/* * Intel IO-APIC support for multi-Pentium hosts. * * Copyright (C) 1997, 1998, 1999, 2000, 2009 Ingo Molnar, Hajnalka Szabo * * Many thanks to Stig Venaas for trying out countless experimental * patches and reporting/debugging problems patiently! * * (c) 1999, Multiple IO-APIC support, developed by * Ken-ichi Yaku and * Hidemi Kishimoto , * further tested and cleaned up by Zach Brown * and Ingo Molnar * * Fixes * Maciej W. Rozycki : Bits for genuine 82489DX APICs; * thanks to Eric Gilmore * and Rolf G. Tews * for testing these extensively * Paul Diefenbaugh : Added full ACPI support */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* time_after() */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define for_each_ioapic(idx) \ for ((idx) = 0; (idx) < nr_ioapics; (idx)++) #define for_each_ioapic_reverse(idx) \ for ((idx) = nr_ioapics - 1; (idx) >= 0; (idx)--) #define for_each_pin(idx, pin) \ for ((pin) = 0; (pin) < ioapics[(idx)].nr_registers; (pin)++) #define for_each_ioapic_pin(idx, pin) \ for_each_ioapic((idx)) \ for_each_pin((idx), (pin)) #define for_each_irq_pin(entry, head) \ list_for_each_entry(entry, &head, list) /* * Is the SiS APIC rmw bug present ? * -1 = don't know, 0 = no, 1 = yes */ int sis_apic_bug = -1; static DEFINE_RAW_SPINLOCK(ioapic_lock); static DEFINE_MUTEX(ioapic_mutex); static unsigned int ioapic_dynirq_base; static int ioapic_initialized; struct mp_chip_data { struct IO_APIC_route_entry entry; int trigger; int polarity; bool isa_irq; }; struct mp_pin_info { int trigger; int polarity; int node; int set; u32 count; }; static struct ioapic { /* * # of IRQ routing registers */ int nr_registers; /* * Saved state during suspend/resume, or while enabling intr-remap. */ struct IO_APIC_route_entry *saved_registers; /* I/O APIC config */ struct mpc_ioapic mp_config; /* IO APIC gsi routing info */ struct mp_ioapic_gsi gsi_config; struct ioapic_domain_cfg irqdomain_cfg; struct irq_domain *irqdomain; struct mp_pin_info *pin_info; struct resource *iomem_res; } ioapics[MAX_IO_APICS]; #define mpc_ioapic_ver(ioapic_idx) ioapics[ioapic_idx].mp_config.apicver int mpc_ioapic_id(int ioapic_idx) { return ioapics[ioapic_idx].mp_config.apicid; } unsigned int mpc_ioapic_addr(int ioapic_idx) { return ioapics[ioapic_idx].mp_config.apicaddr; } struct mp_ioapic_gsi *mp_ioapic_gsi_routing(int ioapic_idx) { return &ioapics[ioapic_idx].gsi_config; } static inline int mp_ioapic_pin_count(int ioapic) { struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); return gsi_cfg->gsi_end - gsi_cfg->gsi_base + 1; } u32 mp_pin_to_gsi(int ioapic, int pin) { return mp_ioapic_gsi_routing(ioapic)->gsi_base + pin; } /* * Initialize all legacy IRQs and all pins on the first IOAPIC * if we have legacy interrupt controller. Kernel boot option "pirq=" * may rely on non-legacy pins on the first IOAPIC. */ static inline int mp_init_irq_at_boot(int ioapic, int irq) { if (!nr_legacy_irqs()) return 0; return ioapic == 0 || (irq >= 0 && irq < nr_legacy_irqs()); } static inline struct mp_pin_info *mp_pin_info(int ioapic_idx, int pin) { return ioapics[ioapic_idx].pin_info + pin; } static inline struct irq_domain *mp_ioapic_irqdomain(int ioapic) { return ioapics[ioapic].irqdomain; } int nr_ioapics; /* The one past the highest gsi number used */ u32 gsi_top; /* MP IRQ source entries */ struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; #ifdef CONFIG_EISA int mp_bus_id_to_type[MAX_MP_BUSSES]; #endif DECLARE_BITMAP(mp_bus_not_pci, MAX_MP_BUSSES); int skip_ioapic_setup; /** * disable_ioapic_support() - disables ioapic support at runtime */ void disable_ioapic_support(void) { #ifdef CONFIG_PCI noioapicquirk = 1; noioapicreroute = -1; #endif skip_ioapic_setup = 1; } static int __init parse_noapic(char *str) { /* disable IO-APIC */ disable_ioapic_support(); return 0; } early_param("noapic", parse_noapic); /* Will be called in mpparse/acpi/sfi codes for saving IRQ info */ void mp_save_irq(struct mpc_intsrc *m) { int i; apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbus, m->srcbusirq, m->dstapic, m->dstirq); for (i = 0; i < mp_irq_entries; i++) { if (!memcmp(&mp_irqs[i], m, sizeof(*m))) return; } memcpy(&mp_irqs[mp_irq_entries], m, sizeof(*m)); if (++mp_irq_entries == MAX_IRQ_SOURCES) panic("Max # of irq sources exceeded!!\n"); } struct irq_pin_list { struct list_head list; int apic, pin; }; static struct irq_pin_list *alloc_irq_pin_list(int node) { return kzalloc_node(sizeof(struct irq_pin_list), GFP_KERNEL, node); } static void alloc_ioapic_saved_registers(int idx) { size_t size; if (ioapics[idx].saved_registers) return; size = sizeof(struct IO_APIC_route_entry) * ioapics[idx].nr_registers; ioapics[idx].saved_registers = kzalloc(size, GFP_KERNEL); if (!ioapics[idx].saved_registers) pr_err("IOAPIC %d: suspend/resume impossible!\n", idx); } static void free_ioapic_saved_registers(int idx) { kfree(ioapics[idx].saved_registers); ioapics[idx].saved_registers = NULL; } int __init arch_early_ioapic_init(void) { int i; if (!nr_legacy_irqs()) io_apic_irqs = ~0UL; for_each_ioapic(i) alloc_ioapic_saved_registers(i); return 0; } struct io_apic { unsigned int index; unsigned int unused[3]; unsigned int data; unsigned int unused2[11]; unsigned int eoi; }; static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) + (mpc_ioapic_addr(idx) & ~PAGE_MASK); } void io_apic_eoi(unsigned int apic, unsigned int vector) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(vector, &io_apic->eoi); } unsigned int native_io_apic_read(unsigned int apic, unsigned int reg) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(reg, &io_apic->index); return readl(&io_apic->data); } void native_io_apic_write(unsigned int apic, unsigned int reg, unsigned int value) { struct io_apic __iomem *io_apic = io_apic_base(apic); writel(reg, &io_apic->index); writel(value, &io_apic->data); } /* * Re-write a value: to be used for read-modify-write * cycles where the read already set up the index register. * * Older SiS APIC requires we rewrite the index register */ void native_io_apic_modify(unsigned int apic, unsigned int reg, unsigned int value) { struct io_apic __iomem *io_apic = io_apic_base(apic); if (sis_apic_bug) writel(reg, &io_apic->index); writel(value, &io_apic->data); } union entry_union { struct { u32 w1, w2; }; struct IO_APIC_route_entry entry; }; static struct IO_APIC_route_entry __ioapic_read_entry(int apic, int pin) { union entry_union eu; eu.w1 = io_apic_read(apic, 0x10 + 2 * pin); eu.w2 = io_apic_read(apic, 0x11 + 2 * pin); return eu.entry; } static struct IO_APIC_route_entry ioapic_read_entry(int apic, int pin) { union entry_union eu; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); eu.entry = __ioapic_read_entry(apic, pin); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return eu.entry; } /* * When we write a new IO APIC routing entry, we need to write the high * word first! If the mask bit in the low word is clear, we will enable * the interrupt, and we need to make sure the entry is fully populated * before that happens. */ static void __ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { union entry_union eu = {{0, 0}}; eu.entry = e; io_apic_write(apic, 0x11 + 2*pin, eu.w2); io_apic_write(apic, 0x10 + 2*pin, eu.w1); } static void ioapic_write_entry(int apic, int pin, struct IO_APIC_route_entry e) { unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); __ioapic_write_entry(apic, pin, e); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * When we mask an IO APIC routing entry, we need to write the low * word first, in order to set the mask bit before we change the * high bits! */ static void ioapic_mask_entry(int apic, int pin) { unsigned long flags; union entry_union eu = { .entry.mask = 1 }; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0x10 + 2*pin, eu.w1); io_apic_write(apic, 0x11 + 2*pin, eu.w2); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * The common case is 1:1 IRQ<->pin mappings. Sometimes there are * shared ISA-space IRQs, so we have to support them. We are super * fast in the common case, and fast for shared ISA-space IRQs. */ static int __add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { struct irq_pin_list *entry; /* don't allow duplicates */ for_each_irq_pin(entry, cfg->irq_2_pin) if (entry->apic == apic && entry->pin == pin) return 0; entry = alloc_irq_pin_list(node); if (!entry) { pr_err("can not alloc irq_pin_list (%d,%d,%d)\n", node, apic, pin); return -ENOMEM; } entry->apic = apic; entry->pin = pin; list_add_tail(&entry->list, &cfg->irq_2_pin); return 0; } static void __remove_pin_from_irq(struct irq_cfg *cfg, int apic, int pin) { struct irq_pin_list *tmp, *entry; list_for_each_entry_safe(entry, tmp, &cfg->irq_2_pin, list) if (entry->apic == apic && entry->pin == pin) { list_del(&entry->list); kfree(entry); return; } } static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin) { if (__add_pin_to_irq_node(cfg, node, apic, pin)) panic("IO-APIC: failed to add irq-pin. Can not proceed\n"); } /* * Reroute an IRQ to a different pin. */ static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node, int oldapic, int oldpin, int newapic, int newpin) { struct irq_pin_list *entry; for_each_irq_pin(entry, cfg->irq_2_pin) { if (entry->apic == oldapic && entry->pin == oldpin) { entry->apic = newapic; entry->pin = newpin; /* every one is different, right? */ return; } } /* old apic/pin didn't exist, so just add new ones */ add_pin_to_irq_node(cfg, node, newapic, newpin); } static void __io_apic_modify_irq(struct irq_pin_list *entry, int mask_and, int mask_or, void (*final)(struct irq_pin_list *entry)) { unsigned int reg, pin; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin * 2); reg &= mask_and; reg |= mask_or; io_apic_modify(entry->apic, 0x10 + pin * 2, reg); if (final) final(entry); } static void io_apic_modify_irq(struct irq_cfg *cfg, int mask_and, int mask_or, void (*final)(struct irq_pin_list *entry)) { struct irq_pin_list *entry; for_each_irq_pin(entry, cfg->irq_2_pin) __io_apic_modify_irq(entry, mask_and, mask_or, final); } static void io_apic_sync(struct irq_pin_list *entry) { /* * Synchronize the IO-APIC and the CPU by doing * a dummy read from the IO-APIC */ struct io_apic __iomem *io_apic; io_apic = io_apic_base(entry->apic); readl(&io_apic->data); } static void mask_ioapic(struct irq_cfg *cfg) { unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_modify_irq(cfg, ~0, IO_APIC_REDIR_MASKED, &io_apic_sync); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void mask_ioapic_irq(struct irq_data *data) { mask_ioapic(irqd_cfg(data)); } static void __unmask_ioapic(struct irq_cfg *cfg) { io_apic_modify_irq(cfg, ~IO_APIC_REDIR_MASKED, 0, NULL); } static void unmask_ioapic(struct irq_cfg *cfg) { unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); __unmask_ioapic(cfg); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void unmask_ioapic_irq(struct irq_data *data) { unmask_ioapic(irqd_cfg(data)); } /* * IO-APIC versions below 0x20 don't support EOI register. * For the record, here is the information about various versions: * 0Xh 82489DX * 1Xh I/OAPIC or I/O(x)APIC which are not PCI 2.2 Compliant * 2Xh I/O(x)APIC which is PCI 2.2 Compliant * 30h-FFh Reserved * * Some of the Intel ICH Specs (ICH2 to ICH5) documents the io-apic * version as 0x2. This is an error with documentation and these ICH chips * use io-apic's of version 0x20. * * For IO-APIC's with EOI register, we use that to do an explicit EOI. * Otherwise, we simulate the EOI message manually by changing the trigger * mode to edge and then back to level, with RTE being masked during this. */ void native_eoi_ioapic_pin(int apic, int pin, int vector) { if (mpc_ioapic_ver(apic) >= 0x20) { io_apic_eoi(apic, vector); } else { struct IO_APIC_route_entry entry, entry1; entry = entry1 = __ioapic_read_entry(apic, pin); /* * Mask the entry and change the trigger mode to edge. */ entry1.mask = 1; entry1.trigger = IOAPIC_EDGE; __ioapic_write_entry(apic, pin, entry1); /* * Restore the previous level triggered entry. */ __ioapic_write_entry(apic, pin, entry); } } void eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg) { struct irq_pin_list *entry; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, cfg->irq_2_pin) x86_io_apic_ops.eoi_ioapic_pin(entry->apic, entry->pin, cfg->vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) { struct IO_APIC_route_entry entry; /* Check delivery_mode to be sure we're not clearing an SMI pin */ entry = ioapic_read_entry(apic, pin); if (entry.delivery_mode == dest_SMI) return; /* * Make sure the entry is masked and re-read the contents to check * if it is a level triggered pin and if the remote-IRR is set. */ if (!entry.mask) { entry.mask = 1; ioapic_write_entry(apic, pin, entry); entry = ioapic_read_entry(apic, pin); } if (entry.irr) { unsigned long flags; /* * Make sure the trigger mode is set to level. Explicit EOI * doesn't clear the remote-IRR if the trigger mode is not * set to level. */ if (!entry.trigger) { entry.trigger = IOAPIC_LEVEL; ioapic_write_entry(apic, pin, entry); } raw_spin_lock_irqsave(&ioapic_lock, flags); x86_io_apic_ops.eoi_ioapic_pin(apic, pin, entry.vector); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } /* * Clear the rest of the bits in the IO-APIC RTE except for the mask * bit. */ ioapic_mask_entry(apic, pin); entry = ioapic_read_entry(apic, pin); if (entry.irr) pr_err("Unable to reset IRR for apic: %d, pin :%d\n", mpc_ioapic_id(apic), pin); } static void clear_IO_APIC (void) { int apic, pin; for_each_ioapic_pin(apic, pin) clear_IO_APIC_pin(apic, pin); } #ifdef CONFIG_X86_32 /* * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to * specific CPU-side IRQs. */ #define MAX_PIRQS 8 static int pirq_entries[MAX_PIRQS] = { [0 ... MAX_PIRQS - 1] = -1 }; static int __init ioapic_pirq_setup(char *str) { int i, max; int ints[MAX_PIRQS+1]; get_options(str, ARRAY_SIZE(ints), ints); apic_printk(APIC_VERBOSE, KERN_INFO "PIRQ redirection, working around broken MP-BIOS.\n"); max = MAX_PIRQS; if (ints[0] < MAX_PIRQS) max = ints[0]; for (i = 0; i < max; i++) { apic_printk(APIC_VERBOSE, KERN_DEBUG "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); /* * PIRQs are mapped upside down, usually. */ pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; } return 1; } __setup("pirq=", ioapic_pirq_setup); #endif /* CONFIG_X86_32 */ /* * Saves all the IO-APIC RTE's */ int save_ioapic_entries(void) { int apic, pin; int err = 0; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) { err = -ENOMEM; continue; } for_each_pin(apic, pin) ioapics[apic].saved_registers[pin] = ioapic_read_entry(apic, pin); } return err; } /* * Mask all IO APIC entries. */ void mask_ioapic_entries(void) { int apic, pin; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) continue; for_each_pin(apic, pin) { struct IO_APIC_route_entry entry; entry = ioapics[apic].saved_registers[pin]; if (!entry.mask) { entry.mask = 1; ioapic_write_entry(apic, pin, entry); } } } } /* * Restore IO APIC entries which was saved in the ioapic structure. */ int restore_ioapic_entries(void) { int apic, pin; for_each_ioapic(apic) { if (!ioapics[apic].saved_registers) continue; for_each_pin(apic, pin) ioapic_write_entry(apic, pin, ioapics[apic].saved_registers[pin]); } return 0; } /* * Find the IRQ entry number of a certain pin. */ static int find_irq_entry(int ioapic_idx, int pin, int type) { int i; for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].irqtype == type && (mp_irqs[i].dstapic == mpc_ioapic_id(ioapic_idx) || mp_irqs[i].dstapic == MP_APIC_ALL) && mp_irqs[i].dstirq == pin) return i; return -1; } /* * Find the pin to which IRQ[irq] (ISA) is connected */ static int __init find_isa_irq_pin(int irq, int type) { int i; for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && (mp_irqs[i].srcbusirq == irq)) return mp_irqs[i].dstirq; } return -1; } static int __init find_isa_irq_apic(int irq, int type) { int i; for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && (mp_irqs[i].irqtype == type) && (mp_irqs[i].srcbusirq == irq)) break; } if (i < mp_irq_entries) { int ioapic_idx; for_each_ioapic(ioapic_idx) if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic) return ioapic_idx; } return -1; } #ifdef CONFIG_EISA /* * EISA Edge/Level control register, ELCR */ static int EISA_ELCR(unsigned int irq) { if (irq < nr_legacy_irqs()) { unsigned int port = 0x4d0 + (irq >> 3); return (inb(port) >> (irq & 7)) & 1; } apic_printk(APIC_VERBOSE, KERN_INFO "Broken MPtable reports ISA irq %d\n", irq); return 0; } #endif /* ISA interrupts are always polarity zero edge triggered, * when listed as conforming in the MP table. */ #define default_ISA_trigger(idx) (0) #define default_ISA_polarity(idx) (0) /* EISA interrupts are always polarity zero and can be edge or level * trigger depending on the ELCR value. If an interrupt is listed as * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, * when listed as conforming in the MP table. */ #define default_PCI_trigger(idx) (1) #define default_PCI_polarity(idx) (1) static int irq_polarity(int idx) { int bus = mp_irqs[idx].srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ switch (mp_irqs[idx].irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) polarity = default_ISA_polarity(idx); else polarity = default_PCI_polarity(idx); break; case 1: /* high active */ { polarity = 0; break; } case 2: /* reserved */ { pr_warn("broken BIOS!!\n"); polarity = 1; break; } case 3: /* low active */ { polarity = 1; break; } default: /* invalid */ { pr_warn("broken BIOS!!\n"); polarity = 1; break; } } return polarity; } static int irq_trigger(int idx) { int bus = mp_irqs[idx].srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ switch ((mp_irqs[idx].irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) trigger = default_ISA_trigger(idx); else trigger = default_PCI_trigger(idx); #ifdef CONFIG_EISA switch (mp_bus_id_to_type[bus]) { case MP_BUS_ISA: /* ISA pin */ { /* set before the switch */ break; } case MP_BUS_EISA: /* EISA pin */ { trigger = default_EISA_trigger(idx); break; } case MP_BUS_PCI: /* PCI pin */ { /* set before the switch */ break; } default: { pr_warn("broken BIOS!!\n"); trigger = 1; break; } } #endif break; case 1: /* edge */ { trigger = 0; break; } case 2: /* reserved */ { pr_warn("broken BIOS!!\n"); trigger = 1; break; } case 3: /* level */ { trigger = 1; break; } default: /* invalid */ { pr_warn("broken BIOS!!