* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  bdi: Fix warnings in __mark_inode_dirty for /dev/zero and friends
  char: Mark /dev/zero and /dev/kmem as not capable of writeback
  bdi: Initialize noop_backing_dev_info properly
  cfq-iosched: fix a kernel OOPs when usb key is inserted
  block: fix blk_rq_map_kern bio direction flag
  cciss: freeing uninitialized data on error path

Inodes of devices such as /dev/zero can get dirty for example via
utime(2) syscall or due to atime update. Backing device of such inodes
(zero_bdi, etc.) is however unable to handle dirty inodes and thus
__mark_inode_dirty complains.  In fact, inode should be rather dirtied
against backing device of the filesystem holding it. This is generally a
good rule except for filesystems such as 'bdev' or 'mtd_inodefs'. Inodes
in these pseudofilesystems are referenced from ordinary filesystem
inodes and carry mapping with real data of the device. Thus for these
inodes we have to use inode->i_mapping->backing_dev_info as we did so
far. We distinguish these filesystems by checking whether sb->s_bdi
points to a non-trivial backing device or not.

Example: Assume we have an ext3 filesystem on /dev/sda1 mounted on /.
There's a device inode A described by a path "/dev/sdb" on this
filesystem. This inode will be dirtied against backing device "8:0"
after this patch. bdev filesystem contains block device inode B coupled
with our inode A. When someone modifies a page of /dev/sdb, it's B that
gets dirtied and the dirtying happens against the backing device "8:16".
Thus both inodes get filed to a correct bdi list.

Cc: stable@kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

These devices don't do any writeback but their device inodes still can get
dirty so mark bdi appropriately so that bdi code does the right thing and files
inodes to lists of bdi carrying the device inodes.

Cc: stable@kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Properly initialize this backing dev info so that writeback code does not
barf when getting to it e.g. via sb->s_bdi.

Cc: stable@kernel.org
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'for-linus/i2c/2636-rc5' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: Make sure i2c bus is free before setting it to idle

The lock structs are currently protected by the BKL, but are accessed by
code in fs/locks.c and misc file system and DLM code.  These stubs will
allow all users to switch to the new interface before the implementation
is changed to a spinlock.
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NSage Weil <sage@newdream.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If the i2c bus receives an interrupt with both BB (bus busy) and
ARDY (register access ready) statuses set during the tranfer of the last message
the bus was put to idle while still busy.

This caused bus to timeout.
Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix nohz balance kick
  sched: Fix user time incorrectly accounted as system time on 32-bit

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  hw breakpoints: Fix pid namespace bug
  x86: Fix instruction breakpoint encoding
  oprofile: Add Support for Intel CPU Family 6 / Model 22 (Intel Celeron 540)
  kprobes: Fix Kconfig dependency

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: select CRYPTO
  ceph: check mapping to determine if FILE_CACHE cap is used
  ceph: only send one flushsnap per cap_snap per mds session
  ceph: fix cap_snap and realm split
  ceph: stop sending FLUSHSNAPs when we hit a dirty capsnap
  ceph: correctly set 'follows' in flushsnap messages
  ceph: fix dn offset during readdir_prepopulate
  ceph: fix file offset wrapping at 4GB on 32-bit archs
  ceph: fix reconnect encoding for old servers
  ceph: fix pagelist kunmap tail
  ceph: fix null pointer deref on anon root dentry release

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Hold a reference to the object whilst unbinding the eviction list
  drm/i915,agp/intel: Add second set of PCI-IDs for B43
  drm/i915: Fix Sandybridge fence registers
  drm/i915/crt: Downgrade warnings for hotplug failures
  drm/i915: Ensure that the crtcinfo is populated during mode_fixup()

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  lguest: update comments to reflect LHCALL_LOAD_GDT_ENTRY.
  virtio: console: Prevent userspace from submitting NULL buffers
  virtio: console: Fix poll blocking even though there is data to read

There's a situation where the nohz balancer will try to wake itself:

cpu-x is idle which is also ilb_cpu
got a scheduler tick during idle
and the nohz_kick_needed() in trigger_load_balance() checks for
rq_x->nr_running which might not be zero (because of someone waking a
task on this rq etc) and this leads to the situation of the cpu-x
sending a kick to itself.

And this can cause a lockup.

