fb_height - state->src_h) { DRM_DEBUG_ATOMIC("Invalid source coordinates " "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n", state->src_w >> 16, ((state->src_w & 0xffff) * 15625) >> 10, state->src_h >> 16, ((state->src_h & 0xffff) * 15625) >> 10, state->src_x >> 16, ((state->src_x & 0xffff) * 15625) >> 10, state->src_y >> 16, ((state->src_y & 0xffff) * 15625) >> 10); return -ENOSPC; } if (plane_switching_crtc(state->state, plane, state)) { DRM_DEBUG_ATOMIC("[PLANE:%d] switching CRTC directly\n", plane->base.id); return -EINVAL; } return 0; } /** * drm_atomic_get_connector_state - get connector state * @state: global atomic state object * @connector: connector to get state object for * * This function returns the connector state for the given connector, * allocating it if needed. It will also grab the relevant connector lock to * make sure that the state is consistent. * * Returns: * * Either the allocated state or the error code encoded into the pointer. When * the error is EDEADLK then the w/w mutex code has detected a deadlock and the * entire atomic sequence must be restarted. All other errors are fatal. */ struct drm_connector_state * drm_atomic_get_connector_state(struct drm_atomic_state *state, struct drm_connector *connector) { int ret, index; struct drm_mode_config *config = &connector->dev->mode_config; struct drm_connector_state *connector_state; ret = drm_modeset_lock(&config->connection_mutex, state->acquire_ctx); if (ret) return ERR_PTR(ret); index = drm_connector_index(connector); /* * Construction of atomic state updates can race with a connector * hot-add which might overflow. In this case flip the table and just * restart the entire ioctl - no one is fast enough to livelock a cpu * with physical hotplug events anyway. * * Note that we only grab the indexes once we have the right lock to * prevent hotplug/unplugging of connectors. So removal is no problem, * at most the array is a bit too large. */ if (index >= state->num_connector) { DRM_DEBUG_ATOMIC("Hot-added connector would overflow state array, restarting\n"); return ERR_PTR(-EAGAIN); } if (state->connector_states[index]) return state->connector_states[index]; connector_state = connector->funcs->atomic_duplicate_state(connector); if (!connector_state) return ERR_PTR(-ENOMEM); state->connector_states[index] = connector_state; state->connectors[index] = connector; connector_state->state = state; DRM_DEBUG_ATOMIC("Added [CONNECTOR:%d] %p state to %p\n", connector->base.id, connector_state, state); if (connector_state->crtc) { struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_crtc_state(state, connector_state->crtc); if (IS_ERR(crtc_state)) return ERR_CAST(crtc_state); } return connector_state; } EXPORT_SYMBOL(drm_atomic_get_connector_state); /** * drm_atomic_connector_set_property - set property on connector. * @connector: the drm connector to set a property on * @state: the state object to update with the new property value * @property: the property to set * @val: the new property value * * Use this instead of calling connector->atomic_set_property directly. * This function handles generic/core properties and calls out to * driver's ->atomic_set_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. * * RETURNS: * Zero on success, error code on failure */ int drm_atomic_connector_set_property(struct drm_connector *connector, struct drm_connector_state *state, struct drm_property *property, uint64_t val) { struct drm_device *dev = connector->dev; struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_crtc_id) { struct drm_crtc *crtc = drm_crtc_find(dev, val); return drm_atomic_set_crtc_for_connector(state, crtc); } else if (property == config->dpms_property) { /* setting DPMS property requires special handling, which * is done in legacy setprop path for us. Disallow (for * now?) atomic writes to DPMS property: */ return -EINVAL; } else if (connector->funcs->atomic_set_property) { return