Impact: API *CHANGE*. Must update all tracepoint users.

Add DEFINE_TRACE() to tracepoints to let them declare the tracepoint
structure in a single spot for all the kernel. It helps reducing memory
consumption, especially when declaring a lot of tracepoints, e.g. for
kmalloc tracing.

*API CHANGE WARNING*: now, DECLARE_TRACE() must be used in headers for
tracepoint declarations rather than DEFINE_TRACE(). This is the sane way
to do it. The name previously used was misleading.

Updates scheduler instrumentation to follow this API change.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Use module notifiers for tracepoint updates rather than adding a hook in
module.c.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix race

Set the probe array pointer to NULL when the tracepoint is disabled.
The probe array point not being NULL could generate a race condition
where the reader would dereference a freed pointer.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new API

Add a new API trace_mark_tp(), which declares a marker within a
tracepoint probe. When the marker is activated, the tracepoint is
automatically enabled.

No branch test is used at the marker site, because it would be a
duplicate of the branch already present in the tracepoint.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: cleanup

Use module notifiers instead of adding a hook in module.c.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Make marker critical code use notrace to make sure they can be used as an
ftrace callback.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix marker registers/unregister race

get_marker() can return a NULL entry because the mutex is released in
the middle of those functions. Make sure we check to see if it has been
concurrently removed.
Signed-off-by: NMathieu Desnoyers <mathieu.desnoyers@polymtl.ca>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Because it has goto out before ftrace_list == &ftrace_list_end,
that's to say, we never meet this condition.
Signed-off-by: Nwalimis <walimisdev@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Pekka reported a crash when resizing the mmiotrace tracer (if only
mmiotrace is enabled).

This happens because in that case we do not allocate the max buffer,
but we try to use it.

Make ring_buffer_resize() idempotent against NULL buffers.
Reported-by: NPekka Paalanen <pq@iki.fi>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: better handling of CPU buffer start annotation

Because of the confusion with the per CPU buffers wrapping where
one CPU might be more active at the end of the trace than the other
CPUs causing that one CPU to have a shorter history. Kernel
developers were confused by the "missing" data of that one CPU
at the beginning of the trace output. An annotation was added to
the trace output to show that the buffer had started:

 # tracer: function
 #
 #           TASK-PID    CPU#    TIMESTAMP  FUNCTION
 #              | |       |          |         |
 ##### CPU 3 buffer started ####
          <idle>-0     [003]   158.192959: smp_apic_timer_interrupt
 [...]
           <idle>-0     [003]   161.556520: default_idle
 ##### CPU 1 buffer started ####
           <idle>-0     [001]   161.592494: hrtimer_force_reprogram
 [etc]

But this annotation gets a bit messy when tracers do not fill the
buffers. This patch does a couple of things:

 One) it adds a flag to trace_options to disable these annotations

 Two) it does not annotate if the tracer did not overflow its buffer.

This makes the output much cleaner.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: rename file /debug/tracing/iter_ctrl to /debug/tracing/trace_options

The original ftrace had a file called "iter_ctrl" that would control
the way the output was iterated. But this file grew into a catch all
for different trace options. This patch renames the file from iter_ctrl
to trace_options to reflect this change.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: change the units of buffer_size_kb to kilobytes

This patch changes the units of the buffer_size_kb file to kilobytes.
Reading and writing to the file uses kilobytes as units. To help
users to know what units are used, the output of the file now
looks like:

  # cat /debug/tracing/buffer_size_kb
  1408
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: rename of debugfs file trace_entries to buffer_size_kb

The original ftrace had fixed size entries, and the number of entries
was shown and modified via the file called trace_entries. By converting
to the unified trace buffer, we now allow for variable size entries
which makes the meaning of trace_entries pointless.

Since trace_size might be confused to the size of the trace, this patch
names it "buffer_size_kb" (thanks to Arjan van de Ven for this idea).

