- 03 12月, 2015 1 次提交
-
-
由 Hans Verkuil 提交于
Add the new match_reduced_fps argument to v4l2_match_dv_timings(). Depending on the situation you may or may not desire to match the reduced_fps flag. Typically only HDMI transmitters will need to check for this flag. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 19 11月, 2015 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
commit f934a94b ('s5c73m3: Export OF module alias information') broke compilation when compiled as module: In file included from drivers/media/i2c/s5c73m3/s5c73m3-spi.c:22:0: drivers/media/i2c/s5c73m3/s5c73m3-spi.c:40:40: error: expected ')' before ';' token MODULE_DEVICE_TABLE(of, s5c73m3_spi_ids;); ^ Fix it by removing the extra ';' Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 18 11月, 2015 4 次提交
-
-
由 Javier Martinez Canillas 提交于
The SPI core always reports the MODALIAS uevent as "spi:<modalias>" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: SPI id table or OF match table). So drivers needs to export the SPI id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. But this means that OF-only drivers needs to have both OF and SPI id tables that have to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. Which can lead to issues if two vendors use the same SPI device name for example. To avoid the above, the SPI core behavior may be changed in the future to not require an SPI device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table even when is unused now to prevent breaking module loading when the core changes. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Julia Lawall 提交于
These v4l2_ctrl_ops structures are never modified, like all the other v4l2_ctrl_ops structures, so declare them as const. Done with the help of Coccinelle. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Ulrich Hecht 提交于
Initialization of the ADV7180 chip fails on the Renesas R8A7790-based Lager board about 50% of the time. This patch resolves the issue by increasing the minimum delay after reset from 2 ms to 5 ms, following the recommendation in the ADV7180 datasheet: "Executing a software reset takes approximately 2 ms. However, it is recommended to wait 5 ms before any further I2C writes are performed." Signed-off-by: NUlrich Hecht <ulrich.hecht+renesas@gmail.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
The quantization bits are in bits 7-6, not 7-4, so shift by 6 instead of 4. This bug is caused by a typo in the adv7511 datasheet. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 17 11月, 2015 2 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Let's not mix headers used by the core with those headers that are needed by some driver-specific interface header. The headers used on drivers were manually moved using: mkdir include/media/drv-intf/ git mv include/media/cx2341x.h include/media/cx25840.h \ include/media/exynos-fimc.h include/media/msp3400.h \ include/media/s3c_camif.h include/media/saa7146.h \ include/media/saa7146_vv.h include/media/sh_mobile_ceu.h \ include/media/sh_mobile_csi2.h include/media/sh_vou.h \ include/media/si476x.h include/media/soc_mediabus.h \ include/media/tea575x.h include/media/drv-intf/ And the references for those headers were corrected using: MAIN_DIR="media/" PREV_DIR="media/" DIRS="drv-intf/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
由 Mauro Carvalho Chehab 提交于
Currently, include/media is messy, as it contains both the V4L2 core headers and some driver-specific headers on the same place. That makes harder to identify what core headers should be documented and what headers belong to I2C drivers that are included only by bridge/main drivers that would require the functions provided by them. Let's move those i2c specific files to its own subdirectory. The files to move were produced via the following script: mkdir include/media/i2c (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) (cd include/media; for i in *.h; do n=`echo $i|sed s/.h$/.c/`; if [ -e ../../drivers/media/*/i2c/$n ]; then echo $i; git mv $i i2c/; fi; done) for i in include/media/*.h; do n=`basename $i`; (for j in $(git grep -l $n); do dirname $j; done)|sort|uniq|grep -ve '^.$' > list; num=$(wc -l list|cut -d' ' -f1); if [ $num == 1 ]; then if [ "`grep i2c list`" != "" ]; then git mv $i include/media/i2c; fi; fi; done And the references corrected via this script: MAIN_DIR="media/" PREV_DIR="media/" DIRS="i2c/" echo "Checking affected files" >&2 for i in $DIRS; do for j in $(find include/$MAIN_DIR/$i -type f -name '*.h'); do n=`basename $j` git grep -l $n done done|sort|uniq >files && ( echo "Handling files..." >&2; echo "for i in \$(cat files|grep -v Documentation); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo "perl -ne 's,(include [\\\"\\<])$PREV_DIR($i)([\\\"\\>]),\1$MAIN_DIR$j\2\3,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done"; ); echo "Handling documentation..." >&2; echo "for i in MAINTAINERS \$(cat files); do cat \$i | \\"; ( cd include/$MAIN_DIR; for j in $DIRS; do for i in $(ls $j); do echo " perl -ne 's,include/$PREV_DIR($i)\b,include/$MAIN_DIR$j\1,; print \$_' |\\"; done; done; echo "cat > a && mv a \$i; done" ); ) >script && . ./script Merged Sakari Ailus patch that moves smiapp.h to include/media/i2c. Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: NArnd Bergmann <arnd@arndb.de>
-
- 10 11月, 2015 1 次提交
-
-
由 Andrew Morton 提交于
Switch everything to the new and more capable implementation of abs(). Mainly to give the new abs() a bit of a workout. Cc: Michal Nazarewicz <mina86@mina86.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 10月, 2015 1 次提交