connector->funcs->atomic_set_property(connector, state, property, val); } else { return -EINVAL; } } EXPORT_SYMBOL(drm_atomic_connector_set_property); /* * This function handles generic/core properties and calls out to * driver's ->atomic_get_property() for driver properties. To ensure * consistent behavior you must call this function rather than the * driver hook directly. */ static int drm_atomic_connector_get_property(struct drm_connector *connector, const struct drm_connector_state *state, struct drm_property *property, uint64_t *val) { struct drm_device *dev = connector->dev; struct drm_mode_config *config = &dev->mode_config; if (property == config->prop_crtc_id) { *val = (state->crtc) ? state->crtc->base.id : 0; } else if (property == config->dpms_property) { *val = connector->dpms; } else if (connector->funcs->atomic_get_property) { return connector->funcs->atomic_get_property(connector, state, property, val); } else { return -EINVAL; } return 0; } int drm_atomic_get_property(struct drm_mode_object *obj, struct drm_property *property, uint64_t *val) { struct drm_device *dev = property->dev; int ret; switch (obj->type) { case DRM_MODE_OBJECT_CONNECTOR: { struct drm_connector *connector = obj_to_connector(obj); WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex)); ret = drm_atomic_connector_get_property(connector, connector->state, property, val); break; } case DRM_MODE_OBJECT_CRTC: { struct drm_crtc *crtc = obj_to_crtc(obj); WARN_ON(!drm_modeset_is_locked(&crtc->mutex)); ret = drm_atomic_crtc_get_property(crtc, crtc->state, property, val); break; } case DRM_MODE_OBJECT_PLANE: { struct drm_plane *plane = obj_to_plane(obj); WARN_ON(!drm_modeset_is_locked(&plane->mutex)); ret = drm_atomic_plane_get_property(plane, plane->state, property, val); break; } default: ret = -EINVAL; break; } return ret; } /** * drm_atomic_set_crtc_for_plane - set crtc for plane * @plane_state: the plane whose incoming state to update * @crtc: crtc to use for the plane * * Changing the assigned crtc for a plane requires us to grab the lock and state * for the new crtc, as needed. This function takes care of all these details * besides updating the pointer in the state object itself. * * Returns: * 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK * then the w/w mutex code has detected a deadlock and the entire atomic * sequence must be restarted. All other errors are fatal. */ int drm_atomic_set_crtc_for_plane(struct drm_plane_state *plane_state, struct drm_crtc *crtc) { struct drm_plane *plane = plane_state->plane; struct drm_crtc_state *crtc_state; if (plane_state->crtc) { crtc_state = drm_atomic_get_crtc_state(plane_state->state, plane_state->crtc); if (WARN_ON(IS_ERR(crtc_state))) return PTR_ERR(crtc_state); crtc_state->plane_mask &= ~(1 << drm_plane_index(plane)); } plane_state->crtc = crtc; if (crtc) { crtc_state = drm_atomic_get_crtc_state(plane_state->state, crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); crtc_state->plane_mask |= (1 << drm_plane_index(plane)); } if (crtc) DRM_DEBUG_ATOMIC("Link plane state %p to [CRTC:%d]\n", plane_state, crtc->base.id); else DRM_DEBUG_ATOMIC("Link plane state %p to [NOCRTC]\n", plane_state); return 0; } EXPORT_SYMBOL(drm_atomic_set_crtc_for_plane); /** * drm_atomic_set_fb_for_plane - set framebuffer for plane * @plane_state: atomic state object for the plane * @fb: fb to use for the plane * * Changing the assigned framebuffer for a plane requires us to grab a reference * to the new fb and drop the reference to the old fb, if there is one. This * function takes care of all these details besides updating the pointer in the * state object itself. */ void drm_atomic_set_fb_for_plane(struct drm_plane_state *plane_state, struct drm_framebuffer *fb) { if (plane_state->fb) drm_framebuffer_unreference(plane_state->fb); if (fb) drm_framebuffer_reference(fb); plane_state->fb = fb; if (fb) DRM_DEBUG_ATOMIC("Set [FB:%d] for plane state %p\n", fb->base.id, plane_state); else DRM_DEBUG_ATOMIC("Set [NOFB] for plane state %p\n", plane_state); } EXPORT_SYMBOL(drm_atomic_set_fb_for_plane); /** * drm_atomic_set_crtc_for_connector - set crtc for connector * @conn_state: atomic state object for the connector * @crtc: crtc to use for the connector * * Changing the assigned crtc for a connector requires us to grab the lock and * state for the new crtc, as needed. This function takes care of all these * details besides updating the pointer in the state object itself. * * Returns: * 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK * then the w/w mutex code has detected a deadlock and the entire atomic * sequence must be restarted. All other errors are fatal. */ int drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state, struct drm_crtc *crtc) { struct drm_crtc_state *crtc_state; if (crtc) { crtc_state = drm_atomic_get_crtc_state(conn_state->state, crtc); if (IS_ERR(crtc_state)) return PTR_ERR(crtc_state); } conn_state->crtc = crtc; if (crtc) DRM_DEBUG_ATOMIC("Link connector state %p to [CRTC:%d]\n", conn_state, crtc->base.id); else DRM_DEBUG_ATOMIC("Link connector state %p to [NOCRTC]\n", conn_state); return 0; } EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector); /** * drm_atomic_add_affected_connectors - add connectors for crtc * @state: atomic state * @crtc: DRM crtc * * This function walks the current configuration and adds all connectors * currently using @crtc to the atomic configuration @state. Note that this * function must acquire the connection mutex. This can potentially cause * unneeded seralization if the update is just for the planes on one crtc. Hence * drivers and helpers should only call this when really needed (e.g. when a * full modeset needs to happen due to some change). * * Returns: * 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK * then the w/w mutex code has detected a deadlock and the entire atomic * sequence must be restarted. All other errors are fatal. */ int drm_atomic_add_affected_connectors(struct drm_atomic_state *state, struct drm_crtc *crtc) { struct drm_mode_config *config = &state->dev->mode_config; struct drm_connector *connector; struct drm_connector_state *conn_state; int ret; ret = drm_modeset_lock(&config->connection_mutex, state->acquire_ctx); if (ret) return ret; DRM_DEBUG_ATOMIC("Adding all current connectors for [CRTC:%d] to %p\n", crtc->base.id, state); /* * Changed connectors are already in @state, so only need to look at the * current configuration. */ drm_for_each_connector(connector, state->dev) { if (connector->state->crtc != crtc) continue; conn_state = drm_atomic_get_connector_state(state, connector); if (IS_ERR(conn_state)) return PTR_ERR(conn_state); } return 0; } EXPORT_SYMBOL(drm_atomic_add_affected_connectors); /** * drm_atomic_add_affected_planes - add planes for crtc * @state: atomic state * @crtc: DRM crtc * * This function walks the current configuration and adds all planes * currently used by @crtc to the atomic configuration @state. This is useful * when an atomic commit also needs to check all currently enabled plane on * @crtc, e.g. when changing the mode. It's also useful when re-enabling a CRTC * to avoid special code to force-enable all planes. * * Since acquiring a plane state will always also acquire the w/w mutex of the * current CRTC for that plane (if there is any) adding all the plane states for * a CRTC will not reduce parallism of atomic updates. * * Returns: * 0 on success or can fail with -EDEADLK or -ENOMEM. When the error is EDEADLK * then the w/w mutex code has detected a deadlock and the entire atomic * sequence must be restarted. All other errors are fatal. */ int drm_atomic_add_affected_planes(struct drm_atomic_state *state, struct drm_crtc *crtc) { struct drm_plane *plane; WARN_ON(!drm_atomic_get_existing_crtc_state(state, crtc)); drm_for_each_plane_mask(plane, state->dev, crtc->state->plane_mask) { struct drm_plane_state *plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) return