Add support for watchdog found on SBC-FITPC2 board.
Signed-off-by: NDenis Turischev <denis@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This add watchdog driver for broadcom 47xx device.
It uses the ssb subsytem to access embeded watchdog device.

Because the watchdog timeout is very short (about 2s), a soft timer is used
to increase the watchdog period.

Note : A patch for exporting the ssb_watchdog_timer_set will
be submitted on next linux-mips merge. Without this patch it can't 
be build as a module.
Signed-off-by: NAleksandar Radovanovic <biblbroks@sezampro.rs>
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>
Tested-by: NFlorian Fainelli <florian@openwrt.org>
Cc: Ralf Baechle <ralf@linux-mips.org>                                                                                       
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Add watchdog timer support for Freescale STMP3xxx boards
Signed-off-by: NVitaly Wool <vital@embeddedalley.com>
Signed-off-by: NDmitry Pervushin <dpervushin@embeddedalley.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Implementation of twl4030 watchdog driver.
Signed-off-by: NTimo Kokkonen <timo.t.kokkonen@nokia.com>
Signed-off-by: NAtal Shargorodsky <ext-atal.shargorodsky@nokia.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds support for the U300 COH 901 327 watchdog for the
U300 platform recently added to RMK:s ARM tree.
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add support for PNX833x watchdog timer.
Signed-off-by: NDaniel Laird <daniel.j.laird@nxp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The Orion watchdog driver is also used on Kirkwood.

Convention is to use orion5x for stuff specific to 88F5xxx Orion chips
and simply "orion" for shared stuff across SoCs including Kirkwood.
Signed-off-by: NNicolas Pitre <nico@marvell.com>

Removes ARM26 sections from Kconfig and Makefile, because
ARM26 is long gone.
Signed-off-by: NPaulius Zaleckas <paulius.zaleckas@teltonika.lt>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The FPGA based watchdog timer used by the Pika Warp appliance.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

GE Fanuc SBC610

Support for the FPGA based watchdog timer as found on GE Fanuc's SBC310,
SBC610 and PPC9A Single Board Computers.

This patch adds support for the watchdog timer found in one of the devices
FPGAs. There are two identical watchdog timers at different offsets in the
above mentioned boards, this driver is capable of supporting one of them.
The watchdog timers are also capable of generating interrupts at a
user-configurable threshold, though support for this operation is currently
not supported by the driver.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This driver implements support for the watchdog functionality provided
by the Wolfson Microelectronics WM8350, a multi-function audio and
power management subsystem intended for use in embedded systems. It is
based on a driver originally written by Graeme Gregory, though it has
been extensively modified since then.

Use of a GPIO to kick the watchdog is not yet supported.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Add a watchdog driver for the hardware watchdog timer on the
SMSC SCH3112, SCH3114 and SCH3116 Super IO chipset.
Tested-by: NMarco Chiappero <marco@absence.it>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch allows the use of the hardware watchdog in the
Marvell Orion series of ARM SoCs.
Signed-off-by: NSylver Bruneau <sylver.bruneau@googlemail.com>
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add a driver for the watchdog timer embedded into AT91SAM9X chips.
Signed-off-by: NRenaud Cerrato <r.cerrato@til-technologies.fr>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Adapted the w83627hf_wdt.c driver to work with the w83697ug/uf chip, 
found on MSI Fuzzy CX700 boards.

The method used is taken directly from the winbond datasheet and 
surprisingly it differs slightly from all the other winbond watchdogs.

So far it has only been tested on the CX700 board that I have, but it 
seems to work nicely.
Signed-off-by: NFlemming Frandsen <ff@nrvissing.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add it87xx watchdog driver
IT8716 IT8718 IT8726 IT8712-J IT8712-K
Signed-off-by: NOliver Schuster <olivers137@aol.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The config stuff was already in drivers/watchdog/Kconfig
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add driver for the IDT RC32434 SoC built-in watchdog.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds support for the built-in RDC R-321x SoC watchdog.
Signed-off-by: NFlorian Fainelli <florian.fainelli@telecomint.eu>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

The watchdog driver mpc8xx_wdt.c was a device interface to
arch/ppc/syslib/m8xx_wdt.c for MPC8xx hardware. Now that ARCH=ppc is
gone, this driver is of no more use. For ARCH=powerpc, MPC8xx hardware
is supported by mpc8xxx_wdt.c.
Signed-off-by: NJochen Friedrich <jochen@scram.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Acked-by: NVitaly Bordug <vitb@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

The problem is that iTCO_vendor_support.ko is still being built while
iTCO_vendor.h claims that its functions do not exist. The following
Makefile update fixes that. It causes iTCO_vendor_support.ko to no
longer be built if CONFIG_ITCO_VENDOR_SUPPORT=n.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

More coding style clean-up's.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Rename the driver because now we support some MPC86xx processors.

