/* * linux/arch/arm/mach-pxa/balloon3.c * * Support for Balloonboard.org Balloon3 board. * * Author: Nick Bane, Wookey, Jonathan McDowell * Created: June, 2006 * Copyright: Toby Churchill Ltd * Derived from mainstone.c, by Nico Pitre * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "generic.h" #include "devices.h" /****************************************************************************** * Pin configuration ******************************************************************************/ static unsigned long balloon3_pin_config[] __initdata = { /* Select BTUART 'COM1/ttyS0' as IO option for pins 42/43/44/45 */ GPIO42_BTUART_RXD, GPIO43_BTUART_TXD, GPIO44_BTUART_CTS, GPIO45_BTUART_RTS, /* Reset, configured as GPIO wakeup source */ GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH, }; /****************************************************************************** * Compatibility: Parameter parsing ******************************************************************************/ static unsigned long balloon3_irq_enabled; static unsigned long balloon3_features_present = (1 << BALLOON3_FEATURE_OHCI) | (1 << BALLOON3_FEATURE_CF) | (1 << BALLOON3_FEATURE_AUDIO) | (1 << BALLOON3_FEATURE_TOPPOLY); int balloon3_has(enum balloon3_features feature) { return (balloon3_features_present & (1 << feature)) ? 1 : 0; } EXPORT_SYMBOL_GPL(balloon3_has); int __init parse_balloon3_features(char *arg) { if (!arg) return 0; return strict_strtoul(arg, 0, &balloon3_features_present); } early_param("balloon3_features", parse_balloon3_features); /****************************************************************************** * Compact Flash slot ******************************************************************************/ #if defined(CONFIG_PCMCIA_PXA2XX) || defined(CONFIG_PCMCIA_PXA2XX_MODULE) static unsigned long balloon3_cf_pin_config[] __initdata = { GPIO48_nPOE, GPIO49_nPWE, GPIO50_nPIOR, GPIO51_nPIOW, GPIO85_nPCE_1, GPIO54_nPCE_2, GPIO79_PSKTSEL, GPIO55_nPREG, GPIO56_nPWAIT, GPIO57_nIOIS16, }; static void __init balloon3_cf_init(void) { if (!balloon3_has(BALLOON3_FEATURE_CF)) return; pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_cf_pin_config)); } #else static inline void balloon3_cf_init(void) {} #endif /****************************************************************************** * NOR Flash ******************************************************************************/ #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition balloon3_nor_partitions[] = { { .name = "Flash", .offset = 0x00000000, .size = MTDPART_SIZ_FULL, } }; static struct physmap_flash_data balloon3_flash_data[] = { { .width = 2, /* bankwidth in bytes */ .parts = balloon3_nor_partitions, .nr_parts = ARRAY_SIZE(balloon3_nor_partitions) } }; static struct resource balloon3_flash_resource = { .start = PXA_CS0_PHYS, .end = PXA_CS0_PHYS + SZ_64M - 1, .flags = IORESOURCE_MEM, }; static struct platform_device balloon3_flash = { .name = "physmap-flash", .id = 0, .resource = &balloon3_flash_resource, .num_resources = 1, .dev = { .platform_data = balloon3_flash_data, }, }; static void __init balloon3_nor_init(void) { platform_device_register(&balloon3_flash); } #else static inline void balloon3_nor_init(void) {} #endif /****************************************************************************** * Audio and Touchscreen ******************************************************************************/ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || \ defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static unsigned long balloon3_ac97_pin_config[] __initdata = { GPIO28_AC97_BITCLK, GPIO29_AC97_SDATA_IN_0, GPIO30_AC97_SDATA_OUT, GPIO31_AC97_SYNC, GPIO113_AC97_nRESET, GPIO95_GPIO, }; static struct ucb1400_pdata vpac270_ucb1400_pdata = { .irq = IRQ_GPIO(BALLOON3_GPIO_CODEC_IRQ), }; static struct platform_device balloon3_ucb1400_device = { .name = "ucb1400_core", .id = -1, .dev = { .platform_data = &vpac270_ucb1400_pdata, }, }; static void __init balloon3_ts_init(void) { if (!balloon3_has(BALLOON3_FEATURE_AUDIO)) return; pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_ac97_pin_config)); pxa_set_ac97_info(NULL); platform_device_register(&balloon3_ucb1400_device); } #else static inline void balloon3_ts_init(void) {} #endif /****************************************************************************** * Framebuffer ******************************************************************************/ #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE) static unsigned long balloon3_lcd_pin_config[] __initdata = { GPIOxx_LCD_TFT_16BPP, GPIO99_GPIO, }; static struct pxafb_mode_info balloon3_lcd_modes[] = { { .pixclock = 38000, .xres = 480, .yres = 640, .bpp = 16, .hsync_len = 8, .left_margin = 8, .right_margin = 8, .vsync_len = 2, .upper_margin = 4, .lower_margin = 5, .sync = 0, }, }; static struct pxafb_mach_info balloon3_lcd_screen = { .modes = balloon3_lcd_modes, .num_modes = ARRAY_SIZE(balloon3_lcd_modes), .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, }; static void balloon3_backlight_power(int on) { gpio_set_value(BALLOON3_GPIO_RUN_BACKLIGHT, on); } static void __init balloon3_lcd_init(void) { int ret; if (!balloon3_has(BALLOON3_FEATURE_TOPPOLY)) return; pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_lcd_pin_config)); ret = gpio_request(BALLOON3_GPIO_RUN_BACKLIGHT, "BKL-ON"); if (ret) { pr_err("Requesting BKL-ON GPIO failed!\n"); goto err; } ret = gpio_direction_output(BALLOON3_GPIO_RUN_BACKLIGHT, 1); if (ret) { pr_err("Setting BKL-ON GPIO direction failed!\n"); goto err2; } balloon3_lcd_screen.pxafb_backlight_power = balloon3_backlight_power; set_pxa_fb_info(&balloon3_lcd_screen); return; err2: gpio_free(BALLOON3_GPIO_RUN_BACKLIGHT); err: return; } #else static inline void balloon3_lcd_init(void) {} #endif /****************************************************************************** * SD/MMC card controller ******************************************************************************/ #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static unsigned long balloon3_mmc_pin_config[] __initdata = { GPIO32_MMC_CLK, GPIO92_MMC_DAT_0, GPIO109_MMC_DAT_1, GPIO110_MMC_DAT_2, GPIO111_MMC_DAT_3, GPIO112_MMC_CMD, }; static struct pxamci_platform_data balloon3_mci_platform_data = { .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .gpio_card_detect = -1, .gpio_card_ro = -1, .gpio_power = -1, .detect_delay_ms = 200, }; static void __init balloon3_mmc_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_mmc_pin_config)); pxa_set_mci_info(&balloon3_mci_platform_data); } #else static inline void balloon3_mmc_init(void) {} #endif /****************************************************************************** * USB Gadget ******************************************************************************/ #if defined(CONFIG_USB_GADGET_PXA27X)||defined(CONFIG_USB_GADGET_PXA27X_MODULE) static void balloon3_udc_command(int cmd) { if (cmd == PXA2XX_UDC_CMD_CONNECT) UP2OCR |= UP2OCR_DPPUE | UP2OCR_DPPUBE; else if (cmd == PXA2XX_UDC_CMD_DISCONNECT) UP2OCR &= ~UP2OCR_DPPUE; } static int balloon3_udc_is_connected(void) { return 1; } static struct pxa2xx_udc_mach_info balloon3_udc_info __initdata = { .udc_command = balloon3_udc_command, .udc_is_connected = balloon3_udc_is_connected, .gpio_pullup = -1, }; static void __init balloon3_udc_init(void) { pxa_set_udc_info(&balloon3_udc_info); platform_device_register(&balloon3_gpio_vbus); } #else static inline void balloon3_udc_init(void) {} #endif /****************************************************************************** * IrDA ******************************************************************************/ #if defined(CONFIG_IRDA) || defined(CONFIG_IRDA_MODULE) static struct pxaficp_platform_data balloon3_ficp_platform_data = { .transceiver_cap = IR_FIRMODE | IR_SIRMODE | IR_OFF, }; static void __init