Sort the header inclusion lines by alphabetical order.

While here, update Intel Copyright.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The commit d56d6b3d ("gpio: langwell: add Intel Merrifield support")
doesn't look at all as a proper support for Intel Merrifield and I dare to say
that it distorts the behaviour of the hardware.

The register map is different on Intel Merrifield, i.e. only 6 out of 8
register have the same purpose but none of them has same location in the
address space. The current case potentially harmful to existing hardware since
it's poking registers on wrong offsets and may set some pin to be GPIO output
when connected hardware doesn't expect such.

Besides the above GPIO and pinctrl on Intel Merrifield have been located in
different IP blocks. The functionality has been extended as well, i.e. added
support of level interrupts, special registers for wake capable sources and
thus, in my opinion, requires a completele separate driver.

If someone wondering the existing gpio-intel-mid.c would be converted to actual
pinctrl (which by the fact it is now), though I wouldn't be a volunteer to do
that.

Fixes: d56d6b3d ("gpio: langwell: add Intel Merrifield support")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The error handling is not correct since the commit 3f7dbfd8 ("gpio:
intel-mid: switch to using gpiolib irqchip helpers"). Switch to devres API to
fix the potential resource leak.

Fixes: commit 3f7dbfd8 ("gpio: intel-mid: switch to using gpiolib irqchip helpers")
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Cc: David Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

As we want gpio_chip .get() calls to be able to return negative
error codes and propagate to drivers, we need to go over all
drivers and make sure their return values are clamped to [0,1].
We do this by using the ret = !!(val) design pattern.
Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The name .dev in a struct is normally reserved for a struct device
that is let us say a superclass to the thing described by the struct.
struct gpio_chip stands out by confusingly using a struct device *dev
to point to the parent device (such as a platform_device) that
represents the hardware. As we want to give gpio_chip:s real devices,
this is not working. We need to rename this member to parent.

This was done by two coccinelle scripts, I guess it is possible to
combine them into one, but I don't know such stuff. They look like
this:

@@
struct gpio_chip *var;
@@
-var->dev
+var->parent

and:

@@
struct gpio_chip var;
@@
-var.dev
+var.parent

and:

@@
struct bgpio_chip *var;
@@
-var->gc.dev
+var->gc.parent

Plus a few instances of bgpio that I couldn't figure out how
to teach Coccinelle to rewrite.

This patch hits all over the place, but I *strongly* prefer this
solution to any piecemal approaches that just exercise patch
mechanics all over the place. It mainly hits drivers/gpio and
drivers/pinctrl which is my own backyard anyway.

Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Rafał Miłecki <zajec5@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Cc: Alek Du <alek.du@intel.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Acked-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Acked-by: NJiri Kosina <jkosina@suse.cz>
Acked-by: NHans-Christian Egtvedt <egtvedt@samfundet.no>
Acked-by: NJacek Anaszewski <j.anaszewski@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Most interrupt flow handlers do not use the irq argument. Those few
which use it can retrieve the irq number from the irq descriptor.

Remove the argument.

Search and replace was done with coccinelle and some extra helper
scripts around it. Thanks to Julia for her help!
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: Jiang Liu <jiang.liu@linux.intel.com>

This switches the Intel MID GPIO driver over to using the gpiolib
irqchip helpers in the gpiolib core.

Cc: xinhui.pan <xinhuiX.pan@intel.com>
Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This switches all GPIO and pin control drivers with irqchips
that were using .startup() and .shutdown() callbacks to lock
GPIO lines for IRQ usage over to using the .request_resources()
and .release_resources() callbacks just introduced into the
irqchip vtable.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jean-Jacques Hiblot <jjhiblot@traphandler.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

intel_gpio_runtime_idle should return correct error code if it do fail.
make it more correct even though -EBUSY is the most possible return value.
Signed-off-by: Nbo.he <bo.he@intel.com>
Signed-off-by: Nxinhui.pan <xinhuiX.pan@intel.com>
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This is a simple cleanup on gpio-intel-mid.c's header comments.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This uses the new API for tagging GPIO lines as in use by
IRQs. This enforces a few semantic checks on how the underlying
GPIO line is used.