\n"); trigger = 0; break; } } return trigger; } void ioapic_set_alloc_attr(struct irq_alloc_info *info, int node, int trigger, int polarity) { init_irq_alloc_info(info, NULL); info->type = X86_IRQ_ALLOC_TYPE_IOAPIC; info->ioapic_node = node; info->ioapic_trigger = trigger; info->ioapic_polarity = polarity; info->ioapic_valid = 1; } static void mp_register_handler(unsigned int irq, unsigned long trigger) { irq_flow_handler_t hdl; bool fasteoi; if (trigger) { irq_set_status_flags(irq, IRQ_LEVEL); fasteoi = true; } else { irq_clear_status_flags(irq, IRQ_LEVEL); fasteoi = false; } hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; __irq_set_handler(irq, hdl, 0, fasteoi ? "fasteoi" : "edge"); } static int alloc_irq_from_domain(struct irq_domain *domain, u32 gsi, int pin, struct irq_alloc_info *info) { int irq = -1; int ioapic = mp_irqdomain_ioapic_idx(domain); int type = ioapics[ioapic].irqdomain_cfg.type; switch (type) { case IOAPIC_DOMAIN_LEGACY: /* * Dynamically allocate IRQ number for non-ISA IRQs in the first 16 * GSIs on some weird platforms. */ if (gsi < nr_legacy_irqs()) irq = irq_create_mapping(domain, pin); else if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0) irq = gsi; break; case IOAPIC_DOMAIN_STRICT: if (irq_create_strict_mappings(domain, gsi, pin, 1) == 0) irq = gsi; break; case IOAPIC_DOMAIN_DYNAMIC: irq = irq_create_mapping(domain, pin); break; default: WARN(1, "ioapic: unknown irqdomain type %d\n", type); break; } return irq > 0 ? irq : -1; } static int mp_map_pin_to_irq(u32 gsi, int idx, int ioapic, int pin, unsigned int flags, struct irq_alloc_info *info) { int irq; struct irq_domain *domain = mp_ioapic_irqdomain(ioapic); struct mp_pin_info *pinfo = mp_pin_info(ioapic, pin); if (!domain) return -1; mutex_lock(&ioapic_mutex); /* * Don't use irqdomain to manage ISA IRQs because there may be * multiple IOAPIC pins sharing the same ISA IRQ number and * irqdomain only supports 1:1 mapping between IOAPIC pin and * IRQ number. A typical IOAPIC has 24 pins, pin 0-15 are used * for legacy IRQs and pin 16-23 are used for PCI IRQs (PIRQ A-H). * When ACPI is disabled, only legacy IRQ numbers (IRQ0-15) are * available, and some BIOSes may use MP Interrupt Source records * to override IRQ numbers for PIRQs instead of reprogramming * the interrupt routing logic. Thus there may be multiple pins * sharing the same legacy IRQ number when ACPI is disabled. */ if (idx >= 0 && test_bit(mp_irqs[idx].srcbus, mp_bus_not_pci)) { irq = mp_irqs[idx].srcbusirq; if (flags & IOAPIC_MAP_ALLOC) { if (pinfo->count == 0 && mp_irqdomain_map(domain, irq, pin) != 0) irq = -1; /* special handling for timer IRQ0 */ if (irq == 0) pinfo->count++; } } else { irq = irq_find_mapping(domain, pin); if (irq <= 0 && (flags & IOAPIC_MAP_ALLOC)) irq = alloc_irq_from_domain(domain, gsi, pin, info); } if (flags & IOAPIC_MAP_ALLOC) { /* special handling for legacy IRQs */ if (irq < nr_legacy_irqs() && pinfo->count == 1 && mp_irqdomain_map(domain, irq, pin) != 0) irq = -1; if (irq > 0) pinfo->count++; else if (pinfo->count == 0) pinfo->set = 0; } mutex_unlock(&ioapic_mutex); return irq > 0 ? irq : -1; } static int pin_2_irq(int idx, int ioapic, int pin, unsigned int flags) { u32 gsi = mp_pin_to_gsi(ioapic, pin); /* * Debugging check, we are in big trouble if this message pops up! */ if (mp_irqs[idx].dstirq != pin) pr_err("broken BIOS or MPTABLE parser, ayiee!!\n"); #ifdef CONFIG_X86_32 /* * PCI IRQ command line redirection. Yes, limits are hardcoded. */ if ((pin >= 16) && (pin <= 23)) { if (pirq_entries[pin-16] != -1) { if (!pirq_entries[pin-16]) { apic_printk(APIC_VERBOSE, KERN_DEBUG "disabling PIRQ%d\n", pin-16); } else { int irq = pirq_entries[pin-16]; apic_printk(APIC_VERBOSE, KERN_DEBUG "using PIRQ%d -> IRQ %d\n", pin-16, irq); return irq; } } } #endif return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, NULL); } int mp_map_gsi_to_irq(u32 gsi, unsigned int flags, struct irq_alloc_info *info) { int ioapic, pin, idx; ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return -1; pin = mp_find_ioapic_pin(ioapic, gsi); idx = find_irq_entry(ioapic, pin, mp_INT); if ((flags & IOAPIC_MAP_CHECK) && idx < 0) return -1; return mp_map_pin_to_irq(gsi, idx, ioapic, pin, flags, info); } void mp_unmap_irq(int irq) { struct irq_data *data = irq_get_irq_data(irq); struct mp_pin_info *info; int ioapic, pin; if (!data || !data->domain) return; ioapic = (int)(long)data->domain->host_data; pin = (int)data->hwirq; info = mp_pin_info(ioapic, pin); mutex_lock(&ioapic_mutex); if (--info->count == 0) { info->set = 0; if (irq < nr_legacy_irqs() && ioapics[ioapic].irqdomain_cfg.type == IOAPIC_DOMAIN_LEGACY) mp_irqdomain_unmap(data->domain, irq); else irq_dispose_mapping(irq); } mutex_unlock(&ioapic_mutex); } /* * Find a specific PCI IRQ entry. * Not an __init, possibly needed by modules */ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) { int irq, i, best_ioapic = -1, best_idx = -1; apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n", bus, slot, pin); if (test_bit(bus, mp_bus_not_pci)) { apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus); return -1; } for (i = 0; i < mp_irq_entries; i++) { int lbus = mp_irqs[i].srcbus; int ioapic_idx, found = 0; if (bus != lbus || mp_irqs[i].irqtype != mp_INT || slot != ((mp_irqs[i].srcbusirq >> 2) & 0x1f)) continue; for_each_ioapic(ioapic_idx) if (mpc_ioapic_id(ioapic_idx) == mp_irqs[i].dstapic || mp_irqs[i].dstapic == MP_APIC_ALL) { found = 1; break; } if (!found) continue; /* Skip ISA IRQs */ irq = pin_2_irq(i, ioapic_idx, mp_irqs[i].dstirq, 0); if (irq > 0 && !IO_APIC_IRQ(irq)) continue; if (pin == (mp_irqs[i].srcbusirq & 3)) { best_idx = i; best_ioapic = ioapic_idx; goto out; } /* * Use the first all-but-pin matching entry as a * best-guess fuzzy result for broken mptables. */ if (best_idx < 0) { best_idx = i; best_ioapic = ioapic_idx; } } if (best_idx < 0) return -1; out: return pin_2_irq(best_idx, best_ioapic, mp_irqs[best_idx].dstirq, IOAPIC_MAP_ALLOC); } EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); static struct irq_chip ioapic_chip; #ifdef CONFIG_X86_32 static inline int IO_APIC_irq_trigger(int irq) { int apic, idx, pin; for_each_ioapic_pin(apic, pin) { idx = find_irq_entry(apic, pin, mp_INT); if ((idx != -1) && (irq == pin_2_irq(idx, apic, pin, 0))) return irq_trigger(idx); } /* * nonexistent IRQs are edge default */ return 0; } #else static inline int IO_APIC_irq_trigger(int irq) { return 1; } #endif static void ioapic_register_intr(unsigned int irq, struct irq_cfg *cfg, unsigned long trigger) { struct irq_chip *chip = &ioapic_chip; irq_flow_handler_t hdl; bool fasteoi; if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || trigger == IOAPIC_LEVEL) { irq_set_status_flags(irq, IRQ_LEVEL); fasteoi = true; } else { irq_clear_status_flags(irq, IRQ_LEVEL); fasteoi = false; } if (setup_remapped_irq(irq, cfg, chip)) fasteoi = trigger != 0; hdl = fasteoi ? handle_fasteoi_irq : handle_edge_irq; irq_set_chip_and_handler_name(irq, chip, hdl, fasteoi ? "fasteoi" : "edge"); } int native_setup_ioapic_entry(int irq, struct IO_APIC_route_entry *entry, unsigned int destination, int vector, struct io_apic_irq_attr *attr) { memset(entry, 0, sizeof(*entry)); entry->delivery_mode = apic->irq_delivery_mode; entry->dest_mode = apic->irq_dest_mode; entry->dest = destination; entry->vector = vector; entry->mask = 0; /* enable IRQ */ entry->trigger = attr->trigger; entry->polarity = attr->polarity; /* * Mask level triggered irqs. * Use IRQ_DELAYED_DISABLE for edge triggered irqs. */ if (attr->trigger) entry->mask = 1; return 0; } static void setup_ioapic_irq(unsigned int irq, struct irq_cfg *cfg, struct io_apic_irq_attr *attr) { struct IO_APIC_route_entry entry; unsigned int dest; if (!IO_APIC_IRQ(irq)) return; if (assign_irq_vector(irq, cfg, apic->target_cpus())) return; if (apic->cpu_mask_to_apicid_and(cfg->domain, apic->target_cpus(), &dest)) { pr_warn("Failed to obtain apicid for ioapic %d, pin %d\n", mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); clear_irq_vector(irq, cfg); return; } apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i Dest:%d)\n", attr->ioapic, mpc_ioapic_id(attr->ioapic), attr->ioapic_pin, cfg->vector, irq, attr->trigger, attr->polarity, dest); if (x86_io_apic_ops.setup_entry(irq, &entry, dest, cfg->vector, attr)) { pr_warn("Failed to setup ioapic entry for ioapic %d, pin %d\n", mpc_ioapic_id(attr->ioapic), attr->ioapic_pin); clear_irq_vector(irq, cfg); return; } ioapic_register_intr(irq, cfg, attr->trigger); if (irq < nr_legacy_irqs()) legacy_pic->mask(irq); ioapic_write_entry(attr->ioapic, attr->ioapic_pin, entry); } static void __init setup_IO_APIC_irqs(void) { unsigned int ioapic, pin; int idx; apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); for_each_ioapic_pin(ioapic, pin) { idx = find_irq_entry(ioapic, pin, mp_INT); if (idx < 0) apic_printk(APIC_VERBOSE, KERN_DEBUG " apic %d pin %d not connected\n", mpc_ioapic_id(ioapic), pin); else pin_2_irq(idx, ioapic, pin, ioapic ? 