[ mingo@elte.hu: changed from buffer_size to buffer_size_kb ]

( Note, the units are still bytes - the next patch changes that,
  to keep the wide rename patch separate from the unit-change patch. )
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: File name change of trace_unlikely.c

The "unlikely" name for the tracer is quite ugly. We renamed all the
parts of it to "branch" and now it is time to rename the file too.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: added new branch tracer

Currently the tracing of branch profiling (unlikelys and likelys hit)
is only activated by the iter_ctrl. This patch adds a tracer called
"branch" that will just trace the branch profiling. The advantage
of adding this tracer is that it can be added to the ftrace selftests
on startup.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: rename of iter_ctrl unlikely to branch

The unlikely name is ugly. This patch converts the iter_ctrl command
"unlikely" and "nounlikely" to "branch" and "nobranch" respectively.

It also renames a lot of internal functions to use "branch" instead
of "unlikely".
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: name change of unlikely tracer and profiler

Ingo Molnar suggested changing the config from UNLIKELY_PROFILE
to BRANCH_PROFILING. I never did like the "unlikely" name so I
went one step farther, and renamed all the unlikely configurations
to a "BRANCH" variant.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Steve suggested the to change the output from this:

>  bash-3471  [003]   357.014755: [ MISS ] sched_info_dequeued:sched_stats.h:177
>  bash-3471  [003]   357.014756: [ .... ] update_curr:sched_fair.c:489
>  bash-3471  [003]   357.014758: [ .... ] calc_delta_fair:sched_fair.c:411

to this:

>  bash-3471  [003]   357.014755: [ MISS ] sched_info_dequeued:sched_stats.h:177
>  bash-3471  [003]   357.014756: [  ok  ] update_curr:sched_fair.c:489
>  bash-3471  [003]   357.014758: [  ok  ] calc_delta_fair:sched_fair.c:411

as it makes it clearer to the user what it means exactly.
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: modify the tracer output, to make it a bit easier to read

Change the output from:

>  bash-3471  [003]   357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177
>  bash-3471  [003]   357.014756: [correct] update_curr:sched_fair.c:489
>  bash-3471  [003]   357.014758: [correct] calc_delta_fair:sched_fair.c:411

to:

>  bash-3471  [003]   357.014755: [ MISS ] sched_info_dequeued:sched_stats.h:177
>  bash-3471  [003]   357.014756: [ .... ] update_curr:sched_fair.c:489
>  bash-3471  [003]   357.014758: [ .... ] calc_delta_fair:sched_fair.c:411

it's good to have fields aligned vertically, and the only important
information is a prediction miss, so display only that information.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new likely/unlikely branch tracer

This patch adds a way to record the instances of the likely() and unlikely()
branch condition annotations.

When "unlikely" is set in /debugfs/tracing/iter_ctrl the unlikely conditions
will be added to any of the ftrace tracers. The change takes effect when
a new tracer is passed into the current_tracer file.

For example:

 bash-3471  [003]   357.014755: [INCORRECT] sched_info_dequeued:sched_stats.h:177
 bash-3471  [003]   357.014756: [correct] update_curr:sched_fair.c:489
 bash-3471  [003]   357.014758: [correct] calc_delta_fair:sched_fair.c:411
 bash-3471  [003]   357.014759: [correct] account_group_exec_runtime:sched_stats.h:356
 bash-3471  [003]   357.014761: [correct] update_curr:sched_fair.c:489
 bash-3471  [003]   357.014763: [INCORRECT] calc_delta_fair:sched_fair.c:411
 bash-3471  [003]   357.014765: [correct] calc_delta_mine:sched.c:1279

Which shows the normal tracer heading, as well as whether the condition was
correct "[correct]" or was mistaken "[INCORRECT]", followed by the function,
file name and line number.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: new unlikely/likely profiler

Andrew Morton recently suggested having an in-kernel way to profile
likely and unlikely macros. This patch achieves that goal.

When configured, every(*) likely and unlikely macro gets a counter attached
to it. When the condition is hit, the hit and misses of that condition
are recorded. These numbers can later be retrieved by:

  /debugfs/tracing/profile_likely    - All likely markers
  /debugfs/tracing/profile_unlikely  - All unlikely markers.

