/* * Support for the interrupt controllers found on Power Macintosh, * currently Apple's "Grand Central" interrupt controller in all * it's incarnations. OpenPIC support used on newer machines is * in a separate file * * Copyright (C) 1997 Paul Mackerras (paulus@samba.org) * * Maintained by Benjamin Herrenschmidt (benh@kernel.crashing.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include "pmac_pic.h" /* * XXX this should be in xmon.h, but putting it there means xmon.h * has to include (to get irqreturn_t), which * causes all sorts of problems. -- paulus */ extern irqreturn_t xmon_irq(int, void *, struct pt_regs *); struct pmac_irq_hw { unsigned int event; unsigned int enable; unsigned int ack; unsigned int level; }; /* Default addresses */ static volatile struct pmac_irq_hw *pmac_irq_hw[4] = { (struct pmac_irq_hw *) 0xf3000020, (struct pmac_irq_hw *) 0xf3000010, (struct pmac_irq_hw *) 0xf4000020, (struct pmac_irq_hw *) 0xf4000010, }; #define GC_LEVEL_MASK 0x3ff00000 #define OHARE_LEVEL_MASK 0x1ff00000 #define HEATHROW_LEVEL_MASK 0x1ff00000 static int max_irqs; static int max_real_irqs; static u32 level_mask[4]; static DEFINE_SPINLOCK(pmac_pic_lock); #define GATWICK_IRQ_POOL_SIZE 10 static struct interrupt_info gatwick_int_pool[GATWICK_IRQ_POOL_SIZE]; /* * Mark an irq as "lost". This is only used on the pmac * since it can lose interrupts (see pmac_set_irq_mask). * -- Cort */ void __set_lost(unsigned long irq_nr, int nokick) { if (!test_and_set_bit(irq_nr, ppc_lost_interrupts)) { atomic_inc(&ppc_n_lost_interrupts); if (!nokick) set_dec(1); } } static void pmac_mask_and_ack_irq(unsigned int irq_nr) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; unsigned long flags; if ((unsigned)irq_nr >= max_irqs) return; clear_bit(irq_nr, ppc_cached_irq_mask); if (test_and_clear_bit(irq_nr, ppc_lost_interrupts)) atomic_dec(&ppc_n_lost_interrupts); spin_lock_irqsave(&pmac_pic_lock, flags); out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); out_le32(&pmac_irq_hw[i]->ack, bit); do { /* make sure ack gets to controller before we enable interrupts */ mb(); } while((in_le32(&pmac_irq_hw[i]->enable) & bit) != (ppc_cached_irq_mask[i] & bit)); spin_unlock_irqrestore(&pmac_pic_lock, flags); } static void pmac_set_irq_mask(unsigned int irq_nr, int nokicklost) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; unsigned long flags; if ((unsigned)irq_nr >= max_irqs) return; spin_lock_irqsave(&pmac_pic_lock, flags); /* enable unmasked interrupts */ out_le32(&pmac_irq_hw[i]->enable, ppc_cached_irq_mask[i]); do { /* make sure mask gets to controller before we return to user */ mb(); } while((in_le32(&pmac_irq_hw[i]->enable) & bit) != (ppc_cached_irq_mask[i] & bit)); /* * Unfortunately, setting the bit in the enable register * when the device interrupt is already on *doesn't* set * the bit in the flag register or request another interrupt. */ if (bit & ppc_cached_irq_mask[i] & in_le32(&pmac_irq_hw[i]->level)) __set_lost((ulong)irq_nr, nokicklost); spin_unlock_irqrestore(&pmac_pic_lock, flags); } /* When an irq gets requested for the first client, if it's an * edge interrupt, we clear any previous one on the controller */ static unsigned int pmac_startup_irq(unsigned int irq_nr) { unsigned long bit = 1UL << (irq_nr & 0x1f); int