PTR_ERR(plane_state); } return 0; } EXPORT_SYMBOL(drm_atomic_add_affected_planes); /** * drm_atomic_connectors_for_crtc - count number of connected outputs * @state: atomic state * @crtc: DRM crtc * * This function counts all connectors which will be connected to @crtc * according to @state. Useful to recompute the enable state for @crtc. */ int drm_atomic_connectors_for_crtc(struct drm_atomic_state *state, struct drm_crtc *crtc) { struct drm_connector *connector; struct drm_connector_state *conn_state; int i, num_connected_connectors = 0; for_each_connector_in_state(state, connector, conn_state, i) { if (conn_state->crtc == crtc) num_connected_connectors++; } DRM_DEBUG_ATOMIC("State %p has %i connectors for [CRTC:%d]\n", state, num_connected_connectors, crtc->base.id); return num_connected_connectors; } EXPORT_SYMBOL(drm_atomic_connectors_for_crtc); /** * drm_atomic_legacy_backoff - locking backoff for legacy ioctls * @state: atomic state * * This function should be used by legacy entry points which don't understand * -EDEADLK semantics. For simplicity this one will grab all modeset locks after * the slowpath completed. */ void drm_atomic_legacy_backoff(struct drm_atomic_state *state) { int ret; retry: drm_modeset_backoff(state->acquire_ctx); ret = drm_modeset_lock(&state->dev->mode_config.connection_mutex, state->acquire_ctx); if (ret) goto retry; ret = drm_modeset_lock_all_crtcs(state->dev, state->acquire_ctx); if (ret) goto retry; } EXPORT_SYMBOL(drm_atomic_legacy_backoff); /** * drm_atomic_check_only - check whether a given config would work * @state: atomic configuration to check * * Note that this function can return -EDEADLK if the driver needed to acquire * more locks but encountered a deadlock. The caller must then do the usual w/w * backoff dance and restart. All other errors are fatal. * * Returns: * 0 on success, negative error code on failure. */ int drm_atomic_check_only(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_mode_config *config = &dev->mode_config; struct drm_plane *plane; struct drm_plane_state *plane_state; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; int i, ret = 0; DRM_DEBUG_ATOMIC("checking %p\n", state); for_each_plane_in_state(state, plane, plane_state, i) { ret = drm_atomic_plane_check(plane, plane_state); if (ret) { DRM_DEBUG_ATOMIC("[PLANE:%d] atomic core check failed\n", plane->base.id); return ret; } } for_each_crtc_in_state(state, crtc, crtc_state, i) { ret = drm_atomic_crtc_check(crtc, crtc_state); if (ret) { DRM_DEBUG_ATOMIC("[CRTC:%d] atomic core check failed\n", crtc->base.id); return ret; } } if (config->funcs->atomic_check) ret = config->funcs->atomic_check(state->dev, state); if (!state->allow_modeset) { for_each_crtc_in_state(state, crtc, crtc_state, i) { if (drm_atomic_crtc_needs_modeset(crtc_state)) { DRM_DEBUG_ATOMIC("[CRTC:%d] requires full modeset\n", crtc->base.id); return -EINVAL; } } } return ret; } EXPORT_SYMBOL(drm_atomic_check_only); /** * drm_atomic_commit - commit configuration atomically * @state: atomic configuration to check * * Note that this function can return -EDEADLK if the driver needed to acquire * more locks but encountered a deadlock. The caller must then do the usual w/w * backoff dance and restart. All other errors are fatal. * * Also note that on successful execution ownership of @state is transferred * from the caller of this function to the function itself. The caller must not * free or in any other way access @state. If the function fails then the caller * must clean up @state itself. * * Returns: * 0 on success, negative error code on failure. */ int drm_atomic_commit(struct drm_atomic_state *state) { struct drm_mode_config *config = &state->dev->mode_config; int ret; ret = drm_atomic_check_only(state); if (ret) return ret; DRM_DEBUG_ATOMIC("commiting %p\n", state); return config->funcs->atomic_commit(state->dev, state, false); } EXPORT_SYMBOL(drm_atomic_commit); /** * drm_atomic_async_commit - atomic&async