When the stereo mix input is explicitly enabled via a user hint, the
driver should create always a capture source enum ctl and disable the
auto-mic switch.  Otherwise the behavior gets confused.  For doing it,
this patch just sets spec->suppress_auto_mic flag appropriately.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds codec ID (0x80862809) and module alias for Skylake
display codec.
Signed-off-by: NLibin Yang <libin.yang@intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Also update the documentation to the latest state.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The same fixup to enable EAPD is needed for ASUS Z99He with AD1986A
codec like another ASUS machine.
Reported-and-tested-by: NDmitry V. Zimin <pfzim@mail.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The built-in mic boost volume gets almost muted after suspend/resume
on Lenovo Ideapad S210.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88121Reported-and-tested-by: NRoman Kagan <rkagan@mail.ru>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We introduced AZX_DCAPS_ALIGN_BUFSIZE to explicity show that the
controller needs the alignment, with a slight hope that the buffer
size alignment will be disabled as default in future.  But the reality
tells that most chips need the buffer size alignment, and it'll be
likely enabled in future, too.

This patch drops AZX_DCAPS_ALIGN_BUFSIZE to give back one more
precious DCAPS bit for future use.  At the same time, rename
AZX_DCAPS_BUFSIZE with AZX_DCAPS_NO_ALIGN_BUFSIZE for avoiding
confusion.

AZX_DCAPS_ALIGN_BUFSIZE are still kept (but commented out) in each
DCAPS presets for a purpose as markers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just for improving readability.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Dell has new machines. It supports headset Mic and Headphone Mic.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

User can pass snoop option to enable/disable the snoop behavior, but
currently azx_check_snoop_available() always turns it off for some
devices.  For better debuggability, change the parameter as bint, and
allow user to enable/disable forcibly the snoop when specified via the
module option.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a new driver_caps bit, AZX_DCAPS_SNOOP_OFF, to set the snoop off
as default.  This new bit is used for the checks in
azx_check_snoop_available().  Most of case-switches are replaced with
the new dcaps in each entry.

While working on it, for avoiding to spend more bits, combine three
bits AZX_DCAPS_SNOOP_SCH, AZX_DCAPS_SNOOP_ATI and
AZX_DCAPS_SNOOP_NVIDIA bits into a flat type of two bits.  This
reduces the bits usages, and assign AZX_DCAPS_OFF to this empty bit
now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In olden times the snd_hda_param_read() function always set "*start_id"
but in 2007 we introduced a new return and it causes uninitialized data
bugs in a couple of the callers: print_codec_info() and
hdmi_parse_codec().

Fixes: e8a7f136 ('[ALSA] hda-intel - Improve HD-audio codec probing robustness')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

A number of radeon cards have a HW limitation causing them to be
unable to generate the full 64-bit of address bits for MSIs. This
breaks MSIs on some platforms such as POWER machines.

We used to have a powerpc specific quirk to address that on a
single card, but this doesn't scale very well, this is better
put under control of the drivers who know precisely what a given
HW revision can do.

We now have a generic quirk in the PCI code. We should set it
appropriately for all radeon's from the audio driver.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
CC: <stable@vger.kernel.org>

AMD/ATI HDMI controller chip models, we already have a filter to lower
to 32bit DMA, but the rest are supposed to be working with 64bit
although the hardware doesn't really work with 63bit but only with 40
or 48bit DMA.  In this patch, we take 40bit DMA for safety for the
AMD/ATI controllers as the graphics drivers does.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

The machine originally use the quirk ALC269_FIXUP_HP_GPIO_MIC1_LED,
but the LED doesn't work at all.

After this change, the machine will change to use
ALC269_FIXUP_HP_MUTE_LED_MIC1 through pin_fixup_tbl[], and the LED
works well.

BugLink: https://bugs.launchpad.net/bugs/1389497Tested-by: NTieFu Chen <tienfu.chen@canonical.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

New HP machine supported output mute led and input mute led.
ALC286:
GPIO1 to control output mute led.
GPIO5 to control input mute led.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are a few duplicated codes handling the mute and mic-mute LEDs
via GPIO pins.  Let's consolidate to single helpers.  Here we
introduced two new fields to alc_spec, gpio_mute_led_mask and
gpio_mic_led_mask, to contain the bit mask to set/clear.  Also,
mute_led_polarity is evaluated as well.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The microphone mute led on the Latitude E5550 can't work. We need to
apply DELL_WMI_MIC_MUTE_LED quirk to this machine.

The machine uses alc293 codec and already applied the quirk
ALC293_FIXUP_DELL1_MIC_NO_PRESENCE through pin_fixup_tbl[].

Here we just let DELL_WMI_MIC_MUTE_LED be chained to
ALC269_FIXUP_HEADSET_MODE, then the machine will have these
quirks ALC293_FIXUP_DELL1_MIC_NO_PRESENCE-->
ALC269_FIXUP_HEADSET_MODE-->ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED.

BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: NPo-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

We have one more Dell machine needs DELL_WMI_MIC_MUTE_LED quirk, but
the machine uses alc293 instead of alc255. So if
DELL_WMI_MIC_MUTE_LED still chain ALC255_FIXUP_DELL1_MIC_NO_PRESENCE,
the machine can't use this quirk.

To change this situation, let the DELL_WMI_MIC_MUTE_LED to be a
standalone quirk, and let other quirks chain it.

After this change, this quirk can be chained to any existing quirks,
and as a result, it is possible that this quirk is applied to
a non-Dell machine or a Dell machine without mic mute led on it, but
it is still safe since alc_fixup_dell_wmi() will return an error in
these situations.