Avoid this by not marking ourself eligible for kicking.
Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1284400941.2684.19.camel@sbsiddha-MOBL3.sc.intel.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Mike reported a kernel crash when a usb key hotplug is performed while all
kernel thrads are not in a root cgroup and are running in one of the child
cgroups of blkio controller.

	BUG: unable to handle kernel NULL pointer dereference at 0000002c
	IP: [<c11c7b08>] cfq_get_queue+0x232/0x412
	*pde = 00000000
	Oops: 0000 [#1] PREEMPT
	last sysfs file: /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-1/2-1:1.0/host3/scsi_host/host3/uevent

	[..]
	Pid: 30039, comm: scsi_scan_3 Not tainted 2.6.35.2-fg.roam #1 Volvi2                         /Aspire 4315
	EIP: 0060:[<c11c7b08>] EFLAGS: 00010086 CPU: 0
	EIP is at cfq_get_queue+0x232/0x412
	EAX: f705f9c0 EBX: e977abac ECX: 00000000 EDX: 00000000
	ESI: f00da400 EDI: f00da4ec EBP: e977a800 ESP: dff8fd00
	 DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068
	Process scsi_scan_3 (pid: 30039, ti=dff8e000 task=f6b6c9a0 task.ti=dff8e000)
	Stack:
	 00000000 00000000 00000001 01ff0000 f00da508 00000000 f00da524 f00da540
	<0> e7994940 dd631750 f705f9c0 e977a820 e977ac44 f00da4d0 00000001 f6b6c9a0
	<0> 00000010 00008010 0000000b 00000000 00000001 e977a800 dd76fac0 00000246
	Call Trace:
	 [<c11c7f10>] ? cfq_set_request+0x228/0x34c
	 [<c11c7ce8>] ? cfq_set_request+0x0/0x34c
	 [<c11bb3b9>] ? elv_set_request+0xf/0x1c
	 [<c11bdd51>] ? get_request+0x1ad/0x22f
	 [<c11bddf2>] ? get_request_wait+0x1f/0x11a
	 [<c11d013b>] ? kvasprintf+0x33/0x3b
	 [<c127b537>] ? scsi_execute+0x1d/0x103
	 [<c127b675>] ? scsi_execute_req+0x58/0x83
	 [<c127c391>] ? scsi_probe_and_add_lun+0x188/0x7c2
	 [<c12718c6>] ? attribute_container_add_device+0x15/0xfa
	 [<c11c95d1>] ? kobject_get+0xf/0x13
	 [<c126d1db>] ? get_device+0x10/0x14
	 [<c127be93>] ? scsi_alloc_target+0x217/0x24d
	 [<c127cbd8>] ? __scsi_scan_target+0x95/0x480
	 [<c10204eb>] ? dequeue_entity+0x14/0x1fe
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c1020491>] ? update_curr+0x165/0x1ab
	 [<c127d00d>] ? scsi_scan_channel+0x4a/0x76
	 [<c127d0b0>] ? scsi_scan_host_selected+0x77/0xad
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d137>] ? do_scsi_scan_host+0x51/0x56
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c127d14a>] ? do_scan_async+0xe/0x11a
	 [<c127d13c>] ? do_scan_async+0x0/0x11a
	 [<c10354c5>] ? kthread+0x5e/0x63
	 [<c1035467>] ? kthread+0x0/0x63
	 [<c1002af6>] ? kernel_thread_helper+0x6/0x10
	Code: 44 24 1c 54 83 44 24 18 54 83 fa 03 75 94 8b 06 c7 86 64 02 00 00 01 00 00 00 83 e0 03 09 f0 89 06 8b 44 24 28 8b 90 58 01 00 00 <8b> 42 2c 85 c0 75 03 8b 42 08 8d 54 24 48 52 8d 4c 24 50 51 68
	EIP: [<c11c7b08>] cfq_get_queue+0x232/0x412 SS:ESP 0068:dff8fd00
	CR2: 000000000000002c
	---[ end trace 9a88306573f69b12 ]---

The problem here is that we don't have bdi->dev information available when
thread does some IO.  Hence when dev_name() tries to access bdi->dev, it
crashes.

This problem does not happen if kernel threads are in root group as root
group is statically allocated at device initialization time and we don't
hit this piece of code.

