/* * Copyright (C) 1999 Eric Youngdale * Copyright (C) 2014 Christoph Hellwig * * SCSI queueing library. * Initial versions: Eric Youngdale (eric@andante.org). * Based upon conversations with large numbers * of people at Linux Expo. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "scsi_priv.h" #include "scsi_logging.h" #define SG_MEMPOOL_NR ARRAY_SIZE(scsi_sg_pools) #define SG_MEMPOOL_SIZE 2 struct scsi_host_sg_pool { size_t size; char *name; struct kmem_cache *slab; mempool_t *pool; }; #define SP(x) { .size = x, "sgpool-" __stringify(x) } #if (SCSI_MAX_SG_SEGMENTS < 32) #error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater) #endif static struct scsi_host_sg_pool scsi_sg_pools[] = { SP(8), SP(16), #if (SCSI_MAX_SG_SEGMENTS > 32) SP(32), #if (SCSI_MAX_SG_SEGMENTS > 64) SP(64), #if (SCSI_MAX_SG_SEGMENTS > 128) SP(128), #if (SCSI_MAX_SG_SEGMENTS > 256) #error SCSI_MAX_SG_SEGMENTS is too large (256 MAX) #endif #endif #endif #endif SP(SCSI_MAX_SG_SEGMENTS) }; #undef SP struct kmem_cache *scsi_sdb_cache; /* * When to reinvoke queueing after a resource shortage. It's 3 msecs to * not change behaviour from the previous unplug mechanism, experimentation * may prove this needs changing. */ #define SCSI_QUEUE_DELAY 3 static void scsi_set_blocked(struct scsi_cmnd *cmd, int reason) { struct Scsi_Host *host = cmd->device->host; struct scsi_device *device = cmd->device; struct scsi_target *starget = scsi_target(device); /* * Set the appropriate busy bit for the device/host. * * If the host/device isn't busy, assume that something actually * completed, and that we should be able to queue a command now. * * Note that the prior mid-layer assumption that any host could * always queue at least one command is now broken. The mid-layer * will implement a user specifiable stall (see * scsi_host.max_host_blocked and scsi_device.max_device_blocked) * if a command is requeued with no other commands outstanding * either for the device or for the host. */ switch (reason) { case SCSI_MLQUEUE_HOST_BUSY: atomic_set(&host->host_blocked, host->max_host_blocked); break; case SCSI_MLQUEUE_DEVICE_BUSY: case SCSI_MLQUEUE_EH_RETRY: atomic_set(&device->device_blocked, device->max_device_blocked); break; case SCSI_MLQUEUE_TARGET_BUSY: atomic_set(&starget->target_blocked, starget->max_target_blocked); break; } } static void scsi_mq_requeue_cmd(struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; struct request_queue *q = cmd->request->q; blk_mq_requeue_request(cmd->request); blk_mq_kick_requeue_list(q); put_device(&sdev->sdev_gendev); } /** * __scsi_queue_insert - private queue insertion * @cmd: The SCSI command being requeued * @reason: The reason for the requeue * @unbusy: Whether the queue should be unbusied * * This is a private queue insertion. The public interface * scsi_queue_insert() always assumes the queue should be unbusied * because it's always called before the completion. This function is * for a requeue after completion, which should only occur in this * file. */ static void __scsi_queue_insert(struct scsi_cmnd *cmd, int reason, int unbusy) { struct scsi_device *device = cmd->device; struct request_queue *q = device->request_queue; unsigned long flags; SCSI_LOG_MLQUEUE(1, scmd_printk(KERN_INFO, cmd, "Inserting command %p into mlqueue\n", cmd)); scsi_set_blocked(cmd, reason); /* * Decrement the counters, since these commands are no longer * active on the host/device. */ if (unbusy) scsi_device_unbusy(device); /* * Requeue this command. It will go before all other commands * that are already in the queue. Schedule requeue work under * lock such that the kblockd_schedule_work() call happens * before blk_cleanup_queue() finishes. */ cmd->result = 0; if (q->mq_ops) { scsi_mq_requeue_cmd(cmd); return; } spin_lock_irqsave(q->queue_lock, flags); blk_requeue_request(q, cmd->request); kblockd_schedule_work(&device->requeue_work); spin_unlock_irqrestore(q->queue_lock, flags); } /* * Function: scsi_queue_insert() * * Purpose: Insert a command in the midlevel queue. * * Arguments: cmd - command that we are adding to queue. * reason - why we are inserting command to queue. * * Lock status: Assumed that lock is not held upon entry. * * Returns: Nothing. * * Notes: We do this for one of two cases. Either the host is busy * and it cannot accept any more commands for the time being, * or the device returned QUEUE_FULL and can accept no more * commands. * Notes: This could be called either from an interrupt context or a * normal process context. */ void scsi_queue_insert(struct scsi_cmnd *cmd, int reason) { __scsi_queue_insert(cmd, reason, 1); } /** * scsi_execute - insert request and wait for the result * @sdev: scsi device * @cmd: scsi command * @data_direction: data direction * @buffer: data buffer * @bufflen: len of buffer * @sense: optional sense buffer * @timeout: request timeout in seconds * @retries: number of times to retry request * @flags: or into request flags; * @resid: optional residual length * * returns the req->errors value which is the scsi_cmnd result * field. */ int scsi_execute(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, unsigned char *sense, int timeout, int retries, u64 flags, int *resid) { struct request *req; int write = (data_direction == DMA_TO_DEVICE); int ret = DRIVER_ERROR << 24; req = blk_get_request(sdev->request_queue, write, __GFP_WAIT); if (IS_ERR(req)) return ret; blk_rq_set_block_pc(req); if (bufflen && blk_rq_map_kern(sdev->request_queue, req, buffer, bufflen, __GFP_WAIT)) goto out; req->cmd_len = COMMAND_SIZE(cmd[0]); memcpy(req->cmd, cmd, req->cmd_len); req->sense = sense; req->sense_len = 0; req->retries = retries; req->timeout = timeout; req->cmd_flags |= flags | REQ_QUIET | REQ_PREEMPT; /* * head injection *required* here otherwise quiesce won't work */ blk_execute_rq(req->q, NULL, req, 1); /* * Some devices (USB mass-storage in particular) may transfer * garbage data together with a residue indicating that the data * is invalid. Prevent the garbage from being misinterpreted * and prevent security leaks by zeroing out the excess data. */ if (unlikely(req->resid_len > 0 && req->resid_len <= bufflen)) memset(buffer + (bufflen - req->resid_len), 0, req->resid_len); if (resid) *resid = req->resid_len; ret = req->errors; out: blk_put_request(req); return ret; } EXPORT_SYMBOL(scsi_execute); int scsi_execute_req_flags(struct scsi_device *sdev, const unsigned char *cmd, int data_direction, void *buffer, unsigned bufflen, struct scsi_sense_hdr *sshdr, int timeout, int retries, int *resid, u64 flags) { char *sense = NULL; int result; if (sshdr) { sense = kzalloc(SCSI_SENSE_BUFFERSIZE, GFP_NOIO); if (!sense) return DRIVER_ERROR << 24; } result = scsi_execute(sdev, cmd, data_direction, buffer, bufflen, sense, timeout, retries, flags, resid); if (sshdr) scsi_normalize_sense(sense, SCSI_SENSE_BUFFERSIZE, sshdr); kfree(sense); return result; } EXPORT_SYMBOL(scsi_execute_req_flags); /* * Function: scsi_init_cmd_errh() * * Purpose: Initialize cmd fields related to error handling. * * Arguments: cmd - command that is ready to be queued. * * Notes: This function has the job of initializing a number of * fields related to error handling. Typically this will * be called once for each command, as required. */ static void scsi_init_cmd_errh(struct scsi_cmnd *cmd) { cmd->serial_number = 0; scsi_set_resid(cmd, 0); memset(cmd->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); if (cmd->cmd_len == 0) cmd->cmd_len = scsi_command_size(cmd->cmnd); } void scsi_device_unbusy(struct scsi_device *sdev) { struct Scsi_Host *shost = sdev->host; struct scsi_target *starget = scsi_target(sdev); unsigned long flags; atomic_dec(&shost->host_busy); if (starget->can_queue > 0) atomic_dec(&starget->target_busy); if (unlikely(scsi_host_in_recovery(shost) && (shost->host_failed || shost->host_eh_scheduled))) { spin_lock_irqsave(shost->host_lock, flags); scsi_eh_wakeup(shost); spin_unlock_irqrestore(shost->host_lock, flags); } atomic_dec(&sdev->device_busy); } static void scsi_kick_queue(struct request_queue *q) { if (q->mq_ops) blk_mq_start_hw_queues(q); else blk_run_queue(q); } /* * Called for single_lun devices on IO completion. Clear starget_sdev_user, * and call blk_run_queue for all the scsi_devices on the target - * including current_sdev first. * * Called with *no* scsi locks held. */ static void scsi_single_lun_run(struct scsi_device *current_sdev) { struct Scsi_Host *shost = current_sdev->host; struct scsi_device *sdev, *tmp; struct scsi_target *starget = scsi_target(current_sdev); unsigned long flags; spin_lock_irqsave(shost->host_lock, flags); starget->starget_sdev_user = NULL; spin_unlock_irqrestore(shost->host_lock, flags); /* * Call blk_run_queue for all LUNs on the target, starting with * current_sdev. We race with others (to set starget_sdev_user), * but in most cases, we will be first. Ideally, each LU on the * target would get some limited time or requests on the target. */ scsi_kick_queue(current_sdev->request_queue); spin_lock_irqsave(shost->host_lock, flags); if (starget->starget_sdev_user) goto