And remove the quirk for machine with subsystem id 0x6010 and 0x601f,
these two machines will fall back to the quirk
ALC255_FIXUP_DELL1_MIC_NO_PRESENCE-->ALC255_FIXUP_HEADSET_MODE-->
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED through pin_fixup_tbl[].

BugLink: https://bugs.launchpad.net/bugs/1381856Reported-and-tested-by: NPo-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The functions kfree() and release_firmware() test whether their argument
is NULL and then return immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Lenovo Ideapad Z560 has a mute LED that is controlled via EAPD pin
0x1b on CX20585 codec.  (EAPD bit on corresponds to mute LED on.)
The machine doesn't need other EAPD, so the fixup concentrates on
controlling EAPD 0x1b following the vmaster state (but inversely).

Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=665315Reported-by: NSzymon Kowalczyk <fazerxlo@o2.pl>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This will fix no sound in Linux system after reboot from windows.

Change log:
- alc662_fill_coef() is replaced with alc_fill_eapd_coef_idx()
  and move into alc_auto_init_amp().
- For ALC262, ALC267, ALC268, ALC269, ALC233, ALC255, ALC280, ALC282,
  ALC283, ALC284, ALC285, ALC286, ALC288, ALC290, ALC292, ALC293, ALC294,
  ALC668, ALC888VC, ALC888VD, ALC891, ALC892, ALC898 and ALC1150, add update
  COEF control for EAPD setting.
- Remove alc269_fill_coef() for update EAPD control line.

ADDITIONAL NOTE:
Many Realtek cdoecs have a COEF bit to switch the master amp control
between COEF and EAPD.  Windows drivers seem using COEF while we use
EAPD, which is more standard.  As a result, some system suffer from
the silent output when booting after Windows.  This patch sets the
COEF bits on the relevant codecs properly to switch to EAPD control.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=87771Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch adds DeviceIDs for Sunrise Point-LP
Signed-off-by: NDevin Ryles <devin.ryles@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Restore the registers to prevent the abnormal digital power supply
rising ratio/sequence to the codec and causing the incorrect default
codec register restoration during initialization.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Without the fix, the mute led can't work on these three machines.

After apply this fix, these three machines will fall back on the led
control quirk as below, and through testing, the mute led works very
well.
PIN_QUIRK(0x10ec0282, 0x103c, "HP", ALC269_FIXUP_HP_LINE1_MIC1_LED,
            ALC282_STANDARD_PINS,
            {0x12, 0x90a60140},
            ...

BugLink: https://bugs.launchpad.net/bugs/1389497Tested-by: NTieFu Chen <tienfu.chen@canonical.com>
Cc: Kailang Yang <kailang@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: NHui Wang <hui.wang@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The default EAPD control uses verb command to control EAPD. Some codec
does not have verb command for EAPD. It needs to control by hidden
register.

This update will avoid wrong behavior for some codec.  This patch will
fix double setup for EAPD.  It just needs to turn on by one site for
verb command or hidden register controlled.

Detailed changes:
- alc889_coef_init() is replaced with alc_update_coef_idx() with a
  correct COEF value.
- for ALC262, ALC887 and ALC900, the EAPD setup via the hidden
  register is removed because this rather conflicts with the EAPD verb
  setup.
-  For ALC888-VC, also the hidden register access is removed in
  alc888_coef_init().
- Remove the dead #if 0 code for ALC267/ALC268.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These three HP machines all have the same pin config, so we can
change it to a pin quirk.
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

These HP machines needs GPIO 4 low to enable the headphone amplifier.
In addition, we still need to control LEDs via vref and GPIO.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1387128Tested-by: NTienFu Chen <tienfu.chen@canonical.com>
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Adding ultra doch support for Lenovo Thinkpad X240 (17aa:2214).
[Actually replaced the entry with ALC292_FIXUP_TPT440_DOCK -- tiwai]
Signed-off-by: NLukas Bossard <mr.bobukas@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

CMI8888 shows the stuttering playback when the snooping is disabled
on the audio buffer.  Meanwhile, we've got reports that CORB/RIRB
doesn't work in the snooped mode.  So, as a compromise, disable the
snoop only for CORB/RIRB and enable the snoop for the stream buffers.

The resultant patch became a bit ugly, unfortunately, but we still can
live with it.
Reported-and-tested-by: NGeoffrey McRae <geoff@spacevs.com>
Cc: <stable@vger.kernel.org> # 3.17+
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Put more kerneldoc comments to the exported functions.
Still the generic parser code and the HD-audio controller code aren't
covered yet, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Complete the missing parameters and fix anything wrong there.
Just comment changes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

request_module() handles the printf style arguments, so we don't have
to render strings in the caller side.  Not only it reduces the
unnecessary temporary string buffer, it's even safer from the security
POV.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

It is lite version of AIO machine(0x0626).
The audio layout of this machine was similar with SSID 0x0626.
The audio was same as commit ad8ff99e.
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Update two records for ALC283 for restore default value.

[The update doesn't seem to have high impact on the existing machines,
 but it fixes possible issues, especially expected in BIOS changes on
 new machines, according to Realtek -- tiwai]
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Update default value for ALC282 for COEF.

[The update doesn't seem to have high impact on the existing machines,
 but it fixes possible issues, especially expected in BIOS changes on
 new machines, according to Realtek -- tiwai]
Signed-off-by: NKailang Yang <kailang@realtek.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Without this terminating entry, the pin matching would continue
across random memory until a zero or a non-matching entry was found.

The result being that in some cases, the pin quirk would not be
applied correctly.

Cc: stable@vger.kernel.org
Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

... and reduce the open codes.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>