# cat /debug/tracing/profile_unlikely | head
 correct incorrect  %        Function                  File              Line
 ------- ---------  -        --------                  ----              ----
    2167        0   0 do_arch_prctl                  process_64.c         832
       0        0   0 do_arch_prctl                  process_64.c         804
    2670        0   0 IS_ERR                         err.h                34
   71230     5693   7 __switch_to                    process_64.c         673
   76919        0   0 __switch_to                    process_64.c         639
   43184    33743  43 __switch_to                    process_64.c         624
   12740    64181  83 __switch_to                    process_64.c         594
   12740    64174  83 __switch_to                    process_64.c         590

# cat /debug/tracing/profile_unlikely | \
  awk '{ if ($3 > 25) print $0; }' |head -20
   44963    35259  43 __switch_to                    process_64.c         624
   12762    67454  84 __switch_to                    process_64.c         594
   12762    67447  84 __switch_to                    process_64.c         590
    1478      595  28 syscall_get_error              syscall.h            51
       0     2821 100 syscall_trace_leave            ptrace.c             1567
       0        1 100 native_smp_prepare_cpus        smpboot.c            1237
   86338   265881  75 calc_delta_fair                sched_fair.c         408
  210410   108540  34 calc_delta_mine                sched.c              1267
       0    54550 100 sched_info_queued              sched_stats.h        222
   51899    66435  56 pick_next_task_fair            sched_fair.c         1422
       6       10  62 yield_task_fair                sched_fair.c         982
    7325     2692  26 rt_policy                      sched.c              144
       0     1270 100 pre_schedule_rt                sched_rt.c           1261
    1268    48073  97 pick_next_task_rt              sched_rt.c           884
       0    45181 100 sched_info_dequeued            sched_stats.h        177
       0       15 100 sched_move_task                sched.c              8700
       0       15 100 sched_move_task                sched.c              8690
   53167    33217  38 schedule                       sched.c              4457
       0    80208 100 sched_info_switch              sched_stats.h        270
   30585    49631  61 context_switch                 sched.c              2619

# cat /debug/tracing/profile_likely | awk '{ if ($3 > 25) print $0; }'
   39900    36577  47 pick_next_task                 sched.c              4397
   20824    15233  42 switch_mm                      mmu_context_64.h     18
       0        7 100 __cancel_work_timer            workqueue.c          560
     617    66484  99 clocksource_adjust             timekeeping.c        456
       0   346340 100 audit_syscall_exit             auditsc.c            1570
      38   347350  99 audit_get_context              auditsc.c            732
       0   345244 100 audit_syscall_entry            auditsc.c            1541
      38     1017  96 audit_free                     auditsc.c            1446
       0     1090 100 audit_alloc                    auditsc.c            862
    2618     1090  29 audit_alloc                    auditsc.c            858
       0        6 100 move_masked_irq                migration.c          9
       1      198  99 probe_sched_wakeup             trace_sched_switch.c 58
       2        2  50 probe_wakeup                   trace_sched_wakeup.c 227
       0        2 100 probe_wakeup_sched_switch      trace_sched_wakeup.c 144
    4514     2090  31 __grab_cache_page              filemap.c            2149
   12882   228786  94 mapping_unevictable            pagemap.h            50
       4       11  73 __flush_cpu_slab               slub.c               1466
  627757   330451  34 slab_free                      slub.c               1731
    2959    61245  95 dentry_lru_del_init            dcache.c             153
     946     1217  56 load_elf_binary                binfmt_elf.c         904
     102       82  44 disk_put_part                  genhd.h              206
       1        1  50 dst_gc_task                    dst.c                82
       0       19 100 tcp_mss_split_point            tcp_output.c         1126

As you can see by the above, there's a bit of work to do in rethinking
the use of some unlikelys and likelys. Note: the unlikely case had 71 hits
that were more than 25%.

Note:  After submitting my first version of this patch, Andrew Morton
  showed me a version written by Daniel Walker, where I picked up
  the following ideas from:

  1)  Using __builtin_constant_p to avoid profiling fixed values.
  2)  Using __FILE__ instead of instruction pointers.
  3)  Using the preprocessor to stop all profiling of likely
       annotations from vsyscall_64.c.