configuration commit * @state: atomic configuration to check * * Note that this function can return -EDEADLK if the driver needed to acquire * more locks but encountered a deadlock. The caller must then do the usual w/w * backoff dance and restart. All other errors are fatal. * * Also note that on successful execution ownership of @state is transferred * from the caller of this function to the function itself. The caller must not * free or in any other way access @state. If the function fails then the caller * must clean up @state itself. * * Returns: * 0 on success, negative error code on failure. */ int drm_atomic_async_commit(struct drm_atomic_state *state) { struct drm_mode_config *config = &state->dev->mode_config; int ret; ret = drm_atomic_check_only(state); if (ret) return ret; DRM_DEBUG_ATOMIC("commiting %p asynchronously\n", state); return config->funcs->atomic_commit(state->dev, state, true); } EXPORT_SYMBOL(drm_atomic_async_commit); /* * The big monstor ioctl */ static struct drm_pending_vblank_event *create_vblank_event( struct drm_device *dev, struct drm_file *file_priv, uint64_t user_data) { struct drm_pending_vblank_event *e = NULL; unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); if (file_priv->event_space < sizeof e->event) { spin_unlock_irqrestore(&dev->event_lock, flags); goto out; } file_priv->event_space -= sizeof e->event; spin_unlock_irqrestore(&dev->event_lock, flags); e = kzalloc(sizeof *e, GFP_KERNEL); if (e == NULL) { spin_lock_irqsave(&dev->event_lock, flags); file_priv->event_space += sizeof e->event; spin_unlock_irqrestore(&dev->event_lock, flags); goto out; } e->event.base.type = DRM_EVENT_FLIP_COMPLETE; e->event.base.length = sizeof e->event; e->event.user_data = user_data; e->base.event = &e->event.base; e->base.file_priv = file_priv; e->base.destroy = (void (*) (struct drm_pending_event *)) kfree; out: return e; } static void destroy_vblank_event(struct drm_device *dev, struct drm_file *file_priv, struct drm_pending_vblank_event *e) { unsigned long flags; spin_lock_irqsave(&dev->event_lock, flags); file_priv->event_space += sizeof e->event; spin_unlock_irqrestore(&dev->event_lock, flags); kfree(e); } static int atomic_set_prop(struct drm_atomic_state *state, struct drm_mode_object *obj, struct drm_property *prop, uint64_t prop_value) { struct drm_mode_object *ref; int ret; if (!drm_property_change_valid_get(prop, prop_value, &ref)) return -EINVAL; switch (obj->type) { case DRM_MODE_OBJECT_CONNECTOR: { struct drm_connector *connector = obj_to_connector(obj); struct drm_connector_state *connector_state; connector_state = drm_atomic_get_connector_state(state, connector); if (IS_ERR(connector_state)) { ret = PTR_ERR(connector_state); break; } ret = drm_atomic_connector_set_property(connector, connector_state, prop, prop_value); break; } case DRM_MODE_OBJECT_CRTC: { struct drm_crtc *crtc = obj_to_crtc(obj); struct drm_crtc_state *crtc_state; crtc_state = drm_atomic_get_crtc_state(state, crtc); if (IS_ERR(crtc_state)) { ret = PTR_ERR(crtc_state); break; } ret = drm_atomic_crtc_set_property(crtc, crtc_state, prop, prop_value); break; } case DRM_MODE_OBJECT_PLANE: { struct drm_plane *plane = obj_to_plane(obj); struct drm_plane_state *plane_state; plane_state = drm_atomic_get_plane_state(state, plane); if (IS_ERR(plane_state)) { ret = PTR_ERR(plane_state); break; } ret = drm_atomic_plane_set_property(plane, plane_state, prop, prop_value); break; } default: ret = -EINVAL; break; } drm_property_change_valid_put(prop, ref); return ret; } int drm_mode_atomic_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_mode_atomic *arg = data; uint32_t __user *objs_ptr = (uint32_t __user *)(unsigned long)(arg->objs_ptr); uint32_t __user *count_props_ptr = (uint32_t __user *)(unsigned long)(arg->count_props_ptr); uint32_t __user *props_ptr = (uint32_t __user *)(unsigned long)(arg->props_ptr); uint64_t __user *prop_values_ptr = (uint64_t __user *)(unsigned long)(arg->prop_values_ptr); unsigned