/* linux/arch/arm/mach-s3c2410/mach-jive.c * * Copyright 2007 Simtec Electronics * Ben Dooks * * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include static struct map_desc jive_iodesc[] __initdata = { }; #define UCON S3C2410_UCON_DEFAULT #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE #define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE static struct s3c2410_uartcfg jive_uartcfgs[] = { [0] = { .hwport = 0, .flags = 0, .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, }, [1] = { .hwport = 1, .flags = 0, .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, }, [2] = { .hwport = 2, .flags = 0, .ucon = UCON, .ulcon = ULCON, .ufcon = UFCON, } }; /* Jive flash assignment * * 0x00000000-0x00028000 : uboot * 0x00028000-0x0002c000 : uboot env * 0x0002c000-0x00030000 : spare * 0x00030000-0x00200000 : zimage A * 0x00200000-0x01600000 : cramfs A * 0x01600000-0x017d0000 : zimage B * 0x017d0000-0x02bd0000 : cramfs B * 0x02bd0000-0x03fd0000 : yaffs */ static struct mtd_partition jive_imageA_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ { .name = "uboot", .offset = 0, .size = (160 * SZ_1K), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* spare */ { .name = "spare", .offset = (176 * SZ_1K), .size = (16 * SZ_1K), }, #endif /* booted images */ { .name = "kernel (ro)", .offset = (192 * SZ_1K), .size = (SZ_2M) - (192 * SZ_1K), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "root (ro)", .offset = (SZ_2M), .size = (20 * SZ_1M), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* yaffs */ { .name = "yaffs", .offset = (44 * SZ_1M), .size = (20 * SZ_1M), }, /* bootloader environment */ { .name = "env", .offset = (160 * SZ_1K), .size = (16 * SZ_1K), }, /* upgrade images */ { .name = "zimage", .offset = (22 * SZ_1M), .size = (2 * SZ_1M) - (192 * SZ_1K), }, { .name = "cramfs", .offset = (24 * SZ_1M) - (192*SZ_1K), .size = (20 * SZ_1M), }, }; static struct mtd_partition jive_imageB_nand_part[] = { #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER /* Don't allow access to the bootloader from linux */ { .name = "uboot", .offset = 0, .size = (160 * SZ_1K), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* spare */ { .name = "spare", .offset = (176 * SZ_1K), .size = (16 * SZ_1K), }, #endif /* booted images */ { .name = "kernel (ro)", .offset = (22 * SZ_1M), .size = (2 * SZ_1M) - (192 * SZ_1K), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, { .name = "root (ro)", .offset = (24 * SZ_1M) - (192 * SZ_1K), .size = (20 * SZ_1M), .mask_flags = MTD_WRITEABLE, /* force read-only */ }, /* yaffs */ { .name = "yaffs", .offset = (44 * SZ_1M), .size = (20 * SZ_1M), }, /* bootloader environment */ { .name = "env", .offset = (160 * SZ_1K), .size = (16 * SZ_1K), }, /* upgrade images */ { .name = "zimage", .offset = (192 * SZ_1K), .size = (2 * SZ_1M) - (192 * SZ_1K), }, { .name = "cramfs", .offset = (2 * SZ_1M), .size = (20 * SZ_1M), }, }; static struct s3c2410_nand_set jive_nand_sets[] = { [0] = { .name = "flash", .nr_chips = 1, .nr_partitions = ARRAY_SIZE(jive_imageA_nand_part), .partitions = jive_imageA_nand_part, }, }; static struct s3c2410_platform_nand jive_nand_info = { /* set taken from osiris nand timings, possibly still conservative */ .tacls = 30, .twrph0 = 55, .twrph1 = 40, .sets = jive_nand_sets, .nr_sets = ARRAY_SIZE(jive_nand_sets), }; static int __init jive_mtdset(char *options) { struct s3c2410_nand_set *nand = &jive_nand_sets[0]; unsigned long set; if (options == NULL || options[0] == '\0') return 0; if (strict_strtoul(options, 10, &set)) { printk(KERN_ERR "failed to parse mtdset=%s\n", options); return 