balloon3_irda_init(void) { pxa_set_ficp_info(&balloon3_ficp_platform_data); } #else static inline void balloon3_irda_init(void) {} #endif /****************************************************************************** * USB Host ******************************************************************************/ #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) static unsigned long balloon3_uhc_pin_config[] __initdata = { GPIO88_USBH1_PWR, GPIO89_USBH1_PEN, }; static struct pxaohci_platform_data balloon3_ohci_info = { .port_mode = PMM_PERPORT_MODE, .flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW, }; static void __init balloon3_uhc_init(void) { if (!balloon3_has(BALLOON3_FEATURE_OHCI)) return; pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_uhc_pin_config)); pxa_set_ohci_info(&balloon3_ohci_info); } #else static inline void balloon3_uhc_init(void) {} #endif /****************************************************************************** * LEDs ******************************************************************************/ #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) static unsigned long balloon3_led_pin_config[] __initdata = { GPIO9_GPIO, /* NAND activity LED */ GPIO10_GPIO, /* Heartbeat LED */ }; struct gpio_led balloon3_gpio_leds[] = { { .name = "balloon3:green:idle", .default_trigger = "heartbeat", .gpio = BALLOON3_GPIO_LED_IDLE, .active_low = 1, }, { .name = "balloon3:green:nand", .default_trigger = "nand-disk", .gpio = BALLOON3_GPIO_LED_NAND, .active_low = 1, }, }; static struct gpio_led_platform_data balloon3_gpio_led_info = { .leds = balloon3_gpio_leds, .num_leds = ARRAY_SIZE(balloon3_gpio_leds), }; static struct platform_device balloon3_leds = { .name = "leds-gpio", .id = 0, .dev = { .platform_data = &balloon3_gpio_led_info, } }; struct gpio_led balloon3_pcf_gpio_leds[] = { { .name = "balloon3:green:led0", .gpio = BALLOON3_PCF_GPIO_LED0, .active_low = 1, }, { .name = "balloon3:green:led1", .gpio = BALLOON3_PCF_GPIO_LED1, .active_low = 1, }, { .name = "balloon3:orange:led2", .gpio = BALLOON3_PCF_GPIO_LED2, .active_low = 1, }, { .name = "balloon3:orange:led3", .gpio = BALLOON3_PCF_GPIO_LED3, .active_low = 1, }, { .name = "balloon3:orange:led4", .gpio = BALLOON3_PCF_GPIO_LED4, .active_low = 1, }, { .name = "balloon3:orange:led5", .gpio = BALLOON3_PCF_GPIO_LED5, .active_low = 1, }, { .name = "balloon3:red:led6", .gpio = BALLOON3_PCF_GPIO_LED6, .active_low = 1, }, { .name = "balloon3:red:led7", .gpio = BALLOON3_PCF_GPIO_LED7, .active_low = 1, }, }; static struct gpio_led_platform_data balloon3_pcf_gpio_led_info = { .leds = balloon3_pcf_gpio_leds, .num_leds = ARRAY_SIZE(balloon3_pcf_gpio_leds), }; static struct platform_device balloon3_pcf_leds = { .name = "leds-gpio", .id = 1, .dev = { .platform_data = &balloon3_pcf_gpio_led_info, } }; static void __init balloon3_leds_init(void) { pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_led_pin_config)); platform_device_register(&balloon3_leds); platform_device_register(&balloon3_pcf_leds); } #else static inline void balloon3_leds_init(void) {} #endif /****************************************************************************** * FPGA IRQ ******************************************************************************/ static void balloon3_mask_irq(unsigned int irq) { int balloon3_irq = (irq - BALLOON3_IRQ(0)); balloon3_irq_enabled &= ~(1 << balloon3_irq); __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG); } static void balloon3_unmask_irq(unsigned int irq) { int balloon3_irq = (irq - BALLOON3_IRQ(0)); balloon3_irq_enabled |= (1 << balloon3_irq); __raw_writel(~balloon3_irq_enabled, BALLOON3_INT_CONTROL_REG); } static struct irq_chip balloon3_irq_chip = { .name = "FPGA", .ack = balloon3_mask_irq, .mask = balloon3_mask_irq, .unmask = balloon3_unmask_irq, }; static void balloon3_irq_handler(unsigned int irq, struct irq_desc *desc) { unsigned long pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & balloon3_irq_enabled; do { /* clear useless edge notification */ if (desc->chip->ack) desc->chip->ack(BALLOON3_AUX_NIRQ); while (pending) { irq = BALLOON3_IRQ(0) + __ffs(pending); generic_handle_irq(irq); pending &= pending - 1; } pending = __raw_readl(BALLOON3_INT_CONTROL_REG) & balloon3_irq_enabled; } while (pending); } static void __init balloon3_init_irq(void) { int irq; pxa27x_init_irq(); /* setup extra Balloon3 irqs */ for (irq = BALLOON3_IRQ(0); irq <= BALLOON3_IRQ(7); irq++) { set_irq_chip(irq, &balloon3_irq_chip); set_irq_handler(irq, handle_level_irq); set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); } set_irq_chained_handler(BALLOON3_AUX_NIRQ, balloon3_irq_handler); set_irq_type(BALLOON3_AUX_NIRQ, IRQ_TYPE_EDGE_FALLING); pr_debug("%s: chained handler installed - irq %d automatically " "enabled\n", __func__, BALLOON3_AUX_NIRQ); } /****************************************************************************** * GPIO expander ******************************************************************************/ #if defined(CONFIG_GPIO_PCF857X) || defined(CONFIG_GPIO_PCF857X_MODULE) static struct pcf857x_platform_data balloon3_pcf857x_pdata = { .gpio_base = BALLOON3_PCF_GPIO_BASE, .n_latch = 0, .setup = NULL, .teardown = NULL, .context = NULL, }; static struct i2c_board_info __initdata balloon3_i2c_devs[] = { { I2C_BOARD_INFO("pcf8574a", 0x38), .platform_data = &balloon3_pcf857x_pdata, }, }; static void __init balloon3_i2c_init(void) { pxa_set_i2c_info(NULL); i2c_register_board_info(0, ARRAY_AND_SIZE(balloon3_i2c_devs)); } #else static inline void balloon3_i2c_init(void) {} #endif /****************************************************************************** * NAND ******************************************************************************/ #if defined(CONFIG_MTD_NAND_PLATFORM)||defined(CONFIG_MTD_NAND_PLATFORM_MODULE) static void balloon3_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { struct nand_chip *this = mtd->priv; uint8_t balloon3_ctl_set = 0, balloon3_ctl_clr = 0; if (ctrl & NAND_CTRL_CHANGE) { if (ctrl & NAND_CLE) balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLCLE; else balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLCLE; if (ctrl & NAND_ALE) balloon3_ctl_set |= BALLOON3_NAND_CONTROL_FLALE; else balloon3_ctl_clr |= BALLOON3_NAND_CONTROL_FLALE; if (balloon3_ctl_clr) __raw_writel(balloon3_ctl_clr, BALLOON3_NAND_CONTROL_REG); if (balloon3_ctl_set) __raw_writel(balloon3_ctl_set, BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); } if (cmd != NAND_CMD_NONE) writeb(cmd, this->IO_ADDR_W); } static void balloon3_nand_select_chip(struct mtd_info *mtd, int chip) { if (chip < 0 || chip > 3) return; /* Assert all nCE lines */ __raw_writew( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3, BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); /* Deassert correct nCE line */ __raw_writew(BALLOON3_NAND_CONTROL_FLCE0 << chip, BALLOON3_NAND_CONTROL_REG); } static int balloon3_nand_probe(struct platform_device *pdev) { void __iomem *temp_map; uint16_t ver; int ret; __raw_writew(BALLOON3_NAND_CONTROL2_16BIT, BALLOON3_NAND_CONTROL2_REG | BALLOON3_FPGA_SETnCLR); ver = __raw_readw(BALLOON3_FPGA_VER); if (ver < 0x4f08) pr_warn("The FPGA code, version 0x%04x, is too old. " "NAND support might be broken in this version!", ver); /* Power up the NAND chips */ ret = gpio_request(BALLOON3_GPIO_RUN_NAND, "NAND"); if (ret) goto err1; ret = gpio_direction_output(BALLOON3_GPIO_RUN_NAND, 1); if (ret) goto err2; gpio_set_value(BALLOON3_GPIO_RUN_NAND, 1); /* Deassert all nCE lines and write protect line */ __raw_writel( BALLOON3_NAND_CONTROL_FLCE0 | BALLOON3_NAND_CONTROL_FLCE1 | BALLOON3_NAND_CONTROL_FLCE2 | BALLOON3_NAND_CONTROL_FLCE3 | BALLOON3_NAND_CONTROL_FLWP, BALLOON3_NAND_CONTROL_REG | BALLOON3_FPGA_SETnCLR); return 0; err2: gpio_free(BALLOON3_GPIO_RUN_NAND); err1: return ret; } static void balloon3_nand_remove(struct platform_device *pdev) { /* Power down the NAND