/* * Copyright (C) ST-Ericsson SA 2010 * * License Terms: GNU General Public License v2 * * Authors: Bengt Jonsson * * This file is based on drivers/regulator/ab8500.c * * AB8500 external regulators * * ab8500-ext supports the following regulators: * - VextSupply3 */ #include #include #include #include #include #include #include #include #include #include /** * struct ab8500_ext_regulator_info - ab8500 regulator information * @dev: device pointer * @desc: regulator description * @rdev: regulator device * @cfg: regulator configuration (extension of regulator FW configuration) * @is_enabled: status of regulator (on/off) * @update_bank: bank to control on/off * @update_reg: register to control on/off * @update_mask: mask to enable/disable and set mode of regulator * @update_val: bits holding the regulator current mode * @update_val_hp: bits to set EN pin active (LPn pin deactive) * normally this means high power mode * @update_val_lp: bits to set EN pin active and LPn pin active * normally this means low power mode * @update_val_hw: bits to set regulator pins in HW control * SysClkReq pins and logic will choose mode */ struct ab8500_ext_regulator_info { struct device *dev; struct regulator_desc desc; struct regulator_dev *rdev; struct ab8500_ext_regulator_cfg *cfg; bool is_enabled; u8 update_bank; u8 update_reg; u8 update_mask; u8 update_val; u8 update_val_hp; u8 update_val_lp; u8 update_val_hw; }; static int enable(struct ab8500_ext_regulator_info *info, u8 *regval) { int ret; *regval = info->update_val; /* * To satisfy both HW high power request and SW request, the regulator * must be on in high power. */ if (info->cfg && info->cfg->hwreq) *regval = info->update_val_hp; ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, info->update_mask, *regval); if (ret < 0) dev_err(rdev_get_dev(info->rdev), "couldn't set enable bits for regulator\n"); info->is_enabled = true; return ret; } static int ab8500_ext_regulator_enable(struct regulator_dev *rdev) { int ret; struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = enable(info, ®val); dev_dbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value):" " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); return ret; } static int disable(struct ab8500_ext_regulator_info *info, u8 *regval) { int ret; *regval = 0x0; /* * Set the regulator in HW request mode if configured */ if (info->cfg && info->cfg->hwreq) *regval = info->update_val_hw; ret = abx500_mask_and_set_register_interruptible(info->dev, info->update_bank, info->update_reg, info->update_mask, *regval); if (ret < 0) dev_err(rdev_get_dev(info->rdev), "couldn't set disable bits for regulator\n"); info->is_enabled = false; return ret; } static int ab8500_ext_regulator_disable(struct regulator_dev *rdev) { int ret; struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = disable(info, ®val); dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):" " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); return ret; } static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev) { int ret; struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); u8 regval; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } ret = abx500_get_register_interruptible(info->dev, info->update_bank, info->update_reg, ®val); if (ret < 0) { dev_err(rdev_get_dev(rdev), "couldn't read 0x%x register\n", info->update_reg); return ret; } dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):" " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); if (((regval & info->update_mask) == info->update_val_lp) || ((regval & info->update_mask) == info->update_val_hp)) info->is_enabled = true; else info->is_enabled = false; return info->is_enabled; } static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev, unsigned int mode) { int ret = 0; struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } switch (mode) { case REGULATOR_MODE_NORMAL: info->update_val = info->update_val_hp; break; case REGULATOR_MODE_IDLE: info->update_val = info->update_val_lp; break; default: return -EINVAL; } if (info->is_enabled) { u8 regval; ret = enable(info, ®val); if (ret < 0) dev_err(rdev_get_dev(rdev), "Could not set regulator mode.