out; list_for_each_entry_safe(sdev, tmp, &starget->devices, same_target_siblings) { if (sdev == current_sdev) continue; if (scsi_device_get(sdev)) continue; spin_unlock_irqrestore(shost->host_lock, flags); scsi_kick_queue(sdev->request_queue); spin_lock_irqsave(shost->host_lock, flags); scsi_device_put(sdev); } out: spin_unlock_irqrestore(shost->host_lock, flags); } static inline bool scsi_device_is_busy(struct scsi_device *sdev) { if (atomic_read(&sdev->device_busy) >= sdev->queue_depth) return true; if (atomic_read(&sdev->device_blocked) > 0) return true; return false; } static inline bool scsi_target_is_busy(struct scsi_target *starget) { if (starget->can_queue > 0) { if (atomic_read(&starget->target_busy) >= starget->can_queue) return true; if (atomic_read(&starget->target_blocked) > 0) return true; } return false; } static inline bool scsi_host_is_busy(struct Scsi_Host *shost) { if (shost->can_queue > 0 && atomic_read(&shost->host_busy) >= shost->can_queue) return true; if (atomic_read(&shost->host_blocked) > 0) return true; if (shost->host_self_blocked) return true; return false; } static void scsi_starved_list_run(struct Scsi_Host *shost) { LIST_HEAD(starved_list); struct scsi_device *sdev; unsigned long flags; spin_lock_irqsave(shost->host_lock, flags); list_splice_init(&shost->starved_list, &starved_list); while (!list_empty(&starved_list)) { struct request_queue *slq; /* * As long as shost is accepting commands and we have * starved queues, call blk_run_queue. scsi_request_fn * drops the queue_lock and can add us back to the * starved_list. * * host_lock protects the starved_list and starved_entry. * scsi_request_fn must get the host_lock before checking * or modifying starved_list or starved_entry. */ if (scsi_host_is_busy(shost)) break; sdev = list_entry(starved_list.next, struct scsi_device, starved_entry); list_del_init(&sdev->starved_entry); if (scsi_target_is_busy(scsi_target(sdev))) { list_move_tail(&sdev->starved_entry, &shost->starved_list); continue; } /* * Once we drop the host lock, a racing scsi_remove_device() * call may remove the sdev from the starved list and destroy * it and the queue. Mitigate by taking a reference to the * queue and never touching the sdev again after we drop the * host lock. Note: if __scsi_remove_device() invokes * blk_cleanup_queue() before the queue is run from this * function then blk_run_queue() will return immediately since * blk_cleanup_queue() marks the queue with QUEUE_FLAG_DYING. */ slq = sdev->request_queue; if (!blk_get_queue(slq)) continue; spin_unlock_irqrestore(shost->host_lock, flags); scsi_kick_queue(slq); blk_put_queue(slq); spin_lock_irqsave(shost->host_lock, flags); } /* put any unprocessed entries back */ list_splice(&starved_list, &shost->starved_list); spin_unlock_irqrestore(shost->host_lock, flags); } /* * Function: scsi_run_queue() * * Purpose: Select a proper request queue to serve next * * Arguments: q - last request's queue * * Returns: Nothing * * Notes: The previous command was completely finished, start * a new one if possible. */ static void scsi_run_queue(struct request_queue *q) { struct scsi_device *sdev = q->queuedata; if (scsi_target(sdev)->single_lun) scsi_single_lun_run(sdev); if (!list_empty(&sdev->host->starved_list)) scsi_starved_list_run(sdev->host); if (q->mq_ops) blk_mq_start_stopped_hw_queues(q, false); else blk_run_queue(q); } void scsi_requeue_run_queue(struct work_struct *work) { struct scsi_device *sdev; struct request_queue *q; sdev = container_of(work, struct scsi_device, requeue_work); q = sdev->request_queue; scsi_run_queue(q); } /* * Function: scsi_requeue_command() * * Purpose: Handle post-processing of completed commands. * * Arguments: q - queue to operate on * cmd - command that may need to be requeued. * * Returns: Nothing * * Notes: After command completion, there may be blocks left * over which weren't finished by the previous command * this can be for a number of reasons - the main one is * I/O errors in the middle of the request, in which case * we need to request the blocks that come after the bad * sector. * Notes: Upon return, cmd is a stale pointer. */ static void scsi_requeue_command(struct request_queue *q, struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; struct request *req = cmd->request; unsigned long flags; spin_lock_irqsave(q->queue_lock, flags); blk_unprep_request(req); req->special = NULL; scsi_put_command(cmd); blk_requeue_request(q, req); spin_unlock_irqrestore(q->queue_lock, flags); scsi_run_queue(q); put_device(&sdev->sdev_gendev); } void scsi_next_command(struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; struct request_queue *q = sdev->request_queue; scsi_put_command(cmd); scsi_run_queue(q); put_device(&sdev->sdev_gendev); } void scsi_run_host_queues(struct Scsi_Host *shost) { struct scsi_device *sdev; shost_for_each_device(sdev, shost) scsi_run_queue(sdev->request_queue); } static inline unsigned int scsi_sgtable_index(unsigned short nents) { unsigned int index; BUG_ON(nents > SCSI_MAX_SG_SEGMENTS); if (nents <= 8) index = 0; else index = get_count_order(nents) - 3; return index; } static void scsi_sg_free(struct scatterlist *sgl, unsigned int nents) { struct scsi_host_sg_pool *sgp; sgp = scsi_sg_pools + scsi_sgtable_index(nents); mempool_free(sgl, sgp->pool); } static struct scatterlist *scsi_sg_alloc(unsigned int nents, gfp_t gfp_mask) { struct scsi_host_sg_pool *sgp; sgp = scsi_sg_pools + scsi_sgtable_index(nents); return mempool_alloc(sgp->pool, gfp_mask); } static void scsi_free_sgtable(struct scsi_data_buffer *sdb, bool mq) { if (mq && sdb->table.nents <= SCSI_MAX_SG_SEGMENTS) return; __sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free); } static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, gfp_t gfp_mask, bool mq) { struct scatterlist *first_chunk = NULL; int ret; BUG_ON(!nents); if (mq) { if (nents <= SCSI_MAX_SG_SEGMENTS) { sdb->table.nents = nents; sg_init_table(sdb->table.sgl, sdb->table.nents); return 0; } first_chunk = sdb->table.sgl; } ret = __sg_alloc_table(&sdb->table, nents, SCSI_MAX_SG_SEGMENTS, first_chunk, gfp_mask, scsi_sg_alloc); if (unlikely(ret)) scsi_free_sgtable(sdb, mq); return ret; } static void scsi_uninit_cmd(struct scsi_cmnd *cmd) { if (cmd->request->cmd_type == REQ_TYPE_FS) { struct scsi_driver *drv = scsi_cmd_to_driver(cmd); if (drv->uninit_command) drv->uninit_command(cmd); } } static void scsi_mq_free_sgtables(struct scsi_cmnd *cmd) { if (cmd->sdb.table.nents) scsi_free_sgtable(&cmd->sdb, true); if (cmd->request->next_rq && cmd->request->next_rq->special) scsi_free_sgtable(cmd->request->next_rq->special, true); if (scsi_prot_sg_count(cmd)) scsi_free_sgtable(cmd->prot_sdb, true); } static void scsi_mq_uninit_cmd(struct scsi_cmnd *cmd) { struct scsi_device *sdev = cmd->device; struct Scsi_Host *shost = sdev->host; unsigned long flags; scsi_mq_free_sgtables(cmd); scsi_uninit_cmd(cmd); if (shost->use_cmd_list) { BUG_ON(list_empty(&cmd->list)); spin_lock_irqsave(&sdev->list_lock, flags); list_del_init(&cmd->list); spin_unlock_irqrestore(&sdev->list_lock, flags); } } /* * Function: scsi_release_buffers() * * Purpose: Free resources allocate for a scsi_command. * * Arguments: cmd - command that we are bailing. * * Lock status: Assumed that no lock is held upon entry. * * Returns: Nothing * * Notes: In the event that an upper level driver rejects a * command, we must release resources allocated during * the __init_io() function. Primarily this would involve * the scatter-gather table. */ static void scsi_release_buffers(struct scsi_cmnd *cmd) { if (cmd->sdb.table.nents) scsi_free_sgtable(&cmd->sdb, false); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); if (scsi_prot_sg_count(cmd)) scsi_free_sgtable(cmd->prot_sdb, false); } static void scsi_release_bidi_buffers(struct scsi_cmnd *cmd) { struct scsi_data_buffer *bidi_sdb = cmd->request->next_rq->special; scsi_free_sgtable(bidi_sdb, false); kmem_cache_free(scsi_sdb_cache, bidi_sdb); cmd->request->next_rq->special = NULL; } static bool scsi_end_request(struct request *req, int error, unsigned int bytes, unsigned int bidi_bytes) { struct scsi_cmnd *cmd = req->special; struct scsi_device *sdev = cmd->device; struct request_queue *q = sdev->request_queue; if (blk_update_request(req, error, bytes)) return true; /* Bidi request must be completed as a whole */ if (unlikely(bidi_bytes) && blk_update_request(req->next_rq, error, bidi_bytes)) return true; if (blk_queue_add_random(q)) add_disk_randomness(req->rq_disk); if (req->mq_ctx) { /* * In the MQ case the command gets freed by __blk_mq_end_request, * so we have to do all cleanup that depends on it earlier. * * We also can't kick the queues from irq context, so we * will have to defer it to a workqueue. */ scsi_mq_uninit_cmd(cmd); __blk_mq_end_request(req, error); if (scsi_target(sdev)->single_lun || !list_empty(&sdev->host->starved_list)) kblockd_schedule_work(&sdev->requeue_work); else blk_mq_start_stopped_hw_queues(q, true); put_device(&sdev->sdev_gendev); } else { unsigned long flags; if (bidi_bytes) scsi_release_bidi_buffers(cmd); spin_lock_irqsave(q->queue_lock, flags); blk_finish_request(req, error); spin_unlock_irqrestore(q->queue_lock, flags); scsi_release_buffers(cmd); scsi_next_command(cmd); } return false; } /** * __scsi_error_from_host_byte - translate SCSI error code into errno * @cmd: SCSI command (unused) * @result: scsi error code * * Translate SCSI error code into standard UNIX errno. * Return values: * -ENOLINK temporary transport failure * -EREMOTEIO permanent target failure, do not retry * -EBADE permanent nexus failure, retry on other path * -ENOSPC No write space available * -ENODATA Medium error * -EIO unspecified I/O error */ static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result) { int error = 0; switch(host_byte(result)) { case DID_TRANSPORT_FAILFAST: error = -ENOLINK; break; case DID_TARGET_FAILURE: set_host_byte(cmd, DID_OK); error = -EREMOTEIO; break; case DID_NEXUS_FAILURE: set_host_byte(cmd, DID_OK); error = -EBADE; break; case DID_ALLOC_FAILURE: set_host_byte(cmd, DID_OK); error = -ENOSPC; break; case DID_MEDIUM_ERROR: set_host_byte(cmd, DID_OK); error = -ENODATA; break; default: error = -EIO; break; } return error; } /* * Function: scsi_io_completion() * * Purpose: Completion processing for block device I/O requests. * * Arguments: cmd - command that is finished. * * Lock status: Assumed that no lock is held upon entry. * * Returns: Nothing * * Notes: We will finish off the specified number of sectors. If we * are done, the command block will be released and the queue * function will be goosed. If we are not done then we have to * figure out what to do next: * * a) We can call scsi_requeue_command(). The request * will be unprepared and put back on the queue. Then * a new command will be created for it. This should * be used if we made forward progress, or if we want * to switch from READ(10) to READ(6) for example. * * b) We can call __scsi_queue_insert(). The request will * be put back on the queue and retried using the same * command as before, possibly after a delay. * * c) We can call scsi_end_request() with -EIO to fail * the remainder of the request. */ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) { int result = cmd->result; struct request_queue *q = cmd->device->request_queue; struct request *req = cmd->request; int error = 0; struct scsi_sense_hdr sshdr; int sense_valid = 0; int sense_deferred = 0; enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY, ACTION_DELAYED_RETRY} action; unsigned long wait_for = (cmd->allowed + 1) * req->timeout; if (result) { sense_valid = scsi_command_normalize_sense(cmd, &sshdr); if (sense_valid) sense_deferred = scsi_sense_is_deferred(&sshdr); } if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */ if (result) { if (sense_valid && req->sense) { /* * SG_IO wants current and deferred errors */ int len = 8 + cmd->sense_buffer[7]; if (len > SCSI_SENSE_BUFFERSIZE) len = SCSI_SENSE_BUFFERSIZE; memcpy(req->sense, cmd->sense_buffer, len); req->sense_len = len; } if (!sense_deferred) error = __scsi_error_from_host_byte(cmd, result); } /* * __scsi_error_from_host_byte may have reset the host_byte */ req->errors = cmd->result; req->resid_len = scsi_get_resid(cmd); if (scsi_bidi_cmnd(cmd)) { /* * Bidi commands Must be complete as a whole, * both sides at once. */ req->next_rq->resid_len = scsi_in(cmd)->resid; if (scsi_end_request(req, 0, blk_rq_bytes(req), blk_rq_bytes(req->next_rq))) BUG(); return; } } else if (blk_rq_bytes(req) == 0 && result && !sense_deferred) { /* * Certain non BLOCK_PC requests are commands that don't * actually transfer anything (FLUSH), so cannot use * good_bytes != blk_rq_bytes(req) as the signal for an error. * This sets the error explicitly for the problem case. */ error = __scsi_error_from_host_byte(cmd, result); } /* no bidi support for !REQ_TYPE_BLOCK_PC yet */ BUG_ON(blk_bidi_rq(req)); /* * Next deal with any sectors which we were able to correctly * handle. */ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, cmd, "%u sectors total, %d bytes done.\n", blk_rq_sectors(req), good_bytes)); /* * Recovered errors need reporting, but they're always treated * as success, so fiddle the result code here. For BLOCK_PC * we already took a copy of the original into rq->errors which * is what gets returned to the user */ if (sense_valid && (sshdr.sense_key == RECOVERED_ERROR)) { /* if ATA PASS-THROUGH INFORMATION AVAILABLE skip * print since caller wants ATA registers. Only occurs on * SCSI ATA PASS_THROUGH commands when CK_COND=1 */ if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d)) ; else if (!(req->cmd_flags & REQ_QUIET)) scsi_print_sense(cmd); result = 0; /* BLOCK_PC may have set error */ error = 0; } /* * If we finished all bytes in the request we are done now. */ if (!scsi_end_request(req, error, good_bytes, 0)) return; /* * Kill remainder if no retrys. */ if (error && scsi_noretry_cmd(cmd)) { if (scsi_end_request(req, error, blk_rq_bytes(req), 0)) BUG(); return; } /* * If there had been no error, but we have leftover bytes in the * requeues just queue the command up again. */ if (result == 0) goto requeue; error = __scsi_error_from_host_byte(cmd, result); if (host_byte(result) == DID_RESET) { /* Third party bus reset or reset for error recovery * reasons. Just retry the command and see what * happens. */ action = ACTION_RETRY; } else if (sense_valid && !sense_deferred) { switch (sshdr.sense_key) { case UNIT_ATTENTION: if (cmd->device->removable) { /* Detected disc change. Set a bit * and quietly refuse further access. */ cmd->device->changed = 1; action = ACTION_FAIL; } else { /* Must have been a power glitch, or a * bus reset. Could not have been a * media change, so we just retry the * command and see what happens. */ action = ACTION_RETRY; } break; case ILLEGAL_REQUEST: /* If we had an ILLEGAL REQUEST returned, then * we may have performed an unsupported * command. The only thing this should be * would be a ten byte read where only a six * byte read was supported. Also, on a system * where READ CAPACITY failed, we may have * read past the end of the disk. */ if ((cmd->device->use_10_for_rw && sshdr.asc == 0x20 && sshdr.ascq == 0x00) && (cmd->cmnd[0] == READ_10 || cmd->cmnd[0] == WRITE_10)) { /* This will issue a new 6-byte command. */ cmd->device->use_10_for_rw = 0; action = ACTION_REPREP; } else if (sshdr.asc == 0x10) /* DIX */ { action = ACTION_FAIL; error = -EILSEQ; /* INVALID COMMAND OPCODE or INVALID FIELD IN CDB */ } else if (sshdr.asc == 0x20 || sshdr.asc == 0x24) { action = ACTION_FAIL; error = -EREMOTEIO; } else action = ACTION_FAIL; break; case ABORTED_COMMAND: action = ACTION_FAIL; if (sshdr.asc == 0x10) /* DIF */ error = -EILSEQ; break; case NOT_READY: /* If the device is in the process of becoming * ready, or has a temporary blockage, retry. */ if (sshdr.asc == 0x04) { switch (sshdr.ascq) { case 0x01: /* becoming ready */ case 0x04: /* format in progress */ case 0x05: /* rebuild in progress */ case 0x06: /* recalculation in progress */ case 0x07: /* operation in progress */ case 0x08: /* Long write in progress */ case 0x09: /* self test in progress */ case 0x14: /* space allocation in progress */ action = ACTION_DELAYED_RETRY; break; default: action = ACTION_FAIL; break; } } else action = ACTION_FAIL; break; case VOLUME_OVERFLOW: /* See SSC3rXX or current. */ action = ACTION_FAIL; break; default: action = ACTION_FAIL; break; } } else action = ACTION_FAIL; if (action != ACTION_FAIL && time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) action = ACTION_FAIL; switch (action) { case ACTION_FAIL: /* Give up and fail the remainder of the request */ if (!(req->cmd_flags & REQ_QUIET)) { scsi_print_result(cmd); if (driver_byte(result) & DRIVER_SENSE) scsi_print_sense(cmd); scsi_print_command(cmd); } if (!scsi_end_request(req, error, blk_rq_err_bytes(req), 0)) return; /*FALLTHRU*/ case ACTION_REPREP: requeue: /* Unprep the request and put it back at the head of the queue. * A new command will be prepared and issued. */ if (q->mq_ops) { cmd->request->cmd_flags &= ~REQ_DONTPREP; scsi_mq_uninit_cmd(cmd); scsi_mq_requeue_cmd(cmd); } else { scsi_release_buffers(cmd); scsi_requeue_command(q, cmd); } break; case ACTION_RETRY: /* Retry the same command immediately */ __scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY, 0); break; case ACTION_DELAYED_RETRY: /* Retry the same command after a delay */ __scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY, 0); break; } } static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb, gfp_t gfp_mask) { int count; /* * If sg table allocation fails, requeue request later. */ if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments, gfp_mask, req->mq_ctx != NULL))) return BLKPREP_DEFER; /* * Next, walk the list, and fill in the addresses and sizes of * each segment. */ count = blk_rq_map_sg(req->q, req, sdb->table.sgl); BUG_ON(count > sdb->table.nents); sdb->table.nents = count; sdb->length = blk_rq_bytes(req); return BLKPREP_OK; } /* * Function: scsi_init_io() * * Purpose: SCSI I/O initialize function. * * Arguments: cmd - Command descriptor we wish to initialize * * Returns: 0 on success * BLKPREP_DEFER if the failure is retryable * BLKPREP_KILL if the failure is fatal */ int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask) { struct scsi_device *sdev = cmd->device; struct request *rq = cmd->request; bool is_mq = (rq->mq_ctx != NULL); int error; BUG_ON(!rq->nr_phys_segments); error = scsi_init_sgtable(rq, &cmd->sdb, gfp_mask); if (error) goto err_exit; if (blk_bidi_rq(rq)) { if (!rq->q->mq_ops) { struct scsi_data_buffer *bidi_sdb = kmem_cache_zalloc(scsi_sdb_cache, GFP_ATOMIC); if (!bidi_sdb) { error = BLKPREP_DEFER; goto err_exit; } rq->next_rq->special = bidi_sdb; } error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special, GFP_ATOMIC); if (error) goto err_exit; } if (blk_integrity_rq(rq)) { struct scsi_data_buffer *prot_sdb = cmd->prot_sdb; int ivecs, count; BUG_ON(prot_sdb == NULL); ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio); if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask, is_mq)) { error = BLKPREP_DEFER; goto err_exit; } count = blk_rq_map_integrity_sg(rq->q, rq->bio, prot_sdb->table.sgl); BUG_ON(unlikely(count > ivecs)); BUG_ON(unlikely(count > queue_max_integrity_segments(rq->q))); cmd->prot_sdb = prot_sdb; cmd->prot_sdb->table.nents = count; } return BLKPREP_OK; err_exit: if (is_mq) { scsi_mq_free_sgtables(cmd); } else { scsi_release_buffers(cmd); cmd->request->special = NULL; scsi_put_command(cmd); put_device(&sdev->sdev_gendev); } return error; } EXPORT_SYMBOL(scsi_init_io); static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd; if (!req->special) { /* Bail if we can't get a reference to the device */ if (!get_device(&sdev->sdev_gendev)) return NULL; cmd = scsi_get_command(sdev, GFP_ATOMIC); if (unlikely(!cmd)) { put_device(&sdev->sdev_gendev); return NULL; } req->special = cmd; } else { cmd = req->special; } /* pull a tag out of the request if we have one */ cmd->tag = req->tag; cmd->request = req; cmd->cmnd = req->cmd; cmd->prot_op = SCSI_PROT_NORMAL; return cmd; } static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd = req->special; /* * BLOCK_PC requests may transfer data, in which case they must * a bio attached to them. Or they might contain a SCSI command * that does not transfer data, in which case they may optionally * submit a request without an attached bio. */ if (req->bio) { int ret = scsi_init_io(cmd, GFP_ATOMIC); if (unlikely(ret)) return ret; } else { BUG_ON(blk_rq_bytes(req)); memset(&cmd->sdb, 0, sizeof(cmd->sdb)); } cmd->cmd_len = req->cmd_len; cmd->transfersize = blk_rq_bytes(req); cmd->allowed = req->retries; return BLKPREP_OK; } /* * Setup a REQ_TYPE_FS command. These are simple request from filesystems * that still need to be translated to SCSI CDBs from the ULD. */ static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd = req->special; if (unlikely(sdev->scsi_dh_data && sdev->scsi_dh_data->scsi_dh && sdev->scsi_dh_data->scsi_dh->prep_fn)) { int ret = sdev->scsi_dh_data->scsi_dh->prep_fn(sdev, req); if (ret != BLKPREP_OK) return ret; } memset(cmd->cmnd, 0, BLK_MAX_CDB); return scsi_cmd_to_driver(cmd)->init_command(cmd); } static int scsi_setup_cmnd(struct scsi_device *sdev, struct request *req) { struct scsi_cmnd *cmd = req->special; if (!blk_rq_bytes(req)) cmd->sc_data_direction = DMA_NONE; else if (rq_data_dir(req) == WRITE) cmd->sc_data_direction = DMA_TO_DEVICE; else cmd->sc_data_direction = DMA_FROM_DEVICE; switch (req->cmd_type) { case REQ_TYPE_FS: return scsi_setup_fs_cmnd(sdev, req); case REQ_TYPE_BLOCK_PC: return scsi_setup_blk_pc_cmnd(sdev, req); default: return BLKPREP_KILL; } } static int scsi_prep_state_check(struct scsi_device *sdev, struct request *req) { int ret = BLKPREP_OK; /* * If the device is not in running state we will reject some * or all commands. */ if (unlikely(sdev->sdev_state != SDEV_RUNNING)) { switch (sdev->sdev_state) { case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: /* * If the device is offline we refuse to process any * commands. The device must be brought online * before trying any recovery commands. */ sdev_printk(KERN_ERR, sdev, "rejecting I/O to offline device\n"); ret = BLKPREP_KILL; break; case SDEV_DEL: /* * If the device is fully deleted, we refuse to * process any commands as well. */ sdev_printk(KERN_ERR, sdev, "rejecting I/O to dead device\n"); ret = BLKPREP_KILL; break; case SDEV_QUIESCE: case SDEV_BLOCK: case SDEV_CREATED_BLOCK: /* * If the devices is blocked we defer normal commands. */ if (!(req->cmd_flags & REQ_PREEMPT)) ret = BLKPREP_DEFER; break; default: /* * For any other not fully online state we only allow * special commands. In particular any user initiated * command is not allowed. */ if (!(req->cmd_flags & REQ_PREEMPT)) ret = BLKPREP_KILL; break; } } return ret; } static int scsi_prep_return(struct request_queue *q, struct request *req, int ret) { struct scsi_device *sdev = q->queuedata; switch (ret) { case BLKPREP_KILL: req->errors = DID_NO_CONNECT << 16; /* release the command and kill it */ if (req->special) { struct scsi_cmnd *cmd = req->special; scsi_release_buffers(cmd); scsi_put_command(cmd); put_device(&sdev->sdev_gendev); req->special = NULL; } break; case BLKPREP_DEFER: /* * If we defer, the blk_peek_request() returns NULL, but the * queue must be restarted, so we schedule a callback to happen * shortly. */ if (atomic_read(&sdev->device_busy) == 0) blk_delay_queue(q, SCSI_QUEUE_DELAY); break; default: req->cmd_flags |= REQ_DONTPREP; } return ret; } static int scsi_prep_fn(struct request_queue *q, struct request *req) { struct scsi_device *sdev = q->queuedata; struct scsi_cmnd *cmd; int ret; ret = scsi_prep_state_check(sdev, req); if (ret != BLKPREP_OK) goto out; cmd = scsi_get_cmd_from_req(sdev, req); if (unlikely(!cmd)) { ret = BLKPREP_DEFER; goto out; } ret = scsi_setup_cmnd(sdev, req); out: return scsi_prep_return(q, req, ret); } static void scsi_unprep_fn(struct request_queue *q, struct request *req) { scsi_uninit_cmd(req->special); } /* * scsi_dev_queue_ready: if we can send requests to sdev, return 1 else * return 0. * * Called with the queue_lock held. */ static inline int scsi_dev_queue_ready(struct request_queue *q, struct scsi_device *sdev) { unsigned int busy; busy = atomic_inc_return(&sdev->device_busy) - 1; if (atomic_read(&sdev->device_blocked)) { if (busy) goto out_dec; /* * unblock after device_blocked iterates to zero */ if (atomic_dec_return(&sdev->device_blocked) > 0) { /* * For the MQ case we take care of this in the caller. */ if (!q->mq_ops) blk_delay_queue(q, SCSI_QUEUE_DELAY); goto out_dec; } SCSI_LOG_MLQUEUE(3, sdev_printk(KERN_INFO, sdev, "unblocking device at zero depth\n")); } if (busy >= sdev->queue_depth) goto out_dec; return 1; out_dec: atomic_dec(&sdev->device_busy); return 0; } /* * scsi_target_queue_ready: checks if there we can send commands to target * @sdev: scsi device on starget to check. */ static inline int scsi_target_queue_ready(struct Scsi_Host *shost, struct scsi_device *sdev) { struct scsi_target *starget = scsi_target(sdev); unsigned int busy; if (starget->single_lun) { spin_lock_irq(shost->host_lock); if (starget->starget_sdev_user && starget->starget_sdev_user != sdev) { spin_unlock_irq(shost->host_lock); return 0; } starget->starget_sdev_user = sdev; spin_unlock_irq(shost->host_lock); } if (starget->can_queue <= 0) return 1; busy = atomic_inc_return(&starget->target_busy) - 1; if (atomic_read(&starget->target_blocked) > 0) { if (busy) goto starved; /* * unblock after target_blocked iterates to zero */ if (atomic_dec_return(&starget->target_blocked) > 0) goto out_dec; SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget, "unblocking target at zero depth\n")); } if (busy >= starget->can_queue) goto starved; return 1; starved: spin_lock_irq(shost->host_lock); list_move_tail(&sdev->starved_entry, &shost->starved_list); spin_unlock_irq(shost->host_lock); out_dec: if (starget->can_queue > 0) atomic_dec(&starget->target_busy); return 0; } /* * scsi_host_queue_ready: if we can send requests to shost, return 1 else * return 0. We must end up running the queue again whenever 0 is * returned, else IO can hang. */ static inline int scsi_host_queue_ready(struct request_queue *q, struct Scsi_Host *shost, struct scsi_device *sdev) { unsigned int busy; if (scsi_host_in_recovery(shost)) return 0; busy = atomic_inc_return(&shost->host_busy) - 1; if (atomic_read(&shost->host_blocked) > 0) { if (busy) goto starved; /* * unblock after host_blocked iterates to zero */ if (atomic_dec_return(&shost->host_blocked) > 0) goto out_dec; SCSI_LOG_MLQUEUE(3, shost_printk(KERN_INFO, shost, "unblocking host at zero depth\n")); } if (shost->can_queue > 0 && busy >= shost->can_queue) goto starved; if (shost->host_self_blocked) goto starved; /* We're OK to process the command, so we can't be starved */ if (!list_empty(&sdev->starved_entry)) { spin_lock_irq(shost->host_lock); if (!list_empty(&sdev->starved_entry)) list_del_init(&sdev->starved_entry); spin_unlock_irq(shost->host_lock); } return 1; starved: spin_lock_irq(shost->host_lock); if (list_empty(&sdev->starved_entry)) list_add_tail(&sdev->starved_entry, &shost->starved_list); spin_unlock_irq(shost->host_lock); out_dec: atomic_dec(&shost->host_busy); return 0; } /* * Busy state exporting function for request stacking drivers. * * For efficiency, no lock is taken to check the busy state of * shost/starget/sdev, since the returned value is not guaranteed and * may be changed after request stacking drivers call the function, * regardless of taking lock or not. * * When scsi can't dispatch I/Os anymore and needs to kill I/Os scsi * needs to return 'not busy'. Otherwise, request stacking drivers * may hold requests forever. */ static int scsi_lld_busy(struct request_queue *q) { struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost; if (blk_queue_dying(q)) return 0; shost = sdev->host; /* * Ignore host/starget busy state. * Since block layer does not have a concept of fairness across * multiple queues, congestion of host/starget needs to be handled * in SCSI layer. */ if (scsi_host_in_recovery(shost) || scsi_device_is_busy(sdev)) return 1; return 0; } /* * Kill a request for a dead device */ static void scsi_kill_request(struct request *req, struct request_queue *q) { struct scsi_cmnd *cmd = req->special; struct scsi_device *sdev; struct scsi_target *starget; struct Scsi_Host *shost; blk_start_request(req); scmd_printk(KERN_INFO, cmd, "killing request\n"); sdev = cmd->device; starget = scsi_target(sdev); shost = sdev->host; scsi_init_cmd_errh(cmd); cmd->result = DID_NO_CONNECT << 16; atomic_inc(&cmd->device->iorequest_cnt); /* * SCSI request completion path will do scsi_device_unbusy(), * bump busy counts. To bump the counters, we need to dance * with the locks as normal issue path does. */ atomic_inc(&sdev->device_busy); atomic_inc(&shost->host_busy); if (starget->can_queue > 0) atomic_inc(&starget->target_busy); blk_complete_request(req); } static void scsi_softirq_done(struct request *rq) { struct scsi_cmnd *cmd = rq->special; unsigned long wait_for = (cmd->allowed + 1) * rq->timeout; int disposition; INIT_LIST_HEAD(&cmd->eh_entry); atomic_inc(&cmd->device->iodone_cnt); if (cmd->result) atomic_inc(&cmd->device->ioerr_cnt); disposition = scsi_decide_disposition(cmd); if (disposition != SUCCESS && time_before(cmd->jiffies_at_alloc + wait_for, jiffies)) { sdev_printk(KERN_ERR, cmd->device, "timing out command, waited %lus\n", wait_for/HZ); disposition = SUCCESS; } scsi_log_completion(cmd, disposition); switch (disposition) { case SUCCESS: scsi_finish_command(cmd); break; case NEEDS_RETRY: scsi_queue_insert(cmd, SCSI_MLQUEUE_EH_RETRY); break; case ADD_TO_MLQUEUE: scsi_queue_insert(cmd, SCSI_MLQUEUE_DEVICE_BUSY); break; default: if (!scsi_eh_scmd_add(cmd, 0)) scsi_finish_command(cmd); } } /** * scsi_done - Invoke completion on finished SCSI command. * @cmd: The SCSI Command for which a low-level device driver (LLDD) gives * ownership back to SCSI Core -- i.e. the LLDD has finished with it. * * Description: This function is the mid-level's (SCSI Core) interrupt routine, * which regains ownership of the SCSI command (de facto) from a LLDD, and * calls blk_complete_request() for further processing. * * This function is interrupt context safe. */ static void scsi_done(struct scsi_cmnd *cmd) { trace_scsi_dispatch_cmd_done(cmd); blk_complete_request(cmd->request); } /* * Function: scsi_request_fn() * * Purpose: Main strategy routine for SCSI. * * Arguments: q - Pointer to actual queue. * * Returns: Nothing * * Lock status: IO request lock assumed to be held when called. */ static void scsi_request_fn(struct request_queue *q) __releases(q->queue_lock) __acquires(q->queue_lock) { struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost; struct scsi_cmnd *cmd; struct request *req; /* * To start with, we keep looping until the queue is empty, or until * the host is no longer able to accept any more requests. */ shost = sdev->host; for (;;) { int rtn; /* * get next queueable request. We do this early to make sure * that the request is fully prepared even if we cannot * accept it. */ req = blk_peek_request(q); if (!req) break; if (unlikely(!scsi_device_online(sdev))) { sdev_printk(KERN_ERR, sdev, "rejecting I/O to offline device\n"); scsi_kill_request(req, q); continue; } if (!scsi_dev_queue_ready(q, sdev)) break; /* * Remove the request from the request list. */ if (!(blk_queue_tagged(q) && !blk_queue_start_tag(q, req))) blk_start_request(req); spin_unlock_irq(q->queue_lock); cmd = req->special; if (unlikely(cmd == NULL)) { printk(KERN_CRIT "impossible request in %s.\n" "please mail a stack trace to " "linux-scsi@vger.kernel.org\n", __func__); blk_dump_rq_flags(req, "foo"); BUG(); } /* * We hit this when the driver is using a host wide * tag map. For device level tag maps the queue_depth check * in the device ready fn would prevent us from trying * to allocate a tag. Since the map is a shared host resource * we add the dev to the starved list so it eventually gets * a run when a tag is freed. */ if (blk_queue_tagged(q) && !blk_rq_tagged(req)) { spin_lock_irq(shost->host_lock); if (list_empty(&sdev->starved_entry)) list_add_tail(&sdev->starved_entry, &shost->starved_list); spin_unlock_irq(shost->host_lock); goto not_ready; } if (!scsi_target_queue_ready(shost, sdev)) goto not_ready; if (!scsi_host_queue_ready(q, shost, sdev)) goto host_not_ready; /* * Finally, initialize any error handling parameters, and set up * the timers for timeouts. */ scsi_init_cmd_errh(cmd); /* * Dispatch the command to the low-level driver. */ cmd->scsi_done = scsi_done; rtn = scsi_dispatch_cmd(cmd); if (rtn) { scsi_queue_insert(cmd, rtn); spin_lock_irq(q->queue_lock); goto out_delay; } spin_lock_irq(q->queue_lock); } return; host_not_ready: if (scsi_target(sdev)->can_queue > 0) atomic_dec(&scsi_target(sdev)->target_busy); not_ready: /* * lock q, handle tag, requeue req, and decrement device_busy. We * must return with queue_lock held. * * Decrementing device_busy without checking it is OK, as all such * cases (host limits or settings) should run the queue at some * later time. */ spin_lock_irq(q->queue_lock); blk_requeue_request(q, req); atomic_dec(&sdev->device_busy); out_delay: if (!atomic_read(&sdev->device_busy) && !scsi_device_blocked(sdev)) blk_delay_queue(q, SCSI_QUEUE_DELAY); } static inline int prep_to_mq(int ret) { switch (ret) { case BLKPREP_OK: return 0; case BLKPREP_DEFER: return BLK_MQ_RQ_QUEUE_BUSY; default: return BLK_MQ_RQ_QUEUE_ERROR; } } static int scsi_mq_prep_fn(struct request *req) { struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); struct scsi_device *sdev = req->q->queuedata; struct Scsi_Host *shost = sdev->host; unsigned char *sense_buf = cmd->sense_buffer; struct scatterlist *sg; memset(cmd, 0, sizeof(struct scsi_cmnd)); req->special = cmd; cmd->request = req; cmd->device = sdev; cmd->sense_buffer = sense_buf; cmd->tag = req->tag; cmd->cmnd = req->cmd; cmd->prot_op = SCSI_PROT_NORMAL; INIT_LIST_HEAD(&cmd->list); INIT_DELAYED_WORK(&cmd->abort_work, scmd_eh_abort_handler); cmd->jiffies_at_alloc = jiffies; if (shost->use_cmd_list) { spin_lock_irq(&sdev->list_lock); list_add_tail(&cmd->list, &sdev->cmd_list); spin_unlock_irq(&sdev->list_lock); } sg = (void *)cmd + sizeof(struct scsi_cmnd) + shost->hostt->cmd_size; cmd->sdb.table.sgl = sg; if (scsi_host_get_prot(shost)) { cmd->prot_sdb = (void *)sg + shost->sg_tablesize * sizeof(struct scatterlist); memset(cmd->prot_sdb, 0, sizeof(struct scsi_data_buffer)); cmd->prot_sdb->table.sgl = (struct scatterlist *)(cmd->prot_sdb + 1); } if (blk_bidi_rq(req)) { struct request *next_rq = req->next_rq; struct scsi_data_buffer *bidi_sdb = blk_mq_rq_to_pdu(next_rq); memset(bidi_sdb, 0, sizeof(struct scsi_data_buffer)); bidi_sdb->table.sgl = (struct scatterlist *)(bidi_sdb + 1); next_rq->special = bidi_sdb; } blk_mq_start_request(req); return scsi_setup_cmnd(sdev, req); } static void scsi_mq_done(struct scsi_cmnd *cmd) { trace_scsi_dispatch_cmd_done(cmd); blk_mq_complete_request(cmd->request); } static int scsi_queue_rq(struct blk_mq_hw_ctx *hctx, struct request *req, bool last) { struct request_queue *q = req->q; struct scsi_device *sdev = q->queuedata; struct Scsi_Host *shost = sdev->host; struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(req); int ret; int reason; ret = prep_to_mq(scsi_prep_state_check(sdev, req)); if (ret) goto out; ret = BLK_MQ_RQ_QUEUE_BUSY; if (!get_device(&sdev->sdev_gendev)) goto out; if (!scsi_dev_queue_ready(q, sdev)) goto out_put_device; if (!scsi_target_queue_ready(shost, sdev)) goto out_dec_device_busy; if (!scsi_host_queue_ready(q, shost, sdev)) goto out_dec_target_busy; if (!