chips */ gpio_set_value(BALLOON3_GPIO_RUN_NAND, 0); gpio_free(BALLOON3_GPIO_RUN_NAND); } static struct mtd_partition balloon3_partition_info[] = { [0] = { .name = "Boot", .offset = 0, .size = SZ_4M, }, [1] = { .name = "RootFS", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL }, }; static const char *balloon3_part_probes[] = { "cmdlinepart", NULL }; struct platform_nand_data balloon3_nand_pdata = { .chip = { .nr_chips = 4, .chip_offset = 0, .nr_partitions = ARRAY_SIZE(balloon3_partition_info), .partitions = balloon3_partition_info, .chip_delay = 50, .part_probe_types = balloon3_part_probes, }, .ctrl = { .hwcontrol = 0, .dev_ready = 0, .select_chip = balloon3_nand_select_chip, .cmd_ctrl = balloon3_nand_cmd_ctl, .probe = balloon3_nand_probe, .remove = balloon3_nand_remove, }, }; static struct resource balloon3_nand_resource[] = { [0] = { .start = BALLOON3_NAND_BASE, .end = BALLOON3_NAND_BASE + 0x4, .flags = IORESOURCE_MEM, }, }; static struct platform_device balloon3_nand = { .name = "gen_nand", .num_resources = ARRAY_SIZE(balloon3_nand_resource), .resource = balloon3_nand_resource, .id = -1, .dev = { .platform_data = &balloon3_nand_pdata, } }; static void __init balloon3_nand_init(void) { platform_device_register(&balloon3_nand); } #else static inline void balloon3_nand_init(void) {} #endif /****************************************************************************** * Core power regulator ******************************************************************************/ #if defined(CONFIG_REGULATOR_MAX1586) || \ defined(CONFIG_REGULATOR_MAX1586_MODULE) static struct regulator_consumer_supply balloon3_max1587a_consumers[] = { { .supply = "vcc_core", } }; static struct regulator_init_data balloon3_max1587a_v3_info = { .constraints = { .name = "vcc_core range", .min_uV = 900000, .max_uV = 1705000, .always_on = 1, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, }, .consumer_supplies = balloon3_max1587a_consumers, .num_consumer_supplies = ARRAY_SIZE(balloon3_max1587a_consumers), }; static struct max1586_subdev_data balloon3_max1587a_subdevs[] = { { .name = "vcc_core", .id = MAX1586_V3, .platform_data = &balloon3_max1587a_v3_info, } }; static struct max1586_platform_data balloon3_max1587a_info = { .subdevs = balloon3_max1587a_subdevs, .num_subdevs = ARRAY_SIZE(balloon3_max1587a_subdevs), .v3_gain = MAX1586_GAIN_R24_3k32, /* 730..1550 mV */ }; static struct i2c_board_info __initdata balloon3_pi2c_board_info[] = { { I2C_BOARD_INFO("max1586", 0x14), .platform_data = &balloon3_max1587a_info, }, }; static void __init balloon3_pmic_init(void) { pxa27x_set_i2c_power_info(NULL); i2c_register_board_info(1, ARRAY_AND_SIZE(balloon3_pi2c_board_info)); } #else static inline void balloon3_pmic_init(void) {} #endif /****************************************************************************** * Machine init ******************************************************************************/ static void __init balloon3_init(void) { ARB_CNTRL = ARB_CORE_PARK | 0x234; pxa2xx_mfp_config(ARRAY_AND_SIZE(balloon3_pin_config)); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); balloon3_i2c_init(); balloon3_irda_init(); balloon3_lcd_init(); balloon3_leds_init(); balloon3_mmc_init(); balloon3_nand_init(); balloon3_nor_init(); balloon3_pmic_init(); balloon3_ts_init(); balloon3_udc_init(); balloon3_uhc_init(); balloon3_cf_init(); } static struct map_desc balloon3_io_desc[] __initdata = { { /* CPLD/FPGA */ .virtual = BALLOON3_FPGA_VIRT, .pfn = __phys_to_pfn(BALLOON3_FPGA_PHYS), .length = BALLOON3_FPGA_LENGTH, .type = MT_DEVICE, }, }; static void __init balloon3_map_io(void) { pxa27x_map_io(); iotable_init(balloon3_io_desc, ARRAY_SIZE(balloon3_io_desc)); } MACHINE_START(BALLOON3, "Balloon3") /* Maintainer: Nick Bane. */ .map_io = balloon3_map_io, .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, .timer = &pxa_timer, .init_machine = balloon3_init, .boot_params = PHYS_OFFSET + 0x100, MACHINE_END