- 03 7月, 2018 1 次提交
-
-
由 Fabio Estevam 提交于
Select CONFIG_USB_CHIPIDEA_ULPI and CONFIG_USB_ULPI_BUS so that USB ULPI can be functional on some boards like that use ULPI interface. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 26 3月, 2018 2 次提交
-
-
由 Fabio Estevam 提交于
fsl-asoc-card machine driver also supports sgtl5000, so use it favor of the imx-sgtl5000 machine driver, which will be probably be removed in the future. Tested on a imx25-pdk board. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Fabio Estevam 提交于
Re-sync the defconfig by doing: make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig So keep it in sync to help further changes in defconfig. Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 11 6月, 2017 1 次提交
-
-
由 Krzysztof Kozlowski 提交于
Remove old, dead Kconfig options (in order appearing in this commit): - EXPERIMENTAL is gone since v3.9; - INET_LRO: commit 7bbf3cae ("ipv4: Remove inet_lro library"); - MTD_CONCAT: commit f53fdebc ("mtd: drop MTD_CONCAT from Kconfig entirely"); - MTD_PARTITIONS: commit 6a8a98b2 ("mtd: kill CONFIG_MTD_PARTITIONS"); - MTD_CHAR: commit 660685d9 ("mtd: merge mtdchar module with mtdcore"); - NETDEV_1000 and NETDEV_10000: commit f860b052 ("drivers/net: Kconfig and Makefile cleanup"); NET_ETHERNET should be replaced with just ETHERNET but that is separate change; - INOTIFY: commit 2dfc1cae ("inotify: remove inotify in kernel interface"); - MISC_DEVICES: commit 7c5763b8 ("drivers: misc: Remove MISC_DEVICES config option"); - HID_SUPPORT: commit 1f41a6a9 ("HID: Fix the generic Kconfig options"); - BT_L2CAP and BT_SCO: commit f1e91e16 ("Bluetooth: Always compile SCO and L2CAP in Bluetooth Core"); - DEBUG_ERRORS: commit b025a3f8 ("ARM: 6876/1: Kconfig.debug: Remove unused CONFIG_DEBUG_ERRORS"); - USB_DEVICE_CLASS: commit 007bab91 ("USB: remove CONFIG_USB_DEVICE_CLASS"); - RCU_CPU_STALL_DETECTOR: commit a00e0d71 ("rcu: Remove conditional compilation for RCU CPU stall warnings"); - SYSCTL_SYSCALL_CHECK: commit 7c60c48f ("sysctl: Improve the sysctl sanity checks"); - IP_NF_QUEUE: commit 3dd6664f ("netfilter: remove unused "config IP_NF_QUEUE""); - IP_NF_TARGET_ULOG: commit d4da843e ("netfilter: kill remnants of ulog targets"); - IP6_NF_QUEUE: commit d16cf20e ("netfilter: remove ip_queue support"); - IP6_NF_TARGET_LOG: commit 6939c33a ("netfilter: merge ipt_LOG and ip6_LOG into xt_LOG"); - USB_LED: commit a335aaf3 ("usb: misc: remove outdated USB LED driver"); - MMC_UNSAFE_RESUME: commit 2501c917 ("mmc: core: Use MMC_UNSAFE_RESUME as default behavior"); - AUTOFS_FS: commit 561c5cf9 ("staging: Remove autofs3"); - DISPLAY_SUPPORT: commit 5a6b5e02 ("fbdev: remove display subsystem"); - CFG80211_REG_DEBUG: commit c799ba6e ("cfg80211: remove CFG80211_REG_DEBUG"); - VIDEO_OUTPUT_CONTROL: commit f167a64e ("video / output: Drop display output class support"); - USB_LIBUSUAL: commit f61870ee ("usb: remove libusual"); - CRYPTO_ZLIB: commit 11049218 ("crypto: compress - remove unused pcomp interface"); - BLK_DEV_UB: commit 68a5059e ("block: remove the deprecated ub driver"); Signed-off-by: NKrzysztof Kozlowski <krzk@kernel.org> [for vexpress] Acked-by: NLiviu Dudau <liviu.dudau@arm.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 09 8月, 2016 3 次提交
-
-
由 Alexander Shiyan 提交于
This patch moves SOC_IMX1 into 'Device tree only' category and renames imx1-dt.c to mach-imx1.c to align with the name schema of other i.MX DT only platforms. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Alexander Shiyan 提交于
Synertronixx SCB9328 board is very similar to Armadeus APF9328, so it can be easily reimplemented in DT way. This patch removes support for non-DT support for this board. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Alexander Shiyan 提交于
mach-apf9328.c can be replaced with devicetree equivalent: imx1-apf9328.dts, so remove the board file. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 01 3月, 2016 2 次提交
-
-
由 Jan Luebbe 提交于
This makes it possible to automatically boot-test this defconfig with kernelci.org. Signed-off-by: NJan Luebbe <jlu@pengutronix.de> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
由 Jan Luebbe 提交于
Regenerate imx_v4_v5_defconfig by running: make imx_v4_v5_defconfig - Manually disable EXT2_FS and EXT3_FS make savedefconfig mv defconfig arch/arm/configs/imx_v4_v5_defconfig Signed-off-by: NJan Luebbe <jlu@pengutronix.de> Signed-off-by: NMichael Grzeschik <m.grzeschik@pengutronix.de> Signed-off-by: NShawn Guo <shawnguo@kernel.org>
-
- 14 2月, 2016 1 次提交