(req->cmd_flags & REQ_DONTPREP)) { ret = prep_to_mq(scsi_mq_prep_fn(req)); if (ret) goto out_dec_host_busy; req->cmd_flags |= REQ_DONTPREP; } else { blk_mq_start_request(req); } if (blk_queue_tagged(q)) req->cmd_flags |= REQ_QUEUED; else req->cmd_flags &= ~REQ_QUEUED; scsi_init_cmd_errh(cmd); cmd->scsi_done = scsi_mq_done; reason = scsi_dispatch_cmd(cmd); if (reason) { scsi_set_blocked(cmd, reason); ret = BLK_MQ_RQ_QUEUE_BUSY; goto out_dec_host_busy; } return BLK_MQ_RQ_QUEUE_OK; out_dec_host_busy: atomic_dec(&shost->host_busy); out_dec_target_busy: if (scsi_target(sdev)->can_queue > 0) atomic_dec(&scsi_target(sdev)->target_busy); out_dec_device_busy: atomic_dec(&sdev->device_busy); out_put_device: put_device(&sdev->sdev_gendev); out: switch (ret) { case BLK_MQ_RQ_QUEUE_BUSY: blk_mq_stop_hw_queue(hctx); if (atomic_read(&sdev->device_busy) == 0 && !scsi_device_blocked(sdev)) blk_mq_delay_queue(hctx, SCSI_QUEUE_DELAY); break; case BLK_MQ_RQ_QUEUE_ERROR: /* * Make sure to release all allocated ressources when * we hit an error, as we will never see this command * again. */ if (req->cmd_flags & REQ_DONTPREP) scsi_mq_uninit_cmd(cmd); break; default: break; } return ret; } static enum blk_eh_timer_return scsi_timeout(struct request *req, bool reserved) { if (reserved) return BLK_EH_RESET_TIMER; return scsi_times_out(req); } static int scsi_init_request(void *data, struct request *rq, unsigned int hctx_idx, unsigned int request_idx, unsigned int numa_node) { struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); cmd->sense_buffer = kzalloc_node(SCSI_SENSE_BUFFERSIZE, GFP_KERNEL, numa_node); if (!cmd->sense_buffer) return -ENOMEM; return 0; } static void scsi_exit_request(void *data, struct request *rq, unsigned int hctx_idx, unsigned int request_idx) { struct scsi_cmnd *cmd = blk_mq_rq_to_pdu(rq); kfree(cmd->sense_buffer); } static u64 scsi_calculate_bounce_limit(struct Scsi_Host *shost) { struct device *host_dev; u64 bounce_limit = 0xffffffff; if (shost->unchecked_isa_dma) return BLK_BOUNCE_ISA; /* * Platforms with virtual-DMA translation * hardware have no practical limit. */ if (!PCI_DMA_BUS_IS_PHYS) return BLK_BOUNCE_ANY; host_dev = scsi_get_device(shost); if (host_dev && host_dev->dma_mask) bounce_limit = (u64)dma_max_pfn(host_dev) << PAGE_SHIFT; return bounce_limit; } static void __scsi_init_queue(struct Scsi_Host *shost, struct request_queue *q) { struct device *dev = shost->dma_dev; /* * this limit is imposed by hardware restrictions */ blk_queue_max_segments(q, min_t(unsigned short, shost->sg_tablesize, SCSI_MAX_SG_CHAIN_SEGMENTS)); if (scsi_host_prot_dma(shost)) { shost->sg_prot_tablesize = min_not_zero(shost->sg_prot_tablesize, (unsigned short)SCSI_MAX_PROT_SG_SEGMENTS); BUG_ON(shost->sg_prot_tablesize < shost->sg_tablesize); blk_queue_max_integrity_segments(q, shost->sg_prot_tablesize); } blk_queue_max_hw_sectors(q, shost->max_sectors); blk_queue_bounce_limit(q, scsi_calculate_bounce_limit(shost)); blk_queue_segment_boundary(q, shost->dma_boundary); dma_set_seg_boundary(dev, shost->dma_boundary); blk_queue_max_segment_size(q, dma_get_max_seg_size(dev)); if (!shost->use_clustering) q->limits.cluster = 0; /* * set a reasonable default alignment on word boundaries: the * host and device may alter it using * blk_queue_update_dma_alignment() later. */ blk_queue_dma_alignment(q, 0x03); } struct request_queue *__scsi_alloc_queue(struct Scsi_Host *shost, request_fn_proc *request_fn) { struct request_queue *q; q = blk_init_queue(request_fn, NULL); if (!q) return NULL; __scsi_init_queue(shost, q); return q; } EXPORT_SYMBOL(__scsi_alloc_queue); struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) { struct request_queue *q; q = __scsi_alloc_queue(sdev->host, scsi_request_fn); if (!q) return NULL; blk_queue_prep_rq(q, scsi_prep_fn); blk_queue_unprep_rq(q, scsi_unprep_fn); blk_queue_softirq_done(q, scsi_softirq_done); blk_queue_rq_timed_out(q, scsi_times_out); blk_queue_lld_busy(q, scsi_lld_busy); return q; } static struct blk_mq_ops scsi_mq_ops = { .map_queue = blk_mq_map_queue, .queue_rq = scsi_queue_rq, .complete = scsi_softirq_done, .timeout = scsi_timeout, .init_request = scsi_init_request, .exit_request = scsi_exit_request, }; struct request_queue *scsi_mq_alloc_queue(struct scsi_device *sdev) { sdev->request_queue = blk_mq_init_queue(&sdev->host->tag_set); if (IS_ERR(sdev->request_queue)) return NULL; sdev->request_queue->queuedata = sdev; __scsi_init_queue(sdev->host, sdev->request_queue); return sdev->request_queue; } int scsi_mq_setup_tags(struct Scsi_Host *shost) { unsigned int cmd_size, sgl_size, tbl_size; tbl_size = shost->sg_tablesize; if (tbl_size > SCSI_MAX_SG_SEGMENTS) tbl_size = SCSI_MAX_SG_SEGMENTS; sgl_size = tbl_size * sizeof(struct scatterlist); cmd_size = sizeof(struct scsi_cmnd) + shost->hostt->cmd_size + sgl_size; if (scsi_host_get_prot(shost)) cmd_size += sizeof(struct scsi_data_buffer) + sgl_size; memset(&shost->tag_set, 0, sizeof(shost->tag_set)); shost->tag_set.ops = &scsi_mq_ops; shost->tag_set.nr_hw_queues = 1; shost->tag_set.queue_depth = shost->can_queue; shost->tag_set.cmd_size = cmd_size; shost->tag_set.numa_node = NUMA_NO_NODE; shost->tag_set.flags = BLK_MQ_F_SHOULD_MERGE | BLK_MQ_F_SG_MERGE; shost->tag_set.driver_data = shost; return blk_mq_alloc_tag_set(&shost->tag_set); } void scsi_mq_destroy_tags(struct Scsi_Host *shost) { blk_mq_free_tag_set(&shost->tag_set); } /* * Function: scsi_block_requests() * * Purpose: Utility function used by low-level drivers to prevent further * commands from being queued to the device. * * Arguments: shost - Host in question * * Returns: Nothing * * Lock status: No locks are assumed held. * * Notes: There is no timer nor any other means by which the requests * get unblocked other than the low-level driver calling * scsi_unblock_requests(). */ void scsi_block_requests(struct Scsi_Host *shost) { shost->host_self_blocked = 1; } EXPORT_SYMBOL(scsi_block_requests); /* * Function: scsi_unblock_requests() * * Purpose: Utility function used by low-level drivers to allow further * commands from being queued to the device. * * Arguments: shost - Host in question * * Returns: Nothing * * Lock status: No locks are assumed held. * * Notes: There is no timer nor any other means by which the requests * get unblocked other than the low-level driver calling * scsi_unblock_requests(). * * This is done as an API function so that changes to the * internals of the scsi mid-layer won't require wholesale * changes to drivers that use this feature. */ void scsi_unblock_requests(struct Scsi_Host *shost) { shost->host_self_blocked = 0; scsi_run_host_queues(shost); } EXPORT_SYMBOL(scsi_unblock_requests); int __init scsi_init_queue(void) { int i; scsi_sdb_cache = kmem_cache_create("scsi_data_buffer", sizeof(struct scsi_data_buffer), 0, 0, NULL); if (!scsi_sdb_cache) { printk(KERN_ERR "SCSI: can't init scsi sdb cache\n"); return -ENOMEM; } for (i = 0; i < SG_MEMPOOL_NR; i++) { struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; int size = sgp->size * sizeof(struct scatterlist); sgp->slab = kmem_cache_create(sgp->name, size, 0, SLAB_HWCACHE_ALIGN, NULL); if (!sgp->slab) { printk(KERN_ERR "SCSI: can't init sg slab %s\n", sgp->name); goto cleanup_sdb; } sgp->pool = mempool_create_slab_pool(SG_MEMPOOL_SIZE, sgp->slab); if (!sgp->pool) { printk(KERN_ERR "SCSI: can't init sg mempool %s\n", sgp->name); goto cleanup_sdb; } } return 0; cleanup_sdb: for (i = 0; i < SG_MEMPOOL_NR; i++) { struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; if (sgp->pool) mempool_destroy(sgp->pool); if (sgp->slab) kmem_cache_destroy(sgp->slab); } kmem_cache_destroy(scsi_sdb_cache); return -ENOMEM; } void scsi_exit_queue(void) { int i; kmem_cache_destroy(scsi_sdb_cache); for (i = 0; i < SG_MEMPOOL_NR; i++) { struct scsi_host_sg_pool *sgp = scsi_sg_pools + i; mempool_destroy(sgp->pool); kmem_cache_destroy(sgp->slab); } } /** * scsi_mode_select - issue a mode select * @sdev: SCSI device to be queried * @pf: Page format bit (1 == standard, 0 == vendor specific) * @sp: Save page bit (0 == don't save, 1 == save) * @modepage: mode page being requested * @buffer: request buffer (may not be smaller than eight bytes) * @len: length of request buffer. * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if successful; negative error number or scsi * status on error * */ int scsi_mode_select(struct scsi_device *sdev, int pf, int sp, int modepage, unsigned char *buffer, int len, int timeout, int retries, struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr) { unsigned char cmd[10]; unsigned char *real_buffer; int ret; memset(cmd, 0, sizeof(cmd)); cmd[1] = (pf ? 0x10 : 0) | (sp ? 0x01 : 0); if (sdev->use_10_for_ms) { if (len > 65535) return -EINVAL; real_buffer = kmalloc(8 + len, GFP_KERNEL); if (!real_buffer) return -ENOMEM; memcpy(real_buffer + 8, buffer, len); len += 8; real_buffer[0] = 0; real_buffer[1] = 0; real_buffer[2] = data->medium_type; real_buffer[3] = data->device_specific; real_buffer[4] = data->longlba ? 