Thanks to Andrew Morton, Arjan van de Ven, Theodore Tso and Ingo Molnar
for their feed back on this patch.

(*) Not ever unlikely is recorded, those that are used by vsyscalls
 (a few of them) had to have profiling disabled.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Theodore Tso <tytso@mit.edu>
Cc: Arjan van de Ven <arjan@infradead.org>
Cc: Steven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: deadlock fix in ring_buffer_read_start

The ring_buffer_iter_reset was called from ring_buffer_read_start
where both grabbed the reader_lock.

This patch separates out the internals of ring_buffer_iter_reset
to its own function so that both APIs may grab the reader_lock.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: disable preemption when calling sched_clock()

The ring_buffer_time_stamp still uses sched_clock as its counter.
But it is a bug to call it with preemption enabled. This requirement
should not be pushed to the ring_buffer_time_stamp callers, so
the ring_buffer_time_stamp needs to disable preemption when calling
sched_clock.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Split the boot tracer entries in two parts: call and return

Now that we are using the sched tracer from the boot tracer, we want
to use the same timestamp than the ring-buffer to have consistent time
captures between sched events and initcall events.

So we get rid of the old time capture by the boot tracer and split the
initcall events in two parts: call and return. This way we have the
ring buffer timestamp of both.

An example trace:

[   27.904149584] calling  net_ns_init+0x0/0x1c0 @ 1
[   27.904429624] initcall net_ns_init+0x0/0x1c0 returned 0 after 0 msecs
[   27.904575926] calling  reboot_init+0x0/0x20 @ 1
[   27.904655399] initcall reboot_init+0x0/0x20 returned 0 after 0 msecs
[   27.904800228] calling  sysctl_init+0x0/0x30 @ 1
[   27.905142914] initcall sysctl_init+0x0/0x30 returned 0 after 0 msecs
[   27.905287211] calling  ksysfs_init+0x0/0xb0 @ 1
 ##### CPU 0 buffer started ####
            init-1     [000]    27.905395:      1:120:R   + [001]    11:115:S
 ##### CPU 1 buffer started ####
          <idle>-0     [001]    27.905425:      0:140:R ==> [001]    11:115:R
            init-1     [000]    27.905426:      1:120:D ==> [000]     0:140:R
          <idle>-0     [000]    27.905431:      0:140:R   + [000]     4:115:S
          <idle>-0     [000]    27.905451:      0:140:R ==> [000]     4:115:R
     ksoftirqd/0-4     [000]    27.905456:      4:115:S ==> [000]     0:140:R
           udevd-11    [001]    27.905458:     11:115:R   + [001]    14:115:R
          <idle>-0     [000]    27.905459:      0:140:R   + [000]     4:115:S
          <idle>-0     [000]    27.905462:      0:140:R ==> [000]     4:115:R
           udevd-11    [001]    27.905462:     11:115:R ==> [001]    14:115:R
     ksoftirqd/0-4     [000]    27.905467:      4:115:S ==> [000]     0:140:R
          <idle>-0     [000]    27.905470:      0:140:R   + [000]     4:115:S
          <idle>-0     [000]    27.905473:      0:140:R ==> [000]     4:115:R
     ksoftirqd/0-4     [000]    27.905476:      4:115:S ==> [000]     0:140:R
          <idle>-0     [000]    27.905479:      0:140:R   + [000]     4:115:S
          <idle>-0     [000]    27.905482:      0:140:R ==> [000]     4:115:R
     ksoftirqd/0-4     [000]    27.905486:      4:115:S ==> [000]     0:140:R
           udevd-14    [001]    27.905499:     14:120:X ==> [001]    11:115:R
           udevd-11    [001]    27.905506:     11:115:R   + [000]     1:120:D
          <idle>-0     [000]    27.905515:      0:140:R ==> [000]     1:120:R
           udevd-11    [001]    27.905517:     11:115:S ==> [001]     0:140:R
[   27.905557107] initcall ksysfs_init+0x0/0xb0 returned 0 after 3906 msecs
[   27.905705736] calling  init_jiffies_clocksource+0x0/0x10 @ 1
[   27.905779239] initcall init_jiffies_clocksource+0x0/0x10 returned 0 after 0 msecs
[   27.906769814] calling  pm_init+0x0/0x30 @ 1
[   27.906853627] initcall pm_init+0x0/0x30 returned 0 after 0 msecs
[   27.906997803] calling  pm_disk_init+0x0/0x20 @ 1
[   27.907076946] initcall pm_disk_init+0x0/0x20 returned 0 after 0 msecs
[   27.907222556] calling  swsusp_header_init+0x0/0x30 @ 1
[   27.907294325] initcall swsusp_header_init+0x0/0x30 returned 0 after 0 msecs
[   27.907439620] calling  stop_machine_init+0x0/0x50 @ 1
            init-1     [000]    27.907485:      1:120:R   + [000]     2:115:S
            init-1     [000]    27.907490:      1:120:D ==> [000]     2:115:R
        kthreadd-2     [000]    27.907507:      2:115:R   + [001]    15:115:R
          <idle>-0     [001]    27.907517:      0:140:R ==> [001]    15:115:R
        kthreadd-2     [000]    27.907517:      2:115:D ==> [000]     0:140:R
          <idle>-0     [000]    27.907521:      0:140:R   + [000]     4:115:S
          <idle>-0     [000]    27.907524:      0:140:R ==> [000]     4:115:R
           udevd-15    [001]    27.907527:     15:115:D   + [000]     2:115:D
     ksoftirqd/0-4     [000]    27.907537:      4:115:S ==> [000]     2:115:R
           udevd-15    [001]    27.907537:     15:115:D ==> [001]     0:140:R
        kthreadd-2     [000]    27.907546:      2:115:R   + [000]     1:120:D
        kthreadd-2     [000]    27.907550:      2:115:S ==> [000]     1:120:R
            init-1     [000]    27.907584:      1:120:R   + [000]    15:  0:D
            init-1     [000]    27.907589:      1:120:R   + [000]     2:115:S
            init-1     [000]    27.907593:      1:120:D ==> [000]    15:  0:R
           udevd-15    [000]    27.907601:     15:  0:S ==> [000]     2:115:R
 ##### CPU 0 buffer started ####
        kthreadd-2     [000]    27.907616:      2:115:R   + [001]    16:115:R
 ##### CPU 1 buffer started ####
          <idle>-0     [001]    27.907620:      0:140:R ==> [001]    16:115:R
        kthreadd-2     [000]    27.907621:      2:115:D ==> [000]     0:140:R
           udevd-16    [001]    27.907625:     16:115:D   + [000]     2:115:D
          <idle>-0     [000]    27.907628:      0:140:R   + [000]     4:115:S
           udevd-16    [001]    27.907629:     16:115:D ==> [001]     0:140:R
          <idle>-0     [000]    27.907631:      0:140:R ==> [000]     4:115:R
     ksoftirqd/0-4     [000]    27.907636:      4:115:S ==> [000]     2:115:R
        kthreadd-2     [000]    27.907644:      2:115:R   + [000]     1:120:D
        kthreadd-2     [000]    27.907647:      2:115:S ==> [000]     1:120:R
            init-1     [000]    27.907657:      1:120:R   + [001]    16:  0:D
          <idle>-0     [001]    27.907666:      0:140:R ==> [001]    16:  0:R
[   27.907703862] initcall stop_machine_init+0x0/0x50 returned 0 after 0 msecs
[   27.907850704] calling  filelock_init+0x0/0x30 @ 1
[   27.907926573] initcall filelock_init+0x0/0x30 returned 0 after 0 msecs
[   27.908071327] calling  init_script_binfmt+0x0/0x10 @ 1
[   27.908165195] initcall init_script_binfmt+0x0/0x10 returned 0 after 0 msecs
[   27.908309461] calling  init_elf_binfmt+0x0/0x10 @ 1
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Cleanups on the boot tracer and ftrace

This patch bring some cleanups about the boot tracer headers. The
functions and structures of this tracer have nothing related to ftrace
and should have so their own header file.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: Restructure WARN_ONs in ring_buffer.c

The current WARN_ON macros in ring_buffer.c are quite ugly.

