This patch adds support for async resumptions on input.  To do so, the
transform would return -EINPROGRESS and subsequently invoke the
function xfrm_input_resume to resume processing.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The nhoff field isn't actually necessary in xfrm_input.  For tunnel
mode transforms we now throw away the output IP header so it makes no
sense to fill in the nexthdr field.  For transport mode we can now let
the function transport_finish do the setting and it knows where the
nexthdr field is.

The only other thing that needs the nexthdr field to be set is the
header extraction code.  However, we can simply move the protocol
extraction out of the generic header extraction.

We want to minimise the amount of info we have to carry around between
transforms as this simplifies the resumption process for async crypto.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently x->lastused is u64 which means that it cannot be
read/written atomically on all architectures.  David Miller observed
that the value stored in it is only an unsigned long which is always
atomic.

So based on his suggestion this patch changes the internal
representation from u64 to unsigned long while the user-interface
still refers to it as u64.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch releases the lock on the state before calling
x->type->input.  It also adds the lock to the spots where they're
currently needed.

Most of those places (all except mip6) are expected to disappear with
async crypto.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Similar to the moving out of the replay processing on the output, this
patch moves the integrity stat collectin from x->type->input into
xfrm_input.

This would eventually allow transforms such as AH/ESP to be lockless.

The error value EBADMSG (currently unused in the crypto layer) is used
to indicate a failed integrity check.  In future this error can be
directly returned by the crypto layer once we switch to aead
algorithms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As it is xfrm_input first collects a list of xfrm states on the stack
before storing them in the packet's security path just before it
returns.  For async crypto, this construction presents an obstacle
since we may need to leave the loop after each transform.

In fact, it's much easier to just skip the stack completely and always
store to the security path.  This is proven by the fact that this
patch actually shrinks the code.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of the work on asynchronous cryptographic operations, we need
to be able to resume from the spot where they occur.  As such, it
helps if we isolate them to one spot.

This patch moves most of the remaining family-specific processing into
the common input code.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds support for async resumptions on output.  To do so,
the transform would return -EINPROGRESS and subsequently invoke the
function xfrm_output_resume to resume processing.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As part of the work on asynchrnous cryptographic operations, we need
to be able to resume from the spot where they occur.  As such, it
helps if we isolate them to one spot.

This patch moves most of the remaining family-specific processing into
the common output code.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most callers of the LOCAL_OUT chain will set the IP packet length
before doing so.  They also share the same output function dst_output.

This patch creates a new function called ip6_local_out which does all
of that and converts the appropriate users over to it.

Apart from removing duplicate code, it will also help in merging the
IPsec output path.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Most callers of the LOCAL_OUT chain will set the IP packet length and
header checksum before doing so.  They also share the same output
function dst_output.

This patch creates a new function called ip_local_out which does all
of that and converts the appropriate users over to it.

Apart from removing duplicate code, it will also help in merging the
IPsec output path once the same thing is done for IPv6.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With inter-family transforms the inner mode differs from the outer
mode.  Attempting to handle both sides from the same function means
that it needs to handle both IPv4 and IPv6 which creates duplication
and confusion.

This patch separates the two parts on the input path so that each
function deals with one family only.

In particular, the functions xfrm4_extract_inut/xfrm6_extract_inut
moves the pertinent fields from the IPv4/IPv6 IP headers into a
neutral format stored in skb->cb.  This is then used by the inner mode
input functions to modify the inner IP header.  In this way the input
function no longer has to know about the outer address family.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With inter-family transforms the inner mode differs from the outer
mode.  Attempting to handle both sides from the same function means
that it needs to handle both IPv4 and IPv6 which creates duplication
and confusion.

This patch separates the two parts on the output path so that each
function deals with one family only.

In particular, the functions xfrm4_extract_output/xfrm6_extract_output
moves the pertinent fields from the IPv4/IPv6 IP headers into a
neutral format stored in skb->cb.  This is then used by the outer mode
output functions to write the outer IP header.  In this way the output
function no longer has to know about the inner address family.

Since the extract functions are only called by tunnel modes (the only
modes that can support inter-family transforms), I've also moved the
xfrm*_tunnel_check_size calls into them.  This allows the correct ICMP
message to be sent as opposed to now where you might call icmp_send
with an IPv6 packet and vice versa.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch changes the prototype of ipv4_copy_dscp and ipv6_copy_dscp so
that they directly take the outer DSCP rather than the outer IP header.
This will help us to unify the code for inter-family tunnels.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

RO mode is the only one that requires a locked output function.  So
it's easier to move the lock into that function rather than requiring
everyone else to run under the lock.

In particular, this allows us to move the size check into the output
function without causing a potential dead-lock should the ICMP error
somehow hit the same SA on transmission.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While BEET can theoretically work with IPComp the current code can't
do that because it tries to construct a BEET mode tunnel type which
doesn't (and cannot) exist.  In fact as it is it won't even attach a
tunnel object at all for BEET which is bogus.

To support this fully we'd also need to change the policy checks on
input to recognise a plain tunnel as a legal variant of an optional
BEET transform.

This patch simply fails such constructions for now.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Half of the code in xfrm4_bundle_create and xfrm6_bundle_create are
common.  This patch extracts that logic and puts it into
xfrm_bundle_create.  The rest of it are then accessed through afinfo.