i = irq_nr >> 5; if ((irq_desc[irq_nr].status & IRQ_LEVEL) == 0) out_le32(&pmac_irq_hw[i]->ack, bit); set_bit(irq_nr, ppc_cached_irq_mask); pmac_set_irq_mask(irq_nr, 0); return 0; } static void pmac_mask_irq(unsigned int irq_nr) { clear_bit(irq_nr, ppc_cached_irq_mask); pmac_set_irq_mask(irq_nr, 0); mb(); } static void pmac_unmask_irq(unsigned int irq_nr) { set_bit(irq_nr, ppc_cached_irq_mask); pmac_set_irq_mask(irq_nr, 0); } static void pmac_end_irq(unsigned int irq_nr) { if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)) && irq_desc[irq_nr].action) { set_bit(irq_nr, ppc_cached_irq_mask); pmac_set_irq_mask(irq_nr, 1); } } struct hw_interrupt_type pmac_pic = { .typename = " PMAC-PIC ", .startup = pmac_startup_irq, .enable = pmac_unmask_irq, .disable = pmac_mask_irq, .ack = pmac_mask_and_ack_irq, .end = pmac_end_irq, }; struct hw_interrupt_type gatwick_pic = { .typename = " GATWICK ", .startup = pmac_startup_irq, .enable = pmac_unmask_irq, .disable = pmac_mask_irq, .ack = pmac_mask_and_ack_irq, .end = pmac_end_irq, }; static irqreturn_t gatwick_action(int cpl, void *dev_id, struct pt_regs *regs) { int irq, bits; for (irq = max_irqs; (irq -= 32) >= max_real_irqs; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; /* We must read level interrupts from the level register */ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; irq += __ilog2(bits); __do_IRQ(irq, regs); return IRQ_HANDLED; } printk("gatwick irq not from gatwick pic\n"); return IRQ_NONE; } int pmac_get_irq(struct pt_regs *regs) { int irq; unsigned long bits = 0; #ifdef CONFIG_SMP void psurge_smp_message_recv(struct pt_regs *); /* IPI's are a hack on the powersurge -- Cort */ if ( smp_processor_id() != 0 ) { psurge_smp_message_recv(regs); return -2; /* ignore, already handled */ } #endif /* CONFIG_SMP */ for (irq = max_real_irqs; (irq -= 32) >= 0; ) { int i = irq >> 5; bits = in_le32(&pmac_irq_hw[i]->event) | ppc_lost_interrupts[i]; /* We must read level interrupts from the level register */ bits |= (in_le32(&pmac_irq_hw[i]->level) & level_mask[i]); bits &= ppc_cached_irq_mask[i]; if (bits == 0) continue; irq += __ilog2(bits); break; } return irq; } /* This routine will fix some missing interrupt values in the device tree * on the gatwick mac-io controller used by some PowerBooks */ static void __init pmac_fix_gatwick_interrupts(struct device_node *gw, int irq_base) { struct device_node *node; int count; memset(gatwick_int_pool, 0, sizeof(gatwick_int_pool)); node = gw->child; count = 0; while(node) { /* Fix SCC */ if (strcasecmp(node->name, "escc") == 0) if (node->child) { if (node->child->n_intrs < 3) { node->child->intrs = &gatwick_int_pool[count]; count += 3; } node->child->n_intrs = 3; node->child->intrs[0].line = 15+irq_base; node->child->intrs[1].line = 4+irq_base; node->child->intrs[2].line = 5+irq_base; printk(KERN_INFO "irq: fixed SCC on second controller (%d,%d,%d)\n", node->child->intrs[0].line, node->child->intrs[1].line, node->child->intrs[2].line); } /* Fix media-bay & left SWIM */ if (strcasecmp(node->name, "media-bay") == 0) { struct device_node* ya_node; if (node->n_intrs == 0) node->intrs = &gatwick_int_pool[count++]; node->n_intrs = 1; node->intrs[0].line = 29+irq_base; printk(KERN_INFO "irq: fixed media-bay on second