This patch cleans them up and uses a single RB_WARN_ON that returns
the value of the condition. This allows the caller to abort the
function if the condition is true.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: enable/disable ring buffer recording API added

Several kernel developers have requested that there be a way to stop
recording into the ring buffers with a simple switch that can also
be enabled from userspace. This patch addes a new kernel API to the
ring buffers called:

 tracing_on()
 tracing_off()

When tracing_off() is called, all ring buffers will not be able to record
into their buffers.

tracing_on() will enable the ring buffers again.

These two act like an on/off switch. That is, there is no counting of the
number of times tracing_off or tracing_on has been called.

A new file is added to the debugfs/tracing directory called

  tracing_on

This allows for userspace applications to also flip the switch.

  echo 0 > debugfs/tracing/tracing_on

disables the tracing.

  echo 1 > /debugfs/tracing/tracing_on

enables it.

Note, this does not disable or enable any tracers. It only sets or clears
a flag that needs to be set in order for the ring buffers to write to
their buffers. It is a global flag, and affects all ring buffers.

The buffers start out with tracing_on enabled.

There are now three flags that control recording into the buffers:

 tracing_on: which affects all ring buffer tracers.

 buffer->record_disabled: which affects an allocated buffer, which may be set
     if an anomaly is detected, and tracing is disabled.

 cpu_buffer->record_disabled: which is set by tracing_stop() or if an
     anomaly is detected. tracing_start can not reenable this if
     an anomaly occurred.

The userspace debugfs/tracing/tracing_enabled is implemented with
tracing_stop() but the user space code can not enable it if the kernel
called tracing_stop().

Userspace can enable the tracing_on even if the kernel disabled it.
It is just a switch used to stop tracing if a condition was hit.
tracing_on is not for protecting critical areas in the kernel nor is
it for stopping tracing if an anomaly occurred. This is because userspace
can reenable it at any time.

Side effect: With this patch, I discovered a dead variable in ftrace.c
  called tracing_on. This patch removes it.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: serialize reader accesses to individual CPU ring buffers

The code in the ring buffer expects only one reader at a time, but currently
it puts that requirement on the caller. This is not strong enough, and this
patch adds a "reader_lock" that serializes the access to the reader API
of the ring buffer.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Clear buddies on yield, so that the buddy rules don't schedule them
despite them being placed right-most.

This fixed a performance regression with yield-happy binary JVMs.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Tested-by: NLin Ming <ming.m.lin@intel.com>

Impact: fix incorrect locking triggered during hotplug-intense stress-tests

While migrating the the CB_IRQSAFE_UNLOCKED timers during a cpu-offline,
we queue them on the cb_pending list, so that they won't go
stale.

Thus, when the callbacks of the timers run from the softirq context,
they could run into potential deadlocks, since these callbacks
assume that they're running with irq's disabled, thereby annoying
lockdep!

Fix this by emulating hardirq context while running these callbacks from
the hrtimer softirq.