Fix it by delaying the filling of major and minor number information of
device in blk_group.  Initially a blk_group is created with 0 as device
information and this information is filled later once some more IO comes
in from same group.
Reported-by: NMike Kazantsev <mk.fraggod@gmail.com>
Signed-off-by: NVivek Goyal <vgoyal@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This bug was introduced in 7b6d91da
"block: unify flags for struct bio and struct request"

Cc: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NBenny Halevy <bhalevy@panasas.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

The "h->scatter_list" is allocated inside a for loop.  If any of those
allocations fail, then the rest of the list is uninitialized data.  When
we free it we should start from the top and free backwards so that we
don't call kfree() on uninitialized pointers.

Also if the allocation for "h->scatter_list" fails then we would get an
Oops here.  I should have noticed this when I send: 4ee69851 "cciss:
handle allocation failure."  but I didn't.  Sorry about that.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We used to have a hypercall which reloaded the entire GDT, then we
switched to one which loaded a single entry (to match the IDT code).

Some comments were not updated, so fix them.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reported by: Eviatar Khen <eviatarkhen@gmail.com>

A userspace could submit a buffer with 0 length to be written to the
host.  Prevent such a situation.

This was not needed previously, but recent changes in the way write()
works exposed this condition to trigger a virtqueue event to the host,
causing a NULL buffer to be sent across.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
CC: stable@kernel.org

I found this while working on a Linux agent for spice, the symptom I was
seeing was select blocking on the spice vdagent virtio serial port even
though there were messages queued up there.

virtio_console's port_fops_poll checks port->inbuf != NULL to determine
if read won't block. However if an application reads enough bytes from
inbuf through port_fops_read, to empty the current port->inbuf,
port->inbuf will be NULL even though there may be buffers left in the
virtqueue.

This causes poll() to block even though there is data to be read,
this patch fixes this by using will_read_block(port) instead of the
port->inbuf != NULL check.
Signed-off-By: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: vt6655: fix buffer overflow
  Revert: "Staging: batman-adv: Adding netfilter-bridge hooks"

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: musb: MAINTAINERS: Fix my mail address
  USB: serial/mos*: prevent reading uninitialized stack memory
  USB: otg: twl4030: fix phy initialization(v1)
  USB: EHCI: Disable langwell/penwell LPM capability
  usb: musb_debugfs: don't use the struct file private_data field with seq_files

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  serial: mfd: fix bug in serial_hsu_remove()
  serial: amba-pl010: fix set_ldisc

"param->u.wpa_associate.wpa_ie_len" comes from the user.  We should
check it so that the copy_from_user() doesn't overflow the buffer.

Also further down in the function, we assume that if
"param->u.wpa_associate.wpa_ie_len" is set then "abyWPAIE[0]" is
initialized.  To make that work, I changed the test here to say that if
"wpa_ie_len" is set then "wpa_ie" has to be a valid pointer or we return
-EINVAL.

Oddly, we only use the first element of the abyWPAIE[] array.  So I
suspect there may be some other issues in this function.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 96d592ed.

The netfilter hook seems to be misused and may leak skbs in situations
when NF_HOOK returns NF_STOLEN. It may not filter everything as
expected. Also the ethernet bridge tables are not yet capable to
understand batman-adv packet correctly.

It was only added for testing purposes and can be removed again.
Reported-by: NVasiliy Kulikov <segooon@gmail.com>
Signed-off-by: NSven Eckelmann <sven.eckelmann@gmx.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Medfield HSU driver deal with 4 pci devices(3 uart ports + 1 dma controller),
so in pci remove func, we need handle them differently
Signed-off-by: NFeng Tang <feng.tang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit d87d9b7d ("tty: serial - fix tty referencing in set_ldisc") changed
set_ldisc to take ldisc number as parameter. This patch fixes AMBA PL010 driver
according the new prototype.
Signed-off-by: NMika Westerberg <mika.westerberg@iki.fi>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

If we don't, contributors to musb and any USB OMAP
code will be sending mails to an unexistent inbox.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The TIOCGICOUNT device ioctl in both mos7720.c and mos7840.c allows
unprivileged users to read uninitialized stack memory, because the
"reserved" member of the serial_icounter_struct struct declared on the
stack is not altered or zeroed before being copied back to the user.
This patch takes care of it.
Signed-off-by: NDan Rosenberg <dan.j.rosenberg@gmail.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Commit 461c3177(into 2.6.36-v3)
is put forward to power down phy if no usb cable is connected,
but does introduce the two issues below:

1), phy is not into work state if usb cable is connected
with PC during poweron, so musb device mode is not usable
in such case, follows the reasons:
	-twl4030_phy_resume is not called, so
		regulators are not enabled
		i2c access are not enabled
		usb mode not configurated

2), The kernel warings[1] of regulators 'unbalanced disables'
is caused if poweron without usb cable connected
with PC or b-device.