controller (%d)\n", node->intrs[0].line); ya_node = node->child; while(ya_node) { if (strcasecmp(ya_node->name, "floppy") == 0) { if (ya_node->n_intrs < 2) { ya_node->intrs = &gatwick_int_pool[count]; count += 2; } ya_node->n_intrs = 2; ya_node->intrs[0].line = 19+irq_base; ya_node->intrs[1].line = 1+irq_base; printk(KERN_INFO "irq: fixed floppy on second controller (%d,%d)\n", ya_node->intrs[0].line, ya_node->intrs[1].line); } if (strcasecmp(ya_node->name, "ata4") == 0) { if (ya_node->n_intrs < 2) { ya_node->intrs = &gatwick_int_pool[count]; count += 2; } ya_node->n_intrs = 2; ya_node->intrs[0].line = 14+irq_base; ya_node->intrs[1].line = 3+irq_base; printk(KERN_INFO "irq: fixed ide on second controller (%d,%d)\n", ya_node->intrs[0].line, ya_node->intrs[1].line); } ya_node = ya_node->sibling; } } node = node->sibling; } if (count > 10) { printk("WARNING !! Gatwick interrupt pool overflow\n"); printk(" GATWICK_IRQ_POOL_SIZE = %d\n", GATWICK_IRQ_POOL_SIZE); printk(" requested = %d\n", count); } } /* * The PowerBook 3400/2400/3500 can have a combo ethernet/modem * card which includes an ohare chip that acts as a second interrupt * controller. If we find this second ohare, set it up and fix the * interrupt value in the device tree for the ethernet chip. */ static int __init enable_second_ohare(void) { unsigned char bus, devfn; unsigned short cmd; unsigned long addr; struct device_node *irqctrler = find_devices("pci106b,7"); struct device_node *ether; if (irqctrler == NULL || irqctrler->n_addrs <= 0) return -1; addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); pmac_irq_hw[1] = (volatile struct pmac_irq_hw *)(addr + 0x20); max_irqs = 64; if (pci_device_from_OF_node(irqctrler, &bus, &devfn) == 0) { struct pci_controller* hose = pci_find_hose_for_OF_device(irqctrler); if (!hose) printk(KERN_ERR "Can't find PCI hose for OHare2 !\n"); else { early_read_config_word(hose, bus, devfn, PCI_COMMAND, &cmd); cmd |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; cmd &= ~PCI_COMMAND_IO; early_write_config_word(hose, bus, devfn, PCI_COMMAND, cmd); } } /* Fix interrupt for the modem/ethernet combo controller. The number in the device tree (27) is bogus (correct for the ethernet-only board but not the combo ethernet/modem board). The real interrupt is 28 on the second controller -> 28+32 = 60. */ ether = find_devices("pci1011,14"); if (ether && ether->n_intrs > 0) { ether->intrs[0].line = 60; printk(KERN_INFO "irq: Fixed ethernet IRQ to %d\n", ether->intrs[0].line); } /* Return the interrupt number of the cascade */ return irqctrler->intrs[0].line; } static int pmac_u3_cascade(struct pt_regs *regs, void *data) { return mpic_get_one_irq((struct mpic *)data, regs); } #ifdef CONFIG_XMON static struct irqaction xmon_action = { .handler = xmon_irq, .flags = 0, .mask = CPU_MASK_NONE, .name = "NMI - XMON" }; #endif static struct irqaction gatwick_cascade_action = { .handler = gatwick_action, .flags = SA_INTERRUPT, .mask = CPU_MASK_NONE, .name = "cascade", }; void __init pmac_pic_init(void) { int i; struct device_node *irqctrler = NULL; struct device_node *irqctrler2 = NULL; struct device_node *np; unsigned long addr; int irq_cascade = -1; struct mpic *mpic1, *mpic2; /* We first try to detect Apple's new Core99 chipset, since mac-io * is quite different on those machines and contains an IBM MPIC2. */ np = find_type_devices("open-pic"); while (np) { if (np->parent && !strcmp(np->parent->name, "u3")) irqctrler2 = np; else irqctrler = np; np = np->next; } if (irqctrler != NULL && irqctrler->n_addrs > 0) { unsigned char senses[128]; printk(KERN_INFO "PowerMac using OpenPIC irq controller at 0x%08x\n", (unsigned int)irqctrler->addrs[0].address); prom_get_irq_senses(senses, 0, 128); mpic1 = mpic_alloc(irqctrler->addrs[0].address, MPIC_PRIMARY | MPIC_WANTS_RESET, 0, 0, 128, 256, senses, 128, " K2-MPIC "); BUG_ON(mpic1 == NULL); mpic_init(mpic1); if (irqctrler2 != NULL && irqctrler2->n_intrs > 0 && irqctrler2->n_addrs > 0) { printk(KERN_INFO "Slave OpenPIC at 0x%08x hooked on IRQ %d\n", (u32)irqctrler2->addrs[0].address, irqctrler2->intrs[0].line); pmac_call_feature(PMAC_FTR_ENABLE_MPIC, irqctrler2, 0, 0); prom_get_irq_senses(senses, 128, 128 + 128); /* We don't need to set MPIC_BROKEN_U3 here since we don't have * hypertransport interrupts routed to it */ mpic2 = mpic_alloc(irqctrler2->addrs[0].address, MPIC_BIG_ENDIAN | MPIC_WANTS_RESET, 0, 128, 128, 0, senses, 128, " U3-MPIC "); BUG_ON(mpic2 == NULL); mpic_init(mpic2); mpic_setup_cascade(irqctrler2->intrs[0].line, pmac_u3_cascade, mpic2); } } /* Get the level/edge settings, assume if it's not * a Grand Central nor an OHare, then it's an Heathrow * (or Paddington). */ if (find_devices("gc")) level_mask[0] = GC_LEVEL_MASK; else if (find_devices("ohare")) { level_mask[0] = OHARE_LEVEL_MASK; /* We might have a second cascaded ohare */ level_mask[1] = OHARE_LEVEL_MASK; } else { level_mask[0] = HEATHROW_LEVEL_MASK; level_mask[1] = 0; /* We might have a second cascaded heathrow */ level_mask[2] = HEATHROW_LEVEL_MASK; level_mask[3] = 0; } /* * G3 powermacs and 1999 G3 PowerBooks have 64 interrupts, * 1998 G3 Series PowerBooks have 128, * other powermacs have 32. * The combo ethernet/modem card for the Powerstar powerbooks * (2400/3400/3500, ohare based) has a second ohare chip * effectively making a total of 64. */ max_irqs = max_real_irqs = 32; irqctrler = find_devices("mac-io"); if (irqctrler) { max_real_irqs = 64; if (irqctrler->next) max_irqs = 128; else max_irqs = 64; } for ( i = 0; i < max_real_irqs ; i++ ) irq_desc[i].handler = &pmac_pic; /* get addresses of first controller */ if (irqctrler) { if (irqctrler->n_addrs > 0) { addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); for (i = 0; i < 2; ++i) pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) (addr + (2 - i) * 0x10); } /* get addresses of second controller */ irqctrler = irqctrler->next; if (irqctrler && irqctrler->n_addrs > 0) { addr = (unsigned long) ioremap(irqctrler->addrs[0].address, 0x40); for (i = 2; i < 4; ++i) pmac_irq_hw[i] = (volatile struct pmac_irq_hw*) (addr + (4 - i) * 0x10); irq_cascade = irqctrler->intrs[0].line; if (device_is_compatible(irqctrler, "gatwick")) pmac_fix_gatwick_interrupts(irqctrler, max_real_irqs); } } else { /* older powermacs have a GC (grand central) or ohare at f3000000, with interrupt control registers at f3000020. */ addr = (unsigned long) ioremap(0xf3000000, 0x40); pmac_irq_hw[0] = (volatile struct pmac_irq_hw *) (addr + 0x20); } /* PowerBooks 3400 and 3500 can have a second controller in