0 : IOAPIC_MAP_ALLOC); } } /* * Set up the timer pin, possibly with the 8259A-master behind. */ static void __init setup_timer_IRQ0_pin(unsigned int ioapic_idx, unsigned int pin, int vector) { struct IO_APIC_route_entry entry; unsigned int dest; memset(&entry, 0, sizeof(entry)); /* * We use logical delivery to get the timer IRQ * to the first CPU. */ if (unlikely(apic->cpu_mask_to_apicid_and(apic->target_cpus(), apic->target_cpus(), &dest))) dest = BAD_APICID; entry.dest_mode = apic->irq_dest_mode; entry.mask = 0; /* don't mask IRQ for edge */ entry.dest = dest; entry.delivery_mode = apic->irq_delivery_mode; entry.polarity = 0; entry.trigger = 0; entry.vector = vector; /* * The timer IRQ doesn't have to know that behind the * scene we may have a 8259A-master in AEOI mode ... */ irq_set_chip_and_handler_name(0, &ioapic_chip, handle_edge_irq, "edge"); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(ioapic_idx, pin, entry); } void native_io_apic_print_entries(unsigned int apic, unsigned int nr_entries) { int i; pr_debug(" NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect:\n"); for (i = 0; i <= nr_entries; i++) { struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); pr_debug(" %02x %02X ", i, entry.dest); pr_cont("%1d %1d %1d %1d %1d " "%1d %1d %02X\n", entry.mask, entry.trigger, entry.irr, entry.polarity, entry.delivery_status, entry.dest_mode, entry.delivery_mode, entry.vector); } } void intel_ir_io_apic_print_entries(unsigned int apic, unsigned int nr_entries) { int i; pr_debug(" NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect:\n"); for (i = 0; i <= nr_entries; i++) { struct IR_IO_APIC_route_entry *ir_entry; struct IO_APIC_route_entry entry; entry = ioapic_read_entry(apic, i); ir_entry = (struct IR_IO_APIC_route_entry *)&entry; pr_debug(" %02x %04X ", i, ir_entry->index); pr_cont("%1d %1d %1d %1d %1d " "%1d %1d %X %02X\n", ir_entry->format, ir_entry->mask, ir_entry->trigger, ir_entry->irr, ir_entry->polarity, ir_entry->delivery_status, ir_entry->index2, ir_entry->zero, ir_entry->vector); } } void ioapic_zap_locks(void) { raw_spin_lock_init(&ioapic_lock); } static void __init print_IO_APIC(int ioapic_idx) { union IO_APIC_reg_00 reg_00; union IO_APIC_reg_01 reg_01; union IO_APIC_reg_02 reg_02; union IO_APIC_reg_03 reg_03; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); reg_01.raw = io_apic_read(ioapic_idx, 1); if (reg_01.bits.version >= 0x10) reg_02.raw = io_apic_read(ioapic_idx, 2); if (reg_01.bits.version >= 0x20) reg_03.raw = io_apic_read(ioapic_idx, 3); raw_spin_unlock_irqrestore(&ioapic_lock, flags); printk(KERN_DEBUG "IO APIC #%d......\n", mpc_ioapic_id(ioapic_idx)); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); printk(KERN_DEBUG ".... register #01: %08X\n", *(int *)®_01); printk(KERN_DEBUG "....... : max redirection entries: %02X\n", reg_01.bits.entries); printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); printk(KERN_DEBUG "....... : IO APIC version: %02X\n", reg_01.bits.version); /* * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, * but the value of reg_02 is read as the previous read register * value, so ignore it if reg_02 == reg_01. */ if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); } /* * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 * or reg_03, but the value of reg_0[23] is read as the previous read * register value, so ignore it if reg_03 == reg_0[12]. */ if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && reg_03.raw != reg_01.raw) { printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); } printk(KERN_DEBUG ".... IRQ redirection table:\n"); x86_io_apic_ops.print_entries(ioapic_idx, reg_01.bits.entries); } void __init print_IO_APICs(void) { int ioapic_idx; struct irq_cfg *cfg; unsigned int irq; struct irq_chip *chip; printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for_each_ioapic(ioapic_idx) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", mpc_ioapic_id(ioapic_idx), ioapics[ioapic_idx].nr_registers); /* * We are a bit conservative about what we expect. We have to * know about every hardware change ASAP. */ printk(KERN_INFO "testing the IO APIC.......................\n"); for_each_ioapic(ioapic_idx) print_IO_APIC(ioapic_idx); printk(KERN_DEBUG "IRQ to pin mappings:\n"); for_each_active_irq(irq) { struct irq_pin_list *entry; chip = irq_get_chip(irq); if (chip != &ioapic_chip) continue; cfg = irq_cfg(irq); if (!cfg) continue; if (list_empty(&cfg->irq_2_pin)) continue; printk(KERN_DEBUG "IRQ%d ", irq); for_each_irq_pin(entry, cfg->irq_2_pin) pr_cont("-> %d:%d", entry->apic, entry->pin); pr_cont("\n"); } printk(KERN_INFO ".................................... done.\n"); } /* Where if anywhere is the i8259 connect in external int mode */ static struct { int pin, apic; } ioapic_i8259 = { -1, -1 }; void __init enable_IO_APIC(void) { int i8259_apic, i8259_pin; int apic, pin; if (skip_ioapic_setup) nr_ioapics = 0; if (!nr_legacy_irqs() || !nr_ioapics) return; for_each_ioapic_pin(apic, pin) { /* See if any of the pins is in ExtINT mode */ struct IO_APIC_route_entry entry = ioapic_read_entry(apic, pin); /* If the interrupt line is enabled and in ExtInt mode * I have found the pin where the i8259 is connected. */ if ((entry.mask == 0) && (entry.delivery_mode == dest_ExtINT)) { ioapic_i8259.apic = apic; ioapic_i8259.pin = pin; goto found_i8259; } } found_i8259: /* Look to see what if the MP table has reported the ExtINT */ /* If we could not find the appropriate pin by looking at the ioapic * the i8259 probably is not connected the ioapic but give the * mptable a chance anyway. */ i8259_pin = find_isa_irq_pin(0, mp_ExtINT); i8259_apic = find_isa_irq_apic(0, mp_ExtINT); /* Trust the MP table if nothing is setup in the hardware */ if ((ioapic_i8259.pin == -1) && (i8259_pin >= 0)) { printk(KERN_WARNING "ExtINT not setup in hardware but reported by MP table\n"); ioapic_i8259.pin = i8259_pin; ioapic_i8259.apic = i8259_apic; } /* Complain if the MP table and the hardware disagree */ if (((ioapic_i8259.apic != i8259_apic) || (ioapic_i8259.pin != i8259_pin)) && (i8259_pin >= 0) && (ioapic_i8259.pin >= 0)) { printk(KERN_WARNING "ExtINT in hardware and MP table differ\n"); } /* * Do not trust the IO-APIC being empty at bootup */ clear_IO_APIC(); } void native_disable_io_apic(void) { /* * If the i8259 is routed through an IOAPIC * Put that IOAPIC in virtual wire mode * so legacy interrupts can be delivered. */ if (ioapic_i8259.pin != -1) { struct IO_APIC_route_entry entry; memset(&entry, 0, sizeof(entry)); entry.mask = 0; /* Enabled */ entry.trigger = 0; /* Edge */ entry.irr = 0; entry.polarity = 0; /* High */ entry.delivery_status = 0; entry.dest_mode = 0; /* Physical */ entry.delivery_mode = dest_ExtINT; /* ExtInt */ entry.vector = 0; entry.dest = read_apic_id(); /* * Add it to the IO-APIC irq-routing table: */ ioapic_write_entry(ioapic_i8259.apic, ioapic_i8259.pin, entry); } if (cpu_has_apic || apic_from_smp_config()) disconnect_bsp_APIC(ioapic_i8259.pin != -1); } /* * Not an __init, needed by the reboot code */ void disable_IO_APIC(void) { /* * Clear the IO-APIC before rebooting: */ clear_IO_APIC(); if (!nr_legacy_irqs()) return; x86_io_apic_ops.disable(); } #ifdef CONFIG_X86_32 /* * function to set the IO-APIC physical IDs based on the * values stored in the MPC table. * * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 */ void __init setup_ioapic_ids_from_mpc_nocheck(void) { union IO_APIC_reg_00 reg_00; physid_mask_t phys_id_present_map; int ioapic_idx; int i; unsigned char old_id; unsigned long flags; /* * This is broken; anything with a real cpu count has to * circumvent this idiocy regardless. */ apic->ioapic_phys_id_map(&phys_cpu_present_map, &phys_id_present_map); /* * Set the IOAPIC ID to the value stored in the MPC table. */ for_each_ioapic(ioapic_idx) { /* Read the register 0 value */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); old_id = mpc_ioapic_id(ioapic_idx); if (mpc_ioapic_id(ioapic_idx) >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", ioapic_idx, mpc_ioapic_id(ioapic_idx)); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); ioapics[ioapic_idx].mp_config.apicid = reg_00.bits.ID; } /* * Sanity check, is the ID really free? Every APIC in a * system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (apic->check_apicid_used(&phys_id_present_map, mpc_ioapic_id(ioapic_idx))) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", ioapic_idx, mpc_ioapic_id(ioapic_idx)); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; if (i >= get_physical_broadcast()) panic("Max APIC ID exceeded!