Impact: fix to possible alignment problems on some archs.

Some arch compilers include an NULL char array in the sizeof field.
Since the ring_buffer_event type includes one of these, it is better
to use the "offsetof" instead, to avoid strange bugs on these archs.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The ring_buffer_read_page was broken if it were to only copy part
of the page. This patch fixes that up as well as adds a parameter
to allow a length field, in order to only copy part of the buffer page.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix ring_buffer_read_page

After a page is swapped into the ring buffer, the write field must
also be reset.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The registering of events had the return value check backwards.
A zero returned is success, the check had it as a failure.

This patch also fixes a missing "\n" in the warning that the check
failed.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The current definition of CALLER_ADDRx isn't suitable for all platforms.
E.g. for ARM __builtin_return_address(N) doesn't work for N > 0 and
AFAIK for powerpc there are no frame pointers needed to have a working
__builtin_return_address.  This patch allows defining the CALLER_ADDRx
macros in <asm/ftrace.h> and let these take precedence.

Because now <asm/ftrace.h> is included unconditionally in
<linux/ftrace.h> all archs that don't already had this include get an
empty one for free.
Signed-off-by: NUwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@elte.hu>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch adds the internal print format used to print the raw events
to the event trace point format file.

 # cat /debug/tracing/events/sched/sched_switch/format
name: sched_switch
ID: 29
format:
        field:unsigned char type;       offset:0;       size:1;
        field:unsigned char flags;      offset:1;       size:1;
        field:unsigned char preempt_count;      offset:2;       size:1;
        field:int pid;  offset:4;       size:4;
        field:int tgid; offset:8;       size:4;

        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

print fmt: "prev %d:%d ==> next %s:%d:%d"
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

To be able to identify the trace in the binary format output, the
id of the trace event (which is dynamically assigned) must also be listed.

This patch adds the name of the trace point as well as the id assigned.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch includes the ftrace header to the event formats files:

 # cat /debug/tracing/events/sched/sched_switch/format
        field:unsigned char type;       offset:0;       size:1;
        field:unsigned char flags;      offset:1;       size:1;
        field:unsigned char preempt_count;      offset:2;       size:1;
        field:int pid;  offset:4;       size:4;
        field:int tgid; offset:8;       size:4;

        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

A blank line is used as a deliminator between the ftrace header and the
trace point fields.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch adds the "format" file to the trace point event directory.
This is based off of work by Tom Zanussi, in which a file is exported
to be tread from user land such that a user space app may read the
binary record stored in the ring buffer.

 # cat /debug/tracing/events/sched/sched_switch/format
        field:pid_t prev_pid;   offset:12;      size:4;
        field:int prev_prio;    offset:16;      size:4;
        field special:char next_comm[TASK_COMM_LEN];    offset:20;      size:16;
        field:pid_t next_pid;   offset:36;      size:4;
        field:int next_prio;    offset:40;      size:4;

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

The trace_seq functions may be used separately outside of the ftrace
iterator. The trace_seq_reset is needed for these operations.

This patch also renames trace_seq_reset to the more appropriate
trace_seq_init.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

The trace event objects are currently not proctected against
reentrancy. This patch adds a mutex around the modifications of
the trace event fields.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Tom Zanussi pointed out that the simple TRACE_FIELD was not enough to
record trace data that required memcpy. This patch addresses this issue
by adding a TRACE_FIELD_SPECIAL. The format is similar to TRACE_FIELD
but looks like so:

  TRACE_FIELD_SPECIAL(type_item, item, cmd)

What TRACE_FIELD gave was:

  TRACE_FIELD(type, item, assign)

The TRACE_FIELD would be used in declaring a structure:

  struct {
	type	item;
  };

And later assign it via:

  entry->item = assign;

What TRACE_FIELD_SPECIAL gives us is:

In the declaration of the structure:

  struct {
	type_item;
  };

And the assignment:

  cmd;

This change log will explain the one example used in the patch:

 TRACE_EVENT_FORMAT(sched_switch,
	TPPROTO(struct rq *rq, struct task_struct *prev,
		struct task_struct *next),
	TPARGS(rq, prev, next),
	TPFMT("task %s:%d ==> %s:%d",
	      prev->comm, prev->pid, next->comm, next->pid),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, prev_pid, prev->pid)
		TRACE_FIELD(int, prev_prio, prev->prio)
		TRACE_FIELD_SPECIAL(char next_comm[TASK_COMM_LEN],
				    next_comm,
				    TPCMD(memcpy(TRACE_ENTRY->next_comm,
						 next->comm,
						 TASK_COMM_LEN)))
		TRACE_FIELD(pid_t, next_pid, next->pid)
		TRACE_FIELD(int, next_prio, next->prio)
	),
	TPRAWFMT("prev %d:%d ==> next %s:%d:%d")
	);

 The struct will be create as:

  struct {
	pid_t		prev_pid;
	int		prev_prio;
	char next_comm[TASK_COMM_LEN];
	pid_t		next_pid;
	int		next_prio;
  };

Note the TRACE_ENTRY in the cmd part of TRACE_SPECIAL. TRACE_ENTRY will
be set by the tracer to point to the structure inside the trace buffer.

  entry->prev_pid	= prev->pid;
  entry->prev_prio	= prev->prio;
  memcpy(entry->next_comm, next->comm, TASK_COMM_LEN);
  entry->next_pid	= next->pid;
  entry->next_prio	= next->prio
Reported-by: NTom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the irq subsystem trace points.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch utilizes the TRACE_EVENT_FORMAT macro to enable the C style
faster tracing for the sched subsystem trace points.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch adds the interface to enable the C style trace points.
In the directory /debugfs/tracing/events/subsystem/event
We now have three files:

 enable : values 0 or 1 to enable or disable the trace event.

 available_types: values 'raw' and 'printf' which indicate the tracing
       types available for the trace point. If a developer does not
       use the TRACE_EVENT_FORMAT macro and just uses the TRACE_FORMAT
       macro, then only 'printf' will be available. This file is
       read only.

 type: values 'raw' or 'printf'. This indicates which type of tracing
       is active for that trace point. 'printf' is the default and
       if 'raw' is not available, this file is read only.

 # echo raw > /debug/tracing/events/sched/sched_wakeup/type
 # echo 1 > /debug/tracing/events/sched/sched_wakeup/enable

 Will enable the C style tracing for the sched_wakeup trace point.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: lower overhead tracing

The current event tracer can automatically pick up trace points
that are registered with the TRACE_FORMAT macro. But it required
a printf format string and parsing. Although, this adds the ability
to get guaranteed information like task names and such, it took
a hit in overhead processing. This processing can add about 500-1000
nanoseconds overhead, but in some cases that too is considered
too much and we want to shave off as much from this overhead as
possible.

Tom Zanussi recently posted tracing patches to lkml that are based
on a nice idea about capturing the data via C structs using
STRUCT_ENTER, STRUCT_EXIT type of macros.

I liked that method very much, but did not like the implementation
that required a developer to add data/code in several disjoint
locations.

This patch extends the event_tracer macros to do a similar "raw C"
approach that Tom Zanussi did. But instead of having the developers
needing to tweak a bunch of code all over the place, they can do it
all in one macro - preferably placed near the code that it is
tracing. That makes it much more likely that tracepoints will be
maintained on an ongoing basis by the code they modify.

The new macro TRACE_EVENT_FORMAT is created for this approach. (Note,
a developer may still utilize the more low level DECLARE_TRACE macros
if they don't care about getting their traces automatically in the event
tracer.)

They can also use the existing TRACE_FORMAT if they don't need to code
the tracepoint in C, but just want to use the convenience of printf.

