When the SigmaDSP module is built-in, but the I2C core is build as a module
we'll get a undefined reference:

	sound/built-in.o: In function `sigma_action_write_i2c':
		:(.text+0x5d8d4): undefined reference to `i2c_master_send'

This can happen if a audio driver that is using the regmap SigmaDSP interface is
built into the kernel, but core I2C support is build as a module. To fix this
split the SigmaDSP module into three modules, one module providing the core
infrastructure and two small modules implementing the regmap and I2C interfaces.
This allows e.g. the core infrastructure and regmap support to be built into the
kernel while I2C support can still be build as a module.

Fixes: dab464b6 ("ASoC: Add ADAU1361/ADAU1761 audio CODEC support")
Reported-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds the Realtek ALC5677 codec driver.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The patch adds the RL6231 class device shared support for RT5640, RT5645 and
RT5651. The function of the DMIC clock calculation can be shared by RL6231
shared support.
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the Analog Devices ADAU1381 and ADAU1781 audio
CODECs. The device is a low-power, 24-bit stereo audio CODEC with multiple
analog inputs and outputs, two digital microphone inputs and an I2S interface.
The device can be controlled either using I2C or SPI. The main difference
between the two variants is that the ADAU1781 has a freely programmable SigmaDSP
processor, while the ADAU1381 has a fixed function wind noise reduction filter.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the Analog Devices ADAU1361 and ADAU1761 CODECs.
The device is a a low-power, 24-bit stereo audio CODEC with multiple analog
input and outputs, one digital microphone input and an I2S interface. The device
can be controlled either via I2C or SPI. The main difference between the two
variants is that the ADAU1761 has a built-in SigmaDSP, while the ADAU1361 has
not.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The ADAU1X61 and ADAU1X81 are very similar in the digital domain, but are quite
different in the analog domain. This patch adds support for the common parts of
the ADAU1X61 and ADAU1X81 CODECs.

The patch also restores some of the alphabetical order in the Makfile and
Kconfig.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the Cirrus Logic Low Power Stereo I2C CODEC
Signed-off-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds the Realtek ALC5645 codec driver. It is the base
version that because the jack detect function is not implemented to
it, the headphone and AMIC1 are not workable. We will fill up the
further functions later.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NOder Chiou <oder_chiou@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds the Realtek ALC5651 codec driver.
Signed-off-by: NBard Liao <bardliao@realtek.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch removes the i2c bus code from the codec driver and creates seperate i2c driver.
Signed-off-by: NBrian Austin <brian.austin@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The TI STA350 is an integrated 2.1-channel power amplifier that is
controllable over I2C. This patch adds an ASoC driver for it.

At a glance, this chip is very similar to the STA320 for which a driver
already exists. In details, however, the register maps contain subtle
differences which made a whole new driver easier to write and maintain.

[daniel@zonque.org: cleanups, DT property rework, rebased on asoc-next]
Signed-off-by: NSven Brandau <brandau@gmx.de>
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the Cirrus Logic CS42448/CS42888 Audio CODEC that
has six/four 24-bit AD and eight 24-bit DA converters.

[ CS42448/CS42888 supports both I2C and SPI control ports. As initial patch,
  this patch only adds the support for I2C. ]
Signed-off-by: NNicolin Chen <Guangyu.Chen@freescale.com>
Acked-by: NBrian Austin <brian.austin@cirrus.com>
Acked-by: NPaul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This commit adds a bare bones driver support for TLV320AIC31XX family
audio codecs. The driver adds basic stereo playback trough headphone
and speaker outputs and mono capture trough microphone inputs.

The driver is currently missing support at least for mini DSP features
and jack detection. I have tested the driver only on TLV320AIC3111,
but based on the data sheets TLV320AIC3100, TLV320AIC3110, and
TLV320AIC3120 should work Ok too.

The base for the implementation was taken from:
git@gitorious.org:ti-codecs/ti-codecs.git ajitk/topics/k3.10.1-aic31xx
-branch at commit 77504eba0294764e9e63b4a0c696b44db187cd13.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

The tlv320aic32x4 related lines were wrongly placed after tlv320aic3x lines.
Signed-off-by: NJyri Sarha <jsarha@ti.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Move to the new style of defining the bus interfaces in separate modules
in order to simplify dependencies.
Signed-off-by: NMark Brown <broonie@linaro.org>

tlv320aic23 chip control interface may work in either I2C or SPI mode
depending on the MODE pin state. Functionality and register layout are
independent of the control mode.