=================================
[ INFO: inconsistent lock state ]
2.6.27 #2
--------------------------------
inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
ksoftirqd/0/4 [HC0[0]:SC1[1]:HE1:SE0] takes:
 (&rq->lock){++..}, at: [<c011db84>] sched_rt_period_timer+0x9e/0x1fc
{in-hardirq-W} state was registered at:
  [<c014103c>] __lock_acquire+0x549/0x121e
  [<c0107890>] native_sched_clock+0x88/0x99
  [<c013aa12>] clocksource_get_next+0x39/0x3f
  [<c0139abc>] update_wall_time+0x616/0x7df
  [<c0141d6b>] lock_acquire+0x5a/0x74
  [<c0121724>] scheduler_tick+0x3a/0x18d
  [<c047ed45>] _spin_lock+0x1c/0x45
  [<c0121724>] scheduler_tick+0x3a/0x18d
  [<c0121724>] scheduler_tick+0x3a/0x18d
  [<c012c436>] update_process_times+0x3a/0x44
  [<c013c044>] tick_periodic+0x63/0x6d
  [<c013c062>] tick_handle_periodic+0x14/0x5e
  [<c010568c>] timer_interrupt+0x44/0x4a
  [<c0150c9f>] handle_IRQ_event+0x13/0x3d
  [<c0151c14>] handle_level_irq+0x79/0xbd
  [<c0105634>] do_IRQ+0x69/0x7d
  [<c01041e4>] common_interrupt+0x28/0x30
  [<c047007b>] aac_probe_one+0x1a3/0x3f3
  [<c047ec2d>] _spin_unlock_irqrestore+0x36/0x39
  [<c01512b4>] setup_irq+0x1be/0x1f9
  [<c065d70b>] start_kernel+0x259/0x2c5
  [<ffffffff>] 0xffffffff
irq event stamp: 50102
hardirqs last  enabled at (50102): [<c047ebf4>] _spin_unlock_irq+0x20/0x23
hardirqs last disabled at (50101): [<c047edc2>] _spin_lock_irq+0xa/0x4b
softirqs last  enabled at (50088): [<c0128ba6>] do_softirq+0x37/0x4d
softirqs last disabled at (50099): [<c0128ba6>] do_softirq+0x37/0x4d

other info that might help us debug this:
no locks held by ksoftirqd/0/4.

stack backtrace:
Pid: 4, comm: ksoftirqd/0 Not tainted 2.6.27 #2
 [<c013f6cb>] print_usage_bug+0x13e/0x147
 [<c013fef5>] mark_lock+0x493/0x797
 [<c01410b1>] __lock_acquire+0x5be/0x121e
 [<c0141d6b>] lock_acquire+0x5a/0x74
 [<c011db84>] sched_rt_period_timer+0x9e/0x1fc
 [<c047ed45>] _spin_lock+0x1c/0x45
 [<c011db84>] sched_rt_period_timer+0x9e/0x1fc
 [<c011db84>] sched_rt_period_timer+0x9e/0x1fc
 [<c01210fd>] finish_task_switch+0x41/0xbd
 [<c0107890>] native_sched_clock+0x88/0x99
 [<c011dae6>] sched_rt_period_timer+0x0/0x1fc
 [<c0136dda>] run_hrtimer_pending+0x54/0xe5
 [<c011dae6>] sched_rt_period_timer+0x0/0x1fc
 [<c0128afb>] __do_softirq+0x7b/0xef
 [<c0128ba6>] do_softirq+0x37/0x4d
 [<c0128c12>] ksoftirqd+0x56/0xc5
 [<c0128bbc>] ksoftirqd+0x0/0xc5
 [<c0134649>] kthread+0x38/0x5d
 [<c0134611>] kthread+0x0/0x5d
 [<c0104477>] kernel_thread_helper+0x7/0x10
 =======================
Signed-off-by: NGautham R Shenoy <ego@in.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: N"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add new tracing plugin which can trace full (entry+exit) function calls

This tracer uses the low level function return ftrace plugin to
measure the execution time of the kernel functions.

The first field is the caller of the function, the second is the
measured function, and the last one is the execution time in
nanoseconds.

- v3:

- HAVE_FUNCTION_RET_TRACER have been added. Each arch that support ftrace return
  should enable it.
- ftrace_return_stub becomes ftrace_stub.
- CONFIG_FUNCTION_RET_TRACER depends now on CONFIG_FUNCTION_TRACER
- Return traces printing can be used for other tracers on trace.c
- Adapt to the new tracing API (no more ctrl_update callback)
- Correct the check of "disabled" during insertion.
- Minor changes...
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: add infrastructure for function-return tracing

Add low level support for ftrace return tracing.

This plug-in stores return addresses on the thread_info structure of
the current task.

The index of the current return address is initialized when the task
is the first one (init) and when a process forks (the child). It is
not needed when a task does a sys_execve because after this syscall,
it still needs to return on the kernel functions it called.

Note that the code of return_to_handler has been suggested by Steven
Rostedt as almost all of the ideas of improvements in this V3.