So if the developer wants to "hardwire" a tracepoint in the fastest
possible way, and wants to acquire their data via a user space utility
in a raw binary format, or wants to see it in the trace output but not
sacrifice any performance, then they can implement the faster but
more complex TRACE_EVENT_FORMAT macro.

Here's what usage looks like:

  TRACE_EVENT_FORMAT(name,
	TPPROTO(proto),
	TPARGS(args),
	TPFMT(fmt, fmt_args),
	TRACE_STUCT(
		TRACE_FIELD(type1, item1, assign1)
		TRACE_FIELD(type2, item2, assign2)
			[...]
	),
	TPRAWFMT(raw_fmt)
	);

Note name, proto, args, and fmt, are all identical to what TRACE_FORMAT
uses.

 name: is the unique identifier of the trace point
 proto: The proto type that the trace point uses
 args: the args in the proto type
 fmt: printf format to use with the event printf tracer
 fmt_args: the printf argments to match fmt

 TRACE_STRUCT starts the ability to create a structure.
 Each item in the structure is defined with a TRACE_FIELD

  TRACE_FIELD(type, item, assign)

 type: the C type of item.
 item: the name of the item in the stucture
 assign: what to assign the item in the trace point callback

 raw_fmt is a way to pretty print the struct. It must match
  the order of the items are added in TRACE_STUCT

 An example of this would be:

 TRACE_EVENT_FORMAT(sched_wakeup,
	TPPROTO(struct rq *rq, struct task_struct *p, int success),
	TPARGS(rq, p, success),
	TPFMT("task %s:%d %s",
	      p->comm, p->pid, success?"succeeded":"failed"),
	TRACE_STRUCT(
		TRACE_FIELD(pid_t, pid, p->pid)
		TRACE_FIELD(int, success, success)
	),
	TPRAWFMT("task %d success=%d")
	);

 This creates us a unique struct of:

 struct {
	pid_t		pid;
	int		success;
 };

 And the way the call back would assign these values would be:

	entry->pid = p->pid;
	entry->success = success;

The nice part about this is that the creation of the assignent is done
via macro magic in the event tracer.  Once the TRACE_EVENT_FORMAT is
created, the developer will then have a faster method to record
into the ring buffer. They do not need to worry about the tracer itself.

The developer would only need to touch the files in include/trace/*.h

Again, I would like to give special thanks to Tom Zanussi for this
nice idea.

Idea-from: Tom Zanussi <tzanussi@gmail.com>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Right now all tracers must manage their own trace buffers. This was
to enforce tracers to be independent in case we finally decide to
allow each tracer to have their own trace buffer.

But now we are adding event tracing that writes to the current tracer's
buffer. This adds an interface to allow events to write to the current
tracer buffer without having to manage its own. Since event tracing
has no "tracer", and is just a way to hook into any other tracer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Add the TRACE_SYSTEM sched for the sched events.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Add the TRACE_SYSTEM irq for the irq events.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch makes the event files, set_event and available_events
aware of the subsystem.

Now you can enable an entire subsystem with:

  echo 'irq:*' > set_event

Note: the '*' is not needed.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

If a trace point header defines TRACE_SYSTEM, then it will add the
following trace points into that event system.

If include/trace/irq_event_types.h has:

 #define TRACE_SYSTEM irq

at the top and

 #undef TRACE_SYSTEM

at the bottom, then a directory "irq" will be created in the
/debug/tracing/events directory. Inside that directory will contain the
two trace points that are defined in include/trace/irq_event_types.h.

Only adding the above to irq and not to sched, we get:

 # ls /debug/tracing/events/
irq                     sched_process_exit  sched_signal_send  sched_wakeup_new
sched_kthread_stop      sched_process_fork  sched_switch
sched_kthread_stop_ret  sched_process_free  sched_wait_task
sched_migrate_task      sched_process_wait  sched_wakeup

 # ls /debug/tracing/events/irq
irq_handler_entry  irq_handler_exit

If we add #define TRACE_SYSTEM sched to the trace/sched_event_types.h
then the rest of the trace events will be put in a sched directory
within the events directory.

