#ifndef _LINUX_KERNEL_H #define _LINUX_KERNEL_H /* * 'kernel.h' contains some often-used function prototypes etc */ #define __ALIGN_KERNEL(x, a) __ALIGN_KERNEL_MASK(x, (typeof(x))(a) - 1) #define __ALIGN_KERNEL_MASK(x, mask) (((x) + (mask)) & ~(mask)) #ifdef __KERNEL__ #include #include #include #include #include #include #include #include #include #include #include extern const char linux_banner[]; extern const char linux_proc_banner[]; #define USHRT_MAX ((u16)(~0U)) #define SHRT_MAX ((s16)(USHRT_MAX>>1)) #define SHRT_MIN ((s16)(-SHRT_MAX - 1)) #define INT_MAX ((int)(~0U>>1)) #define INT_MIN (-INT_MAX - 1) #define UINT_MAX (~0U) #define LONG_MAX ((long)(~0UL>>1)) #define LONG_MIN (-LONG_MAX - 1) #define ULONG_MAX (~0UL) #define LLONG_MAX ((long long)(~0ULL>>1)) #define LLONG_MIN (-LLONG_MAX - 1) #define ULLONG_MAX (~0ULL) #define STACK_MAGIC 0xdeadbeef #define ALIGN(x, a) __ALIGN_KERNEL((x), (a)) #define __ALIGN_MASK(x, mask) __ALIGN_KERNEL_MASK((x), (mask)) #define PTR_ALIGN(p, a) ((typeof(p))ALIGN((unsigned long)(p), (a))) #define IS_ALIGNED(x, a) (((x) & ((typeof(x))(a) - 1)) == 0) #define ARRAY_SIZE(arr) (sizeof(arr) / sizeof((arr)[0]) + __must_be_array(arr)) /* * This looks more complex than it should be. But we need to * get the type for the ~ right in round_down (it needs to be * as wide as the result!), and we want to evaluate the macro * arguments just once each. */ #define __round_mask(x, y) ((__typeof__(x))((y)-1)) #define round_up(x, y) ((((x)-1) | __round_mask(x, y))+1) #define round_down(x, y) ((x) & ~__round_mask(x, y)) #define FIELD_SIZEOF(t, f) (sizeof(((t*)0)->f)) #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) #define DIV_ROUND_CLOSEST(x, divisor)( \ { \ typeof(divisor) __divisor = divisor; \ (((x) + ((__divisor) / 2)) / (__divisor)); \ } \ ) #define _RET_IP_ (unsigned long)__builtin_return_address(0) #define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) #ifdef CONFIG_LBDAF # include # define sector_div(a, b) do_div(a, b) #else # define sector_div(n, b)( \ { \ int _res; \ _res = (n) % (b); \ (n) /= (b); \ _res; \ } \ ) #endif /** * upper_32_bits - return bits 32-63 of a number * @n: the number we're accessing * * A basic shift-right of a 64- or 32-bit quantity. Use this to suppress * the "right shift count >= width of type" warning when that quantity is * 32-bits. */ #define upper_32_bits(n) ((u32)(((n) >> 16) >> 16)) /** * lower_32_bits - return bits 0-31 of a number * @n: the number we're accessing */ #define lower_32_bits(n) ((u32)(n)) #define KERN_EMERG "<0>" /* system is unusable */ #define KERN_ALERT "<1>" /* action must be taken immediately */ #define KERN_CRIT "<2>" /* critical conditions */ #define KERN_ERR "<3>" /* error conditions */ #define KERN_WARNING "<4>" /* warning conditions */ #define KERN_NOTICE "<5>" /* normal but significant condition */ #define KERN_INFO "<6>" /* informational */ #define KERN_DEBUG "<7>" /* debug-level messages */ /* Use the default kernel loglevel */ #define KERN_DEFAULT "" /* * Annotation for a "continued" line of log printout (only done after a * line that had no enclosing \n). Only to be used by core/arch code * during early bootup (a continued line is not SMP-safe otherwise). */ #define KERN_CONT "" extern int console_printk[]; #define console_loglevel (console_printk[0]) #define default_message_loglevel (console_printk[1]) #define minimum_console_loglevel (console_printk[2]) #define default_console_loglevel (console_printk[3]) struct completion; struct pt_regs; struct user; #ifdef CONFIG_PREEMPT_VOLUNTARY extern int _cond_resched(void); # define might_resched() _cond_resched() #else # define might_resched() do { } while (0) #endif #ifdef CONFIG_DEBUG_SPINLOCK_SLEEP void __might_sleep(const char *file, int line, int preempt_offset); /** * might_sleep - annotation for functions that can sleep * * this macro will print a stack trace if it is executed in an atomic * context (spinlock, irq-handler, ...). * * This