-
-
由 Andrew F. Davis 提交于
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: NAndrew F. Davis <afd@ti.com> Acked-by: NJonathan Cameron <jic23@kernel.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 21 10月, 2015 1 次提交
-
-
由 Javier Martinez Canillas 提交于
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So technically there's no need for a driver to export the OF table since currently it's not used. In fact, the I2C device ID table is mandatory for I2C drivers since a i2c_device_id is passed to the driver's probe function even if the I2C core used the OF table to match the driver. And since the I2C core uses different tables, OF-only drivers needs to have duplicated data that has to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. To avoid the above, the I2C core behavior may be changed in the future to not require an I2C device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table to prevent breaking module autoloading if that happens. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 03 10月, 2015 1 次提交
-
-
由 Fengguang Wu 提交于
drivers/media/i2c/ml86v7667.c:430:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 02 10月, 2015 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: warning: incorrect type in argument 1 (different base types) drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: expected restricted __be16 const [usertype] *p drivers/media/i2c/s5c73m3/s5c73m3-core.c:170:39: got unsigned short [usertype] *<noident> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 01 10月, 2015 3 次提交
-
-
由 Javier Martinez Canillas 提交于
Allow the subdevice to be probed asynchronously. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Javier Martinez Canillas 提交于
The SPI core always reports the MODALIAS uevent as "spi:<modalias>" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: SPI id table or OF match table). So drivers needs to export the SPI id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. But this means that OF-only drivers needs to have both OF and SPI id tables that have to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. Which can lead to issues if two vendors use the same SPI device name for example. To avoid the above, the SPI core behavior may be changed in the future to not require an SPI device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table even when is unused now to prevent breaking module loading when the core changes. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Sergei Shtylyov 提交于
The driver was written with the 'soc_camera' use in mind, however the g_std() video method was forgotten. Implement it at last... Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 04 9月, 2015 5 次提交
-
-
由 Fengguang Wu 提交于
drivers/media/i2c/tc358743.c:1960:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci CC: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Philipp Zabel 提交于
Hardware interrupts are enabled in the probe function, before the subdev is registered to its v4l2_device. Until v4l2_device_register_subdev_node is called, sd->devnode is NULL and v4l2_subdev_notify_event must not be called. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
As reported by Randy: > when CONFIG_MEDIA_CONTROLLER is not enabled: > > ../drivers/media/i2c/tc358743.c: In function 'tc358743_probe': > ../drivers/media/i2c/tc358743.c:1890:29: error: 'struct v4l2_subdev' has no member named 'entity' > err = media_entity_init(&sd->entity, 1, &state->pad, 0); > ^ > ../drivers/media/i2c/tc358743.c:1940:26: error: 'struct v4l2_subdev' has no member named 'entity' > media_entity_cleanup(&sd->entity); > ^ > ../drivers/media/i2c/tc358743.c: In function 'tc358743_remove': > ../drivers/media/i2c/tc358743.c:1955:26: error: 'struct v4l2_subdev' has no member named 'entity' > media_entity_cleanup(&sd->entity); > ^ This driver depends on VIDEO_V4L2_SUBDEV_API and needs to select HDMI. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Reported-by: NRandy Dunlap <rdunlap@infradead.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Uwe Kleine-König 提交于
Commit 25614824 ("[media] tc358743: support probe from device tree") specified in the device tree binding documentation that the reset gpio is optional. Make the implementation match accordingly. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Uwe Kleine-König 提交于
Commit 25614824 ("[media] tc358743: support probe from device tree") failed to explicitly set the direction of the reset gpio. Use the optional flag of devm_gpiod_get to make up leeway. This is also necessary because the flag parameter will become mandatory soon. Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: NLinus Walleij <linus.walleij@linaro.org> Acked-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 17 8月, 2015 1 次提交
-
-
由 Mike Looijmans 提交于
Header claims GPL v2, so make the MODULE_LICENSE reflect that properly. Signed-off-by: NMike Looijmans <mike.looijmans@topic.nl> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 16 8月, 2015 4 次提交
-
-
由 Mauro Carvalho Chehab 提交于
sr030pc30_get_fmt() can only succeed if both info->curr_win and info->curr_fmt are not NULL. If one of those vars are null, the curent code would call: ret = sr030pc30_set_params(sd); If the curr_win is null, it will return -EINVAL, as it would be expected. However, if curr_fmt is NULL, the function won't set it. The code will then try to read from it: mf->code = info->curr_fmt->code; mf->colorspace = info->curr_fmt->colorspace; with obviouly won't work. This got reported by smatch: drivers/media/i2c/sr030pc30.c:505 sr030pc30_get_fmt() error: we previously assumed 'info->curr_win' could be null (see line 499) drivers/media/i2c/sr030pc30.c:507 sr030pc30_get_fmt() error: we previously assumed 'info->curr_fmt' could be null (see line 499) Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Mauro Carvalho Chehab 提交于