Implement bus-specific parts as separate modules.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

SiRF internal audio codec is integrated in SiRF atlas6 and prima2 SoC.
Features include:
1. Stereo DAC and ADC with 16-bit resolution amd 48KHz sample rate
2. Support headphone and/or speaker output
3. Integrate headphone and speaker output amp
4. Support LINE and MIC input
5. Support single ended and differential input mode
Signed-off-by: NRongjun Ying <rongjun.ying@csr.com>
--v5:
1. Drop all inlines.
2. Reordering the Kconfig and Makefile
3. Remove the sirf_audio_codec_reg_bits struct, use the new controls instead it.
4. Add some SND_SOC_DAPM_OUT_DRV instead of HP and SPK enable driver
5. Add audio codec clock supply instead of adc event callback
6. Fixed playback and capture can't concurrent work bug.

--
 .../devicetree/bindings/sound/sirf-audio-codec.txt |   17 +
 sound/soc/codecs/Kconfig                           |    5 +
 sound/soc/codecs/Makefile                          |    1 +
 sound/soc/codecs/sirf-audio-codec.c                |  533 ++++++++++++++++++++
 sound/soc/codecs/sirf-audio-codec.h                |   75 +++
 5 files changed, 631 insertions(+), 0 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/sirf-audio-codec.txt
 create mode 100644 sound/soc/codecs/sirf-audio-codec.c
 create mode 100644 sound/soc/codecs/sirf-audio-codec.h
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds support for the ADAU1977, ADAU1978 and ADAU1979 audio CODEC
devices. They are a family of 4-channel differential input audio ADC devices.
They can be connected to either a SPI or I2C bus. The driver is implemented in
three modules, one main module (adau1977.ko) which implements the device logic
and one module each for SPI (adau1977-spi.ko) and I2C (adau1977-i2c.ko) bus
access.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
    * We need to be extra careful to make sure to not build the driver into the
      kernel if one of the subsystems is build as a module (Currently only I2C
      can be build as a module).
    * The module init path error handling is rather ugly. E.g. what should be
      done if either the SPI or the I2C driver fails to register. Most drivers
      that implement SPI and I2C in the same module currently fallback to
      undefined behavior in that case. Splitting the the driver into two
      modules, one for each bus, allows the registration of the other bus drive
      to continue without problems if one of them fails.

This patch splits the ADAV80X driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
    * We need to be extra careful to make sure to not build the driver into the
      kernel if one of the subsystems is build as a module (Currently only I2C
      can be build as a module).
    * The module init path error handling is rather ugly. E.g. what should be
      done if either the SPI or the I2C driver fails to register? Most drivers
      that implement SPI and I2C in the same module currently fallback to
      undefined behavior in that case. Splitting the the driver into two
      modules, one for each bus allows the registration of the other bus driver
      to continue without problems if one of them fails.

This patch splits the ssm2602 driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.

While we are at it also cleanup the include section of the ssm2602 driver and
remove unneeded includes.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

There are a few known (minor) problems with having the support code for both I2C
and SPI in the same module:
    * We need to be extra careful to make sure to not build the driver into the
      kernel if one of the subsystems is build as a module (Currently only I2C
      can be build as a module).
    * The module init path error handling is rather ugly. E.g. what should be
      done if either the SPI or the I2C driver fails to register? Most drivers
      that implement SPI and I2C in the same module currently fallback to
      undefined behavior in that case. Splitting the the driver into two
      modules, one for each bus, allows the registration of the other bus driver
      to continue without problems if one of them fails.

This patch splits the AD193X driver into 3 modules. One core module that
implements the device logic, but is independent of the bus method used. And one
module for SPI and I2C each that registers the drivers and sets up the regmap
struct for the bus.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@linaro.org>

The PCM512x devices are a family of monolithic CMOS integrated circuits
that include a stereo digital-to-analog converter and additional support
circuitry.