As a result this fixes the problem with inter-family transforms where
we treat every xfrm dst in the bundle as if it belongs to the top
family.

This patch also fixes a long-standing error-path bug where we may free
the xfrm states twice.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the flow construction from the callers of
xfrm_dst_lookup into that function.  It also changes xfrm_dst_lookup
so that it takes an xfrm state as its argument instead of explicit
addresses.

This removes any address-specific logic from the callers of
xfrm_dst_lookup which is needed to correctly support inter-family
transforms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The functions local_addr and remote_addr are more than what they're
needed for.  The same thing can be done easily with flags on the type
object.  This patch does that and simplifies the wrapper functions in
xfrm6_policy accordingly.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Previously we took the device from the bottom route and idev from the
top route.  This is bad because idev may well point to a different
device.  This patch changes it so that we get the idev from the device
directly.

It also makes it an error if either dev or idev is NULL.  This is
consistent with the rest of the routing code which also treats these
cases as errors.

I've removed the err initialisation in xfrm6_policy.c because it
achieves no purpose and hid a bug when an initial version of this
patch neglected to set err to -ENODEV (fortunately the IPv4 version
warned about it).
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The input function should never be invoked on IPsec dst objects.  This
is because we don't apply IPsec on input until after we've made the
routing decision.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The neighbour field is only used by dst_confirm which only ever happens on
the top-most xfrm dst.  So it's a waste to duplicate for every other xfrm
dst.  This patch moves its setting out of the loop so that only the top one
gets set.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have a number of copies of dst_discard scattered around the place
which all do the same thing, namely free a packet on the input or
output paths.

This patch deletes all of them except dst_discard and points all the
users to it.

The only non-trivial bit is decnet where it returns an error.
However, conceptually this is identical to the blackhole functions
used in IPv4 and IPv6 which do not return errors.  So they should
either all return errors or all return zero.  For now I've stuck with
the majority and picked zero as the return value.

It doesn't really matter in practice since few if any driver would
react differently depending on a zero return value or NET_RX_DROP.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The dst member nfheader_len is only used by IPv6.  It's also currently
creating a rather ugly alignment hole in struct dst.  Therefore this patch
moves it from there into struct rt6_info.

It also reorders the fields in rt6_info to minimize holes.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently we use x->props.header_len when resizing on output.
However, if we're resizing at all we might as well go the whole hog
and do it for the whole dst.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We only need to set nfheader_len in the top xfrm dst.  This is because
we only ever read the nfheader_len from the top xfrm dst.

It is also easier to count nfheader_len as part of header_len which
then lets us remove the ugly wrapper functions for incrementing and
decrementing header lengths in xfrm6_policy.c.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Many-many code in the kernel initialized the timer->function
and  timer->data together with calling init_timer(timer). There
is already a helper for this. Use it for networking code.

The patch is HUGE, but makes the code 130 lines shorter
(98 insertions(+), 228 deletions(-)).
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Acked-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add raw drops counter for IPv6 in /proc/net/raw6 .
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add raw drops counter for IPv4 in /proc/net/raw .
Signed-off-by: NWang Chen <wangchen@cn.fujitsu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAdrian Bunk <bunk@kernel.org>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thanks to YOSHIFUJI Hideaki for the hint!
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Support for network splice receive.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For release Linux removed this warning, but we want it
back for development.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

An IPoIB subnet on an IB fabric that spans multiple IB subnets can't
use link-local scope in multicast GIDs.  The existing routines that
map IP/IPv6 multicast addresses into IB link-level addresses hard-code
the scope to link-local, and they also leave the partition key field
uninitialised.  This patch adds a parameter (the link-level broadcast
address) to the mapping routines, allowing them to initialise both the
scope and the P_Key appropriately, and fixes up the call sites.

The next step will be to add a way to configure the scope for an IPoIB
interface.
Signed-off-by: NRolf Manderscheid <rvm@obsidianresearch.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use
get_online_cpus and put_online_cpus instead as it highlights the
refcount semantics in these operations.

The new API guarantees protection against the cpu-hotplug operation, but
it doesn't guarantee serialized access to any of the local data
structures. Hence the changes needs to be reviewed.

In case of pseries_add_processor/pseries_remove_processor, use
cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the
cpu_present_map there.
Signed-off-by: NGautham R Shenoy <ego@in.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

There is no need for kobject_unregister() anymore, thanks to Kay's
kobject cleanup changes, so replace all instances of it with
kobject_put().


Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This converts the code to use the new kobject functions, cleaning up the
logic in doing so.

Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The kobject in the bridge code is only used for registering with sysfs,
not for any lifespan rules.  This patch changes it to be only a pointer
and use the simpler api for this kind of thing.

Cc: Stephen Hemminger <shemminger@linux-foundation.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit 81100eb8 for the
release, to avoid the unnecessary warning noise that is only really
relevant to wireless driver developers.

The warning will probably go right back in after I cut the release, but
at least we won't unnecessarily worry users.
Acked-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

As it is ip_append_data only counts page fragments to the skb that
allocated it.  As such it means that the first skb gets hit with a
4K charge even though it might have only used a fraction of it while
all subsequent skb's that use the same page gets away with no charge
at all.

This bug was exposed by the UDP accounting patch.

[ The wmem_alloc bumping needs to be moved with the truesize,
  noticed by Takahiro Yasui.  -DaveM ]
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>