\n"); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); ioapics[ioapic_idx].mp_config.apicid = i; } else { physid_mask_t tmp; apic->apicid_to_cpu_present(mpc_ioapic_id(ioapic_idx), &tmp); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", mpc_ioapic_id(ioapic_idx)); physids_or(phys_id_present_map, phys_id_present_map, tmp); } /* * We need to adjust the IRQ routing table * if the ID changed. */ if (old_id != mpc_ioapic_id(ioapic_idx)) for (i = 0; i < mp_irq_entries; i++) if (mp_irqs[i].dstapic == old_id) mp_irqs[i].dstapic = mpc_ioapic_id(ioapic_idx); /* * Update the ID register according to the right value * from the MPC table if they are different. */ if (mpc_ioapic_id(ioapic_idx) == reg_00.bits.ID) continue; apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", mpc_ioapic_id(ioapic_idx)); reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic_idx, 0, reg_00.raw); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* * Sanity check */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) pr_cont("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); } } void __init setup_ioapic_ids_from_mpc(void) { if (acpi_ioapic) return; /* * Don't check I/O APIC IDs for xAPIC systems. They have * no meaning without the serial APIC bus. */ if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) || APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) return; setup_ioapic_ids_from_mpc_nocheck(); } #endif int no_timer_check __initdata; static int __init notimercheck(char *s) { no_timer_check = 1; return 1; } __setup("no_timer_check", notimercheck); /* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: * * - timer IRQ defaults to IO-APIC IRQ * - if this function detects that timer IRQs are defunct, then we fall * back to ISA timer IRQs */ static int __init timer_irq_works(void) { unsigned long t1 = jiffies; unsigned long flags; if (no_timer_check) return 1; local_save_flags(flags); local_irq_enable(); /* Let ten ticks pass... */ mdelay((10 * 1000) / HZ); local_irq_restore(flags); /* * Expect a few ticks at least, to be sure some possible * glue logic does not lock up after one or two first * ticks in a non-ExtINT mode. Also the local APIC * might have cached one ExtINT interrupt. Finally, at * least one tick may be lost due to delays. */ /* jiffies wrap? */ if (time_after(jiffies, t1 + 4)) return 1; return 0; } /* * In the SMP+IOAPIC case it might happen that there are an unspecified * number of pending IRQ events unhandled. These cases are very rare, * so we 'resend' these IRQs via IPIs, to the same CPU. It's much * better to do it this way as thus we do not have to be aware of * 'pending' interrupts in the IRQ path, except at this point. */ /* * Edge triggered needs to resend any interrupt * that was delayed but this is now handled in the device * independent code. */ /* * Starting up a edge-triggered IO-APIC interrupt is * nasty - we need to make sure that we get the edge. * If it is already asserted for some reason, we need * return 1 to indicate that is was pending. * * This is not complete - we should be able to fake * an edge even if it isn't on the 8259A... */ static unsigned int startup_ioapic_irq(struct irq_data *data) { int was_pending = 0, irq = data->irq; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); if (irq < nr_legacy_irqs()) { legacy_pic->mask(irq); if (legacy_pic->irq_pending(irq)) was_pending = 1; } __unmask_ioapic(irqd_cfg(data)); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return was_pending; } /* * Level and edge triggered IO-APIC interrupts need different handling, * so we use two separate IRQ descriptors. Edge triggered IRQs can be * handled with the level-triggered descriptor, but that one has slightly * more overhead. Level-triggered interrupts cannot be handled with the * edge-triggered handler, without risking IRQ storms and other ugly * races. */ static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg) { int apic, pin; struct irq_pin_list *entry; u8 vector = cfg->vector; for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; apic = entry->apic; pin = entry->pin; io_apic_write(apic, 0x11 + pin*2, dest); reg = io_apic_read(apic, 0x10 + pin*2); reg &= ~IO_APIC_REDIR_VECTOR_MASK; reg |= vector; io_apic_modify(apic, 0x10 + pin*2, reg); } } int native_ioapic_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force) { unsigned int dest, irq = data->irq; unsigned long flags; int ret; if (!config_enabled(CONFIG_SMP)) return -EPERM; raw_spin_lock_irqsave(&ioapic_lock, flags); ret = apic_set_affinity(data, mask, &dest); if (!ret) { /* Only the high 8 bits are valid. */ dest = SET_APIC_LOGICAL_ID(dest); __target_IO_APIC_irq(irq, dest, irqd_cfg(data)); ret = IRQ_SET_MASK_OK_NOCOPY; } raw_spin_unlock_irqrestore(&ioapic_lock, flags); return ret; } atomic_t irq_mis_count; #ifdef CONFIG_GENERIC_PENDING_IRQ static bool io_apic_level_ack_pending(struct irq_cfg *cfg) { struct irq_pin_list *entry; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, cfg->irq_2_pin) { unsigned int reg; int pin; pin = entry->pin; reg = io_apic_read(entry->apic, 0x10 + pin*2); /* Is the remote IRR bit set? */ if (reg & IO_APIC_REDIR_REMOTE_IRR) { raw_spin_unlock_irqrestore(&ioapic_lock, flags); return true; } } raw_spin_unlock_irqrestore(&ioapic_lock, flags); return false; } static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) { /* If we are moving the irq we need to mask it */ if (unlikely(irqd_is_setaffinity_pending(data))) { mask_ioapic(cfg); return true; } return false; } static inline void ioapic_irqd_unmask(struct irq_data *data, struct irq_cfg *cfg, bool masked) { if (unlikely(masked)) { /* Only migrate the irq if the ack has been received. * * On rare occasions the broadcast level triggered ack gets * delayed going to ioapics, and if we reprogram the * vector while Remote IRR is still set the irq will never * fire again. * * To prevent this scenario we read the Remote IRR bit * of the ioapic. This has two effects. * - On any sane system the read of the ioapic will * flush writes (and acks) going to the ioapic from * this cpu. * - We get to see if the ACK has actually been delivered. * * Based on failed experiments of reprogramming the * ioapic entry from outside of irq context starting * with masking the ioapic entry and then polling until * Remote IRR was clear before reprogramming the * ioapic I don't trust the Remote IRR bit to be * completey accurate. * * However there appears to be no other way to plug * this race, so if the Remote IRR bit is not * accurate and is causing problems then it is a hardware bug * and you can go talk to the chipset vendor about it. */ if (!io_apic_level_ack_pending(cfg)) irq_move_masked_irq(data); unmask_ioapic(cfg); } } #else static inline bool ioapic_irqd_mask(struct irq_data *data, struct irq_cfg *cfg) { return false; } static inline void ioapic_irqd_unmask(struct irq_data *data, struct irq_cfg *cfg, bool masked) { } #endif static void ack_ioapic_level(struct irq_data *data) { struct irq_cfg *cfg = irqd_cfg(data); int i, irq = data->irq; unsigned long v; bool masked; irq_complete_move(cfg); masked = ioapic_irqd_mask(data, cfg); /* * It appears there is an erratum which affects at least version 0x11 * of I/O APIC (that's the 82093AA and cores integrated into various * chipsets). Under certain conditions a level-triggered interrupt is * erroneously delivered as edge-triggered one but the respective IRR * bit gets set nevertheless. As a result the I/O unit expects an EOI * message but it will never arrive and further interrupts are blocked * from the source. The exact reason is so far unknown, but the * phenomenon was observed when two consecutive interrupt requests * from a given source get delivered to the same CPU and the source is * temporarily disabled in between. * * A workaround is to simulate an EOI message manually. We achieve it * by setting the trigger mode to edge and then to level when the edge * trigger mode gets detected in the TMR of a local APIC for a * level-triggered interrupt. We mask the source for the time of the * operation to prevent an edge-triggered interrupt escaping meanwhile. * The idea is from Manfred Spraul. --macro * * Also in the case when cpu goes offline, fixup_irqs() will forward * any unhandled interrupt on the offlined cpu to the new cpu * destination that is handling the corresponding interrupt. This * interrupt forwarding is done via IPI's. Hence, in this case also * level-triggered io-apic interrupt will be seen as an edge * interrupt in the IRR. And we can't rely on the cpu's EOI * to be broadcasted to the IO-APIC's which will clear the remoteIRR * corresponding to the level-triggered interrupt. Hence on IO-APIC's * supporting EOI register, we do an explicit EOI to clear the * remote IRR and on IO-APIC's which don't have an EOI register, * we use the above logic (mask+edge followed by unmask+level) from * Manfred Spraul to clear the remote IRR. */ i = cfg->vector; v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); /* * We must acknowledge the irq before we move it or the acknowledge will * not propagate properly. */ ack_APIC_irq(); /* * Tail end of clearing remote IRR bit (either by delivering the EOI * message via io-apic EOI register write or simulating it using * mask+edge followed by unnask+level logic) manually when the * level triggered interrupt is seen as the edge triggered interrupt * at the cpu. */ if (!