Commit 567b21e9
"mips: convert vpe_class to use dev_groups"

broke the build on MIPS since vpe_attrs should be an array
of 'struct device_attribute' pointers.

Fixes the following build problem:
arch/mips/kernel/vpe.c:1372:2: error: missing braces around initializer
[-Werror=missing-braces]
arch/mips/kernel/vpe.c:1372:2: error: (near initialization for 'vpe_attrs[0]')
[-Werror=missing-braces]

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5819/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

After the last architecture switched to generic hard irqs the config
options HAVE_GENERIC_HARDIRQS & GENERIC_HARDIRQS and the related code
for !CONFIG_GENERIC_HARDIRQS can be removed.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The TCBIND register is only available if the core has MT support. It
should not be read otherwise. Secondly, the number of TCs (siblings)
are calculated differently depending on if the kernel is configured
as SMVP or SMTC.
Signed-off-by: NLeonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5822/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This change complements commit d0da7c002f7b2a93582187a9e3f73891a01d8ee4
and brings clear_ioasic_irq back, renaming it to clear_ioasic_dma_irq at
the same time, to make I/O ASIC DMA interrupts functional.

Unlike ordinary I/O ASIC interrupts DMA interrupts need to be deasserted
by software by writing 0 to the respective bit in I/O ASIC's System
Interrupt Register (SIR), similarly to how CP0.Cause.IP0 and CP0.Cause.IP1
bits are handled in the CPU (the difference is SIR DMA interrupt bits are
R/W0C so there's no need for an RMW cycle).  Otherwise the handler is
reentered over and over again.

The only current user is the DEC LANCE Ethernet driver and its extremely
uncommon DMA memory error handler that does not care when exactly the
interrupt is cleared.  Anticipating the use of DMA interrupts by the Zilog
SCC driver this change however exports clear_ioasic_dma_irq for device
drivers to choose the right application-specific sequence to clear the
request explicitly rather than calling it implicitly in the .irq_eoi
handler of `struct irq_chip'.  Previously these interrupts were cleared in
the .end handler of the said structure, before it was removed.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5826/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Not all I/O ASIC versions have the free-running counter implemented, an
early revision used in the 5000/1xx models aka 3MIN and 4MIN did not have
it.  Therefore we cannot unconditionally use it as a clock source.
Fortunately if not implemented its register slot has a fixed value so it
is enough if we check for the value at the end of the calibration period
being the same as at the beginning.

This also means we need to look for another high-precision clock source on
the systems affected.  The 5000/1xx can have an R4000SC processor
installed where the CP0 Count register can be used as a clock source.
Unfortunately all the R4k DECstations suffer from the missed timer
interrupt on CP0 Count reads erratum, so we cannot use the CP0 timer as a
clock source and a clock event both at a time.  However we never need an
R4k clock event device because all DECstations have a DS1287A RTC chip
whose periodic interrupt can be used as a clock source.

This gives us the following four configuration possibilities for I/O ASIC
DECstations:

1. No I/O ASIC counter and no CP0 timer, e.g. R3k 5000/1xx (3MIN).

2. No I/O ASIC counter but the CP0 timer, i.e. R4k 5000/150 (4MIN).

3. The I/O ASIC counter but no CP0 timer, e.g. R3k 5000/240 (3MAX+).

4. The I/O ASIC counter and the CP0 timer, e.g. R4k 5000/260 (4MAX+).

For #1 and #2 this change stops the I/O ASIC free-running counter from
being installed as a clock source of a 0Hz frequency.  For #2 it also
arranges for the CP0 timer to be used as a clock source rather than a
clock event device, because having an accurate wall clock is more
important than a high-precision interval timer.  For #3 there is no
change.  For #4 the change makes the I/O ASIC free-running counter
installed as a clock source so that the CP0 timer can be used as a clock
event device.

Unfortunately the use of the CP0 timer as a clock event device relies on a
succesful completion of c0_compare_interrupt.  That never happens, because
while waiting for a CP0 Compare interrupt to happen the function spins in
a loop reading the CP0 Count register.  This makes the CP0 Count erratum
trigger reliably causing the interrupt waited for to be lost in all cases.
As a result #4 resorts to using the CP0 timer as a clock source as well,
just as #2.  However we want to keep this separate arrangement in case
(hope) c0_compare_interrupt is eventually rewritten such that it avoids
the erratum.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5825/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

We have the build infrastructure to generate uImages so we should ignore
the resulting generated files.
Signed-off-by: NMark Brown <broonie@linaro.org>
Acked-by: NMike Frysinger <vapier@gentoo.org>

- Enable GMAC
- Set propler DMA PBL
- Disable DMA store and forward mode
- Select PTP input clock from MII
clock.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NSteven Miao <realmz6@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>

Signed-off-by: NScott Jiang <scott.jiang.linux@gmail.com>

Signed-off-by: NSteven Miao <realmz6@gmail.com>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>

If SCB exists in select blackfin cpu, developer can change the SCB
priority in kernel configuration.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NSteven Miao <realmz6@gmail.com>

The x86 fault handler bails in the middle of error handling when the
task has a fatal signal pending.  For a subsequent patch this is a
problem in OOM situations because it relies on pagefault_out_of_memory()
being called even when the task has been killed, to perform proper
per-task OOM state unwinding.

