// include/asm-arm/mach-omap/usb.h #ifndef __ASM_ARCH_OMAP_USB_H #define __ASM_ARCH_OMAP_USB_H #include #include #define OMAP3_HS_USB_PORTS 3 enum usbhs_omap_port_mode { OMAP_USBHS_PORT_MODE_UNUSED, OMAP_EHCI_PORT_MODE_PHY, OMAP_EHCI_PORT_MODE_TLL, OMAP_EHCI_PORT_MODE_HSIC, OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0, OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM, OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0, OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM, OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0, OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM }; struct usbhs_omap_board_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; /* have to be valid if phy_reset is true and portx is in phy mode */ int reset_gpio_port[OMAP3_HS_USB_PORTS]; /* Set this to true for ES2.x silicon */ unsigned es2_compatibility:1; unsigned phy_reset:1; /* * Regulators for USB PHYs. * Each PHY can have a separate regulator. */ struct regulator *regulator[OMAP3_HS_USB_PORTS]; }; struct ehci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; int reset_gpio_port[OMAP3_HS_USB_PORTS]; struct regulator *regulator[OMAP3_HS_USB_PORTS]; unsigned phy_reset:1; }; struct ohci_hcd_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; unsigned es2_compatibility:1; }; struct usbhs_omap_platform_data { enum usbhs_omap_port_mode port_mode[OMAP3_HS_USB_PORTS]; struct ehci_hcd_omap_platform_data *ehci_data; struct ohci_hcd_omap_platform_data *ohci_data; }; /*-------------------------------------------------------------------------*/ #define OMAP1_OTG_BASE 0xfffb0400 #define OMAP1_UDC_BASE 0xfffb4000 #define OMAP1_OHCI_BASE 0xfffba000 #define OMAP2_OHCI_BASE 0x4805e000 #define OMAP2_UDC_BASE 0x4805e200 #define OMAP2_OTG_BASE 0x4805e300 #ifdef CONFIG_ARCH_OMAP1 #define OTG_BASE OMAP1_OTG_BASE #define UDC_BASE OMAP1_UDC_BASE #define OMAP_OHCI_BASE OMAP1_OHCI_BASE #else #define OTG_BASE OMAP2_OTG_BASE #define UDC_BASE OMAP2_UDC_BASE #define OMAP_OHCI_BASE OMAP2_OHCI_BASE struct omap_musb_board_data { u8 interface_type; u8 mode; u16 power; unsigned extvbus:1; void (*set_phy_power)(u8 on); void (*clear_irq)(void); void (*set_mode)(u8 mode); void (*reset)(void); }; enum musb_interface {MUSB_INTERFACE_ULPI, MUSB_INTERFACE_UTMI}; extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usb_ehci_init(const struct usbhs_omap_board_data *pdata); extern void usb_ohci_init(const struct usbhs_omap_board_data *pdata); extern int omap_usbhs_enable(struct device *dev); extern void omap_usbhs_disable(struct device *dev); extern int omap4430_phy_power(struct device *dev, int ID, int on); extern int omap4430_phy_set_clk(struct device *dev, int on); extern int omap4430_phy_init(struct device *dev); extern int omap4430_phy_exit(struct device *dev); extern int omap4430_phy_suspend(struct device *dev, int suspend); #endif /* * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ #ifdef CONFIG_USB_GADGET_OMAP #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 #endif void omap_otg_init(struct omap_usb_config *config); #if defined(CONFIG_USB) || defined(CONFIG_USB_MODULE) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) { } #endif #if defined(CONFIG_ARCH_OMAP_OTG) || defined(CONFIG_ARCH_OMAP_OTG_MODULE) void omap2_usbfs_init(struct omap_usb_config *pdata); #else static inline void omap2_usbfs_init(struct omap_usb_config *pdata) { } #endif /*-------------------------------------------------------------------------*/ /* * OTG and transceiver registers, for OMAPs starting with ARM926 */ #define OTG_REV (OTG_BASE + 0x00) #define OTG_SYSCON_1 (OTG_BASE + 0x04) # define USB2_TRX_MODE(w) (((w)>>24)&0x07) # define USB1_TRX_MODE(w) (((w)>>20)&0x07) # define USB0_TRX_MODE(w) (((w)>>16)&0x07) # define OTG_IDLE_EN (1 << 15) # define HST_IDLE_EN (1 << 14) # define DEV_IDLE_EN (1 << 13) # define OTG_RESET_DONE (1 << 2) # define OTG_SOFT_RESET (1 << 1) #define OTG_SYSCON_2 (OTG_BASE + 0x08) # define OTG_EN (1 << 31) # define USBX_SYNCHRO (1 << 30) # define OTG_MST16 (1 << 29) # define SRP_GPDATA (1 << 28) # define SRP_GPDVBUS (1 << 27) # define SRP_GPUVBUS(w) (((w)>>24)&0x07) # define A_WAIT_VRISE(w) (((w)>>20)&0x07) # define B_ASE_BRST(w) (((w)>>16)&0x07) # define SRP_DPW (1 << 14) # define SRP_DATA (1 << 13) # define SRP_VBUS (1 << 12) # define OTG_PADEN (1 << 10) # define HMC_PADEN (1 << 9) # define UHOST_EN (1 << 8) # define HMC_TLLSPEED (1 << 7) # define HMC_TLLATTACH (1 << 6) # define OTG_HMC(w) (((w)>>0)&0x3f) #define OTG_CTRL (OTG_BASE + 0x0c) # define OTG_USB2_EN (1 << 29) # define OTG_USB2_DP (1 << 28) # define OTG_USB2_DM (1 << 27) # define OTG_USB1_EN (1 << 26) # define OTG_USB1_DP (1 << 25) # define OTG_USB1_DM (1 << 24) # define OTG_USB0_EN (1 << 23) # define OTG_USB0_DP (1 << 22) # define OTG_USB0_DM (1 << 21) # define OTG_ASESSVLD (1 << 20) # define OTG_BSESSEND (1 << 19) # define OTG_BSESSVLD (1 << 18) # define OTG_VBUSVLD (1 << 17) # define OTG_ID (1 << 16) # define OTG_DRIVER_SEL (1 << 15) # define OTG_A_SETB_HNPEN (1 << 12) # define OTG_A_BUSREQ (1 << 11) # define OTG_B_HNPEN (1 << 9) # define OTG_B_BUSREQ (1 << 8) # define OTG_BUSDROP (1 << 7) # define OTG_PULLDOWN (1 << 5) # define OTG_PULLUP (1 << 4) # define OTG_DRV_VBUS (1 << 3) # define OTG_PD_VBUS (1 << 2) # define OTG_PU_VBUS (1 << 1) # define OTG_PU_ID (1 << 0) #define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ # define DRIVER_SWITCH (1 << 15) # define A_VBUS_ERR (1 << 13) # define A_REQ_TMROUT (1 << 12) # define A_SRP_DETECT (1 << 11) # define B_HNP_FAIL (1 << 10) # define B_SRP_TMROUT (1 << 9) # define B_SRP_DONE (1 << 8) # define B_SRP_STARTED (1 << 7) # define OPRT_CHG (1 << 0) #define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ // same bits as in IRQ_EN #define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ # define OTGVPD (1 << 14) # define OTGVPU (1 << 13) # define OTGPUID (1 << 12) # define USB2VDR (1 << 10) # define USB2PDEN (1 << 9) # define USB2PUEN (1 << 8) # define USB1VDR (1 << 6) # define USB1PDEN (1 << 5) # define USB1PUEN (1 << 4) # define USB0VDR (1 << 2) # define USB0PDEN (1 << 1) # define USB0PUEN (1 << 0) #define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ #define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ /*-------------------------------------------------------------------------*/ /* OMAP1 */ #define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) # define CONF_USB2_UNI_R (1 << 8) # define CONF_USB1_UNI_R (1 << 7) # define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) # define CONF_USB0_ISOLATE_R (1 << 3) # define CONF_USB_PWRDN_DM_R (1 << 2) # define CONF_USB_PWRDN_DP_R (1 << 1) /* OMAP2 */ # define USB_UNIDIR 0x0 # define USB_UNIDIR_TLL 0x1 # define USB_BIDIR 0x2 # define USB_BIDIR_TLL 0x3 # define USBTXWRMODEI(port, x) ((x) << (22 - (port * 2))) # define USBT2TLL5PI (1 << 17) # define USB0PUENACTLOI (1 << 16) # define USBSTANDBYCTRL (1 << 15) /* AM35x */ /* USB 2.0 PHY Control */ #define CONF2_PHY_GPIOMODE (1 << 23) #define CONF2_OTGMODE (3 << 14) #define CONF2_NO_OVERRIDE (0 << 14) #define CONF2_FORCE_HOST (1 << 14) #define CONF2_FORCE_DEVICE (2 << 14) #define CONF2_FORCE_HOST_VBUS_LOW (3 << 14) #define CONF2_SESENDEN (1 << 13) #define CONF2_VBDTCTEN (1 << 12) #define CONF2_REFFREQ_24MHZ (2 << 8) #define CONF2_REFFREQ_26MHZ (7 << 8) #define CONF2_REFFREQ_13MHZ (6 << 8) #define CONF2_REFFREQ (0xf << 8) #define CONF2_PHYCLKGD (1 << 7) #define CONF2_VBUSSENSE (1 << 6) #define CONF2_PHY_PLLON (1 << 5) #define CONF2_RESET (1 << 4) #define CONF2_PHYPWRDN (1 << 3) #define CONF2_OTGPWRDN (1 << 2) #define CONF2_DATPOL (1 << 1) #if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_USB) u32 omap1_usb0_init(unsigned nwires, unsigned is_device); u32 omap1_usb1_init(unsigned nwires); u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup); #else static inline u32 omap1_usb0_init(unsigned nwires, unsigned is_device) { return 0; } static inline u32 omap1_usb1_init(unsigned nwires) { return 0; } static inline u32 omap1_usb2_init(unsigned nwires, unsigned alt_pingroup) { return 0; } #endif #endif /* __ASM_ARCH_OMAP_USB_H */