(v & (1 << (i & 0x1f)))) { atomic_inc(&irq_mis_count); eoi_ioapic_irq(irq, cfg); } ioapic_irqd_unmask(data, cfg, masked); } static struct irq_chip ioapic_chip __read_mostly = { .name = "IO-APIC", .irq_startup = startup_ioapic_irq, .irq_mask = mask_ioapic_irq, .irq_unmask = unmask_ioapic_irq, .irq_ack = apic_ack_edge, .irq_eoi = ack_ioapic_level, .irq_set_affinity = native_ioapic_set_affinity, .irq_retrigger = apic_retrigger_irq, .flags = IRQCHIP_SKIP_SET_WAKE, }; static inline void init_IO_APIC_traps(void) { struct irq_cfg *cfg; unsigned int irq; for_each_active_irq(irq) { cfg = irq_cfg(irq); if (IO_APIC_IRQ(irq) && cfg && !cfg->vector) { /* * Hmm.. We don't have an entry for this, * so default to an old-fashioned 8259 * interrupt if we can.. */ if (irq < nr_legacy_irqs()) legacy_pic->make_irq(irq); else /* Strange. Oh, well.. */ irq_set_chip(irq, &no_irq_chip); } } } /* * The local APIC irq-chip implementation: */ static void mask_lapic_irq(struct irq_data *data) { unsigned long v; v = apic_read(APIC_LVT0); apic_write(APIC_LVT0, v | APIC_LVT_MASKED); } static void unmask_lapic_irq(struct irq_data *data) { unsigned long v; v = apic_read(APIC_LVT0); apic_write(APIC_LVT0, v & ~APIC_LVT_MASKED); } static void ack_lapic_irq(struct irq_data *data) { ack_APIC_irq(); } static struct irq_chip lapic_chip __read_mostly = { .name = "local-APIC", .irq_mask = mask_lapic_irq, .irq_unmask = unmask_lapic_irq, .irq_ack = ack_lapic_irq, }; static void lapic_register_intr(int irq) { irq_clear_status_flags(irq, IRQ_LEVEL); irq_set_chip_and_handler_name(irq, &lapic_chip, handle_edge_irq, "edge"); } /* * This looks a bit hackish but it's about the only one way of sending * a few INTA cycles to 8259As and any associated glue logic. ICR does * not support the ExtINT mode, unfortunately. We need to send these * cycles as some i82489DX-based boards have glue logic that keeps the * 8259A interrupt line asserted until INTA. --macro */ static inline void __init unlock_ExtINT_logic(void) { int apic, pin, i; struct IO_APIC_route_entry entry0, entry1; unsigned char save_control, save_freq_select; pin = find_isa_irq_pin(8, mp_INT); if (pin == -1) { WARN_ON_ONCE(1); return; } apic = find_isa_irq_apic(8, mp_INT); if (apic == -1) { WARN_ON_ONCE(1); return; } entry0 = ioapic_read_entry(apic, pin); clear_IO_APIC_pin(apic, pin); memset(&entry1, 0, sizeof(entry1)); entry1.dest_mode = 0; /* physical delivery */ entry1.mask = 0; /* unmask IRQ now */ entry1.dest = hard_smp_processor_id(); entry1.delivery_mode = dest_ExtINT; entry1.polarity = entry0.polarity; entry1.trigger = 0; entry1.vector = 0; ioapic_write_entry(apic, pin, entry1); save_control = CMOS_READ(RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, RTC_FREQ_SELECT); CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); i = 100; while (i-- > 0) { mdelay(10); if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) i -= 10; } CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); clear_IO_APIC_pin(apic, pin); ioapic_write_entry(apic, pin, entry0); } static int disable_timer_pin_1 __initdata; /* Actually the next is obsolete, but keep it for paranoid reasons -AK */ static int __init disable_timer_pin_setup(char *arg) { disable_timer_pin_1 = 1; return 0; } early_param("disable_timer_pin_1", disable_timer_pin_setup); /* * This code may look a bit paranoid, but it's supposed to cooperate with * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ * is so screwy. Thanks to Brian Perkins for testing/hacking this beast * fanatically on his truly buggy board. * * FIXME: really need to revamp this for all platforms. */ static inline void __init check_timer(void) { struct irq_cfg *cfg = irq_cfg(0); int node = cpu_to_node(0); int apic1, pin1, apic2, pin2; unsigned long flags; int no_pin1 = 0; local_irq_save(flags); /* * get/set the timer IRQ vector: */ legacy_pic->mask(0); assign_irq_vector(0, cfg, apic->target_cpus()); /* * As IRQ0 is to be enabled in the 8259A, the virtual * wire has to be disabled in the local APIC. Also * timer interrupts need to be acknowledged manually in * the 8259A for the i82489DX when using the NMI * watchdog as that APIC treats NMIs as level-triggered. * The AEOI mode will finish them in the 8259A * automatically. */ apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); legacy_pic->init(1); pin1 = find_isa_irq_pin(0, mp_INT); apic1 = find_isa_irq_apic(0, mp_INT); pin2 = ioapic_i8259.pin; apic2 = ioapic_i8259.apic; apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " "apic1=%d pin1=%d apic2=%d pin2=%d\n", cfg->vector, apic1, pin1, apic2, pin2); /* * Some BIOS writers are clueless and report the ExtINTA * I/O APIC input from the cascaded 8259A as the timer * interrupt input. So just in case, if only one pin * was found above, try it both directly and through the * 8259A. */ if (pin1 == -1) { panic_if_irq_remap("BIOS bug: timer not connected to IO-APIC"); pin1 = pin2; apic1 = apic2; no_pin1 = 1; } else if (pin2 == -1) { pin2 = pin1; apic2 = apic1; } if (pin1 != -1) { /* * Ok, does IRQ0 through the IOAPIC work? */ if (no_pin1) { add_pin_to_irq_node(cfg, node, apic1, pin1); setup_timer_IRQ0_pin(apic1, pin1, cfg->vector); } else { /* for edge trigger, setup_ioapic_irq already * leave it unmasked. * so only need to unmask if it is level-trigger * do we really have level trigger timer? */ int idx; idx = find_irq_entry(apic1, pin1, mp_INT); if (idx != -1 && irq_trigger(idx)) unmask_ioapic(cfg); } if (timer_irq_works()) { if (disable_timer_pin_1 > 0) clear_IO_APIC_pin(0, pin1); goto out; } panic_if_irq_remap("timer doesn't work through Interrupt-remapped IO-APIC"); local_irq_disable(); clear_IO_APIC_pin(apic1, pin1); if (!no_pin1) apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " "8254 timer not connected to IO-APIC\n"); apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer " "(IRQ0) through the 8259A ...\n"); apic_printk(APIC_QUIET, KERN_INFO "..... (found apic %d pin %d) ...\n", apic2, pin2); /* * legacy devices should be connected to IO APIC #0 */ replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2); setup_timer_IRQ0_pin(apic2, pin2, cfg->vector); legacy_pic->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "....... works.\n"); goto out; } /* * Cleanup, just in case ... */ local_irq_disable(); legacy_pic->mask(0); clear_IO_APIC_pin(apic2, pin2); apic_printk(APIC_QUIET, KERN_INFO "....... failed.\n"); } apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as Virtual Wire IRQ...\n"); lapic_register_intr(0); apic_write(APIC_LVT0, APIC_DM_FIXED | cfg->vector); /* Fixed mode */ legacy_pic->unmask(0); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } local_irq_disable(); legacy_pic->mask(0); apic_write(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | cfg->vector); apic_printk(APIC_QUIET, KERN_INFO "..... failed.\n"); apic_printk(APIC_QUIET, KERN_INFO "...trying to set up timer as ExtINT IRQ...\n"); legacy_pic->init(0); legacy_pic->make_irq(0); apic_write(APIC_LVT0, APIC_DM_EXTINT); unlock_ExtINT_logic(); if (timer_irq_works()) { apic_printk(APIC_QUIET, KERN_INFO "..... works.\n"); goto out; } local_irq_disable(); apic_printk(APIC_QUIET, KERN_INFO "..... failed :(.\n"); if (apic_is_x2apic_enabled()) apic_printk(APIC_QUIET, KERN_INFO "Perhaps problem with the pre-enabled x2apic mode\n" "Try booting with x2apic and interrupt-remapping disabled in the bios.\n"); panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " "report. Then try booting with the 'noapic' option.\n"); out: local_irq_restore(flags); } /* * Traditionally ISA IRQ2 is the cascade IRQ, and is not available * to devices. However there may be an I/O APIC pin available for * this interrupt regardless. The pin may be left unconnected, but * typically it will be reused as an ExtINT cascade interrupt for * the master 8259A. In the MPS case such a pin will normally be * reported as an ExtINT interrupt in the MP table. With ACPI * there is no provision for ExtINT interrupts, and in the absence * of an override it would be treated as an ordinary ISA I/O APIC * interrupt, that is edge-triggered and unmasked by default. We * used to do this, but it caused problems on some systems because * of the NMI watchdog and sometimes IRQ0 of the 8254 timer using * the same ExtINT cascade interrupt to drive the local APIC of the * bootstrap processor. Therefore we refrain from routing IRQ2 to * the I/O APIC in all cases now. No actual device should request * it anyway. --macro */ #define PIC_IRQS (1UL << PIC_CASCADE_IR) static int mp_irqdomain_create(int ioapic) { size_t size; int hwirqs = mp_ioapic_pin_count(ioapic); struct ioapic *ip = &ioapics[ioapic]; struct ioapic_domain_cfg *cfg = &ip->irqdomain_cfg; struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(ioapic); size = sizeof(struct mp_pin_info) * mp_ioapic_pin_count(ioapic); ip->pin_info = kzalloc(size, GFP_KERNEL); if (!ip->pin_info) return -ENOMEM; if (cfg->type == IOAPIC_DOMAIN_INVALID) return 0; ip->irqdomain = irq_domain_add_linear(cfg->dev, hwirqs, cfg->ops, (void *)(long)ioapic); if(!ip->irqdomain) { kfree(ip->pin_info); ip->pin_info = NULL; return -ENOMEM; } if (cfg->type == IOAPIC_DOMAIN_LEGACY || cfg->type == IOAPIC_DOMAIN_STRICT) ioapic_dynirq_base = max(ioapic_dynirq_base, gsi_cfg->gsi_end + 1); return 0; } static void ioapic_destroy_irqdomain(int idx) { if (ioapics[idx].irqdomain) { irq_domain_remove(ioapics[idx].irqdomain); ioapics[idx].irqdomain = NULL; } kfree(ioapics[idx].pin_info); ioapics[idx].pin_info = NULL; } void __init setup_IO_APIC(void) { int ioapic; if (skip_ioapic_setup || !nr_ioapics) return; io_apic_irqs = nr_legacy_irqs() ? ~PIC_IRQS : ~0UL; apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); for_each_ioapic(ioapic) BUG_ON(mp_irqdomain_create(ioapic)); /* * Set up IO-APIC IRQ routing. */ x86_init.mpparse.setup_ioapic_ids(); sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); if (nr_legacy_irqs()) check_timer(); ioapic_initialized = 1; } /* * Called after all the initialization is done. If we didn't find any * APIC bugs then we can allow the modify