Shortcutting the fault like this is a rather minor optimization that
saves a few instructions in rare cases.  Just remove it for
user-triggered faults.

Use the opportunity to split the fault retry handling from actual fault
errors and add locking documentation that reads suprisingly similar to
ARM's.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unlike global OOM handling, memory cgroup code will invoke the OOM killer
in any OOM situation because it has no way of telling faults occuring in
kernel context - which could be handled more gracefully - from
user-triggered faults.

Pass a flag that identifies faults originating in user space from the
architecture-specific fault handlers to generic code so that memcg OOM
handling can be improved.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Kernel faults are expected to handle OOM conditions gracefully (gup,
uaccess etc.), so they should never invoke the OOM killer.  Reserve this
for faults triggered in user context when it is the only option.

Most architectures already do this, fix up the remaining few.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memcg code can trap tasks in the context of the failing allocation
until an OOM situation is resolved.  They can hold all kinds of locks
(fs, mm) at this point, which makes it prone to deadlocking.

This series converts memcg OOM handling into a two step process that is
started in the charge context, but any waiting is done after the fault
stack is fully unwound.

Patches 1-4 prepare architecture handlers to support the new memcg
requirements, but in doing so they also remove old cruft and unify
out-of-memory behavior across architectures.

Patch 5 disables the memcg OOM handling for syscalls, readahead, kernel
faults, because they can gracefully unwind the stack with -ENOMEM.  OOM
handling is restricted to user triggered faults that have no other
option.

Patch 6 reworks memcg's hierarchical OOM locking to make it a little
more obvious wth is going on in there: reduce locked regions, rename
locking functions, reorder and document.

Patch 7 implements the two-part OOM handling such that tasks are never
trapped with the full charge stack in an OOM situation.

This patch:

Back before smart OOM killing, when faulting tasks were killed directly on
allocation failures, the arch-specific fault handlers needed special
protection for the init process.

Now that all fault handlers call into the generic OOM killer (see commit
609838cf: "mm: invoke oom-killer from remaining unconverted page
fault handlers"), which already provides init protection, the
arch-specific leftovers can be removed.
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Acked-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: azurIt <azurit@pobox.sk>
Acked-by: Vineet Gupta <vgupta@synopsys.com>	[arch/arc bits]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Keep arch/arm/Kconfig select statements sorted alphabetically.  I've
added a comment at the bottom of the main bank for CONFIG_ARM to this
effect so hopefully this will keep things more in order.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The A20-olinuxino-micro has the EMAC wired in. Enable it in the DT so
that we can use it.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The Cubieboard2, just like its A10 counterpart, has the Ethernet wired
in. Enable it in the DT.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The A20 has several muxing options for the EMAC. Yet, the currently
supported boards only use one set of them. Add that pin set to the DTSI.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

The Allwinner A20 SoC also have the EMAC found on the A10 and A10s.
Enable the support for it in the DTSI.
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Commit 05b016ec "ARC: Setup Vector Table Base in early boot" moved
the Interrupt vector Table setup out of arc_init_IRQ() which is called
for all CPUs, to entry point of boot cpu only, breaking booting of others.

Fix by adding the same to entry point of non-boot CPUs too.

read_arc_build_cfg_regs() printing IVT Base Register didn't help the
casue since it prints a synthetic value if zero which is totally bogus,
so fix that to print the exact Register.

[vgupta: Remove the now stale comment from header of arc_init_IRQ and
also added the commentary for halt-on-reset]

Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Cc: <stable@vger.kernel.org> #3.11
Signed-off-by: NNoam Camus <noamc@ezchip.com>
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There was a bug in the handling of SNB-EP/IVB-EP uncore PCI
fixed counters, e.g., IMC.

It would cause erratic values to be returned for the IMC
clockticks event. This was due to a bogus hwc->config value
which was then written to PCI config space.

The erratic values can be seen via:

  $ perf stat -a -C 0 -e uncore_imc_0/clockticks/ -I 1000 sleep 10

The fixed counter has most fields marked as reserved with
hw reset values of 0. Yet the kernel was defaulting to a
hwc->config = ~0 and that was causing the issues.