For purpose of security, arch/x86/kernel/process_32.c is not traced
because __switch_to() changes the current task during its execution.
That could cause inconsistency in the stored return address of this
function even if I didn't have any crash after testing with tracing on
this function enabled.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

This patch replaces most of the BUG_ONs in the ring_buffer code with
RB_WARN_ON variants. It adds some more variants as needed for the
replacement. This lets the buffer die nicely and still warn the user.

One BUG_ON remains in the code, and that is because it detects a
bad pointer passed in by the calling function, and not a bug by
the ring buffer code itself.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: stop ftrace_special from recursion

The ftrace_special is used to help debug areas of the kernel.
Because of this, if it is put in certain locations, the fact that
it allows recursion can become a problem if the kernel developer
using does not realize that.

This patch changes ftrace_special to not allow recursion into itself
to make it more robust.

It also changes from preempt disable interrupts disable to prevent
any loss of trace entries.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: fix hang/crash on ia64 under high load

This is ugly, but the simplest patch by far.

Unlike other similar routines, account_group_exec_runtime() could be
called "implicitly" from within scheduler after exit_notify(). This
means we can race with the parent doing release_task(), we can't just
check ->signal != NULL.

Change __exit_signal() to do spin_unlock_wait(&task_rq(tsk)->lock)
before __cleanup_signal() to make sure ->signal can't be freed under
task_rq(tsk)->lock. Note that task_rq_unlock_wait() doesn't care
about the case when tsk changes cpu/rq under us, this should be OK.

Thanks to Ingo who nacked my previous buggy patch.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Reported-by: NDoug Chapman <doug.chapman@hp.com>

Impact: removal of unnecessary looping

The lockless part of the ring buffer allows for reentry into the code
from interrupts. A timestamp is taken, a test is preformed and if it
detects that an interrupt occurred that did tracing, it tries again.

The problem arises if the timestamp code itself causes a trace.
The detection will detect this and loop again. The difference between
this and an interrupt doing tracing, is that this will fail every time,
and cause an infinite loop.

Currently, we test if the loop happens 1000 times, and if so, it will
produce a warning and disable the ring buffer.

The problem with this approach is that it makes it difficult to perform
some types of tracing (tracing the timestamp code itself).

Each trace entry has a delta timestamp from the previous entry.
If a trace entry is reserved but and interrupt occurs and traces before
the previous entry is commited, the delta timestamp for that entry will
be zero. This actually makes sense in terms of tracing, because the
interrupt entry happened before the preempted entry was commited, so
one may consider the two happening at the same time. The order is
still preserved in the buffer.

With this idea, instead of trying to get a new timestamp if an interrupt
made it in between the timestamp and the test, the entry could simply
make the delta zero and continue. This will prevent interrupts or
tracers in the timer code from causing the above loop.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: fix for bug on resize

This patch addresses the bug found here:

 http://bugzilla.kernel.org/show_bug.cgi?id=11996

When ftrace converted to the new unified trace buffer, the resizing of
the buffer was not protected as much as it was originally. If tracing
is performed while the resize occurs, then the buffer can be corrupted.

This patch disables all ftrace buffer modifications before a resize
takes place.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>

Impact: nohz powersavings and wakeup regression

commit fb02fbc1 (NOHZ: restart tick
device from irq_enter()) causes a serious wakeup regression.

While the patch is correct it does not take into account that spurious
wakeups happen on x86. A fix for this issue is available, but we just
revert to the .27 behaviour and let long running softirqs screw
themself.

Disable it for now.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Impact: avoid spurious ksoftirqd wakeups

The tick idle check which is called from irq_enter() was run before
the call to __irq_enter() which did not set the in_interrupt() bits in
preempt_count. That way the raise of a softirq woke up softirqd for
nothing as the softirq was handled on return from interrupt.

Call __irq_enter() before calling into the tick idle check code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Impact: clean up and fix debug info printout

While looking over the sched_debug code I noticed that we printed the rq
schedstats for every cfs_rq, ammend this.

Also change nr_spead_over into an int, and fix a little buglet in
min_vruntime printing.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NIngo Molnar <mingo@elte.hu>