This patch fixes the two issues above:
	-power down phy only if no usb cable is connected with PC
and b-device
	-do phy initialization(via __twl4030_phy_resume) if usb cable
is connected with PC(vbus event) or another b-device(ID event) in
twl4030_usb_probe.

This patch also doesn't put VUSB3V1 LDO into active mode in
twl4030_usb_ldo_init until VBUS/ID change detected, so we can
save more power consumption than before.

This patch is verified OK on Beagle board either connected with
usb cable or not when poweron.

[1]. warnings of 'unbalanced disables' of regulators.
[root@OMAP3EVM /]# dmesg
------------[ cut here ]------------
WARNING: at drivers/regulator/core.c:1357 _regulator_disable+0x38/0x128()
unbalanced disables for VUSB1V8
Modules linked in:
Backtrace:
[<c0030c48>] (dump_backtrace+0x0/0x110) from [<c034f5a8>] (dump_stack+0x18/0x1c)
 r7:c78179d8 r6:c01ed6b8 r5:c0410822 r4:0000054d
[<c034f590>] (dump_stack+0x0/0x1c) from [<c0057da8>] (warn_slowpath_common+0x54/0x6c)
[<c0057d54>] (warn_slowpath_common+0x0/0x6c) from [<c0057e64>] (warn_slowpath_fmt+0x38/0x40)
 r9:00000000 r8:00000000 r7:c78e6608 r6:00000000 r5:fffffffb
 r4:c78e6c00
[<c0057e2c>] (warn_slowpath_fmt+0x0/0x40) from [<c01ed6b8>] (_regulator_disable+0x38/0x128)
 r3:c0410e53 r2:c0410ad5
[<c01ed680>] (_regulator_disable+0x0/0x128) from [<c01ed87c>] (regulator_disable+0x24/0x38)
 r7:c78e6608 r6:00000000 r5:c78e6c40 r4:c78e6c00
[<c01ed858>] (regulator_disable+0x0/0x38) from [<c02382dc>] (twl4030_phy_power+0x15c/0x17c)
 r5:c78595c0 r4:00000000
[<c0238180>] (twl4030_phy_power+0x0/0x17c) from [<c023831c>] (twl4030_phy_suspend+0x20/0x2c)
 r6:00000000 r5:c78595c0 r4:c78595c0
[<c02382fc>] (twl4030_phy_suspend+0x0/0x2c) from [<c0238638>] (twl4030_usb_irq+0x11c/0x16c)
 r5:c78595c0 r4:00000040
[<c023851c>] (twl4030_usb_irq+0x0/0x16c) from [<c034ec18>] (twl4030_usb_probe+0x2c4/0x32c)
 r6:00000000 r5:00000000 r4:c78595c0
[<c034e954>] (twl4030_usb_probe+0x0/0x32c) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
 r7:00000000 r6:c047d49c r5:c78e6608 r4:c047d49c
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:00000000 r6:c78e6608 r5:c78e6608 r4:c047d49c
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c78e663c r5:c78e6608 r4:c78e6608
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:00000000 r6:00000002 r5:c78e6608 r4:c78e6600
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c021597c>] (platform_device_add+0x110/0x16c)
[<c021586c>] (platform_device_add+0x0/0x16c) from [<c0220cb0>] (add_numbered_child+0xd8/0x118)
 r7:00000000 r6:c045f15c r5:c78e6600 r4:00000000
[<c0220bd8>] (add_numbered_child+0x0/0x118) from [<c001c618>] (twl_probe+0x3a4/0x72c)
[<c001c274>] (twl_probe+0x0/0x72c) from [<c02601ac>] (i2c_device_probe+0x7c/0xa4)
[<c0260130>] (i2c_device_probe+0x0/0xa4) from [<c0214244>] (driver_probe_device+0xd0/0x190)
 r5:c7856e20 r4:c047c860
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c02143d4>] (__device_attach+0x44/0x48)
 r7:c7856e04 r6:c7856e20 r5:c7856e20 r4:c047c860
[<c0214390>] (__device_attach+0x0/0x48) from [<c0213694>] (bus_for_each_drv+0x50/0x90)
 r5:c0214390 r4:00000000
[<c0213644>] (bus_for_each_drv+0x0/0x90) from [<c0214474>] (device_attach+0x70/0x94)
 r6:c7856e54 r5:c7856e20 r4:c7856e20