-
-
由 Denis Carikli 提交于
Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NMarkus Pargmann <mpa@pengutronix.de>
-
- 13 3月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
We do not have CONFIG_MACH_MX25_3DS platform anymore, so update the defconfig. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 11 3月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
As there is no more mx25 board files, we can turn mx25 into a dt-only platform. Rename imx25-dt.c to mach-imx25.c to be consistent with the other i.MX SoCs. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 02 3月, 2015 1 次提交
-
-
由 Fabio Estevam 提交于
Select CONFIG_VFAT_FS by default. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 04 11月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
Since 64546e9f ("ARM: imx_v6_v7_defconfig updates") and commit 0650f855 ("ARM: imx_v4_v5_defconfig: Select CONFIG_IMX_WEIM") CONFIG_SPI selection was dropped by savedefconfig for imx_v4_v5_defconfig and imx_v6_v7_defconfig. In order to keep the same behaviour as previous kernel versions and avoid regressions, let's add CONFIG_SPI option back. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 16 9月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
The imx weim driver is used by some mx27/mx1 boards, so let's enable it by default. Generated this patch by doing: - make imx_v4_v5_defconfig - make menuconfig and manually select CONFIG_IMX_WEIM - make savedefconfig - cp defconfig arch/arm/configs/imx_v4_v5_defconfig ,which results in some additional cleanups. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 01 9月, 2014 3 次提交
-
-
由 Alexander Shiyan 提交于
mx1ads.c can be replaced with devicetree equivalent: imx1-ads.dts, so remove the board file. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Alexander Shiyan 提交于
pcm970-baseboard.c and mach-pcm038.c can be replaced with their devicetree equivalents: imx27-phytec-phycore-rdk.dts and imx27-phytec-phycore-som.dtsi respectively, so remove the board files. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Alexander Shiyan 提交于
eukrea_mbimx27-baseboard.c and mach-cpuimx27.c can be replaced with their devicetree equivalents: imx27-eukrea-mbimxsd27-baseboard.dts and imx27-eukrea-cpuimx27.dtsi respectively, so remove the board files. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Acked-by: NEric Bénard <eric@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 18 7月, 2014 4 次提交
-
-
由 Alexander Shiyan 提交于
The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Fabio Estevam 提交于
Allow USB device to work by default. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Alexander Shiyan 提交于
The board has no insufficient support to be fully functional and seems has no users. This patch removes support for this board. However, the support may be added in the future by using the devicetree. Signed-off-by: NAlexander Shiyan <shc_work@mail.ru> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Fabio Estevam 提交于
CONFIG_FHANDLE=y is needed when running systemd with version >=210, so that it can spawn a serial tty via getty. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 12 5月, 2014 2 次提交
-
-
由 Shawn Guo 提交于
The option COMMON_CLK_DEBUG was removed by commit ea72dc2c (clk: remove CONFIG_COMMON_CLK_DEBUG), so let's remove CONFIG_COMMON_CLK_DEBUG from the defconfig. Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
由 Shawn Guo 提交于
Since 2501c917 (mmc: core: Use MMC_UNSAFE_RESUME as default behavior), CONFIG_MMC_UNSAFE_RESUME is not available anymore. Drop it from imx defconfig. Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 30 4月, 2014 1 次提交
-
-
由 Denis Carikli 提交于
Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@freescale.com>
-
- 05 3月, 2014 1 次提交
-
-
由 Fabio Estevam 提交于
PM subsystem treats mmc card as removed during suspend. If MMC is used to store the root file system, it is better to tell the kernel not to treat it as a removable media, so select CONFIG_MMC_UNSAFE_RESUME for such purpose. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 09 12月, 2013 1 次提交
-
-
由 Denis Carikli 提交于
The eukrea mbimxsd25 has a gpio regulator for enabling its LCD display, it also has a gpio button. We enable the respective drivers in order to be able to use theses features with this configuration. Cc: Sascha Hauer <kernel@pengutronix.de> Cc: linux-arm-kernel@lists.infradead.org Cc: Fabio Estevam <fabio.estevam@freescale.com> Cc: Eric Bénard <eric@eukrea.com> Signed-off-by: NDenis Carikli <denis@eukrea.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 22 8月, 2013 2 次提交