There are no changes to the mpc83xx_wdt.c file, yet.  When possible, we do
file renames and changes separately (because Linus once asked so, because
it helps git to track the renamed files).
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Trying to compile the v850 port brings many compile errors, one of them exists
since at least kernel 2.6.19.

There also seems to be noone willing to bring this port back into a usable
state.

This patch therefore removes the v850 port.

If anyone ever decides to revive the v850 port the code will still be
available from older kernels, and it wouldn't be impossible for the port to
reenter the kernel if it would become actively maintained again.
Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Acked-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After Linus fixed the inline assembly, the CFLAGS option is not
needed anymore.
Signed-off-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile.
Signed-off-by: NThomas Mingarelli <Thomas.Mingarelli@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536
companion chips to the AMD Geode GX and LX processors.  Only caveat
is that the BIOS must provide at least a one free timer, and most
do not.
Signed-off-by: NJordan Crouse <jordan.crouse@amd.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Hp is providing a Hardware WatchDog Timer driver that will only work with the
specific HW Timer located in the HP ProLiant iLO 2 ASIC. The iLO 2 HW Timer
will generate a Non-maskable Interrupt (NMI) 9 seconds before physically
resetting the server, by removing power, so that the event can be logged to
the HP Integrated Management Log (IML), a Non-Volatile Random Access Memory
(NVRAM). The logging of the event is performed using the HP ProLiant ROM via
an Industry Standard access known as a BIOS Service Directory Entry.
Signed-off-by: NThomas Mingarelli <thomas.mingarelli@hp.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Support watchdog timers built into SiByte MIPS SoCs.
Signed-off-by: NAndy Sharp <andy.sharp@onstor.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

This is a driver for watchdog timer built into TXx9 MIPS SoCs.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>

Adds support for the built-in watchdog on EPIC Nano 7240 boards from IEI.

Tested on Nano-7240RS.

Hardware documentation of the platform (including watchdog) can be found
on the IEI website: http://www.ieiworld.comSigned-off-by: NGilles Gigan <gilles.gigan@gmail.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

This patch adds support for the ITE Tech Inc. IT8712F EC-LPC Super I/O 
chipset found on many Pentium III and AMD motherboards. Developed using code 
from other watchdog drivers and the datasheet on ITE Tech homepage.
Signed-off-by: NJorge Boncompte <jorge@dti2.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Driver for the watchdog timer. Still doesn't reboots the machine
on some boards, but we have improved and cleaned it
Signed-off-by: NMatteo Croce <technoboy85@gmail.com>
Signed-off-by: NNicolas Thill <nico@openwrt.org>
Signed-off-by: NEnrik Berkhan <Enrik.Berkhan@akk.org>
Signed-off-by: NChrister Weinigel <wingel@nano-system.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

move watchdog tree from drivers/char/watchdog to drivers/watchdog.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Clean-up of the watchdog's Kconfig and makefile files.
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Add watchdog support for TI Davinci DM644x/DM646x processors.

Signed-off-by: Vladimir Barinov <vbarinov@ru.mvista.com> 
Signed-off-by: Kevin Hilman <khilman@mvista.com> 
Signed-off-by: Wim Van Sebroeck <wim@iguana.be> 

This patch implements the driver necessary use the Analog Devices
Blackfin processor's on-chip watchdog controller, supports
BF53[123]/BF53[467]/BF54[2489]/BF561.
Signed-off-by: NMike Frysinger <michael.frysinger@analog.com>
Signed-off-by: NBryan Wu <bryan.wu@analog.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Driver for internal mpc5200 watchdog on general purpose timer 0.
For IPB clock of 132 MHz the maximum timeout is about 32 seconds.
Signed-off-by: NDomen Puncer <domen.puncer@telargo.com>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

In order for this driver to be shared across the iop architectures the
iop3xx and iop13xx header files are modified to present a common interface
for the iop_wdt driver.

Details:
* iop13xx supports disabling the timer while iop3xx does not.  This requires
  a few 'compatibility' definitions in include/asm-arm/hardware/iop3xx.h to
  preclude adding #ifdef CONFIG_ARCH_IOP13XX blocks to the driver code.
* The heartbeat interval is derived from the internal bus clock rate, so this
  this patch also exports the tick rate to the iop_wdt driver.

Cc: Curt Bruns <curt.e.bruns@intel.com>
Cc: Peter Milne <peter.milne@d-tacq.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>