This patch sets the hwc->config values for fixed uncore event
to 0. Now, the values of IMC clockticks is correct.
Signed-off-by: NStephane Eranian <eranian@google.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: peterz@infradead.org
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/20130909195350.GA17643@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The IvyBridge event CYCLE_ACTIVITY:CYCLES_LDM_PENDING can only
be measured on counters 0-3 when HT is off. When HT is on, you
only have counters 0-3.

If you program it on the eight counters for 1s on a 3GHz
IVB laptop running a noploop, you see:

           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
           2 747 527 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING
       3 280 563 608 CYCLE_ACTIVITY:CYCLES_LDM_PENDING

Clearly the last 4 values are bogus.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: peterz@infradead.org
Cc: ak@linux.intel.com
Cc: zheng.z.yan@intel.com
Cc: dhsharp@google.com
Link: http://lkml.kernel.org/r/20130911152222.GA28761@google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Modify the s390 copy_oldmem_page() and remap_oldmem_pfn_range() function
for zfcpdump to read from the HSA memory if memory below HSA_SIZE bytes is
requested.  Otherwise real memory is used.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Introduce the s390 specific way to map pages from oldmem.  The memory area
below OLDMEM_SIZE is mapped with offset OLDMEM_BASE.  The other old memory
is mapped directly.
Signed-off-by: NJan Willeke <willeke@de.ibm.com>
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Exchange the old relocate mechanism with the new arch function call
override mechanism that allows to create the ELF core header in the 2nd
kernel.
Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Jan Willeke <willeke@de.ibm.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With the general-instruction extension facility (z10) a couple of
instructions with a pc-relative long displacement were introduced.  The
kprobes support for these instructions however was never implemented.

In result, if anybody ever put a probe on any of these instructions the
result would have been random behaviour after the instruction got executed
within the insn slot.

So lets add the missing handling for these instructions.  Since all of the
new instructions have 32 bit signed displacement the easiest solution is
to allocate an insn slot that is within the same 2GB area like the
original instruction and patch the displacement field.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I found the following pattern that leads in to interesting findings:

  grep -r "ret.*|=.*__put_user" *
  grep -r "ret.*|=.*__get_user" *
  grep -r "ret.*|=.*__copy" *

The __put_user() calls in compat_ioctl.c, ptrace compat, signal compat,
since those appear in compat code, we could probably expect the kernel
addresses not to be reachable in the lower 32-bit range, so I think they
might not be exploitable.

For the "__get_user" cases, I don't think those are exploitable: the worse
that can happen is that the kernel will copy kernel memory into in-kernel
buffers, and will fail immediately afterward.

The alpha csum_partial_copy_from_user() seems to be missing the
access_ok() check entirely.  The fix is inspired from x86.  This could
lead to information leak on alpha.  I also noticed that many architectures
map csum_partial_copy_from_user() to csum_partial_copy_generic(), but I
wonder if the latter is performing the access checks on every
architectures.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

_PAGE_SOFT_DIRTY bit should never be set on present pte so add VM_BUG_ON
to catch any potential future abuse.

Also add a comment on _PAGE_SWP_SOFT_DIRTY definition explaining scope of
its usage.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Acked-by: NJan Beulich <jbeulich@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Currently hugepage migration works well only for pmd-based hugepages
(mainly due to lack of testing,) so we had better not enable migration of
other levels of hugepages until we are ready for it.

Some users of hugepage migration (mbind, move_pages, and migrate_pages) do
page table walk and check pud/pmd_huge() there, so they are safe.  But the
other users (softoffline and memory hotremove) don't do this, so without
this patch they can try to migrate unexpected types of hugepages.

To prevent this, we introduce hugepage_migration_support() as an
architecture dependent check of whether hugepage are implemented on a pmd
basis or not.  And on some architecture multiple sizes of hugepages are
available, so hugepage_migration_support() also checks hugepage size.
Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Hillf Danton <dhillf@gmail.com>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The previous patch doing vmstats for TLB flushes ("mm: vmstats: tlb flush
counters") effectively missed UP since arch/x86/mm/tlb.c is only compiled
for SMP.

UP systems do not do remote TLB flushes, so compile those counters out on
UP.

arch/x86/kernel/cpu/mtrr/generic.c calls __flush_tlb() directly.  This is
probably an optimization since both the mtrr code and __flush_tlb() write
cr4.  It would probably be safe to make that a flush_tlb_all() (and then
get these statistics), but the mtrr code is ancient and I'm hesitant to
touch it other than to just stick in the counters.

[akpm@linux-foundation.org: tweak comments]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I was investigating some TLB flush scaling issues and realized that we do
not have any good methods for figuring out how many TLB flushes we are
doing.