-
-
由 Fabio Estevam 提交于
Commit 02502da4 (ASoC: imx-mc13783: Depend on ARCH_ARM) caused the selection of CONFIG_SND_SOC_IMX_MC13783 to be impossible due to a wrong dependency, which caused CONFIG_SND_SOC_IMX_MC13783 to be removed after the defconfigs cleanups. The original selection problem has been fixed by 9f19de64 (ASoC: imx-mc13783: Make SND_SOC_IMX_MC13783 visible again), so it is possible to select CONFIG_SND_SOC_IMX_MC13783 again as originally done. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
由 Fabio Estevam 提交于
Generate imx_v4_v5_defconfig by doing: make imx_v4_v5_defconfig make savedefconfig cp defconfig arch/arm/configs/imx_v4_v5_defconfig No functional change. The goal here is to cleanup imx_v4_v5_defconfig file to make easier and cleaner the addition of new entries. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 16 8月, 2013 1 次提交
-
-
由 Fabio Estevam 提交于
Allow booting a mx25 dt kernel by default. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 12 4月, 2013 1 次提交
-
-
由 Fabio Estevam 提交于
Add CONFIG_GPIO_SYSFS as it is helpful for accessing GPIO from userspace. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 12 2月, 2013 2 次提交
-
-
由 Fabio Estevam 提交于
Let the VPU driver be built by default. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Javier Martinez Canillas 提交于
The Netfilter packet filtering framework is useful for so many use cases that most people will build kernels with it enabled. So, it would probably make sense to have it enabled by default. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 19 10月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
Since commit c5a0d497(ARM: imx: enable multi-platform build), ARCH_MXC is selected by the following logic: config ARCH_MXC def_bool y if ARCH_MULTI_V4_V5 || ARCH_MULTI_V6_V7 , which causes build error on vexpress_defconfig: arch/arm/mach-imx/hotplug.c:49: undefined reference to `imx_enable_cpu' arch/arm/mach-imx/platsmp.c:57: undefined reference to `imx_set_cpu_jump' arch/arm/mach-imx/platsmp.c:58: undefined reference to `imx_enable_cpu' Make ARCH_MXC a user selectable option, so that it does not get built by default on other defconfigs that select ARCH_MULTI_V4_V5 or ARCH_MULTI_V6_V7. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 15 10月, 2012 1 次提交
-
-
由 Shawn Guo 提交于
It enables multi-platform build for imx. With ARCH_MULTI_* options coming to play, ARCH_MXC becomes an user invisible option, while ARCH_IMX_V4_V5 and ARCH_IMX_V6_V7 get removed. Both imx_v4_v5_defconfig and imx_v6_v7_defconfig get updated to adopt the changes. AUTO_ZRELADDR and ARM_PATCH_PHYS_VIRT are selected by ARCH_MXC now to save the duplication. Headers timex.h and uncompress.h are not needed for multi-platform build. Remove them. Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
-
- 10 10月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
Since commit b4c184e5 (edia] media: reorganize the main Kconfig items), it is necessary to select CONFIG_MEDIA_CAMERA_SUPPORT in order to be able to use the SoC camera drivers. Select CONFIG_MEDIA_CAMERA_SUPPORT so that we can use mx2-camera/mx3-camera by default as previously. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 11 7月, 2012 1 次提交
-
-
由 Sascha Hauer 提交于
- reenable CONFIG_MFD_MC13XXX_SPI - Allow booting from MMC card. - Enable mc13783 Codec support - Enable sgtl5000 Codec support - Enable mc13783 RTC - Enable Control Group support for systemd - Enable clk debugfs support - Enable i.MX keypad driver - Enable MC13783 touchscreen - Enable i.MX PATA driver Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 30 5月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
In order to keep consistency with other rtc drivers,rename CONFIG_RTC_MXC to CONFIG_RTC_DRV_MXC. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Acked-by: NWolfram Sang <w.sang@pengutronix.de> Cc: Alessandro Zummo <a.zummo@towertech.it> [akpm@linux-foundation.org: fix missed arch/arm/configs/imx_v6_v7_defconfig] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 27 4月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
Let CONFIG_MACH_IMX27_DT be built by default. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
- 18 4月, 2012 1 次提交
-
-
由 Fabio Estevam 提交于
Add support for CONFIG_REGULATOR_FIXED_VOLTAGE. Without this option the mx27_3ds cannot have the external Ethernet functional due to the need of smsc regulators. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-