I've been playing with this idea of the subsystem for a while, but
recently Tom Zanussi posted some patches to lkml that included this
method. Tom's approach was clean and got me to finally put some effort
to clean up the event trace points.

Thanks to Tom Zanussi for demonstrating how nice the subsystem
method is.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

To further facilitate the ease of adding trace points for developers, this
patch creates include/trace/trace_events.h and
include/trace/trace_event_types.h.

The former file will hold the trace/<type>.h files and the latter will hold
the trace/<type>_event_types.h files.

To create new tracepoints and to have them automatically
appear in the event tracer, a developer makes the trace/<type>.h file
which includes <linux/tracepoint.h> and the trace/<type>_event_types.h file.

The trace/<type>_event_types.h file will hold the TRACE_FORMAT
macros.

Then add the trace/<type>.h file to trace/trace_events.h,
and add the trace/<type>_event_types.h to the trace_event_types.h file.

No need to modify files elsewhere.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

kcalloc is a better approach to allocate a NULL array.
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: clean up

Instead of listing the trace options like:

 # cat /debug/tracing/trace_options
print-parent nosym-offset nosym-addr noverbose noraw nohex nobin noblock nostacktrace nosched-tree ftrace_printk noftrace_preempt nobranch annotate nouserstacktrace nosym-userobj

We now list them like:

 # cat /debug/tracing/trace_options
print-parent
nosym-offset
nosym-addr
noverbose
noraw
nohex
nobin
noblock
nostacktrace
nosched-tree
ftrace_printk
noftrace_preempt
nobranch
annotate
nouserstacktrace
nosym-userobj
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix compile warning and clean up

When I first wrote __tracing_open, instead of passing the error
code via the ERR_PTR macros, I lazily used a separate parameter
to hold the return for errors.

When Frederic Weisbecker updated that function, he used the Linux
kernel ERR_PTR for the returns. This caused the parameter return
to possibly not be initialized on error. gcc correctly pointed this
out with a warning.

This patch converts the entire function to use the Linux kernel
ERR_PTR macro methods.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix to possible race conditions

There's some uses of current_tracer that is not protected by the
trace_types_lock. There is a small chance that a sysadmin changes
the tracer while the current_tracer is being referenced.

If the race is hit, it is unlikely to cause any harm since the
tracers are constant and are not freed. But some strang side
effects may occur.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch adds the tracer dependent options dynamically to the
options directory when the tracer is activated. These options are
removed when the tracer is deactivated.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

This patch creates an options directory in the debugfs, that contains
the available tracing options. These files contain 1 or 0, where 1
is the option is enabled and 0 it is disabled.

Simply echoing in 1 will enable the option and 0 will disable it.
This patch only contains the core options, not the tracer options.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Conflicts:
	kernel/sched_clock.c

If the TSC is constant and non-stop, also set it reliable.

(We will turn this off in DMI quirks for multi-chassis systems)

The performance number on a 16-way Nehalem system running
32 tasks that context-switch between each other is significant:

   sched_clock_stable=0		sched_clock_stable=1
   ....................         ....................
   22.456925 million/sec        24.306972 million/sec   [+8.2%]

lmbench's "lat_ctx -s 0 2" goes from 0.63 microseconds to
0.59 microseconds - a 6.7% increase in context-switching
performance.

Perfstat of 1 million pipe context switches between two tasks:

 Performance counter stats for './pipe-test-1m':

       [before]           [after]
   ............      ............
   37621.421089      36436.848378    task clock ticks     (msecs)

              0                 0    CPU migrations       (events)
        2000274           2000189    context switches     (events)
            194               193    pagefaults           (events)
     8433799643        8171016416    CPU cycles           (events) -3.21%
     8370133368        8180999694    instructions         (events) -2.31%
        4158565           3895941    cache references     (events) -6.74%
          44312             46264    cache misses         (events)

    2349.287976       2279.362465    wall-time            (msecs)  -3.06%

The speedup comes straight from the reduction in the instruction
count. sched_clock_cpu() got simpler and the whole workload thus
executes faster.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Allow CONFIG_HAVE_UNSTABLE_SCHED_CLOCK architectures to still specify
that their sched_clock() implementation is reliable.