\n"); dev_dbg(rdev_get_dev(rdev), "%s-set_mode (bank, reg, mask, value): " "0x%x, 0x%x, 0x%x, 0x%x\n", info->desc.name, info->update_bank, info->update_reg, info->update_mask, regval); } return ret; } static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev) { struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); int ret; if (info == NULL) { dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); return -EINVAL; } if (info->update_val == info->update_val_hp) ret = REGULATOR_MODE_NORMAL; else if (info->update_val == info->update_val_lp) ret = REGULATOR_MODE_IDLE; else ret = -EINVAL; return ret; } static int ab8500_ext_fixed_get_voltage(struct regulator_dev *rdev) { struct regulation_constraints *regu_constraints = rdev->constraints; if (regu_constraints == NULL) { dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n"); return -EINVAL; } if (regu_constraints->min_uV && regu_constraints->max_uV) { if (regu_constraints->min_uV == regu_constraints->max_uV) return regu_constraints->min_uV; } return -EINVAL; } static int ab8500_ext_list_voltage(struct regulator_dev *rdev, unsigned selector) { struct regulation_constraints *regu_constraints = rdev->constraints; if (regu_constraints == NULL) { dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n"); return -EINVAL; } /* return the uV for the fixed regulators */ if (regu_constraints->min_uV && regu_constraints->max_uV) { if (regu_constraints->min_uV == regu_constraints->max_uV) return regu_constraints->min_uV; } return -EINVAL; } static struct regulator_ops ab8500_ext_regulator_ops = { .enable = ab8500_ext_regulator_enable, .disable = ab8500_ext_regulator_disable, .is_enabled = ab8500_ext_regulator_is_enabled, .set_mode = ab8500_ext_regulator_set_mode, .get_mode = ab8500_ext_regulator_get_mode, .get_voltage = ab8500_ext_fixed_get_voltage, .list_voltage = ab8500_ext_list_voltage, }; static struct ab8500_ext_regulator_info ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = { [AB8500_EXT_SUPPLY1] = { .desc = { .name = "VEXTSUPPLY1", .ops = &ab8500_ext_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_EXT_SUPPLY1, .owner = THIS_MODULE, .n_voltages = 1, }, .update_bank = 0x04, .update_reg = 0x08, .update_mask = 0x03, .update_val = 0x01, .update_val_hp = 0x01, .update_val_lp = 0x03, .update_val_hw = 0x02, }, [AB8500_EXT_SUPPLY2] = { .desc = { .name = "VEXTSUPPLY2", .ops = &ab8500_ext_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_EXT_SUPPLY2, .owner = THIS_MODULE, .n_voltages = 1, }, .update_bank = 0x04, .update_reg = 0x08, .update_mask = 0x0c, .update_val = 0x04, .update_val_hp = 0x04, .update_val_lp = 0x0c, .update_val_hw = 0x08, }, [AB8500_EXT_SUPPLY3] = { .desc = { .name = "VEXTSUPPLY3", .ops = &ab8500_ext_regulator_ops, .type = REGULATOR_VOLTAGE, .id = AB8500_EXT_SUPPLY3, .owner = THIS_MODULE, .n_voltages = 1, }, .update_bank = 0x04, .update_reg = 0x08, .update_mask = 0x30, .update_val = 0x10, .update_val_hp = 0x10, .update_val_lp = 0x30, .update_val_hw = 0x20, }, }; int ab8500_ext_regulator_init(struct platform_device *pdev) { struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); struct ab8500_platform_data *ppdata; struct ab8500_regulator_platform_data *pdata; struct regulator_config config = { }; int i, err; if (!ab8500) { dev_err(&pdev->dev, "null mfd parent\n"); return -EINVAL; } ppdata = dev_get_platdata(ab8500->dev); if (!ppdata) { dev_err(&pdev->dev, "null parent pdata\n"); return -EINVAL; } pdata = ppdata->regulator; if (!pdata) { dev_err(&pdev->dev, "null pdata\n"); return -EINVAL; } /* make sure the platform data has the correct size */ if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) { dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); return -EINVAL; } /* check for AB8500 2.x */ if (abx500_get_chip_id(&pdev->dev) < 0x30) { struct ab8500_ext_regulator_info *info; /* VextSupply3LPn is inverted on AB8500 2.x */ info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3]; info->update_val = 0x30; info->update_val_hp = 0x30; info->update_val_lp = 0x10; } /* register all regulators */ for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) { struct ab8500_ext_regulator_info *info = NULL; /* assign per-regulator data */ info = &ab8500_ext_regulator_info[i]; info->dev = &pdev->dev; info->cfg = (struct ab8500_ext_regulator_cfg *) pdata->ext_regulator[i].driver_data; config.dev = &pdev->dev; config.init_data = &pdata->ext_regulator[i]; config.driver_data = info; /* register regulator with framework */ info->rdev = regulator_register(&info->desc, &config); if (IS_ERR(info->rdev)) { err = PTR_ERR(info->rdev); dev_err(&pdev->dev, "failed to register regulator %s\n", info->desc.name); /* when we fail, un-register all earlier regulators */ while (--i >= 0) { info = &ab8500_ext_regulator_info[i]; regulator_unregister(info->rdev); } return err; } dev_dbg(rdev_get_dev(info->rdev), "%s-probed\n", info->desc.name); } return 0; } int ab8500_ext_regulator_exit(struct platform_device *pdev) { int i; for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) { struct ab8500_ext_regulator_info *info = NULL; info = &ab8500_ext_regulator_info[i]; dev_vdbg(rdev_get_dev(info->rdev), "%s-remove\n", info->desc.name); regulator_unregister(info->rdev); } return 0; } MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Bengt Jonsson "); MODULE_DESCRIPTION("AB8500 external regulator driver"); MODULE_ALIAS("platform:ab8500-ext-regulator");