int copied_objs, copied_props; struct drm_atomic_state *state; struct drm_modeset_acquire_ctx ctx; struct drm_plane *plane; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; unsigned plane_mask; int ret = 0; unsigned int i, j; /* disallow for drivers not supporting atomic: */ if (!drm_core_check_feature(dev, DRIVER_ATOMIC)) return -EINVAL; /* disallow for userspace that has not enabled atomic cap (even * though this may be a bit overkill, since legacy userspace * wouldn't know how to call this ioctl) */ if (!file_priv->atomic) return -EINVAL; if (arg->flags & ~DRM_MODE_ATOMIC_FLAGS) return -EINVAL; if (arg->reserved) return -EINVAL; if ((arg->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip) return -EINVAL; /* can't test and expect an event at the same time. */ if ((arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) && (arg->flags & DRM_MODE_PAGE_FLIP_EVENT)) return -EINVAL; drm_modeset_acquire_init(&ctx, 0); state = drm_atomic_state_alloc(dev); if (!state) return -ENOMEM; state->acquire_ctx = &ctx; state->allow_modeset = !!(arg->flags & DRM_MODE_ATOMIC_ALLOW_MODESET); retry: plane_mask = 0; copied_objs = 0; copied_props = 0; for (i = 0; i < arg->count_objs; i++) { uint32_t obj_id, count_props; struct drm_mode_object *obj; if (get_user(obj_id, objs_ptr + copied_objs)) { ret = -EFAULT; goto out; } obj = drm_mode_object_find(dev, obj_id, DRM_MODE_OBJECT_ANY); if (!obj || !obj->properties) { ret = -ENOENT; goto out; } if (get_user(count_props, count_props_ptr + copied_objs)) { ret = -EFAULT; goto out; } copied_objs++; for (j = 0; j < count_props; j++) { uint32_t prop_id; uint64_t prop_value; struct drm_property *prop; if (get_user(prop_id, props_ptr + copied_props)) { ret = -EFAULT; goto out; } prop = drm_property_find(dev, prop_id); if (!prop) { ret = -ENOENT; goto out; } if (copy_from_user(&prop_value, prop_values_ptr + copied_props, sizeof(prop_value))) { ret = -EFAULT; goto out; } ret = atomic_set_prop(state, obj, prop, prop_value); if (ret) goto out; copied_props++; } if (obj->type == DRM_MODE_OBJECT_PLANE && count_props && !(arg->flags & DRM_MODE_ATOMIC_TEST_ONLY)) { plane = obj_to_plane(obj); plane_mask |= (1 << drm_plane_index(plane)); plane->old_fb = plane->fb; } } if (arg->flags & DRM_MODE_PAGE_FLIP_EVENT) { for_each_crtc_in_state(state, crtc, crtc_state, i) { struct drm_pending_vblank_event *e; e = create_vblank_event(dev, file_priv, arg->user_data); if (!e) { ret = -ENOMEM; goto out; } crtc_state->event = e; } } if (arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) { /* * Unlike commit, check_only does not clean up state. * Below we call drm_atomic_state_free for it. */ ret = drm_atomic_check_only(state); } else if (arg->flags & DRM_MODE_ATOMIC_NONBLOCK) { ret = drm_atomic_async_commit(state); } else { ret = drm_atomic_commit(state); } out: /* if succeeded, fixup legacy plane crtc/fb ptrs before dropping * locks (ie. while it is still safe to deref plane->state). We * need to do this here because the driver entry points cannot * distinguish between legacy and atomic ioctls. */ drm_for_each_plane_mask(plane, dev, plane_mask) { if (ret == 0) { struct drm_framebuffer *new_fb = plane->state->fb; if (new_fb) drm_framebuffer_reference(new_fb); plane->fb = new_fb; plane->crtc = plane->state->crtc; if (plane->old_fb) drm_framebuffer_unreference(plane->old_fb); } plane->old_fb = NULL; } if (ret && arg->flags & DRM_MODE_PAGE_FLIP_EVENT) { /* * TEST_ONLY and PAGE_FLIP_EVENT are mutually exclusive, * if they weren't, this code should be called on success * for TEST_ONLY too. */ for_each_crtc_in_state(state, crtc, crtc_state, i) { if (!crtc_state->event) continue; destroy_vblank_event(dev, file_priv, crtc_state->event); } } if (ret == -EDEADLK) { drm_atomic_state_clear(state); drm_modeset_backoff(&ctx); goto retry; } if (ret || arg->flags & DRM_MODE_ATOMIC_TEST_ONLY) drm_atomic_state_free(state); drm_modeset_drop_locks(&ctx); drm_modeset_acquire_fini(&ctx); return ret; }