[<c0214404>] (device_attach+0x0/0x94) from [<c02134fc>] (bus_probe_device+0x2c/0x48)
 r7:c7856e04 r6:c78fd048 r5:c7856e20 r4:c7856e20
[<c02134d0>] (bus_probe_device+0x0/0x48) from [<c0211e48>] (device_add+0x340/0x4b4)
[<c0211b08>] (device_add+0x0/0x4b4) from [<c0211fd8>] (device_register+0x1c/0x20)
[<c0211fbc>] (device_register+0x0/0x20) from [<c0260aa8>] (i2c_new_device+0xec/0x150)
 r5:c7856e00 r4:c7856e20
[<c02609bc>] (i2c_new_device+0x0/0x150) from [<c0260dc0>] (i2c_register_adapter+0xa0/0x1c4)
 r7:00000000 r6:c78fd078 r5:c78fd048 r4:c781d5c0
[<c0260d20>] (i2c_register_adapter+0x0/0x1c4) from [<c0260f80>] (i2c_add_numbered_adapter+0x9c/0xb4)
 r7:00000a28 r6:c04600a8 r5:c78fd048 r4:00000000
[<c0260ee4>] (i2c_add_numbered_adapter+0x0/0xb4) from [<c034efa4>] (omap_i2c_probe+0x324/0x3e8)
 r5:00000000 r4:c78fd000
[<c034ec80>] (omap_i2c_probe+0x0/0x3e8) from [<c02152a0>] (platform_drv_probe+0x20/0x24)
[<c0215280>] (platform_drv_probe+0x0/0x24) from [<c0214244>] (driver_probe_device+0xd0/0x190)
[<c0214174>] (driver_probe_device+0x0/0x190) from [<c021436c>] (__driver_attach+0x68/0x8c)
 r7:c78b2140 r6:c047e214 r5:c04600e4 r4:c04600b0
[<c0214304>] (__driver_attach+0x0/0x8c) from [<c021399c>] (bus_for_each_dev+0x50/0x84)
 r7:c78b2140 r6:c047e214 r5:c0214304 r4:00000000
[<c021394c>] (bus_for_each_dev+0x0/0x84) from [<c0214068>] (driver_attach+0x20/0x28)
 r6:c047e214 r5:c047e214 r4:c00270d0
[<c0214048>] (driver_attach+0x0/0x28) from [<c0213274>] (bus_add_driver+0xa8/0x228)
[<c02131cc>] (bus_add_driver+0x0/0x228) from [<c02146a4>] (driver_register+0xb0/0x13c)
[<c02145f4>] (driver_register+0x0/0x13c) from [<c0215744>] (platform_driver_register+0x4c/0x60)
 r9:00000000 r8:c001f688 r7:00000013 r6:c005b6fc r5:c00083dc
r4:c00270d0
[<c02156f8>] (platform_driver_register+0x0/0x60) from [<c001f69c>] (omap_i2c_init_driver+0x14/0x1c)
[<c001f688>] (omap_i2c_init_driver+0x0/0x1c) from [<c002c460>] (do_one_initcall+0xd0/0x1a4)
[<c002c390>] (do_one_initcall+0x0/0x1a4) from [<c0008478>] (kernel_init+0x9c/0x154)
[<c00083dc>] (kernel_init+0x0/0x154) from [<c005b6fc>] (do_exit+0x0/0x688)
 r5:c00083dc r4:00000000
---[ end trace 1b75b31a2719ed1d ]---
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Felipe Balbi <me@felipebalbi.com>
Cc: Anand Gadiyar <gadiyar@ti.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

We have to do so due to HW limitation.
Signed-off-by: NAlek Du <alek.du@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

seq_files use the private_data field of a file struct for storing a seq_file structure,
data should be stored in seq_file's own private field (e.g. file->private_data->private)
Otherwise seq_release() will free the private data when the file is closed.
Signed-off-by: NMathias Nyman <mathias.nyman@nokia.com>
Cc: stable <stable@kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

During heavy aperture thrashing we may be forced to wait upon several active
objects during eviction. The active list may be the last reference to
these objects and so the action of waiting upon one of them may cause
another to be freed (and itself unbound). To prevent the object
disappearing underneath us, we need to acquire and hold a reference
whilst unbinding.