This is an initial driver which supports some core functionality for the
device which covers common use cases but does not cover all features.
Currently only slave clocking modes with automatic clock configuration
are supported and most of the DSP configuration for the device is not
enabled.
Signed-off-by: NMark Brown <broonie@linaro.org>

The wm8997 is a compact, high-performance audio hub CODEC with SLIMbus
interfacing, for smartphones, tablets and other portable audio devices
based on the Arizona platform.

This patch adds the wm8997 CODEC driver.

[Fixed some interface churn from bitrot due to the patch not going via
the MFD tree as expected -- broonie]
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

Add PCM1792A spi mode codec support. This version implements only
a subset of functionalities. Tested connect to a pandaboard ES
device and based on recently pcm1681 codec.
Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

PCM1681 can be controlled via I2C, SPI or in bootstrap mode (no control mode). This code add
support only for I2C mode.
Signed-off-by: NMarek Belisko <marek.belisko@streamunlimited.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

ak4554 is very simple DA/AD converter which has no setting register.
Note that it has hard coded asymmetric data format
playback : SND_SOC_DAIFMT_RIGHT_J
capture  : SND_SOC_DAIFMT_LEFT_J
This driver has single DAI and doesn't have set_fmt.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds the ALC5640 codec driver.
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NBard Liao <bardliao@realtek.com>
Tested-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

to support HDMI on CSR SiRFprimaII and atlasVI, we need one more HDMI pseudo
codec, rather than add a new driver, we can make omap HDMI codec common for
other SoCs as well. then the omap-hdmi codec becomes a generic HDMI pseudo-
codec as HDMI audio features depend on HDMI specification not on SoCs.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NMark Brown <broonie@linaro.org>

This patch adds a ASoC CODEC driver for the SSM2516. The SSM2516 is a stereo
Class-D audio amplifier with an I2S interface for audio in and a built-in
dynamic range control processor.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

DFBM-CS320 is only one of bluetooth modules using CSR bluetooth chips,
we don't want everyone to have a seperate codec driver. anyway, the
feature of Bluetooth SCO is same on all platforms, so this patch
makes the DFBM-CS320 driver become a common BT SCO link driver.
Signed-off-by: NBarry Song <Baohua.Song@csr.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Transceiver usually means receiver + transmitter. This codec can do only
transmit. Update driver accordingly.
Signed-off-by: NMarek Belisko <marek.belisko@streamunlimited.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds a driver for TI's TA5086 6-channel PWM processor.

This chip has a very unusual register layout, specifically because the
registers are of unequal size, and multi-byte registers require bulk
writes to take effect. Regmap does not support these kind of mappings.

Currently, the driver does not touch any of the registers >= 0x20, so
it doesn't matter, because the register map is mapped to an 8-bit array.
In case more features will be added in the future that require access
to higher registers, the entire regmap H/W I/O routines have to be
open-coded.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Adds a driver for Asahi Kasei's AK5386 Single-ended 24-Bit 192kHz
delta-sigma ADC. The device has no control port interface but an
optional RESET/PDN GPIO pin.
Signed-off-by: NDaniel Mack <zonque@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for the Dialog DA7213 audio codec.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch completes the replacement of the existing max98090 driver,
by installing a more complete driver.
Signed-off-by: NJerry Wong <jerry.wong@maximintegrated.com>
Tested-by: NMatthew Mowdy <matthew.mowdy@maximintegrated.com>
Reviewed-by: NRalph Birt <ralph.birt@maximintegrated.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch removes the existing max98090 driver prior to installing a more
complete one.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds the max98090 codec prototype driver.
It supports Headphone only at this point.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Many current Wolfson devices feature DSPs based around an architecture
known as ADSP.  Since there is a lot of commonality in the system
integration of these devices a common library will be used to provide
support for them.

This version provides equivalent support for ADSP1 to that currently
included in the WM2200 driver.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This commit add a sound codec driver for Silicon Laboratories 476x
series of AM/FM radio chips.
Signed-off-by: NAndrey Smirnov <andrey.smirnov@convergeddevices.net>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for Dialog semiconductor's DA9055 audio codec.

This has been tested on DA9055 EVB with Samsung SMDK6410 board.
Signed-off-by: NAshish Chavan <ashish.chavan@kpitcummins.com>
Signed-off-by: NDavid Dajun Chen <david.chen@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>