0x01 : 0; real_buffer[5] = 0; real_buffer[6] = data->block_descriptor_length >> 8; real_buffer[7] = data->block_descriptor_length; cmd[0] = MODE_SELECT_10; cmd[7] = len >> 8; cmd[8] = len; } else { if (len > 255 || data->block_descriptor_length > 255 || data->longlba) return -EINVAL; real_buffer = kmalloc(4 + len, GFP_KERNEL); if (!real_buffer) return -ENOMEM; memcpy(real_buffer + 4, buffer, len); len += 4; real_buffer[0] = 0; real_buffer[1] = data->medium_type; real_buffer[2] = data->device_specific; real_buffer[3] = data->block_descriptor_length; cmd[0] = MODE_SELECT; cmd[4] = len; } ret = scsi_execute_req(sdev, cmd, DMA_TO_DEVICE, real_buffer, len, sshdr, timeout, retries, NULL); kfree(real_buffer); return ret; } EXPORT_SYMBOL_GPL(scsi_mode_select); /** * scsi_mode_sense - issue a mode sense, falling back from 10 to six bytes if necessary. * @sdev: SCSI device to be queried * @dbd: set if mode sense will allow block descriptors to be returned * @modepage: mode page being requested * @buffer: request buffer (may not be smaller than eight bytes) * @len: length of request buffer. * @timeout: command timeout * @retries: number of retries before failing * @data: returns a structure abstracting the mode header data * @sshdr: place to put sense data (or NULL if no sense to be collected). * must be SCSI_SENSE_BUFFERSIZE big. * * Returns zero if unsuccessful, or the header offset (either 4 * or 8 depending on whether a six or ten byte command was * issued) if successful. */ int scsi_mode_sense(struct scsi_device *sdev, int dbd, int modepage, unsigned char *buffer, int len, int timeout, int retries, struct scsi_mode_data *data, struct scsi_sense_hdr *sshdr) { unsigned char cmd[12]; int use_10_for_ms; int header_length; int result; struct scsi_sense_hdr my_sshdr; memset(data, 0, sizeof(*data)); memset(&cmd[0], 0, 12); cmd[1] = dbd & 0x18; /* allows DBD and LLBA bits */ cmd[2] = modepage; /* caller might not be interested in sense, but we need it */ if (!sshdr) sshdr = &my_sshdr; retry: use_10_for_ms = sdev->use_10_for_ms; if (use_10_for_ms) { if (len < 8) len = 8; cmd[0] = MODE_SENSE_10; cmd[8] = len; header_length = 8; } else { if (len < 4) len = 4; cmd[0] = MODE_SENSE; cmd[4] = len; header_length = 4; } memset(buffer, 0, len); result = scsi_execute_req(sdev, cmd, DMA_FROM_DEVICE, buffer, len, sshdr, timeout, retries, NULL); /* This code looks awful: what it's doing is making sure an * ILLEGAL REQUEST sense return identifies the actual command * byte as the problem. MODE_SENSE commands can return * ILLEGAL REQUEST if the code page isn't supported */ if (use_10_for_ms && !scsi_status_is_good(result) && (driver_byte(result) & DRIVER_SENSE)) { if (scsi_sense_valid(sshdr)) { if ((sshdr->sense_key == ILLEGAL_REQUEST) && (sshdr->asc == 0x20) && (sshdr->ascq == 0)) { /* * Invalid command operation code */ sdev->use_10_for_ms = 0; goto retry; } } } if(scsi_status_is_good(result)) { if (unlikely(buffer[0] == 0x86 && buffer[1] == 0x0b && (modepage == 6 || modepage == 8))) { /* Initio breakage? */ header_length = 0; data->length = 13; data->medium_type = 0; data->device_specific = 0; data->longlba = 0; data->block_descriptor_length = 0; } else if(use_10_for_ms) { data->length = buffer[0]*256 + buffer[1] + 2; data->medium_type = buffer[2]; data->device_specific = buffer[3]; data->longlba = buffer[4] & 0x01; data->block_descriptor_length = buffer[6]*256 + buffer[7]; } else { data->length = buffer[0] + 1; data->medium_type = buffer[1]; data->device_specific = buffer[2]; data->block_descriptor_length = buffer[3]; } data->header_length = header_length; } return result; } EXPORT_SYMBOL(scsi_mode_sense); /** * scsi_test_unit_ready - test if unit is ready * @sdev: scsi device to change the state of. * @timeout: command timeout * @retries: number of retries before failing * @sshdr_external: Optional pointer to struct scsi_sense_hdr for * returning sense. Make sure that this is cleared before passing * in. * * Returns zero if unsuccessful or an error if TUR failed. For * removable media, UNIT_ATTENTION sets ->changed flag. **/ int scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, struct scsi_sense_hdr *sshdr_external) { char cmd[] = { TEST_UNIT_READY, 0, 0, 0, 0, 0, }; struct scsi_sense_hdr *sshdr; int result; if (!sshdr_external) sshdr = kzalloc(sizeof(*sshdr), GFP_KERNEL); else sshdr = sshdr_external; /* try to eat the UNIT_ATTENTION if there are enough retries */ do { result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, timeout, retries, NULL); if (sdev->removable && scsi_sense_valid(sshdr) && sshdr->sense_key == UNIT_ATTENTION) sdev->changed = 1; } while (scsi_sense_valid(sshdr) && sshdr->sense_key == UNIT_ATTENTION && --retries); if (!sshdr_external) kfree(sshdr); return result; } EXPORT_SYMBOL(scsi_test_unit_ready); /** * scsi_device_set_state - Take the given device through the device state model. * @sdev: scsi device to change the state of. * @state: state to change to. * * Returns zero if unsuccessful or an error if the requested * transition is illegal. */ int scsi_device_set_state(struct scsi_device *sdev, enum scsi_device_state state) { enum scsi_device_state oldstate = sdev->sdev_state; if (state == oldstate) return 0; switch (state) { case SDEV_CREATED: switch (oldstate) { case SDEV_CREATED_BLOCK: break; default: goto illegal; } break; case SDEV_RUNNING: switch (oldstate) { case SDEV_CREATED: case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: case SDEV_QUIESCE: case SDEV_BLOCK: break; default: goto illegal; } break; case SDEV_QUIESCE: switch (oldstate) { case SDEV_RUNNING: case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: break; default: goto illegal; } break; case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: switch (oldstate) { case SDEV_CREATED: case SDEV_RUNNING: case SDEV_QUIESCE: case SDEV_BLOCK: break; default: goto illegal; } break; case SDEV_BLOCK: switch (oldstate) { case SDEV_RUNNING: case SDEV_CREATED_BLOCK: break; default: goto illegal; } break; case SDEV_CREATED_BLOCK: switch (oldstate) { case SDEV_CREATED: break; default: goto illegal; } break; case SDEV_CANCEL: switch (oldstate) { case SDEV_CREATED: case SDEV_RUNNING: case SDEV_QUIESCE: case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: case SDEV_BLOCK: break; default: goto illegal; } break; case SDEV_DEL: switch (oldstate) { case SDEV_CREATED: case SDEV_RUNNING: case SDEV_OFFLINE: case SDEV_TRANSPORT_OFFLINE: case SDEV_CANCEL: case SDEV_CREATED_BLOCK: break; default: goto illegal; } break; } sdev->sdev_state = state; return 0; illegal: SCSI_LOG_ERROR_RECOVERY(1, sdev_printk(KERN_ERR, sdev, "Illegal state transition %s->%s", scsi_device_state_name(oldstate), scsi_device_state_name(state)) ); return -EINVAL; } EXPORT_SYMBOL(scsi_device_set_state); /** * sdev_evt_emit - emit a single SCSI device uevent * @sdev: associated SCSI device * @evt: event to emit * * Send a single uevent (scsi_event) to the associated scsi_device. */ static void scsi_evt_emit(struct scsi_device *sdev, struct scsi_event *evt) { int idx = 0; char *envp[3]; switch (evt->evt_type) { case SDEV_EVT_MEDIA_CHANGE: envp[idx++] = "SDEV_MEDIA_CHANGE=1"; break; case SDEV_EVT_INQUIRY_CHANGE_REPORTED: envp[idx++] = "SDEV_UA=INQUIRY_DATA_HAS_CHANGED"; break; case SDEV_EVT_CAPACITY_CHANGE_REPORTED: envp[idx++] = "SDEV_UA=CAPACITY_DATA_HAS_CHANGED"; break; case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED: envp[idx++] = "SDEV_UA=THIN_PROVISIONING_SOFT_THRESHOLD_REACHED"; break; case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED: envp[idx++] = "SDEV_UA=MODE_PARAMETERS_CHANGED"; break; case SDEV_EVT_LUN_CHANGE_REPORTED: envp[idx++] = "SDEV_UA=REPORTED_LUNS_DATA_HAS_CHANGED"; break; default: /* do nothing */ break; } envp[idx++] = NULL; kobject_uevent_env(&sdev->sdev_gendev.kobj, KOBJ_CHANGE, envp); } /** * sdev_evt_thread - send a uevent for each scsi event * @work: work struct for scsi_device * * Dispatch queued events to their associated scsi_device kobjects * as uevents. */ void scsi_evt_thread(struct work_struct *work) { struct scsi_device *sdev; enum scsi_device_event evt_type; LIST_HEAD(event_list); sdev = container_of(work, struct scsi_device, event_work); for (evt_type = SDEV_EVT_FIRST; evt_type <= SDEV_EVT_LAST; evt_type++) if (test_and_clear_bit(evt_type, sdev->pending_events)) sdev_evt_send_simple(sdev, evt_type, GFP_KERNEL); while (1) { struct scsi_event *evt; struct list_head *this, *tmp; unsigned long flags; spin_lock_irqsave(&sdev->list_lock, flags); list_splice_init(&sdev->event_list, &event_list); spin_unlock_irqrestore(&sdev->list_lock, flags); if (list_empty(&event_list)) break; list_for_each_safe(this, tmp, &event_list) { evt = list_entry(this, struct scsi_event, node); list_del(&evt->node); scsi_evt_emit(sdev, evt); kfree(evt); } } } /** * sdev_evt_send - send asserted event to uevent thread * @sdev: scsi_device event occurred on * @evt: event to send * * Assert scsi device event asynchronously. */ void sdev_evt_send(struct scsi_device *sdev, struct scsi_event *evt) { unsigned long flags; #if 0 /* FIXME: currently this check eliminates all media change events * for polled devices. Need to update to discriminate between AN * and polled events */ if (!test_bit(evt->evt_type, sdev->supported_events)) { kfree(evt); return; } #endif spin_lock_irqsave(&sdev->list_lock, flags); list_add_tail(&evt->node, &sdev->event_list); schedule_work(&sdev->event_work); spin_unlock_irqrestore(&sdev->list_lock, flags); } EXPORT_SYMBOL_GPL(sdev_evt_send); /** * sdev_evt_alloc - allocate a new