ChangeLog v1->v2:
- Explicitly call the - empty - mask/unmask functions from the
  startup/shutdown hooks. These are currently empty, but maybe
  they will not be that forever, so better be safe than sorry.
Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This switches the two members of struct gpio_chip that were
defined as unsigned foo:1 to bool, because that is indeed what
they are. Switch all users in the gpio and pinctrl subsystems
to assign these values with true/false instead of 0/1. The
users outside these subsystems will survive since true/false
is 1/0, atleast we set some kind of more strict typing example.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Don't use DEFINE_PCI_DEVICE_TABLE macro, because this macro
is not preferred.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Switch all users of irq_set_chip_and_handler_name() to simply
use irq_set_chip_and_handler(), all just provide a boilerplate
name like "demux" or "mux" - a fact which is anyway obvious
from the hwirq number from the irqdomain now present in e.g.
/proc/interrupts.

Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Rename the argument "virq" to just "irq", this IRQ isn't any
more "virtual" than any other Linux IRQ number, we use "hwirq"
for the actual hw-numbers, "virq" is just bogus.
Acked-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

After file was renamed from gpio-langwell to gpio-intel-mid, this patch
updates the variables, functions and structs to be based on intel-mid
instead of langwell.

There is no function change.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

gpio-langwell is a deprecated name. Despite the driver was made
initially for Langwell, it supports now other Intel Mid SoC's.

This patch does no change beside the file renaming with Kconfig/Makefile
update.
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch implements a better way to handle multiple SoC's and adds
Intel Merrifield support to gpio-langwell.

It was based on previous work from Ning Li <ning.li@intel.com>
Signed-off-by: NDavid Cohen <david.a.cohen@linux.intel.com>
Signed-off-by: NFei Yang <fei.yang@intel.com>
Signed-off-by: NNing Li <ning.li@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

It seems there is no user of the wp_gpio driver in the kernel. Let's remove it.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The "runtime idle" helper routine, rpm_idle(), currently ignores
return values from .runtime_idle() callbacks executed by it.
However, it turns out that many subsystems use
pm_generic_runtime_idle() which checks the return value of the
driver's callback and executes pm_runtime_suspend() for the device
unless that value is not 0.  If that logic is moved to rpm_idle()
instead, pm_generic_runtime_idle() can be dropped and its users
will not need any .runtime_idle() callbacks any more.

Moreover, the PCI, SCSI, and SATA subsystems' .runtime_idle()
routines, pci_pm_runtime_idle(), scsi_runtime_idle(), and
ata_port_runtime_idle(), respectively, as well as a few drivers'
ones may be simplified if rpm_idle() calls rpm_suspend() after 0 has
been returned by the .runtime_idle() callback executed by it.

To reduce overall code bloat, make the changes described above.
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NKevin Hilman <khilman@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NKevin Hilman <khilman@linaro.org>
Reviewed-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NAlan Stern <stern@rowland.harvard.edu>

Since the type of the reg_base member is void __iomem * we don't need to have
explicit casting in gpio_reg() and gpio_reg_2bit().

Update year in the copyright notice as well.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

There is no need to use hardcoded device name in the error messages, because
dev_err() prefixes the message with the device name anyway.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This makes the error handling much more simpler than open-coding everything and
in addition makes the probe function smaller an tidier.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NDavid Cohen <david.a.cohen@intel.com>
[Rebased on the platform-data set to NULL removal patch]
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

We better to use readl() function instead of bad looking direct access.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

Otherwise we will end up with traceback from LOCKDEP:

INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0-rc2-next-20130521-00028-g09aa9fc #487
 00000000 00000000 f6c55c54 c1541fe4 f6040bf8 f6c55c8c c1069ef1 c1726bc1
 c1726cc8 c1726c9e 00000000 f6c584e0 f6c58000 f6c55ce8 00000000 f6040bf8
 f6040bf8 00000046 f6c58000 f6c55d00 c106a18d 00000a2b 00000003 00004f02
Call Trace:
 [<c1541fe4>] dump_stack+0x49/0x77
 [<c1069ef1>] register_lock_class+0x58/0x260
 [<c106a18d>] __lock_acquire+0x94/0xcff
 [<c106adc8>] ? __lock_acquire+0xccf/0xcff
 [<c106b2ad>] lock_acquire+0xcc/0x10d
 [<c1269c7c>] ? lnw_irq_type+0x63/0xe9
 [<c1545da0>] _raw_spin_lock_irqsave+0x32/0x42
 [<c1269c7c>] ? lnw_irq_type+0x63/0xe9
 [<c1269c7c>] lnw_irq_type+0x63/0xe9
 [<c108f454>] __irq_set_trigger+0x98/0x123
 [<c1090225>] irq_set_irq_type+0x2f/0x51
 [<c1090225>] ? irq_set_irq_type+0x2f/0x51
 [<c1269d02>] ? lnw_irq_type+0xe9/0xe9
 [<c1269d34>] lnw_gpio_irq_map+0x32/0x3b
 [<c10914f2>] irq_domain_add_legacy+0xe2/0x107
 [<c1091b53>] irq_domain_add_simple+0x47/0x60
 [<c1269f6e>] lnw_gpio_probe+0x119/0x217
 [<c1271018>] pci_device_probe+0x5a/0x92
...
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The driver core clears the driver data to NULL after device_release
or on probe failure, since commit 0998d063
(device-core: Ensure drvdata = NULL when no driver is bound).
Thus, it is not needed to manually clear the device driver data to NULL.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

When DT is not used IOAPIC does not register irq domain. As result
IOAPIC won't care about gpio-langwell's virq and may cause conflict if
an irq number is equal to gpio-langwell's virq mapped beforehand.

This patch tells gpio_langwell to not ignore irq_base if != 0 and
preferably use it to avoid the conflict.

If DT is used, irq_base can safely be 0.
Signed-off-by: NDavid Cohen <david.a.cohen@intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

This patch cleans up cosmetic issues, remove useless functions and add
to_lnw_priv() macro to replace many usages of container_of().
Signed-off-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Adds support for new Cloverview hardware.
Signed-off-by: NDavid Cohen <david.a.cohen@intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Cc: Peter Tyser <ptyser@xes-inc.com>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Cc: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Peter Tyser <ptyser@xes-inc.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert a 0 error return code to a negative one, as returned elsewhere in the
function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier ret;
expression e,e1,e2,e3,e4,x;
@@

(
if (\(ret != 0\|ret < 0\) || ...) { ... return ...; }
|
ret = 0
)
... when != ret = e1
*x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...);
... when != x = e2
    when != ret = e3
*if (x == NULL || ...)
{
  ... when != ret = e4
*  return ret;
}
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>

The IRQ status register should be re-read after each iteration.
Otherwise the loop misses the interrupt if it gets raised immediately
after handled.
Reported-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

irq_domain already provides a facility to translate from hardware IRQ
numbers to Linux IRQ numbers so use that instead of open-coding the logic
in the driver.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

The boot firmware might leave the registers configured causing interrupts
to happen even when no handler for them is yet registered. Fix this by
clearing the IRQ edge detect registers at init.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Since x86 is using SPARSE_IRQ by default nowadays it means that we need to
allocate IRQ descriptors dynamically using irq_alloc_descs() otherwise the
genirq code fails to convert our irq numbers to suitable descriptors.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Use devm_* helper functions where possible to make the error handling in
the probe function simpler.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Alternate function must be zero for the pin to act as
a GPIO.
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>