This will be used by x86 to switch on a faster sched_clock_cpu()
implementation on certain CPU types.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: implement new tracing timestamp APIs

Add three trace clock variants, with differing scalability/precision
tradeoffs:

 -   local: CPU-local trace clock
 -  medium: scalable global clock with some jitter
 -  global: globally monotonic, serialized clock

Make the ring-buffer use the local trace clock internally.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

make sure we dont execute more complex sched_clock() code in NMI context.
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new tracepoints

Add them to the generic IRQ code, that way every architecture
gets these new tracepoints, not just x86.

Using Steve's new 'TRACE_FORMAT', I can get function graph
trace as follows using the original two IRQ tracepoints:

 3)               |    handle_IRQ_event() {
 3)               |    /* (irq_handler_entry) irq=28 handler=eth0 */
 3)               |    e1000_intr_msi() {
 3)   2.460 us    |      __napi_schedule();
 3)   9.416 us    |    }
 3)               |    /* (irq_handler_exit) irq=28 handler=eth0 return=handled */
 3) + 22.935 us   |  }
Signed-off-by: NJason Baron <jbaron@redhat.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NMasami Hiramatsu <mhiramat@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: restructure the VFS layout of per CPU trace buffers

The per cpu trace files are all in a single directory:
/debug/tracing/per_cpu. In case of a large number of cpu, the
content of this directory becomes messy so we create now one
directory per cpu inside /debug/tracing/per_cpu which contain
each their own trace_pipe and trace files.

Ie:

 /debug/tracing$ ls -R per_cpu
 per_cpu:
 cpu0  cpu1

 per_cpu/cpu0:
 trace  trace_pipe

 per_cpu/cpu1:
 trace  trace_pipe
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'tip/tracing/ftrace' of ssh://master.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into tracing/ftrace

Peter Zijlstra warned that TPPROTO and TPARGS might become something
other than a simple copy of itself. To prevent this from having
side effects in the TRACE_FORMAT macro in tracepoint.h, we add a
PARAMS() macro to be defined as just a wrapper.
Reported-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

There's been a bit confusion to whether DEFINE/DECLARE_TRACE_FMT should
be a DEFINE or a DECLARE. Ingo Molnar suggested simply calling it
TRACE_FORMAT.
Reported-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Now that several per-cpu files can be read or spliced at the
same, we want the read/splice callbacks for tracing files to be
reentrants.

Until now, a single global mutex (trace_types_lock) serialized
the access to tracing_read_pipe(), tracing_splice_read_pipe(),
and the seq helpers.

Ie: it means that if a user tries to read trace_pipe0 and
trace_pipe1 at the same time, the access to the function
tracing_read_pipe() is contended and one reader must wait for
the other to finish its read call.

The trace_type_lock mutex is mostly here to serialize the access
to the global current tracer (current_trace), which can be
changed concurrently. Although the iter struct keeps a private
pointer to this tracer, its callbacks can be changed by another
function.

The method used here is to not keep anymore private reference to
the tracer inside the iterator but to make a copy of it inside
the iterator. Then it checks on subsequents read calls if the
tracer has changed. This is not costly because the current
tracer is not expected to be changed often, so we use a branch
prediction for that.

Moreover, we add a private mutex to the iterator (there is one
iterator per file descriptor) to serialize the accesses in case
of multiple consumers per file descriptor (which would be a
silly idea from the user). Note that this is not to protect the
ring buffer, since the ring buffer already serializes the
readers accesses. This is to prevent from traces weirdness in
case of concurrent consumers. But these mutexes can be dropped
anyway, that would not result in any crash. Just tell me what
you think about it.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>