a second ohare chip, on the combo ethernet/modem card */ if (machine_is_compatible("AAPL,3400/2400") || machine_is_compatible("AAPL,3500")) irq_cascade = enable_second_ohare(); /* disable all interrupts in all controllers */ for (i = 0; i * 32 < max_irqs; ++i) out_le32(&pmac_irq_hw[i]->enable, 0); /* mark level interrupts */ for (i = 0; i < max_irqs; i++) if (level_mask[i >> 5] & (1UL << (i & 0x1f))) irq_desc[i].status = IRQ_LEVEL; /* get interrupt line of secondary interrupt controller */ if (irq_cascade >= 0) { printk(KERN_INFO "irq: secondary controller on irq %d\n", (int)irq_cascade); for ( i = max_real_irqs ; i < max_irqs ; i++ ) irq_desc[i].handler = &gatwick_pic; setup_irq(irq_cascade, &gatwick_cascade_action); } printk("System has %d possible interrupts\n", max_irqs); if (max_irqs != max_real_irqs) printk(KERN_DEBUG "%d interrupts on main controller\n", max_real_irqs); #ifdef CONFIG_XMON setup_irq(20, &xmon_action); #endif /* CONFIG_XMON */ } #ifdef CONFIG_PM /* * These procedures are used in implementing sleep on the powerbooks. * sleep_save_intrs() saves the states of all interrupt enables * and disables all interrupts except for the nominated one. * sleep_restore_intrs() restores the states of all interrupt enables. */ unsigned long sleep_save_mask[2]; /* This used to be passed by the PMU driver but that link got * broken with the new driver model. We use this tweak for now... */ static int pmacpic_find_viaint(void) { int viaint = -1; #ifdef CONFIG_ADB_PMU struct device_node *np; if (pmu_get_model() != PMU_OHARE_BASED) goto not_found; np = of_find_node_by_name(NULL, "via-pmu"); if (np == NULL) goto not_found; viaint = np->intrs[0].line; #endif /* CONFIG_ADB_PMU */ not_found: return viaint; } static int pmacpic_suspend(struct sys_device *sysdev, pm_message_t state) { int viaint = pmacpic_find_viaint(); sleep_save_mask[0] = ppc_cached_irq_mask[0]; sleep_save_mask[1] = ppc_cached_irq_mask[1]; ppc_cached_irq_mask[0] = 0; ppc_cached_irq_mask[1] = 0; if (viaint > 0) set_bit(viaint, ppc_cached_irq_mask); out_le32(&pmac_irq_hw[0]->enable, ppc_cached_irq_mask[0]); if (max_real_irqs > 32) out_le32(&pmac_irq_hw[1]->enable, ppc_cached_irq_mask[1]); (void)in_le32(&pmac_irq_hw[0]->event); /* make sure mask gets to controller before we return to caller */ mb(); (void)in_le32(&pmac_irq_hw[0]->enable); return 0; } static int pmacpic_resume(struct sys_device *sysdev) { int i; out_le32(&pmac_irq_hw[0]->enable, 0); if (max_real_irqs > 32) out_le32(&pmac_irq_hw[1]->enable, 0); mb(); for (i = 0; i < max_real_irqs; ++i) if (test_bit(i, sleep_save_mask)) pmac_unmask_irq(i); return 0; } #endif /* CONFIG_PM */ static struct sysdev_class pmacpic_sysclass = { set_kset_name("pmac_pic"), }; static struct sys_device device_pmacpic = { .id = 0, .cls = &pmacpic_sysclass, }; static struct sysdev_driver driver_pmacpic = { #ifdef CONFIG_PM .suspend = &pmacpic_suspend, .resume = &pmacpic_resume, #endif /* CONFIG_PM */ }; static int __init init_pmacpic_sysfs(void) { if (max_irqs == 0) return -ENODEV; printk(KERN_DEBUG "Registering pmac pic with sysfs...\n"); sysdev_class_register(&pmacpic_sysclass); sysdev_register(&device_pmacpic); sysdev_driver_register(&pmacpic_sysclass, &driver_pmacpic); return 0; } subsys_initcall(init_pmacpic_sysfs);