scsi event * @evt_type: type of event to allocate * @gfpflags: GFP flags for allocation * * Allocates and returns a new scsi_event. */ struct scsi_event *sdev_evt_alloc(enum scsi_device_event evt_type, gfp_t gfpflags) { struct scsi_event *evt = kzalloc(sizeof(struct scsi_event), gfpflags); if (!evt) return NULL; evt->evt_type = evt_type; INIT_LIST_HEAD(&evt->node); /* evt_type-specific initialization, if any */ switch (evt_type) { case SDEV_EVT_MEDIA_CHANGE: case SDEV_EVT_INQUIRY_CHANGE_REPORTED: case SDEV_EVT_CAPACITY_CHANGE_REPORTED: case SDEV_EVT_SOFT_THRESHOLD_REACHED_REPORTED: case SDEV_EVT_MODE_PARAMETER_CHANGE_REPORTED: case SDEV_EVT_LUN_CHANGE_REPORTED: default: /* do nothing */ break; } return evt; } EXPORT_SYMBOL_GPL(sdev_evt_alloc); /** * sdev_evt_send_simple - send asserted event to uevent thread * @sdev: scsi_device event occurred on * @evt_type: type of event to send * @gfpflags: GFP flags for allocation * * Assert scsi device event asynchronously, given an event type. */ void sdev_evt_send_simple(struct scsi_device *sdev, enum scsi_device_event evt_type, gfp_t gfpflags) { struct scsi_event *evt = sdev_evt_alloc(evt_type, gfpflags); if (!evt) { sdev_printk(KERN_ERR, sdev, "event %d eaten due to OOM\n", evt_type); return; } sdev_evt_send(sdev, evt); } EXPORT_SYMBOL_GPL(sdev_evt_send_simple); /** * scsi_device_quiesce - Block user issued commands. * @sdev: scsi device to quiesce. * * This works by trying to transition to the SDEV_QUIESCE state * (which must be a legal transition). When the device is in this * state, only special requests will be accepted, all others will * be deferred. Since special requests may also be requeued requests, * a successful return doesn't guarantee the device will be * totally quiescent. * * Must be called with user context, may sleep. * * Returns zero if unsuccessful or an error if not. */ int scsi_device_quiesce(struct scsi_device *sdev) { int err = scsi_device_set_state(sdev, SDEV_QUIESCE); if (err) return err; scsi_run_queue(sdev->request_queue); while (atomic_read(&sdev->device_busy)) { msleep_interruptible(200); scsi_run_queue(sdev->request_queue); } return 0; } EXPORT_SYMBOL(scsi_device_quiesce); /** * scsi_device_resume - Restart user issued commands to a quiesced device. * @sdev: scsi device to resume. * * Moves the device from quiesced back to running and restarts the * queues. * * Must be called with user context, may sleep. */ void scsi_device_resume(struct scsi_device *sdev) { /* check if the device state was mutated prior to resume, and if * so assume the state is being managed elsewhere (for example * device deleted during suspend) */ if (sdev->sdev_state != SDEV_QUIESCE || scsi_device_set_state(sdev, SDEV_RUNNING)) return; scsi_run_queue(sdev->request_queue); } EXPORT_SYMBOL(scsi_device_resume); static void device_quiesce_fn(struct scsi_device *sdev, void *data) { scsi_device_quiesce(sdev); } void scsi_target_quiesce(struct scsi_target *starget) { starget_for_each_device(starget, NULL, device_quiesce_fn); } EXPORT_SYMBOL(scsi_target_quiesce); static void device_resume_fn(struct scsi_device *sdev, void *data) { scsi_device_resume(sdev); } void scsi_target_resume(struct scsi_target *starget) { starget_for_each_device(starget, NULL, device_resume_fn); } EXPORT_SYMBOL(scsi_target_resume); /** * scsi_internal_device_block - internal function to put a device temporarily into the SDEV_BLOCK state * @sdev: device to block * * Block request made by scsi lld's to temporarily stop all * scsi commands on the specified device. Called from interrupt * or normal process context. * * Returns zero if successful or error if not * * Notes: * This routine transitions the device to the SDEV_BLOCK state * (which must be a legal transition). When the device is in this * state, all commands are deferred until the scsi lld reenables * the device with scsi_device_unblock or device_block_tmo fires. */ int scsi_internal_device_block(struct scsi_device *sdev) { struct request_queue *q = sdev->request_queue; unsigned long flags; int err = 0; err = scsi_device_set_state(sdev, SDEV_BLOCK); if (err) { err = scsi_device_set_state(sdev, SDEV_CREATED_BLOCK); if (err) return err; } /* * The device has transitioned to SDEV_BLOCK. Stop the * block layer from calling the midlayer with this device's * request queue. */ if (q->mq_ops) { blk_mq_stop_hw_queues(q); } else { spin_lock_irqsave(q->queue_lock, flags); blk_stop_queue(q); spin_unlock_irqrestore(q->queue_lock, flags); } return 0; } EXPORT_SYMBOL_GPL(scsi_internal_device_block); /** * scsi_internal_device_unblock - resume a device after a block request * @sdev: device to resume * @new_state: state to set devices to after unblocking * * Called by scsi lld's or the midlayer to restart the device queue * for the previously suspended scsi device. Called from interrupt or * normal process context. * * Returns zero if successful or error if not. * * Notes: * This routine transitions the device to the SDEV_RUNNING state * or to one of the offline states (which must be a legal transition) * allowing the midlayer to goose the queue for this device. */ int scsi_internal_device_unblock(struct scsi_device *sdev, enum scsi_device_state new_state) { struct request_queue *q = sdev->request_queue; unsigned long flags; /* * Try to transition the scsi device to SDEV_RUNNING or one of the * offlined states and goose the device queue if successful. */ if ((sdev->sdev_state == SDEV_BLOCK) || (sdev->sdev_state == SDEV_TRANSPORT_OFFLINE)) sdev->sdev_state = new_state; else if (sdev->sdev_state == SDEV_CREATED_BLOCK) { if (new_state == SDEV_TRANSPORT_OFFLINE || new_state == SDEV_OFFLINE) sdev->sdev_state = new_state; else sdev->sdev_state = SDEV_CREATED; } else if (sdev->sdev_state != SDEV_CANCEL && sdev->sdev_state != SDEV_OFFLINE) return -EINVAL; if (q->mq_ops) { blk_mq_start_stopped_hw_queues(q, false); } else { spin_lock_irqsave(q->queue_lock, flags); blk_start_queue(q); spin_unlock_irqrestore(q->queue_lock, flags); } return 0; } EXPORT_SYMBOL_GPL(scsi_internal_device_unblock); static void device_block(struct scsi_device *sdev, void *data) { scsi_internal_device_block(sdev); } static int target_block(struct device *dev, void *data) { if (scsi_is_target_device(dev)) starget_for_each_device(to_scsi_target(dev), NULL, device_block); return 0; } void scsi_target_block(struct device *dev) { if (scsi_is_target_device(dev)) starget_for_each_device(to_scsi_target(dev), NULL, device_block); else device_for_each_child(dev, NULL, target_block); } EXPORT_SYMBOL_GPL(scsi_target_block); static void device_unblock(struct scsi_device *sdev, void *data) { scsi_internal_device_unblock(sdev, *(enum scsi_device_state *)data); } static int target_unblock(struct device *dev, void *data) { if (scsi_is_target_device(dev)) starget_for_each_device(to_scsi_target(dev), data, device_unblock); return 0; } void scsi_target_unblock(struct device *dev, enum scsi_device_state new_state) { if (scsi_is_target_device(dev)) starget_for_each_device(to_scsi_target(dev), &new_state, device_unblock); else device_for_each_child(dev, &new_state, target_unblock); } EXPORT_SYMBOL_GPL(scsi_target_unblock); /** * scsi_kmap_atomic_sg - find and atomically map an sg-elemnt * @sgl: scatter-gather list * @sg_count: number of segments in sg * @offset: offset in bytes into sg, on return offset into the mapped area * @len: bytes to map, on return number of bytes mapped * * Returns virtual address of the start of the mapped page */ void *scsi_kmap_atomic_sg(struct scatterlist *sgl, int sg_count, size_t *offset, size_t *len) { int i; size_t sg_len = 0, len_complete = 0; struct scatterlist *sg; struct page *page; WARN_ON(!irqs_disabled()); for_each_sg(sgl, sg, sg_count, i) { len_complete = sg_len; /* Complete sg-entries */ sg_len += sg->length; if (sg_len > *offset) break; } if (unlikely(i == sg_count)) { printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, " "elements %d\n", __func__, sg_len, *offset, sg_count); WARN_ON(1); return NULL; } /* Offset starting from the beginning of first page in this sg-entry */ *offset = *offset - len_complete + sg->offset; /* Assumption: contiguous pages can be accessed as "page + i" */ page = nth_page(sg_page(sg), (*offset >> PAGE_SHIFT)); *offset &= ~PAGE_MASK; /* Bytes in this sg-entry from *offset to the end of the page */ sg_len = PAGE_SIZE - *offset; if (*len > sg_len) *len = sg_len; return kmap_atomic(page); } EXPORT_SYMBOL(scsi_kmap_atomic_sg); /** * scsi_kunmap_atomic_sg - atomically unmap a virtual address, previously mapped with scsi_kmap_atomic_sg * @virt: virtual address to be unmapped */ void scsi_kunmap_atomic_sg(void *virt) { kunmap_atomic(virt); } EXPORT_SYMBOL(scsi_kunmap_atomic_sg); void sdev_disable_disk_events(struct scsi_device *sdev) { atomic_inc(&sdev->disk_events_disable_depth); } EXPORT_SYMBOL(sdev_disable_disk_events); void sdev_enable_disk_events(struct scsi_device *sdev) { if (WARN_ON_ONCE(atomic_read(&sdev->disk_events_disable_depth) <= 0)) return; atomic_dec(&sdev->disk_events_disable_depth); } EXPORT_SYMBOL(sdev_enable_disk_events);