0; } switch (set) { case 1: nand->nr_partitions = ARRAY_SIZE(jive_imageB_nand_part); nand->partitions = jive_imageB_nand_part; case 0: /* this is already setup in the nand info */ break; default: printk(KERN_ERR "Unknown mtd set %ld specified," "using default.", set); } return 0; } /* parse the mtdset= option given to the kernel command line */ __setup("mtdset=", jive_mtdset); /* LCD timing and setup */ #define LCD_XRES (240) #define LCD_YRES (320) #define LCD_LEFT_MARGIN (12) #define LCD_RIGHT_MARGIN (12) #define LCD_LOWER_MARGIN (12) #define LCD_UPPER_MARGIN (12) #define LCD_VSYNC (2) #define LCD_HSYNC (2) #define LCD_REFRESH (60) #define LCD_HTOT (LCD_HSYNC + LCD_LEFT_MARGIN + LCD_XRES + LCD_RIGHT_MARGIN) #define LCD_VTOT (LCD_VSYNC + LCD_LOWER_MARGIN + LCD_YRES + LCD_UPPER_MARGIN) struct s3c2410fb_display jive_vgg2432a4_display[] = { [0] = { .width = LCD_XRES, .height = LCD_YRES, .xres = LCD_XRES, .yres = LCD_YRES, .left_margin = LCD_LEFT_MARGIN, .right_margin = LCD_RIGHT_MARGIN, .upper_margin = LCD_UPPER_MARGIN, .lower_margin = LCD_LOWER_MARGIN, .hsync_len = LCD_HSYNC, .vsync_len = LCD_VSYNC, .pixclock = (1000000000000LL / (LCD_REFRESH * LCD_HTOT * LCD_VTOT)), .bpp = 16, .type = (S3C2410_LCDCON1_TFT16BPP | S3C2410_LCDCON1_TFT), .lcdcon5 = (S3C2410_LCDCON5_FRM565 | S3C2410_LCDCON5_INVVLINE | S3C2410_LCDCON5_INVVFRAME | S3C2410_LCDCON5_INVVDEN | S3C2410_LCDCON5_PWREN), }, }; /* todo - put into gpio header */ #define S3C2410_GPCCON_MASK(x) (3 << ((x) * 2)) #define S3C2410_GPDCON_MASK(x) (3 << ((x) * 2)) struct s3c2410fb_mach_info jive_lcd_config = { .displays = jive_vgg2432a4_display, .num_displays = ARRAY_SIZE(jive_vgg2432a4_display), .default_display = 0, /* Enable VD[2..7], VD[10..15], VD[18..23] and VCLK, syncs, VDEN * and disable the pull down resistors on pins we are using for LCD * data. */ .gpcup = (0xf << 1) | (0x3f << 10), .gpccon = (S3C2410_GPC1_VCLK | S3C2410_GPC2_VLINE | S3C2410_GPC3_VFRAME | S3C2410_GPC4_VM | S3C2410_GPC10_VD2 | S3C2410_GPC11_VD3 | S3C2410_GPC12_VD4 | S3C2410_GPC13_VD5 | S3C2410_GPC14_VD6 | S3C2410_GPC15_VD7), .gpccon_mask = (S3C2410_GPCCON_MASK(1) | S3C2410_GPCCON_MASK(2) | S3C2410_GPCCON_MASK(3) | S3C2410_GPCCON_MASK(4) | S3C2410_GPCCON_MASK(10) | S3C2410_GPCCON_MASK(11) | S3C2410_GPCCON_MASK(12) | S3C2410_GPCCON_MASK(13) | S3C2410_GPCCON_MASK(14) | S3C2410_GPCCON_MASK(15)), .gpdup = (0x3f << 2) | (0x3f << 10), .gpdcon = (S3C2410_GPD2_VD10 | S3C2410_GPD3_VD11 | S3C2410_GPD4_VD12 | S3C2410_GPD5_VD13 | S3C2410_GPD6_VD14 | S3C2410_GPD7_VD15 | S3C2410_GPD10_VD18 | S3C2410_GPD11_VD19 | S3C2410_GPD12_VD20 | S3C2410_GPD13_VD21 | S3C2410_GPD14_VD22 | S3C2410_GPD15_VD23), .gpdcon_mask = (S3C2410_GPDCON_MASK(2) | S3C2410_GPDCON_MASK(3) | S3C2410_GPDCON_MASK(4) | S3C2410_GPDCON_MASK(5) | S3C2410_GPDCON_MASK(6) | S3C2410_GPDCON_MASK(7) | S3C2410_GPDCON_MASK(10) | S3C2410_GPDCON_MASK(11)| S3C2410_GPDCON_MASK(12) | S3C2410_GPDCON_MASK(13)| S3C2410_GPDCON_MASK(14) | S3C2410_GPDCON_MASK(15)), }; static struct platform_device *jive_devices[] __initdata = { &s3c_device_usb, &s3c_device_rtc, &s3c_device_wdt, &s3c_device_i2c, &s3c_device_lcd, &s3c_device_nand, &s3c_device_usbgadget, }; static struct s3c2410_udc_mach_info jive_udc_cfg __initdata = { .vbus_pin = S3C2410_GPG1, /* detect is on GPG1 */ }; /* Jive power management device */ #ifdef CONFIG_PM static int jive_pm_suspend(struct sys_device *sd, pm_message_t state) { /* Write the magic value u-boot uses to check for resume into * the INFORM0 register, and ensure INFORM1 is set to the * correct address to resume from. */ __raw_writel(0x2BED, S3C2412_INFORM0); __raw_writel(virt_to_phys(s3c2410_cpu_resume), S3C2412_INFORM1); return 