fast path */ static int __init io_apic_bug_finalize(void) { if (sis_apic_bug == -1) sis_apic_bug = 0; return 0; } late_initcall(io_apic_bug_finalize); static void resume_ioapic_id(int ioapic_idx) { unsigned long flags; union IO_APIC_reg_00 reg_00; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic_idx, 0); if (reg_00.bits.ID != mpc_ioapic_id(ioapic_idx)) { reg_00.bits.ID = mpc_ioapic_id(ioapic_idx); io_apic_write(ioapic_idx, 0, reg_00.raw); } raw_spin_unlock_irqrestore(&ioapic_lock, flags); } static void ioapic_resume(void) { int ioapic_idx; for_each_ioapic_reverse(ioapic_idx) resume_ioapic_id(ioapic_idx); restore_ioapic_entries(); } static struct syscore_ops ioapic_syscore_ops = { .suspend = save_ioapic_entries, .resume = ioapic_resume, }; static int __init ioapic_init_ops(void) { register_syscore_ops(&ioapic_syscore_ops); return 0; } device_initcall(ioapic_init_ops); static int io_apic_setup_irq_pin(unsigned int irq, int node, struct io_apic_irq_attr *attr) { struct irq_cfg *cfg = alloc_irq_and_cfg_at(irq, node); int ret; if (!cfg) return -EINVAL; ret = __add_pin_to_irq_node(cfg, node, attr->ioapic, attr->ioapic_pin); if (!ret) setup_ioapic_irq(irq, cfg, attr); return ret; } static int io_apic_get_redir_entries(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_01.raw = io_apic_read(ioapic, 1); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* The register returns the maximum index redir index * supported, which is one less than the total number of redir * entries. */ return reg_01.bits.entries + 1; } unsigned int arch_dynirq_lower_bound(unsigned int from) { /* * dmar_alloc_hwirq() may be called before setup_IO_APIC(), so use * gsi_top if ioapic_dynirq_base hasn't been initialized yet. */ return ioapic_initialized ? ioapic_dynirq_base : gsi_top; } #ifdef CONFIG_X86_32 static int io_apic_get_unique_id(int ioapic, int apic_id) { union IO_APIC_reg_00 reg_00; static physid_mask_t apic_id_map = PHYSID_MASK_NONE; physid_mask_t tmp; unsigned long flags; int i = 0; /* * The P4 platform supports up to 256 APIC IDs on two separate APIC * buses (one for LAPICs, one for IOAPICs), where predecessors only * supports up to 16 on one shared APIC bus. * * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full * advantage of new APIC bus architecture. */ if (physids_empty(apic_id_map)) apic->ioapic_phys_id_map(&phys_cpu_present_map, &apic_id_map); raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(ioapic, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); if (apic_id >= get_physical_broadcast()) { printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " "%d\n", ioapic, apic_id, reg_00.bits.ID); apic_id = reg_00.bits.ID; } /* * Every APIC in a system must have a unique ID or we get lots of nice * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (apic->check_apicid_used(&apic_id_map, apic_id)) { for (i = 0; i < get_physical_broadcast(); i++) { if (!apic->check_apicid_used(&apic_id_map, i)) break; } if (i == get_physical_broadcast()) panic("Max apic_id exceeded!\n"); printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " "trying %d\n", ioapic, apic_id, i); apic_id = i; } apic->apicid_to_cpu_present(apic_id, &tmp); physids_or(apic_id_map, apic_id_map, tmp); if (reg_00.bits.ID != apic_id) { reg_00.bits.ID = apic_id; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(ioapic, 0, reg_00.raw); reg_00.raw = io_apic_read(ioapic, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ if (reg_00.bits.ID != apic_id) { pr_err("IOAPIC[%d]: Unable to change apic_id!\n", ioapic); return -1; } } apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); return apic_id; } static u8 io_apic_unique_id(int idx, u8 id) { if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid])) return io_apic_get_unique_id(idx, id); else return id; } #else static u8 io_apic_unique_id(int idx, u8 id) { union IO_APIC_reg_00 reg_00; DECLARE_BITMAP(used, 256); unsigned long flags; u8 new_id; int i; bitmap_zero(used, 256); for_each_ioapic(i) __set_bit(mpc_ioapic_id(i), used); /* Hand out the requested id if available */ if (!test_bit(id, used)) return id; /* * Read the current id from the ioapic and keep it if * available. */ raw_spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); new_id = reg_00.bits.ID; if (!test_bit(new_id, used)) { apic_printk(APIC_VERBOSE, KERN_INFO "IOAPIC[%d]: Using reg apic_id %d instead of %d\n", idx, new_id, id); return new_id; } /* * Get the next free id and write it to the ioapic. */ new_id = find_first_zero_bit(used, 256); reg_00.bits.ID = new_id; raw_spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(idx, 0, reg_00.raw); reg_00.raw = io_apic_read(idx, 0); raw_spin_unlock_irqrestore(&ioapic_lock, flags); /* Sanity check */ BUG_ON(reg_00.bits.ID != new_id); return new_id; } #endif static int io_apic_get_version(int ioapic) { union IO_APIC_reg_01 reg_01; unsigned long flags; raw_spin_lock_irqsave(&ioapic_lock, flags); reg_01.raw = io_apic_read(ioapic, 1); raw_spin_unlock_irqrestore(&ioapic_lock, flags); return reg_01.bits.version; } int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity) { int ioapic, pin, idx; if (skip_ioapic_setup) return -1; ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return -1; pin = mp_find_ioapic_pin(ioapic, gsi); if (pin < 0) return -1; idx = find_irq_entry(ioapic, pin, mp_INT); if (idx < 0) return -1; *trigger = irq_trigger(idx); *polarity = irq_polarity(idx); return 0; } /* * This function currently is only a helper for the i386 smp boot process where * we need to reprogram the ioredtbls to cater for the cpus which have come online * so mask in all cases should simply be apic->target_cpus() */ #ifdef CONFIG_SMP void __init setup_ioapic_dest(void) { int pin, ioapic, irq, irq_entry; const struct cpumask *mask; struct irq_data *idata; if (skip_ioapic_setup == 1) return; for_each_ioapic_pin(ioapic, pin) { irq_entry = find_irq_entry(ioapic, pin, mp_INT); if (irq_entry == -1) continue; irq = pin_2_irq(irq_entry, ioapic, pin, 0); if (irq < 0 || !mp_init_irq_at_boot(ioapic, irq)) continue; idata = irq_get_irq_data(irq); /* * Honour affinities which have been set in early boot */ if (!irqd_can_balance(idata) || irqd_affinity_was_set(idata)) mask = idata->affinity; else mask = apic->target_cpus(); x86_io_apic_ops.set_affinity(idata, mask, false); } } #endif #define IOAPIC_RESOURCE_NAME_SIZE 11 static struct resource *ioapic_resources; static struct resource * __init ioapic_setup_resources(void) { unsigned long n; struct resource *res; char *mem; int i, num = 0; for_each_ioapic(i) num++; if (num == 0) return NULL; n = IOAPIC_RESOURCE_NAME_SIZE + sizeof(struct resource); n *= num; mem = alloc_bootmem(n); res = (void *)mem; mem += sizeof(struct resource) * num; num = 0; for_each_ioapic(i) { res[num].name = mem; res[num].flags = IORESOURCE_MEM | IORESOURCE_BUSY; snprintf(mem, IOAPIC_RESOURCE_NAME_SIZE, "IOAPIC %u", i); mem += IOAPIC_RESOURCE_NAME_SIZE; num++; ioapics[i].iomem_res = res; } ioapic_resources = res; return res; } void __init native_io_apic_init_mappings(void) { unsigned long ioapic_phys, idx = FIX_IO_APIC_BASE_0; struct resource *ioapic_res; int i; ioapic_res = ioapic_setup_resources(); for_each_ioapic(i) { if (smp_found_config) { ioapic_phys = mpc_ioapic_addr(i); #ifdef CONFIG_X86_32 if (!ioapic_phys) { printk(KERN_ERR "WARNING: bogus zero IO-APIC " "address found in MPTABLE, " "disabling IO/APIC support!\n"); smp_found_config = 0; skip_ioapic_setup = 1; goto fake_ioapic_page; } #endif } else { #ifdef CONFIG_X86_32 fake_ioapic_page: #endif ioapic_phys = (unsigned long)alloc_bootmem_pages(PAGE_SIZE); ioapic_phys = __pa(ioapic_phys); } set_fixmap_nocache(idx, ioapic_phys); apic_printk(APIC_VERBOSE, "mapped IOAPIC to %08lx (%08lx)\n", __fix_to_virt(idx) + (ioapic_phys & ~PAGE_MASK), ioapic_phys); idx++; ioapic_res->start = ioapic_phys; ioapic_res->end = ioapic_phys + IO_APIC_SLOT_SIZE - 1; ioapic_res++; } } void __init ioapic_insert_resources(void) { int i; struct resource *r = ioapic_resources; if (!r) { if (nr_ioapics > 0) printk(KERN_ERR "IO APIC resources couldn't be allocated.\n"); return; } for_each_ioapic(i) { insert_resource(&iomem_resource, r); r++; } } int mp_find_ioapic(u32 gsi) { int i; if (nr_ioapics == 0) return -1; /* Find the IOAPIC that manages this GSI. */ for_each_ioapic(i) { struct mp_ioapic_gsi *gsi_cfg = mp_ioapic_gsi_routing(i); if (gsi >= gsi_cfg->gsi_base && gsi <= gsi_cfg->gsi_end) return i; } printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi); return -1; } int mp_find_ioapic_pin(int ioapic, u32 gsi) { struct mp_ioapic_gsi *gsi_cfg; if (WARN_ON(ioapic < 0)) return -1; gsi_cfg = mp_ioapic_gsi_routing(ioapic); if (WARN_ON(gsi > gsi_cfg->gsi_end)) return -1; return gsi - gsi_cfg->gsi_base; } static int bad_ioapic_register(int idx) { union IO_APIC_reg_00 reg_00; union IO_APIC_reg_01 reg_01; union IO_APIC_reg_02 reg_02; reg_00.raw = io_apic_read(idx, 0); reg_01.raw = io_apic_read(idx, 1); reg_02.raw = io_apic_read(idx, 2); if (reg_00.raw == -1 && reg_01.raw == -1 && reg_02.raw == -1) { pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n", mpc_ioapic_addr(idx)); return 1; } return 0; } static int find_free_ioapic_entry(void) { int idx; for (idx = 0; idx < MAX_IO_APICS; idx++) if (ioapics[idx].nr_registers == 0) return idx; return MAX_IO_APICS; } /** * mp_register_ioapic - Register an IOAPIC device * @id: hardware IOAPIC ID * @address: physical address of IOAPIC register area * @gsi_base: base of GSI associated with the IOAPIC * @cfg: configuration information for the IOAPIC */ int mp_register_ioapic(int id, u32 address, u32 gsi_base, struct ioapic_domain_cfg *cfg) { bool hotplug = !!ioapic_initialized; struct mp_ioapic_gsi *gsi_cfg; int idx, ioapic, entries; u32 gsi_end; if (!address) { pr_warn("Bogus (zero) I/O APIC address found, skipping!