is a useful debugging help to be able to catch problems early and not * be bitten later when the calling function happens to sleep when it is not * supposed to. */ # define might_sleep() \ do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0) #else static inline void __might_sleep(const char *file, int line, int preempt_offset) { } # define might_sleep() do { might_resched(); } while (0) #endif #define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0) #define abs(x) ({ \ long __x = (x); \ (__x < 0) ? -__x : __x; \ }) #ifdef CONFIG_PROVE_LOCKING void might_fault(void); #else static inline void might_fault(void) { might_sleep(); } #endif extern struct atomic_notifier_head panic_notifier_list; extern long (*panic_blink)(long time); NORET_TYPE void panic(const char * fmt, ...) __attribute__ ((NORET_AND format (printf, 1, 2))) __cold; extern void oops_enter(void); extern void oops_exit(void); extern int oops_may_print(void); NORET_TYPE void do_exit(long error_code) ATTRIB_NORET; NORET_TYPE void complete_and_exit(struct completion *, long) ATTRIB_NORET; extern unsigned long simple_strtoul(const char *,char **,unsigned int); extern long simple_strtol(const char *,char **,unsigned int); extern unsigned long long simple_strtoull(const char *,char **,unsigned int); extern long long simple_strtoll(const char *,char **,unsigned int); extern int strict_strtoul(const char *, unsigned int, unsigned long *); extern int strict_strtol(const char *, unsigned int, long *); extern int strict_strtoull(const char *, unsigned int, unsigned long long *); extern int strict_strtoll(const char *, unsigned int, long long *); extern int sprintf(char * buf, const char * fmt, ...) __attribute__ ((format (printf, 2, 3))); extern int vsprintf(char *buf, const char *, va_list) __attribute__ ((format (printf, 2, 0))); extern int snprintf(char * buf, size_t size, const char * fmt, ...) __attribute__ ((format (printf, 3, 4))); extern int vsnprintf(char *buf, size_t size, const char *fmt, va_list args) __attribute__ ((format (printf, 3, 0))); extern int scnprintf(char * buf, size_t size, const char * fmt, ...) __attribute__ ((format (printf, 3, 4))); extern int vscnprintf(char *buf, size_t size, const char *fmt, va_list args) __attribute__ ((format (printf, 3, 0))); extern char *kasprintf(gfp_t gfp, const char *fmt, ...) __attribute__ ((format (printf, 2, 3))); extern char *kvasprintf(gfp_t gfp, const char *fmt, va_list args); extern int sscanf(const char *, const char *, ...) __attribute__ ((format (scanf, 2, 3))); extern int vsscanf(const char *, const char *, va_list) __attribute__ ((format (scanf, 2, 0))); extern int get_option(char **str, int *pint); extern char *get_options(const char *str, int nints, int *ints); extern unsigned long long memparse(const char *ptr, char **retptr); extern int core_kernel_text(unsigned long addr); extern int __kernel_text_address(unsigned long addr); extern int kernel_text_address(unsigned long addr); extern int func_ptr_is_kernel_text(void *ptr); struct pid; extern struct pid *session_of_pgrp(struct pid *pgrp); /* * FW_BUG * Add this to a message where you are sure the firmware is buggy or behaves * really stupid or out of spec. Be aware that the responsible BIOS developer * should be able to fix this issue or at least get a concrete idea of the * problem by reading your message without the need of looking at the kernel * code. * * Use it for definite and high priority BIOS bugs. * * FW_WARN * Use it for not that clear (e.g. could the kernel messed up things already?) * and medium priority BIOS bugs. * * FW_INFO * Use this one if you want to tell the user or vendor about something * suspicious, but generally harmless related to the firmware. * * Use it for information or very low priority BIOS bugs. */ #define FW_BUG "[Firmware Bug]: " #define FW_WARN "[Firmware Warn]: " #define FW_INFO "[Firmware Info]: " #ifdef CONFIG_PRINTK asmlinkage int vprintk(const char *fmt, va_list args) __attribute__ ((format (printf, 1, 0))); asmlinkage int printk(const char * fmt, ...) __attribute__ ((format (printf, 1, 2))) __cold; extern int __printk_ratelimit(const char *func); #define printk_ratelimit() __printk_ratelimit(__func__) extern bool printk_timed_ratelimit(unsigned long *caller_jiffies, unsigned int interval_msec); extern int printk_delay_msec; /* * Print a one-time message (analogous to WARN_ONCE() et al): */ #define printk_once(x...) ({ \ static bool __print_once; \ \ if (!