It would be nice to be able to do these in generic code, but the
arch-independent calls don't explicitly specify whether we actually need
to do remote flushes or not.  In the end, we really need to know if we
actually _did_ global vs.  local invalidations, so that leaves us with few
options other than to muck with the counters from arch-specific code.
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When adding cpuidle support to pSeries, we introduced two
regressions:

  - The new cpuidle backend driver only works under hypervisors
    supporting the "SLPLAR" option, which isn't the case of the
    old POWER4 hypervisor and the HV "light" used on js2x blades

  - The cpuidle driver registers fairly late, meaning that for
    a significant portion of the boot process, we end up having
    all threads spinning. This slows down the boot process and
    increases the overall resource usage if the hypervisor has
    shared processors.

This fixes both by implementing a "default" idle that will cede
to the hypervisor when possible, in a very simple way without
all the bells and whisles of cpuidle.
Reported-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NVaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Acked-by: NDeepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org>

While cross-building for PPC64 I've got

WARNING: vmlinux.o(.text.unlikely+0x1ba): Section mismatch in
reference from the function .prom_rtas_call() to the variable
.init.data:dt_string_start The function .prom_rtas_call() references
the variable __initdata dt_string_start.  This is often because
.prom_rtas_call lacks a __initdata annotation or the annotation of
dt_string_start is wrong.

WARNING: vmlinux.o(.meminit.text+0xeb0): Section mismatch in reference
from the function .free_area_init_core.isra.47() to the function
.init.text:.set_pageblock_order() The function __meminit
.free_area_init_core.isra.47() references a function __init
.set_pageblock_order().  If .set_pageblock_order is only used by
.free_area_init_core.isra.47 then annotate .set_pageblock_order with a
matching annotation.

Fix it by proper annotation of prom_rtas_call.
Signed-off-by: NVladimir Murzin <murzin.v@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

 stack_grow_into/14082 is trying to acquire lock:
  (&mm->mmap_sem){++++++}, at: [<c000000000206d28>] .might_fault+0x78/0xe0

 but task is already holding lock:
  (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(&mm->mmap_sem);
   lock(&mm->mmap_sem);

  *** DEADLOCK ***

  May be due to missing lock nesting notation

 1 lock held by stack_grow_into/14082:
  #0:  (&mm->mmap_sem){++++++}, at: [<c0000000007ffd8c>] .do_page_fault+0x24c/0x910

 stack backtrace:
 CPU: 21 PID: 14082 Comm: stack_grow_into Not tainted 3.10.0-10.el7.ppc64.debug #1
 Call Trace:
 [c0000003d396b850] [c000000000016e7c] .show_stack+0x7c/0x1f0 (unreliable)
 [c0000003d396b920] [c000000000813fc8] .dump_stack+0x28/0x3c
 [c0000003d396b990] [c000000000124b90] .__lock_acquire+0x1640/0x1800
 [c0000003d396bab0] [c00000000012570c] .lock_acquire+0xac/0x250
 [c0000003d396bb80] [c000000000206d54] .might_fault+0xa4/0xe0
 [c0000003d396bbf0] [c0000000007ffe2c] .do_page_fault+0x2ec/0x910
 [c0000003d396be30] [c0000000000092e8] handle_page_fault+0x10/0x30
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

powerpc allmodconfig build fails with:

ERROR: ".cpu_to_chip_id" [drivers/block/mtip32xx/mtip32xx.ko] undefined!

The problem was introduced with commit 15863ff3 (powerpc: Make chip-id
information available to userspace).

Export the missing symbol.

Cc: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Cc: Shivaprasad G Bhat <sbhat@linux.vnet.ibm.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Convert the remaining couple of random shrinkers in the tree to the new
API.
Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NGlauber Costa <glommer@openvz.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Cc: Arve Hjønnevåg <arve@android.com>
Cc: Carlos Maiolino <cmaiolino@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Rientjes <rientjes@google.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: J. Bruce Fields <bfields@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Kent Overstreet <koverstreet@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Olof Johansson reports that the tests against HZ_FIXED seem
non-functional.  Fix this by using '0' as a sentinel for "not
specified" and test against that instead.
Reported-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The mn10300 kernel crashes just after starting userspace programs, if
CONFIG_PREEMPT is disabled:

  Freeing unused kernel memory: 96K (90286000 - 9029e000)
  MISALIGN: 97c33ff9: unsupported instruction f
  MISALIGN: 97c33ff9: unsupported instruction f
  MISALIGN: 97c33ff9: unsupported instruction f
  :

This fixes the problem that was introduced by commit d17fc238
("MN10300: Enable IRQs more in system call exit work path").
Signed-off-by: NAkira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: NKiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>