\n"); return -EINVAL; } for_each_ioapic(ioapic) if (ioapics[ioapic].mp_config.apicaddr == address) { pr_warn("address 0x%x conflicts with IOAPIC%d\n", address, ioapic); return -EEXIST; } idx = find_free_ioapic_entry(); if (idx >= MAX_IO_APICS) { pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n", MAX_IO_APICS, idx); return -ENOSPC; } ioapics[idx].mp_config.type = MP_IOAPIC; ioapics[idx].mp_config.flags = MPC_APIC_USABLE; ioapics[idx].mp_config.apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); if (bad_ioapic_register(idx)) { clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENODEV; } ioapics[idx].mp_config.apicid = io_apic_unique_id(idx, id); ioapics[idx].mp_config.apicver = io_apic_get_version(idx); /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ entries = io_apic_get_redir_entries(idx); gsi_end = gsi_base + entries - 1; for_each_ioapic(ioapic) { gsi_cfg = mp_ioapic_gsi_routing(ioapic); if ((gsi_base >= gsi_cfg->gsi_base && gsi_base <= gsi_cfg->gsi_end) || (gsi_end >= gsi_cfg->gsi_base && gsi_end <= gsi_cfg->gsi_end)) { pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n", gsi_base, gsi_end, gsi_cfg->gsi_base, gsi_cfg->gsi_end); clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENOSPC; } } gsi_cfg = mp_ioapic_gsi_routing(idx); gsi_cfg->gsi_base = gsi_base; gsi_cfg->gsi_end = gsi_end; ioapics[idx].irqdomain = NULL; ioapics[idx].irqdomain_cfg = *cfg; /* * If mp_register_ioapic() is called during early boot stage when * walking ACPI/SFI/DT tables, it's too early to create irqdomain, * we are still using bootmem allocator. So delay it to setup_IO_APIC(). */ if (hotplug) { if (mp_irqdomain_create(idx)) { clear_fixmap(FIX_IO_APIC_BASE_0 + idx); return -ENOMEM; } alloc_ioapic_saved_registers(idx); } if (gsi_cfg->gsi_end >= gsi_top) gsi_top = gsi_cfg->gsi_end + 1; if (nr_ioapics <= idx) nr_ioapics = idx + 1; /* Set nr_registers to mark entry present */ ioapics[idx].nr_registers = entries; pr_info("IOAPIC[%d]: apic_id %d, version %d, address 0x%x, GSI %d-%d\n", idx, mpc_ioapic_id(idx), mpc_ioapic_ver(idx), mpc_ioapic_addr(idx), gsi_cfg->gsi_base, gsi_cfg->gsi_end); return 0; } int mp_unregister_ioapic(u32 gsi_base) { int ioapic, pin; int found = 0; struct mp_pin_info *pin_info; for_each_ioapic(ioapic) if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) { found = 1; break; } if (!found) { pr_warn("can't find IOAPIC for GSI %d\n", gsi_base); return -ENODEV; } for_each_pin(ioapic, pin) { pin_info = mp_pin_info(ioapic, pin); if (pin_info->count) { pr_warn("pin%d on IOAPIC%d is still in use.\n", pin, ioapic); return -EBUSY; } } /* Mark entry not present */ ioapics[ioapic].nr_registers = 0; ioapic_destroy_irqdomain(ioapic); free_ioapic_saved_registers(ioapic); if (ioapics[ioapic].iomem_res) release_resource(ioapics[ioapic].iomem_res); clear_fixmap(FIX_IO_APIC_BASE_0 + ioapic); memset(&ioapics[ioapic], 0, sizeof(ioapics[ioapic])); return 0; } int mp_ioapic_registered(u32 gsi_base) { int ioapic; for_each_ioapic(ioapic) if (ioapics[ioapic].gsi_config.gsi_base == gsi_base) return 1; return 0; } static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr, int ioapic, int ioapic_pin, int trigger, int polarity) { irq_attr->ioapic = ioapic; irq_attr->ioapic_pin = ioapic_pin; irq_attr->trigger = trigger; irq_attr->polarity = polarity; } int mp_irqdomain_map(struct irq_domain *domain, unsigned int virq, irq_hw_number_t hwirq) { int ioapic = mp_irqdomain_ioapic_idx(domain); struct mp_pin_info *info = mp_pin_info(ioapic, hwirq); struct io_apic_irq_attr attr; /* Get default attribute if not set by caller yet */ if (!info->set) { u32 gsi = mp_pin_to_gsi(ioapic, hwirq); if (acpi_get_override_irq(gsi, &info->trigger, &info->polarity) < 0) { /* * PCI interrupts are always polarity one level * triggered. */ info->trigger = 1; info->polarity = 1; } info->node = NUMA_NO_NODE; /* * setup_IO_APIC_irqs() programs all legacy IRQs with default * trigger and polarity attributes. Don't set the flag for that * case so the first legacy IRQ user could reprogram the pin * with real trigger and polarity attributes. */ if (virq >= nr_legacy_irqs() || info->count) info->set = 1; } set_io_apic_irq_attr(&attr, ioapic, hwirq, info->trigger, info->polarity); return io_apic_setup_irq_pin(virq, info->node, &attr); } void mp_irqdomain_unmap(struct irq_domain *domain, unsigned int virq) { struct irq_data *data = irq_get_irq_data(virq); struct irq_cfg *cfg = irq_cfg(virq); int ioapic = mp_irqdomain_ioapic_idx(domain); int pin = (int)data->hwirq; ioapic_mask_entry(ioapic, pin); __remove_pin_from_irq(cfg, ioapic, pin); WARN_ON(!list_empty(&cfg->irq_2_pin)); arch_teardown_hwirq(virq); } static void mp_irqdomain_get_attr(u32 gsi, struct mp_chip_data *data, struct irq_alloc_info *info) { if (info && info->ioapic_valid) { data->trigger = info->ioapic_trigger; data->polarity = info->ioapic_polarity; } else if (acpi_get_override_irq(gsi, &data->trigger, &data->polarity) < 0) { /* PCI interrupts are always polarity one level triggered. */ data->trigger = 1; data->polarity = 1; } } static void mp_setup_entry(struct irq_cfg *cfg, struct mp_chip_data *data, struct IO_APIC_route_entry *entry) { memset(entry, 0, sizeof(*entry)); entry->delivery_mode = apic->irq_delivery_mode; entry->dest_mode = apic->irq_dest_mode; entry->dest = cfg->dest_apicid; entry->vector = cfg->vector; entry->mask = 0; /* enable IRQ */ entry->trigger = data->trigger; entry->polarity = data->polarity; /* * Mask level triggered irqs. * Use IRQ_DELAYED_DISABLE for edge triggered irqs. */ if (data->trigger) entry->mask = 1; } int mp_irqdomain_alloc(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs, void *arg) { int ret, ioapic, pin; struct irq_cfg *cfg; struct irq_data *irq_data; struct mp_chip_data *data; struct irq_alloc_info *info = arg; if (!info || nr_irqs > 1) return -EINVAL; irq_data = irq_domain_get_irq_data(domain, virq); if (!irq_data) return -EINVAL; ioapic = mp_irqdomain_ioapic_idx(domain); pin = info->ioapic_pin; if (irq_find_mapping(domain, (irq_hw_number_t)pin) > 0) return -EEXIST; data = kzalloc(sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; info->ioapic_entry = &data->entry; ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, info); if (ret < 0) { kfree(data); return ret; } irq_data->hwirq = info->ioapic_pin; irq_data->chip = &ioapic_chip; irq_data->chip_data = data; mp_irqdomain_get_attr(mp_pin_to_gsi(ioapic, pin), data, info); cfg = irqd_cfg(irq_data); add_pin_to_irq_node(cfg, info->ioapic_node, ioapic, pin); if (info->ioapic_entry) mp_setup_entry(cfg, data, info->ioapic_entry); mp_register_handler(virq, data->trigger); if (virq < nr_legacy_irqs()) legacy_pic->mask(virq); apic_printk(APIC_VERBOSE, KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i Dest:%d)\n", ioapic, mpc_ioapic_id(ioapic), pin, cfg->vector, virq, data->trigger, data->polarity, cfg->dest_apicid); return 0; } void mp_irqdomain_free(struct irq_domain *domain, unsigned int virq, unsigned int nr_irqs) { struct irq_cfg *cfg = irq_cfg(virq); struct irq_data *irq_data; BUG_ON(nr_irqs != 1); irq_data = irq_domain_get_irq_data(domain, virq); if (irq_data && irq_data->chip_data) { __remove_pin_from_irq(cfg, mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); WARN_ON(!list_empty(&cfg->irq_2_pin)); kfree(irq_data->chip_data); } irq_domain_free_irqs_top(domain, virq, nr_irqs); } void mp_irqdomain_activate(struct irq_domain *domain, struct irq_data *irq_data) { unsigned long flags; struct irq_pin_list *entry; struct mp_chip_data *data = irq_data->chip_data; struct irq_cfg *cfg = irqd_cfg(irq_data); raw_spin_lock_irqsave(&ioapic_lock, flags); for_each_irq_pin(entry, cfg->irq_2_pin) __ioapic_write_entry(entry->apic, entry->pin, data->entry); raw_spin_unlock_irqrestore(&ioapic_lock, flags); } void mp_irqdomain_deactivate(struct irq_domain *domain, struct irq_data *irq_data) { /* It won't be called for IRQ with multiple IOAPIC pins associated */ ioapic_mask_entry(mp_irqdomain_ioapic_idx(domain), (int)irq_data->hwirq); } int mp_set_gsi_attr(u32 gsi, int trigger, int polarity, int node) { int ret = 0; int ioapic, pin; struct mp_pin_info *info; ioapic = mp_find_ioapic(gsi); if (ioapic < 0) return -ENODEV; pin = mp_find_ioapic_pin(ioapic, gsi); info = mp_pin_info(ioapic, pin); trigger = trigger ? 1 : 0; polarity = polarity ? 1 : 0; mutex_lock(&ioapic_mutex); if (!info->set) { info->trigger = trigger; info->polarity = polarity; info->node = node; info->set = 1; } else if (info->trigger != trigger || info->polarity != polarity) { ret = -EBUSY; } mutex_unlock(&ioapic_mutex); return ret; } int mp_irqdomain_ioapic_idx(struct irq_domain *domain) { return (int)(long)domain->host_data; }