0; } static int jive_pm_resume(struct sys_device *sd) { __raw_writel(0x0, S3C2412_INFORM0); return 0; } #else #define jive_pm_suspend NULL #define jive_pm_resume NULL #endif static struct sysdev_class jive_pm_sysclass = { .name = "jive-pm", .suspend = jive_pm_suspend, .resume = jive_pm_resume, }; static struct sys_device jive_pm_sysdev = { .cls = &jive_pm_sysclass, }; static void __init jive_map_io(void) { s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc)); s3c24xx_init_clocks(12000000); s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs)); } static void __init jive_machine_init(void) { /* register system devices for managing low level suspend */ sysdev_class_register(&jive_pm_sysclass); sysdev_register(&jive_pm_sysdev); /* write our sleep configurations for the IO. Pull down all unused * IO, ensure that we have turned off all peripherals we do not * need, and configure the ones we do need. */ /* Port B sleep */ __raw_writel(S3C2412_SLPCON_IN(0) | S3C2412_SLPCON_PULL(1) | S3C2412_SLPCON_HIGH(2) | S3C2412_SLPCON_PULL(3) | S3C2412_SLPCON_PULL(4) | S3C2412_SLPCON_PULL(5) | S3C2412_SLPCON_PULL(6) | S3C2412_SLPCON_HIGH(7) | S3C2412_SLPCON_PULL(8) | S3C2412_SLPCON_PULL(9) | S3C2412_SLPCON_PULL(10), S3C2412_GPBSLPCON); /* Port C sleep */ __raw_writel(S3C2412_SLPCON_PULL(0) | S3C2412_SLPCON_PULL(1) | S3C2412_SLPCON_PULL(2) | S3C2412_SLPCON_PULL(3) | S3C2412_SLPCON_PULL(4) | S3C2412_SLPCON_PULL(5) | S3C2412_SLPCON_LOW(6) | S3C2412_SLPCON_PULL(6) | S3C2412_SLPCON_PULL(7) | S3C2412_SLPCON_PULL(8) | S3C2412_SLPCON_PULL(9) | S3C2412_SLPCON_PULL(10) | S3C2412_SLPCON_PULL(11) | S3C2412_SLPCON_PULL(12) | S3C2412_SLPCON_PULL(13) | S3C2412_SLPCON_PULL(14) | S3C2412_SLPCON_PULL(15), S3C2412_GPCSLPCON); /* Port D sleep */ __raw_writel(S3C2412_SLPCON_ALL_PULL, S3C2412_GPDSLPCON); /* Port F sleep */ __raw_writel(S3C2412_SLPCON_LOW(0) | S3C2412_SLPCON_LOW(1) | S3C2412_SLPCON_LOW(2) | S3C2412_SLPCON_EINT(3) | S3C2412_SLPCON_EINT(4) | S3C2412_SLPCON_EINT(5) | S3C2412_SLPCON_EINT(6) | S3C2412_SLPCON_EINT(7), S3C2412_GPFSLPCON); /* Port G sleep */ __raw_writel(S3C2412_SLPCON_IN(0) | S3C2412_SLPCON_IN(1) | S3C2412_SLPCON_IN(2) | S3C2412_SLPCON_IN(3) | S3C2412_SLPCON_IN(4) | S3C2412_SLPCON_IN(5) | S3C2412_SLPCON_IN(6) | S3C2412_SLPCON_IN(7) | S3C2412_SLPCON_PULL(8) | S3C2412_SLPCON_PULL(9) | S3C2412_SLPCON_IN(10) | S3C2412_SLPCON_PULL(11) | S3C2412_SLPCON_PULL(12) | S3C2412_SLPCON_PULL(13) | S3C2412_SLPCON_IN(14) | S3C2412_SLPCON_PULL(15), S3C2412_GPGSLPCON); /* Port H sleep */ __raw_writel(S3C2412_SLPCON_PULL(0) | S3C2412_SLPCON_PULL(1) | S3C2412_SLPCON_PULL(2) | S3C2412_SLPCON_PULL(3) | S3C2412_SLPCON_PULL(4) | S3C2412_SLPCON_PULL(5) | S3C2412_SLPCON_PULL(6) | S3C2412_SLPCON_IN(7) | S3C2412_SLPCON_IN(8) | S3C2412_SLPCON_PULL(9) | S3C2412_SLPCON_IN(10), S3C2412_GPHSLPCON); /* initialise the power management now we've setup everything. */ s3c2410_pm_init(); s3c_device_nand.dev.platform_data = &jive_nand_info; /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ s3c2410_modify_misccr(S3C2410_MISCCR_USBHOST | S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); s3c24xx_udc_set_platdata(&jive_udc_cfg); s3c24xx_fb_set_platdata(&jive_lcd_config); platform_add_devices(jive_devices, ARRAY_SIZE(jive_devices)); } MACHINE_START(JIVE, "JIVE") /* Maintainer: Ben Dooks */ .phys_io = S3C2410_PA_UART, .io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc, .boot_params = S3C2410_SDRAM_PA + 0x100, .init_irq = s3c24xx_init_irq, .map_io = jive_map_io, .init_machine = jive_machine_init, .timer = &s3c24xx_timer, MACHINE_END