This should fix the reported page refcount OOPS:

kernel BUG at drivers/gpu/drm/i915/i915_gem.c:1444!
...
RIP: 0010:[<ffffffffa0093026>]  [<ffffffffa0093026>] i915_gem_object_put_pages+0x25/0xf5 [i915]
Call Trace:
 [<ffffffffa009481d>] i915_gem_object_unbind+0xc5/0x1a7 [i915]
 [<ffffffffa0098ab2>] i915_gem_evict_something+0x3bd/0x409 [i915]
 [<ffffffffa0027923>] ? drm_gem_object_lookup+0x27/0x57 [drm]
 [<ffffffffa0093bc3>] i915_gem_object_bind_to_gtt+0x1d3/0x279 [i915]
 [<ffffffffa0095b30>] i915_gem_object_pin+0xa3/0x146 [i915]
 [<ffffffffa0027948>] ? drm_gem_object_lookup+0x4c/0x57 [drm]
 [<ffffffffa00961bc>] i915_gem_do_execbuffer+0x50d/0xe32 [i915]
Reported-by: NShawn Starr <shawn.starr@rogers.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18902Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We need to make sure that only the first do_signal() to be handled on
the way out syscall will bother with syscall restarts; additionally, the
check on the "signal has user handler" path had been wrong - compare
with restart prevention in sigreturn()...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

do_signal() should place the syscall number in gr7, not gr8 when
handling ERESTART_WOULDBLOCK.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use force_sigsegv() rather than force_sig(SIGSEGV, ...) as the former
resets the SEGV handler pointer which will kill the process, rather than
leaving it open to an infinite loop if the SEGV handler itself caused a
SEGV signal.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

a) sa_handler might be maliciously set to point to kernel memory;
   blindly dereferencing it in FDPIC case is a Bad Idea(tm).

b) I'm not sure you need that set_fs(USER_DS) there at all, but if you
   do, you'd better do it *before* checking the frame you've decided to
   use with access_ok(), lest sigaltstack() becomes a convenient
   roothole.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reset restart_block.fn on executing a sigreturn such that any currently
pending system call restarts will be forced to return -EINTR.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 4969c119 ("mm: fix swapin race condition") is now agreed to
be incomplete.  There's a race, not very much less likely than the
original race envisaged, in which it is further necessary to check that
the swapcache page's swap has not changed.

Here's the reasoning: cast in terms of reuse_swap_page(), but probably
could be reformulated to rely on try_to_free_swap() instead, or on
swapoff+swapon.

A, faults into do_swap_page(): does page1 = lookup_swap_cache(swap1) and
comes through the lock_page(page1).

B, a racing thread of the same process, faults on the same address: does
page1 = lookup_swap_cache(swap1) and now waits in lock_page(page1), but
for whatever reason is unlucky not to get the lock any time soon.

A carries on through do_swap_page(), a write fault, but cannot reuse the
swap page1 (another reference to swap1).  Unlocks the page1 (but B
doesn't get it yet), does COW in do_wp_page(), page2 now in that pte.

C, perhaps the parent of A+B, comes in and write faults the same swap
page1 into its mm, reuse_swap_page() succeeds this time, swap1 is freed.

kswapd comes in after some time (B still unlucky) and swaps out some
pages from A+B and C: it allocates the original swap1 to page2 in A+B,
and some other swap2 to the original page1 now in C.  But does not
immediately free page1 (actually it couldn't: B holds a reference),
leaving it in swap cache for now.

B at last gets the lock on page1, hooray! Is PageSwapCache(page1)? Yes.
Is pte_same(*page_table, orig_pte)? Yes, because page2 has now been
given the swap1 which page1 used to have.  So B proceeds to insert page1
into A+B's page_table, though its content now belongs to C, quite
different from what A wrote there.

B ought to have checked that page1's swap was still swap1.
Signed-off-by: NHugh Dickins <hughd@google.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>