__print_once) { \ __print_once = true; \ printk(x); \ } \ }) void log_buf_kexec_setup(void); #else static inline int vprintk(const char *s, va_list args) __attribute__ ((format (printf, 1, 0))); static inline int vprintk(const char *s, va_list args) { return 0; } static inline int printk(const char *s, ...) __attribute__ ((format (printf, 1, 2))); static inline int __cold printk(const char *s, ...) { return 0; } static inline int printk_ratelimit(void) { return 0; } static inline bool printk_timed_ratelimit(unsigned long *caller_jiffies, \ unsigned int interval_msec) \ { return false; } /* No effect, but we still get type checking even in the !PRINTK case: */ #define printk_once(x...) printk(x) static inline void log_buf_kexec_setup(void) { } #endif extern int printk_needs_cpu(int cpu); extern void printk_tick(void); extern void asmlinkage __attribute__((format(printf, 1, 2))) early_printk(const char *fmt, ...); unsigned long int_sqrt(unsigned long); static inline void console_silent(void) { console_loglevel = 0; } static inline void console_verbose(void) { if (console_loglevel) console_loglevel = 15; } extern void bust_spinlocks(int yes); extern void wake_up_klogd(void); extern int oops_in_progress; /* If set, an oops, panic(), BUG() or die() is in progress */ extern int panic_timeout; extern int panic_on_oops; extern int panic_on_unrecovered_nmi; extern int panic_on_io_nmi; extern const char *print_tainted(void); extern void add_taint(unsigned flag); extern int test_taint(unsigned flag); extern unsigned long get_taint(void); extern int root_mountflags; /* Values used for system_state */ extern enum system_states { SYSTEM_BOOTING, SYSTEM_RUNNING, SYSTEM_HALT, SYSTEM_POWER_OFF, SYSTEM_RESTART, SYSTEM_SUSPEND_DISK, } system_state; #define TAINT_PROPRIETARY_MODULE 0 #define TAINT_FORCED_MODULE 1 #define TAINT_UNSAFE_SMP 2 #define TAINT_FORCED_RMMOD 3 #define TAINT_MACHINE_CHECK 4 #define TAINT_BAD_PAGE 5 #define TAINT_USER 6 #define TAINT_DIE 7 #define TAINT_OVERRIDDEN_ACPI_TABLE 8 #define TAINT_WARN 9 #define TAINT_CRAP 10 #define TAINT_FIRMWARE_WORKAROUND 11 extern void dump_stack(void) __cold; enum { DUMP_PREFIX_NONE, DUMP_PREFIX_ADDRESS, DUMP_PREFIX_OFFSET }; extern void hex_dump_to_buffer(const void *buf, size_t len, int rowsize, int groupsize, char *linebuf, size_t linebuflen, bool ascii); extern void print_hex_dump(const char *level, const char *prefix_str, int prefix_type, int rowsize, int groupsize, const void *buf, size_t len, bool ascii); extern void print_hex_dump_bytes(const char *prefix_str, int prefix_type, const void *buf, size_t len); extern const char hex_asc[]; #define hex_asc_lo(x) hex_asc[((x) & 0x0f)] #define hex_asc_hi(x) hex_asc[((x) & 0xf0) >> 4] static inline char *pack_hex_byte(char *buf, u8 byte) { *buf++ = hex_asc_hi(byte); *buf++ = hex_asc_lo(byte); return buf; } extern int hex_to_bin(char ch); #ifndef pr_fmt #define pr_fmt(fmt) fmt #endif #define pr_emerg(fmt, ...) \ printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) #define pr_alert(fmt, ...) \ printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) #define pr_crit(fmt, ...) \ printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) #define pr_err(fmt, ...) \ printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) #define pr_warning(fmt, ...) \ printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) #define pr_warn pr_warning #define pr_notice(fmt, ...) \ printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) #define