Why to store the chosed values for prediv, postdiv and mult if those won't be used? drivers/media/i2c/ov2659.c: In function 'ov2659_pll_calc_params': drivers/media/i2c/ov2659.c:912:35: warning: variable 's_mult' set but not used [-Wunused-but-set-variable] u32 s_prediv = 1, s_postdiv = 1, s_mult = 1; ^ drivers/media/i2c/ov2659.c:912:20: warning: variable 's_postdiv' set but not used [-Wunused-but-set-variable] u32 s_prediv = 1, s_postdiv = 1, s_mult = 1; ^ drivers/media/i2c/ov2659.c:912:6: warning: variable 's_prediv' set but not used [-Wunused-but-set-variable] u32 s_prediv = 1, s_postdiv = 1, s_mult = 1; ^ This is likely some leftover from some past change. Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/i2c/ov9650.c:1439 ov965x_detect_sensor() warn: inconsistent indenting Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Mauro Carvalho Chehab 提交于
drivers/media/i2c/tc358743.c:148:19: warning: Variable length array is used. As the maximum size is 1026, we can't use dynamic var, as it would otherwise spend 1056 bytes of the stack at i2c_wr() function. So, allocate a buffer with the allowed maximum size together with the state var. Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: NMats Randgaard <matrandg@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 12 8月, 2015 2 次提交
-
-
由 Javier Martinez Canillas 提交于
The I2C core always reports the MODALIAS uevent as "i2c:<client name" regardless if the driver was matched using the I2C id_table or the of_match_table. So the driver needs to export the I2C table and this be built into the module or udev won't have the necessary information to auto load the correct module when the device is added. Signed-off-by: NJavier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Krzysztof Kozlowski 提交于
i2c_driver does not need to set an owner because i2c_register_driver() will set it. Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 11 8月, 2015 11 次提交
-
-
由 Geert Uytterhoeven 提交于
Make the i2c devices menu visible when compile-testing, to allow selecting additional drivers on top of the drivers that are already automatically selected if MEDIA_SUBDRV_AUTOSELECT is enabled. Without this, many drivers stay disabled during e.g. allmodconfig. Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Antonio Borneo 提交于
In ancient times it was necessary to manually initialize the bus field of an spi_driver to spi_bus_type. These days this is done in spi_register_driver(), so we can drop the manual assignment. Signed-off-by: NAntonio Borneo <borneo.antonio@gmail.com> Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
drivers/media/i2c/mt9v032.c: In function ‘mt9v032_probe’: CC [M] drivers/media/i2c/s5k4ecgx.o drivers/media/i2c/mt9v032.c:996:20: warning: ‘pdata’ may be used uninitialized in this function [-Wmaybe-uninitialized] if (pdata && pdata->link_freqs) { ^ It can indeed be uninitialized in one corner case. Initialize to NULL. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 William Towle 提交于
Using adv7611_read_cable_det() for ADV7612 means that full support for '.max_port = ADV7604_PAD_HDMI_PORT_B,' isn't available due to the need for multiple port reads to determine cable detection, and an agreed mechanism for communicating the separate statuses. This patch replaces adv7611_read_cable_det() with a functionally identical copy, commented appropriately. Earlier submissions [leading to commit 8331d30b] also set .cp_csc, which is used in a cp_read() call within adv76xx_log_status(). Signed-off-by: NWilliam Towle <william.towle@codethink.co.uk> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 William Towle 提交于
Prior to commit f862f57d ("[media] media: i2c: ADV7604: Migrate to regmap"), the local variable 'val' contained the combined register reads used in the chipset version ID test. Restore this expectation so that the comparison works as it used to. Signed-off-by: NWilliam Towle <william.towle@codethink.co.uk> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
The JPEG colorspace should only be used for JPEG encoded images. This is just a regular sRGB sensor. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
Simplify confusing conditions. This also swaps the checks for NTSC and PAL: to be consistent with other drivers check for NTSC first. So if the user sets both NTSC and PAL bits, then NTSC wins. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
When the standard changes the VACTIVE and VDELAY values need to be updated. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
This is an SDTV video receiver, so the colorspace should be SMPTE170M. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
The zoran driver has now been converted to the control framework which means that these three subdevice drivers no longer need to support the legacy core control ops since the last bridge driver that needed that has now been converted. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
由 Hans Verkuil 提交于
The bt pointer was never used, remove it. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-
- 22 7月, 2015 1 次提交
-
-
由 Philipp Zabel 提交于
This is useful to subscribe to HDMI hotplug events via the V4L2_CID_DV_RX_POWER_PRESENT control. Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de> Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-