pr_info(fmt, ...) \ printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) /* pr_devel() should produce zero code unless DEBUG is defined */ #ifdef DEBUG #define pr_devel(fmt, ...) \ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else #define pr_devel(fmt, ...) \ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) #endif /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #elif defined(CONFIG_DYNAMIC_DEBUG) /* dynamic_pr_debug() uses pr_fmt() internally so we don't need it here */ #define pr_debug(fmt, ...) \ dynamic_pr_debug(fmt, ##__VA_ARGS__) #else #define pr_debug(fmt, ...) \ ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) #endif /* * ratelimited messages with local ratelimit_state, * no local ratelimit_state used in the !PRINTK case */ #ifdef CONFIG_PRINTK #define printk_ratelimited(fmt, ...) ({ \ static DEFINE_RATELIMIT_STATE(_rs, \ DEFAULT_RATELIMIT_INTERVAL, \ DEFAULT_RATELIMIT_BURST); \ \ if (__ratelimit(&_rs)) \ printk(fmt, ##__VA_ARGS__); \ }) #else /* No effect, but we still get type checking even in the !PRINTK case: */ #define printk_ratelimited printk #endif #define pr_emerg_ratelimited(fmt, ...) \ printk_ratelimited(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) #define pr_alert_ratelimited(fmt, ...) \ printk_ratelimited(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__) #define pr_crit_ratelimited(fmt, ...) \ printk_ratelimited(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__) #define pr_err_ratelimited(fmt, ...) \ printk_ratelimited(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__) #define pr_warning_ratelimited(fmt, ...) \ printk_ratelimited(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__) #define pr_warn_ratelimited pr_warning_ratelimited #define pr_notice_ratelimited(fmt, ...) \ printk_ratelimited(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__) #define pr_info_ratelimited(fmt, ...) \ printk_ratelimited(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__) /* no pr_cont_ratelimited, don't do that... */ /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug_ratelimited(fmt, ...) \ printk_ratelimited(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) #else #define pr_debug_ratelimited(fmt, ...) \ ({ if (0) printk_ratelimited(KERN_DEBUG pr_fmt(fmt), \ ##__VA_ARGS__); 0; }) #endif /* * General tracing related utility functions - trace_printk(), * tracing_on/tracing_off and tracing_start()/tracing_stop * * Use tracing_on/tracing_off when you want to quickly turn on or off * tracing. It simply enables or disables the recording of the trace events. * This also corresponds to the user space /sys/kernel/debug/tracing/tracing_on * file, which gives a means for the kernel and userspace to interact. * Place a tracing_off() in the kernel where you want tracing to end. * From user space, examine the trace, and then echo 1 > tracing_on * to continue tracing. * * tracing_stop/tracing_start has slightly more overhead. It is used * by things like suspend to ram where disabling the recording of the * trace is not enough, but tracing must actually stop because things * like calling smp_processor_id() may crash the system. * * Most likely, you want to use tracing_on/tracing_off. */ #ifdef CONFIG_RING_BUFFER void tracing_on(void); void tracing_off(void); /* trace_off_permanent stops recording with no way to bring it back */ void tracing_off_permanent(void); int tracing_is_on(void); #else static inline void tracing_on(void) { } static inline void tracing_off(void) { } static inline void tracing_off_permanent(void) { } static inline int tracing_is_on(void) { return 0; } #endif enum ftrace_dump_mode { DUMP_NONE, DUMP_ALL, DUMP_ORIG, }; #ifdef CONFIG_TRACING extern void tracing_start(void); extern void tracing_stop(void); extern void ftrace_off_permanent(void); static inline void __attribute__ ((format (printf, 1, 2))) ____trace_printk_check_format(const char *fmt, ...) { } #define __trace_printk_check_format(fmt, args...) \ do { \ if (0) \ ____trace_printk_check_format(fmt, ##args); \ } while (0) /** * trace_printk - printf formatting in the ftrace buffer * @fmt: the printf format for printing * * Note: __trace_printk is an internal function for trace_printk and * the @ip is passed in via the trace_printk macro. * * This function allows a kernel developer to debug fast path sections * that printk is not appropriate for. By scattering in various * printk like tracing in the code, a developer can quickly see * where problems are occurring. * * This is intended as a debugging tool for the developer only. * Please refrain from leaving trace_printks scattered around in * your code. */ #define trace_printk(fmt, args...) \ do { \ __trace_printk_check_format(fmt, ##args); \ if (__builtin_constant_p(fmt)) { \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ __builtin_constant_p(fmt) ? fmt : NULL; \ \ __trace_bprintk(_THIS_IP_, trace_printk_fmt, ##args); \ } else \ __trace_printk(_THIS_IP_, fmt, ##args); \ } while (0) extern int __trace_bprintk(unsigned long ip, const char *fmt, ...) __attribute__ ((format (printf, 2, 3))); extern int __trace_printk(unsigned long ip, const char *fmt, ...) __attribute__ ((format (printf, 2, 3))); extern void trace_dump_stack(void); /* * The double __builtin_constant_p is because gcc will give us an error * if we try to allocate the static variable to fmt if it is not a * constant. Even with the outer if statement. */ #define ftrace_vprintk(fmt, vargs) \ do { \ if (__builtin_constant_p(fmt)) { \ static const char *trace_printk_fmt \ __attribute__((section("__trace_printk_fmt"))) = \ __builtin_constant_p(fmt) ? fmt : NULL; \ \ __ftrace_vbprintk(_THIS_IP_, trace_printk_fmt, vargs); \ } else \ __ftrace_vprintk(_THIS_IP_, fmt, vargs); \ } while (0) extern int __ftrace_vbprintk(unsigned long ip, const char *fmt, va_list ap); extern int __ftrace_vprintk(unsigned long ip, const char *fmt, va_list ap); extern void ftrace_dump(enum ftrace_dump_mode oops_dump_mode); #else static inline int trace_printk(const char *fmt, ...) __attribute__ ((format (printf, 1, 2))); static inline void tracing_start(void) { } static inline void tracing_stop(void) { } static inline void ftrace_off_permanent(void) { } static inline void trace_dump_stack(void) { } static inline int trace_printk(const char *fmt, ...) { return 0; } static inline int ftrace_vprintk(const char *fmt, va_list ap) { return 0; } static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } #endif /* CONFIG_TRACING */ /* * Display an IP address in readable format. */ #define NIPQUAD(addr) \ ((unsigned char *)&addr)[0], \ ((unsigned char *)&addr)[1], \ ((unsigned char *)&addr)[2], \ ((unsigned char *)&addr)[3] #define NIPQUAD_FMT "%u.%u.%u.%u" /* * min()/max()/clamp() macros that also do * strict type-checking.. See the * "unnecessary" pointer comparison. */ #define min(x, y) ({ \ typeof(x) _min1 = (x); \ typeof(y) _min2 = (y); \ (void) (&_min1 == &_min2); \ _min1 < _min2 ? _min1 : _min2; }) #define max(x, y) ({ \ typeof(x) _max1 = (x); \ typeof(y) _max2 = (y); \ (void) (&_max1 == &_max2); \ _max1 > _max2 ? _max1 : _max2; }) /** * clamp - return a value clamped to a given range with strict typechecking * @val: current value * @min: minimum allowable value * @max: maximum allowable value * * This macro does strict typechecking of min/max to make sure they are of the * same type as val. See the unnecessary pointer comparisons. */ #define clamp(val, min, max) ({ \ typeof(val) __val = (val); \ typeof(min) __min = (min); \ typeof(max) __max = (max); \ (void) (&__val == &__min); \ (void) (&__val == &__max); \ __val = __val < __min ? __min: __val; \ __val > __max ? __max: __val; }) /* * ..and if you can't take the strict * types, you can specify one yourself. * * Or not use min/max/clamp at all, of course. */ #define min_t(type, x, y) ({ \ type __min1 = (x); \ type __min2 = (y); \ __min1 < __min2 ? __min1: __min2; }) #define max_t(type, x, y) ({ \ type __max1 = (x); \ type __max2 = (y); \ __max1 > __max2 ? __max1: __max2; }) /** * clamp_t - return a value clamped to a given range using a given type * @type: the type of variable to use * @val: current value * @min: minimum allowable value * @max: maximum allowable value * * This macro does no typechecking and uses temporary variables of type * 'type' to make all the comparisons. */ #define clamp_t(type, val, min, max) ({ \ type __val = (val); \ type __min = (min); \ type __max = (max); \ __val = __val < __min ? __min: __val; \ __val > __max ? __max: __val; }) /** * clamp_val - return a value clamped to a given range using val's type * @val: current value * @min: minimum allowable value * @max: maximum allowable value * * This macro does no typechecking and uses temporary variables of whatever * type the input argument 'val' is. This is useful when val is an unsigned * type and min and max are literals that will otherwise be assigned a signed * integer type. */ #define clamp_val(val, min, max) ({ \ typeof(val) __val = (val); \ typeof(val) __min = (min); \ typeof(val) __max = (max); \ __val = __val < __min ? __min: __val; \ __val > __max ? __max: __val; }) /* * swap - swap value of @a and @b */ #define swap(a, b) \ do { typeof(a) __tmp = (a); (a) = (b); (b) = __tmp; } while (0) /** * container_of - cast a member of a structure out to the containing structure * @ptr: the pointer to the member. * @type: the type of the container struct this is embedded in. * @member: the name of the member within the struct. * */ #define container_of(ptr, type, member) ({ \ const typeof( ((type *)0)->member ) *__mptr = (ptr); \ (type *)( (char *)__mptr - offsetof(type,member) );}) struct sysinfo; extern int do_sysinfo(struct sysinfo *info); #endif /* __KERNEL__ */ #ifndef __EXPORTED_HEADERS__ #ifndef __KERNEL__ #warning Attempt to use kernel headers from user space, see http://kernelnewbies.org/KernelHeaders #endif /* __KERNEL__ */ #endif /* __EXPORTED_HEADERS__ */ #define SI_LOAD_SHIFT 16 struct sysinfo { long uptime; /* Seconds since boot */ unsigned long loads[3]; /* 1, 5, and 15 minute load averages */ unsigned long totalram; /* Total usable main memory size */ unsigned long freeram; /* Available memory size */ unsigned long sharedram; /* Amount of shared memory */ unsigned long bufferram; /* Memory used by buffers */ unsigned long totalswap; /* Total swap space size */ unsigned long freeswap; /* swap space still available */ unsigned short procs; /* Number of current processes */ unsigned short pad; /* explicit padding for m68k */ unsigned long totalhigh; /* Total high memory size */ unsigned long freehigh; /* Available high memory size */ unsigned int mem_unit; /* Memory unit size in bytes */ char _f[20-2*sizeof(long)-sizeof(int)]; /* Padding: libc5 uses this.. */ }; /* Force a compilation error if condition is true */ #define BUILD_BUG_ON(condition) ((void)BUILD_BUG_ON_ZERO(condition)) /* Force a compilation error if condition is constant and true */ #define MAYBE_BUILD_BUG_ON(cond) ((void)sizeof(char[1 - 2 * !!(cond)])) /* Force a compilation error if a constant expression is not a power of 2 */ #define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) /* Force a compilation error if condition is true, but also produce a result (of value 0 and type size_t), so the expression can be used e.g. in a structure initializer (or where-ever else comma expressions aren't permitted). */ #define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) #define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) /* Trap pasters of __FUNCTION__ at compile-time */ #define __FUNCTION__ (__func__) /* This helps us to avoid #ifdef CONFIG_NUMA */ #ifdef CONFIG_NUMA #define NUMA_BUILD 1 #else #define NUMA_BUILD 0 #endif /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ #ifdef CONFIG_FTRACE_MCOUNT_RECORD # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD #endif #endif